LG | WT-32Q82IP | LG WT-32Q82IP Owner’s Manual

COLOUR TELEVISION
OWNER'S MANUAL
Before
connecting, operating or adjusting
product, please read this instruction
booklet carefully and completely.
this
3
Year
Guarantee
WT-32Q82IP
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view /
Mute function / Auto Demonstration /
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Calling the programme table
Setting
9
Picture adjustment
PSM / DRP (Digital Reality Picture)
Picture adjustment / Picture format
Turbo picture selection
14
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
Turbo sound selection
Sound output selection / Stereo/Dual reception
NICAM reception (option)
16
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Auto sleep / Blue back (option)
Tilt / Degaussing / Sleep timer
19
PIP
21
operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
22
Connection of PC
Picture adjustment / PC in socket
25
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-Video/Audio in sockets (S-AV) (option)
Component in sockets
Headphone socket
26
Troubleshooting
2
check list
28
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
placed
the ventilation
in
position to allow a free flow
openings on the back cover.
a
of air. Do not
cover
Manufactured under license from Dolby Laboratories. "Dolby"
"Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
POWER
Remote control handset
1
DRP
TV/AV
Before you use the remote control handset,
teries. See the next page.
2
TURBO
SOUND
PICTURE
3
1.
PIP
TEXT
4
PR-
PR+
SWAP
MENU
PR
3.
TURBO SOUND BUTTON
selects Turbo sound.
4.
PIP BUTTONS
MUTE
OK
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
SIZE
TIME
REVEAL
MIX
SLEEP
8
M
LIST
?
6.
ARC
9
REW
P/STILL
PLAY
REC
MENU
selects
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ (Volume
Down/Up)
adjusts the volume.
adjusts
FF
a menu.
OK
menu
settings.
accepts your selection
7.
or
NUMBER BUTTONS
switches the set on from
displays
standby
the current mode.
or
directly
select
a
number.
8.
PSM (Picture Status
recalls your preferred
9.
I/II
selects the language during dual language broadcast.
selects the sound output (option).
Memory)
picture setting.
10. VCR BUTTONS
control a LG video cassette recorder.
4
standby.
pictures.
5.
10
off to
or
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
2/12 PIP
switches on or off the programme scan mode through 12 sub
VOL
1
STOP
standby
install the bat-
INPUT
PR
I/II
from
DRP (Digital Reality Picture)
switches DRP 1250 or 100.
6
7
on
2.
5
VOL
POWER
switches the set
please
Location and function of controls
11. TV/AV
selects TV or AV mode.
clears the menu / text from the screen.
switches the set on from standby.
POWER
12. TURBO PICTURE BUTTON
selects Turbo picture.
DRP
13. TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the 'Teletext' section.
14. SWAP
returns to the
TV/AV
SOUND
PICTURE
PIP
15. MUTE
switches the sound
viewed programme.
12
TEXT
PR-
previously
11
TURBO
13
PR+
SWAP
INPUT
14
on or
MENU
off.
PR
MUTE
15
16. SSM (Sound Status Memory)
recalls your preferred sound setting.
VOL
OK
VOL
17. LIST
displays
18. SLEEP
sets the
the programme table.
sleep
timer.
PR
19. ARC
(Aspect Ratio Control)
changes the picture format.
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
Battery
are
installation
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
SIZE
TIME
REVEAL
MIX
SLEEP
16
?
-
I/II
STOP
REW
M
LIST
P/STILL
PLAY
17
18
ARC
REC
19
FF
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
POWER
1
2
3
4
S-VIDEO VIDEO L/MONO AUDIO
AV4
POWER
Back
Top panel
TV/AV
MENU
5
OK
VOL
R
panel
PR
PC INPUT
6
1.
POWER/STANDBY INDICATOR
illuminates red when the set is in standby
mode and green when the set is switched on.
2.
REMOTE CONTROL SENSOR
3.
MAIN POWER (POWER
switches the set on or off.
4.
5.
AUDIO/VIDEO IN SOCKETS (AV4)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the SVIDEO VCR to the audio sockets as in AV4.
6.
TV/AV (option)
selects TV or AV mode.
clears the menu / text from the screen.
switches the set on from standby.
7.
MENU
selects
6
8.
OK
accepts your selection
or
displays
the current
mode.
Φ / Γ
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
Δ / Ε (Programme Up/Down)
)
HEADPHONE SOCKET
Connect the headphone plug to this socket.
a menu.
9
8
7
selects a programme or a menu item.
switches the set on from standby.
9.
PC INPUT SOCKET
Connect the monitor output socket of the
PERSONAL COMPUTER to this socket.
