LG | 34UC89G | LG 34UC89G Owner’s Manual

OWNER’S MANUAL
IPS LED Monitor
(LED Monitor*)
* L G LED Monitor applies LCD screen with LED
backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
34UC89G
www.lg.com
2
ENGLISH
TABLE OF CONTENTS
LICENSE........................................3
ASSEMBLING AND PREPARING.4
-- Product Composition...................................................4
-- Supported Drivers and Software..........................5
-- Product and Button Description...........................6
How to Use the Joystick Button
Input Connector
-- Moving and Lifting the Monitor............................8
-- Installing the Monitor .............................................10
Assembling the Stand
Installing on a Table
USING THE MONITOR............... 20
-- Connecting to a PC...................................................20
HDMI Connection
DisplayPort Connection
-- Connecting AV Devices............................................22
HDMI Connection
-- Connecting Peripherals...........................................22
USB Cable connection
Connecting Headphones
-- Service only port.........................................................24
USER SETTINGS........................ 25
Adjusting the Stand Height
-- Activating the Main Menu.....................................25
Adjusting the Angle
Main Menu Features
-- User Settings................................................................27
Tidying up Cables
Using the Kensington Lock
Menu Settings
Detaching the Stand Body
Game Mode
Installing the Wall Mount Plate
Game Adjust
Installing on the Wall
Picture Adjust
Input
General
TROUBLESHOOTING................. 37
PRODUCT SPECIFICATION....... 40
-- Factory Support Mode............................................42
-- G-SYNC Monitor.........................................................42
-- Power LED......................................................................43
3
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
ENGLISH
LICENSE
4
ENGLISH
ASSEMBLING AND PREPARING
Product Composition
Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the
product. Note that the product and related components may look different from those shown here.
CD (Owner’s Manual / Software /
Guides) / Cards
Power cord
AC/DC Adapter
USB 3.0 Cable
Stand Base
Cable Holder
Stand Body
Mouse Holder
DisplayPort Cable
5
•• Always use genuine LG components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of
unauthorized components.
•• It is recommend that use the supplied components.
•• If you use generic cables not certified by LG, the screen may not display or there
may be image noises.
NOTE
•• The components may look different from those illustrated here.
•• Without prior notice, all product information and specifications contained in this
manual are subject to change to improve the performance of the product.
•• To purchase optional accessories, visit an electronics store or an online shopping
site, or contact the retailer from which you purchased the product.
•• The power cord provided may differ depending upon the region.
Supported Drivers and Software
Check the drivers and software supported by your product and refer to the manuals
on the CD enclosed in the product package.
Drivers and Software
Monitor Driver
ASM Driver
Installation Priority
34UC89G
Recommended
O
Required
X
Recommended
O
Optional
X
Optional
X
•• Required and Recommended: You can download and install the latest version from
the enclosed CD or from the LGE website (www.lg.com).
•• Optional: You can download and install the latest version from the LGE website
(www.lg.com).
ENGLISH
CAUTION
6
Product and Button Description
How to Use the Joystick Button
ENGLISH
You can easily control the functions of the monitor by pressing the joystick button or
moving it left/right with your finger.
Basic Functions
Joystick Button / Power LED
/
•• On: Power on
•• Off: Power off
Power on
Press the joystick button once with
your finger to turn on the monitor.
Power off
Press and hold the joystick button
once with your finger to turn off the
monitor.
Volume
control
You can control the volume by moving
the joystick button left/right.
NOTE
•• The joystick button is located at the bottom of the monitor.
7
Input Connector
ENGLISH
1
VHUYLFH#RQO\
2
8
Moving and Lifting the Monitor
ENGLISH
When moving or lifting the monitor, follow these instructions to prevent the monitor
from being scratched or damaged and to ensure safe transportation, regardless of
its shape or size.
•• Place the monitor in the original box or packing material before attempting to
move it.
•• Before moving or lifting the monitor, disconnect the power cord and all other
cables.
•• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•• When holding the monitor, the screen should face away from you to prevent it
from being scratched.
•• When transporting the monitor, do not expose the monitor to shock or excessive
vibration.
•• When moving the monitor, keep it upright and never turn the monitor on its side or
tilt it sideways.
CAUTION
•• Avoid touching the monitor screen as much as possible.
