LG | 29WK600 | LG 29WK600 Owner’s Manual

Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read the safety information carefully before using the product.
IPS LED Monitor (LED Monitor) Model List
29WK600
34WK650
34BK650
www.lg.com
2
Contents
CONTENTS
ENGLISH
ENG
3 LICENSE
20 USER SETTINGS
4 ASSEMBLING AND PREPARING
20
20
21
21
4
5
6
6
7
8
9
9
10
10
11
12
13
14
15
16
16
Product Components
Supported Drivers and Software
Component and Button Description
- How to Use the Joystick Button
Input Connector
Moving and Lifting the Monitor
Installing the Monitor
- Assembling the stand base
Installing the Monitor
- Assembling the stand base
- Using the cable holder
- Installing onto a table
- Adjusting the angle
- Adjusting the Stand Height
- Using the Kensington lock
- Installing the wall mount plate
- Installing to a wall
18 USING THE MONITOR
18
18
18
19
19
19
19
Connecting to a PC
- HDMI connection
- DisplayPort connection
Connecting to AV Devices
- HDMI connection
Connecting to External Devices
- Connecting Headphones
Activating the Main Menu
- Main Menu Features
User Settings
- Menu Settings
26 TROUBLESHOOTING
28‌SPECIFICATIONS
28
29
30
30
30
30
29WK600
34WK650/34BK650
Factory Support Mode (Preset Mode, PC)
HDMI / DP Timing (PC)
HDMI Timing (Video)
Power LED
LICENSE
3
LICENSE
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
MaxxAudio and additional MAXX trademarks are trademarks and/or registered trademarks of Waves Audio Ltd.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP
Directive:
* This monitor is set to be turned off automatically after 4 hours when you turn on the display and there is are no adjustments made to the display.
* To make this setting be disabled, change the option to ‘Off’ in Setttings menu of “Automatic Standby”.
ENG
ENGLISH
Each model has different licenses. Visit www.lg.com for more information on the license.
4
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
ENGLISH
ENG
Product Components
Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look
different from those shown here.
or
Power Cord
CD(Owner's Manual) /
Card
AC-DC Adapter
( Depending on the country )
DisplayPort Cable
( This cable is not included
in all countries. )
AC-DC Adapter
( Depending on the country )
HDMI Cable
( This cable is not included
in all countries. )
29WK600
Stand Body
Stand Base
Screw Cover
2 Screws
34WK650
34BK650
Stand Body
Stand Base
Cable Holder
CAUTION
Always use genuine components to ensure safety and product performance.
yy
The product warranty will not cover damage or injury caused by the use of counterfeit components.
yy
It is recommend that use the supplied components.
yy
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
yy
NOTE
Note that the components may look different from those shown here.
yy
Without prior notice, all information and specifications in this manual are subject to change to improve the
yy
performance of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store
yy
where you purchased the product.
ASSEMBLING AND PREPARING
5
Supported Drivers and Software
Drivers and Software
Installation Priority
29WK600/34WK650/34BK650
Monitor Driver
Recommended
O
OnScreen Control
Recommended
O
Optional
O
Dual Controller
Required and Recommended: You can download and install the latest version from the enclosed CD or from the
yy
LGE website (www.lg.com).
Optional: You can download and install the latest version from the LGE website (www.lg.com).
yy
ENG
ENGLISH
Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product
package.
6
ASSEMBLING AND PREPARING
Component and Button Description
ENGLISH
ENG
29WK600
34WK650
34BK650
Joystick Button
Power LED
yyOn: power is on
yyOff: power is off
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.
Basic Functions
◄/►
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off the
monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
NOTE
yy The joystick button is located at the bottom of the monitor.
ASSEMBLING AND PREPARING
7
Input Connector
34WK650
34BK650
ENG
ENGLISH
29WK600
8
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
ENGLISH
ENG
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched
or damaged and to ensure safe transportation regardless of its shape or size.
CAUTION
As far as possible, avoid touching the monitor
yy
screen. This may result in damage to the screen or
some of the pixels used to create images.