Note : Set the resolution of PC to VGA
640x480 (60 Hz) video mode to use this set as
PC monitor.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
POWER
100/1250
TV/AV
TURBO
Programme
selection
You can select
buttons.
a
SOUND
PICTURE
PIP
programme number with the
Δ
/
Ε
or
TEXT
NUMBER
PR-
PR+
SWAP
INPUT
Volume
adjustment
Press the
Φ
/
Γ
button to
MENU
adjust
PR
MUTE
the volume.
VOL
OK
VOL
Quick view
Press the SWAP button to view the last programme you
were
watching.
PR
Mute function
Press the MUTE button. The sound is switched off and the
appears.
can cancel it
SOUND button.
You
by pressing
the MUTE,
Φ
display
/ Γ, SSM, I/II, TURBO
Auto Demonstration
in the set, press the OK butpanel control for about 5 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
To review all the
ton of the front
menus
programmed
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
I/II
STOP
REW
On
screen
language
selection
The menu can be displayed
First select your language.
on
the
SLEEP
M
ARC
P/STILL
PLAY
?
LIST
EYE
REC
FF
(option)
screen
in desired
language.
1.
2.
3.
Press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Language.
Press the Γ button and then Δ / Ε button to select your desired
4.
All the on screen displays will appear in the selected language.
Press the OK or Φ button to select the Station menu.
Press the TV/AV button to return to normal TV viewing.
language.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the Γ button and then Δ / Ε button to select a menu item.
Press the Γ button to display the sub menu or the pull-down
1.
2.
3.
Repeatedly
4.
Change
menu.
POWER
the
setting
of
an
item in the sub
or
pull-down
menu
with
Φ/ΓorΔ/Ε.
can move to the higher level menu with OK or Φ button and
to move to the lower level menu press the Γ button.
You
100/1250
TV/AV
TURBO
SOUND
PICTURE
PIP
TEXT
PR-
PR+
INPUT
MENU
SWAP
PR
Note :
In the AV mode, the Station menu is not displayed.
a.
b. In the teletext mode, menus are not displayed.
In some models, the Normal/Turbo search will not display,
c.
only the Start will display in the Auto programme menu.
d. In some models, the Language will not display
MUTE
CH.
VOL
OK
VOL
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
OBG
{
{
OOI
ProgrammeOedit
{
NormalOsearch
{
ODK
Language
{
TurboOsearch
{
OOMOO
()O{OOKOMENUOTV
AV
Station
PR
1
2
3
4
5
6
CH.
8
PSM
{
System
{
OBG
DRP
{
Channel
{
OOI
{
Fine
{
ODK
Search
{
OOMOO
Name
{
Booster
{
Storage
{
9
PSM
0
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
SLEEP
I/II
STOP
SSM
M
ARC
P/STILL
()O{OOKOMENUOTV
?
Picture
AV
PLAY
()O}{OOKOMENUOTV
AV
menu
LIST
EYE
CH.
REC
SSM
{
00O-O-O-O-O- O O05O SO 6O9
Balance
{
01O CO 0O3OO06O SO 1O7
AVL
{
02O CO 1O2OO07O SO 2O2
SuperOwoofer
{
03O SO 6O6OO08O CO 0O9
{
04O SO 6O7OO09O CO 1O1
§Volume
REW
AV
menu
User
7
()O}{OOKOMENUOTV
FF
DeleteOOOCopy
MoveOOOOOSkip
()O{OOKOMENUOTV
Sound
CH.
()O}{OOKOMENUOTV
menu
Input
{
ChildOlock
{
AutoOsleep
{
BlueOback
{
Tilt
{
Degauss
{
()O{OOKOMENUOTV
Special
TV programme
8
AV
AV
menu
AV
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the Δ / Ε
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
3.
tuning
display
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
{
Language
{
Station
Menu
{
be stored.
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1. Repeatedly press the MENU button to select the Station menu.
2. Press the Γ button and then Δ / Ε button to select Auto pro-
gramme.
Press the Γ button to
CH.
the Auto programme
menu.
()O{OOKOMENUOTV
AV
POWER
100/1250
TV/AV
TURBO
System
StorageOfrom
{
OBG
{
OOI
NormalOsearch
{
ODK
TurboOsearch
{
OOMOO
SOUND
PICTURE
PIP
TEXT
PR-
PR+
INPUT
()O}{OOKOMENUOTV
MENU
4.
5.
6.
7.
8.
9.
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
Press the OK or Φ button.
Press the Δ / Ε button to select Storage from.
Press the Γ button. Select the beginning programme number
with the Φ / Γ button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the Δ / Ε button to select Normal or Turbo search.
Option:
In
some
models, you
can
only
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
77O7O7O736%
VOL
MUTE
OK
VOL
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
{
SIZE
I/II
OOCO01O(BG)
STOP
77O7O7O736%
REW
MENU
PR
select Start.
Note :
a.
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the Γ button to begin auto programming.