-- This may result in damage to the screen or some of the pixels used to create
images.
9
ENGLISH
•• If you use the monitor panel without the stand base, its joystick button may cause
the monitor to become unstable and fall, resulting in damage to the monitor or
human injury. In addition, this may cause the joystick button to malfunction.
10
Installing the Monitor
1
ENGLISH
Assembling the Stand
CAUTION
•• To protect the screen, place the screen face down on the screen pad which is inside
the box.
2
11
3
4
ENGLISH
Cable Holder
*Assemble the Cable Holder.
Stand Body
Stand Base
5
or
12
NOTE
ENGLISH
•• Press the stand until the button reaches the top.
Installing on a Table
1 Lift the monitor and place it on the table in an upright position. Place the
monitor at least 100 mm away from the wall to ensure sufficient ventilation.
100 mm
100 mm
100 mm
CAUTION
•• Illustrations in this document represent typical procedures, so they may look
different from the actual product.
•• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when
assembling the product. (Doing so may damage the product.)
•• Applying excessive force when tightening screws may cause damage to the
monitor. Damage caused in this way will not be covered by the product warranty.
•• Do not carry the monitor upside down by just holding the base. This may cause the
monitor to fall off the stand and could result in personal injury.
•• When lifting or moving the monitor, do not touch the monitor screen. The force
applied to the monitor screen may cause damage to it.
100 mm
13
2 Connect the power adapter to the monitor and then plug the power cord into
CAUTION
•• Unplug the power cord before moving or installing the monitor. There is risk of
electric shock.
Cautions When Connecting Power Cord
3 Press the joystick button on the bottom of the monitor to turn on the monitor.
100-240 V ~
•• Make sure to use the power cord that is provided in the product package and
connect it to a grounded power outlet.
•• If you need another power cord, please contact your local dealer or the nearest
retail store.
ENGLISH
the wall outlet.
14
ENGLISH
Adjusting the Stand Height
Adjusting the Angle
1 Place the monitor mounted on the stand base in an upright position.
2 Handle the monitor with both hands for safety.
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 20° for a
comfortable viewing experience.
20
Max. 120.0 mm
WARNING
•• When adjusting the screen height, do not place your hand on
the stand body to avoid injury to your fingers.
Rear
-5
Front
15
NOTE
•• To avoid injury to the fingers when adjusting the screen, do not hold the lower part
of the monitor’s frame as illustrated below.
•• The left or right side of the monitor head can be slightly rotated up or down (up to
3°). Adjust the horizontal level of the monitor head.
20
Monitor head
-5
20
•• Be careful not to touch or press the screen area when adjusting the angle of the
monitor.
-5
ENGLISH
WARNING
16
ENGLISH
Tidying up Cables
Using the Kensington Lock
Arrange the cables using the cable holder as shown in the illustration.
The connector for the Kensington security system is located at the bottom of the
monitor.
For more information on installation and usage, refer to the Kensington lock owner’s
manual or visit the website at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
Mouse Holder
NOTE
•• The Kensington security system is optional. You can obtain optional accessories
from most electronics stores.
Cable Holder
17
Installing the Wall Mount Plate
1 Place the monitor’s screen face down. To protect the screen from scratches,
This monitor meets the specifications for the wall mount plate or other compatible
devices.
cover the surface with a soft cloth.
2 Remove the stand from the monitor by pressing the button on the bottom
center of the back of the monitor.
1 Place the screen face down. To protect the monitor panel (screen), cover the
surface with a soft cloth or the monitor protection pad included in the product
package.
2 Remove the four screws tightened on the back of the monitor.
3 Place the wall mount plate onto the monitor and align it with the screw holes.
4 Tighten the four screws using a screwdriver to fix the plate to the monitor.
NOTE
•• The wall mount plate is sold separately.
•• For more information on installation, refer to the wall mount plate’s installation
guide.
•• Be careful not to apply too much force while mounting the wall mount plate as it
may cause damage to the screen.
ENGLISH
Detaching the Stand Body
18
Installing on the Wall
ENGLISH
Install the monitor at least 100 mm away from the wall and leave about 100 mm
of space at each side of the monitor to ensure sufficient ventilation. Detailed
installation instructions can be obtained from your local retail store. Alternatively,
please refer to the manual for how to install and set up a tilting wall mounting
bracket.
