LG | RT-44NZ31RB | LG RT-44NZ31RB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0467D
(MP02AC,
cover
require
and
quote this infor-
service.
100R/U/Z TX,
486-395A)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine tuning / Programme edit
Favourite programme
Calling the programme table
Setting
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Auto convergence
Turbo picture selection
14
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
Turbo sound selection / Sound output selection
Stereo/Dual reception / NICAM reception (option)
16
Time setting
Clock / Off time / On time
Auto sleep
19
Other functions
TV and AV modes
Auto AV switching / Child lock
Picture format / Sleep timer
21
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
23
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
24
Connection of external equipment
Aerial socket
Audio/Video in sockets
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
DVD in sockets / DTV in sockets
Monitor out sockets
27
Troubleshooting
2
9
check list
31
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
high voltage
properly, unplug it
very
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back
cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
Do not place the set on a sloping or unstable area as the casters
on the bottom of the set may cause it to move and to be damaged.
When displaying still pictures such as
mat, PIP display, and station label for
be persisted on the screen.
videogames, 4:3 picture fora long time, the image may
TO AVOID BURNING IMAGE INTO THE DISPLAY, DO NOT HAVE
A STILL IMAGE ON SCREEN FOR EXTENDED PERIOD OF TIME.
IMAGE AFTER BURN WILL NOT BE COVERED UNDER WARRANTY ie.Menus, Video games, Borders or LOGOS.
Manufactured under license from Dolby Laboratories. "Dolby"
and the double-D symbol are trademarks of Dolby Laboratories.
3
Location and function of controls
POWER
1
TV/AV
2
MULTIMEDIA
12
TURBO
SOUND
34
PICTURE
PIP
13
Remote control handset
14
Before you use the remote control
teries. See the next page.
TEXT
PR-
PR+
SWAP
MENU
INPUT
PR
15
1.
16
OK
standby
2.
TV/AV
selects TV or AV mode.
switches the set on from
standby.
3.
TURBO SOUND BUTTON
selects Turbo sound.
4.
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode 12 sub
5.
MENU
selects
PR
123
456
7
PSM
8
9
SSM
0
17
8
POSITION
SCAN
STILL
18
SIZE
MIX
9
10
TIME
SLEEP
REVEAL
M
?
LIST
19
I/II
STOP
11
REW
Q.VIEW
P/STILL
PLAY
ARC
20
21
REC
FF
6.
TELETEXT /
(With
PIP)
4
PR-
menu
SWAP
MENU
INPUT
PR
5
MUTE
6
7
8
9
PSM
0
SSM
POSITION
SCAN
STILL
SLEEP
LIST
Q.VIEW
ARC
SIZE
I/II
(Without TELETEXT/With PIP)
4
standby.
pictures.
settings.
accepts your selection
or
7.
NUMBER BUTTONS
switches the set on from
8.
PSM (Picture Status
recalls your preferred
9.
SLEEP
sets the
PR+
off to
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
adjusts
PICTURE
PIP
or
a menu.
OK
SOUND
on
VOL
6
7
POWER
switches the set
handset, please install the bat-
from
MUTE
5
VOL
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
sleep
displays
the current mode.
standby or directly
Memory)
picture setting.
select
a
number.
timer.
10. I/II
selects the language during dual language broadcast.
selects the sound output (option).
11. VCR BUTTONS
control a LG video cassette recorder.
Location and function of controls
12. MULTIMEDIA
selects Component 1,
Component 2
or
RGB-DTV modes.
POWER
1
TV/AV
13. TURBO PICTURE BUTTON
selects Turbo picture.
MULTIMEDIA
2
TURBO
SOUND
PICTURE
3
14. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
MENU
previously viewed programme.
favourite programme.
on or
18. STILL
freezes motion of the
PR
1
2
3
4
5
6
7
8
9
PSM
0
picture.
19. LIST
the programme table.
17
STILL
picture
18
format.
SLEEP
9
10
returns to the
a
previously viewed programme.
favourite programme.
