LG | 29EA93-P | LG 29EA93 Owner’s Manual

ENGLISH
Owner's Manual
IPS LED MONITOR
(LED LCD MONITOR)
Please read the safety information carefully before using the
product.
IPS LED Monitor (LED LCD Monitor) Model List
29EA93
29EB93
www.lg.com
2
ENGLISH
ENG
3
Contents
LICENSE
4
ASSEMBLING AND
PREPARING
4
Product Components
5
Component and Button Description
7
Moving and Lifting the Monitor
7
Installing the Monitor
7
- Assembling the stand base
9
- Detaching the stand base
11
- Installing onto a table
12
- Adjusting the stand height
13
- Adjusting the angle
14
- Tidying cables
15
- Using the Kensington lock
15
- Installing the wall mount plate
16
- Installing to a wall
27
CUSTOMIZING SETTINGS
27
Activating the Main Menu
28
Customizing settings
28
- Menu Settings
29
- Ratio Settings
30
- Func. Settings
31
- PIP settings
32
- Picture
33
- Color
34
- Settings
35
TROUBLESHOOTING
37
SPECIFICATIONS
38
Factory support mode
(Preset Mode, DVI-D/HDMI/PC Display
Port)
17
USING THE MONITOR
17
Connecting to a PC
17
- DVI connection
18
- Display port connection
19
- HDMI connection
20
Connecting to AV Devices
20
- HDMI connection
21
Connecting to External Devices
21
- Smartphone (MHL) connection
22
- USB cable-PC connection
23
- Headphone port connection
24
INSTALLING LG MONITOR
SOFTWARE
38
HDMI/MHL Timing (Video)
38
Power Indicator
39
PROPER POSTURE
39
Proper Posture for Using the Monitor
LICENSE
3
LICENSE
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
VESA, VESA logo, Display Port Compliance Logo and Display Port
Compliance Logo for dual-mode source are all registered trademarks of the
Video Electronics Standards Association.
ENG
ENGLISH
Each model has different licenses. Visit www.lg.com for more information on the license.
4
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
ENGLISH
ENG
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
User Manual/Card
Power Cord
AC/DC Adapter
DVI-D Dual Cable
or
MHL Signal Cable
Audio Cable
29EA93
29EB93
Cable Tie
Stand Base
Two Screws
A-B Type USB 3.0 Cable
Screw Cover
Stand Base
Stand Body
CAUTION
Always use genuine components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
Note that the components may look different from those shown here.
Without prior notice, all information and specifications in this manual are subject to change to improve the performance of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the
retail store where you purchased the product.
ASSEMBLING AND PREPARING
5
Component and Button Description
ENG
ENGLISH
29EA93
Power Indicator
On: power is on
Off: power is off
(Power Button)
Touch buttons on the bottom
of the monitor
DC-IN (19.5 V
)
USB UP
AUDIO IN(PC)
USB IN 1
USB IN 2
5V
H/P
DP IN
HDMI 1
USB IN 3
HDMI 2/MHL
5V
0.9 A
DVI-D IN
Ports
0.9 A
6
ASSEMBLING AND PREPARING
29EB93
ENGLISH
ENG
Power Indicator
On: power is on
Off: power is off
(Power Button)
Touch buttons on the bottom
of the monitor
USB UP
USB IN 1
DC-IN (19.5 V
USB IN 3
H/P
0.9 A
HDMI 2/MHL
5V
USB IN 2
)
5V
HDMI 1
DP IN
AUDIO IN(PC)
DVI-D IN
Ports
0.9 A
ASSEMBLING AND PREPARING
Installing the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation regardless of its shape or size.
Assembling the stand base
29EA93
1 Place the screen face down.
CAUTION
As far as possible, avoid touching the monitor screen. This may result in damage to the
screen or some of the pixels used to create
images.
CAUTION
To protect the screen from scratches, cover
the surface with a soft cloth.
2 Check the orientation (front and rear) of the
It is advisable to place the monitor in the
original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the power cord and all cables.
Hold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
stand base and mount the stand base to the
stand hinge as shown in the figure.
Stand Hinge
When holding the monitor, the screen should
face away from you to prevent it being
scratched.
Stand Base
3 Fix two screws into the back of the stand base
and close the screw cover.
When moving the monitor, avoid any strong
shock or vibrations to the product.
When moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
Stand Base
ENG
ENGLISH
Moving and Lifting the Monitor
7
8
ASSEMBLING AND PREPARING
3 Insert the stand base into the hook of the
29EB93
ENGLISH
ENG
stand body.
1 Place the screen face down.
CAUTION
To protect the screen from scratches, cover
the surface with a soft cloth.