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back
of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the
wall.
1 If you use screws longer than the standard length, it may damage the inside of
the product.
2 A non-VESA standard screw may damage the product and cause the monitor
to fall. LG Electronics is not liable for any accidents relating to the use of nonstandard screws.
100 mm
100 mm
100 mm
100 mm
Wall Mount (mm)
Standard screw
Number of screws
Wall Mount Plate (Optional)
100 x 100
M4 x L10
4
RW120
19
NOTE
Wall Mount Plate
Back of the Monitor
CAUTION
•• Unplug the power cord before moving or installing the monitor to avoid electric
shock.
•• Installing the monitor on the ceiling or on a slanted wall may result in the monitor
falling off, which could lead to injury. Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
•• Applying excessive force when tightening screws may cause damage to the
monitor. Damage caused in this way will not be covered by the product warranty.
Wall Mount Plate
Back of the
Monitor
Screw
Dimensions
: M4 x L10
Max. 8 mm
ENGLISH
•• Use the screws specified by VESA standards.
•• The wall mount kit includes the installation guide and all necessary parts.
•• The wall mounting bracket is optional. You can obtain optional accessories from
your local dealer.
•• The length of the screw may differ for each wall mounting bracket. Be sure to use
the proper length.
•• For more information, please refer to the user manual for the wall mounting
bracket.
•• Use the wall mounting bracket and screws that conform to VESA standards.
Damage caused by the use or misuse of inappropriate components will not be
covered by the product warranty.
•• When measured from the back of the monitor, the length of each installed screw
must be 8 mm or less.
20
ENGLISH
USING THE MONITOR
•• The following instructions are based on the 34UC89G model. Illustrations in this
manual may differ from the actual product.
Press the joystick button, go to Menu → Input, and then select the input option.
CAUTION
•• Do not press the screen for a prolonged time. This may cause image distortion.
•• Do not display a still image on the screen for a prolonged time. This may cause
image retention. Use a screensaver if possible.
Connecting to a PC
•• This monitor supports the *Plug and Play feature.
*Plug and Play: A feature that allows you to add a device to your computer without
having to reconfigure anything or install any manual drivers.
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor. Connect your
PC to the monitor using the HDMI cable as shown in the illustration below.
NOTE
•• When connecting the power cord to the outlet, use a grounded (3-hole) power
strip or a grounded power outlet.
•• The monitor may flicker when turned on in an area where the temperature is low.
This is normal.
•• Sometimes red, green, or blue spots may appear on the screen. This is normal.
(sold separately)
21
•• In HDMI input, only the RGB 4:4:4 Color Format is supported. YCbCr is not
supported.
•• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•• Use a certified cable with the HDMI logo attached. If you do not use a certified
HDMI cable, the screen may not display or a connection error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/TM cable
-- High-Speed HDMI®/TM cable with Ethernet
DisplayPort Connection
Transmits digital video and audio signals from your PC to the monitor. Connect the
monitor to your PC using the DisplayPort cable as shown in the illustration below.
DP OUT
NOTE
•• There may be no video or audio output depending on the DP (DisplayPort) version
of the PC.
•• Make sure to use the supplied DisplayPort cable of the product. Otherwise, this
may cause the device to malfunction.
•• For using Mini DP to DP (Mini DisplayPort to DisplayPort) cable, it is recommended
that you use DisplayPort 1.2 cable.
ENGLISH
CAUTION
22
ENGLISH
Connecting AV Devices
Connecting Peripherals
HDMI Connection
USB Cable connection
HDMI transmits digital video and audio signals from your AV device to the monitor.
Connect your AV device to the monitor using the HDMI cable as shown in the
illustration below.
The USB port on the product functions as a USB hub.
To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC.
Peripheral devices connected to the USB IN port can be controlled from the PC.
(sold separately)
AV
NOTE
•• In HDMI input, only the RGB 4:4:4 Color Format is supported. YCbCr is not
supported.
•• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility
issues.
•• Use a certified cable with the HDMI logo attached. If you do not use a certified
HDMI cable, the screen may not display or a connection error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/TM cable
-- High-Speed HDMI®/TM cable with Ethernet
(sold separately)
23
Connecting Headphones
NOTE
Connect peripherals to the monitor via the headphones port. Connect as illustrated.