System
StorageOfrom
SWAP
AV
SLEEP
M
ARC
P/STILL
PLAY
?
LIST
EYE
REC
FF
MENU
(Normal search)
(Turbo search)
All receivable stations are stored.
Option: In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
lowed by a number see 'Assigning a station name' section to
assign the station name.
-----
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Press the TV/AV button to return to normal TV viewing.
9
Setting up
Station
Menu
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
{
Language
{
()O{OOKOMENUOTV
Manual programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
Repeatedly press
Press the
3.
programme.
Press the Γ button to
PICTURE
TEXT
PR-
PR+
INPUT
MENU
PR
OK
VOL
6.
7.
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
SLEEP
STOP
REW
System
{
OBG
Channel
{
OOI
Fine
{
ODK
Search
{
OOMOO
Name
{
Booster
{
Storage
{
()O}{OOKOMENUOTV
MUTE
5.
I/II
the Manual programme
display
SWAP
4.
VOL
Γ
menu.
TV/AV
PIP
the MENU button to select the Station menu.
button and then Δ / Ε button to select Manual
1.
2.
TURBO
SOUND
tuning
AV
POWER
100/1250
{
TV stations
M
ARC
P/STILL
PLAY
8.
?
9.
10.
11.
LIST
EYE
REC
12.
13.
14.
FF
15.
AV
Press the Δ / Ε button to select System.
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
Press the OK or Φ button.
Press the Δ / Ε button to select Channel.
Press the Γ button. Press the Δ / Ε button to select V/UHF or
Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or Φ button.
Press the Δ / Ε button to select Search.
Press the Γ button. Press the Φ / Γ button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
If this station is the one required, press the OK button.
Press the Δ / Ε button to select Storage.
Press the Γ button to select Storage. Select the desired programme number (0 to 99) with the Φ / Γ button or NUMBER
buttons on the Storage pull-down menu. Any number under 10
is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or
'005') for 5.
Press the OK button to store it. The display Stored will appear.
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
Storage
{99
Stored
16. To store another station, repeat steps 4 to 15.
10
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
6.
7.
TV stations
CH.
1 to 3.
Press the Δ / Ε button to select Name.
Press the Γ button on the Name pull-down menu.
Press the Δ button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the Ε button you can select in the opposite direction.
Select the position by pressing the Φ / Γ button and then take
your choice of the second character, and so on.
Press the OK button.
Repeat the 'Manual programme tuning' steps 13 to 15.
Press the TV/AV button to return to normal TV
viewing.
3.
4.
5.
6.
the 'Manual programme tuning' steps 1 to 3.
the Δ / Ε button to select Booster.
the Γ button.
the Δ / Ε button to select On or Off on the Booster
tuning' steps
Press the TV/AV button to return to normal TV
1.
2.
3.
{
()O{OOKOMENUOTV
100/1250
fine
tuning
is
if
only necessary
pull-
PICTURE
TEXT
PR-
PR+
INPUT
VOL
SWAP
PR
MUTE
OK
VOL
13 to 15.
viewing.
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Fine.
Press the Γ button.
Repeat
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
Storage
{
}{OOKOMENUOTV
5.
6.
7.
TV/AV
PIP
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
4.
AV
POWER
MENU
tuning
Normally
{
Language
Station
Menu
{
menu.
the OK or Φ button.
Repeat the 'Manual programme
Fine
ProgrammeOedit
SOUND
Repeat
Press
Press
Press
down
Press
{
TURBO
Booster
When the interference between programmes appear, select Booster
to Off.
1.
2.
AutoOprogramme
ManualOprogramme
{{{{
I/II
STOP
REW
SLEEP
M
ARC
P/STILL
PLAY
?
LIST
EYE
REC
FF
AV
Press the Φ / Γ button to fine tune for the best picture and
sound on the Fine pull-down menu.
Press the OK button.
Repeat the 'Manual programme tuning' steps 13 to 15.
Press the TV/AV button to return to normal TV viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
11
Setting up
Station
Menu
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
{
Language
{
()O{OOKOMENUOTV
AV
{
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
the MENU button to select the Station menu.
button and then Δ
button to select
/ Ε
Programme edit.
Press the Γ button to display the Programme edit menu.
Repeatedly press
Press
POWER
the
Γ
00O-O-O-O-O- O O05O SO 6O9
01O CO 0O3OO06O SO 1O7
100/1250
02O CO 1O2OO07O SO 2O2
TV/AV
03O SO 6O6OO08O CO 0O9
04O SO 6O7OO09O CO 1O1
TURBO
SOUND
PICTURE
DeleteOOOCopy
PIP
MoveOOOOOSkip
TEXT
()O}{OOKOMENUOTV
PR-
AV
PR+
INPUT
MENU
VOL
SWAP
PR
MUTE
OK
Deleting
1.