11
COLOURED BUTTONS
models)
or
: These buttons
programme edit.
are
used for teletext
LIST
19
I/II
STOP
* : No function
TELETEXT
SSM
8
21. Q.VIEW
selects
VOL
off.
7
20. ARC
select your desired
OK
6
17. SSM (Sound Status Memory)
recalls your preferred sound setting.
displays
MUTE
16
VOL
16. MUTE
switches the sound
PR
5
returns to the
a
13
15
15. SWAP
selects
12
REW
Q.VIEW
P/STILL
PLAY
ARC
20
21
REC
FF
(only
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
are
(Without PIP/TELETEXT)
Battery
installation
SOUND
PICTURE
TEXT
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
14
-
MENU
PR
MUTE
5
7
PSM
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
INDEX
SIZE
TIME
I/II
STOP
9
SSM
0
UPDATE
MIX
6
8
SLEEP
HOLD
REVEAL
M
Q.VIEW
P/STILL
?
LIST
ARC
REC
(With TELETEXT/Without PIP)
5
Location and function of controls
Front
?
panel
RT-44NZ31 series
S-VIDEOL/MN
2
10
TVAV
MNU
OK
NDEX
VOL
AUDIO
PR
R
AV3
1
(Side panel)
TV/AV
3
1.
5
4
MAIN POWER
switches the set
8.
on or
off.
REMOTE CONTROL SENSOR
3.
(Light Emitting Diode) DISPLAY
Option : Only RT-44/49/54NA62 series,
: PAL/SECAM input signal indicator
: STEREO sound indicator
: SLEEP timer indicator
: CHILD LOCK setting indicator
: RGB-DTV input signal indicator
9.
LED
PAL
brightly
or
on
from
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
(AV3)
equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
Connect the video out socket of
(S-AV)
on.
Connect the
*
standby.
audio
out
sockets
OK
displays
CASTERS (on the bottom)
turn and move the set
a menu.
or
S-VIDEO
an
VCR to the S-VIDEO socket.
MENU
accepts your selection
6
off.
Connect the audio/video out sockets of exter-
standby
AV mode.
switches the set
mode.
on or
VIDEO VCR to the audio sockets
selects TV
7.
9
10. AUDIO/VIDEO IN SOCKETS
TV/AV
selects
8
PR
INDEX
nal
when the set is in
dims when the set is switched
6.
VOL
a programme or a menu item.
switches the set on from standby.
mode.
5.
67
INDEX
selects
POWER/STANDBY INDICATOR
illuminates
OK
switches LED DISPLAY
2.
4.
MENU
the current
easily.
of the
as
S-
in AV3.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV,
MULTIMEDIA or NUMBER buttons on the remote control handset
to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
programme number with the D / E
or
adjustment
SOUND
MENU
adjust
or
PR
MUTE
the volume.
VOL
Press the Q.VIEW
MULTIMEDIA
TURBO
NUMBER
Quick view
Note
TV/AV
SWAP
Press the F / G button to
were
POWER
OK
VOL
SWAP button to view the last programme you
watching.
:
This function works
only when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
favorite programme.
PR
Mute function
1
2
3
display
4
5
6
G, I/II, TURBO
7
8
9
0
SSM
Press the MUTE button. The sound is switched off and the
W appears.
You can cancel it by pressing the
SOUND or SSM button.
MUTE,
F
/
Auto Demonstration
To review all the menus programmed in the set, press the OK button of the front panel control for about 10 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
on
the
Q.VIEW
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
3.
Press the G button and then D / E button to select Language.
Press the G button and then D / E button to select your desired
4.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
2.
I/II
language.
viewing.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
3.
Press the G button and then D / E button to select a menu
item.
Press the G button to display the sub menu or the pull-down
4.
Change
2.
menu.
the
setting
of
an
item in the sub
or
pull-down
menu
with
F/GorD/E.
can move to the higher level menu with OK or F button and
to move to the lower level menu press the G button.
You
MENU
VOL
Note :
In AV modes, if you adjust the Station menu, AV modes return
a.
to the TV mode.
b. In the teletext mode, menus are not displayed.
