English OWNER'S MANUAL CLOUD MONITOR (LED LCD MONITOR) Please read the safety information carefully before using the product. CLOUD Monitor(LED LCD Monitor) Model list 23CAT42K www.lg.com 2 Table of Contents TABLE OF CONTENTS English ENG 3 ASSEMBLING AND PREPARING 20 - OTHERS 21 - Volume (Only supported in CLOUD) 3 Unpacking 4 Parts and buttons 22 TROUBLESHOOTING 5 Lifting and moving the Monitor 5 Setting Up the Monitor set 5 - Attaching the Stand Base 6 - Detaching the stand base 6 - Detaching the stand body 7 - Mounting on a table 7 - Adjusting the stand height 8 - Adjusting the angle 8 - Using the Kensington locking device 9 - Swivel stand 9 - Using the Pivot function 10 - Installing the wall mount plate 10 - Mounting on a wall 12 USING THE MONITOR SET 12 Connecting Input Signal Cable 12 - D-SUB IN connection - PC 12 - Self Image Adjustment 13 USING THE CITRIX CLOUD MONITOR SET 13 Connecting LAN/Peripherals 13 - LAN connection 13 - DVI connection 14 - Peripheral device connection 15 CUSTOMIZING SETTINGS 15 Accessing The Main Menus 16 Customizing Settings 16 - Menu Settings 17 - PICTURE 18 - COLOR 19 - DISPLAY 24 PRODUCT SPECIFICATION 25 Preset Mode 25 Power Indicator 26 PROPER POSTURE 26 Proper posture for using the monitor 27 USING CITRIX CLOUD MONITOR 27 Login screen 27 Power Button 28 Settings button: 33 Information button ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING ENG English Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. User Manual/Card Stand Base Adaptor Power Cord 15-pin D-SUB Signal Cable (option) CAUTION Only use an approved LG power adapter. yy Damage caused by other power adapters is not covered by warranty. yy NOTE Note that the components may look different from those shown here. yy Without prior notice, all information and specifications in this manual are subject to change to improve yy the performance of the product. To purchase optional accessories, visit an electronics store or online shopping site or contact the yy retail store where you purchased the product. ASSEMBLING AND PREPARING Parts and buttons English ENG UD 4 Input Connectors (See p.14 ) Power Indicator yyLED On : Power is on yyLED Off: Power is off (Power Button) MENU 92/ CLOUD AUTO INPUT EXIT Front Side Buttons 1 AUTO INPUT 1 Input Connectors (See p.12 to 14) EXIT CAUTION Use a DVI-D cable for the DVI-D OUT port. If you connect other types of cable to the port, the video yy may not be displayed correctly. 1 CAUTION This part is only used for service when a problem occurs in the product yy and it needs to be repaired. ASSEMBLING AND PREPARING Please heed the following information when moving the monitor. CAUTION yyAvoid touching the screen at all times, as this may result in damage to the screen or pixels . Setting Up the Monitor set Attaching the Stand Base 1 Place the monitor's screen face down. CAUTION To protect the screen from scratches, yy cover the surface with a soft cloth. 2 Check the position (at the front and rear) of It is recommended to move the Monitor in yy the box or packing material that the Monitor originally came in. Before moving or lifting the Monitor, yy disconnect the power cord and all cables. Hold the top and bottom of the Monitor frame yy firmly. Make sure not to hold the transparent part area. the stand body, then mount the stand base on the stand body as shown in the figure. Stand Body Stand Base When holding the Monitor, the screen should yy face away from you to prevent the screen from scratches. 3 Using a coin, turn the screw clockwise to secure the stand base. When transporting the Monitor, do not yy expose the Monitor to jolts or excessive vibration. When transporting the Monitor, keep the yy Monitor upright, never turn the Monitor on its side, or tilt towards the left or right. Stand Base ENG English Lifting and moving the Monitor 5 6 ASSEMBLING AND PREPARING English ENG Detaching the stand base Detaching the stand body 1 Place the monitor's screen face down. 1 Place the monitor's screen face down. To To protect the screen from scratches, cover the surface with a soft cloth. protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver, remove the four screws and detach the stand from the monitor. 2 Using a coin, turn the screw in the stand base counterclockwise. Detach the stand base from the stand body. Stand Body Stand Base CAUTION The components appearing in the illustrayy tions may look different from the actual product. Do not carry the monitor upside-down as this yy may cause it to fall off its stand, resulting in damage or injury. To avoid damaging the screen when lifting yy or moving the monitor, only hold the stand or the plastic cover. This avoids putting unnecessary pressure on the screen. Only remove the tape and the locking pin yy when the monitor is mounted on the stand base and is in an upright position. Otherwise, the stand body may protrude, which may lead to injury. 