Stand Base
2 Put the stand body on the monitor aligning
with holes for fixing screws and fix two screws
to the holes to assemble the stand body and
the monitor together.
Stand Body
Stand Body
4 Fix by turning the screw to the right with a coin.
ASSEMBLING AND PREPARING
Detaching the stand base
1 Place the screen face down.
CAUTION
To protect the screen from scratches, cover
the surface with a soft cloth.
2 Open the screw cover on the back of the stand
base and use a screwdriver to remove the two
screws.
Detach the stand base from the stand hinge
as shown in the figure.
Stand Hinge
Stand Base
CAUTION
The components in the illustrations may differ from the actual product.
Do not carry the monitor upside down, as this
may cause it to fall off its stand and result in
damage or injury.
To avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnecessary pressure on the screen.
ENG
ENGLISH
29EA93
9
10
ASSEMBLING AND PREPARING
3 Remove the two screws from the stand body.
29EB93
ENGLISH
ENG
1 Place the screen face down.
Stand Body
CAUTION
To protect the screen from scratches, cover
the surface with a soft cloth.
2
1 Turn the screw to the left using a coin.
2 Detach the stand base.
Stand Body
CAUTION
The components in the illustrations may differ from the actual product.
Do not carry the monitor upside down, as this
may cause it to fall off its stand and result in
damage or injury.
To avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnecessary pressure on the screen.
Stand Base
ASSEMBLING AND PREPARING
11
2 Connect the adapter to the monitor, then plug
Installing onto a table
1 Lift the monitor and place it on the table in an
upright position.
29EA93
Place at least 10 cm away from the wall to
ensure sufficient ventilation.
29EA93
10 cm
10 cm
10 cm
10 cm
29EB93
29EB93
3 Press the
10 cm
10 cm
10 cm
10 cm
(Power) button on the bottom of
the monitor to turn it on.
CAUTION
Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
ENG
ENGLISH
the power cord into the power outlet.
12
ASSEMBLING AND PREPARING
Adjusting the stand height
4 The height can be adjusted up to 110.0 mm.
ENGLISH
ENG
110.0 mm
29EB93
1 Place the monitor mounted on the stand base
in an upright position.
2 Remove the tape attached at the bottom rear
of the stand body, then pull out the locking
pin.
CAUTION
Stand Body
Once the pin is removed, it is not necessary
to re-insert it to adjust the height.
Tape
Locking Pin
3 Push the Head downward and pull out the
Locking Pin.
Head
Locking pin
WARNING
Do not put your fingers or
hand between the screen
and the base (chassis) when
adjusting the screen's height.
ASSEMBLING AND PREPARING
Adjusting the angle
13
WARNING
ed on the stand base.
2 Adjust the angle of the screen. The angle of
the screen can be adjusted forwards or backwards from -5° to 20° for a comfortable viewing
experience.
To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
29EA93
29EA93
20
-5
Rear Side
Front Side
29EB93
29EB93
20
-5
Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
29EA93
Rear Side
Front Side
NOTE
29EB93
As shown in the picture, be careful not to
let the USB bump into the stand when you
adjust the monitor's angle with the USB
inserted.
ENG
ENGLISH
1 Place the monitor in an upright position, mount-
14
ASSEMBLING AND PREPARING
Tidying cables
ENGLISH
ENG
Gather and bind the cables with the supplied cable tie.
29EA93
29EB93
ASSEMBLING AND PREPARING
15
Installing the wall mount plate
The connector for the Kensington lock is located at
the rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.
This monitor supports the specification of the standard wall mount plate or compatible device.
Connect the monitor to the table with the Kensington lock cable.
29EA93
1 Place the screen face down. To protect the
screen from scratches, cover the surface with a
soft cloth.
2 Place the wall mount plate onto the monitor
and align it with the screw holes.
3 Using a screwdriver, tighten the four screws to
fix the plate onto the monitor.
Wall Mount Plate
29EB93
NOTE
The wall mount plate is sold separately.
For more information on installation, refer to
the wall mount plate's installation guide.
Be careful not to use excessive force when
mounting the wall mount plate, as this can
damage the monitor's screen.
NOTE
Use of the Kensington lock is optional. The
accessories can be purchased at your local
electronics store.
ENG
ENGLISH
Using the Kensington lock
16
ASSEMBLING AND PREPARING
Installing to a wall
ENGLISH
ENG
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
VESA (A x B)
Stand Screw
Required Screws
Wall Mount Plate
(Optional)
100 x 100
M4
4
RW120
10 cm
CAUTION
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely
fixed to the monitor and to the wall.
1 Use the screws and wall mounting bracket that
comply with the VESA standard.
