LG | 47LT55A-5B | LG 42LT55A-5B Owner’s Manual

OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
42LT55A
47LT55A
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
4
LICENSES
5
ASSEMBLING AND
PREPARING
5
Accessories
6
Optional Accessories
7
Parts and Buttons
8
Using the Mounting Cable Tie
8
Connecting the Speakers
9
Using the IR Receiver
9
Portrait Layout
10
Connecting the Media Player
11
Mounting on a Wall
13 REMOTE CONTROL
15 USING THE MONITOR
24 ENTERTAINMENT
24
Using the Network
24
- Connecting to a Wired Network
25
- Network Status
26
Using the My Media
26
- Connecting USB Storage Devices
27
- Browsing Files
28
- Viewing Movies
32
- Viewing Photos
35
- Listening to Music
37
- Viewing the Contents List
38
- DivX® VOD Guide
39
- Using PIP/PBP
41 CUSTOMIZING SETTINGS
41
Accessing Main Menus
42
- PICTURE Settings
45
- AUDIO Settings
46
- TIME Settings
47
- OPTION Settings
52
- Picture ID Settings
53
- NETWORK Settings
15
Connecting to a PC
16
- RGB Connection
16
- DVI-D Connection
17
- HDMI Connection
17
- Display Port Connection
54 MAKING CONNECTIONS
18
- IR Receiver Connection
18
- Touch USB Cable Connection
55
External Device Connection
19
Adjusting the Screen
55
- HDMI Connection
19
- Selecting an Image Mode
55
- Component Connection
19
- Customizing Image Options
56
- AV Connection
20
- Customizing PC Display Options
56
Connecting to a USB
20
Adjusting the Sound
57
LAN Connection
20
- Selecting an Sound Mode
21
- Customizing Sound Options
21
Using Additional Options
21
- Using the Input List
22
- Adjusting Aspect Ratio
58 USING THE TOUCH SCREEN
58
To Use the Touch Screen on Windows 7
58
Gestures and Settings on Windows 7
59
To Use the Touch Screen on Windows XP
TABLE OF CONTENTS
Touch Response to Windows XP
61
How to Use LG TDS
62
Precautions When Using the Touch
Screen
63 TROUBLESHOOTING
68 SPECIFICATIONS
75 IR CODES
76 CONTROLLING THE MULTIPLE
PRODUCT
76
Connecting the Cable
76
RS-232C Configurations
76
Communication Parameter
77
Command Reference List
79
Transmission / Receiving Protocol
ENG
ENGLISH
60
3
4
LICENSES
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
has passed rigorous testing to verify that it plays DivX video. Visit divx.com
for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents
: 7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
NOTE
The warranty will not cover any damages caused by using the product in an excessively dusty
yy
environment.
Avoid using the product in a high temperature and high humidity area. Moving the monitor from a
yy
environment like this to an air conditioned area may cause moisture formation inside the glass. This
moisture will be dissipate over time, which may vary depending on the operating environment.
ASSEMBLING AND PREPARING
5
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
Power Cord
IR Receiver
EXIT
ID
ON
OFF
Remote control and Batteries
USB Cable
CD (Owner's Manual,
SuperSign Program/Owner's
Manual)/ Card
Mounting Cable Tie
D-sub 15-pin signal cable
CAUTION
Do not use any unapproved or aftermarket parts or accessories to ensure the safety and product life
yy
span.
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
ENG
ENGLISH
ASSEMBLING AND PREPARING
6
ASSEMBLING AND PREPARING
Optional Accessories
ENGLISH
ENG
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
SP-2000
Speaker
Cable holder/
Cable Tie
Screws
Diameter 4.0 mm x Pitch 0.7 mm x
Length 8 mm (Included Spring Washer)
Speaker kit
Media Player
Screws
CD (Owner's Manual)/
Card
Media Player kit
NOTE
Cable holder/cable tie may not be available in some areas or for some models.
yy
Optional accessories are available for some models. If necessary, please purchase them separately.
yy
ASSEMBLING AND PREPARING
7
Parts and Buttons
ENG
ENGLISH
Buttons
Connection panel
Buttons
Description
INPUT
Changes the input source.
MENU
Accesses the main menus, or saves your input and exits the menus.
Adjust the up and down.
Adjusts the volume level.
AUTO/SET
/I
Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
Turns the power on or off.
8
ASSEMBLING AND PREPARING
ENGLISH
ENG
Using the Mounting Cable
Tie
Connecting the Speakers
First, connect the input signal cable to be used.
Insert the cable tie into the bottom hole on the
back as shown in the figure to organize cables.
1 Connect an input signal cable to use before
- Only on some models.
installing the speakers.
2 Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.
3 After installing your speakers, use holders and
cable ties to secure the speaker cables.
ASSEMBLING AND PREPARING
Portrait Layout
This allows a remote control sensor to be placed
in a custom location. It is recommended to attach
it to the location illustrated in the figure below.
To install in portrait mode, rotate the set
counterclockwise 90 degrees when looking from
the front.
NOTE
Do not attach the IR receiver to the surface
yy
of the monitor or within 50 cm of it in any
direction.
ENG
ENGLISH
Using the IR Receiver
9
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
Connecting the Media
Player
2 Attach the Media Player on the product using
1 Place a soft cloth on the table and put the
the four screws provided.
product with the screen facing downward.
Push the Media Player into the compartment to
mount it.
NOTE
Use the screws provided with the product.
yy
(Diameter 3.0 mm x Pitch 0.5 mm x Length
6.0 mm)
ASSEMBLING AND PREPARING
Mounting on a Wall
CAUTION
10 cm
10 cm
10 cm
10 cm
If you intend to mount the monitor to a wall, attach
wall mounting interface (optional parts) to the back
of the set.
When you install the monitor using the wall
mounting interface (optional parts), attach it
carefully so it will not fall.
1 Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2 If you use screw longer than standard, the
monitor might be damaged internally.
3 If you use the wrong screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
4 VESA compatible only with respect to screw
mounting interface dimensions and mounting
screw specifications.
5 Please use VESA standard as below.
785mm or greater
yy
* Fastening screw: Diameter 6.0 mm x
Pitch 1.0 mm x Length 10 mm
Disconnect the power before installing or
yy
moving the monitor. Otherwise electric shock
may occur.
If you install the monitor on a ceiling or
yy
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the monitor and void your
warranty.
Use screws and wall mounts that meet the
yy
VESA standard. Any damages or injuries by
misuse or using an improper accessory are
not covered by the warranty.
To prevent injury, this apparatus must be
yy
securely attached to the wall in accordance
with the instrallation instructions. (This only
pertains to Australia and New Zealand.)
NOTE
Use screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
yy
supplied with the wall mount.
ENG
ENGLISH
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
11
12
ASSEMBLING AND PREPARING
Securing the product to a wall (optional)
ENGLISH
ENG
(Depending on model)
1 Insert and tighten the eye-bolts, or product
brackets and bolts on the back of the product.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the product.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
yy
hang on the product.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the product securely.
Brackets, bolts and ropes are optional. You
yy
can obtain additional accessories from your
local dealer.