In some models, the Language will not display.
c.
PR
OK
VOL
Station
Picture
Auto programme
Manual programme
Programme
edit
Favourite programme
PSM
G
Contrast
G
G
Brightness
G
G
Colour
G
Sharpness
G
Auto convergence
G
G
G
PR
DEOF GOOKOMENU
DEOF GOOKOMENU
Station
Picture
menu
menu
Sound
SSM
G
AVL
G
Balance
G
DEOF GOOKOMENU
Sound
Time
Special
Input
Language
G
Clock
G
G
Off time
G
Child lock
G
On time
G
G
Auto
G
Screen
DEOF GOOKOMENU
Special
8
menu
menu
sleep
DEOF GOOKOMENU
Time
menu
Setting up
TV stations
Station
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
Auto programme
Manual programme
Programme
2.
G
G
G
Favourite programme
G
be stored.
tuning
DEOF GOOKOMENU
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
edit
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
Press the G button to
display
the Auto programme
menu.
Auto programme
System
Storage
G
from
Start
G
BGI
G
DK
M
MENU
PR
DEOF GOOKOMENU
Press the G button. Select a TV system with the D / E button
the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
5.
Press the OK or F button.
6.
Press the D / E button to select Storage from.
7.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
8.
Press the OK button.
9.
Press the D / E button to select Start.
10. Press the G button to begin auto programming.
4.
on
VOL
OK
VOL
PR
1
2
3
4
5
6
7
8
9
0
Auto programme
System
Storage
Start
G
from
G
G
-----(BG)
7
45%
MENU
All receivable stations are stored.
Option: In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
lowed by a number see 'Assigning a station name' section to
assign the station name.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
-----
viewing.
9
Setting up
Station
TV stations
Manual programme
Auto programme
Manual programme
Programme
edit
G
G
Favourite programme
G
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
DEOF GOOKOMENU
tuning
G
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Manual
programme.
Press the G button to display the Manual programme menu.
Manual programme
Storage
System
G
Channel
G
5
G
Fine
G
Search
G
Name
G
Booster
G
DEOF GOOKOMENU
MENU
VOL
4.
5.
PR
OK
VOL
6.
7.
8.
PR
1
2
3
4
5
6
7
8
9
9.
10.
11.
0
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF or
Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
G
Channel
G
Fine
G
Search
G
Name
G
Booster
G
G
GGG
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
TV stations
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
Station
1 to 3.
Auto programme
Manual programme
Press the D / E button to select Name.
Press the G button on the Name pull-down menu.
Press the D button. You can use the alphabet A to Z, the numeric
Programme
edit
G
G
G
Favourite programme
G
0to9anda+, -,blank.
5.
6.
7.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
DEOF GOOKOMENU
viewing.
Booster
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
Press the G button.
Press the D / E button to select On or Off on the Booster
Repeat
pull-down
5.
6.
Repeatedly
viewing.
or F
button.
the
MENU button to return to normal TV
press
VOL
OK
VOL
tuning
Normally
1.
2.
3.
PR
menu.
Press the OK
Fine
MENU
fine
tuning
is
only necessary
if
reception
is poor.
PR
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Press the G button.
Repeat
Manual programme
Storage
System
G
Channel
G
Fine
G
G
Name
G
Booster
G
2
3
4
5
6
7
8
9
0
G
Search
1
GGG
F GOOKOMENU
4.
5.
6.
Press the F / G button to fine tune for the best picture and
sound on the Fine pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will
during programme selection.
be indicated
by yellow
number
11
Setting up
Station
Auto programme
Manual programme
Programme
edit
Programme
G
G
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
DEOF GOOKOMENU
edit
G
G
Favourite programme
TV stations
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E
button to select
Programme edit.
Press the G button to display the Programme edit menu.
Programme
0
1
2
3
4
edit
5C05
-----
6
-----
7
-----
8
-----
9
-----
Delete
-----
-----
-----
-----
Copy
Skip
Move
DEF GOOKOMENU
MENU
Deleting
PR
1.
2.