2 Screws which are longer than the standard
length may damage the inside of the monitor.
3 A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to
the use of non-standard screws.
4 The monitor is VESA standard compliant.
5 Use it according to the VESA standard as specified below.
784.8 mm or less
* Thickness of the wall mount plate: 2.6 mm
* Fastening screw: Diameter 4.0 mm x Pitch 0.7
mm x Length 10 mm
787.4 mm or greater
* Use the wall mount plate and screws that conform to the VESA standard.
Unplug the power cord before moving or installing the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling
off, which could lead to injury. Please use
the genuine LG wall mounting bracket. For
more information, contact your local retail
store or a qualified installer.
Applying excessive force when fastening
screws may cause damage to the monitor. Damage caused in this way will not be
covered by the product warranty.
Use the wall mounting bracket and screws
that conform to the VESA standard. Damage caused by the use or misuse of inappropriate components will not be covered
by the product warranty.
NOTE
Use the screws specified by the VESA standard.
The wall mount kit includes the installation
guide and all necessary parts.
The wall mounting bracket is optional. The
accessories can be purchased at your local
retail store.
The length of the screw may differ for each
wall mounting bracket. Ensure the correct
length screw is used.
For more information, please refer to the
user manual for the wall mounting bracket.
5V
USING THE MONITOR
USING THE MONITOR
17
29EB93
Connecting to a PC
5V
0.9 A
AUDIO IN(PC)
HDMI 1
DP IN
DVI-D IN
DVI connection
Transmits digital video signals to the monitor. Connect the monitor using the DVI cable as illustrated
below.
Press the menu ( ) button and then select the
input option from the input menu.
To hear the sound in DVI input mode, connect the
PC's AUDIO OUT port to the monitor's AUDIO IN
(PC) port using the audio cable that came with the
product.
29EA93
UP
AUDIO IN(PC)
N1
USB IN 2
5V
0.9
09A
H/P
HDMI 1
DP IN
USB IN 3
AUDIO OUT
PC
DVI-I(D) OUT
PC
CAUTION
Connect the input signal cable and
turn in the direction of the arrow.
To prevent disconnection secure
the cable tightly.
Do not press on the screen for a
prolonged period of time. This may cause
image distortion.
Do not display a still image on the screen
for a prolonged period of time. This may
cause image retention. If possible, use the
screen saver.
DVI-D IN
NOTE
AUDIO OUT
DVI-I(D) OUT
PC
PC
When connecting the power cord to the outlet, use a grounded (3-hole) multi-socket or a
grounded power outlet.
The monitor may flicker when turned on in an
area of low temperature. This is normal.
Sometimes red, green, or blue spots may appear on the screen. This is normal.
Using a DVI to HDMI cable may cause compatibility issues.
H
ENG
ENGLISH
H/P
This monitor supports the *Plug and Play
feature.
*Plug and Play: A feature that allows you to
add a device to your computer without having
to reconfigure anything or install any manual
drivers.
0.9 A
18
USING THE MONITOR
Display port connection
29EB93
ENGLISH
ENG
Transmits the digital video and audio signals from
your PC to the monitor. Connect your PC to the
monitor using the display port cable as illustrated
below.
Press the menu ( ) button and then select the
input option from the input menu.
DP OUT
29EA93
(sold separately)
DP OUT
HDMI 1
HDMI 2 / MHL
5V
0.9 A
5
(sold separately)
H/P
H
DP IN
DP IN
AUDIO IN(PC)
DVI-D IN
HDMI 1
NOTE
USB IN 3
Sound may not be available depending on
the DP version of your PC.
DVI-D IN
P
USB UP
5V
0.9 A
USING THE MONITOR
HDMI connection
29EB93
ENG
ENGLISH
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable as illustrated below.
Press the menu ( ) button and then select the
input option from the input menu.
29EA93
(sold separately)
HDMI 2 / MHL
5V
H/P
DP IN
DP IN
HDMI 1
HDMI 2 / MHL
5V
0.9 A
HDMI 1
USB IN 3
HDMI 2/MHL
5V
DVI-D IN
0.9 A
AUDIO IN(PC)
(sold separately)
H/P
19
0.9 A
NOTE
HDMI PC may cause device compatibility
issues.
Using a DVI to HDMI cable may cause compatibility issues.
DVI-D IN
H/P
USING THE MONITOR
Connecting to AV Devices
ENGLISH
ENG
(PC)
20
29EB93
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable as illustrated below.
Press the menu ( ) button and then select the
input option from the input menu.