The illustration shows a general example of
yy
installation and may look different from the
actual product.
WARNING
If a product is not positioned in a sufficiently
yy
stable location, it can be potentially
hazardous due to falling. Many injuries,
particularly to children, can be avoided by
taking simple precautions such as:
»» Using cabinets or stands recommended
by the manufacturer of the product.
»» Only using furniture that can safely
support the product.
»» Ensuring the product is not overhanging
the edge of the supporting furniture.
»» Not placing the product on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the product to a suitable support.
»» Not standing the product on cloth or other
materials placed between the product
and supporting furniture.
»» Educating children about the dangers of
climbing on furniture to reach the product
or its controls.
REMOTE CONTROL
13
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control at the
yy
remote control sensor on the monitor.
(POWER)
Turns the Monitor on or off.
MONITOR ON / OFF
Turn off the monitor and then
turn it back on.
ENERGY SAVING
Adjusts the brightness of
the screen to reduce energy
consumption.
POWER
ARC
Selects the Aspect Ratio
Mode.
MARK
Selects a specific file in the
USB mode.
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
Number and Alphabet buttons
Enters numerical or alphabetical
characters depending on the
setting.
DEF
MNO
WXYZ
CLEAR
Deletes the entered numerical
or alphabetical character.
MARK
ARC
Volume Up / Down
Adjusts the volume level.
PSM
Selects the Picture Status
Mode.
INPUT
Selects the input mode.
INPUT
OFF
ON
1/a/A Button
Toggles between numerical
and alphabetical.
ENERGY
MONITOR
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
MUTE
Mutes all sounds.
OK
S.MENU
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.
ENG
ENGLISH
REMOTE CONTROL
14
REMOTE CONTROL
ENGLISH
ENG
MENU (See p.41)
Accesses the main menus
or saves your input and exit
menus.
Navigation buttons
Scrolls through menus or
options.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
OK
Selects menus or options and
confirms your input.
S.MENU
(SuperSign Menu Key)
Selects the SuperSign OSD
Menu.(SuperSign input only)
BACK
Allows the user to move back
one step.
EXIT
Clears all on-screen displays
and returns to Monitor
viewing from any menu.
ID ON/OFF
When the number of Picture
ID is equal to Set ID you can
control the monitor which
you want in the multi display
condition.
TILE
Selects the TILE Mode.
USB Menu control buttons
Controls media playback.
USING THE MONITOR
15
Connecting to a PC
Your Monitor supports the Plug & Play* feature.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
ENG
ENGLISH
USING THE MONITOR
CAUTION
Connect the
yy
signal input cable
and tighten it by
turning the screws
clockwise.
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the screen
yy
for a long period of time to prevent image
burn. Use a screensaver if possible.
When you use wireless equipment near the
yy
product, an image problem might occur.
NOTE
It is recommended to use the monitor with
yy
the HDMI connection for the best image
quality.
Use a shielded signal interface cable, such
yy
as D-sub 15 pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
If you turn the monitor on when the set
yy
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
16
USING THE MONITOR
ENGLISH
ENG
RGB Connection
DVI-D Connection
Transmits the analog video signal from your PC to
the Monitor. Connect the PC and the Monitor
set with the 15-pin signal cable as shown the
following illustrations.
Select RGB input source on the monitor.
Transmits the digital video signal from your PC to
the Monitor. Connect the PC and the Monitor
set with the DVI cable as shown the following
illustrations.
Select DVI-D input source on the monitor.
Macintosh Adapter
(not included)
(not included)
(not included)
(not included)
DVI OUT
NOTE
Use the standard
yy
Macintosh adapter since
an incompatible adapter
is available in the market.
(Different signaling system)
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
AUDIO OUT
USING THE MONITOR
17
Display Port Connection
Transmits the digital video and audio signals from
your PC to the monitor. Connect the PC and the
monitor with the HDMI cable as shown in the
following illustrations.
Select HDMI input source.
Transmits the digital video and audio signals from
your PC to the monitor. Connect the PC and the
monitor with the display port cable as shown in the
following illustrations.
Select display port input source.
(not included)
(not included)
HDMI
DP OUT
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
If you want to use HDMI PC mode, you must
yy
set PC/DTV to PC mode.
When HDMI PC is used, a compatiblity
yy
problem might occur.
ENG
ENGLISH
HDMI Connection
18
USING THE MONITOR
ENGLISH
ENG
IR Receiver Connection
Touch USB Cable Connection
Allows the use of a wired remote or IR receiver
extension.
Plug a USB cable into the Touch USB port on the
back of the monitor.
PC
NOTE
Make sure the power cable is disconnected.
yy
USING THE MONITOR
Customizing Image Options
Selecting an Image Mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images in its optimized settings by
selecting one of the preset image modes.
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the navigation buttons to scroll to
PICTURE and press OK.
3 Press the navigation buttons to scroll to
Picture Mode and press OK.
4 Press the navigation buttons to scroll to an
image mode you want and press OK.
Mode
Vivid
2 Press the navigation buttons to scroll to
PICTURE and press OK.
3 Press the navigation buttons to scroll to
Picture Mode and press OK.
4 Press the navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust the following options, and
then press OK.
Description
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for a normal
environment.
Cinema
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and
dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast
gaming screen such as PCs or games.
5 When you are finished, press EXIT.
When you return to the previous menu,
press BACK.
Option
Description
Backlight
djusts the brightness of the screen
A
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright parts of the
picture are saturated.
Brightness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark areas of the picture are
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter colors
such as red, or set to cool to make
picture bluish.
Advanced
Customizes the advanced options.
Refer to the Advanced image options.
Control
Picture Reset
Restores the options to the default
setting.
6 When you are finished, press EXIT.
When you return to the previous menu,
press BACK.
ENG
ENGLISH
Adjusting the Screen
19
20
USING THE MONITOR
ENGLISH
ENG
Customizing PC Display Options
Adjusting the Sound
Customize options of each image mode for the
best image quality.
This function works in the following mode:
yy
RGB[PC] mode.
Selecting an Sound Mode
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the navigation buttons to scroll to
2 Press the navigation buttons to scroll to AUDIO
3 Press the navigation buttons to scroll to Screen
3 Press the navigation buttons to scroll to Sound
4 Select and adjust following options, and then
4 Press the navigation buttons to scroll to a
PICTURE and press OK.
and press OK.
press OK.
Option
Description
This monitor has 5 preset sound modes to
compliment different types of video content.
and press OK.
Mode and press OK.
sound mode you want and press OK.
Mode
Description
Resolution
Selects a proper resolution. See
Customizing PC display options.
Standard
Select when you want standard-quality
sound.
Auto
Adjusts the screen position, clock, and
phase automatically.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sport
Select when you watch sport events.
Game
Selects when you play games.
Config.
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
shaky. Run Auto Config. before adjusting
these.
Reset
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu,
press BACK.
5 When you are finished, press EXIT.
When you return to the previous menu,
press BACK.
USING THE MONITOR
Using Additional Options
You may customize options of each sound mode
for the best sound quality.
Using the Input List
1 Press MENU to access the main menus.
1 Press INPUT to access the Input List.
2 Press the navigation buttons to scroll to AUDIO
and press OK.
