LG | 22SM3B | LG 22SM3B-B Owner’s Manual

OWNER’S MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating the your set and retain it
for future reference.
22SM3B
www.lg.com
2
ENGLISH
TABLE OF CONTENTS
3
SAFETY PRECAUTIONS
3
4
Precautions in installing the product
Precautions to the AC adapter and
electrical power
Precautions in moving the product
Precautions in using the product
Mounting on a wall
5
5
5
6LICENSES
7
ASSEMBLY AND PREPARATION
7
8
8
9
10
10
Optional Accessories
Parts and Buttons
Portrait Layout
Attaching and removing the LG Logo
Bracket
Installing the Wall Mount Plate
Installing on the Wall
12
REMOTE CONTROL
14
MAKING CONNECTIONS
14
14
15
Connecting to a PC
External Device Connection
Using the Input List
16TROUBLESHOOTING
19
PRODUCT SPECIFICATIONS
3
Please read these safety precautions carefully before using the
product.
WARNING
If you ignore the warning message, you may be seriously injured
or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or
the product may be damaged.
WARNING
•• Indoor Use Only.
Precautions in installing the product
WARNING
•• Keep away from heat sources like electrical heaters.
►►Electrical shock, fire, malfunction or deformation may occur.
•• Keep the packing anti-moisture material or vinyl packing out of
the reach of children.
►►Anti-moisture material is harmful if swallowed. If swallowed by
mistake, force the patient to vomit and visit the nearest hospital.
Additionally, vinyl packing can cause suffocation. Keep it out of the
reach of children.
•• Do not put heavy objects on the product or sit upon it.
►►If the product collapses or is dropped, you may be injured. Children
must pay particular attention.
•• Do not leave the power or signal cable unattended on the
pathway.
►►The passerby can falter, which can cause electrical shock, fire, product
breakdown or injury.
•• Install the product in a neat and dry place.
►►Dust or moisture can cause electrical shock, fire or product damage.
•• If you can smell smoke or other odors or hear a strange sound
unplug the power cord and contact the service center.
►►If you continue to use without taking proper measures, electrical
shock or fire can occur.
•• If you dropped the product or the case is broken, turn off the
product and unplug the power cord.
►►If you continue to use without taking proper measures, electrical
shock or fire can occur. Contact the service center.
•• Do not drop an object on or apply impact to the product. Do not
throw any toys or objects on the product screen.
►►It can cause injury to human, problem to product and damage the
display.
•• Do not let the product fall or drop when connecting it with an
external device.
►►This may cause injury and/or damage to the product.
•• When connecting it with a game device, keep a distance of four
times as long as the diagonal measurement of the screen from
the device.
►►If the product falls because of the short cable, this may cause injury
and/or damage to the product.
•• Leaving a fixed image on the screen for a long time may cause
damage to the screen and cause image burn-in. To use the product
for a long period of time, use a screen saver on the PC or utilize
the residual image prevention function on the product, and when
the product is not used, turn off the power. Burn-in and related
problems are not covered by the warranty on this product.
•• Do NOT install this product on a wall where there is high risk of
exposure to oil fumes or mist.
►►This may damage product and cause is to fail.
CAUTION
•• Make sure the product ventilation hole is not blocked. Install the
product in a suitably wide place (more than 100 mm from the
wall)
►►If you install the product too close to the wall, it may be deformed or
fire can break out due to internal heat.
•• Do not block the ventilation hole of the product by a tablecloth
or curtain.
►►The product can be deformed or fire can break out due to overheating
inside the product.
•• Install the product on a flat and stable place that has no risk of
dropping the product.
►►If the product is dropped, you may be injured or the product may
be broken.
•• Install the product where no EMI occurs.
•• Keep the product away from direct sunlight.
►►The product can be damaged.