VOL
VOL
a programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
a programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
or F
one
/ G button.
position.
Moving
PR
1
2
3
4
5
6
7
8
9
1.
2.
3.
a programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
Programme
0
0
1
2
3
4
again
to release this function.
edit
-----
-----
-----
-----
-----
5C05
6
7
8
9
-----
-----
-----
-----
Move Off
DEF GOOKOMENU
a programme number
Select a programme number to be skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Repeatedly press
12
the MENU button to return to normal TV
viewing.
Setting up
TV stations
Station
Favourite programme
This function lets you select your favourite programmes
1.
2.
Programme
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Favourite
programme.
3.
Auto programme
Manual programme
directly.
Press the
G
button to
edit
G
G
G
Favourite programme
G
the Favourite programme
display
menu.
DEOF GOOKOMENU
Favourite programme
Auto programme
Manual programme
Programme
G
G
edit
G
On
---
---
---
Favourite programme
-----
-----
-----
G
---
-----
---
-----
---
-----
---
-----
---
-----
F GO0-9ODEOOKOMENU
4.
5.
6.
7.
8.
9.
Press the F / G button to select On.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
MENU
VOL
Repeatedly press the Q.VIEW
favourite programmes.
Calling
SWAP
or
PR
OK
VOL
SWAP button to select stored
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
PR
1
2
3
4
5
6
7
8
9
Displaying
Station
0
0
1
2
3
4
-----
-----
-----
-----
-----
5C05
6
7
8
9
-----
-----
-----
-----
LIST
Q.VIEW
DEOF GOOKOMENU
Note :
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through a programme table
are 10 (or 20) programme table pages in which contain 100
(or 200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
There
Press the LIST button to return to normal TV
viewing.
13
Picture
Picture
PSM
PSM
G
Contrast
G
Brightness
G
Colour
G
Sharpness
G
Auto convergence
G
1.
2.
3.
adjustment
(Picture Status Memory)
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
Picture
DEOF GOOKOMENU
PSM
G
Dynamic
Contrast
G
Standard
Brightness
G
Mild
Colour
G
Game
Sharpness
G
User
Auto convergence
G
DEOFOOKOMENU
4.
5.
Press the OK
Repeatedly
viewing.
You
MENU
VOL
a desired picture (Dynamic, Standard,
User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
or
VOL
Picture
You
can
ness
PR
button.
press the MENU button to return to normal TV
also recall
can
Mild, Game
PR
OK
or F
1.
2.
3.
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select the desired
picture item.
Press the G button.
Picture
PSM
Contrast
PSM
G
G
Brightness
G
Colour
G
Sharpness
G
Tint
G
Auto convergence
G
100
DEOF GOOKOMENU
4.
Press the F / G button to make appropriate adjustments on the
each sub menu.
You can also select other Picture items directly with D / E button and adjust them with F / G button.
Contrast
85
F GODEOOKOMENU
5.
6.
Press the OK button to store it for the picture.
Repeatedly press the MENU button to return to normal TV
viewing.
14
Picture
adjustment
Picture
Auto convergence
This function enables you to
adjust the colour convergence of
screen automatically during receiving the signals. When the set is
first installed or it is relocated, the picture may be unstable with
three colour ghosts (red, green, blue). This problem can be solved
by adjusting the colour convergence.
1.
2.
PSM
G
Contrast
G
Brightness
G
Colour
G
Sharpness
G
Auto convergence
G
DEOF GOOKOMENU
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Auto con-
vergence.
Auto convergence
85%
TURBO
PICTURE
3.
Press the G button to
adjust
the colour convergence
Note :
a.
The Auto convergence isn't suitable to
b.
c.
use
in
automatically.
case
of no broad-
casting signal.
MENU
green-red'.
d.
PR
The Auto convergence function will be operated about 40 seconds.
The colour of operating point will be changed in order of 'blueVOL
OK
VOL
Make the surrounding illumination dark when the screen is
unstable or the message "Ensure lights are dimmed sufficiently" is displayed on screen after operating Auto convergence. The Auto convergence will then have to be operated
again.
e.
f.