3 Press the navigation buttons to scroll to Sound
2 Press the navigation buttons to scroll to one of
the input mode and press OK.
Input source
Description
AV
Watch video from a VCR or other
external devices.
4 Press the navigation buttons to scroll to a
Component
Watch content from a DVD or other
external devices, or through a
digital set-top box
5 Select and adjust following options, and then
RGB
View a PC display on the screen
HDMI
Watch content from a PC, DVD
or Digital set-top box other high
definition devices.
DVI-D
Watch content from a PC, DVD
or Digital set-top box other high
definition devices.
Display Port
Watch content from a PC, DVD
or Digital set-top box other high
definition devices.
SuperSign
Views the Media Player display on
the screen.
USB
Plays the multimedia file saved in
the USB.
Mode and press OK.
sound mode you want and press OK.
press OK.
Option
Description
Infinite
Sound
LG's Infinity Sound option provides
5.1 channel stereo sound from two
speakers.
Treble
Increases the intensity of the low
frequency part of the audio.
Bass
Makes the output sound softer.
Increasing the bass extends the low
frequency range of the output.
Reset
Resets the sound mode to the default
setting.
6 When you are finished, press EXIT.
When you return to the previous menu,
press BACK.
ENG
ENGLISH
Customizing Sound Options
21
22
USING THE MONITOR
Adjusting Aspect Ratio
ENGLISH
ENG
Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set.
CAUTION
If a fixed image displays on the screen for a long period of time, it will be imprinted and become
yy
a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the
warranty.
To prevent image sticking, do not play a still image for more than two hours.
yy
If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area
yy
of the screen.
Recommended operation time for optimum performance and reliability is 12 hours or less per day.
yy
When using the touch screen monitor, it is recommended to set the screen aspect ratio to Just Scan.
yy
NOTE
You can also change the image size by accessing the main menus.
yy
The Just Scan mode operates when a video signal has resolution of 720p or higher.
yy
MODE
RGB
Display
Port
DVI-D
HDMI
SuperSign
AV
Component
PC
DTV
PC
DTV
PC
DTV
PC
PC
16:9
o
o
o
o
o
o
o
o
o
o
Just Scan
x
o
x
o
x
o
x
o
x
x
1:1
x
x
o
x
o
x
o
x
o
o
ARC
4:3
o
o
o
o
o
o
o
o
o
o
Zoom
o
o
x
o
x
o
x
o
x
x
Cinema Zoom
o
o
x
o
x
o
x
o
x
x
USING THE MONITOR
- Just Scan: This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- 4:3: This selection will allow you to view a picture
with an original 4:3 aspect ratio, black bars will
appear on both the left and right of the screen.
- Zoom: This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1: The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
- Cinema Zoom: Choose Cinema Zoom when you
want to enlarge the picture in correct proportion.
Note: When enlarging or reducing the picture,
the image may become distorted.
ENG
ENGLISH
- 16:9: This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
23
24
ENTERTAINMENT
ENGLISH
ENG
ENTERTAINMENT
Using the Network
Connecting to a Wired Network
Connect the display to a local area network (LAN)
via the LAN port as shown in the following illustration and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet provider or router manual.
To set up the network seetings: (Even if your display has already connected automatically, running
setup again will not harm anything),
1 Press MENU to access the main menus.
2 Press the navigation buttons to scroll to NETWORK and press OK.
3 Press the navigation buttons to select Network
Setting and press OK.
4 If you already set network setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
-If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses will need to be input manually.
-IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
Internet
CAUTION
yy
Do not connect a modular phone cable to the
LAN port.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
yy
Network setting menu will not be available
until the display is connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENTERTAINMENT
NOTE
Tips for Network setting
yy
Use a standard LAN cable with this display. Cat5
or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or disconnect the power cable of the home network router
or cable modem. Then power on and/or connect
the power cable again.
yy
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable
terms of service. For details, contact your ISP.
yy
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow for
such a connection, you will not be able to connect the display.
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices you
can connect at the same time. (If your ISP limits
sub-scription to one device, this display may
not be allowed to connect when a PC is already
connected.)
yy
The use of a Router may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Network Status
1 Press MENU to access the main menus.
2 Press the navigation buttons to scroll to NETWORK and press OK.
3 Press the navigation buttons to select Network
Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after setting the network.
Return to the previous menu.
ENG
ENGLISH
yy
If you want to access the Internet directly on
your display, the internet connection should
always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yy
If you do not complete the network settings,
the network may not work properly.
25
26
ENTERTAINMENT
Using the My Media
ENGLISH
ENG
Connecting USB Storage Devices
You can connect USB storage devices such as a
USB flash memory or external hard drive to the
display and use multimedia features .
Connect a USB flash memory or USB memory
card reader to the display as shown on the following illustration. The My media screen appears.
or
CAUTION
yy
Do not turn the display off or remove a USB
storage device while the EMF(my media)
Menu is activated, as this could result in
loss of files or damage to the USB storage
device.
yy
Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
Tips for using USB storage devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition programme may not be recognized.
yy
A USB storage device which uses its own
driver may not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
yy
Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files or movie files.
yy
Please use only a USB storage device which
was formatted as a FAT32 file system or
NTFS file system provided with the Windows operating system. In case of a storage
device formatted as a different utility program
which is not supported by Windows, it may
not be recognized.
yy
Please connect power to a USB storage device (over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable offered by the device maker.
yy
Some USB storage devices may not be supported or operated smoothly.
yy
File alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
yy
Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
27
ENTERTAINMENT
yy
It is recommended to use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
yy
Only a USB memory stick can be used to
play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
yy
Only an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
yy
A USB 3.0 storage device may not work.
Browsing Files
ENG
ENGLISH
yy
If the USB HDD does not have an external
power source, the USB device may not be
detected. Connect to an external power
source.
- Use a power adaptor for an external power
source. We do not guarantee a USB cable
for an external power source.
yy
If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
yy
If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yy
If the USB memory device does not work
properly, disconnect and reconnect it.
yy
How fast a USB memory device is detected
differs from device to device.
yy
If the USB is connected in Standby Mode,
specific hard disk will automatically be
loaded when the display is turned on.
yy
The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
yy
Any device with more than the recommended
capacity may not work properly.
yy
If a USB external hard disk with a Energy
Saving function does not work, turn the
hard disk off and on again to make it work
properly.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy
Maximum of 999 folders or files can be recognized under one folder.
Access the photo, music, or movie lists, and
browse files.
1 Connect a USB storage device.
2 Press MENU to access the main menus.
3 Press the navigation buttons to scroll to My
Media and press OK.
4 Press the navigation buttons to choose from
Movie List, Photo List, Music List
or Contents List and press OK.
Movie List
Photo List
Music List
2
1
Page 1/1
Photo List
USB External
001
002
010
011
Contents List
Drive1
Page 1/1
003
004
005
006
012
013
014
015
Move
To Music List
Change Numbers
007
View
008
Page
Mark Mode
009
4
5
Page Change
Exit
3
No.