2.
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
00O-O-O-O-O- O O05O SO 6O9
VOL
01O CO 0O3OO06O SO 1O7
02O CO 1O2OO07O SO 2O2
03O SO 6O6OO08O CO 0O9
04O SO 6O7OO09O CO 1O1
Delete
PR
1
MENUOTV
2
Copying
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
SLEEP
AV
1.
2.
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
or Φ
one
/
Γ
button.
position.
Moving
?
1.
2.
3.
a programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
I/II
M
ARC
LIST
4.
Press the YELLOW button
EYE
again
to release this function.
00O-O-O-O-O- O O05O SO 6O9
01O CO 0O3OO06O SO 1O7
STOP
P/STILL
02O CO 1O2OO07O SO 2O2
REC
03O SO 6O6OO08O CO 0O9
REW
PLAY
04O SO 6O7OO09O CO 1O1
FF
MoveOOff
()O}{OMENUOTV
AV
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the Δ / Ε button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Skipping
1.
2.
3.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
Calling
TV stations
the programme table
can check the programmes stored in the memory
the programme table.
You
Displaying programme
table
Press the LIST button to
display
the
Programme
by displaying
table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
POWER
100/1250
00O-O-O-O-O- O O05O SO 6O9
01O CO 0O3OO06O SO 1O7
TV/AV
TURBO
SOUND
02O CO 1O2OO07O SO 2O2
PICTURE
03O SO 6O6OO08O CO 0O9
04O SO 6O7OO09O CO 1O1
PIP
TEXT
PR-
()O}{OOKOMENUOTV
Note
AV
PR+
INPUT
:
MENU
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
VOL
programme in the programme table
programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
Selecting
Select
SWAP
PR
MUTE
OK
VOL
a
a
The set switches to the chosen programme number.
Paging through a programme table
There are 10 (or 20) programme table pages in which contain 100
(or 200) programmes.
Pressing the Δ / Ε or Φ / Γ button repeatedly turns the pages.
Press the TV/AV button to return to normal TV
viewing.
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
I/II
STOP
REW
SLEEP
M
ARC
P/STILL
PLAY
?
LIST
EYE
REC
FF
13
Picture
Picture
Menu
CH.
PSM
{
DRP
{
User
{
PSM
1.
2.
3.
(Picture Status Memory)
the MENU button to select the Picture menu.
button and then Δ / Ε button to select PSM.
Γ button and then Δ / Ε button to select a
picture
the PSM pull-down menu.
Repeatedly press
Press the
Press the
setting
()O{OOKOMENUOTV
adjustment
on
Γ
AV
CH.
PSM
{
Dynamic
DRP
{
Standard
User
{
Mild
Game
User
POWER
DRP
TV/AV
()O}OOKOMENUOTV
TURBO
SOUND
4.
5.
PICTURE
PIP
TEXT
You
PR-
PR+
INPUT
MENU
SWAP
PR
MUTE
OK
1.
2.
3.
VOL
1
2
3
4
5
6
7
8
9
(Digital Reality Picture)
the MENU button to select the Picture menu.
Press the Γ button and then Δ / Ε button to select DRP.
Press the Γ button and then Δ / Ε button to select 1250 or 100
on the DRP pull-down menu.
4. Press the OK or Φ button.
5. Press the TV/AV button to return to normal TV viewing.
Note : DRP is always set to 1250 in case of NTSC input, double
window mode or multipicture mode.
PR
Repeatedly press
You
can
You
PSM
0
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
SLEEP
STOP
REW
ARC
P/STILL
PLAY
100 with DRP button
or
the
?
1.
2.
3.
LIST
adjustment
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
the MENU button to select the Picture menu.
Press the Γ button and then Δ / Ε button to select User.
Press the Γ button and then Δ / Ε button to select the desired
picture item on the User pull-down menu.
Repeatedly press
EYE
CH.
REC
PSM
{
DRP
{
User
{
FF
()O}{O OKOMENUOTV
4.
5.
Press the
Press the
each sub
Γ
Φ
Contrast
{
Brightness
{
Colour
{
Sharpness
{
AV
button.
/ Γ button to make
appropriate adjustments
()O}{O OKOMENUOTV
6.
7.
on
the
menu.
Contrast
14
on
can
ness
SSM
M
also switch DRP 1250
remote control.
Picture
I/II
viewing.
also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
can
DRP
VOL
AV
Press the OK or Φ button.
Press the TV/AV button to return to normal TV
80
AV
You can also select other User items directly with Δ / Ε button
and adjust them with Φ / Γ button.
Press the OK button to store it for the picture User.
Press the TV/AV button to return to normal TV viewing.
Picture
adjustment
Picture format
CH.