7 ASSEMBLING AND PREPARING Adjusting the stand height 1 Lift the monitor and place it on the table in an 1 Place the monitor mounted on the stand base Install at least 10 cm away from the wall to ensure sufficient ventilation. 2 Remove the tape attached at the bottom rear upright position. in an upright position. of the stand body, then pull out the locking pin. 10 cm 10 cm 10 cm Stand Body 10 cm Tape Locking Pin 3 The height can be adjusted up to 130.0 mm. 130.0 mm 2 Connect the adaptor to the monitor, then plug the power cord into the wall outlet. CAUTION Once the pin is removed, it is not necessary yy to re-insert it to adjust the height. 3 Press the (Power) button on the front of the monitor to turn on the monitor. CAUTION Unplug the power cord prior to moving or yy installing the monitor. There is risk of electric shock. WARNING Do not put your fingers or yy hand between the screen and the base (chassis) when adjusting the screen's height. ENG English Mounting on a table 8 ASSEMBLING AND PREPARING Adjusting the angle English ENG 1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 15° backwards for a comfortable viewing experience. 15 Rear Side -5 Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect the monitor to the table with the Kensington lock cable. Front Side WARNING To avoid injury to the fingers when adjusting yy the screen, do not hold as illustrated below. 15 15 -5 -5 NOTE Using the Kensington lock is optional. The yy accessories can be purchased at your local electronics store. Be careful not to touch or press the screen yy area when adjusting the angle of the monitor. ASSEMBLING AND PREPARING Swivel stand 3 Be careful with the cables when rotating the screen. ENG English Image shown may differ from your Monitor yy set. 1 Swivel 90 degrees and adjust the angle of the Monitor set to suit your view. Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise. 1 Lift the monitor to its highest height to utilize the Pivot function. 2 Landscape & Portrait : You can rotate the panel 90o clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand Base could crack. Head section NOTE Stand section 9 An image displayed on the monitor's screen yy does not rotate according to the screen orientation. To view a rotated image on the screen, connect the monitor to a PC and change the option in Display Settings. (See p.31 ) 10 ASSEMBLING AND PREPARING English ENG Installing the wall mount plate Mounting on a wall This monitor has a VESA compatible mount on the back. Most mounts will require an LG mounting plate. Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket. 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Place the wall mount plate on the monitor and align it with the screw holes on the monitor. 3 Using a screwdriver, tighten the four screws to fix the plate onto the monitor. 10 cm 10 cm 10 cm 10 cm Wall Mount Plate If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. NOTE The wall mount plate is sold separately. yy For more information on the installation, refer yy to the wall mount plate's installation guide. 4 VESA compatible. 5 Please use VESA standard as below. 784.8 mm (30.9 inch) and under yy * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 787.4 mm (31.0 inch) and above yy * Please use VESA standard wall mount pad and screws. ASSEMBLING AND PREPARING Model 11 23CAT42K CAUTION Unplug the power cord before moving or inyy stalling the monitor to avoid electric shocks. Installing the monitor on the ceiling or on a yy slanted wall may result in the monitor falling off, which could lead to injury. Please use a LG wall mounting bracket when using a VESA mount. For more information, contact your local retail store or a qualified installer. Applying excessive force when fastening yy screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty. Use the wall mounting bracket and screws yy that conform to the VESA standard. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty. NOTE Use the screws specified in the VESA stanyy dard. The wall mount kit includes the installation yy guide and necessary parts. The wall mounting bracket is optional. The yy accessories can be purchased at your local retail store. The length of the screw may differ for each yy wall mounting bracket. Ensure the correct length of the screw is used. yyFor more information, please refer to the user manual for the wall mounting bracket. ENG English VESA (A x B) Stand Screw Required Screw Wall Mount Plate (Optional) 100 x 100 M4 4 RW120 12 USING THE MONITOR SET USING THE MONITOR SET English ENG Self Image Adjustment Connecting Input Signal Cable Press the power button on the front to turn on the monitor. When powered on, the "Self Image Adjustment" function will run automatically (only available for analog [D-SUB input] signals). This monitor supports the *Plug and Play yy feature. *Plug and Play: A feature that allows you to add a device to your computer, without having to reconfigure anything or install any manual drivers. D-SUB IN connection - PC AUTO INPUT EXIT D-SUB IN transfers analog video signals from the PC to the monitor. Connect the monitor to the PC using the provided 15-pin D-SUB signal cable as illustrated below. 