29WK600
It is advisable to place the monitor in the original
yy
box or packing material before attempting to
move it.
Before moving or lifting the monitor, disconnect
yy
the power cord and all cables.
Hold the top and bottom of the monitor frame
yy
firmly. Do not hold the screen itself.
34WK650
34BK650
When holding the monitor, the screen should face
yy
away from you to prevent it being scratched.
When moving the monitor, avoid any strong shock
yy
or vibrations to the product.
When moving the monitor, keep it upright, never
yy
turn the monitor on its side or tilt it sideways.
If you use the monitor panel without the stand
yy
base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
ASSEMBLING AND PREPARING
9
Installing the Monitor
ENG
ENGLISH
Assembling the stand base
3
29WK600
1
Stand Body
Stand Base
CAUTION
To protect the screen from scratches, cover the
yy
surface with a soft cloth.
4
Screw Cover
2
Stand Body
CAUTION
Applying excessive force when tightening the
screws may cause damage to the monitor. Damage caused in this way will not be covered by the
product warranty.
CAUTION
It may hurt your foot off the stand, so be careful.
NOTE
You can disassemble the stand in the reverse
yy
order of the assembly.
10
ASSEMBLING AND PREPARING
Installing the Monitor
ENGLISH
ENG
Assembling the stand base
34WK650
34BK650
3
1
Stand Body
Stand Base
CAUTION
4
To protect the screen from scratches, cover the
yy
surface with a soft cloth.
Cable Holder
2
Stand Body
NOTE
Press the stand until the button reaches the top.
yy
ASSEMBLING AND PREPARING
Illustrations in this document represent typical
yy
procedures, so they may look different from the
actual product.
Do not carry the monitor upside down by just
yy
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not
yy
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
Do not apply foreign substances (oils, lubricants,
yy
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
Applying excessive force when tightening screws
yy
may cause damage to the monitor. Damage
caused in this way will not be covered by the
product warranty.
Using the cable holder
Arrange the cables using the cable holder as shown in
the illustration.
34WK650
34BK650
NOTE
You can disassemble the stand in the reverse
yy
order of the assembly.
cable holder
ENG
ENGLISH
CAUTION
11
12
ASSEMBLING AND PREPARING
Installing onto a table
ENGLISH
ENG
1 Lift the monitor and place it on the table in an upright position.
Place at least 100 mm away from the wall to ensure
sufficient ventilation.
2 Connect the Power cord to the monitor, then plug
the power cord into the wall outlet.
29WK600
29WK600
100 mm
100 mm
100 mm
100 mm
or
34WK650
34WK650
34BK650
34BK650
100 mm
100 mm
100 mm
100 mm
or
3 Press the joystick button on the bottom of the
monitor to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or installyy
ing the monitor. There is risk of electric shock.
ASSEMBLING AND PREPARING
Cautions When Connecting Power Cord
13
Adjusting the angle
on the stand base.
2 Adjust the angle of the screen. The angle of the
screen can be adjusted forwards or backwards for a
comfortable viewing experience.
29WK600
15°
100-240 V~
-5°
Make sure to use the power cord that is proyy
vided in the product package and connect it to a
grounded power outlet.
If you need another power cord, please contact
yy
your local dealer or the nearest retail store.
Rear Side
34WK650
Front Side
34BK650
15°
Rear Side
-5°
Front Side
ENG
ENGLISH
1 Place the monitor in an upright position, mounted
14
ASSEMBLING AND PREPARING
WARNING
ENGLISH
ENG
To avoid injury to the fingers when adjusting the
yy
screen, do not hold the lower part of the monitor's frame as illustrated below.
Adjusting the Stand Height
34WK650
34BK650
1 Handle the monitor with both hands for safety.
29WK600
2 The height can be adjusted up to 110.0 mm.
34WK650
34BK650
110.0 mm
WARNING
Be careful not to touch or press the screen area
yy
when adjusting the angle of the monitor.