This function will be operated after about 20 minutes from
switching the set on.
Adjust the Auto convergence according to a broadcasting system (50Hz or 60Hz) each.
Turbo
picture
PR
selection
When this function is on, picture will be more brilliant and distinct
picture than normal picture. You can enjoy the Turbo picture so
much better than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.
(Turbo Picture off)
(Turbo Picture on)
15
Sound
Sound
SSM
SSM
G
AVL
G
Balance
G
You
adjustment
(Sound Status Memory)
select your
can
preferred sound setting; Dolby Virtual, Flat,
Speech and you can also adjust the sound freequalizer.
Music, Movie
quency of
1.
DEOF GOOKOMENU
2.
3.
or
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound
TV/AV
SSM
G
Dolby
AVL
G
Flat
Balance
G
Music
Virtual
Movie
Speech
User
G
DEOFOOKOMENU
MENU
PR
Dolby Virtual
Dolby Virtual lets you experience panoramic
VOL
OK
Sound Frequency Adjustment
a. Press the G button in User to
VOL
display
effects of sound.
the User sub
menu.
PR
0.1
0.5
1.5
5.0
10KHz
DEOF GOOKOMENU
SSM
b. Select a sound band by pressing the F / G button.
c. Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly press the MENU button to return to normal TV viewing.
You
desired sound (Dolby Virtual, Flat, Music,
with SSM button on the remote control.
The sound Dolby Virtual, Flat, Music, Movie and Speech are
programmed for optimum sound reproduction at the factory and
cannot be changed.
can
also recall
Movie, Speech
a
or
User)
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Dolby Virtual, Flat, Music, Movie or Speech.
Note
:
ment on
16
Sound
Sound
You
adjustment
Sound
adjustment
adjust
matically keeps
can
balance
on an
or
AVL
equal
(Auto Volume Leveler). AVL autovolume level even if you change pro-
SSM
G
AVL
G
Balance
G
grammes.
1.
2.
3.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; Balance or AVL.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
DEOF GOOKOMENU
Sound
TURBO
SSM
G
AVL
G
SOUND
GOn
Balance
Off
DEOFOOKOMENU
4.
Repeatedly press
viewing.
Note
:
PICTURE
MENU
the MENU button to return to normal TV
The AVL isn't suitable to
use
Dolby
Virtual.
Turbo sound selection
When this function is on, sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
MEGA TURBO
(Turbo Sound off)
Note
:
The Turbo Sound isn't suitable to
(Turbo Sound on)
use
Dolby
Virtual.
17
Sound
adjustment
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L : Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
Stereo/Dual
MENU
VOL
When
a programme is selected, the sound information for the station
appears after the programme number and station name disappear.
PR
OK
PR
reception
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
VOL
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language
speakers.
DUAL I+II sends
a
separate language
to each
loudspeaker.
I/II
NICAM
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
18
Time
setting
Time
Clock
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Clock.
Press the G button and then D / E button to adjust hour.
Clock
G
Off time
G
On time
G
Auto
G
sleep
Time
DEOF GOOKOMENU
Clock
G
Off time
G
On time
G
Auto
G
sleep
01 :06
DEOFOOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
PR
Off time
By using this function in On mode, the set automatically switches
off at a preset time. You must set the time correctly before using off
time function.
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Off time.
Press the G button and then D / E button to adjust hour.
VOL
OK
VOL
PR
Time
Clock
G
Off time
G
07 :00
On time
G
Off
Auto
G
sleep
DEOF GOOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
19
Time
Time
setting
On time
Clock
G
Off time
G
By using
On time
G
on
Auto
G
sleep
this function in On mode, the set automatically switches
preset time with desired program number and volume. You
must set the time
1.
2.
DEOF GOOKOMENU
at a
3.
before
correctly
using
on
time function.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select On time.
Press the G button and then D / E button to adjust hour.
Time
Clock
G
Off time
G
On time
G
01 :00
Auto
G
Pr.
sleep
Vol.
3
30
On
DEOF GOOKOMENU
4.
5.
6.