(sold separately)
29EA93
HDMI 2 / MHL
5V
H/P
DP IN
HDMI 1
HDMI 2 / MHL
5V
0.9 A
0.9 A
AUDIO IN(PC)
(sold separately)
NOTE
H/P
DP IN
HDMI 1
USB IN 3
HDMI 2/MHL
5V
DVI-D IN
DVI-D IN
Using a DVI to HDMI cable may cause compatibility issues.
0.9 A
H/P
USING THE MONITOR
Connecting to External Devices
29EB93
ENG
ENGLISH
Smartphone (MHL) connection
Mobile High-definition Link (MHL) is an interface that allows you to play video and audio from
your smartphone on the monitor by connecting the
monitor to your smartphone. Connect the smartphone to the HDMI2/MHL port of the monitor using
the supplied MHL signal cable and switch the
input by pressing the input button on the monitor.
29EA93
H/P
DP IN
HDMI 1
HDMI 2 / MHL
5V
0.9 A
AUDIO IN(PC)
NOTE
DP IN
HDMI 1
HDMI 2/MHL
5V
DVI-D IN
0.9 A
21
This function only works for smartphones
that support MHL.
- There may be compatibility issues with
other
mobile phones.
DVI-D IN
AUDIO
IN(PC)
22
USING THE MONITOR
USB cable-PC connection
29EB93
ENGLISH
ENG
The USB 3.0 function acts as a USB hub on the
product.
To use USB 3.0, connect the A-B type USB 3.0
cable included with the product to the PC.
Peripheral devices
connected to the USB IN port
H/P
can be controlled from the PC.
29EA93
USB UP
USB IN 1
5V
USB UP
AUDIO IN(PC)
USB IN 1
USB IN 2
5V
USB IN 3
USB IN 2
0.9 A
AUDIO IN(PC)
(sold separately)
H/P
USB IN 3
NOTE
0.9 A
(sold separately)
Please install the latest Windows service
pack before use.
Peripheral devices are sold separately.
The USB ports can be used to connect the
keyboard, mouse, and other USB devices.
CAUTION
<Cautions When Using a USB Device>
A USB storage device with an automatic recognition program installed or using its own driver may not be
recognized.
Some USB devices may not be supported or may not work properly.
It is recommended to use an external USB hard disk with rated voltage of 5V or less and rated current of
900mA or less.
It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not
enough, the USB storage device may not be recognized properly.)
23
USING THE MONITOR
Headphone port connection
For an angle plug earphone, it is difficult
connect it with a peripheral device, so use a
straight type.
29EA93
(sold separately)
Angle Type
USB UP
AUDIO IN(PC)
H/P
MHL
HDMI 1
USB IN 1
USB IN 2
Straight Type
HDMI 2 / MHL
USB IN 3
5NOTE
V
0.9 A
9A
5V
0.9
09A
Depending on the audio settings of the PC
and external device, headphone and speaker
functions may be limited.
29EB93
(sold separately)
USB UP
USB IN 3
H/P
USB IN 1
5V
0.9 A
AUDIO IN(PC)
USB UP
5V
0.9 A
ENG
ENGLISH
Use the headphone port to connect a peripheral
device to the monitor. Connect as illustrated.
NOTE
24
INSTALLING LG Monitor Software
ENGLISH
ENG
INSTALLING LG MONITOR SOFTWARE
Insert the the owner's manual CD included in the product package into your PC's CD driver and install the
LG Monitor Software.
1 Set the default Web browser to Internet Explorer.
3 Follow the instructions to proceed with the
installation.
LG Monitor Software
4 Check "I accept the terms of the agreement" on
2 Click the "LG Monitor Software" on the CD's
main screen. When the file download window
appears, click the Run button. (The file download window may vary depending on the operating system and the Internet Explorer version,
but the installation procedures are same.)
the License Agreement screen and then click
the [Next] button.
5 Select the program that you want to install.
CAUTION
yyService Pack 1 or higher is required for Window 7.
NOTE
Screen Split: This program automatically
yy
splits the program window as desired.
True Color Finder: This program calibrates
yy
the precise color output of the monitor to suit
your needs.
INSTALLING LG Monitor Software
6 The LG Monitor Software installation starts as
7 If the TUSB3410 driver has not been installed,
it will install automatically. Select "Install this
driver software anyway (I)" if the Windows
security message is displayed as below.
8 The program you selected on the Select
Features page will install automatically.
9 When the installation is complete, restart your
system.
ENG
ENGLISH
shown below.
25
26
INSTALLING LG Monitor Software
NOTE
ENGLISH
ENG
When you run the True Color Finder software,
the True Color Finder icon
[ ] appears in the system tray at the right bottom of the PC screen.
NOTE
To use the True Color Finder function, you
must purchase the supported calibrator.