(sold separately)
NOTE
(sold separately)
CAUTION
•• Peripheral devices are sold separately.
•• If you use angled earphones, it may cause a problem with connecting another external
device to the monitor. Therefore, it is recommended to use straight earphones.
Angled
Straight
Cautions When Using a USB Device
•• A USB device with an automatic recognition program installed, or that uses its own
driver, may not be recognized.
•• Some USB devices may not be supported or may not work properly.
•• It is recommended to use a USB hub or hard disk drive with power supplied. (If the
power supply is not adequate, the USB device may not be recognized properly.)
•• Depending on the audio settings of the PC and external device, headphones and
speaker functions may be limited.
ENGLISH
•• Make sure to install the most recent Windows OS service pack before using the
product.
•• Peripheral devices are sold separately.
•• A keyboard, mouse, or USB device can be connected to the USB port.
•• Quick Charge is available through the USB1 and USB2 port.
•• When the Monitor is gone to Power off, Quick Charge is not available.
•• The charging speed may vary depending on the device.
24
Service only port
ENGLISH
This port is used only for "Service"
VHUYLFH#RQO\
25
Activating the Main Menu
Button
Menu Status
Main menu disabled
Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor. You can
turn off the monitor this way at any time, including when the
OSD is on.)
1 Press the joystick button on the bottom of the
monitor.
2 Move the joystick up/down ( / ) and left/right
( / ) to set the options.
3 Press the joystick button once more to exit the
main menu.
Joystick Button
Description
Main menu disabled
Adjusts the monitor volume level.
Main menu enabled
Enters the Input features.
Main menu disabled
Adjusts the monitor volume level.
Main menu enabled
Enters the Menu feature.
Main menu disabled
Displays the information on the current input.
Main menu enabled
Turns off the monitor.
Main menu disabled
Displays the information on the current input.
Main menu enabled
Enters the Game Mode feature.
ENGLISH
USER SETTINGS
26
Main Menu Features
ENGLISH
Main Menu
Power Off
Input
Close
Game Mode
Menu
Description
Input
Sets input mode.
Power Off
Turns off the monitor.
Menu
Configures the screen settings.
Game Mode
Sets the game mode for gaming.
Close
Closes the main menu.
27
User Settings
ENGLISH
Menu Settings
1
2
3
4
To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
Configure the options by moving the joystick up/down/left/right.
To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
If you want to exit the OSD menu, move the joystick to until you exit.
Game Mode
Game Adjust
Picture Adjust
Input
General
28
Menu
Description
ENGLISH
Game Mode
Changes the game mode to the one optimized for a given feature.
Game Adjust
Adjusts the Overclock, Black Stabilizer, Response Time, Cross Hair and Game Reset.
Picture Adjust
Adjusts the Brightness/Contrast, Gamma, Color Temp, R/G/B and Picture Reset.
Input
General
Input List
Selects the input mode.
Aspect Ratio
Adjusts the aspect ratio of the screen.
Sets Language, Power LED, Automatic Standby, Quick Charge, OSD Lock, Deep Sleep, Information and Reset.
CAUTION
•• Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
29
Game Mode
then enter the Menu.
Hz
2 Go to Game Mode by moving the joystick.
3 To return to the upper menu or set other menu items, move the joystick to
pressing ( ) it.
4 If you want to exit the OSD menu, move the joystick to
G-SYNC
or
until you exit.
Overclock
Black Stabilizer
Response Time
Gamer 1
Game Mode
Gamer 2
Game Adjust
FPS 1
Picture Adjust
Input
FPS 2
RTS
Reader
General
Menu > Game Mode
Game Mode
Description
Gamer 1
In this mode, users can customize elements including game-related options.
Gamer 2
Gamer 1 and Gamer 2 picture modes allow you to save two sets of customized display settings, including game-related setup
options.
FPS 1
This mode is optimized for FPS games.
FPS 2
It has a higher black stabilizer value than FPS Game 1. It is suitable for very dark FPS games.
RTS
This mode is optimized for RTS Game.
Reader
Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
ENGLISH
1 To view the OSD menu, press the joystick button at the bottom of the monitor and
30
Game Adjust
ENGLISH
1 To view the OSD menu, press the joystick button at the bottom of the monitor and
then enter the Menu.