Description
1
Moves to upper level folder
2
Current page/Total pages
Corresponding buttons on the
remote control
Current page/ total pages of
contents under the folder
4
focused on 1
Contents under the folder
5
focused on 1
Buttom
Description
3
Green
button
Yellow
button
Blue
button
Press the green button to toggle between
Photo List -> Music List, Music List ->
Contents List, Contents List -> Movie
List or Movie List -> Photo List.
A method to view in 5 large thumbnail or
simple list.
Convert to Mark Mode.
28
ENTERTAINMENT
Supported File Formats
ENGLISH
ENG
Type
Movie
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
Movie (*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Video format: DivX3.11, DivX4.12, DivX5.x,
DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03,
Xvid1.10 beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Audio format: Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format: *.smi/*.srt/*.sub(
MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Photo
Supported file format
File Extensions: *.cts/ *.cse
Movie
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6,
Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xwvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
Audio format: MP2,MP3,Dolby Digital, LPCM,
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
File
Item
Profile
Extensions
Photo JPEG
JPG
jpeg
jpg
jpe
supported
file format
photo size
supported
file format
yy SOF0:
baseline
yy SOF1: Extend
Sequential
yy SOF2:
Progressive
Photo size
yy Min: 64 x 64
yy Max Type:
1366 x 768
Bit rate
32 kbps to 320
kbps
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
PNG
BMP
Internal Subtitle format: only, XSUB (It is the
subtitle format used in DivX6 files)
JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
yy You can play JPEG files only.
yy Non-supported files are displayed in the form
of predefined icon.
File
Item
Profile
Extensions
Music
Type
Content
(when
using
SuperSign
Manager)
Music MP3
Sampling
rate
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
yy SOF0:
baseline
yy SOF1: Extend
Sequential
yy SOF2:
Progressive
yy Min: 64 x 64
yy Max-Normal
Type:
yy 15360 (W) x
8640 (H)
yy Progressive
Type:
yy 1920 (W) x
1440 (H)
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
Viewing Movies
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
MP3
Bit rate 32 to 320
yy Sampling rate MPEG1 Layer3: 32 kHz, 44.1
kHz, 48 kHz
yy Sampling rate MPEG2 Layer3: 16 kHz, 22.05
kHz, 24 kHz
yy Sampling rate MPEG2.5 Layer3: 8 kHz,
11.025 kHz, 12 kHz
1 Press the navigation buttons to scroll to
My Media and press OK.
2 Press the navigation buttons to scroll to
Movie List and press OK.
3 Press the navigation buttons to scroll to a
folder you want and press OK.
4 Press the navigation buttons to scroll to a file
you want and press OK.
ENTERTAINMENT
Drive1
001
002
005
006
Page 1/1
003
004
Move
Change Numbers
ENG
ENGLISH
USB1 USB Drive
To Photo list
6 Control playback by using the following buttons.
Page 1/1
Movie List
29
Page
Play
Page Change
01:02:30 / 02:30:25
Option
Exit
Mark Mode
Hide
Exit
Page 1/1
Movie List
Mark Mode
Drive1
USB1 USB Drive
001
002
005
Page 1/1
003
004
Button
051. Apple_ ......
02:30:25
006
Description
Stops the playback
Plays a video
Pauses or resumes the playback
Scans backward in a file
Move
Play Marked
Mark All
Unmark All
Play
Exit Mark Mode
Page
Scans forward in a file
Page Change
Exit
Show the Option menu.
Hide the menu on the full-sized screen.
Menu
Play Marked
Description
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Mark All
Mark all movie files on the screen.
Unmark All
Deselect all marked movie files.
Exit Mark Mode Exit the Mark Mode.
5 Play a movie.
NOTE
yy
Non-supported files are displayed the preview
image by icon only .
yy
Abnormal files are displayed in the form of
bitmap .
Return to Movie List.
Skips to specific points in a file during playback. The time of a specific
or
point will appear on the status bar. In
some files, this function may not work
ENERGY
SAVING
properly.
Adjusts the screen brightness to save
energy.
30
ENTERTAINMENT
Tips for using playing video files
ENGLISH
ENG
yy
Some user-created subtitles may not work
properly.
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
Movie files produced with some encoders
may not be played correctly.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
HD videos with a maximum of 1920 x 1080
@ 25/30 P or 1280 x 720 @ 50/60 P are
supported, depending on the frame.
yy
Videos with resolutions higher than 1920
X 1080 @ 25/30 P or 1280 x 720 @ 50/60
P may not work properly depending on the
frame.
yy
Movie files other than the specified types and
formats may not work properly.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yy
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
not supported for playback.
yy
A DivX movie file and its subtitle file must be
located in the same folder.
yy
A video file name and its subtitle file name
must be identical for it to be displayed.
yy
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
yy
Files encoded with GMC (Global Motion
Compensation) may not be played.
When you are watching the movie by Movie
yy
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Video options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
yy
When replaying the video file after stopping,
you can play from where it stopped previously.
ENTERTAINMENT
When you select the Set Video Play,,
the Picture Size, Audio Language, Subtitle
Language or Repeat.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
Latin2
Latin4
Cyrillic
Menu
Picture Size
Audio
Language
Subtitle
Language
Language
Code Page
Sync
Position
Size
Repeat
Description
Selects your desired picture
format during movie play.
Changes the Language Group of the
audio during movie play. Files
with a single audio track cannot be
selected.
Turn on/off the subtitle.
Activated for SMI subtitle and
can select the language within the
subtitle.
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
Changes the position of the
subtitle either up or down during
movie play.
Selects your desired Subtitle size
during movie play.
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
is turned off, it can run the playback if
the file name is similar to the previous
file.
Greek
Korean
Support Language
English, Spanish, French,
German, Italian, Swedish, Finnish,
Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic,
Welsh, Irish, Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Slovak, Slovenian, Serbian,
Hungarian
Estonian, Latvian, Lithuanian
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Greek
Korean
NOTE
yy
Only 10,000 of sync blocks can be supported within the subtitle file.
yy
When playing a video, you can adjust the
Picture Size by pressing the ARC button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
ENG
ENGLISH
1 Press the navigation buttons to scroll to show
Code Page
Latin1
31
32
ENTERTAINMENT
When you select the Set Video,
ENGLISH
ENG
1 Press the navigation buttons to scroll to make
appropriate adjustments.
Page 1/1
Photo List
USB1 USB Drive
001
Drive1
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
When you select the Set Audio,
007
Move
Change Numbers
To Music List
View
009
Page
Page Change
Exit
Mark Mode
1 Press the navigation buttons to scroll to show
the Sound Mode, Clear Voice II, or Balance.
008
Page 1/1
Photo List
Mark Mode
USB1 USB Drive
Drive1
Page 1/1
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
011
003
004
005
006
012
013
014
015
007
Move
Viewing Photos
View Marked
Mark All
Unmark All
View
008
Page
Exit Mark Mode
009
Page Change
Exit
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
View Marked
Display the selected photo file.
1 Press the navigation buttons to scroll to My
Mark All
Mark all photo files on the screen.
Unmark All
Deselect all marked photo files.
Media and press OK.
2 Press the navigation buttons to scroll to Photo
List and press OK.