For details on supported calibrators and
graphic cards, see the True Color Finder
user guide.
If you have changed the input port, it is
recommend that you calibrate the monitor's
picture quality again.
Right-click the True Color Finder icon and select "Start Program" to start the program.
NOTE
If you run Screen Split, the Screen Split icon [
] appears in the system tray at the right bottom
of the PC screen.
CAUTION
Once you have completed the monitor calibration with the True Color Finder software,
remove the calibrator from the monitor and
store it at room temperature away from direct
sunlight or put it in the box.
- If the calibrator's measuring part is exposed
to direct sunlight for a long time, this may
cause damage to the calibrator.
- Do not store it in an environment with too
low/high temperature and high humidity.
If any third-party calibration application is
already installed on your PC, the image quality may be affected by a conflict between the
two applications. For the best performance, it
is recommended to uninstall the other calibration application.
Right-click the Screen Split icon and select a
layout you want.
CUSTOMIZING SETTINGS
27
CUSTOMIZING SETTINGS
ENG
ENGLISH
Activating the Main Menu
1 Press the Menu ( ) button.
2 Use the <, > buttons to adjust the options.
To return to the upper menu or set other menu items, use the Menu (
) button.
3 Press and hold the Menu ( ) button to exit the OSD menu.
Monitor buttons
Button
Menu (
)
Description
If the menu is inactive
Activates the main menu.
If the menu is active
Goes to the previous screen when the button is pressed;
exits the OSD menu when the button is pressed and held for over 3 seconds.
If the menu is inactive
Adjusts the volume level of the monitor.
If the menu is active
Left directional key
If the menu is inactive
Adjusts the volume level of the monitor.
If the menu is active
Right directional key
If the menu is active: pressing OK selects the function.
If the menu is inactive: pressing OK shows the resolution of the current signal (only when there is
input signal).
OK
Powers on or off.
(Power Button)
Power Indicator
When the monitor is in operating mode, the power indicator will turn red (on
mode).
When the monitor is in power-saving mode, the power indicator will blink
red.
NOTE
All of the buttons are touch sensitive and can be operated by simply touching the bottom of the
monitor with your finger.
28
CUSTOMIZING SETTINGS
Customizing settings
ENGLISH
ENG
Menu Settings
1 To view the Menu OSD, press the Menu ( ) button at the bottom of the monitor.
2 Use the < or > buttons to set the options.
3 Select
to exit the OSD menu.
To return to the upper menu or set other menu items, use the Menu (
100
70
30
Brightness Contrast Volume
DVI
Wide
Input
Ratio
Func.
) button.
PIP
All
Picture
Color
Settings
Reset
Exit
Each option is described below.
Menu
Brightness
Contrast
Volume
Description
Adjusts the brightness and contrast of the screen.
Adjusts the volume.
NOTE
Selecting the OK button in the Volume menu will enable/disable the Mute
function.
Input
Selects the current input mode.
Ratio
Adjusts the screen ratio.
Func.
Adjusts ECO, calibration, and picture mode.
PIP
Displays the screens of two input modes on one monitor.
Picture
Adjusts the sharpness, black level, and response time of the screen.
Color
Adjusts the gamma, color temperature and color balance of the screen.
Settings
Sets the Language, PC/AV mode, Main Audio, Button Sound, Power LED, DP 1.2 and OSD Lock.
Reset
Resets to the default settings as of the day of purchase. Press the <, > buttons to reset immediately.
Exit
Exits the OSD menu.
CUSTOMIZING SETTINGS
29
Ratio Settings
ENG
ENGLISH
1 To view the Menu OSD, press the Menu ( ) button at the bottom of the monitor.
2 Press < or > to go to Ratio.
3 Press OK to select Ratio.
4 Use the < or > buttons to set the options.
5 Select
Ratio
to exit the OSD menu.
To return to the upper menu or set other menu items, use the Menu (
) button.
Sub Menu
Wide
Cinema1 Cinema2 Original
1:1
Back
Exit
Each option is described below.
Menu > Ratio
Description
Wide
Displays the video in wide-screen, regardless of the video signal input.
Cinema1
Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Cinema2
Enlarges the screen with an aspect ratio of 21:9 including the black box area at the bottom for
subtitles. (at 1080p)
Original
Displays a video according to the input video signal aspect ratio.
1:1
The aspect ratio is not adjusted from the original.
Back
Moves to the previous OSD screen.
Exit
Exits the OSD menu.
NOTE
The display may look the same for Wide, Original and 1:1 options at the recommended resolution
(2560 x 1080).
The ratio is disabled in the interlaced signal.
