LG | 27MP77HM | LG 24MP77 Owner’s Manual

Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating
your set and retain it for future reference.
IPS LED MONITOR MODEL
24MP77HM 27MP77HM
24MP77SM 27MP77SM
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
CONTENTS
3
LICENSE
4
ASSEMBLING AND PREPARING
4
Unpacking
6
Parts and buttons
7
- How to Use the Joystick Button
8
Moving and Lifting the Monitor
9
Setting up the Monitor set
9
- Attaching the Stand Base
10
- Detaching the Stand Base
11
- Mounting on a table
11
- Using the cable holder
13
- Mounting on a wall
21 CUSTOMIZING SETTINGS
22
Customizing settings
22
- Menu Settings
22
- -Quick Settings
24
- -Picture
26
- -General
27
- -Auto Configuration
28
- -Reset
29
- -Picture mode
30 TROUBLESHOOTING
32‌SPECIFICATIONS
36
Preset Modes (Resolution)
14 USING THE MONITOR SET
36
Indicator
14
Connecting to a PC
14
- D-SUB connection
37 PROPER POSTURE
14
- HDMI connection
15
Connecting to AV Devices
15
- HDMI connection
16
Connecting to External Devices
16
- Peripheral device connection
17 INSTALLING THE LG MONITOR SOFTWARE
17
Installing The Screen Split
19
Installing The LG Color Cloning
37
Proper posture for using the Monitor set.
38 CUD ( COLOR UNIVERSAL
DESIGN) CERTIFICATION
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to
meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
ENG
ENGLISH
LICENSE
3
4
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
ENGLISH
ENG
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
CD(Owner's Manual) /
Card
D-SUB Cable
( This cable is not included in all
countries. )
HDMI Cable
( This cable is not included in all
countries. )
or
Power Cord
AC-DC Adapter
( Depending on the country )
Stand Body
Stand Base
AC-DC Adapter
( Depending on the country )
Cable Holder
Screws
ASSEMBLING AND PREPARING
5
CAUTION
NOTE
yy The accessories supplied with your product may vary depending on the model.
yy Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
ENG
ENGLISH
yy Do not use any unapproved accessories to ensure the safety and product life span.
yy Any damages or injuries by using unapproved accessories are not covered by the warranty.
6
ASSEMBLING AND PREPARING
Parts and buttons
ENGLISH
ENG
Power Indicator
yy On: power is on
yy Off: power is off
(Joystick Button)
Connection panel (See p.14~16)
NOTE
yy The joystick button is located at the bottom of the monitor.
ASSEMBLING AND PREPARING
7
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
◄/►
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off
the monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
ENG
ENGLISH
How to Use the Joystick Button
8
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
ENGLISH
ENG
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation regardless of its shape or size.
yy It is advisable to place the monitor in the
original box or packing material before attempting to move it.
yy Before moving or lifting the monitor, disconnect the power cord and all cables.
yy Hold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
yy When holding the monitor, the screen should
face away from you to prevent it being
scratched.
yy When moving the monitor, avoid any strong
shock or vibrations to the product.
yy When moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
CAUTION
yy As far as possible, avoid touching the monitor screen. This may result in damage to the
screen or some of the pixels used to create
images.
ASSEMBLING AND PREPARING
Setting up the Monitor set
4 Attach the Cable holder.
1 Insert the cable holder into the hook of the
stand body.
2 Press down the cable holder as shown in
illustration.
1 Place the screen face down.
CAUTION
yy To protect the screen from scratches, cover
the surface with a soft cloth.
Cable holder
2 Check the direction of the standbody
(front, back) and then mount thestand body
onto the stand hinge.
Tighten two screws into the back of the stand
body .
Screws
1
2
Stand Body
Stand Hinge
3
1 Insert the stand base into the hook of the
stand body.
2 Tighten the screw to the right.
Stand Body
CAUTION
Applying excessive force when tightening
the screws may cause damage to the monitor. Damage caused in this way will not be
covered by the product warranty.
CAUTION
It may hurt your foot off the stand, so be
careful.