•• If you install the product in a place that does not meet the
recommended conditions, this may cause serious damage to the
product’s picture quality, life cycle and appearance. Please check
with LG or a qualified installer before installing. This caution
applies to a place where there is an abundance of fine dust or oil
mist, chemical substances are used, the temperature is very high
or low, the humidity is very high, or the product is likely to remain
turned on for a long period of time (airport and train station),
failure to do so will invalidate the warranty.
•• Do not install the product in an area with poor ventilation (e.g.on
a bookshelf, in a closet) or outside and avoid placing on cushions
or carpets.
•• In addition, do not install it where there are heating objects such
as lighting equipment.i
ENGLISH
Safety precautions
4
ENGLISH
Precautions to the AC adapter and
electrical power
WARNING
•• If water or any foreign substance goes inside the product (TV,
monitor, power cord, or AC adapter), disconnect the power cord
immediately and contact the service center.
►►Otherwise, this may cause a fire or electric shock due to damage to
the product.
•• Do not touch the power plug or AC adapter with wet hands. If the
pins of the plug are wet or dusty, wipe and dry them before use.
►►Otherwise, this may cause a fire or electric shock.
•• Make sure to completely insert the power cord into the AC adapter.
►►If loosely connected, the poor connection may cause a fire or electric
shock.
•• Be sure to use power cords and AC adapters provided or approved
by LG Electronics, Inc.
►►The use of non-approved products may cause a fire or electric shock.
•• When unplugging the power cord, always pull it by the plug. Do
not bend the power cord with excessive force.
►►The power line can be damaged, which may cause electric shock
or fire.
•• Be careful not to step or place heavy objects (electronic appliances,
clothing, etc.) on the power cord or AC adapter. Be careful not to
damage the power cord or AC adapter with sharp objects.
►►Damaged power cords may cause a fire or electric shock.
•• Never disassemble, repair or modify the power cord or AC adapter.
►►This may cause a fire or electric shock.
•• Make sure to connect the power cable to the grounded current.
►►You may be electrocuted or injured.
•• Use the rated voltage only.
►►The product can be damaged, or you may be electrocuted.
•• In the presence of thunder and lightning, never touch the power
cord and signal cable because it can be very dangerous.
►►It can cause electric shock.
•• Do not connect several extension cords, electrical appliances
or electrical heaters to a single outlet. Use a power bar with a
grounding terminal designed for exclusive use with the computer.
►►A fire can break out due to overheating.
•• Do not touch the power plug with wet hands. Additionally, if
the cord pin is wet or covered with dust, dry the power plug
completely or wipe dust off.
►►You may be electrocuted due to excess moisture.
•• If you don't intend to use the product for a long time, unplug the
power cable from the product.
►►Covering dust can cause a fire, or insulation deterioration can cause
electric leakage, electric shock or fire.
•• Fix the power cable completely.
►►If the power cable is not fixed completely, a fire can break out.
•• Do not insert a conductor (like a metal chopstick) into one end
of the power cable while the other end is connected to the input
terminal on the wall. Additionally, do not touch the power cable
right after plugging into the wall input terminal.
►►You may be electrocuted.
•• The appliance coupler is used as the disconnect device.
•• Please make sure the device is installed near the wall outlet to
which it is connected and that the outlet is easily accessible.
•• As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if the unit is turned
off.
CAUTION
•• Be sure to keep the outlet, AC adapter, and pins of the power plug
clean from dust and etc.
►►This may cause a fire.
•• Do not unplug the power cord while the product is in use.
►►Electrical shock can damage the product.
•• Use only the power cord supplied with the unit. If you use another
power cord, make sure that it is certified by the applicable national
standards when not provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest
authorized repair service provider for a replacement.
5
WARNING
•• Make sure to turn off the product.
►►You may be electrocuted or the product can be damaged.
•• Make sure to remove all cables before moving the product.
►►You may be electrocuted or the product can be damaged.
•• Make sure the panel faces forward and hold it with both hands to
move. If you drop the product, the damaged product can cause
electric shock or fire. Contact an authorized the service center for
repair.