34WK650
34BK650
When adjusting the screen
yy
height, do not place your
hand on the stand body to
avoid injury to your fingers.
ASSEMBLING AND PREPARING
15
Using the Kensington lock
34WK650
34BK650
ENG
ENGLISH
The Kensington security system connector is located at
the back of the Monitor set.
For more information on installation and usage, refer to
the Kensington lock user manual or visit the website at
http://www.kensington.com.
Connect the Kensington security system cable between
the Monitor set and a table.
29WK600
NOTE
Use of the Kensington lock is optional.
yy
The accessories can be purchased at your local
electronics store.
NOTE
34WK650
34BK650
The left or right side of the monitor head can be
yy
slightly rotated up or down (up to 3°). Adjust the
horizontal level of the monitor head.
Monitor head
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
Installing the wall mount plate
Installing to a wall
This monitor supports the specification of the standard
wall mount plate or compatible device.
Install the monitor at least 100 mm away from the wall
and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Please refer to the manual to install and set up a
tilting wall mounting bracket.
1 Place the screen face down. To protect the screen
from scratches, cover the surface with a soft cloth.
2 Place the wall mount plate onto the monitor and
align it with the screw holes.
3 Tighten the four screws to fix the plate to the monitor using a screwdriver.
100 mm
NOTE
The wall mount plate is sold separately.
yy
For more information on installation, refer to the
yy
wall mount plate's installation guide.
Be careful not to use excessive force when
yy
mounting the wall mount plate, as this can damage the monitor's screen.
100 mm
100 mm
100 mm
To install the monitor to a wall, attach a wall mounting
bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed
to the monitor and to the wall.
1 If you use screw longer than standard, the monitor
might be damaged internally.
2 If you use improper screw, the product might be damaged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
29WK600
Wall Mount (A x B)
Standard screw
Number of screws
Wall Mount Plate
(Optional)
34WK650
100 x 100
M4 x L10
4
RW120
34BK650
Wall Mount (A x B)
Standard screw
Number of screws
Wall Mount Plate
(Optional)
100 x 100
M4 x L10
4
RW120
ASSEMBLING AND PREPARING
NOTE
Wall Mount (A x B)
yy
A
34WK650
B
A
B
B
CAUTION
Unplug the power cord before moving or installyy
ing the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a
yy
slanted wall may result in the monitor falling off,
which could lead to injury. Please use the genuine LG wall mounting bracket. For more information, contact your local retail store or a qualified
installer.
Applying excessive force when fastening screws
yy
may cause damage to the monitor. Damage
caused in this way will not be covered by the
product warranty.
Use the wall mounting bracket and screws
yy
that conform to the VESA standard. Damage
caused by the use or misuse of inappropriate
components will not be covered by the product
warranty.
Screw length from outer surface of back cover
yy
should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
Max.8mm
Use the screws specified by the VESA standard.
yy
The wall mount kit includes the installation guide
yy
and all necessary parts.
The wall mounting bracket is optional. The accesyy
sories can be purchased at your local retail store.
The length of the screw may differ for each wall
yy
mounting bracket. Ensure the correct length
screw is used.
For more information, please refer to the user
yy
manual for the wall mounting bracket.
ENG
ENGLISH
29WK600
34BK650
17
18
USING THE MONITOR
USING THE MONITOR
ENGLISH
ENG
Connecting to a PC
This monitor supports the *Plug and Play feature.
yy
*Plug and Play: A feature that allows you to add
a device to your computer without having to
reconfigure anything or install any manual drivers.
DisplayPort connection
Transmits the digital video and audio signals from your
PC to the monitor. Connect your PC to the monitor using the DisplayPort cable as illustrated below.
Press the menu button and then select the input option
from the input menu.
HDMI connection
Transmits the digital video and audio signals from your
PC and A/V devices to the monitor. Connect your PC
and AV device to the monitor with the HDMI cable as
illustrated below.
Press the menu button and then select the input option
from the input menu.