1 1 NOTE What is "Self Image Adjustment"? This funcyy tion runs when the monitor is connected for the first time and performs automatic image adjustment for each signal (only available for analog [D-SUB input] signals) to provide an optimal screen display. RGB OUT NOTE Apple Adapter yy An adapter may be needed for Apple computers. This adapter can be purchased from Apple. USING THE MONITOR SET USING THE CITRIX CLOUD MONITOR SET DVI connection 1 1 Connect the router or switch to the monitor using a LAN cable as illustrated below. 1 1 DVI-D IN MONITOR LAN Hub/Router NOTE The LAN cable is sold separately. yy The following LAN cable type can be used: yy Standard: IEEE 802.3 ETHERNET yyConnect the LAN cable and the peripheral devices to use the CITRIX cloud monitor. CAUTION Connect the input signal yy cable and tighten in the direction of the arrow. To prevent disconnection secure the cable tightly. Do not press on the screen for a prolonged yy time. This may cause image distortion. Do not display a still image on the screen yy for a prolonged time. This may cause image retention. If possible, use the screen saver. NOTE When connecting the power cord to the outyy let, use a grounded (3-hole) multi-socket or a grounded wall outlet. The monitor may flicker when turned on in an yy area of low temperature. This is normal. Sometimes red, green or blue spots may apyy pear on the screen. This is normal. ENG English To use dual monitors, connect the cloud monitor to an extended monitor using a DVI cable as illustrated below. Connecting LAN/Peripherals LAN connection 13 14 USING THE MONITOR SET Peripheral device connection NOTE English ENG Connect peripheral devices to the monitor using USB, microphone and headphone ports. Peripheral devices are sold separately. yy The USB ports on the left and bottom of the yy monitor can be used to connect the keyboard, mouse, and other USB devices. Cables with angled plugs may have clearyy ance issues, use straight plugs when possible. Left Angle Type Straight Type NOTE Bottom 1 1 1 1 yyThe cloud server settings may affect the performance of the headphones, earphones or speakers depending on the connected cloud server. The cloud server settings may affect the yy functions or speed of the specific USB storage device depending on the connected cloud server. CUSTOMIZING SETTINGS 15 CUSTOMIZING SETTINGS ENG English Accessing The Main Menus 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press to select the desired menu item. 3 To change the settings of the selected item press the buttons on the front of the monitor. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. MENU CLOUD 92/ AUTO INPUT EXIT Front Side Buttons Button MENU Description Activates the main menu. OSD Lock/Unlock Functions Locks/unlocks the OSD screen. yy To lock the OSD screen, press and hold the MENU button for several seconds. The "OSD LOCKED" message will be displayed and the screen will be locked. yy To unlock the OSD screen, press and hold the MENU button again for several seconds. The "OSD UNLOCKED" message will be displayed and the screen will be unlocked. VOL Adjusts the volume of the DHL monitor.(only works in Cloud input mode); the left arrow key CLOUD Disconnects the connection when the key is pressed for a few seconds while in Cloud mode; the right arrow key This button is used as a key for selecting the CLOUD input in the D-SUB input mode. AUTO To adjust the monitor settings, press the AUTO button on the MONITOR SETUP OSD menu (only supported for analog signal). For optimal screen display, use the following resolution. INPUT Allows selection of the input signal. yy If you connect the monitor to a computer using a D-SUB cable, select either the CLOUD or DSUB input signal. yy The initial input signal is D-SUB. EXIT Exits the OSD menu. Optimal Resolution 1920 x 1080 (Power Button) yy D-SUB Input: Power On/Off yy CLOUD Input Monitor Off: Press the power button once then the monitor will be turned off after 5 seconds. CLOUD Off: Press the power button twice then the monitor and CLOUD connection will be disabled. CLOUD On: Press the power button. Power Indicator When the monitor is in operating mode, the power indicator will turn Red (on mode). When the monitor is in power saving mode, the power indicator will blink Red. 16 CUSTOMIZING SETTINGS Customizing Settings English ENG Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "NEXT MENU" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. VOLUME Each option is explained below. MENU D-SUB CLOUD Description BRIGHTNESS ● ● To adjust the brightness of the screen CONTRAST ● ● To adjust the contrast of the screen WIDE/ORIGINAL WIDE Switch to full screen mode according to input image signal. ● ● VOLUME RESET ORIGINAL Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). ● ● Restore all factory default