MENU
PR
7.
8.
Press
Press
Press
Press
the
the
the
the
G button and then D / E button to
G button and then D / E button to
G button and then D / E button to
adjust
adjust
adjust
minute.
Pr..
Vol..
OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
VOL
VOL
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
PR
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Time
Clock
G
Off time
G
On time
G
Auto
GOn
sleep
Off
DEOFOOKOMENU
4.
Repeatedly
viewing.
press the MENU button to return to normal TV
Note :
a.
This functions work only in standby mode.
b. If you adjust hour or minute on the on/off time menu, automatically on/off time is changed to On.
c.
To cancel the set's on/off time, set the on/off time to Off.
d.
To view the remaining on/off time, select the Time menu.
e.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
20
Other functions
Special
TV and AV modes
be set for TV or AV mode. AV mode is used when a video
Inputs
cassette recorder (VCR), or other equipment is connected to the set.
can
Input
Language
G
Child lock
G
Screen
G
G
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
DEOF GOOKOMENU
1.
Press the MENU button and then D / E button to select the
Special
2.
3.
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2, AV3, AV4, COMPONENT1, COMPONENT2 or RGBDTV on the Input pull-down menu.
TV/AV
Special
Input
Language
G
TV
G
Child lock
G
Screen
G
AV1
AV2
AV3
AV4
COMPONENT1
COMPONENT2
RGB-DTV
MENU
PR
DEOFOOKOMENU
4.
VCR connected to the AV1 sockets on the set
VCR connected to the AV2 sockets on the set
AV 3 : VCR connected to the AV3 sockets on the set
AV 4 : VCR connected to the Euro scart socket on the set
COMPONENT 1 : DVD Player connected to the COMPONENT
1 sockets on the back
COMPONENT 2 : DVD Player or SET TOP connected to the
COMPONENT 2 sockets on the back
RGB-DTV : SET TOP connected to the RGB-DTV INPUT sockets on the back
Repeatedly press the MENU button to return to normal TV
AV 1
:
AV 2
:
VOL
VOL
PR
viewing.
Alternatively you
can
select the TV
or
AV mode
by pressing
the
TV/AV button.
In AV modes, to return to TV mode, press the D / E
Auto AV
or
NUMBER buttons.
switching
If your VCR outputs switching voltage when switched to playback
with the VCR connected to the Euro scart socket, the set will auto-
matically
switch to AV4 mode when
an
AV
signal
is
input.
Press the
TV/AV button to return to AV modes.
21
Other functions
Special
Child lock
Input
Language
G
Child lock
G
Screen
G
G
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
DEOF GOOKOMENU
4.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The
any button
display
on
the
Child lock on will not appear on the screen if
front panel is pressed while displaying the
menus.
Picture format
You can watch TV in various picture formats; 16:9, 14:9, Zoom and
4:3.
In some models, you can watch TV in various picture formats; 16:9,
14:9, Zoom, Auto and 4:3
Repeatedly press the ARC button to select your desired picture format.
.
MENU
16:9
You can
PR
enjoy the cinema (the picture
through the 16:9 mode.
format of
16:9)
or
general
TV
programme
VOL
OK
VOL
14:9
The screen 14:9 is viewed just like that but the screen 4:3 is magnified to the upper / lower so that the screen 14:9 is full.
You can move the screen up or down with D / E button.
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower sides so that the
screen 16:9 is full. The bottom and top of the picture may be lost.
You can move the screen up or down with D / E button.
PR
Auto (option)
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent. (Not available in all
countries)
Note : In the double window and
available.
4:3
This
picture
format is 4 to 3 of
scan
general
mode, ARC function isn't
TV.
When you watch the TV on 4:3 mode, the screen will
every 2 hours to avoid a permanent image on the screen.
Note
:
move
SLEEP
ARC
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
---
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
c.
When you switch the set off, the set releases the preset sleep
time.
---
22
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
only the
set with PIP function can
operate.