30
CUSTOMIZING SETTINGS
Func. Settings
ENGLISH
ENG
1 To view the Menu OSD, press the Menu ( ) button at the bottom of the monitor.
2 Press < or > to go to Func.
3 Press OK to select Func.
4 Use the < or > buttons to set the options.
5 Select
Func.
to exit the OSD menu.
To return to the upper menu or set other menu items, use the Menu (
) button.
Sub Menu
Off
Off
Custom
ECO
Calibration
Picture
Mode
Back
Exit
Each option is described below.
Menu > Func.
ECO
Calibration
Description
On
Enables the ECO function, which allows you to save energy according to the ECO
efficiency level.
Off
Disables the ECO function.
On
Enables the calibration applied to the monitor.
Off
If it is set to Off, the monitor reverts back to the picture quality set before calibration.
NOTE
Run the True Color Finder program.
Picture Mode
Changes depending on the value of PC/AV Mode in Menu > Settings.
PC Mode
Custom
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Text
Optimizes the screen for document processing.
Photo
Optimizes the screen to view photos.
Cinema
Optimizes the screen to improve the visual effects of a video.
Game
Optimizes the screen for gameplay.
AV Mode
Custom
Allows the user to adjust each element. The color mode of the main menu can be
adjusted.
Standard
Optimizes the screen to display normal picture quality.
VIVID 1
Optimizes the screen for vivid visual effects.
VIVID 2
Optimizes the screen for more vivid visual effects.
Cinema
Optimizes the screen to improve the visual effects of a video.
Back
Moves to the previous OSD screen.
Exit
Exits the OSD menu.
CUSTOMIZING SETTINGS
31
PIP settings
ENG
ENGLISH
1 To view the Menu OSD, press the Menu ( ) button at the bottom of the monitor.
2 Press < or > to go to PIP.
3 Press OK to select PIP.
4 Use the < or > buttons to set the options.
5 Select
PIP
to exit the OSD menu.
To return to the upper menu or set other menu items, use the Menu (
) button.
Sub Menu
Off
Balanced
Bottom R
PIP
Size
Position
Back
Exit
Each option is described below.
Menu > PIP
Description
PIP
Displays the screens of two input modes on one monitor.
(DVI+DP, HDMI1+DP, HDMI2+DP, DP+DVI, DP+HDMI1, DP+HDMI2)
Size
Adjusts the size of the secondary screen.
Balanced Uses a balanced size for the secondary screen.
Position
Small
Shows the secondary screen in a small size display.
Medium
Shows the secondary screen in a normal size display.
Large
Shows the secondary screen in a large size display.
Adjusts the position of the secondary screen.
The default value is Bottom Right.
Bottom
Right
Shows the secondary screen in the bottom right of the display.
Bottom
Left
Shows the secondary screen in the bottom left of the display.
Top Left
Shows the secondary screen in the top left of the display.
Top
Right
Shows the secondary screen in the top right of the display.
Back
Moves to the previous OSD screen.
Exit
Exits the OSD menu.
NOTE
If the PIP mode is off, Position is disabled.
If Size is set to Balance, Position is disabled.
32
CUSTOMIZING SETTINGS
Picture
ENGLISH
ENG
1 To view the Menu OSD, press the Menu ( ) button at the bottom of the monitor.
2 Press < or > to go to Picture.
3 Press OK to select Picture.
4 Use the < or > buttons to set the options.
5 Select
to exit the OSD menu.
Picture
To return to the upper menu or set other menu items, use the Menu (
) button.
Sub Menu
5
Low
Middle
Sharpness Black Level Response
Time
Picture
Reset
Back
Exit
Each option is described below.
Menu > Picture
Description
Sharpness
Adjusts the sharpness of the screen.
Black Level
Sets the offset level (for HDMI only).
Offset: as a reference for a video signal, this is the darkest color the monitor can display.
Response Time
High
The picture of the screen gets brighter.
Low
The picture of the screen gets darker.
Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Normal. For a fast-moving picture, it is recommended
that you use High.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Reset
Resets the Picture function to the default settings.
Back
Moves to the previous OSD screen.
Exit
Exits the OSD menu.
CUSTOMIZING SETTINGS
33
Color
ENG
ENGLISH
1 To view the Menu OSD, press the Menu ( ) button at the bottom of the monitor.
2 Press < or >to go to Color.
3 Press OK to select Color.
4 Use the < or > buttons to set the options.
5 Select
Color
to exit the OSD menu.
To return to the upper menu or set other menu items, use the Menu (
) button.
Sub Menu
Gamma 1
Custom
Gamma Color Temp
50
50
50
Red
Green
Blue
Color
Six Color
Reset
Back
Exit
Each option is described below.