3 Press the navigation buttons to scroll to a
folder you want and press OK.
Menu
Description
Exit Mark Mode Exit the Mark Mode.
5 View photos.
4 Press the navigation buttons to scroll to a file
you want and press OK.
NOTE
yy
Non-supported files are displayed the preview image by icon only .
yy
Abnormal files are displayed in the form of
bitmap .
ENTERTAINMENT
6 When playing a video, you can set the
Option
ENERGY
SAVING
Option
Description
Adjusts the screen brightness to save
energy.
yy Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
yy TransitionEffect: Set the view mode
of the slideshow.
yy BGM: Selects a music folder for the
background music.
NOTE
yyYou cannot change the music
folder while the background
music is playing.
yyYou can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Slideshow
Options
Option
BGM
Hide
Exit
Number of selected photos
Option
Description
Slideshow Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos saved in the current folder display
during a slideshow.
Select Option to set the speed and view
mode of the slideshow.
BGM
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust Option by MENU button
on the remote control.
Rotate
Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
Zoom
Enlarges the image to 200% or 400%.
NOTE
yyZoom to 200% or 400% only
work for image of 1372×772
pixel size or larger.
yyFor image of 960×540 pixel
size or larger, only zoom to
400% works properly.
Hide
Hides the option window.
To display the options, press OK.
EXIT
Return to Photo List.
Photo options
1 Press MENU to show the Option menus.
2 Press the Navigation buttons to scroll to Set
Photo View, Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
ENG
ENGLISH
following:
33
34
ENTERTAINMENT
When you select the Set Photo View,
ENGLISH
ENG
1 Press the Navigation buttons to scroll to select Slide Speed, Transition Effect, or BGM.
2 Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide.
Fade In
The current photo disappears and the next photo appears slowly.
ENTERTAINMENT
When you select the Set Video,
35
Listening to Music
appropriate adjustments.
1 Press the navigation buttons to scroll to
My Media and press OK.
2 Press the navigation buttons to scroll to Music
When you select the Set Audio,
1 Press the navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
List and press OK.
3 Press the navigation buttons to scroll to a folder
you want and press OK.
4 Press the navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play
Change Numbers
To Movie List
Page
Page Change
Exit
Mark Mode
Page 1/1
Music List
Mark Mode
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play Marked
Menu
Play Marked
Mark All
Unmark All
Mark All
Mark
Unmark All
Page Change
Exit
Description
Display the selected music file.
Mark all music files on the screen.
Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
Page
Exit Mark Mode
ENG
ENGLISH
1 Press the navigation buttons to scroll to make
36
ENTERTAINMENT
6 When listening to music, you can set the
Tips for playing music files
ENGLISH
ENG
following:
Music List
3 file(s) Marked
004. - B04.mp3
00:00
Drive1
005. - B05.mp3
00:00
006. - B06.mp3
00:00
Page 1/1
007. - B07.mp3
00:00
005. - B05.mp3
NOTE
008. - B08.mp3
00:00
02:30 / 03:25
Play with Photo
Button
This unit doesn't support the ID3 Tag
yy
embedded MP3 files.
Page 1/1
Option
Hide
Exit
Description
Stops playing back the file and moves
back to the Music List.
Plays a music file
Pauses or resumes playback
Skips to the next file
Skips to the previous file
or
When playing,
When you press the
button, the previous music file will be played.
Green
button
ENERGY
SAVING
Option
Hide
EXIT
or
When you press the
button, the next
music file will be played.
Start playing the selected music files and
then move to the Photo List.
Adjusts the screen brightness to save
energy.
Show the Option menu.
Hides the option window.
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
yy
Non-supported files are displayed the preview image by icon only .
yy
Abnormal files are displayed in the form of
bitmap .
yy
A damaged or corrupted music file does not
play but displays 00:00 in playtime.
yy
A music download from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
yy
If you press OK,
buttons, screen saver is
stopped.
yy
The PLAY( ), Pause( ),
,
,
buttons on the remote control are also available
in this mode.
yy
You can use the
button to select the next
music and the
button to select the previous music.
file name
002. B02.mp3
00:31 / 04:04
Time elapsed /Duration
ENTERTAINMENT
Music options
2 Press the navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
When you select the Set Audio Play.,
Viewing the Contents List
Plays back the stored files using the Export option
in SuperSign Manager.
1 Press the navigation buttons to scroll to My
Media and press OK.
2 Press the navigation buttons to scroll to Contents List and press OK.
3 Press the navigation buttons to scroll to a
folder you want and press OK.
4 Press the navigation buttons to scroll to a file
you want and press OK.
test1.cts
07/01/2011
1 Press the navigation buttons to scroll to select
Page 1/1
Contents List
USB1 USB Drive
Drive1
Page 1/1
test2.cts
07/01/2011
test3.cts
07/01/2011
test4.cts
07/01/2011
test5.cts
07/01/2011
the Repeat or Random.
Move
2 Press the navigation buttons to scroll to make
To Movie List
Change Numbers
Play
Page
Page Change
Exit
appropriate adjustments.
NOTE
When you select the Set Audio,,
1 Press the navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
yy
While playing media files from Contents List,
only the BACK, EXIT, or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
yy
If there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
ENG
ENGLISH
1 Press MENU to access the Pop-Up menus.
37
38
ENTERTAINMENT
DivX® VOD Guide
ENGLISH
ENG
DivX® VOD Registration
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
1 Press MENU to access the main menus.
2 Press the navigation buttons to scroll to MY
MEDIA and press OK.
3 Press the Blue button.
4 Press the navigation buttons to scroll to DivX
Reg. Code and press OK.
5 View the registration code of your display.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device
to play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
NOTE
yy
While you are checking the registration code,
some buttons may not work.
yy
If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
Product.
yy
The video or audio files that are not converted by the standard DivX codec may be
corrupted or not be played.
yy
The DivX VOD code allows you to activate
up to 6 devices under one account.
ENTERTAINMENT
DivX® VOD Deregistration
1 Press MENU to access the main menus.
Using PIP/PBP
Videos or pictures stored on the USB device can
be displayed on a single monitor by dividing them
into the main and subscreens.
2 Press the navigation buttons to scroll to MY MEDIA and press OK.
1 Press MENU to access the main menus.
3 Press the Blue button.
4 Press the navigation buttons to scroll to Deactivation and press OK.
5 Press the navigation buttons to select Yes to
confirm.
2 Press the navigation buttons to scroll to OPTION and press OK.
3 Press PIP/PBP to select PIP or PBP and then
press OK.
PIP/PBP
Mode
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
Yes
Move
Prev.
Off
Position
PIP
Size
PBP
No
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
Once the deregistration is executed, you
yy
must register your device again to see
DivX® VOD contents.
4 Select Movie List or Photo List from My
Media. (With PIP/PBP selected, the Music
List and Contents List are deactivated.)
Movie List
Photo List
Music List
Contents List
ENG
ENGLISH
You should deregister your device with 8 digit DivX
deregistration code from your device at www.divx.
com/vod.
39
40
ENTERTAINMENT
5 Select a file you want and then press OK.
7 For sound select either Main or Sub. You must
ENGLISH
ENG
to select the output sound before running the
PIP or PBP function.