•• Make sure the product is turned off, unplugged and all cables
have been removed. It may take 2 or more people to carry larger
apparatus. Do not press against or put stress on the front panel of
the apparatus.
CAUTION
•• Do not shock the product when moving it.
•• Set the appropriate resolution and clock by referring to the User’s
Guide.
►►Your vision can be impaired.
•• Use authorized detergent only when cleaning the product. (Do not
use benzene, thinner or alcohol.)
►►Product can be deformed.
•• Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the
apparatus (e.g. on shelves above the unit).
•• Batteries should not be exposed to excessive heat. For example,
keep away from direct sunlight, open fireplace and electric
heaters.
•• Do NOT place non-rechargeable batteries in charging device.
•• Using headsets (earphones) for a long time or listening loudly can
cause damage to your hearing.
•• Spray water onto a soft cloth 2 to 4 times, and use it to clean the
front frame; wipe in one direction only. Too much moisture may
cause staining.
►►You may be electrocuted or the product can be damaged.
•• Do not dispose the product-packing box. Use it when you move.
Precautions in using the product
WARNING
•• Do not disassemble, repair or modify the product at your own
discretion.
►►Fire or electric shock accident can occur.
►►Contact the service center for check, calibration or repair.
•• When the display is to be left unattended for an extended period
of time, unplug it from the wall outlet.
•• Keep the product away from water.
►►Fire or electric shock accident can occur.
•• Do not shock or scratch the front and sides of the screen with
metallic objects.
►►Otherwise, it may cause damage to the screen.
•• Avoid high temperatures and humidity.
CAUTION
•• Do not put or store inflammable substances near the product.
►►There is a danger of explosion or fire due to careless handling of the
inflammable substances.
•• When cleaning the product, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not clean with a
wet cloth or spray water or other liquids directly onto the product.
An electric shock may occur. (Do not use chemicals such as
benzene, paint thinners or alcohol)
•• Take a rest from time to time to protect your vision.
•• Keep the product clean at all times.
•• Take a comfortable and natural position when working with a
product to relax the muscles.
•• Take a regular break when working with a product for a long time.
•• Do not press strongly upon the panel with a hand or sharp object
such as nail, pencil or pen, or make a scratch on it.
•• Keep the proper distance from the product.
►►Your vision may be impaired if you look at the product too closely.
•• Do not use products using high voltage around the Monitor.
(e.g., a bug zapper)
►►Monitor may have malfunction as its electrical shock.
Mounting on a wall
•• Do NOT install this product by yourself as you may injure yourself
or cause damage to product. Please contact Service personnel
authorised by Manufacturer.
ENGLISH
Precautions in moving the product
6
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX®
video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your
registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are
used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others available at
[www.divx.com/patents]
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS
Licensing Limited. DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol
together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
NOTE
•• The warranty will not cover any damage caused by using the product in an excessively dusty environment.
7
CAUTION
•• Always use genuine components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
•• The accessories provided with your product may vary depending on the model or region.
•• Product specifications or contents in this manual may be changed without prior notice due to upgrade of
product functions.
•• SuperSign Software & Manual
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for
your model.
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
KT-SP0
Pixel sensor kit
NOTE
•• Optional accessories are available for some models. If necessary, please purchase them separately.
•• Pixel sensor is sold separately. You can obtain additional accessories from your local retail store.
ENGLISH
ASSEMBLY AND PREPARATION
8
ENGLISH
Parts and Buttons
- The image may be different according to the
model.
Portrait Layout
To install in portrait mode, rotate the set
counterclockwise 90 degrees when looking at from
the front.
Using Kensington Lock
Buttons
yy
yy
: Changes the input source.
/I: Turns the power on or off.
(This is not available for all models.)
The Kensington security system connector is
located at the back of the monitor. For more
information on installation and use of this system,
refer to the manual provided with the Kensington
security system or visit http://www.kensington.
com.