You can watch TV in various picture formats; 4:3, 16:9, Zoom 1,
Zoom 2 or Auto.
Repeatedly press the ARC button to select your desired picture format.
PSM
{
DRP
{
User
{
()O{OOKOMENUOTV
4:3
This
picture
format is 4 to 3 of
general
AV
TV.
POWER
16:9
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
Zoom 1
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper / lower and left / right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
Zoom 2
You can enjoy more magnified screen in this mode. The screen
Zoom 2 is viewed just like that but the screen 16:9 is magnified to
the upper and lower so that the screen Zoom 2 is full.
Auto
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.
Note :
In the PC mode, only 16:9 picture format is available.
a.
b. In 2/12 PIP mode, ARC function isn't available.
Turbo
Picture
Menu
picture
selection
100/1250
SOUND
(Turbo Picture off)
PICTURE
PIP
TEXT
PR-
PR+
INPUT
MENU
VOL
SWAP
PR
MUTE
OK
VOL
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
When this function is on, picture will be more brilliant and distinct
picture than normal picture. You can enjoy the Turbo picture so
much better than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.
TV/AV
TURBO
I/II
STOP
REW
SLEEP
M
?
LIST
ARC
P/STILL
PLAY
REC
FF
(Turbo Picture on)
Note : If you press the PSM button with the Turbo picture function,
the Turbo picture function is automatically switched off.
15
Sound
Sound
Menu
CH.
SSM
{
Balance
{
AVL
{
SuperOwoofer
{
§Volume
{
SSM
You
(Sound Status Memory)
select your
can
AV
preferred sound setting; Dolby Virtual, Flat,
Speech and you can also adjust the sound freequalizer.
Music, Movie
quency of
()O{OOKOMENUOTV
adjustment
1.
2.
3.
POWER
or
the MENU button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
Repeatedly press
CH.
100/1250
TV/AV
TURBO
SOUND
PICTURE
PIP
{
Dolby0Virtual
Balance
{
Flat
AVL
{
SuperOwoofer
{
Music
Movie
§Volume
{
PR+
INPUT
()O}OOKOMENUOTV
AV
MUTE
Sound Frequency Adjustment
a. Press the Γ button in User to
VOL
OK
{
Dolby Virtual
Dolby Virtual lets you experience panoramic
SWAP
PR
Speech
User
TEXT
PR-
MENU
SSM
display
effects of sound.
the User sub
menu.
VOL
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENUOTV
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
SLEEP
I/II
M
ARC
LIST
EYE
Press the TV/AV button to return to normal TV
You
also recall
?
REW
16
P/STILL
PLAY
REC
FF
viewing.
desired sound (Dolby Virtual, Flat, Music,
with SSM button on the remote control.
The sound Dolby Virtual, Flat, Music, Movie and Speech are
programmed for good sound reproduction at the factory and cannot
be changed.
can
Movie, Speech
a
or
User)
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Dolby Virtual, Flat, Music, Movie or Speech.
Note
:
ment on
STOP
AV
Sound
Sound
adjustment
adjustment
CH.
You can adjust balance, headphone volume/sound, AVL (Auto
Volume Leveler) or super woofer. AVL automatically keeps on an
equal volume level even if you change programmes. The Turbo
sound creates an all around sound as in a concert hall and woofer
sound stresses and emphasized bass.
1.
2.
3.
the MENU button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select the desired
sound item; Balance, AVL, Super woofer or §Volume.
Make desired adjustment with the Φ / Γ, Δ / Ε or OK button
on each pull-down menu.
SSM
{
Balance
{
AVL
{
SuperOwoofer
{
§Volume
Sound
Menu
{
()O{OOKOMENUOTV
AV
Repeatedly press
POWER
100/1250
TV/AV
TURBO
SOUND
CH.
SSM
{
Balance
{
AVL
{
On
SuperOwoofer
{
Off
§Volume
PICTURE
PIP
TEXT
PR-
{
PR+
INPUT
()O}OOKOMENUOTV
4.
MENU
AV
Press the TV/AV button to return to normal TV
Note
:
In
Dolby
SWAP
PR
MUTE
viewing.
Virtual mode, AVL is not available.
VOL
OK
VOL
Turbo sound selection
When this function is on, sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
(Turbo Sound off)
(Turbo Sound on)
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
I/II
Sound output selection
In AV mode, you
can
select output sound for the left and
STOP
right
loud-
REW
SLEEP
M
ARC
P/STILL
PLAY
?
LIST
EYE
REC
FF
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
17
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
POWER
100/1250
TV/AV
TURBO
SOUND
PICTURE
PIP
TEXT
PR-
PR+
INPUT
MENU
SWAP
PR
MUTE
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language
If
VOL
OK
a
ton
VOL
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
a
separate language
to each
loudspeaker.