PIP
(Picture
in
Picture) displays
a
within
picture
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
picture.
picture
Press the INPUT button to select the
input mode for
each
pressed,
input mode
the sub
Each time this button is
ture is displayed as shown below.
for the sub
Programme
number
Swapping
between main and sub
Note : When the main
available.
Programme
exchange
picture
is TV
selection for sub
Press the PR +/- buttons to select
picture
a
PR+
SWAP
INPUT
pictures
the main and sub
pictures.
AV modes, the
swapping
or
PIP
PR-
AV3
Press the SWAP button to
Sub
AV2
AV1
AV4
picture.
pic-
is
picture
programme for the sub
picture.
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/9 size of the main
1/2 size
picture
picture
(option)
Note :
a.
When the sub
b.
picture size is 1/2 of the main picture, the picture
quality might get poor.
1/2 size of the main picture is able to work in TV or AV modes
for main picture.
Sub
picture
SCAN
STILL
SIZE
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
POSITION
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 12
sub pictures and see your favourite station by exchanging the main
and sub pictures.
Press the SCAN button to select 12 sub pictures.
The selected sub pictures search all the stored stations.
Press the SCAN button again to switch off sub pictures.
Note : When the main
available.
picture
is TV
or
AV modes, the
scanning
is
23
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TEXT
Switch on/off
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
PR
OK
reappears.
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
Page
PR
1.
1
2
3
4
5
6
7
8
9
2.
lowing page.
0
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
M
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
4.
24
coloured button.
can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
PR
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
PR
1
2
3
4
5
6
7
8
9
0
lowing page.
25
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
PR
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will
display
change
to the page number.
Press this button to view the
PR
1
2
updated
teletext page.
HOLD
Stops
3
4
5
6
7
8
9
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
0
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
SIZE
MIX
TIME
REVEAL
?
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, D / E
NUMBER buttons.
change
Press
26
again
to exit this function.
or
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
VIDEO
(R)-AUDIO-(L)
Here shown may be somewhat different from your set.
OUT
S-VIDEO
AV2
RGB-DTV
()
(L)
(L)
AUDIO (R)
(R)
AUDIO
SOUND
RGB
AV1
Y
Y
PB
PB
PR
PR
-
DTV
MONO
VIDEO
AV4
ANT IN
COMPONENT1
LL
(480i/576i)
VIDEO
COMPONENT2
(480p/576p
720p/1080i)
RGB-DTV
DVD/DTV INPUT
INPUT(480p/576p/720p/1080i)
Aerial socket
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
S-VIDEO
2.
3.
(L)
(L)
AUDIO (R)
(R)
AUDO
RGB
AV1
Y
Y
PB
PB
PR
PR
-
DTV
MONO
VIDEO
ANTIN
AV4
VIDEO
COMPONENT1
COMPONENT2
(480/576i)
(480p/576p
720p/1080)
LL
DVD/DTV INPUT
Audio/Video in/out sockets
1.
VIDEO
(R)-AUDIO-(L)
OUT
AV2
RGB-DTV
SOUND
()
RGB-DTV INPUT(480p/576p/720p/1080i)
VCR
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
Press the TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
S-VIDEOL/MN
AUDIO
R
You
also record programmes received
tape via audio/video out sockets.
can
by
the TV
on
video
AV3
VCR
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Euro scart socket
(option)
(R)-AUDIO-(L)
VIDEO
OUT
S-VIDEO
1.
2.
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV4 mode automatically. But if you
want to keep on watching TV mode, press the D / E or NUMBER buttons.
Otherwise press the TV/AV button
set to select AV4. The VCR
on
AV2
RGB-DTV
()
(L)
(L)
AUDO (R)
(R)
AUDIO
SOUND
RGB
AV1
Y
Y
PB
PB
-
DTV
MONO
VIDEO
PR
ANT IN
AV4
COMPONENT1
LL
(480i/576i)
VIDEO
PR
COMPONENT2
(480p/576p
720p/1080i)
DVD/DTV INPUT
RGB-DTV INPUT(480p/576p/720p/1080i)
VCR
the remote control handon the
playback picture appears
screen.
You
can
also record programmes received
by the TV on
video tape.