Connect the Kensington security system cable
between the monitor and a table.
NOTE
••The Kensington security system is optional. You
can obtain additional accessories from most
electronics retail stores.
9
- For certain models only.
- The image may be different according to the model.
Removing the LG Logo
1Lay a clean cloth on the floor, and then put the
monitor on it with the screen face down. Using
a screwdriver, remove the screw that secures
the LG Logo Bracket to the bottom rear of the
monitor.
Attaching the LG Logo on the right side
1Lay a clean cloth on the floor, and then put the
monitor on it with the screen face down. Using
a screwdriver, remove the screw that secures
the LG Logo Bracket to the bottom rear of the
monitor.
LG Logo Bracket
2
After removing the screw, remove the LG Logo.
When re-attaching the LG Logo, repeat the
process in reverse order.
2
After removing the screw, remove the LG
Logo. Attach the LG Logo Bracket with a screw,
aligning it with the hole on the right side.
ENGLISH
Attaching and removing the LG Logo Bracket
10
ENGLISH
Installing the Wall Mount Plate
Installing on the Wall
This monitor meets the specifications for the wall
mount plate or other compatible devices.
Install the monitor at least 100 mm away from the
wall and leave about 100 mm of space at each
side of the monitor to ensure sufficient ventilation.
Detailed installation instructions can be obtained
from your local retail store. Alternatively, please
refer to the manual for how to install and set up a
tilting wall mounting bracket.
1
Place the screen face down. To protect the
screen from scratches, cover the surface with a
soft cloth.
2
Place the wall mount plate onto the monitor
and align it with the screw holes.
3
Tighten the four screws to fix the plate to the
monitor using a screwdriver.
100 mm
NOTE
yy The wall mount plate is sold separately.
yy For more information on installation, refer to
the wall mount plate's installation guide.
yy Be careful not to apply too much force while
mounting the wall mount plate as it may
cause damage to the screen.
100 mm
100 mm
100 mm
100 mm
To install the monitor to a wall, attach a wall
mounting bracket (optional) to the back of the
monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1If you use screws longer than the standard
length, it may damage the inside of the
product.
2A non-VESA standard screw may damage
the product and cause the monitor to fall.
LG Electronics is not liable for any accidents
relating to the use of non-standard screws.
Wall Mount (A x B)
Screw specifications
Number of screws
required
Wall Mount Plate
(Optional)
100 x 100
M4 x L10
4
RW120
11
yy Wall Mount (A x B)
B
NOTE
yy Use the screws specified by VESA standards.
yy The wall mount kit includes the installation guide
and all necessary parts.
yy The wall mounting bracket is optional. You can
obtain optional accessories from your local dealer.
yy The length of the screw may differ for each wall
mounting bracket. Be sure to use the proper
length.
yy For more information, please refer to the user
manual for the wall mounting bracket.
yy Unplug the power cord before moving or installing the monitor to avoid electric shock.
yy Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling off,
which could lead to injury. Use an authorized LG
wall mount and contact the local dealer or qualified personnel.
yy Applying excessive force when tightening
screws may cause damage to the monitor. Damage caused in this way will not be covered by
the product warranty.
yy Use the wall mounting bracket and screws that
conform to VESA standards. Damage caused by
the use or misuse of inappropriate components
will not be covered by the product warranty.
yy When measured from the back of the monitor,
the length of each installed screw must be
8 mm or less.
yy To prevent injury, this apparatus must be
securely attached to the wall in accordance with
the installation instructions. (This pertains only
to Australia and New Zealand.)
Wall Mount Plate
Back of the Monitor
Wall Mount Plate
Back of the Monitor
Screw Dimensions
: M4 x L10
Max 8 mm
ENGLISH
A
CAUTION
12
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual
carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
labels inside the compartment, and close the battery cover.
and
terminals to the
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual
accessories.
CAUTION
••Do not mix old and new batteries, as this may
damage the remote control.