NOTE
There may be no video or audio output depending
yy
on the DP version of the PC.
yy If you use generic cables not certified by LG, the
screen may not display or there may be image
noises.
NOTE
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo attached.
yy
If you do not use a certified HDMI cable, the
screen may not display or a connection error may
occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
USING THE MONITOR
19
Connecting to External Devices
HDMI connection
Connecting Headphones
Transmits the digital video and audio signals from your
PC and A/V devices to the monitor. Connect your PC
and AV device to the monitor with the HDMI cable as
illustrated below.
Press the menu button and then select the input option
from the input menu.
Connect peripherals to the monitor via the headphones
port. Connect as illustrated.
(sold
separately)
(sold
separately)
NOTE
NOTE
Use a certified cable with the HDMI logo attached.
yy
If you do not use a certified HDMI cable, the
screen may not display or a connection error may
occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
yy Peripheral devices are sold separately.
yy If you use angled earphones, it may cause a problem with connecting another external device to
the monitor. Therefore, it is recommended to use
straight earphones.
Angled
Straight
yy Depending on the audio settings of the PC and
external device, headphones and speaker functions
may be limited.
ENG
ENGLISH
Connecting to AV Devices
20
User Settings
USER SETTINGS
ENGLISH
ENG
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right (◄/►) to set the options.
3 Press the joystick button once more to exit the main menu.
Joystick Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor. You can turn off the
monitor this way at any time, including when the OSD is on.)
◄
►
▲
▼
Main menu disabled
Adjusts the monitor volume level.
Main menu enabled
Enters the Input feature.
Main menu disabled
Adjusts the monitor volume level.
Main menu enabled
Enters the Settings features.
Main menu disabled
Displays information on the current input.
Main menu enabled
Turns off the monitor.
Main menu disabled
Displays information on the current input.
Main menu enabled
Enters the Game features.
Main Menu Features
Main Menu
Power Off
Power Off
Input
Input
Exit
Exit
Settings
Power Off
Game
Input
Exit
Game
Settings
Power Off
Game
Input
Exit
Game
Settings
Settings
Description
Settings
Configures the screen settings.
Game
You can change Picture Mode to a gaming mode.
Input
Sets input mode.
Power Off
Turns off the monitor.
Exit
Exits the main menu.
User Settings
21
User Settings
1 To view the settings menu, press the joystick button at the bottom of the monitor and then enter the Settings.
2 Configure the options by moving the joystick up/down/left/right.
3 To return to the upper settings or set other settings items, move the joystick to◄ or press ( ).
4 If you want to exit the settings menu, move the joystick to ◄ until you exit.
Input
Quick Settings
Sound
Picture
General
CAUTION
yy Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
Each option is described below.
Settings > Quick Settings
Brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
NOTE
yy You can adjust Mute / Unmute by moving the joystick button to▼in the Volume menu.
Color Temp
MaxxAudio
Custom
The user can adjust it to red, green, or blue by customization.
Warm
Sets the screen color to a reddish tone.
Medium
Sets the screen color between a red and blue tone.
Cool
Sets the screen color to a bluish tone.
On
MaxxAudio® by Waves, recipient of a Technical GRAMMY Award® is a suite of studio-quality
sound tools for a superior listening experience.
Off
Disables the MaxxAudio function.
Settings > Input
Description
Input List
Selects the input mode.
Aspect Ratio
Adjusts the aspect ratio of the screen.
Full Wide
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays video according to the aspect ratio of the video signal input.
Cinema1
Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Cinema2
Enlarges the screen with an aspect ratio of 21:9, including the black box at the bottom for
subtitles. (at 1080p)
NOTE
yy There is no Cinema1, Cinema2 settings on FreeSync Mode. ( Go to Picture → Game Adjust →
FreeSync, to set FreeSync On or Off)
ENG
ENGLISH
Menu Settings
22
User Settings
Picture Mode on SDR(Non-HDR) signal.
Settings > Picture
ENGLISH
ENG
Picture Mode
Description
Custom
Allows the user to adjust each element. The color mode of the main menu can be
adjusted.
