ENGLISH OWNER’S MANUAL LED TV (CINEMA 3D Smart TV) LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating the your TV and retain it for future reference. 27MT93D www.lg.com 2 TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 3 LICENSES 27 REMOTE CONTROL 4 INSTALLATION PROCEDURE 29 MAGIC REMOTE CONTROL 5 ASSEMBLING AND PREPARING 5 7 8 9 10 10 11 12 13 Unpacking -Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV -Attaching the Stand -Mounting on a table -Tidying cables -Detaching the Stand 30 30 30 Registering Magic Remote Control How to use Magic Remote Control Precautions to Take when Using the Magic Remote Control 31 USING THE USER GUIDE 14 WATCHING TV 14 Turning the TV on for the first time 16 MAKING CONNECTIONS 16 17 Connecting an antenna Connecting to a HD receiver, DVD, VCR player or Gaming device -HDMI connection -HDMI to DVI connection -Component connection -Composite connection -Headphone connection Connecting to a USB MHL connection Connecting to a PC -HDMI connection -HDMI to DVI connection 17 18 19 20 21 22 23 24 25 26 FUNCTIONS 32 MAINTENANCE 32 32 32 32 33 Cleaning Your TV Screen and frame Cabinet and stand Power cord Preventing “Image burn” or “Burn-in” on your TV screen 34 IF THE QUALITY OF THE 3D IMAGE IS NOT ACCEPTABLE, CHECK THE FOLLOWING 35 VIEWING 3D IMAGING 37 TROUBLESHOOTING 37 37 General Using 3D mode 38 SPECIFICATIONS LICENSES 3 LICENSES Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. ENGLISH Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. 4 INSTALLATION PROCEDURE INSTALLATION PROCEDURE ENGLISH 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV. 3 Connect an external device to the TV. NOTE Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are yy using. New features may be added to this TV in the future. yy ASSEMBLING AND PREPARING 5 ASSEMBLING AND PREPARING ENGLISH Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. NOTE The accessories supplied with your product may vary depending on the model. yy Product specifications or contents in this manual may be changed without prior notice due to yy upgrade of product functions. CAUTION Do not use any pirated items to ensure the safety and product life span. yy Any damages or injuries by using pirated items are not covered by the warranty. yy NOTE The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to yy upgrade of product functions. For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick yy and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. B B A A *A *B 10 mm 18 mm 6 ASSEMBLING AND PREPARING ENGLISH ⱞⳮ ➎Ẳ㞢 EDFN KRPH /Q.MENU /Q.MENU ⰶᲳ YRO Remote control Batteries (AAA) ㄮᗺ FK Magic Remote Control. Batteries (AA) CD (Owner's Manual)/Cards or Power Cord Component video cable Screw Cover AC-DC Adapter Composite audio/video cable Screws 2 EA 3D Glasses(Normal type 2 EA) -The number of 3D glasses may differ depending on the model or country. -Image shown may differ from your TV. MHL passive cable Stand Base Cable holder ASSEMBLING AND PREPARING 7 Separate purchase ENGLISH EDFN KRPH /Q.MENU YRO FK Dual play glasses Magic Remote Control Video call camera AG-F2**DP, AG-F3**DP AN-MR400 AN-VC*** NOTE The illustrations in this manual may differ from the actual product and accessories. yy Separate purchase items can be changed or modified for quality improvement without any yy notification. Contact your dealer to buying these items. yy The model name or design may be changed depending on the upgrade of product yy functions,manufacturer’s circumstances or policies. 8 ASSEMBLING AND PREPARING Parts and buttons ENGLISH Remote Control Sensor Standby Light yyLighting On: Turned off yyLighting Off: Turned on Touch buttons on the bottom of the TV COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V 0.5 A 5V 1.0 A Connection panel (See p.16) Touch button Description Scrolls through the saved programmes. Adjusts the volume level. OK Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menus, or saves your input and exits the menus. INPUT Changes the input source. /I Turns the power on or off. NOTE All of the buttons are touch sensitive and can be operated through simple touch with your finger. ASSEMBLING AND PREPARING Lifting and moving the TV CAUTION Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images. It is recommended to move the TV in the yy box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect yy the power cord and all cables. Hold the top and bottom of the TV frame yy firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. When transporting the TV, do not expose the yy TV to jolts or excessive vibration. When transporting the TV, keep the TV yy upright, never turn the TV on its side, or tilt towards the left or right. Do not apply excessive pressure to cause yy flexing /bending of frame chassis as it may damage screen. ENGLISH When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size. When holding the TV, the screen should face yy away from you to prevent the screen from scratches. 