ENGLISH OWNER’S MANUAL IPS LED MONITOR Please read this manual carefully before operating your set and retain it for future reference. IPS LED MONITOR MODEL 24EB23PM www.lg.com 2 TABLE OF CONTENTS Contents ENGLISH ENG 3 ASSEMBLING AND PREPARING 25TROUBLESHOOTING 3 Unpacking 4 Parts and buttons 27SPECIFICATIONS 5 Setting up the Monitor set 27 24EB23PM 5 - Attaching the Stand Base 28 Preset Modes (Resolution) 5 - Detaching the stand base 28 Indicator 6 - Detaching the stand body 6 - Using the cable holder 7 - Mounting on a table 7 - Adjusting the angle 8 - Adjusting the stand height 8 - Using the Kensington locking device 9 - Swivel stand 9 - Using the Pivot function 10 - Mounting on a wall 11 USING THE MONITOR SET 11 Connecting to a PC 11 - D-SUB connection 11 - DVI-D connection 13 - Peripheral device connection 14 CUSTOMIZING SETTINGS 15 Customizing Settings 15 - Menu Settings 16 -Picture 17 -Color 18 -Display 19 -Others 20 MY KEY Setting 21 FUNC. Setting 21 -Picture Mode 22 -SUPER ENERGY SAVING 23 -DUAL DISPLAY 23 -DUAL WEB 24 -MY KEY Setting 29 Proper posture 29 Proper posture for using the Monitor set. ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card Power Cord DVI-D Cable D-SUB Cable (This cable is not included in all (This cable is not included in all countries.) countries.) Stand Base One Screw Cable Holder Audio Cable ( Depending on the country ) CAUTION Do not use any unapproved accessories to ensure the safety and product life span. yy Any damages or injuries by using unapproved accessories are not covered by the warranty. yy NOTE The accessories supplied with your product may vary depending on the model. yy Product specifications or contents in this manual may be changed without prior notice due to upgrade yy of product functions. ENG ENGLISH Unpacking 4 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator y yLED On : Power is on y yLED Off: Power is off (Power Button) Front Side Buttons Input Connectors (See p.11 to 13) ASSEMBLING AND PREPARING Detaching the stand base Attaching the Stand Base 1 Place the monitor's screen face down. 1 Place the Monitor set with the screen side To protect the screen from scratches, cover the surface with a soft cloth. down on a flat and cushioned surface. Caution To protect the screen from scratches, cover yy the surface with a soft cloth. 2 Using a coin, turn the screw in the stand base counterclockwise. Detach the stand base from the stand body. 2 Check the position (at the front and rear) of Stand Body the stand body, then mount the stand base on the stand body as shown in the figure. Stand Body Stand Base Stand Base 3 Using a coin, turn the screw clockwise to secure the stand base. Stand Base Caution The components appearing in the illustrayy tions may look different from the actual product. Do not carry the monitor upside-down as this yy may cause it to fall off its stand, resulting in damage or injury. To avoid damaging the screen when lifting yy or moving the monitor, only hold the stand or the plastic cover. This avoids putting unnecessary pressure on the screen. Only remove the tape and the locking pin yy when the monitor is mounted on the stand base and is in an upright position. Otherwise, the stand body may protrude, which may lead to injury. ENG ENGLISH Setting up the Monitor set 5 6 ASSEMBLING AND PREPARING Detaching the stand body ENGLISH ENG 1 Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver, remove the four screws and detach the stand from the monitor. Using the cable holder 1 2 3 Fix the Knob (Cable holder) to the Hole(Hingebody). Use one screw to fix the Cable Holder and monitor set. Close the Cable holder. ASSEMBLING AND PREPARING Adjusting the angle 1 Lift the monitor and place it on the table in an 1 Place the monitor mounted on the stand base upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation. in an upright position. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 20° backwards for a comfortable viewing experience. 10 cm 10 cm 10 cm 10 cm Rear Side 2 1 2 Connect the Power cord to the monitor, then plug the power cord into the wall outlet. (Before connect please check the “ON/OFF” knob in “O” state). Press the “ON/OFF” knob in “ ” state (Open the power). Front Side Warning To avoid injury to the fingers when adjusting yy the screen, do not hold the lower part of the monitor's frame as illustrated below. Be careful not to touch or press the screen yy area when adjusting the angle of the monitor. 3 Press the (Power) button on the front of the monitor to turn on the monitor. Caution Unplug the power cord prior to moving or yy installing the monitor. There is risk of electric shock. ENG ENGLISH Mounting on a table 7 8 ASSEMBLING AND PREPARING Adjusting the stand height ENGLISH ENG 1 Place the monitor mounted on the stand base in an upright position. 2 Remove the tape attached at the bottom rear of the stand body, then pull out the locking pin. Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect the monitor to the table with the Kensington lock cable. Stand Body Tape Locking Pin 3 The height can be adjusted up to 120 mm. 120.0mm Note Caution Once the pin is removed, it is not necessary yy to re-insert it to adjust the height. Warning Do not put your finger beyy tween the screen and the base (chassis) when adjusting the screen's height. Using the Kensington lock is optional. The yy accessories can be purchased at your local electronics store. ASSEMBLING AND PREPARING Swivel stand 1 Swivel 355 degrees and adjust the angle of the Monitor set to suit your view. Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise. 1 Lift the monitor to its highest height to utilize the Pivot function. 2 Landscape & Portrait : You can rotate the panel 90° clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand Base could crack. Head section Stand section 3 Be careful with the cables when rotating the screen. ENG ENGLISH Image shown may differ from your Monitor yy set. 9 10 ASSEMBLING AND PREPARING Mounting on a wall Model ENGLISH ENG For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible. 5 Please use VESA standard as below. 784.8 mm (30.9 inch) and under yy * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 787.4 mm (31.0 inch) and above yy * Please use VESA standard wall mount pad and screws. 24EB23PM VESA (A x B) 100 x 200 Standard screw M4 Number of screws 8 CAUTION Disconnect the power cord first, and then yy move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or yy slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount yy and contact the local dealer or qualified personnel. Do not over tighten the screws as this may yy cause damage to the Monitor set and void your warranty. Use only screws and wall mounts that yy meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE Use the screws that are listed on the VESA yy standard screw specifications. The wall mount kit will include an installation yy manual and necessary parts. The wall mount bracket is optional. You can yy obtain additional accessories from your local dealer. The length of screws may differ depending yy on the wall mount. Be sure to use the proper length. For more information, refer to the yy instructions supplied with the wall mount. USING THE MONITOR SET 11 USING THE MONITOR SET Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. NOTE When using a D-Sub signal input cable yy connector for Macintosh Mac adapter yy For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector. DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations. ENG ENGLISH Connecting to a PC 12 USING THE MONITOR SET NOTE ENGLISH ENG If you use HDMI PC, it can cause compatibility yy problem. When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ DVI-D) respectively in Monitor set. If you turn the Monitor set on while it is cold, yy the screen may flicker. This is normal. Some red, green, or blue spots may appear yy on the screen. This is normal. CAUTION Connect the signal yy input cable and tighten it by turning the screws clockwise. Do not press the screen yy with your finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the yy screen for a long period of time to prevent image burn. Use a screensaver if possible. Self Image Setting Function Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode) NOTE "Self Image Setting" Function. yy This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) ‘AUTO’ Function. yy When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode) CUSTOMIZING SETTINGS Peripheral device connection Note Peripheral devices are sold separately. yy Cables with angled plugs may have clearyy ance issues, use straight plugs when possible. Angle Type Straight Type Note Headphones, speakers or microphone may yy not work normally, depending on the server PC settings. ENG ENGLISH Connect peripheral devices to the monitor using microphone and headphone ports. 13 14 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. Monitor set Buttons Button Description Accesses the main menus.(See p.15) OSD Locked/OSD Unlocked This function allow you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. Then OSD of “OSD Lock” will appear. After that, user can select lock or unlock by pressing left/right button. If user selects the “Lock” icon by pressing the “OK” button, the message “OSD Locked” will appear. Otherwise, “OSD Unlocked” will appear. After selecting the “Lock”, If you want to change to Unlock, you can push the “MENU” button for several seconds. The message “OSD Unlocked” will appear. Use this button to enter MY KEY menu.For more information.(See p.20) Use this button to enter Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB,MY KEY Setting menus.(See p.21) When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 24EB23PM:1920 x 1200 You can choose the input signal. • When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. • When only one signal is connected, it is automatically detected. The default setting is D-SUB. EXIT Exit the OSD(On Screen Display). (Power Button) Turns the power on or off. Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red. CUSTOMIZING SETTINGS 15 Customizing Settings ENG ENGLISH Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "Next Menu" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Analog Digital Volume Menu ● ● Brightness ● ● Wide/ Original Description To adjust the volume To adjust the brightness of the screen Wide Switch to full screen mode according to input image signal. ● ● Original Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). Reset ● ● Menu > Next Menu Picture Color Restore all factory default settings. Press the◄ , ►buttons to reset immediately. Analog Digital Description Contrast ● ● To adjust the contrast of the screen Sharpness ● ● To adjust the clearness of the screen ● ● To customize the color of the screen Gamma Color Temp Six Color Color Reset Display Horizontal Vertical Clock Phase Others Language ● To adjust the position of the screen ● To improve the clarity and stability of the screen ● ● Off Time Setting ● ● Response Time ● ● Power Indicator Analog: D-SUB(Analog signal) input. yy Digital: DVI-D(Digital signal) input. yy To customize the screen status for a user's operating environment 16 CUSTOMIZING SETTINGS Picture ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu > Next Menu > Picture Description Contrast To adjust the contrast of the screen. Sharpness To adjust the clearness of the screen. CUSTOMIZING SETTINGS 17 Color ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Color by pressing the ► button. 