Stand Base
ENG
ENGLISH
Attaching the Stand Base
9
10
ASSEMBLING AND PREPARING
Detaching the Stand Base
ENGLISH
ENG
1 Place the screen face down.
4 Remove the two screws on the back of stand
body.
As shown in the illustration, disconnect the
stand body from the stand hinge.
CAUTION
Screws
yy To protect the screen from scratches, cover
the surface with a soft cloth.
2
1 Turn the screw to the left.
2 Pull out the Stand Base.
Stand Body
2
Stand Hinge
2
Stand Body
CAUTION
Stand Base
3 As shown in the illustration,put your hand on
the right groove of cable holder, pull cable
holder out to separate it from the set.
Cable holder
yy Illustrations in this document represent typical procedures, so they may look different
from the actual product.
yy Do not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result
in personal injury.
yy When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
yy If you use the monitor panel without the
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.
ASSEMBLING AND PREPARING
Mounting on a table
3 Press the joystick button on the bottom of the
position on a table.
Leave a 100 mm (minimum) space from the
wall for proper ventilation.
CAUTION
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
100 mm
100 mm
100 mm
Using the cable holder
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
(19 V
)
Cable holder
or
(19 V
)
ENG
ENGLISH
monitor to turn on the monitor.
1 Lift and tilt the Monitor set into its upright
100 mm
11
12
ASSEMBLING AND PREPARING
WARNING
Using the Kensington security system
ENGLISH
ENG
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
Do not touch or press the screen when
adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor
screen can detach from stand base and injure
your body.
NOTE
The Kensington security system is optional.
You can obtain it from most electronics stores.
NOTE
Tilt from +20 to -3 degrees up or down to adjust
the angle of the Monitor set to suit your view.
Front
Rear
ASSEMBLING AND PREPARING
Mounting on a wall
yy Wall Mount (A x B)
100 mm
100 mm
100 mm
100 mm
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.
1 If you use screw longer than standard, the monitor might be damaged internally.
2 If you use improper screw, the product might be
damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
Wall Mount
(A x B)
Standard
screw
Number of
screws
Wall Mount
Plate
(Optional)
24MP77HM
27MP77HM
24MP77SM
27MP77SM
75 x 75
100 x 100
M4 x L10
4
RW120
A
ENG
ENGLISH
For proper ventilation, allow a clearance of 100
mm on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
Model
13
B
CAUTION
yy Disconnect the power cord first, and then
move or install the Monitor set. Otherwise
electric shock may occur.
yy If you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury.
yy Use only an authorized LG wall mount
and contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this may
cause damage to the Monitor set and void
your warranty.
yy Use only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
yy Screw length from outer surface of back
cover should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
Max.8mm
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit will include an installation
manual and necessary parts.
yy The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
yy The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
yy For more information, refer to the
instructions supplied with the wall mount.
14
USING THE MONITOR SET
USING THE MONITOR SET
ENGLISH
Connecting to a PC
yy Your Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
NOTE
NOTE
yy When using a D-Sub signal input cable
connector for Macintosh
yy Mac adapter
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
yy If you use HDMI PC, it can cause compatibility
problem.
yy Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
yy Recommended HDMI cable types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
USING THE MONITOR SET
CAUTION
Connecting to AV Devices
HDMI connection
Transmits the digital video and audio signals from
your AV devices to the monitor. Connect your AV
device to the monitor with the HDMI cable as illustrated below.
NOTE
yy When you want to use two PC in our Monitor,
please connect the signal cable(D-SUB/
HDMI) respectively in Monitor set.
yy If you turn the Monitor set on while it is cold,
the screen may flicker. This is normal.
yy Some red, green, or blue spots may appear
on the screen. This is normal.
NOTE
yy If you use HDMI PC, it can cause compatibility
problem.
yy Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
yy Recommended HDMI cable types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
ENG
ENGLISH
yy Connect the signal input cable and
tighten it by turning the screws
clockwise.
yy Do not press the screen with your
finger for a long time as this may result in
temporary distortion on the screen.
yy Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
15
16
USING THE MONITOR SET
Connecting to External Devices
ENGLISH
Peripheral device connection
Connect peripheral devices to the monitor.