9 10 ASSEMBLING AND PREPARING Setting up the TV ENGLISH Attaching the Stand 2 Check the orientation (front and rear) of the stand base and mount the stand base to the stand hinge as shown in the figure. 1 Place the TV with the screen side down on a flat and cushioned surface. 3 Fix two screws into the back of the stand base and close the screw cover. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. When attaching the stand to the TV, yy place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. CAUTION Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. ASSEMBLING AND PREPARING 11 Mounting on a table table. Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. CAUTION Do not place the TV near or on sources of heat, as this may result in fire or other damage. ENGLISH 1 Lift and tilt the TV into its upright position on a 12 ASSEMBLING AND PREPARING WARNING -5 -5 20 20 -5 ENGLISH When you adjust the angle, do not hold the buttom of the TV frame as shown on the following illustration, as may injure your fingers. : CAUTION Tidying cables Disconnect the power cord first, and then move or install the TV. Otherwise electric shock may occur. 1 Attach the cable holder to the stand body securely. 2 Gather and bind the cables with the supplied cable holder. NOTE Tilt from +20 to -5 degrees up or down to adjust the angle of the TV to suit your view. -5 20 CAUTION After attachment, if the cable holder is pulled with excessive force, it may fall off. Front Rear : : ASSEMBLING AND PREPARING Using the Kensington security system Detaching the Stand 1 Place the TV with the screen side down on a flat and cushioned surface. Connect the Kensington security system cable between the TV and a table. CAUTION NOTE Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. When detaching the stand to the TV, yy place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. The Kensington security system is optional. You can obtain additional accessories from most electronics stores. 2 Open the screw cover on the back of the stand base and use a screwdriver to remove the two screws. Detach the stand base from the stand hinge as shown in the figure. ENGLISH The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . 13 14 WATCHING TV WATCHING TV ENGLISH Turning the TV on for the first time When you access the TV for the first time, the initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 Press on the TV or power button on the remote control to turn the TV on. The Standby Light is turned off. 3 The initial setting screen appears if you access the TV for the first time. NOTE If you do not operate the TV within 40 seconds when the setting menu screen appears, the setting menus will disappear. 4 Follow the on-screen instructions to customize your TV according to your preferences. NOTE For those countries without confirmed DTV broadcasting standards, some DTV features might not yy work, depending on the DTV broadcasting environment. To display images in the best quality for your home environment, select Home Use mode. yy Store Demo mode is suitable for the retail environment. yy If you select Store Demo mode, the previously customized settings will switch to the default yy settings of Store Demo mode in 5 minutes. WATCHING TV 15 5 When the basic settings are complete, press OK. If you do not complete the initial setting, it will appear whenever you access the TV. 6 To turn the TV off, press on the TV. The Standby Light is turned on. CAUTION Disconnect the power cord from the power outlet when you do not use the TV for a long period of time. NOTE You can also access Factory Reset by accessing OPTION in the main menus. ENGLISH NOTE 16 MAKING CONNECTIONS MAKING CONNECTIONS ENGLISH Connect various external devices to the TV and switch input modes to select an external device. For more information about an external device’s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, camcorders or cameras, gaming devices, and other external devices. NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input yy cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual supplied with the connected device. The external device connection may differ from the model. yy Connect external devices to the TV regardless of the order of the TV port. yy Connecting an antenna Connect an antenna, cable or cable box to watch TV referring to the following. The illustrations may differ from the actual accessories and an RF cable is optional. Connect the TV to a wall antenna socket with an RF cable (75 Ω). (Not Provided) Outdoor Antenna VHF Antenna yy UHF Antenna yy Wall Antenna Socket NOTE Use a signal splitter to use more than 2 TVs. yy If the image quality is poor, install a signal yy amplifier properly to improve the image quality. If the image quality is poor with an antenna yy connected, aim the antenna to the proper direction. Visit http://AntennaWeb.org for more yy information about the antenna and cable connection. CAUTION Make sure not to bend the copper wire of yy the RF cable. Copper wire Complete all connections instructions yy between devices, and then connect the power cord to the power outlet to prevent damages to your TV. MAKING CONNECTIONS 17 Connecting to a HD receiver, DVD, VCR player or Gaming device HDMI connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown on the following illustration. NOTE Use a High Speed HDMI™ Cable. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yy Supported DTV Audio: MPEG, Dolby Digital. yy Supported HDMI Audio format: DTS, Dolby Digital, PCM (Up to 192 KHz, yy 32k/44.1k/48k/88k/96k/176k/ 192k.) Choose any HDMI input port to connect. yy It does not matter which port you use. yy DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device (Not Provided) COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V 0.5 A 5V 1.0 A ENGLISH Connect a HD receiver, DVD, VCR player or Gaming device to the TV and select an appropriate input mode. 18 MAKING CONNECTIONS HDMI to DVI connection ENGLISH Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the HDMI to DVI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. NOTE If you do not use an optional external speaker, connect the external device to the TV with the optional audio cable. DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device (Not Provided) COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V 0.5 A 5V 1.0 A MAKING CONNECTIONS 19 Component connection NOTE If cables are installed incorrectly, it could case the image to display in black and white or with distorted yy color. Check to ensure the cable are matched with the corresponding color connection. yy COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V (Use the component video cable provided.) 0.5 A 5V 1.0 A (Use the composite audio/video cable provided.) (Not Provided) (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device ENGLISH Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable. 20 MAKING CONNECTIONS Composite connection ENGLISH Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown on the following illustration. NOTE Check to ensure the cable are matched with the corresponding color connection. COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V 0.5 A 5V 1.0 A (Use the composite audio/video cable provided.) (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device MAKING CONNECTIONS 21 Headphone connection NOTE AUDIO menu items are disabled when connecting a headphone. yy When changing AV MODE with a headphone connected, the change is applied to video but not to yy audio. Headphone impedance: 16 yy Max audio output of headphone: 9 mW to 15 mW yy Headphone jack size: 0.35 cm yy COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V (Not Provided) Headphone 0.5 A 5V 1.0 A ENGLISH Transmits the headphone signal from the TV to an external device. Connect the TV with the headphone as shown on the following illustration. 22 MAKING CONNECTIONS Connecting to a USB ENGLISH Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the TV and access the USB menu to use various multimedia files. NOTE Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect yy it to the USB port on the TV directly. Connect the external power source if your USB is needed. yy COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V USB 0.5 A or 5V or (Not Provided) 1.0 A MAKING CONNECTIONS 23 MHL connection NOTE Connect the mobile phone to the HDMI IN 1(MHL) port to view the phone screen on the TV. yy The MHL passive cable is needed to connect the TV and a mobile phone. yy This only works for the MHL-enabled phone. yy Some applications can be operated by the remote control. yy For some mobile phones supporting MHL, you can control with the magic remote control. yy Remove the MHL passive cable from the TV when: yy - the MHL function is disabled - your mobile device is fully charged instandby mode COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V 0.5 A 5V 1.0 A Mobile phone ENGLISH Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. 