Menu > Color
Description
Gamma
Custom gamma setting: When using the gamma 0, gamma 1, and gamma 2 monitor settings,
higher gamma settings mean a brighter image is displayed and vice versa.
Color Temp
Custom
Red
Green
Blue
You can customize the picture color using Red, Green, and Blue colors.
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Six Color
Meets the user requirements for colors through adjusting the color and saturation of the six colors
(red, green, blue, cyan, magenta, yellow) and saving the settings.
Hue
Adjusts tone of the screen.
Saturation
Adjusts the saturation of the screen colors. The lower the value, less saturated and
bright the colors become. The higher the value, the more saturated and dark the colors
become.
Reset
Returns the color settings to the default settings.
Back
Moves to the previous OSD screen.
Exit
Exits the OSD menu.
34
CUSTOMIZING SETTINGS
Settings
ENGLISH
ENG
1 To view the Menu OSD, press the Menu ( ) button at the bottom of the monitor.
2 Press < or > to go to Settings.
3 Press OK to select Settings.
4 Use the < or > buttons to set the options.
5 Select
to exit the OSD menu.
Settings
To return to the upper menu or set other menu items, use the Menu (
) button.
Sub Menu
Language
AV
Audio-In
On
On
On
Off
PC/AV
Mode
Main Audio
Button
Sound
Power LED
DP1.2
OSD Lock
Back
Exit
Each option is described below.
Menu > Settings
Description
Language
Sets the menu screen to the desired language.
PC/AV Mode
Enabled in HDMI mode only.
Main Audio
The sound coming through the Audio In port of the digital input signal (HDMI, HDMI2/MHL, Display
Port) can be heard through the monitor's speakers.
Button Sound
Controls the button tone.
The button tone is heard for the following actions.
DC Power On/Off
Menu OSD On/Off
Power LED
Turns the power indicator on the front side of the monitor on/off.
DP1.2
(DisplayPort1.2)
On
The power indicator is automatically turned on.
Off
The power indicator is turned off.
Activates or deactivates DisplayPort 1.2.
NOTE
Make sure to activate or deactivate according to the DisplayPort version supported by the
graphics card. Set it to off if it is not compatible with the graphics card.
OSD Lock
On
DisplayPort 1.2 is activated.
Off
DisplayPort 1.2 is deactivated.
Prevents incorrect key input.
On
Key input is disabled.
Off
Key input is enabled.
NOTE
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast,
Volume, Input, and Settings are disabled.
Back
Moves to the previous OSD screen.
Exit
Exits the OSD menu.
TROUBLESHOOTING
35
TROUBLESHOOTING
Is the monitor's power cord plugged
in?
Check if the power cord is correctly plugged in to the power outlet.
Is the power indicator on?
Check the power cable connection and press the power button.
Is the power indicator displaying
red?
Check that the connected input is enabled (Menu - Input).
Is the power indicator blinking?
If the monitor is in power-saving mode, move the mouse or press any
key on the keyboard to switch the display on.
Check if the computer is turned on.
Is the "OUT OF RANGE" message
displayed?
This occurs when signals transferred from the PC (video card) are out
of the horizontal or vertical frequency range of the monitor. Please see
the "Product Specification" section of this manual to set the appropriate frequency.
Is the "CHECK SIGNAL CONNECTION" message is displayed?
This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect.
The "OSD LOCKED" message is displayed.
Are some functions unavailable
when pressing the Menu button?
The OSD is locked. Go to Menu > Settings and set "OSD Lock" to
Unlock.
The screen retains an image.
Does image sticking occur even
when the monitor is turned off?
Displaying a still image for a prolonged time may cause damage to the
screen, resulting in the retention of the image.
Use a screen saver to protect the screen when using the monitor for a
prolonged period of time.
NOTE
Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per
second like a fluorescent lamp.
The number of times the screen is refreshed per second is called vertical frequency or refresh rate
and is represented by Hz.
Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle.
The number of horizontal lines displayed in one second can be calculated by dividing one by the horizontal cycle. This is called horizontal frequency and is represented by kHz.
ENG
ENGLISH
Nothing is displayed on the screen.
36
TROUBLESHOOTING
NOTE
ENGLISH
ENG
Check if the video card's resolution or frequency is within the range allowed by the monitor and set to
the recommended (optimal) resolution in Control Panel > Display > Settings.
Failing to set the video card to the recommended (optimal) resolution may result in blurred text, a
dimmed screen, a truncated display area or misalignment of the display.
The configuration procedure may differ depending on your computer and/or operating system. Also,
some video cards may not support certain resolutions. If this is the case, contact the manufacturer of
the computer or video card for assistance.