Reader
Optimizes the screen for viewing documents. You can brighten the screen in the settings menu.
Photo
Optimizes the screen for photos.
Cinema
Optimizes the screen for video.
HDR Effect
Optimizes the screen for high dynamic range.
Color Weakness This mode is for users who cannot distinguish between red and green. It enables users
with color weakness to easily distinguish between the two colors.
FPS Game 1
This mode is optimized for FPS games.
FPS Game 2
It has a higher Black Stabilizer value than FPS Game 1. It is suitable for very dark FPS
games.
RTS Game
This mode is optimized for RTS Game.
Custom (Game)
In this mode, users can customize various elements including game-related options.
NOTE
yy If the picture mode is changed in the screen may flicker or the resolution of your PC screen may be
affected.
Picture Mode on HDR signal.
Settings > Picture
Picture Mode
Description
HDR Vivid
Optimized the screen for HDR vivid colors.
HDR Standard
Optimized the screen for HDR.
HDR Game
Optimized the screen for HDR Games.
HDR Cinema
Optimized the screen for HDR video.
NOTE
yy HDR content may not be operated properly depending on the Windows10 OS setting. Please check the
HDR On / Off setting of Windows.
yy When the HDR function is turned on, the characters or picture quality may be poor according to Graphic
card performance.
yy While the HDR function is on, screen flickering or cracking may occur when changing the monitor input or
power on/off according to Graphic card performance.
User Settings
Picture Adjust
23
Adjusts the brightness of the screen.
Contrast
Adjusts the contrast of the screen.
Sharpness
Adjusts the sharpness of the screen.
SUPER
RESOLUTION+
High
Optimized picture quality is displayed when a user wants crystal clear images. It
is effective for high quality video or game.
Middle
The optimized picture quality is displayed when a user wants images between
low and high modes for comfortable viewing. It is effective for UCC or SD video.
Low
The optimized picture quality is displayed when a user wants smooth and natural images.
It is effective for slow-moving pictures or still images.
Off
Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in
this mode.
NOTE
yy Because this is a function to increase the sharpness of low resolution pictures, it is not
recommended to use the function for normal text or for desktop icons. Doing so may
result in unnecessarily high sharpness.
Black Level
DFC
Game Adjust
Response Time
FreeSync
Sets the offset level (for HDMI only).
yy Offset: as a reference for a video signal, this is the darkest color the monitor can display.
High
Keeps the current contrast ratio of the screen.
Low
Lowers the black levels and raises the white levels from the current contrast
ratio of the screen.
On
Adjusts the brightness automatically according to the screen.
Off
Disables the DFC feature.
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Fast. For a fast-moving picture, it
is recommended that you use Faster.
Setting to Faster may cause image sticking.
Faster
Sets the response time to Faster.
Fast
Sets the response time to Fast.
Normal
Sets the response time to Normal.
Off
Does not use the response time improvement feature.
Provides seamless and natural images by synchronizing the vertical frequency of the input
signal with that of the output signal.
CAUTION
yy Supported Interface: DisplayPort,HDMI.
yy Supported Graphic Card : A graphic card that supports AMD’s FreeSync is
necessary.
yy Supported Version : Make sure to update the graphic card to the latest driver.
yy For more information and requirement, refer to AMD website at http://www.
amd.com/FreeSync
On
FreeSync function on.
Off
FreeSync function off.
Black Stabilizer
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can
easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
Cross Hair
Cross Hair provides a mark on the center of the screen for First Person Shooter (FPS) games.
Users can select the cross hair that fits their gaming environment among four different
cross hairs.
yy When the monitor is off or enters energy saving mode, the Cross Hair feature is automatically turned Off.
ENG
ENGLISH
Brightness
24
User Settings
Color Adjust
Gamma
Mode 1, Mode 2, The higher the gamma value, the darker the image becomes. Likewise, the
lower the gamma value, the lighter the image becomes.
Mode 3
ENGLISH
ENG
Color Temp
Red
Mode 4
If you do not need to adjust the gamma settings, select Mode 4.