NOTE
yy Peripheral devices are sold separately.
yy Cables with angled plugs may have clearance issues, use straight plugs when possible.
Angle Type
Straight Type
NOTE
yy Headphones or speakers may not work normally, depending on the server PC settings.
INSTALLING LG MONITOR SOFTWARE
17
INSTALLING THE LG MONITOR SOFTWARE
Insert the the owner's manual CD included in the product package into your PC's CD driver and install the
Screen Split.
1 Set the default Web browser to Internet Explorer.
2 Click the "Screen Split" on the CD's main
screen. When the file download window
appears, click the Run button. (The file
download window may vary depending on the
operating system and the Internet Explorer
version, but the installation procedures are
same.)
CAUTION
yy Service Pack 1 or higher is required for
Windows 7 & Windows 8.
3 Follow the instructions to proceed with the
installation.
4 Check "I accept the terms of the agreement" on
the License Agreement screen and then click
the [Next] button.
ENG
ENGLISH
Installing The Screen Split
18
INSTALLING LG MONITOR SOFTWARE
5 The Screen Split installation starts as shown
ENGLISH
ENG
below.
NOTE
yy Screen Split: This program automatically
splits the program window as desired.
Monitor Selection only supported in extend
display.
This program supported Windows 7 &
Windows 8.
6 When the installation is complete, restart your
system.
NOTE
If you run Screen Split, the Screen Split icon [
] appears in the system tray at the right bottom of
the PC screen.
Right-click the Screen Split icon and select a
layout you want.
INSTALLING LG MONITOR SOFTWARE
19
Installing The LG Color Cloning
1 Set the default Web browser to Internet Explorer.
3 Follow the instructions to proceed with the
installation.
2 Click the "LG Color Cloning" on the CD's
main screen. When the file download window
appears, click the Run button. (The file
download window may vary depending on the
operating system and the Internet Explorer
version, but the installation procedures are
same.)
CAUTION
yy Service Pack 1 or higher is required for
Windows 7 & Windows 8.
4 Check the I accept the terms of the agreement checkbox on the License Agreement
screen and then click the Next button.
5 Click the install button.
ENG
ENGLISH
Insert the the owner's manual CD included in the product package into your PC's CD driver and install the
LG Color Cloning.
The installation screen images are for reference only. The actual installation screen images may vary de
pending on the model.
20
INSTALLING LG MONITOR SOFTWARE
6 The LG Color Cloning starts the installation as
ENGLISH
ENG
shown below.
NOTE
yy LG Color Cloning: This program matches
the color quality and brightness of two
monitors using your Smartphone.
NOTE
yy Double-click the LG Color Cloning icon on
des-ktop to run LG Color Cloning Application.
7 Click the complete button.
8 When the installation is complete, restart
your system.
yy To use the LG Color Cloning function, you
must execute both the “LG Color Cloning”
Windows application and the “LG Color
Cloning” android application at the same
time.
yy For details on supported Smartphones and
graphic cards, see the LG Color Cloning
help manual.
INSTALLING THE LG COLOR CLONING APPLI
CATION (ANDROID)
1. Open the playstore on your android phone.
2. Search “LG Color Cloning” on the playstore.
yy If you read the QR code on the first page
of the on “LG Color Cloning” Windows
Application, you can open the download page
of the“LG Color Cloning” android application.
yy For details, see the LG Color Cloning help
manual
.
3. Click “install” button.
When the installation of “LG Color Cloning”
Android Application is complete, the LG Color
Cloning icon appears on your “Application”.
CUSTOMIZING SETTINGS
21
CUSTOMIZING SETTINGS
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3 Press the joystick button once more to exit the main menu.
Power Indicator
Joystick Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor: You can turn off
the monitor this way at any time, including when the OSD is on.)
◄
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
►
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
▲
Operates the Input change.
Main menu disabled Enables the main menu.
Main menu enabled
▼
Enters the menu features.