Page 1/1
Movie List
Drive1
USB1 USB Drive
001
002
005
006
Page 1/1
003
004
051. Apple_ ...
02:30:25
Select the sound path.
Main
Move
Change Numbers
To Photo list
Play
Page
Sub
Page Change
Exit
Mark Mode
8 The sub screen is displayed on the main screen.
6 Select the PIP or PBP icon from the play list.
01:02:30 / 02:30:25
Exit
Hide
Option
MOVIE LIST
2/13
Slideshow
BGM
PHOTO LIST
Option
Hide
Exit
41
CUSTOMIZING SETTINGS
Accessing Main Menus
MARK
ARC
PSM
MENU
1 Press MENU to access the main menus.
E
AUTO
BACK
TILE
ID
ON
OFF
3 Press the navigation buttons to scroll to the setting or option you want
and press OK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.42)
Adjusts the image size,
quality, or effect.
PICTURE
OPTION
S.MENU
OK
2 Press the navigation buttons to scroll to one of the following menus and
press OK.
OPTION (See p.47)
Customizes the general
settings.
P
BRIGHT A
NESS G
MUTE
AUDIO (See p.45)
Adjusts the sound quality,
effect, or volume level.
AUDIO
NETWORK
TIME
MY MEDIA
NETWORK (See p.53)
Sets up the network
setting.
TIME (See p.46)
Sets the time, date, or
Timer feature.
MY MEDIA (See p.26)
Display and play movie,
photo and music content
stored on your USB.
EXIT
ENG
ENGLISH
CUSTOMIZING SETTINGS
42
CUSTOMIZING SETTINGS
PICTURE Settings
PICTURE
Move
ENGLISH
ENG
1 Press MENU to access the main menus.
Aspect Ratio
Energy Saving
: Off
2 Press the navigation buttons to scroll to PICTURE and
press OK.
Easy Brightness Control
: Off
OK
: 16:9
Smart Energy Saving : Off
Picture Mode
3 Press the navigation buttons to scroll to the setting or
: Standard
Backlight
option you want and press OK.
70
Contrast 100
Brightness 50
-To return to the previous level, press BACK.
Sharpness 50
4 When you are finished, press EXIT.
Color
When you return to the previous menu, press
BACK.
60
Tint
0
R
G
Color Temp. 0
W
C
Advanced Control
Picture Reset
Screen
The available picture settings are described in the following:
Setting
Aspect Ratio
Description
Changes the image formatting.
Adjusts the screen brightness corresponding to the surroundings.
Energy Saving Level
Easy
Brightness
Control
Off
Disables Energy Saving function
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen off
The screen turns off in 3 seconds.
Adjusts the backlight according to the schedule you set.
Mode
Off
Disables Easy Brightness Control.
On
Enables Easy Brightness Control.
NOTE
yyEasy Brightness Control is disabled if the current time is not set.
yyIf Energy Saving is set to Maximum, Easy Brightness Control is disabled.
yyYou can set up to six schedules and they will be sorted in time ascending order.
yyIf more than six schedules are added, the latest schedule will be automatically deleted.
yyYou can delete a schedule by pressing the OK button.
yyDuplicate schedules are not added, but the backlight value changes.
yyIt may not be supported depending on the model.
Smart Energy
Saving
Adjusts the backlight and contrast depending on the screen brightness.
Level
Off
Disables the Smart Energy Saving function.
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
CUSTOMIZING SETTINGS
Setting
Description
Selects one of the preset image or customizes options in each mode for the best Monitor screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the monitor .
Mode
SCREEN
(In RGB
Mode Only)
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for a normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Game
Optimizes the video image for fast moving video such as PCs or games.
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See "Customizing PC display options."
Auto Config.
Adjusts the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky. Run Auto Config. before adjusting these.
Reset
Restores all options to the default setting.
Picture Mode options
Setting
Description
Backlight
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp.
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options. Refer to the Advanced image options.
Picture Reset
Restores the options to the default setting.
NOTE
If the Picture Mode setting in the Picture menu is set to Vivid, Standard, Cinema, Sport, or Game
yy
the subsequent menus will be automatically set.
You cannot adjust color and sharpness in the RGB/DVI-PC/HDMI-PC/Display Port-PC mode.
yy
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
ENG
ENGLISH
Picture Mode
43
44
CUSTOMIZING SETTINGS
Advanced Control
ENGLISH
ENG
Setting
Description
Dynamic Contrast
(Off/High/Medium/Low)
Adjusts the contrast to keep it at the best level according to the brightness of the screen.
The picture is improved by making bright parts brighter and dark parts darker.
(Function works in the following mode - AV, Component, HDMI-DTV, DVI-DTV, Display PortDTV)
Dynamic Color
(Off/High/Low)
Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue, green and white look more vivid.
(Function works in the following mode - AV, Component, HDMI-DTV, DVI-DTV, Display PortDTV)
Clear White
(Off/High/Low)
Make the white area of screen brighter and more white.
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
(Off/High/Medium/Low)
educes screen noise without compromising video quality.
R
(Function works in the following mode - AV, Component, HDMI-DTV, DVI-DTV, Display PortDTV)
Digital Noise Reduction This option reduces the noise produced while creating digital video signals.
(Off/High/Medium/Low)
Gamma
(High/Medium/Low)
Set your own gamma value. On the monitor, high gamma values display whitish images and
low gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - AV, Component, HDMI-DTV, DVI-DTV, Display PortDTV)
45
CUSTOMIZING SETTINGS
AUDIO Settings
AUDIO
Clear Voice II
2 Press the navigation buttons to scroll to AUDIO and press
Sound Mode
OK
: Off
Balance
0
L
R
: Standard
OK.
Infinite Sound : Off
Treble 50
3 Press the navigation buttons to scroll to the setting or
Bass
option you want and press OK.
50
Reset
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
Digital Audio Input
: Audio In
Speaker
: On
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others, it helps users to hear human voices better.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
The most commanding and natural audio.
Music
Select this option to enjoy the original sound when listening to
the music.
Cinema
Select this option to enjoy sublime sound.
Sport
Select this option to watch sports broadcasting.
Game
To enjoy dynamic sound when playing a game.
NOTE
yyIf sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
Option
Infinite Sound
Infinity Sound option provides 5.1 channel stereo sound from two
speakers.
Treble
Controls the dominant sounds in the output. When you turn up
the treble, it will increase the output to the higher frequency
range.
Bass
Makes the output sound softer. When you turn up the bass, it will
increase the output to the lower Frequency range.
Reset
Resets the sound mode to the default setting.
Digital Audio
Input
HDMI/Display Port: Outputs the sound of digital signal from HDMI/ Display Port through the
monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI/ Display Port to
the Audio In port.
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
ENG
ENGLISH
1 Press MENU to access the main menus.
Move
46
CUSTOMIZING SETTINGS
TIME Settings
TIME
Move
ENGLISH
ENG
1 Press MENU to access the main menus.
Clock
2 Press the navigation buttons to scroll to TIME and press OK.
Off Time
: Off
On Time
: Off
Sleep Timer
: Off
Power On Delay
: Off
Auto Off
: 15 min.