24 MAKING CONNECTIONS Connecting to a PC ENGLISH Your TV supports the Plug & Play* feature and has the built-in speakers with Virtual Surround that reproduces sound clearly with a rich bass. * Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. NOTE It is recommended to use the TV with the HDMI connection for the best image quality. yy If you do not use an optional external speaker, connect the PC to the TV with the optional audio yy cable. If you turn the TV on when the set becomes cold, the screen may flicker. This is normal. yy Some red, green, or blue spots may appear on the screen. This is normal. yy Do not press the screen with your finger for a long time as this may result in temporary distortion on yy the screen. Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a yy screensaver if possible. If you want to use HDMI-PC mode, you must set the input label to PC mode. yy MAKING CONNECTIONS 25 HDMI connection NOTE Use a High Speed HDMI™ Cable. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yy If you want to use HDMI-PC mode, you must set the input label to PC mode. yy Supported DTV Audio: MPEG, Dolby Digital. yy Supported HDMI Audio format: DTS, Dolby Digital, PCM (Up to 192 KHz, yy 32k/44.1k/48k/88k/96k/176k/ 192k.) Choose any HDMI input port to connect. yy It does not matter which port you use. yy PC (Not Provided) COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V 0.5 A 5V 1.0 A ENGLISH Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the TV with an HDMI connection. 26 MAKING CONNECTIONS HDMI to DVI connection ENGLISH Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the HDMI to DVI cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable. NOTE If you want to use HDMI-PC mode, you must set the input label to PC mode. yy If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. yy PC (Not Provided) COMPONENT IN AUDIO IN(PC) HP (19 V ) AV IN / AUDIO L R HDMI IN 5V 0.5 A 5V 1.0 A REMOTE CONTROL 27 REMOTE CONTROL CAUTION Do not mix old and new batteries, as this may damage the remote control. Make sure to point the remote control to the remote control sensor on the TV. Image shown may differ from your TV. (POWER) Turns the TV on or off. Q.MENU Accesses the quick menus. TV/RAD Selects Radio, TV and DTV programme. INPUT Selects the input mode. SUBTITLE 2.&/6 */'0 GUIDE Shows programme guide. INFO Views the information of the currently program and the screen. Number buttons Enters numbers. Q.VIEW Returns to the previously viewed programme. LIST Displays the programme table. + - Adjusts the volume level. PAGE P Selects a programme. PAGE Moves to the previous or next screen. FAV Displays the selected favourite programme. 3D Uses for viewing 3D video. MUTE Mutes all sounds. ENGLISH The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. 28 REMOTE CONTROL ENGLISH SMART Accesses the HOME menu. Navigation buttons Scrolls through menus or options. OK Selects menus or options and confirms your input. Teletext buttons These buttons are used for teletext. APP/* Select the MHP TV menu source. (Only Italy) (Depending on model) "11 MY APPS 4."35 BACK Returns to the previous level. -*7&57 MY APPS Shows the list of Apps. EXIT Clears all on-screen displays and return to TV viewing. 3&$ SETTINGS Accesses the main menus. REC Start to record and display record menu. Coloured buttons These access special functions in some menus. Control buttons Controls the SIMPLINK compatible devices (USB, SIMPLINK). MAGIC REMOTE CONTROL FUNCTIONS 29 MAGIC REMOTE CONTROL FUNCTIONS CAUTION Do not mix old and new batteries, as this may damage the remote control. Pointer (RF transmitter) (POWER) Turns the TV on or off. Navigation buttons (up/down/left/ right) Scrolls through menus or options. BACK Returns to the previous level. BACK Wheel(OK) Selects menus or options and confirms your input. Scrolls through the saved programmes. If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic Remote Control works as a regular remote control. To display the pointer again, shake the Magic Remote Control from side to side. SMART SMART Accesses the Smart Home menus. /Q.MENU P /Q.MENU Accesses the quick menus. Accesses the Universal Control. + Adjusts the volume level. ꕌPꕍ Scrolls through the saved programmes or channels. MUTE Mutes all sounds. 