Enters the picture mode feature.
Main menu disabled Enables the main menu.
Main menu enabled
Turns off the monitor.
Main Menu Features
Main Menu
Menu
Configures the screen settings.
Picture Mode
Select picture mode to achieve the best display effect.
Input
You can choose the input signal.
• When two input signals are connected, you can select the input
signal (D-SUB/HDMI) you want.
• When only one signal is connected, it is automatically detected.
The default setting is D-SUB.
Monitor off
Turns off the monitor.
Exit
Exits the main menu.
Monitor Off.
Monitor Off.
Monitor Off.
Monitor Off.
Monitor Off.
Description
ENG
ENGLISH
Activating the Main Menu
22
CUSTOMIZING SETTINGS
Customizing settings
ENGLISH
ENG
Menu Settings
-Quick Settings
1 To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
2 Go to Quick Settings > Brightness by moving the joystick.
3 Configure the options following the instructions that appear in the
bottom right corner.
4 To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until you
exit.
Each option is described below.
Menu > Quick Settings
Brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume.
NOTE
yy Jog joystick button down (
) in the Volume menu will enable/disable
the Mute function.
Ratio
Adjusts the screen ratio.
Wide
SMART ENERGY
SAVING
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays a video according to the input video signal aspect ratio.
High
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient
function.
Low
Enables SMART ENERGY SAVING you can save energy with this energy- low efficient
function.
Off
Disables SMART ENERGY SAVING .
* SMART ENERGY SAVING: Conserve energy by using luminance compensation algorithm.
NOTE
yy The display may look the same for Wide, Original options at the recommended resolution (1920 x
1080).
yy The ratio is disabled in the interlaced signal.
CUSTOMIZING SETTINGS
23
NOTE
ENG
ENGLISH
yy Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or
lower depend on source.
yy If option of SMART ENERGY SAVING is High or Low, Picture Mode will automatically be Custom and
Color Wizard will automatically be Off.
24
CUSTOMIZING SETTINGS
-Picture
ENGLISH
ENG
1 To view the OSD menu, press the joystick button at
the bottom of the monitor and then enter the Menu.
2 Go to Picture by moving the joystick.
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Picture
Picture Mode
Color wizard
Description
Custom
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader 1
It is a mode that the screen is adjusted to the best for the newspaper. If you want
screen more bright, you can control brightness in Menu OSD.
Reader 2
It is a mode that the screen is adjusted to the best for the cartoon. If you want screen
more bright, you can control brightness in Menu OSD.
Photo
Optimizes the screen to view photos.
Cinema
Optimizes the screen to improve the visual effects of a video.
Game
Optimizes the screen for gameplay.
Red
weakness
It is a mode for user who has inability to see red color. It make color weakness user
can easily distinguish red colors.
Green
weakness
It is a mode for user who has inability to see green color. It make color weakness user
can easily distinguish green colors.
Off
It is a mode that Color Wizard mode is off.
NOTE
yy “Color wizard” feature is not within the scope of CUD certification.
yy This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen,
please turn off this function.
yy This function can’t distinguish some colors in some images.
yy If option of Color Wizard is not Off , SMART ENERGY SAVING will be Off and Picture Mode will
automatically be Custom.
CUSTOMIZING SETTINGS
P i c t u r e Picture
Adjust
SUPER RESOLUTION+
Optimized picture quality is displayed when a user wants
crystal clear images. It is effective forhigh quality video or
game.
Middle
The optimized picture quality is displayed when a user
wants images between low and highmodes for comfortable
viewing. It is effective for UCC or SD video.
Low
The optimized picture quality is displayed when a user
wants smooth and natural images. It iseffective for slowmoving pictures or still images.
Off
Select this option for everyday viewing. SUPER
RESOLUTION+ is turned off in this mode.
Adjusts the sharpness of the screen.
Black Level
Sets the offset level (for HDMI only).
yy Offset: as a reference for a video signal, this is the darkest color the
monitor can display.
High
The picture of the screen gets brighter.
Low
The picture of the screen gets darker.