Automatic Standby
: Off
3 Press the navigation buttons to scroll to the setting or option
you want and press OK.
-To return to the previous level, press BACK.
OK
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
Off/On Time
Sets the time to turn on or off the monitor.
Sleep Timer
Sets the length of time until the Monitor to turns off. When you turn the monitor off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on
individually to prevent overload.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
yyOff Time/On Time can be saved for up to seven schedules; the monitor is turned on or off at the preset
time in the schedule list. If multiple preset times are stored in the schedule list, this function works at the
nearest time from the current time.
yyOnce the on or off time is set, these functions operate daily at the preset time.
yyThe scheduled power-off function works properly only when the device time is set correctly.
yyWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the
power-on time if the set is turned on, and vice versa if the set is turned off.
CUSTOMIZING SETTINGS
OPTION Settings
OPTION
Move
Language
2 Press the navigation buttons to scroll to OPTION and press
ISM Method
: Normal
DPM Select
: 5sec
Fail Over
: Off
OK.
OK
Factory Reset
3 Press the navigation buttons to scroll to the setting or option
Set ID
you want and press OK.
Tile Mode
-To return to the previous level, press BACK.
PIP/PBP
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
:1
Key Lock
: Off
Interface Select
: RS232C
PC Power Control
: Not connected
USB Content Recovery : Off
Product/Service Info.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a burn-in image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
DPM Select
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent burn-in images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen, the
screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
A user can choose to turn the power saving mode on / off.
NOTE
yyYou can set Energy Saving to Off or set the length of time before entering Energy Saving
mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
yyIt makes a little difference according to your environment.
yyIt may not be supported depending on the model.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
mode
Off
Stops auto switch of the input source.
Auto
Attempts to find another input source having video signal according to the
defined input order if no video signal comes from the current input source.
(Refer to the sequence of the table below.)
Current
Input Source
Attempt 1
Attempt 2
RGB
HDMI
DVI
DP
DVI
HDMI
DP
RGB
HDMI
DVI
DP
RGB
HDMI
DVI
RGB
DP
Manual
Attempt 3
Attempt 4
If there is no available
video signal to switch to,
then the current input
source remains.
The input source changes according to the specified order.
If there is no video signal from the specified input source, then the current input
source remains.
ENG
ENGLISH
1 Press MENU to access the main menus.
47
48
CUSTOMIZING SETTINGS
Setting
Description
ENGLISH
ENG
Factory Reset
Select this option to return to the default factory settings.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Tile Mode
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB/DVI Cable and
distributor.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of one by one Display.
Auto Config.
Adjusts the screen position automatically.
The displayed image may be unstable for a few seconds while the configuration
is in progress.
PC Position
Moving the screen position horizontally and vertically.
PC Size
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release a tile.
All Tile setting are released when selecting tile recall and the screen returns to
full screen.
NOTE
yyIf Tile Mode is enabled, Smart Energy Saving will be disabled to provide the same picture
quality as other displays.
yyThe touch screen feature is limited while using Tile Mode.
CUSTOMIZING SETTINGS
Setting
Description
Videos or photos stored on the USB device can be displayed on a single monitor by dividing them
into the main and subscreens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Adjusts the position of the subscreen (top left, bottom left, top right, bottom
right) The default value is inthe bottom right.
Size
Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size:
0) is 480x270; the maximum size (Size: 10) is 960x540.
NOTE
yyThe Position and Size options are enabled only in PIP mode.
Key Lock
Turns the local key function on or off. If Key Lock is enabled, the local key does not work.
Interface Select
Sets communication with Media Player and the connected PC.
Option
RS232C
Communicates with the connected PC in serial mode.
SuperSign
Communicates with Media Player.
PC Power Control Controls the power of the monitor with Media Player turned on.
Mode
Not connected
This mode is displayed when the Media Player is not connected.
Off
You can turn on or off the whole system.
On
You can turn on or off the monitor while the Media Player is turned on.
Always On
When you turn on the monitor while the Media Player is turned off, the Media
Player is turned on.
USB Content
Recovery
Replays the content in a USB when the power is back on if it is turned off during playing a
content. (This function operates the same when a USB is disconnected and connected again.)
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address, and
home page.
ENG
ENGLISH
PIP/PBP
49
50
CUSTOMIZING SETTINGS
Tile Mode
Tile Mode - Natural mode
ENGLISH
ENG
This monitor can be tiled with additional monitors
to create a large tiled display.
Off
When the Tile Mode
option is disabled
When active, the part of the image that would
normally be displayed in the gap between the
monitors is omitted.
1X2
When using 2 monitors
Before
ID 2
ID 1
Tile ID
3X3
When using 9 monitors
2X2
When using 4 monitors
ID 1
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
4X4
When using 16 monitors
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID 10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
5X5
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID 10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
After
CUSTOMIZING SETTINGS
PIP/PBP
NOTE
yyThe subscreen is only supported when using the
USB device.
Sub
Mode
*PIP (Picture In Picture): Displays the subscreen
in the main screen.
*PBP (Picture By Picture): Displays the subscreen
next to the main screen.
Sub
screen
Main
screen
PIP
PBP
Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
top left
top right
bottom left
bottom right
Size
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0:
480x270
< 1920x1080 >
USB
Main
AV
X
Component
O
RGB
O
HDMI/ DVI-D/ DP
O
yyYou can change only the size and position in PIP
mode.
yyWith PBP selected, the Aspect Ratio option in the
PICTURE menu is disabled (Fixed as 16:9).
yyWhile running the PIP/PBP function, the Tile Mode
function does not work.
yyYou must select the output sound before running
the PIP or PBP functions. (Select either Main or
Sub.)
yyIf you fail to select Main or Sub from the sound
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
yyYou cannot change the sound while running the
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
yyThe picture quality of the subscreen is set
according to the values selected in the main menu,
not the USB device.
yyEven when the power is turned off or on, if the
USB device is connected, the PIP/PBP mode plays
again from where it left off.
yyIf you play videos you selected in PIP/PBP mode,
the videos will play back repeately in succession.
yyThe buttons below work in PIP mode.
Button
Photo
Movie
ENG
ENGLISH
Displays videos or photos stored in the USB device
on a single monitor by dividing it into the main and
sub screens.
51
52
CUSTOMIZING SETTINGS
Picture ID Settings
ENGLISH
ENG
Picture ID is used to change the settings of a
specific display using a single IR receiver for
multi-vision. Communication is possible between
a monitor with an IR receiver and other monitors
using RS232C cables. Each monitor is identified
by a Set ID. If you assign the Picture ID using
the remote control, only displays with the same
Picture ID and Set ID can be controlled remotely.
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
3 If you press the left/right buttons or the red ON
button for PICTURE ID repeatedly, the Picture
ID toggles between OFF and 1 to 4. Assign the
Set ID as you like.
Picture ID
◄
Off
►
REMOTE
CONTROL IN
Close
1 Assign the Set ID to the installed monitors as
shown below:
A set with a different Set ID than the Picture
yy
ID cannot be controlled by IR signals.