3D Used for viewing 3D video. 3 Voice recognition 1 If you press Wheel(OK) on the Magic Remote Control, the following screen appears. Shows information about the current programmes and screen. 2 Pressing this button will display number keypad which you can select programme number. 3 You can select My Apps Menu. ENGLISH When the message “Magic Remote Control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. 30 MAGIC REMOTE CONTROL FUNCTIONS ENGLISH Registering Magic Remote Control It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work. How the Magic Remote Control BACK to register HOME P MY APPS 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen. 2If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration. How to re-register the Magic Remote Control BACK SMART 1 Press and hold the BACK and SMART buttons together for 5 seconds to reset, then register it by following “How to register the Magic Remote Control” above. 2To re-register the Magic Remote Control, press and hold the BACK button for 5 seconds toward the TV. When registration is completed, the completion message appears on the screen. How to use Magic Remote Control 1 If the pointer disappears, move the Magic Remote Control slightly to left or right. Then, it will automatically appear on the screen. »» If the pointer has not been used for a certain period of time, it will disappear. 2You can move the pointer by aiming the Pointer Receiver of the Magic Remote Control at your TV then move it left, right, up or down. »» If the pointer does not work properly, leave the Magic Remote Control for 10 seconds then use it again. Precautions to Take when Using the Magic Remote Control Use the Magic Remote Control within the yy maximum communication distance (10 m). Using the Magic Remote Control beyond this distance, or with an object obstructing it, may cause a communication failure. A communication failure may occur due to yy nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic Remote Control. The Magic Remote Control may be damaged yy or may malfunction if it is dropped or receives a heavy impact. Take care not to bump into nearby furniture yy or other people when using the Magic Remote Control. Manufacturer and installer cannot provide yy service related to human safety as the applicable wireless device has possibility of electric wave interference. It is recommended that an Access Point (AP) yy be located more than 1 m away from the TV. If the AP is installed closer than 1 m, the Magic Remote Control may not perform as expected due to frequency interference. USING THE USER GUIDE 31 USING THE USER GUIDE ENGLISH User Guide allows you to more easily access the detailed TV information. 1 Press the SMART Image shown may differ from your TV. yy button to access the Smart Home menu. 2 Select User Guide and press Wheel(OK). OPTION > To set language 1 SMART Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Selects a language for the display text. [In Digital Mode Only] Audio Language When watching a digital broadcast containing several audio languages, you can select the language you want. [In Digital mode Only] Use the Subtitle function when two or more subtitle Subtitle languages are broadcast. Language ✎ If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed. Try Now 2 Close User Guide Shows the description of the selected menu. You can use to move between pages. 2 Moves to the selected menu directly from the User Guide. 1 User Guide User Guide Check with your remote control right now. 3 1 To use input device To set time options PROGRAMME Setting To set TV lock options PICTURE, SOUND Setting To set language OPTION To set country LG SMART Function Disabled Assisstance Advanced Function Information 2 To set Magic remote control Index 4 Online User Guide 5 1 Shows the current watching programme or input source screen. 2 Allows to select the category you want. 3 Allows to select the item you want. You can use ꕌ/ꕍto move between pages. 4 Allows to browse the description of the function you want from the index. 5 Provides the detailed information on the functions of LG Smart TV when the Internet is connected. (It may not be available depending on the country/language.) 