••Be sure to point the remote control toward the
remote control sensor on the monitor.
••Use the remote control within 3 m from the
front.
(POWER) Turns the monitor on or off.
MONITOR ON Turns the monitor on.
MONITOR OFF Turns the monitor off.
ENERGY SAVING A
djusts the brightness of the picture to reduce energy
consumption.
INPUT Selects the input mode.
3D Used for viewing 3D videos. (This model does not support this.)
1/a/A Toggles between numerical and alphabetical.
(Depending upon the model, this feature may not be supported.)
Number and Alphabet buttons Enters numerical or alphabetical characters depending upon the setting.
(Depending upon the model, this feature may not be supported.)
CLEAR Deletes the entered numerical or alphabetical character.
(Depending upon the model, this feature may not be supported.)
Volume Up/Down Button Adjusts the volume.
ARC Selects the Aspect Ratio mode.
AUTO Automatically adjusts picture position and minimizes image
instability (available for RGB input only).(Depending upon the
model, this feature may not be supported.)
MUTE Mutes all sounds.
BRIGHTNESS Adjusts the brightness of the display. PAGE function is not
supported in this model. (Depending upon the model, this
feature may not be supported.)
13
SETTINGS A
ccesses the main menus or saves your input and exit menus.
S.MENU S uperSign menu key (Depending upon the model, this feature
may not be supported.)
Navigation Buttons Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK A
llows you to move back one step in the user interaction function.
EXIT Quit all OSD tasks and applications.
A
llows you to control various multimedia devices to enjoy
multimedia simply by using the remote control through the
SimpLink menu. (Depending upon the model, this feature
may not be supported.)
TILE Selects the TILE Mode.
PICTURE ID ON/OFF When the Picture ID number matches the Set ID
number, you can control whichever monitor you
want in multi-display format.
USB Menu Control Buttons Controls media playback.
ENGLISH
PSM Selects the Picture Mode.
HOME Activates the Launcher.
W.BAL Enters the White Balance menu.
14
ENGLISH
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the external
device you want to connect. For more information about external device connections, see the user manual
provided with each device.
Connecting to a PC
Some of the cables are not provided.
This monitor supports the Plug and Play* feature.
* Plug and Play: a feature that enables a PC to recognize devices attached by the user without device
configuration or user intervention when powering up.
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
Some of the cables are not provided. For the best picture and sound quality, connecting external devices to
your monitor using HDMI cables is recommended.
NOTE
••For the best image quality, using the monitor with HDMI connection is recommended.
••To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a
D-sub 15-pin cable and HDMI cable.
••If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
••Sometimes red, green, or blue spots may appear on the screen. This is normal.
••Use a High Speed HDMI®/TM cable.
••Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
••Recommended HDMI Cable Types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
••If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to
manually change the default audio output to HDMI.
••If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
••You may experience compatibility issues if you use HDMI-PC mode.
••Make sure the power cable is disconnected.
••If you connect a gaming device to the monitor, use the cable provided with the gaming device.
••It is recommended to use the speakers that are provided as optional accessories.
••High Speed HDMI®/TM cables transmit a HD signal up to 1080p and higher.
CAUTION
••Connect the signal input cable and tighten it by turning the screws clockwise.
••Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on
the screen.
••Avoid displaying static images on the screen for a long period of time to prevent image burn. Use a
screensaver if possible.
••A wireless communication device near your monitor can affect the image.
15
yy RGB -> HDMI
ENGLISH
Using the Input List
16
ENGLISH
TROUBLESHOOTING
No image is displayed
Problem
Action
Is the product power cord connected?
yy Check if the power cord is correctly plugged into the power
outlet.
yy The signal from the PC (video card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency
range by referring to the Specifications in this manual.
* Maximum resolution: 1920 x 1080 (60 Hz)
yy The signal cable between PC and product is not connected.