Sets a response time for displayed pictures based on the speed of the
screen. For a normal environment, it is recommended that you use Normal. For a fast-moving picture, it is recommended that you use High.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Off
Sets the response time to Off.
Overscan
To select the range of output image for DTV timing in HDMI input.(only
for HDMI input)Recommend Overscan function to turn on when connect
AV equipment.
Gamma
Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2, Off on
the monitor, high gamma values display whitish images and low gamma
values display blackish images.
If user don't want adjusted gamma, user can select Gamma off.
Color Temp
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom
Red
Green
Blue
Six Color
You can customize the picture color using Red, Green,
and Blue colors.
Meets the user requirements for colors through adjusting the color and
saturation of the six colors(Red_Hue, Red_Saturation, Green_Hue,
Green_Saturation, Blue_Hue, Blue_Saturation, Cyan_Hue, Cyan_
Saturation, Magenta_Hue, Magenta_Saturation, Yellow_Hue, Yellow_
Saturation) and saving the settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the
value, less saturated and bright the colors become. The higher the value,
the more saturated and dark the colors become.
Reset
Display
Returns the color settings to the default settings.
Horizontal To move image left and right.
Vertical
To move image up and down.
Clock
To minimize any vertical bars or stripes visible on the screen background.The horizontal screen
size will also change.
Phase
To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or
sharpen the image of characters.
ENG
ENGLISH
High
Sharpness
Response Time
Color
25
26
CUSTOMIZING SETTINGS
-General
ENGLISH
ENG
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the
Menu.
2 Go to General by moving the joystick.
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > General
Description
Audio Input
To select the input of audio.
HDMI : Set the input of audio to HDMI input source
Audio-In : Set the input of audio to PC line-in
Auto : Automatically set the input of audio to HDMI or Audio-in
Language
To choose the language in which the control names are displayed.
Power LED
Turns the power indicator on the front side of the monitor on/off.
On
The power indicator is automatically turned on.
Off
The power indicator is turned off.
Automatic Standby
The monitor will automatically switch to standby mode after a certain period.
Resolution
User can set the desired resolution.This option is enabled only when the screen resolution on
your computer is set to the following (D-SUB only).
NOTE
The function is enabled only when the screen resolution on your computer is set to the
following, except that the PC output wrong resolution.
24MP77HM
1024x768, 1280x768, 1360x768, 1366x768,Off
27MP77HM
1280x960, 1600x900,Off
24MP77SM
1440x900, 1600x900,Off
27MP77SM
OSD Lock
Prevents incorrect key input.
On
Key input is disabled.
NOTE
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast, Volume, Input, and General are disabled.
Off
Key input is enabled.
CUSTOMIZING SETTINGS
27
-Auto Configuration
2 Go to Auto Configuration by moving the joystick.
3 Configure the options following the instructions that appear in the
bottom right corner.
4 To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Each option is described below.
Menu > Auto Configuration
Description
Do you want to Auto Configuration?
Yes
Operate the Auto Configuration for optimal display in D-SUB.
Cancel
Cancel the select.
NOTE
yy This function will be enable only in analog input.
ENG
ENGLISH
1 To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
28
CUSTOMIZING SETTINGS
-Reset
ENGLISH
ENG
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the
Menu.
2 Go to Reset by moving the joystick.
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Reset
Description
Do you want to reset your settings?
Reset
Returns to the default settings.
Cancel
Cancel the select.
CUSTOMIZING SETTINGS
29
-Picture mode
2 Go to Picture mode by moving the joystick button to ▲.
3 Configure the options following the instructions that appear in the
bottom.
Each option is described below.
Joystick Button
> Picture Mode
Picture Mode
Description
Custom
Allows the user to adjust each element. The color mode of the main menu can be
adjusted.
Reader 1
It is a mode that the screen is adjusted to the best for the newspaper. If you want
screen more bright, you can control brightness in Menu OSD.
Reader 2
It is a mode that the screen is adjusted to the best for the cartoon. If you want
screen more bright, you can control brightness in Menu OSD.
Photo
Optimizes the screen to view photos.