32 MAINTENANCE MAINTENANCE ENGLISH Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall yy outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust, wipe the surface with a dry and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a clean and dry cloth. CAUTION Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in yy scratches on the screen and image distortions. Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, yy lubricants, as these may damage the screen’s finish and cause discolorations. Cabinet and stand To remove dust, wipe the cabinet with a dry and soft cloth. To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a small amount of mild detergent. CAUTION Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or yy malfunction. Do not use any chemicals as this may deteriorate the surface. yy Power cord Remove the accumulated dust or dirt on the power cord regularly. MAINTENANCE 33 Preventing “Image burn” or “Burn-in” on your TV screen ENGLISH If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become yy a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the yy letterboxed area of the screen. Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD) yy to prevent image burn. 34 IF THE QUALITY OF THE 3D IMAGE IS NOT ACCEPTABLE, CHECK THE FOLLOWING ENGLISH IF THE QUALITY OF THE 3D IMAGE IS NOT ACCEPTABLE, CHECK THE FOLLOWING 1) Viewing distance For optimal 3D viewing distance, please see the table below. Please maintain the optimal viewing distance for the best 3D experience. 2) Viewing angle For optimal 3D viewing angles, see the table below. 3) Check the 3D display sequence (L-R, R-L) The display method may vary due to the 3D content type. Try changing the display method to L-R or R-L for a better viewing experience Remain at the optimal viewing distance from the Cinema 3D TV. Adjust the Cinema 3D TV angle and your position to achieve the optimal viewing angle. Adjust the position of the screen to minimise reflections. Keep your lower arms horizontal and gently rest your hands on the keyboard. Model Mode Dimension Monitor's allowed 3D viewing distance 27MT93D When viewing 3D images 69.0 cm 55 cm to 500 cm Monitor's optimal 3D viewing distance Optimal viewing angle 100 cm 12 ° VIEWING 3D IMAGING 35 VIEWING 3D IMAGING Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Viewing Age yy Infants/Children -- Usage/ Viewing 3D contents for children under the age of 5 are prohibited. -- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents. - Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image. y Teenagers y -- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired. y Elderly y -- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents. yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc. yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced. yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. yy If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents. Symptoms which require discontinuation or refraining from watching 3D contents yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides. -- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue. ENGLISH WARNING 36 VIEWING 3D IMAGING CAUTION ENGLISH Viewing Environment yy Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Cautions when using the 3D glasses yy Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. yy Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. yy Using modified 3D glasses may cause eye strain or image distortion. yy Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation. yy The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals. TROUBLESHOOTING 37 TROUBLESHOOTING ENGLISH General Problem Resolution Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet. yy Check if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly. yy Check the power control settings. The power supply may be interrupted. yy Check if the Auto sleep feature is activated in the Time settings. yy If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. Using 3D mode Problem Resolution If you can see a swirling oil-like pattern on the TV when the TV is turned off. This is caused by the interference of external light in the air layer between the LCD surface and 3D filter. The pattern becomes almost invisible when you turn on the power again. If you are not using the glasses provided with the TV. When you view 3D images with this TV, it is very important that you use the glasses provided with the TV. The glasses are designed to compensate optically for the 3D filter attached to the surface of the TV. If you wear third-party glasses, you may not see 3D images properly on the TV. If you view 3D images outside the optimal viewing angle or