settings. Press the◄ , ► buttons to reset immediately. MENU > NEXT MENU PICTURE COLOR SHARPNESS GAMMA COLOR TEMP DISPLAY HORIZONTAL VERTICAL CLOCK PHASE OTHERS D-SUB CLOUD ● Adjusts the sharpness of the screen ● ● To customize the color of the screen ● To adjust the position of the screen ● To improve the clarity and stability of the screen LANGUAGE CLOUD POWER INDICATOR CLOUD: Using PC via a network. yy Description ● ● ● To customize the screen status for a user's operating environment CUSTOMIZING SETTINGS 17 PICTURE ENG English 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Enter to PICTURE by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. VOLUME MENU > NEXT MENU > PICTURE SHARPNESS Description Adjusts the sharpness of the screen. 18 CUSTOMIZING SETTINGS COLOR English ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select COLOR by pressing the ► button. 4 Enter to COLOR by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > COLOR Description GAMMA Set your own gamma value. : GAMMA 0, GAMMA 1, GAMMA 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images. COLOR TEMP CUSTOM • RED:Set your own red color levels. • GREEN: Set your own green color levels. • BLUE:Set your own blue color levels. Select the screen color. WARM: Set the screen to warm color temperature (more red). MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature (more blue). CUSTOMIZING SETTINGS 19 DISPLAY ENG English 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select DISPLAY by pressing the ► button. 4 Enter to DISPLAY by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Only available in D-SUB input mode. yy Each option is explained below. MENU > NEXT MENU > DISPLAY Description HORIZONTAL To move image left and right. VERTICAL To move image up and down. CLOCK To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. 20 CUSTOMIZING SETTINGS OTHERS English ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select OTHERS by pressing the ► button. 4 Enter to OTHERS by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > OTHERS LANGUAGE CLOUD POWER INDICATOR Description To choose the language in which the control names are displayed. Off CLOUD is disabled in D-SUB input mode. On CLOUD is enabled in D-SUB input mode. Use this function to set the power indicator on the bottom side of the monitor to ON or OFF.If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. CUSTOMIZING SETTINGS 21 Volume (Only supported in CLOUD) ENG English 1 Press the VOL button at the bottom of the monitor to display the VOL OSD menu. 2 Press the ◄ or ► button to adjust the volume. 3 Press the VOLUME button to enable or disable Mute. 4 Select EXIT to leave the OSD menu. Each option is explained below. MENU > NEXT MENU > VOLUME VOLUME Description Adjusts the volume (only available in CLOUD input mode). 22 Troubleshooting TROUBLESHOOTING English ENG Nothing is displayed on the screen Is the monitor's power cord plugged in? yy Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? yy Check the power indicator. Is the power indicator displaying as white? yy Adjust the brightness and the contrast. Is the power indicator blinking? yy If the monitor is in power saving mode, move the mouse or press any key on the keyboard to switch the display on. yy Check if the computer is turned on. yy This occurs when signals transferred from the PC (video card) are out of the horizontal or vertical frequency range of the monitor. Please see the "Product Specification" section of this manual to set the appropriate frequency. Is the "OUT OF RANGE" message displayed? Is the "CHECK SIGNAL CABLE" message is displayed? yy This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect. The "OSD LOCKED" message is displayed. Is the "OSD LOCKED" message yy The OSD lock feature is enabled to prevent undesired modification displayed when the MENU button is of the OSD settings. Press and hold the MENU button for a couple of pressed? seconds to unlock the OSD. (The "OSD UNLOCKED" message will be displayed.) The screen retains an image. Does image sticking occur even when the monitor is turned off? yy Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. yy Use a screen saver to protect the screen when using the monitor for a prolonged period of time. NOTE Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per yy second like a fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency or refresh rate and is represented by Hz. Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle. yy The number of horizontal lines displayed in one second can be calculated by dividing one by the horizontal cycle. This is called horizontal frequency and is represented by kHz. Troubleshooting 23 The image is displayed abnormally. Pressing the AUTO button will automatically optimize the screen to the current display mode. Does the screen exhibit vertical lines? Pressing the AUTO button will automatically optimize the screen to the current display mode. Does the screen display horizontal Pressing the AUTO button will automatically optimize the screen to the current frequencies, or does the text appear display mode. blurred? NOTE Check if the video card's resolution or frequency is within the range allowed by the monitor and set to yy the recommended (optimal) resolution in Control Panel > Display > Settings. Failing to set the video card to the recommended (optimal) resolution may result in blurred text, a yy dimmed screen, a truncated display area or misalignment of the display. The configuration procedure may differ depending on your computer and/or operating system. Also, yy some video cards may not support certain resolutions. If this is the case, contact the computer or video card manufacturer for assistance. The AUTO option is only available for D-SUB (analog) signals. yy The display color is abnormal. Does the display color appear discolored (16 color)? yy Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. Does the display color appear unstable or in monochrome? yy Check if the signal cable is connected properly. Re-connect the cable or re-insert the PC's video card. Are there spots on the screen? yy When using the monitor, pixilated spots (red, green, blue, white or black) may appear on the screen. This is normal for the LCD screen. It is not an error nor is it related to the monitor's performance. ENG English Does the display area appear uncentered? 24 Specifications PRODUCT SPECIFICATION English ENG LCD Screen Type Resolution Pixel Pitch Maximum Resolution 58.42 cm (23 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 58.42 cm 0.2652 mm x 0.2652 mm 1920 x 1080 @ 60 Hz Recommended Resolution DVI-D output Horizontal Frequency Vertical Frequency 1920 x 1080 @ 60 Hz 1920 x 1200 @ 60 Hz 30 kHz to 68 kHz 57 Hz to 63 Hz Synchronization 15-pin D-SUB (Analog) Power Separate Sync Video Signal Input Connector Power Dimension/ Weight Weight (Without Packaging) AC/DC Adapter Stand Angle Adjustment Environment Condition 19 V 2.3 A Power Consumption(Typ.) On Mode: 24 W(D-sub) / 31 W(CLOUD) (D-sub/CLOUD) Power Saving Mode ≤ 0.5 W (CLOUD mode: 8.5 W) Off Mode ≤ 0.5 W Monitor Size (Width x Height x Depth) With Stand 544.2 mm x 386.5 mm x 130.6 mm Without Stand 544.2 mm x 332.3 mm x 47 mm 5.54 kg Type PA-1650-68, manufactured by LITE-ON TECHNOLOGY CORPORATION. OUTPUT: 19 V 3.42 A Forwards/Backwards: -5° to 15° (Monitor) Operating Condition Temperature: 10°C to 35°C; Humidity: 10% to 80% Storing Condition Temperature: -20°C to 60°C; Humidity: 5% to 90% The specifications are subject to change without notice. Product Specification 25 Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1280 x 1024 63.981 60.02 +/+ 1680 x 1050 65.290 59.954 -/+ 1920 x 1080 67.5 60 +/+ Power Indicator Mode LED Color On Mode Red Power Saving Blinking Red Off Mode Off Remark Recommended Mode ENG English Display Modes (Resolution) 26 Proper Posture PROPER POSTURE English ENG Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. Using the monitor for a prolonged period of time can cause eye fatigue. Take a 10-minute break every yy hour. The stand is designed to best support the monitor when the optimal conditions are selected. yy Adjust the angle of the monitor from -5° to 15° to obtain the best view of the screen. You should be looking slightly down at the screen. Adjust the angle from -5° to 15° so that there is no reflection or glare from the screen. Place your hands gently on the keyboard, keeping your arms bent at the elbows and extended horizontally in front of you. Using CITRIX CLOUD MONITOR 27 USING CITRIX CLOUD MONITOR Power Button This screen is displayed when power is turned on. Click the Power button to turn the system off or restart it in the login screen. Login Window Enter a user name, password and domain to access the VDI server. Power Off Menu Select the Power Off menu and then press the OK button in the Shutdown pop-up to terminate the system. Network status: If a network is connected, yy the text Connected appears with a green circle button. If not, the text Disconnected appears with a red circle button. When you click the Network status link, the network setting screen is displayed. If a network is being connected, the message 'Connecting...' is displayed with [Figure: Red]. Remember me: If you select this button, the yy system saves your user name and domain that you used to log in for future use. Log in: When you click this button, the sysyy tem starts to access a server. NOTE yyThe maximum number of characters allowed for a user name, password and domain is 80. ENG English Login screen 28 Using CITRIX CLOUD MONITOR Restart Menu English ENG Select the Restart menu and click the OK button in the Restart pop-up to restart the system. Settings button: You can set the network, server or language for using a network monitor. Language Set a language to use on the network monitor home screen. After setting the language, click the 'OK' button. The default is English. Network Set a