Cinema
Optimizes the screen to improve the visual effects of a video.
Game
Optimizes the screen for gameplay.
NOTE
yy If option of Picture Mode is non-Custom , SMART ENERGY SAVING and Color Wizard will
automatically be Off.
ENG
ENGLISH
1 Press the joystick button on the bottom of the monitor.
30
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
Check the following before calling for service.
No image appears
Is the power cord of the display
connected?
Is the power indicator light on?
Is the power indicator flickering?
Do you see an "OUT OF RANGE"
message on the screen?
Do you see a "NO SIGNAL"
message on the screen?
yy Check and see if the power cord is connected properly to the power
outlet.
yy Press the Power button.
yy If the display is in power saving mode, try moving the mouse or
pressing any key on the keyboard to bring up the screen.
yy Try to turn on the PC.
yy This message appears when the signal from the PC (video card) is
out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display
again.
yy When the monitor is on "No-Signal" in 5 minutes, the monitor goes to
DPM mode.
Can 't you control some functions in OSD?
Do you see “OSD LOCKED” when
you push MENU button?
Can't you select some menu in
OSD?
yy You can secure the current control settings, so that they cannot be
inadvertently changed.
yy You can unlock the OSD controls at any time by entering the OSD
lock menu and changing items to off.
Display image is incorrect
Display Position is incorrect.
On the screen background, vertical
bars or stripes are visible.
Any horizontal noise appearing in
any image or characters are not
clearly portrayed.
yy Enter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yy Enter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yy Enter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yy Check Control Panel ► Display ► Settings and adjust the display to
the recommended resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits (true color).
TROUBLESHOOTING
31
CAUTION
Display image is incorrect
The screen color is mono or
abnormal.
yy Check if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
yy Make sure the video card is properly inserted in the slot.
yy Set the color setting higher than 24 bits (true color) at Control Panel
► Settings.
The screen blinks.
yy Check if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
yy Be sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended
resolution?
yy If the selected resolution is HDMI 1080i 60/50 Hz, the screen may
be flickering. Change the resolution to the recommended resolution
1080P.
ENG
ENGLISH
yy Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
changed. If yes, readjust the video card to the recommend resolution.
yy If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
yy The setting method can differ by computer and O/S (Operation System), and resolution mentioned
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
32
SPECIFICATIONS
ENGLISH
ENG
‌SPECIFICATIONS
24MP77HM 24MP77SM
Display
Resolution
Power
Consumption
Power Input
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.2745 mm x 0.2745 mm (Pixel Pitch)
Max
1920 x 1080 @ 60 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
On Mode : 21 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
1.6 A
19 V
AC-DC Adapter
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Speaker Wattage
Dimensions
(Width x Height x
Depth)
Weight
5W+5W
With Stand
Without Stand
Tilt Range
-3° to 20°
Environmental
conditions
Operating Temperature 10°C to 35 °C
Operating Humidity
10 % to 80 %
OUTPUT: 19 V
1.7 A
3.5 kg
Storage Temperature
Storage Humidity
Stand Base
Power cord
54.2 cm x 42.8 cm x 18.2 cm
54.2 cm x 32.8 cm x 5.2 cm
-20°C to 60 °C
5 % to 90 % non-Condensing
Attached ( ), Detached (O)
Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
SPECIFICATIONS
Horizontal Frequency
30 kHz to 83 kHz (Automatic)
Vertical Frequency
56 Hz to 75 Hz (D-SUB)
●
56 Hz to 61 Hz (HDMI)
Separate Sync.