27
Connection of external
equipment
S-Video / Audio in sockets
When
(R)-AUDIO-(L)
VIDEO
OUT
S-VIDEO
AV2
RGB-DTV
()
(L)
(L)
AUDIO (R)
(R)
AUDIO
SOUND
RGB DTV
-
Y
AV1
Y
(S-AV) (option)
S-VIDEO VCR to the S-VIDEO
connecting
picture quality will be further improved.
an
socket, the
MONO
VIDEO
VIDEO
PB
PB
COMPONENT1
COMPONENT2
(480i/576i)
(480p/576p
720p/1080i)
LL
1.
PR
PR
AV4
ANT IN
DVD/DTV INPUT
RGB-DTV
INPUT(480p/576p/720p/1080i)
2.
S-VIDEO VCR
3.
4.
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select AV1 or AV3 by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
S-VIDEOL/MN
DVD in sockets
AUDIO
1.
R
AV3
2.
S-VIDEO VCR
3.
4.
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD to the DVD/DTV INPUT sockets (Y PB
PR) of the set.
Connect the audio cable from the DVD to DVD/DTV INPUT
AUDIO sockets of the set.
Press the TV/AV button to select COMPONENT1 or COMPONENT2.
Press the PLAY button on the DVD.
The DVD playback picture appears on the screen.
DTV in sockets
(R)-AUDIO-(L)
VIDEO
OUT
(L)
S-VIDEO
AV2
RGB-DTV
SOUND
AUDIO
(L)
1.
AUDIO
(R)
(R)
()
RGB DTV
-
Y
Y
AV1
MONO
VIDEO
AV4
ANT IN
VIDEO
PB
PB
PR
PR
COMPONENT1
480i/576
LL
COMPONENT2
(480p/576p
720p/1080i)
RGB-DTV
DVD DTV INPUT
INPUT(480p/576p/720p/1080i)
2.
DVD
3.
4.
Connect the SET TOP outputs to the DVD/DTV INPUT sockets
(Y PB PR) on the set. (or, connect the SET TOP with the D-Sub
output socket to RGB-DTV/PC INPUT socket on the set and
audio cable of the SET TOP to the AUDIO sockets of AV2.)
Connect the audio cable from the SET TOP to DVD/DTV INPUT
AUDIO sockets of the set.
Press the TV/AV button to select COMPONENT2 or RGBDTV.
Press the MENU button and then D / E button to select the
Special
5.
6.
(R)-AUDIO-(L)
menu.
Press the G button and then D / E button to select Screen.
Press the G button to display the Screen menu.
VIDEO
OUT
(L)
AUDO (R)
(R)
S-VIDEO
(L)
AV2
RGB-DTV
()
Screen
AUDIO
SOUND
RGB DTV
-
Y
Y
PB
PB
AV1
MONO
VIDEO
COMPONENT1
LL
(480i/576i)
H-Position
G0
V-Position
G
PR
PR
AV4
ANT IN
VIDEO
COMPONENT2
(480p/576p
720p 1080i
DVD/DTV INPUT
RGB-DTV
INPUT(480p/576p/720p/1080i)
HD-SET TOP
D EOF G OKOMENU
7.
8.
(R)-AUDIO-(L)
VIDEO
OUT
S-VIDEO
AV2
RGB-DTV
()
(L)
(L)
AUDIO (R)
(R)
9.
AUDIO
SOUND
RGB DTV
-
Y
AV1
Y
viewing.
MONO
VIDEO
VIDEO
PB
PB
PR
PR
ANT IN
LL
AV4
COMPONENT1
COMPONENT2
(480i/576)
(480p/576p
720p/1080i)
DVD/DTV INPUT
Second TV
28
Press the D / E button to select the desired picture item.
Press the F / G button to make appropriate adjustments.
Repeatedly press the MENU button to return to normal TV
RGB-DTV
INPUT(480p/576p/720p/1080i)
Monitor out sockets
Connect the audio/video in sockets of the other TV
OUT sockets of the set.
or
monitor to
Note
Note
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31
Download PDF