Check the signal cable.
yy Press the INPUT menu in the remote Control to check the input
signal.
oes the Out of range message
D
appear?
oes the Check signal cable message
D
appear?
The Unknown Product message appears when the product is connected.
Problem
Did you install the driver?
Action
yy Check if the Plug and Play function is supported by referring to
the video card user manual.
The screen image looks abnormal.
Problem
Is the screen position wrong?
The screen is displayed abnormally.
Action
yy Check if the video card resolution and frequency are supported
by the product. If the frequency is out of range, set to the
recommended resolution in the Control Panel Display Setting
menu.
yy The proper input signal is not connected to the signal port.
Connect the signal cable that matches with the source input
signal.
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Action
yy If you use a fixed image for a long time, the pixels may be
damaged. Use the screen-saver function.
yy When a dark image is displayed on the screen after an image
with high contrast (black and white or gray), this may cause
image sticking. This is normal for LCD screen products.
17
Problem
No sound?
Sound is too dull.
Sound is too low.
Action
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Select the appropriate equalizer sound.
yy Adjust the volume.
Screen color is abnormal.
Problem
Action
Screen has poor color resolution (16
colors).
yy Set the number of colors to more than 24 bits (true color). Select
Control Panel - Display - Settings - Color Table menu in Windows.
S creen color is unstable or
mono-colored.
yy Check the connection status of the signal cable. Or, re-insert the
PC video card.
Do black spots appear on the screen?
yy Several pixels (red, green, white, or black color) may appear
on the screen, which can be attributable to the unique
characteristics of the LCD panel. This is not a malfunction of the
LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Action
yy Is the Timers set?
yy Check the power control settings. Power interrupted.
ENGLISH
The audio function does not work.
18
ENGLISH
CAUTION
••Displaying a still image for a long time may cause damage to the screen, resulting in a ghost image. Damage
resulting from the reason above is not covered by the product warranty.
••Image sticking does not occur when using constantly changing images but may occur when using a fixed
image for an extended period of time. Therefore, it is recommended that you use the instructions below
to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that
you change the screen at least once every 12 hours at the very minimum; if done more frequently, the
prevention of image sticking is more effective.
Recommended operating conditions
1 Change the background and the character
2 Change the image using the same time
colors using the same time interval.
ID: UPM 123
PW: ****
interval.
ID: UPM 123
PW: ****
When changing colors, using complementary
colors helps to prevent image sticking.
Make sure that the characters or images before
changing the image remain in the same location
after changing the image.
What is image sticking?
Glass
BM
CF
BM
CF
BM
CF
OC
PI
LC
PI
TFT Layers
Glass
ITO or MoTi Pixel Layer
I D : UPM123
PW : ******
I D : UPM123
PW : ******
CF
When the LCD panel displays a static image for an
extended period of time, it can cause a voltage
difference between the electrodes that operate
the liquid crystals. When the voltage difference
between the electrodes builds up over time, liquid
crystals have a tendency to remain aligned in
one direction. During this process, a previously
displayed image remains visible. This phenomenon
is referred to as image sticking.
19
The product specifications below may be changed without prior notice due to upgrade of product functions.
LCD screen
Screen type
Thin Film Transistor (TFT)
Video signal
Liquid Crystal Display (LCD) Screen
Maximum resolution 1920 x 1080 @ 60 Hz
- This may not be supported on some OS or graphic card types.
1920 x 1080 @ 60 Hz
Recommended
resolution
- This may not be supported on some OS or graphic card types.
RGB/HDMI : 30 kHz to 83 kHz
Horizontal
frequency
Vertical frequency
RGB: 50 Hz to 75 Hz
HDMI: 56 Hz to 60 Hz
Separate Sync, Digital
Synchronization
Input/output ports
Embedded battery
Environmental
Conditions
RS-232C IN, AUDIO IN, PIXEL SENSOR, LAN, RGB IN, HDMI IN,
USB IN
Applied
0 °C to 40 °C
Operating
Temperature
Operating Humidity
Storage
Temperature
10 % to 80 %
-20 °C to 60 °C
Storage Humidity
5 % to 95 %
refers to alternating current (AC), and
refers to direct current (DC).