Digital
15 pin D-SUB Connector
●
HDMI Connector
RGB Analog (0.7 Vp-p/ 75 ohm)
Digital
●
Input Form
Video Input
Signal Input
Input Form
Plug & Play
24MP77HM
24MP77SM
●
●
●
●
●
●
DDC 2B(Analog)
●
DDC 2B(HDMI)
●
ENG
ENGLISH
Sync Input
33
34
SPECIFICATIONS
‌SPECIFICATIONS
ENGLISH
ENG
27MP77HM 27MP77SM
Display
Resolution
Power
Consumption
Power Input
Screen Type
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch
0.3114 mm x 0.3114 mm (Pixel Pitch)
Max
1920 x 1080 @ 60 Hz
Recommend
VESA 1920 x 1080 @ 60 Hz
On Mode : 25 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
1.6 A
19 V
AC-DC Adapter
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Speaker Wattage
Dimensions
(Width x Height x
Depth)
Weight
5W+5W
With Stand
Without Stand
Tilt Range
-3° to 20°
Environmental
conditions
Operating Temperature 10°C to 35 °C
Operating Humidity
10 % to 80 %
OUTPUT: 19 V
1.7 A
4.8 kg
Storage Temperature
Storage Humidity
Stand Base
Power cord
61.4 cm x 46.9 cm x 18.2 cm
61.4 cm x 36.9 cm x 5.2 cm
-20°C to 60 °C
5 % to 90 % non-Condensing
Attached ( ), Detached (O)
Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
SPECIFICATIONS
Horizontal Frequency
30 kHz to 83 kHz (Automatic)
Vertical Frequency
56 Hz to 75 Hz (D-SUB)
●
56 Hz to 61 Hz (HDMI)
Separate Sync.
Digital
15 pin D-SUB Connector
●
HDMI Connector
RGB Analog (0.7 Vp-p/ 75 ohm)
Digital
●
Input Form
Video Input
Signal Input
Input Form
Plug & Play
27MP77HM
27MP77SM
●
●
●
●
●
●
DDC 2B(Analog)
●
DDC 2B(HDMI)
●
ENG
ENGLISH
Sync Input
35
36
SPECIFICATIONS
Preset Modes (Resolution)
ENGLISH
ENG
D-SUB Timing
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70
-/+
640 x 480
31.469
60
-/-
640 x 480
37.500
75
-/-
800 x 600
37.879
60
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.023
75
+/+
1152 x 864
67.500
75
+/+
1280 x 1024
63.981
60
+/+
1280 x 1024
79.976
75
+/+
1680 x 1050
65.290
60
-/+
1920 x 1080
67.500
60
+/+
Recommend Mode
HDMI Timing
Factory support mode
(Preset Mode)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
480P
31.50
60
O
576P
31.25
50
O
720P
37.50
50
O
720P
45.00
60
O
1080P
56.25
50
O
1080P
67.50
60
O
Recommend Mode
Indicator
Mode
LED Color
On Mode
White (Only 15 seconds)
Sleep Mode
Blinking White
Off Mode
Off
HDMI
PROPER POSTURE
37
ENG
ENGLISH
PROPER POSTURE
Proper posture for using the Monitor set.
Adjust the
Monitor set and
your posture to
allow you to view
images at the
optimal viewing
angle.
Place your hands
gently on the
keyboard, keeping
your arms bent at
the elbows and
horizontally outright.
Adjust the location of the
Monitor set to avoid it
reflecting light.
38
Color Universal Design
CUD ( COLOR UNIVERSAL DESIGN) CERTIFICATION
ENGLISH
Color Universal Design is a user-oriented optimum design of coloring patterns or character shapes ,
to allow information to be accurately conveyed to all the people.
The colors of OSD Menu and User’s Manual have been designed in consideration of the colorblind
people for convenient operation.
As to OSD Menu and User’s Manual, LG Electronics has passed the certification of the non-profit Color
Universal Design Organization (CUDO).
What’s CUD mark?
The Color Universal Design mark is received from the non-profit Color Universal Design
Organization (CUDO)when the Monitor is certified to be able to convey information to the
colorblind people by giving consideration of coloring patterns or character shapes.
CUDO Official Website: http://www.cudo.jp/summary/cudo_e
Declaration of Conformity
Trade Name: LG
Model : 24MP77HM,27MP77HM, 24MP77SM,
27MP77SM
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL: 201-266-2534
*above information is only for USA FCC Regulatory
Make sure to read the Safety Precautions before
using the product.
Keep the Owner’s Manual (CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Download PDF

advertising