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
SLEEP
I/II
STOP
REW
M
ARC
P/STILL
PLAY
LIST
EYE
NICAM
with the receiver for NICAM reception, the
NICAM
high quality
(Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
If your set is
?
1.
2.
REC
FF
reception (option)
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
18
equipped
Other functions
TV and AV modes
CH.
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Input.
Press the Γ button and then Δ / Ε button to select TV, AV1,
AV2, AV3, AV4, DVD or VGA on the Input pull-down menu.
Input
{
ChildOlock
{
AutoOsleep
{
BlueOback
{
Tilt
{
Degauss
{
()O{OOKOMENUOTV
Special
Menu
AV
Repeatedly press
CH.
Input
{
TV
ChildOlock
{
AutoOsleep
{
BlueOback
{
Tilt
{
Degauss
{
AV1
AV2
AV3
AV4
DVD
VGA
POWER
100/1250
SOUND
TV/AV
TURBO
PIP
PICTURE
TEXT
PR-
()O}OOKOMENUOTV
PR+
AV
INPUT
AV1 : VCR connected
on the set
AV2 : VCR connected
AV3 : VCR connected
on the set
AV4 : VCR connected
DVD : COMPONENT
sockets on the set
to the Euro scart socket or AV1 sockets
MENU
SWAP
PR
MUTE
to the AV2 sockets on the set
to the Euro scart socket or AV3 sockets
to the AV4 sockets on the set
connected to the COMPONENT INPUT
VOL
OK
VOL
VGA : PERSONAL COMPUTER connected to the PC INPUT
socket on the set
4.
Press the TV/AV button to return to normal TV
Alternatively
you
TV/AV button.
can
select the TV
or
AV mode
In AV mode, to return to TV mode, press the
Δ
/ Ε
viewing.
by pressing
or
PR
the
NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is
automatically switched to AV 1 mode when an AV signal is input.
But if you want to keep on watching TV mode, press the Δ / Ε or
NUMBER buttons.
Press the TV/AV button to return to AV modes.
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
I/II
STOP
Child lock
REW
SLEEP
M
ARC
P/STILL
PLAY
?
LIST
EYE
REC
FF
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
the MENU button to select the Special menu.
button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off on
the Child lock pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
Press the
Γ
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
19
Other functions
Special
Menu
CH.
Input
{
ChildOlock
{
AutoOsleep
{
BlueOback
{
Tilt
{
Degauss
{
()O{OOKOMENUOTV
AV
Auto
1.
2.
3.
4.
POWER
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Auto sleep.
Press the Γ button and then Δ / Ε button to select On or Off on
the Auto sleep pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
Blue back
100/1250
SOUND
PICTURE
PIP
1.
2.
3.
TEXT
PR-
PR+
4.
INPUT
SWAP
PR
(option)
If you select On
ground appears
TV/AV
TURBO
MENU
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
MUTE
on
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Blue back.
Press the Γ button and then Δ / Ε button to select On or Off on
the Blue back pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
Note : The blue
when there is no
background automatically
signal in AV mode.
appears
on
the
screen
Tilt
VOL
OK
The TV
another
VOL
1.
2.
3.
4.
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
SLEEP
I/II
STOP
REW
M
ARC
P/STILL
PLAY
REC
FF
left
can
or right if the TV set moves to
be used to compensate the tilt.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Tilt.
Press the Γ button and then Φ / Γ button to adjust the tilt on the
Tilt pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
Degaussing
to the super large Braun Tube in the set the magnetic field
of the earth may influence on the colour purity of picture by neighbour magnetic substance or installation direction of the set. The
stripes may appear on the screen or the colour may not be equal in
the corner. You can enjoy the programme in high colour quality by
operating the Degaussing.
Owing
?
1.
2.
3.
LIST
EYE
picture may tilt to the
position. This function
4.
press the MENU button to select the Special menu.
button and then Δ / Ε button to select Degauss.
Γ button and then Δ / Ε button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
Press the
Press the
Γ
Note : If you cannot adjust the
it again after about 4 minutes.
Sleep
screen
condition
by degaussing, try
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The dis0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
0 appears.
c.
When you switch the set off, the set releases the preset sleep time.
20
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
only the
set with PIP function can
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
Press the INPUT button to select the
picture.
picture
input
Each time this button is pressed, each
displayed as shown below.
mode for the sub
input
picture.
mode for the sub
pic-
PIP
ture is
Programme
number
VGA
Swapping
PR-
AV2
AV1
DVD
AV4
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
PR+
SWAP
INPUT
AV3
pictures
the main and sub
pictures.
picture
Press the PR +/- button. The selected programme number is disbelow the programme number of main picture.
played just
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as 1/9 size of the main picture, followed by 1/16.