Custom
The user can adjust it to red, green, or blue by customization.
Warm
Sets the screen color to a reddish tone.
Medium
Sets the screen color between a red and blue tone.
Cool
Sets the screen color to a bluish tone.
You can customize the picture color using Red, Green, and Blue colors.
Green
Blue
Six Color
Picture Reset
Meets the user requirements for colors by adjusting the hue and saturation of the six colors
(Red, Green, Blue, Cyan, Magenta, Yellow) and then saving the settings.
Hue
Adjusts the tone of the screen colors.
Saturation
Adjusts the saturation of the screen colors. The lower the value, the less
saturated and brighter the colors become. The higher the value, the more
saturated and darker the colors become.
Do you want to Picture reset your settings?
No
Cancel
Yes
Reset
Settings > Sound
Description
Volume
To adjust the Volume of headphone or speaker.
MaxxAudio
On
MaxxAudio® by Waves, recipient of a Technical GRAMMY Award® is a suite of studioquality sound tools for a superior listening experience.
Off
Disables the MaxxAudio function.
User Settings
Settings > General
Description
Sets the menu screen to the desired language.
SMART ENERGY
SAVING
High
Saves energy using the high-efficiency SMART ENERGY SAVING feature.
Low
Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Off
Disables the SMART ENERGY SAVING feature.
On
The power LED turns on.
Off
The power LED turns off.
Automatic Standby
Feature that automatically turns off the monitor when there is no movement on the screen for a period
of time. You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H)
HDMI
Compatibility Mode
HDMI Compatibility Mode feature can recognize the legacy equipment that does not support HDMI 2.0.
On
Enables HDMI Compatibility Mode.(HDMI Version 1.4)
Off
Disables HDMI Compatibility Mode.(HDMI Version 2.0)
NOTE
yy If the connected device does not support HDMI Compatibility Mode, the screen or sound may not
work properly.
yy When HDMI Compatibility Mode is on, HDR function is not supported.
yy Some older graphics cards do not support HDMI 2.0,but you can select HDMI 2.0 resolution in the
control panel of window. This may cause the screen to appear abnormally.
DisplayPort 1.2
Enable or Disable DisplayPort 1.2.
NOTE
yy Be sure to configure this option according to the DisplayPort version supported by your
graphics card. Set this option to Disable if your graphics card does not support DisplayPort 1.2.
Buzzer
OSD Lock
This feature lets you set the sound generated from Buzzer when your monitor powers on.
On
Enables your monitor's Buzzer.
Off
Disables your monitor's Buzzer.
This feature disables the configuration and adjustment of menus.
On
Enables OSD Lock.
Off
Disables OSD Lock.
NOTE
yy All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock, Information.
Information
The display information will be shown the Model, Serial Number, Total Power On Time, Resolution.
Reset
Do you want to reset your settings?
No
Cancel the select.
Yes
Returns to the default settings.
NOTE
yy Saving Data depends on the Panel. These values vary by panel and vendor. If the option SMART ENERGY SAVING is set High
or Low, then monitor luminance becomes higher or lower depending upon the source.
ENG
ENGLISH
Language
Power LED
25
26
TROUBLESHOOTING
TROUBLESHOOTING
ENGLISH
ENG
Nothing is displayed on the screen.
Is the monitor's power cord plugged in?
Check if the power cord is correctly plugged into the power outlet.
yy
Test the Power Plug using a lamp or other device.
yy
Is the power LED on?
Check the power cable connection and press the power button.
yy
Check that the connected input is enabled (Settings >Input > Input list).
yy
Is the power on and the power LED
displaying white?
Is the power LED blinking?
Is the OUT OF RANGE message being
displayed?
Is the No Signal message being
displayed?
If the monitor is in sleep mode, move the mouse, or press any key on the
yy
keyboard, to switch the display on.
Check if the computer is turned on.
yy
This occurs when signals transferred from the PC (graphics card) are out
yy
of the horizontal or vertical frequency range of the monitor. Please see
the Product Specification section of this manual to set the appropriate
frequency.