Hz
2 Go to Game Adjust by moving the joystick.
3 To return to the upper menu or set other menu items, move the joystick to
pressing ( ) it.
4 If you want to exit the OSD menu, move the joystick to
until you exit.
or
G-SYNC
Overclock
Overclock
Game Mode
Black Stabilizer
Game Adjust
Response Time
Cross Hair
Picture Adjust
Input
General
Game Reset
Black Stabilizer
Response Time
31
Menu > Game Adjust
Game Adjust
On
Sets Overclock to a higher refresh rate than specified by the panel specification.
Off
Disables the Overclock improvement feature.
NOTE
•• After the monitor reboots, change the maximum refresh rate setting in the NVIDIA control panel.
•• If the screen display appears abnormal, turn off the Overclock setting.
•• The function can only be used through DisplayPort.
•• The Overclock function's features/performance may vary depending on the graphics card or gaming content.
•• We do not guarantee the performance of the function and are not responsible for any side effects that may occur from its activation.
You can control the black contrast to have better visibility in dark scenes.
You can easily distinguish objects on dark game screens.
Black Stabilizer
High
Sets the black stabilizer to High.
Middle
Sets the black stabilizer to Middle.
Low
Sets the black stabilizer to Low.
Off
Does not use the black stabilizer improvement feature.
ENGLISH
Overclock
Description
32
ENGLISH
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Normal.
For a fast-moving picture, it is recommended that you use Fast.
Setting to Fast may cause image sticking.
Response Time
Game Adjust
Fast
Sets the response time to fast.
Normal
Sets the response time to normal.
Slow
Sets the response time to slow.
Off
Does not use the response time improvement feature.
NOTE
•• The Response Time menu in the DP input is disabled while using the Overclock feature.
Cross Hair
Cross hair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the cross hair that
fits their gaming environment among four different cross hairs.
•• When the monitor is off or enters energy saving mode, the cross hair feature is automatically turned off.
Game Reset
Returns game to the default settings.
33
Picture Adjust
then enter the Menu.
Hz
2 Go to Picture Adjust by moving the joystick.
3 To return to the upper menu or set other menu items, move the joystick to
pressing ( ) it.
4 If you want to exit the OSD menu, move the joystick to
G-SYNC
or
until you exit.
Overclock
Black Stabilizer
Response Time
Brightness/Contrast
Game Mode
Gamma
Game Adjust
Color Temp
R/G/B
Picture Adjust
Picture Reset
Input
General
Menu > Picture Adjust
Description
Brightness/Contrast
Adjusts the color contrast and brightness of the screen.
Gamma
Custom gamma settings: Mode 1, Mode 2, Mode 3.
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image
becomes.
Color Temp
Custom
The user can adjust it to red, green, or blue by customization.
Warm
Sets the screen color to a reddish tone.
Medium
Sets the screen color to between a red and blue tone.
Cool
Sets the screen color to a bluish tone.
Picture Adjust
R/G/B
You can customize the picture color using red, green, and blue colors.
Picture Reset
Returns picture and color to the default settings.
ENGLISH
1 To view the OSD menu, press the joystick button at the bottom of the monitor and
34
Input
ENGLISH
1 To view the OSD menu, press the joystick button at the bottom of the monitor and
then enter the Menu.
Hz
2 Go to Input by moving the joystick.
3 To return to the upper menu or set other menu items, move the joystick to
pressing ( ) it.
4 If you want to exit the OSD menu, move the joystick to
G-SYNC
or
Black Stabilizer
Response Time
Input List
Game Mode
until you exit.
Overclock
Aspect Ratio
Game Adjust
Picture Adjust
Input
General
Menu > Input
Description
Input List
Selects the input mode.
Adjusts the aspect ratio of the screen.
Input
Aspect Ratio
Full Wide
Displays the video in widescreen, regardless of the video signal input.
Original
Displays video according to the aspect ratio of the video signal input.
1:1
The aspect ratio is not adjusted from the original.
NOTE
•• The display may look the same for Full Wide, Original, and 1:1 options at the recommended resolution. (2560 x 1080)
35
General
then enter the Menu.