wired/wireless network. (Support for the wireless connection is planned to begin in 2013.) Using CITRIX CLOUD MONITOR Wired connection setting Wireless setting (support planned to begin in 2013) The AP list for wireless network connection is yy displayed. Click the Refresh button to update the list of accessible APs. Double click an AP or click the Connect butyy ton after selecting an AP to access the AP. When the connection is established, the AP is marked as connected in the list. When you select a connected AP and then yy click the right mouse button, the Disconnect and Set-Up buttons are displayed. If you select an AP which is not connected and then click the right mouse button, the Connect button is displayed. ENG English Ethernet speed setting: Set the network yy speed. You can select Auto-Detect, 10Mbps, 100Mbps or 1000Mbps. DHCP setting: Set the DHCP mode. If it is yy set to On, an IP is automatically fetched from a DHCP server and used. Static connection setting: If DHCP is set to yy Off, the input window is displayed for detailed setting. Enter the IP Address, Subnet Mask, Default Gateway and DNS Server fields and then click the OK button. 29 30 Using CITRIX CLOUD MONITOR Server English ENG Set Citrix VDI server and LGDMS server address. LGDMS is a cloud monitor management software provided by LG Electronics. VDI server setting Enter a VDI server address to access. yy Connect Automatically: This option connects yy an IP automatically if it is disconnected. DHCP setting: Set the DHCP mode. If it is yy set to On, an IP is automatically fetched from a DHCP server and used. Static connection setting: If DHCP is set to yy Off, the input window is displayed for detailed setting. Enter the IP Address, Subnet Mask, Default Gateway and DNS Server fields and then click the OK button. Activity setting: Set to turn on/off a wireless yy network. Enable: Wireless network is used. Disable: Wireless network is not used. Using CITRIX CLOUD MONITOR LGDMS setting Screen Output Setting Primary display setting Resolution: Select the resolution of a moniyy tor. The network monitor supports 5 resolutions including Auto, 1920x1080, 1680x1050, 1280,x1024 and 1024x769. When it is set to Auto, the monitor is automatically adjusted to the optimal resolution. Rotation: Set the angle of a LCD screen to yy normal, 90 degree counter-clockwise or 90 degree clockwise. ENG English Enter the address of LGDMS server to conyy nect to. 31 32 Using CITRIX CLOUD MONITOR Secondary display setting English ENG Resolution: Select the resolution of a moniyy tor. Among the resolutions supported in the DVI monitor, 1024x768 or higher resolutions and Auto menu are displayed. When it is set to Auto, the monitor is automatically adjusted to the optimal resolution. Rotation: Set the angle of a LCD screen to yy normal, 90 degree counter-clockwise or 90 degree clockwise. Dual Monitor: You can specify the extension yy mode. - Span Mode allows to extend display. - Mirror Mode allows to copy display. In Mirror Mode, the resolution and rotation menus are disabled. When you click the OK button, the system is restarted and the selected settings are applied. Volume You can adjust the system volume and mike volume. If you select the Mute checkbox, the volume control bar is disabled. NOTE yyThe settings are enabled only when the DVI-D monitor is connected. Mouse You can set the mouse speed by dragging the "Cursor Speed" scroll bar. Select either "Right Handed" or "Left Handed" in Button Type to customize the mouse buttons. Using CITRIX CLOUD MONITOR Factory reset Information button General Tab Display the hardware and software information of a network monitor. Hardware Information: Network monitor modyy el name and asset number. The asset number can be set in LGMC Software information: Firmware version, softyy ware file name and publisher information Wake on LAN: Status of Wake on LAN yy NOTE yyWake on LAN can only be set in the LGMC. yyLGMC is a cloud management software application provided by LG Electronics. ENG English The system is reset to factory defaults and rebooted. All user settings are removed. 33 34 Using CITRIX CLOUD MONITOR Network Tab English ENG Display network related information. Network Information: VDI/LGDMS server IP yy address information Wired Connection: IP address and MAC adyy dress of a wired network Wireless Connection: IP address and MAC yy address of a wireless network Ping Tab By pinging, you check the network connection to a specific IP or host from a local client and also local network status. NOTE yyOnly IP or host name can be entered. The parameters of ping can not be used. Declaration of Conformity Trade Name: LG Model : 23CAT42KL Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com . In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to firstname.lastname@example.org. This offer is valid for three (3) years from the date on which you purchased the product. ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.