This is displayed when the signal cable between the PC and the monitor is
yy
missing or disconnected. Check the cable and reconnect it.
The OSD lock message is being displayed.
Are some functions not available when
you press the Menu button?
The OSD is locked. Go to Settings > General and set OSD Lock to Off.
yy
The screen retains an image.
Does image sticking occur even when
the monitor is turned off?
Displaying a still image for a prolonged time may cause damage to the
yy
screen, resulting in the retention of the image.
To extend the lifetime of the monitor, use a screensaver.
yy
Screen display is unstable and shaky / Images displayed on the monitor leave shadow trails.
Did you select the appropriate
resolution?
If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen
yy
may be flickering. Change the resolution to 1080P or the recommended
resolution.
NOTE
yy Vertical frequency In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent
lamp. The number of times the screen is refreshed per second is called vertical frequency, or refresh rate, and is represented by
Hz.
yy Horizontal frequency The time it takes to display one horizontal line is called the horizontal cycle. If 1 is divided by the
horizontal interval, the result is the number of horizontal lines displayed per second. This is called horizontal frequency and is
represented by kHz.
yy LED can be lighted with Set OSD Menu.
Settings – General – Power LED – On
TROUBLESHOOTING
27
NOTE
The display color is abnormal.
Does the display appear discolored (16
colors)?
Set the color to 24 bit (true color) or higher. In Windows, go to Control
yy
Panel > Display > Settings > Color Quality.
Does the display color appear unstable
or monochrome?
Check if the signal cable is connected properly. Reconnect the cable or
yy
reinsert the PC's graphics card.
Are there spots on the screen?
When using the monitor, pixilated spots (red, green, blue, white, or black)
yy
may appear on the screen. This is normal for an LCD screen. It is not an
error, nor is it related to the monitor's performance.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?
Be sure to install the display driver from the display driver CD (or diskette)
yy
that comes with your display. Or, you can also download the driver from
our web site: http://www.lg.com.
Make sure to check if the video card supports Plug&Play function.
yy
No sound from the headphone port or speaker.
Are images displayed using DisplayPort
or HDMI input without sound?
Try increasing the volume using the button on the monitor.
yy
Set the audio output of the PC to the monitor you are using. On Microsoft
yy
Windows, go to Control Panel > Hardware and Sound > Sound > set the
monitor as default device.
ENG
ENGLISH
Check if the graphics card's resolution or frequency is within the range allowed by the monitor and set it to the
yy
recommended (optimal) resolution in Control Panel > Display > settings.
Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed
yy
screen, a truncated display area, or misalignment of the display.
The setting methods may be different depending on the computer or operating system, and some resolutions
yy
may not be available depending on the performance of the graphics card. If this is the case, contact the
manufacturer of the computer or graphics card for assistance.
Some graphics cards may not support 2560×1080 resolution. If the resolution cannot be displayed, contact the
yy
manufacturer of your graphics card.
28
SPECIFICATIONS
‌SPECIFICATIONS
ENGLISH
ENG
29WK600
LCD Screen
Resolution
Video Signal
Type
TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Pixel Pitch
0.2628 mm x 0.2628 mm
Maximum Resolution
2560×1080 @ 75 Hz
Recommended Resolution
2560×1080 @ 60 Hz
Horizontal Frequency
30 kHz to 90 kHz
Vertical Frequency
56 Hz to 75 Hz
Input Connector
HDMI IN1, HDMI IN2, DP(DisplayPort) IN, H/P(Headphone) OUT
Power input
19 V
3.3 A
Power
On mode: 20.5 W Typ. (ENERGY STAR® standard)*
consumption (Typ.)