ENGLISH
PRODUCT SPECIFICATIONS
20
ENGLISH
22SM3B
LCD screen
Pixel pitch
0.08265 mm (H) x 0.24795 mm (V)
Power
Rated power
AC 100-240 V~ 50/60 Hz 0.9 A
Power consumption
On Mode: 35 W Typ.
Sleep Mode (RGB, HDMI): ≤ 1.0 W
Dimensions (Width
x Height x Depth) /
Weight
Off Mode: ≤ 0.5 W
510.3 mm x 302.1 mm x 53.8 mm / 3.6 kg
Head
Wireless module(LGSBW41)Specifications
Wireless LAN (IEEE 802.11a/b/g/n)
Frequency range (MHz)
Output power (Max.)
2400 to 2483.5
16 dBm
5150 to 5250
16 dBm
5725 to 5850 (Not for EU)
11.5 dBm
Bluetooth
Frequency range (MHz)
Output power (Max.)
2400 to 2483.5
10 dBm
•• As band channels can vary per country, the user cannot change or adjust the operating frequency. This
product is configured for the regional frequency table.
•• For consideration of the user, this device should be installed and operated with a minimum distance of
20 cm between the device and the body.
(Only HongKong)
Wireless module(LGSBW41)Specifications
Wireless LAN
Standard
IEEE 802.11a/b/g/n
Bluetooth
Standard
Bluetooth
2400 to 2483.5
Frequency range (MHz) 5150 to 5250
Frequency range (MHz)
2400 to 2483.5
5725 to 5850
802.11a: 13 dBm
802.11b: 15 dBm
Output power (Max.)
802.11g: 14 dBm
Output power (Max.)
10 dBm or Lower
802.11n - 2.4GHz: 16 dBm
802.11n - 5GHz: 16 dBm
•• As band channels can vary per country, the user cannot change or adjust the operating frequency. This
product is configured for the regional frequency table.
•• For consideration of the user, this device should be installed and operated with a minimum distance of
20 cm between the device and the body.
21
HDMI (DTV) Support Mode
Resolution
Horizontal
Vertical frequency
frequency (kHz) (Hz)
Resolution
Horizontal
Vertical frequency
frequency (kHz) (Hz)
720 x 400
31.468
70.8
480/60p
31.5
60
640 x 480
31.469
59.94
576/50p
31.25
50
800 x 600
37.879
60.317
720/50p
37.5
50
1024 x 768
48.363
60.0
720/60p
45
60
1280 x 720
44.772
59.855
1080/50i
28.1
50
1280 x 960
60
60
1080/60i
33.75
60
1280 x 1024
63.981
60.02
1080/50p
56.25
50
1680 x 1050
65.29
59.954
1080/60p
67.5
60
1920 x 1080
67.5
60
HDMI Support Mode
NOTE
Resolution
Horizontal
Vertical frequency
frequency (kHz) (Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.29
59.954
1920 x 1080
67.5
60
••PC resolutions available for the Input Label
option in RGB / HDMI input modes: 640 x 480/
60 Hz, 1280 x 720/60 Hz, 1920 x 1080/60 Hz;
480p, 720p, and 1080p DTV resolutions.
••Vertical frequency: The product display
functions by the screen image changing dozens
of times every second like a fluorescent lamp.
The vertical frequency or refresh rate is the
number of image displays per second. The unit
is Hz.
••Horizontal frequency: The horizontal interval
is the time taken to display one horizontal line.
When 1 is divided by the horizontal interval,
the number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
ENGLISH
RGB (PC) Support Mode
Make sure to read the Safety Precautions
before using the product.
The model and serial numbers of the SET are
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
Temporary noise is normal when powering ON
or OFF this device.
Download PDF