Hz
2 Go to General by moving the joystick.
3 To return to the upper menu or set other menu items, move the joystick to
pressing ( ) it.
4 If you want to exit the OSD menu, move the joystick to
until you exit.
or
G-SYNC
Overclock
Language
Game Mode
Game Adjust
Picture Adjust
Input
General
Power LED
Automatic Standby
Quick Charge
OSD Lock
Deep Sleep
Information
Reset
Black Stabilizer
Response Time
ENGLISH
1 To view the OSD menu, press the joystick button at the bottom of the monitor and
36
ENGLISH
Menu > General
Description
Language
Sets the menu screen to the desired language.
Turns the power LED on the bottom of the monitor on or off.
Power LED
On
The power LED turns on automatically.
Off
The power LED turns off.
Automatic
Standby
Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer
for the auto-off function. (Off, 4H, 6H, and 8H)
Quick Charge is a feature that rapidly charges the device connected to the USB 3.0 port.
Quick Charge
On
Enables Quick Charge.
Off
Disables Quick Charge.
NOTE
•• The charging speed may vary depending on the device.
General
This feature disables the configuration and adjustment of menus.
OSD Lock
On
Enables OSD Lock.
Off
Disables OSD Lock.
NOTE
•• All features are disabled except Brightness/Contrast in Picture Adjust, Input, OSD Lock and Information in General.
Deep Sleep
This features turns the monitor off when there is no signal detected from the HDMI or DisplayPort input after a certain amount of
time.
On
Enables Deep Sleep.
Off
Disables Deep Sleep.
Information
The display information will be shown the resolution, refresh rate or max refresh rate, mode, input source.
Reset
Restores the default settings.
37
Nothing is displayed on the screen.
Is the monitor's power cord plugged in?
•• Check if the power cord is correctly plugged into the power outlet.
Is the power LED on?
•• Check the power cable connection and press the power button.
Is the power on and the power LED
displaying white?
•• Check that the connected input is enabled (Menu > Input).
Is the power LED blinking?
•• If the monitor is in sleep mode, move the mouse, or press any key on the keyboard, to switch the display on.
•• Check if the computer is turned on.
Is the The screen is not currently set
to the recommended resolution. If you
have no video or the screen flickers,
see the troubleshooting guide in the
product owner’s manual. message being
displayed?
•• This occurs when signals transferred from the PC (graphics card) are out of the recommended horizontal or vertical frequency
range of the monitor. Please see the Product Specification section of this manual to set the appropriate frequency.
Is the No Signal message being
displayed?
•• This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and
reconnect it.
Have you installed the display driver?
•• Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also
download the driver from our web site: http://www.lg.com.
•• Make sure to check if the graphics card supports Plug and Play function.
Some features are disabled.
Are some functions not available when
you press the Menu button?
•• The OSD is locked. Go to Menu > General and set OSD Lock to Off.
ENGLISH
TROUBLESHOOTING
38
The screen retains an image.
ENGLISH
Does image sticking occur even when the
monitor is turned off?
•• Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
•• To extend the lifetime of the monitor, use a screensaver.
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution? •• If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or
the recommended resolution.
NOTE
•• Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The number of times the screen is refreshed
per second is called vertical frequency, or refresh rate, and is represented by Hz.
•• Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle. If 1 is divided by the horizontal interval, the result is the number of horizontal
lines displayed per second. This is called horizontal frequency and is represented by kHz.
•• Check if the graphics card’s resolution or frequency is within the range allowed by the monitor and set it to the recommended (optimal) resolution Control Panel > Display >
Settings in Windows. (The settings may differ depending on the operating system (OS) you use.)
•• Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.
•• The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the
graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.
•• Some graphics cards may not support 2560 x 1080 resolution. If the resolution cannot be displayed, contact the manufacturer of your graphics card.
39
The display color is abnormal.
•• Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. (The
settings may differ depending on the operating system (OS) you use.)
Does the display color appear unstable or
monochrome?
•• Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC's graphics card.
Are there spots on the screen?
•• When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD
screen. It is not an error, nor is it related to the monitor's performance.
No sound from the headphone port.
Are images displayed using DP
(DisplayPort) or HDMI input without
sound?
•• Make sure that the headphone port connections are made properly.
•• Try increasing the volume with the joystick.
•• Set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and
Sound > Sound > set the Monitor as default device. (The settings may differ depending on the operating system (OS) you use.)