32 W Typ. (Outgoing condition)**
Sleep Mode ≤ 0.5 W
Off Mode ≤ 0.3 W
AC/DC adaptor
Type DA-65G19, Asian Power Devices Inc. production
Or type LCAP39, LIEN CHANG ELECTRONIC ENTERPRISE production
Output: 19 V
3.42 A
Environmental
Conditions
Operating Condition
Temperature: 0°C to 40°C; Humidity: < 80%
Storing Condition
Temperature: -20°C to 60°C; Humidity: < 85%
Dimension
Monitor Size (Width x Height x Depth)
Weight (Without
Packaging)
With Stand
698.1 mm x 410.9 mm x 209.4 mm
Without Stand
698.1 mm x 317.5 mm x 76.9 mm
With Stand
5.2 kg
Without Stand
4.7 kg
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
SPECIFICATIONS
29
‌SPECIFICATIONS
LCD Screen
Resolution
Video Signal
Type
TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Pixel Pitch
0.312 mm x 0.310 mm
Maximum Resolution
2560×1080 @ 75 Hz
Recommended Resolution
2560×1080 @ 60 Hz
Horizontal Frequency
30 kHz to 90 kHz
Vertical Frequency
56 Hz to 75 Hz
Input Connector
HDMI IN1, HDMI IN2, DP(DisplayPort) IN, H/P(Headphone) OUT
Power input
19 V
3.3 A
Power
On mode: 28 W Typ. (ENERGY STAR® standard)*
consumption (Typ.)
42 W Typ. (Outgoing condition)**
Sleep Mode ≤ 0.5 W
Off Mode ≤ 0.3 W
AC/DC adaptor
Type DA-65G19, Asian Power Devices Inc. production
Or type LCAP39, LIEN CHANG ELECTRONIC ENTERPRISE production
Output: 19 V
3.42 A
Environmental
Conditions
Operating Condition
Temperature: 0°C to 40°C; Humidity: < 80%
Storing Condition
Temperature: -20°C to 60°C; Humidity: < 85%
Dimension
Monitor Size (Width x Height x Depth)
Weight (Without
Packaging)
With Stand
825.6 mm x 570.7 mm x 230.0 mm
Without Stand
825.6 mm x 369.8 mm x 51.2 mm
With Stand
7.6 kg
Without Stand
5.9 kg
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard (Full White pattern,Maximum resolution).
ENG
ENGLISH
34WK650/34BK650
30
SPECIFICATIONS
Factory Support Mode (Preset Mode, PC)
ENGLISH
ENG
HDMI / DP Timing (PC)
Resolution
(HDMI / DP)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
640 x 480
31.469
59.94
-/-
640 x 480
37.5
75
-/-
800 x 600
37.879
60.317
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.123
75.029
+/+
1152 x 864
53.697
60
-/+
1280 x 720
45
60
+/+
1280 x 1024
63.981
60.02
+/+
1280 x 1024
79.976
75.025
+/+
1600 x 900
60
60
+/+
1680 x 1050
65.29
59.954
-/+
1920 x 1080
67.5
60
+/-
2560 x 1080
66.636
59.98
-/+
2560 x 1080
83.915
74.99
-/+
HDMI Timing (Video)
Factory support mode
(Preset Mode)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
480p
31.5
60
576P
31.25
50
720p
37.5
50
720p
45.0
60
1080p
56.25
50
1080p
67.5
60
2160p
112.5
50
2160p
135
60
Power LED
Mode
LED Color
On Mode
White (For a few seconds)
Sleep Mode
Off
Off Mode
Off
Remarks
Remarks
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.LG Electronics will also provide
open source code to you on CD-ROM for a charge
covering the cost of performing such distribution
(such as the cost of media, shipping, and handling)
upon email request to opensource@lge.com. This
offer is valid for three (3) years from the date on
which you purchased the product.
This device meets the EMC requirements for home
appliances (Class B) and is intended for home usage.
This device can be used in all regions. Read the
owner's manual (CD) carefully and keep it at hand.
Please note that the label attached to the product
provides information for technical support.
MODEL
SERIAL
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S.
A.,Inc. has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
Refer to ENERGY STAR.gov for more information
on the ENERGY STAR program.
Download PDF

advertising