4 Enter to Color by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu > Next Menu > Color Description Gamma Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images. Color Temp Custom • Red:Set your own red color levels. • Green: Set your own green color levels. • Blue:Set your own blue color levels. Select the screen color. Warm: Set the screen to warm color temperature (more red). Medium: Set the screen to medium color temperature. Cool: Set the screen to cool color temperature (more blue). Six Color Color Reset Sets and stores the hue and saturation for six colors(Red/Green/Blue/Cyan/ Magenta/Yellow) to satisfy the color requirements of a user. Hue Adjusts the screen hue. Saturation Adjusts the color sharpness on the screen. Lower values make the color sharpness weaker and colors lighter while higher values make the color sharpness stronger and colors dark. Resets the color settings to the factory default settings for the current input device. 18 CUSTOMIZING SETTINGS Display ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Display by pressing the ► button. 4 Enter to Display by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu > Next Menu > Display Description Horizontal To move image left and right. Vertical To move image up and down. Clock To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. CUSTOMIZING SETTINGS 19 Others ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Others by pressing the ► button. 4 Enter to Others by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu > Next Menu > Others Description Language To choose the language in which the control names are displayed. Power Indicator Use this function to set the power indicator on the bottom side of the monitor to On or Off.If you set Off, it will go off. If you set On at any time, the power indicator will automatically be turned on. Off Time Setting The monitor set will switch to power off mode after the time to be chosen by user (1 ~ 24 hours) Response Time You can set a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use 'Off'. For a fast-moving picture, it is recommended that you use 'Low/Middle/High'. 20 CUSTOMIZING SETTINGS MY KEY Setting ENGLISH ENG 1 Press MY KEY button on the bottom of the Monitor set to display the MY KEY OSD. 2 Set the options by pressing the ◄or►or▼buttons. 3 Select EXIT to leave the OSD menu. Each option is explained below. MY KEY Description MY KEY Setting MY KEY is short key. You can select one of FUNC. (Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature. Back Select Back to return MY KEY menu. CUSTOMIZING SETTINGS 21 FUNC. Setting ENG ENGLISH Picture Mode 1 Press FUNC. button on the bottom of theMonitor set to display the FUNC. OSD. 2 Enter to Picture Mode by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► buttons. 4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow( )button. Each option is explained below. Picture Mode Description Custom It is a mode that theuser can adjust each element.It can adjust the color mode of the Main Menu. Text It is a mode that thescreen is adjusted to the best for the textworks. Photo It is a mode that thescreen is adjusted to the best to view pictures. Cinema It is a mode that thescreen is adjusted to the best to view the videos. Game It is a mode that thescreen is adjusted to the best to play a game. 22 CUSTOMIZING SETTINGS SUPER ENERGY SAVING ENGLISH ENG 1 Press FUNC. button onthe bottom of the Monitor set to display the FUNC. OSD. 2 Select SUPER ENERGY SAVING by pressing the ► button. 3 Enter to SUPER ENERGY SAVING by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼buttons. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, usethe up arrow ( ) button. Each option is explained below. SUPER ENERGY SAVING Description On Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function Off Disables SUPER ENERGY SAVING. Reset Resets the values of total energy consumption reduction and CO2 emission reduction estimates. NOTE TOTAL POWER REDUCTION: How much power is saved while using the monitor. yy TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. yy SAVING DATA(W/h) yy 609 mm (24 inch) SUPER SAVING 6 W/h Saving Data depends on the Panel. So,those values should be different from each panel and panel yy vendor. LG calculated these values by using “broadcast video signal” yy (including broadcast video: IEC 62087) SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING yy function. CUSTOMIZING SETTINGS 23 * Before using below functions, please install DUAL SMART SOLUTION programme. ENG ENGLISH DUAL DISPLAY 1 Press FUNC. button onthe bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL DISPLAY by pressing the ► button. 