ENGLISH
Does the display appear discolored
(16 colors)?
40
ENGLISH
PRODUCT SPECIFICATION
LCD Screen
Resolution
Operating Frequency
Type
TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Color Depth
HDMI
8-bit color is supported.
DP (DisplayPort)
8-bit color is supported.
Pixel Pitch
0.312 mm x 0.310 mm
Max Resolution
2560 x 1080 @ 60 Hz (HDMI)
2560 x 1080 @ 144 Hz (DP)
2560 x 1080 @ 166 Hz (DP Overclock function: On)**
Recommended Resolution
2560 x 1080 @ 60 Hz
HDMI
Horizontal Frequency
30 kHz to 140 kHz
Vertical Frequency
24 Hz to 60 Hz
Horizontal Frequency
66 kHz to 166 kHz
Vertical Frequency
30 Hz to 144 Hz
Horizontal Frequency
66 kHz to 194 kHz
Vertical Frequency
30 Hz to 166 Hz
DP
DP (Overclock)
Input Connector
Power Sources
, DP (DisplayPort) IN, USB (
) 1/2, HDMI IN, USB UP (
)
Power Rating
19 V
Power Consumption
(Typical)
Operating Mode: 60 W (Typical)*
Sleep Mode: ≤ 0.5 W (Deep Sleep: On)
Off Mode: ≤ 0.3 W (Deep Sleep: On)
4.0 A
41
ADS-110CL-19-3 190110G, manufactured by Honor
Output: 19 V
5.79 A
Environmental Conditions
Operating Conditions
Storing Conditions
Dimensions
Weight (Without Packaging)
Temperature
0 °C to 40 °C
Humidity
Less than 80 %
Temperature
-20 °C to 60 °C
Humidity
Less than 85 %
Monitor Size (Width x Height x Depth)
With Stand
819.9 x 565.3 x 279.7 (mm)
Without Stand
819.9 x 364.5 x 87 (mm)
With Stand
8.3 kg
Without Stand
6.1 kg
Specifications are subject to change without notice.
* The Operating Mode of Power Consumption is measured with LGE test standard. (Full White pattern, Maximum resolution)
* The Power Consumption level can be different by operating condition and monitor setting.
** T he Overclock function's features/performance may vary depending on the graphics card or gaming content.
We do not guarantee the performance of the function and are not responsible for any side effects that may occur from its activation.
ENGLISH
AC/DC Adapter
42
Factory Support Mode
ENGLISH
(Preset Mode, HDMI/ DisplayPort PC)
Preset Mode
Horizontal Frequency (kHz)
640 x 480
31.469
800 x 600
37.879
1024 x 768
48.363
2560 x 1080
66.64
2560 x 1080
95.50
2560 x 1080
113.24
2560 x 1080
Vertical Frequency (Hz)
Polarity (H/V)
Remarks
59.94
-/-
HDMI/ DisplayPort
60.317
+/+
HDMI/ DisplayPort
60.0
-/-
HDMI/ DisplayPort
59.98
+/-
HDMI/ DisplayPort
84.96
+/-
DisplayPort
99.94
+/-
DisplayPort
137.22
119.95
+/-
DisplayPort
2560 x 1080
166.54
143.94
+/-
DisplayPort
2560 x 1080
194.21
165.99
+/-
DisplayPort (Overclock)
G-SYNC Monitor
•• The monitor is purposely supporting the NVIDIA G-SYNC technology and targeting NVIDIA GPU.
•• Requirement for using G-SYNC
-- Supported Interface: DisplayPort (System must support DisplayPort 1.2 directly from the GPU.)
-- Supported Graphic Card: A graphic card that supports NVIDIA’s G-SYNC is necessary.
-- Supported Version: Make sure to update the graphic card to the latest driver.
•• For more information and requirement, refer to NVIDIA website at http://www.geforce.com/hardware/technology/g-sync.
43
Power LED
LED Color
White (For a few seconds)
Sleep Mode
Off
Off Mode
Off
ENGLISH
Mode
On Mode
This device can be used in all regions. Read the owner's manual (CD) carefully and keep
it at hand. Please note that the label attached to the product provides information for
technical support.
Model
Serial No.
Download PDF

advertising