POSITION
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
2/12PIP
STILL
SIZE
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
is
position
scan
This function enables you to search all the stored stations in 12 sub
pictures mode only and see your favorite station by exchanging the
main and sub pictures.
Press the 2/12 PIP button repeatedly to select 1 or 12 sub pictures.
the selected 12 sub pictures search all the stored stations
Press the 2/12 PIP button again to switch off these sub pictures.
Only
.
21
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
POWER
100/1250
TV/AV
TURBO
SOUND
PICTURE
Switch on/off
PIP
TEXT
PR-
PR+
INPUT
MENU
VOL
SWAP
PR
MUTE
OK
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page nimber indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
mode reappears.
VOL
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SIZE
SLEEP
I/II
STOP
M
ARC
P/STILL
LIST
EYE
REC
2.
lowing page.
Programming
?
PLAY
FF
or
FASTEXT mode, press the
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
4.
22
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
1.
REW
a
coloured button.
can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
PR
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
PR
1
2
3
4
5
6
7
8
9
0
lowing page.
23
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
PR
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
Stops
PR
the automatic page
change
which will
occur
if
tele-
a
text page consists of 2 or more sub pages. The number of
1
2
3
4
5
6
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
7
8
9
stop symbol is displayed
at the
top left-hand
of the
corner
and the automatic page change is inhibited.
To continue press this button again.
screen
0
?
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN,
NUMBER buttons.
change
Press this button
24
again
to exit this function.
Δ
/
Ε
or
Connection of PC
Picture
You
adjustment
adjust picture contrast, brightness,
tion, horizontal/vertical size as you prefer.
1.
2.
can
horizontal/vertical
posi-
POWER
TV/AV
Repeatedly press the TV/AV button to select the PC monitor
mode.
Press the MENU button to select the Picture menu.
SOUND
TURBO
PICTURE
PIP
TEXT
PRO
InputOOOOOOOOOOOOOOOOOOOOO{
OOO
OContrast
{
AV1
OBrightness
{
AV2
OV_Position
OV_Size
OH_Position
OH_Size
{
AV3
O()OO{OOOKOOMENUOOOTV
INPUT
{
DVD
{
√ VGA
SWAP
MENU
AV4
{
PR+
TV
PR
AV
OK
VOL
3.
4.
Press the
Press the
Δ
Γ
MUTE
VOL
button to select the desired picture item.
/
button and then Φ / Γ button to make appropriate
Ε
adjustments.
Input
PR
In PC mode, the AV modes
Contrast
This function is to
are
adjust
the
adjust
the
not available.
display
to the contrast desired.
display
to the
1
2
3
4
5
6
7
8
9
0
SSM
Brightness
This function is to
V-Position
This function is to
V-Size
This function is to
5.
6.
adjust picture
brightness
to up or down as you
desired.
prefer.
POSITION
2/12PIP
STILL
MIX
TIME
REVEAL
SLEEP
SIZE
change
the vertical
screen
size.
I/II
adjust picture
H-Size
This function is to
change
to left or
the horizontal
right
as
screen
you
prefer.
LIST
M
ARC
EYE
P/STILL
STOP
H-Position
This function is to
REC
PLAY
REW
?
FF
size.
Press the OK button to store it for the PC monitor picture.
The display Stored appears.
Repeatedly press the TV/AV button to return to normal TV viewing.
PC in socket
1.
2.
3.
4.
Connect the monitor output socket of the PERSONAL COMPUTER to the PC INPUT socket on the set.
Connect the audio cable from the PC to the AUDIO sockets on
the set.
Press the TV/AV button to select VGA.
Turn the PC on, and the PC picture appears on the screen.
The set can be operated as the PC monitor.
PC INPUT
ANT IN
AV3
IN
L L 75‰
COMPONENT
VIDEO
(L/MONO)-AUDIO-(R)
VIDEO
(L/MONO)-AUDIO-(R)
OUT
AV1
IN
IN
Y
Pb
Pr
OUT
VIDEO
AV2
(L/MONO)-AUDIO-(R)
IN
PERSONAL COMPUTER
Note : Set the resolution of PC to VGA 640x480
mode to use this set as PC monitor.
(60 Hz)
video
25
Connection of external
You
can
connect additional
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
Aerial socket
PC INPUT
ANT IN
AV3
IN
L L 75‰
COMPONENT
VIDEO
(L/MONO)-AUDIO-(R)
VIDEO
(L/MONO)-AUDIO-(R)
OUT
AV1
IN
Y
Pb
Pr
OUT
VIDEO
AV2
(L/MONO) -AUDIO-(R)
1.
IN
IN
2.
3.