distance. When you view 3D images outside the optimal viewing angle or viewing distance, the images may look overlapped or not be displayed properly in 3D. Notes for Viewing 3D Image with 3D Digital Brodcating *In Analogue Brodcating, 3D Imaging does not work. Problem When switching the 2D image display to the 3D image display with the 3D button on the remote control, the overlapped image may be displayed. Resolution Disable the 3D imaging mode with the 3D button. If the screen is divided into left/right This channel supports the 3D imaging mode. Select the 3D imaging type or top/bottom when you change the displayed on the screen by pressing the 3D button on the remote control. channel If your eyes are sore or the screen looks blurry while viewing 3D images. Select Left/Right or Right/Left option, which you find better for viewing 3D images. 38 SPECIFICATIONS SPECIFICATIONS ENGLISH Product specifications may be changed without prior notice due to upgrade of product functions. Wireless LAN module(TWFM-B006D) specification Standard IEEE802.11a/b/g/n 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz Modulation CCK / OFDM / MIMO 802.11a: 11 dBm Output Power (Typical) 802.11b: 15 dBm 802.11g: 13 dBm 802.11n - 2.4GHz: 13 dBm 802.11n - 5GHz: 13 dBm 802.11a/g: 54 Mbps Data rate 802.11b: 11 Mbps 802.11n: 300 Mbps Antenna Gain (Typical) Occupied bandwidth 2400 to 2483.5 MHz: 2.5dBi 5150 to 5250 MHz: 2.2dBi 5725 to 5850 MHz: 2.9dBi 802.11a/b/g: HT20 802.11n: HT20/40 yy Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. Bluetooth module (BM-LDS401) specification Standard Bluetooth Version 3.0 Frequency Range 2400 ~ 2483.5 MHz Output Power (Max.) Data rate (Max.) Communication Distance 10 dBm or lower 3 Mbps Line of Open Sight approx. 10 m SPECIFICATIONS Australia Television System Programme Coverage Television System Programme Coverage Indonesia, Israel, Myanmar, Sri Lanka Television System Programme Coverage Vietnam, Malaysia Television System Programme Coverage Iran, Algeria, Tunisia, Digital model Television System Analogue model, India, Thailand, South Africa, -- Television System Programme Coverage Programme Coverage Digital TV Analogue TV DVB-T PAL/SECAM-B/G/D/K, PAL-I UHF 21 to 69 BG : VHF/UHF 1 to 69, CATV 01 to 47 I : VHF/UHF 1 to 69, CATV 01 to 47 DK : VHF/UHF 1 to 69, CATV 01 to 47 DVB-T PAL B/B VHF 06 to 12 UHF 27 to 69 B/B : VHF/UHF 0 to 75, CATV : 2 to 44 DVB-T PAL/SECAM-B/G/D/K, PAL-I, NTSC-M UHF 21 to 69 BG : VHF/UHF 1 to 69, CATV 01 to 47 I : VHF/UHF 1 to 69, CATV 01 to 47 DK : VHF/UHF 1 to 69, CATV 01 to 47 M : VHF/UHF 2 to 78, CATV 01 to 71 DVB-T PAL/SECAM-B/G/D/K, PAL-I, NTSC-M VHF 06 to 12 UHF 21 to 69 BG : VHF/UHF 1 to 69, CATV 01 to 47 I : VHF/UHF 1 to 69, CATV 01 to 47 DK : VHF/UHF 1 to 69, CATV 01 to 47 M : VHF/UHF 2 to 78, CATV 01 to 71 DVB-T PAL/SECAM-B/G/D/K, PAL-I, NTSC-M VHF 05 to 12 UHF 21 to 69 BG : VHF/UHF 1 to 69, CATV 01 to 47 I : VHF/UHF 1 to 69, CATV 01 to 47 DK : VHF/UHF 1 to 69, CATV 01 to 47 M : VHF/UHF 2 to 78, CATV 01 to 71 - PAL/SECAM-B/G/D/K, PAL-I, NTSC-M - BG : VHF/UHF 1 to 69, CATV 01 to 47 I : VHF/UHF 1 to 69, CATV 01 to 47 DK : VHF/UHF 1 to 69, CATV 01 to 47 M : VHF/UHF 2 to 78, CATV 01 to 71 ENGLISH New Zealand, Singapore 39 40 SPECIFICATIONS ENGLISH Panel Video Signal Screen Type 690 mm Wide (27 inch) Visible diagonal size : 690 mm Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V) Max. Resolution 1920 × 1080 @ 60 Hz Recommended Resolution 1920 × 1080 @ 60 Hz Horizontal Frequency 30 kHz to 83 kHz Vertical Frequency 58 Hz to 62 Hz Synchronization Type Digital Input Connector Power TV, PC Audio In, Component, CVBS, HDMI*2, USB*3, LAN JACK Rated Voltage 19 V Power Consumption On Mode : 38 W (typ.) Off Mode 0.5 W AC/DC Adapter Tilt 3.2 A Manufacturer: LG Innotek, Model PSAB-L206A Tilt Range Dimensions (Width x Depth x Height) Weight -5 to 20° With Stand 622.1 mm x 208.4 mm x 437.8 mm 5.2 kg Without Stand 622.1 mm x 66.8 mm x 373.7 mm 4.7 kg Environmental conditions Operating Temperature Operating Humidity 10 °C to 35 °C 20 % to 80 % Storage Temperature Storage Humidity -10 °C to 60 °C 5 % to 90 % Product specifications shown above may be changed without prior notice due to upgrade of product functions. 