Some video cards may not support the 2560x1080 resolution.
If the resolution cannot be displayed, contact the manufacturer of your video card.
The display color is abnormal.
Does the display appear discolored
(16 color)?
Set the color to 24 bit (true color) or higher. In Windows, go to Control
Panel > Display > Settings > Color Quality.
Does the display color appear unstable or in monochrome?
Check if the signal cable is connected properly. Reconnect the cable
or reinsert the PC's video card.
Are there spots on the screen?
When using the monitor, pixilated spots (red, green, blue, white or
black) may appear on the screen. This is normal for the LCD screen.
It is not an error nor is it related to the monitor's performance.
SPECIFICATIONS
37
SPECIFICATIONS
ENG
ENGLISH
29EA93
29EB93
LCD Screen
Type
Resolution
Pixel Pitch
Maximum Resolution
73.025 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 73.025 cm
0.0876 mm x 0.2628 mm
2560 x 1080 @ 60 Hz
Recommended Resolution 2560 x 1080 @ 60 Hz
Video Signal
Input Connector
Power
AC/DC adaptor
Stand Angle
Adjustment
Environmental
Conditions
Horizontal Frequency
30 kHz to 90 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization
Separate Sync.
DVI-D, HDMI 1, HDMI 2(MHL), Display Port, Audio In(PC), H/P Out, USB Up,
USB In 1, 2, 3
Voltage
19.5 V
3.8 A
Power consumption (Typ.) On mode: 48 W (Typ, without USB)
68 W (Max, with USB, Audio 50%)
Power Saving Mode ≤ 1.2 W
Off Mode ≤ 0.5 W
AAM-00 type, manufactured by AMPOWER Technology., Co.Ltd.
Output: 19.5 V
5.65 A
Forwards/Backwards: -5° to 20° (Head)
Operating Condition
Temperature: 10°C to 35°C; Humidity: 10% to 80%
Storing Condition
Temperature: -20°C to 60°C; Humidity: 5% to 90%
Speaker Wattage 7W + 7W
29EA93
Dimension
Monitor Size (Width x Height x Depth)
With Stand
699.7 mm x 387.0 mm x 208.5 mm
Without Stand
699.7 mm x 318.0 mm x 68.5 mm
Weight (Without
Packaging)
5.65 kg
29EB93
Dimension
Monitor Size (Width x Height x Depth)
With Stand
699.7 mm x 395.3 mm x 225 mm
Without Stand
699.7 mm x 318.0 mm x 68.5 mm
Weight (Without
Packaging)
6.84 kg
The specifications are subject to change without notice.
38
SPECIFICATIONS
ENGLISH
ENG
Factory support mode
(Preset Mode, DVI-D/HDMI/PC Display Port)
Preset Mode
Horizontal Frequency Vertical Frequency
Polarity (H/V)
(kHz)
(Hz)
720 x 400
31.468
70.08
-/+
640 x 480
31.469
59.94
-/-
640 x 480
37.5
75
-/-
800 x 600
37.879
60.317
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.123
75.029
+/+
1152 x 864
67.5
75
+/+
1280 x 720
45
60
+/+
1280 x 1024
63.981
60.02
+/+
1280 x 1024
79.976
75.025
+/+
1600 x 900
60
60
+/+
1680 x 1050
65.290
59.954
-/+
1920 x 1080
67.5
60
+/-
2560 x 1080
66.7
60
-/+
HDMI/MHL Timing (Video)
Preset Mode
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
480P
31.50
60
576P
31.25
50
720P
37.50
50
720P
45.00
60
1080i
28.12
50
1080i
33.75
60
1080P
56.25
50
1080P
67.50
60
Power Indicator
Mode
LED Color
On Mode
Red
Power-saving
Blinking in red
Off Mode
Off
Remarks
PROPER POSTURE
39
PROPER POSTURE
Adjust the screen so that you can comfortably view at a slight downward angle from your natural eye level.
Take a break for approximately ten minutes every hour to reduce any fatigue caused by long-time usage.
The stand of the touch monitor allows the product to be used in the optimum position.
Adjust the stand angle from -5° to 20° to obtain the best view of the screen.
You should be looking
slightly down at the screen.
Adjust the angle
-5° to 20°
So that there is no reflection
or glare from the screen.
Place your hands gently on
the keyboard, keeping your
arms bent at the elbows and
extended horizontally in front
of you.
ENG
ENGLISH
Proper Posture for Using the Monitor
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial number of the SET
is located on the back and one side of the
SET. Record it below should you ever need
service.
MODEL
SERIAL
Download PDF

advertising