VCR
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
PC INPUT
ANT IN
AV3
IN
L L 75‰
COMPONENT
VIDEO
(L/MONO)-AUDIO-(R)
VIDEO
(L/MONO)-AUDIO-(R)
OUT
AV1
IN
Y
Pb
Pr
OUT
VIDEO
AV2
(L/MONO) -AUD O-(R)
Audio/Video in/out sockets
IN
IN
1.
VCR
2.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AVbuttontoselectAV1,AV2,AV3orAV4.
3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
You
can
L/MONO-AUDIO-R
POWER
S-VIDEO VIDEO L/MONO
AV4
AUDIO
also record programmes received
out sockets.
screen.
by
the TV
on
video
tape via audio/video
R
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VCR
Euro scart socket
1.
PC INPUT
2.
ANT IN
LL 75‰
COMPONENT
IN
Y
Pb
Pr
3
OUT
AV2
AV2
VIDEO
(L/MONO)-AUDIO-(R)
IN
1
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV 1 or AV 3 mode automatically.
But if you want to keep on watching TV mode, press the Δ / Ε
or NUMBER buttons.
VCR
Otherwise press the TV/AV button
on
set to select AV 1 or AV 3. The VCR
on
the
You
Note
a.
b.
26
the remote control hand-
playback picture appears
screen.
can
also record programmes received
by the TV on
video tape.
:
i.e. the signals red, green and blue can only
be selected for the Euro scart socket 1. These signals are
transmitted, for example, by a pay TV decoder, game machine
or photo CD unit, etc.
If both Euro scart 1 and 3 sockets have been connected to the
VCRs simultaneously, only the AV 3 can be received.
Signal type RGB,
Connection of external
S-Video/Audio in sockets
When
connecting
picture quality will
1.
2.
3.
4.
equipment
(S-AV) (option)
an S-VIDEO VCR to the S-VIDEO socket, the
be further improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select AV 4 by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
L/MONO-AUDIO-R
POWER
S-V DEO VIDEO L/MONO AUDIO
AV4
R
S-VIDEO VCR
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
Component
1.
2.
3.
4.
in sockets
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i) to the COMPONENT INPUT sockets (Y PB PR) on the set.
Connect the audio cable from the COMPONENT to AUDIO IN
sockets of AV2.
Press the TV/AV button to select DVD.
Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.
Headphone
PC INPUT
ANT IN
AV3
IN
L L 75‰
COMPONENT
VIDEO
(L/MONO)-AUDIO-(R)
VIDEO
(L/MONO)-AUDIO-(R)
OUT
AV1
IN
Y
Pb
Pr
OUT
VIDEO
AV2
(L/MONO)-AUDIO-(R)
IN
IN
COMPONENT
(DVD)
socket
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphone and the TV's
speakers. To adjust the headphone volume, press the Φ / Γ button
on the §Volume pull-down menu. See the 'Sound adjustment'
section.
If you press the MUTE button, only the sound from the TV's speakers
are switched off.
CH.
SSM
{
Balance
{
AVL
{
SuperOwoofer
{
§Volume
}{O OKOI
IIIOMENUOTV
{
L/MONO-AUDIO-R
POWER
S-VIDEO VIDEO
L/MONO
AV4
AUDIO
R
D300(irI)
AV
a programme is received in dual language, you can select
language (DUAL I, DUAL II or DUAL I+II) for the sound from
the headphone regardless of that from the TV's speakers. On
the §Volume pull-down menu, press the I/II button to select
the desired language; I, II or I II.
When
a
At this time if the set is in AV mode, the I/II button selects output
sound;LR,LLorRR,inturn.
27
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
28
(VCR only)
Memo
Memo
Memo
3
Year
Guarantee
The
Express Guarantee
This
specifically covers replacement and repair of any
defective componentry or faults in manufacture for the
Guarantee Decal
period specified in the
above. However,
any goods fail to
accepts
comply with
because of any reasons beyond
no
liability where
This
applies
to work done in any
approved
specifically excludes travel time,
Service
product is outside the
Service Centre and
freight
if the
Centres normal service
this express guarantee
control.
The conditions of this
at no
Faulty components will be replaced by
cost to the owner. Similarly all work shop labour costs
needed to restore the goods to their original working
condition will be met by
during the guarantee
period.
repairs
are
area.
Express guarantee only apply if
by an approved
carried out
Service Centre in New Zealand.
This guarantee is not transferrable except
as
provided
by the Consumer Guarantee Act 1993.
Express Guarantee Service
guarantees the continued supply of spare parts for a period after the date of manufacture of not less than 5
years for electrical components and 3 years for cabinet and other cosmetic components.
If there is any conflict between this
1993, the provisions of the Act shall apply.
Model No
Serial No
P/NO
:
Express
:
:
3828VA0286Q
(MC006A,
049W TX,
486-341C)
Guarantee and the
provisions
Date Purchased
:
Purchased from
:
of the Consumer Guarantee Act
Download PDF