3 Enter to DUAL DISPLAY by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT toleave the OSD menu.To return to the upper menu or set other menu items, usethe up arrow ( ) button. Each option is explained below. DUAL DISPLAY Description Clone By selecting Clone,user can use secondary monitor as done mode of primary monitor. Extended By selecting Extended,user can use secondary monitor as extended mode of primary monitor. Off If select Off,DUAL DISPLAY is off. * Before using below functions, please install DUAL SMART SOLUTION programme. DUAL WEB 1 Press FUNC. button onthe bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL WEB by pressing the ► button. 3 Enter to DUAL WEB by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT toleave the OSD menu.To return to the upper menu or set other menu items, usethe up arrow ( ) button. Each option is explained below. DUAL WEB Description On Help user to browse web efficiently by dividing in half. Help to arrange and move windowson screen. Help user to control dividedwindows ratio. Off If select Off,DUAL WEB is off. NOTE When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD yy appear and user should press dual button -> User can bring back to normal mode. 24 CUSTOMIZING SETTINGS MY KEY Setting ENGLISH ENG 1 Press FUNC. button onthe bottom of the Monitor set to display the FUNC. OSD. 2 Select MY KEY Setting by pressing the ► button. 3 Enter to MY KEY Setting by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT toleave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MY KEY Setting Description Picture Mode Picture Mode adjust the Monitor set for the best picture appearance. SUPER ENERGY SAVING Enables SUPER ENERGY SAVING you can save energy with this energy-effcient function. DUAL DISPLAY User can use Clone or Extended in another monitor. DUAL WEB Help user to browse web efficiently by dividing in half and some other convenience in browsing dual pages. TROUBLESHOOTING 25 Check the following before calling for service. No image appears Is the power cord of the display connected? y y Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? y y Press the Power button. y y Adjust the brightness and the contrast. Is the power on and the power indicator Red? Is the power indicator flickering? y y If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. y y Try to turn on the PC. Do you see an "OUT OF RANGE" message on the screen? y y This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. Do you see a "NO SIGNAL" message on the screen? y y When the monitor is on "No-Signal" in 5 minutes, the monitor goes to DPM mode. Do you see a "OSD LOCKED" message on the screen? Do you see “OSD LOCKED” when you push MENU button? y y You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. Display image is incorrect Display Position is incorrect. y y Press the AUTO button to automatically adjust your display image to the ideal setting. On the screen background, vertical y y Press the AUTO button to automatically adjust your display image to bars or stripes are visible. the ideal setting. Any horizontal noise appearing in any image or characters are not clearly portrayed. y y Press the AUTO button to automatically adjust your display image to the ideal setting. y y Check Control Panel ► Display ► Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). ENG ENGLISH TROUBLESHOOTING 26 TROUBLESHOOTING CAUTION ENGLISH ENG Check Control Panel ► Display ► Settings and see if the frequency or the resolution were yy changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the yy screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned yy above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Display image is incorrect The screen color is mono or abnormal. y y Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. y y Make sure the video card is properly inserted in the slot. y y Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. y y Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display driver? y y Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y y Make sure to check if the video card supports Plug&Play function. SPECIFICATIONS 27 24EB23PM Display Sync Input Video Input Resolution Plug & Play Power Consumption Power Input Dimensions (Width x Height x Depth) Weight Screen Type 60.9 cm (24 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 60.9 cm Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max 0.27 mm x 0.27 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB,DVI-D) Separate Sync. Digital 15 pin D-SUB Connector /DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1200 @ 60 Hz DVI (Digital) : 1920 x 1200 @ 60 Hz VESA 1920 x 1200 @ 60 Hz Recommend DDC 2B(Analog,Digital) On Mode : 28 W(Typ.) Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W AC 100-240V ~ 50/60Hz 1.2A With Stand 55.8 cm x 39.5 cm x 23.9 cm Without Stand 55.8 cm x 37.0 cm x 5.8 cm 5.4 kg Tilt Range -5° to 20° Environmental conditions Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity Stand Base Power cord -20°C to 60 °C 5 % to 90 % non-Condensing Attached ( ), Detached (O) Wall-outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions. ENG ENGLISH SPECIFICATIONS 28 SPECIFICATIONS Preset Modes (Resolution) ENGLISH ENG 24EB23PM Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 -/- 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.500 60 +/+ 1920 x 1200 74.038 59.95 +/- Indicator Mode LED Color On Mode Red Sleep Mode Blinking Red Off Mode Off Recommend Mode Proper posture 29 ENG ENGLISH Proper posture Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light. Declaration of Conformity Trade Name: LG Model : 24EB23PMC Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project