41 SPECIFICATIONS Component port connecting information HDMI (PC) supported mode Horizontal Frequency(kHz) Vertical Frequency(Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 Y PB PR Y B-Y R-Y Y Cb Cr Y Pb Pr Video output ports on DVD player 640 x 480 31.469 59.94 800 x 600 37.879 60.31 1024 x 768 48.363 60.00 1152 x 864 54.348 60.053 1360 x 768 47.712 60.015 1280 x 1024 63.981 60.020 1920 x 1080 67.500 60.00 HDMI (DTV) supported mode Horizontal Frequency(kHz) Vertical Frequency(Hz) 640 x 480 31.469 / 31.5 59.94 / 60 720 x 480 31.469 / 31.5 59.94 / 60 720 x 576 31.25 15.625 50 50 1280 x 720 37.500 44.96 / 45 50 59.94 / 60 1920 x 1080 33.72 / 33.75 28.125 26.97 / 27 33.716 / 33.75 56.250 67.43 / 67.5 59.94 / 60 25/50.00 23.97 / 24 29.976 / 30.00 50 59.94 / 60 Resolution Component ports on the TV Y PB Signal Component 480i/576i O 480p/576p O 720p/1080i O 1080p O (50 Hz / 60 Hz only) PR ENGLISH Resolution 42 SPECIFICATIONS NOTE ENGLISH Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may yy become permanently imprinted on the screen. Use a screen saver when possible. There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. yy Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. The synchronization input waveform for Horizontal and Vertical frequencies are separate. yy Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included yy with the TV). If using a sound card, adjust PC sound as required. yy DOS mode may not work depending on the video card if you use an HDMI to DVI cable. yy SPECIFICATIONS 43 3D supported mode The method for 3D digital broadcast may differ depending on the signal environment. If video is not yy switched automatically into 3D, manually convert the settings to view 3D images. 3D supported mode automatically Input Signal 640 X 480 480p 576p 720p HDMI 1080i 1080p Horizontal Vertical Frequency (kHz) Frequency (Hz) Top & Bottom, Side by Side(Half), Side by Side(Full) 31.469 / 31.5 62.938 / 63 31.469 / 31.5 59.94 / 60 62.5 50 37.50 50 44.96 / 45 59.94 / 60 75 50 89.91 / 90 59.94 / 60 28.125 50 33.72 / 33.75 59.94 / 60 56.25 50 67.5 59.94 / 60 26.97 / 27 23.97 / 24 28.125 25 33.72 / 33.75 29.976 / 30 43.94 / 54 23.97 / 24 56.25 25 67.432 / 67.5 29.976 / 30 56.25 50 67.432 / 67.5 59.94 / 60 USB 1080p 33.75 30 DLNA 1080p 33.75 30 DTV Frame Packing, Line Alternative Top & Bottom, Side by Side(Half), Side by Side(Full) Frame Packing, Line Alternative 62.938 / 63 31.25 Playable 3D video format Top & Bottom, Side by Side(Half), Side by Side(Full) Frame Packing, Line Alternative Top & Bottom, Side by Side(Half), Side by Side(Full) Frame Packing, Line Alternative Top & Bottom, Side by Side(Half), Side by Side(Full) Frame Packing, Field Alternative Top & Bottom, Side by Side(Half), Side by Side(Full) Frame Packing, Line Alternative Top & Bottom, Side by Side(Half) Side by Side(Half), Top & Bottom, Checker Board, MPO(Photo), JPS(Photo) Signal Playable 3D video format Frame Compatible Side by Side(Half), Top & Bottom ENGLISH Video, which is input as below media contents is switched into the 3D screen automatically. yy 44 SPECIFICATIONS 3D supported mode manually ENGLISH Signal Input Resolution Horizontal Frequency (kHz) Verticla Frequency (Hz) Playable 3D video format DTV HD / SD - - ATV(CVBS) SD - - Component HD / SD - - 1024X768 48.36 2D to 3D, Side by Side(Half), Top & Bottom 1360X768 47.71 60 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Frame Sequential, Row Interleaving, Column Interleaving HDMI-PC 1920X1080 67.5 Others - - 480P 31.5 60 576P 31.25 50 37.5 50 45 60 28.12 50 33.75 60 27 24 28.12 25 33.75 30 56.25 50 67.5 60 - - 2D to 3D 720p 1080i HDMI-DTV 1080p Under 704x480 USB ,DLNA (Movie) USB, DLNA (Photo) Miracast/Widi 2D to 3D, Side by Side(Half), Top & Bottom 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Frame Sequential, Row Interleaving, Column Interleaving 2D to 3D, Side by Sied(Half), Top & Bottom 2D to 3D, Side by Side(Half), Top & Bottom,Checker Board, Row Interleaving, Column Interleaving 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Frame Sequential, Row Interleaving, Column Interleaving Over 704x480 interlaced - - 2D to 3D, Side by Side(Half), Top & Bottom Over 704x480 progressive - 50 / 60 2D to 3D, Side by Side(Half), Top & Bottom,Checker Board, Row Interleaving, Column Interleaving, Frame Sequential 2D to 3D, Side by Side(Half), Top & Bottom,Checker Board, Row Interleaving, Column Interleaving Over 704x480 progressive - others Under 320x240 - - 2D to 3D 2D to 3D, Side by Side(Half), Top & Bottom Over 320x240 - - 1024X768p - 30 / 60 1280x720p - 30 / 60 1920X1080p - 30 / 60 Others - - 2D to 3D, Side by Side(Half), Top & Bottom 2D to 3D Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to firstname.lastname@example.org. This offer is valid for three (3) years from the date on which you purchased the product.