Please refer to the Installation Manual for
yy
more information on the assigning Total Set
ID.
IR Receiver
RS232C cable
Picture ID
Off
Close
2X2 Multi-Vision (Total Set ID: 4)
Set IDs are assigned as shown in the picture.
2 Press the ON (Red) button on the remote control to assign the PICTURE ID.
NOTE
If Picture ID is set to 2, the upper right
yy
monitor, that has a Set ID of 2, can be
controlled by IR signals.
If you press the green OFF button for
yy
PICTURE ID, the Picture IDs for all monitors
are turned off. If you then press any button
on the remote control, all monitors can be
controlled by IR signals regardless of Set ID.
The Picture ID function may not work while
yy
MY MEDIA is operating.
53
CUSTOMIZING SETTINGS
NETWORK Settings
NETWORK
Move
Player Name Setting
2 Press the navigation buttons to scroll to NETWORK and
Network Setting
: None
Network Status
: Not connected
press OK.
3 Press the navigation buttons to scroll to the setting or option
Server IP Setting
Server IP Status
: Not connected
you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Network Setting
Configure the network settings.
Network Status
Display the network status.
- Internet is connected: Extermally connected
- Home network is connected: Only internally connected
- Not connected: When there is no network connection
Server IP Setting
Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected: When there is no network connection with SuperSign server
- Waiting for approval: When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected: When network connection with SuperSign server has been made, but access to server
has been rejected by the server
- Internet is connected: When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
ENG
ENGLISH
1 Press MENU to access the main menus.
OK
54
MAKING CONNECTIONS
ENGLISH
ENG
MAKING CONNECTIONS
Connect various external devices to the ports on the monitor set’s back panel.
1 Find an external device you want to connect to your monitor set shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
AV
COMPONENT
HDMI
DVI-D
DVD
AV
COMPONENT
HDMI
DVI-D
VCR
AV
COMPONENT
HDMI
DVI-D
USB
Speaker
Touch USB
PC
RGB
HDMI
DVI-D
Display Port
LAN
Camcorder/Camera
AV
COMPONENT
HDMI
DVI-D
Gaming device
AV
COMPONENT
HDMI
NOTE
If you connect a gaming device to the monitor set, use the cable supplied with the gaming device.
yy
It is recommended you to use the optional speaker provided.
yy
MAKING CONNECTIONS
55
Component Connection
Connect a HD receiver, DVD, or VCR player to the
monitor and select an appropriate input mode.
Transmits the analog video and audio signals
from an external device to the monitor. Connect
the external device and the monitor with the 15pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
HDMI Connection
Transmits the digital video and audio signals from
an external device to the monitor. Connect the
external device and the monitor with the HDMI
cable as shown on the following illustration.
(not included)
(not included)
(not included)
HDMI
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
ENG
ENGLISH
External Device Connection
56
MAKING CONNECTIONS
ENGLISH
ENG
AV Connection
Connecting to a USB
Transmits the analog video and audio signals
from an external device to the monitor. Connect
the external device and the monitor with the 15
pin signal to RCA cable as shown on the following
illustration.
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the monitor and
access the USB menu to use various multimedia
files.
or
(not included)
(not included)
MAKING CONNECTIONS
57
LAN Connection
ENG
ENGLISH
A Connect PC to monitor directly.
LAN
Monitor
PC
B Using a router (Switch)
LAN
Monitor
Switch
Network
PC
C Using the Internet.Network
LAN
Network
Monitor
PC
58
USING THE TOUCH SCREEN
ENGLISH
USING THE TOUCH SCREEN
To Use the Touch Screen on
Windows 7
Plug a USB cable into the Touch USB port on the
back of the monitor.
Then, connect the USB cable to your PC so that it
automatically recognizes the touch screen monitor.
PC
Go to Control Panel > System and Security >
System. You will see the number of touch-points
supported under Pen and Touch.
CAUTION
Once your PC recognizes the monitor, you
yy
will be able to use the touch screen.
NOTE
The monitor can respond to 10 Touch Points
yy
when connected to a Windows 7 computer.
When using the touch screen monitor, it is
yy
recommended to set the screen aspect ratio
to Just Scan.
For more information about gestures and
yy
settings on Windows 7, refer to Windows
Help.
Gestures and Settings on
Windows 7
For information about gestures and settings on
Windows 7, refer to the Windows Help.
USING THE TOUCH SCREEN
59
Plug a USB cable into the Touch USB port on the
back of the monitor.
Then, connect the USB cable to your PC so that it
automatically recognizes the touch screen monitor.
PC
CAUTION
Once your PC recognizes the monitor, you
yy
will be able to use the touch screen.
You can see the details of the current touch screen
on the Device Manager window. Go to Control
Panel > System > Hardware > Device Manager >
Human Interface Devices.
You can see LGE MultiTouch Device on the USB
Human Interface Device Properties window.
ENGLISH
To Use the Touch Screen on
Windows XP
60
USING THE TOUCH SCREEN
ENGLISH
Touch Response to
Windows XP
Touch: Mouse click (action)
Long-press: Mouse right click (context menu)
* The touch screen monitor is optimized for
Windows 7.
NOTE
The monitor can respond to one Touch Point
yy
when connected to a Windows XP computer.
When using the touch screen monitor, it is
yy
recommended to set the screen aspect ratio
to Just Scan.
The touch function only works for the screen
yy
that is set as the primary monitor. Go to
Control Panel > Display > Settings > Use this
device as the primary monitor.
USING THE TOUCH SCREEN
61
How to Use LG TDS
. Long-press Touch
W
hether to enable the mouse's right click
function (context menu), when you touch and
hold the screen.
- Enable: Enables the mouse's right click function
(context menu) when a long-touch is applied.
-D
isable: Disables the mouse's right click
function (context menu)
 Current Display Settings
Displays the current screen information.
 Screen Rotation
Touch screen rotation settings
NOTE
LG TDS is only supported in Windows XP.
yy
You must install .NET Framework 3.5 on
yy
Windows XP before installing this program.
Landscape
*Portrait mode supports only a 90˚
counterclockwise screen rotation.
- Landscape: No rotation
-P
ortrait: 90˚ rotation counterclockwise
Portrait
ENGLISH
LG TDS is required to enable portrait mode and
the long-touch on Windows XP.
62
USING THE TOUCH SCREEN
Precautions When Using the Touch Screen
ENGLISH
CAUTION
The monitor is optimized for indoor use.
yy
The touch screen monitor is optimized for Windows 7.
yy
Do not remove the USB cable when using the touch screen monitor.
yy
Use LG TDS (Touch Display Settings) provided with the monitor to set touch coordinates when
yy
rotating the monitor connected to a Windows XP computer.
The LG TDS provided with the monitor only supports the following graphic cards: nVidia, AMD (ATI)
yy
and Intel.
If touch does not respond, remove the USB cable and connect it back in ten seconds.
yy
Touch responds when the monitor is powered on.
yy
Up to 10 touch-points are supported when the monitor is connected to a Windows 7 computer; one
yy
when connected to a Windows XP computer.
Set the monitor as the primary monitor in Windows XP.
yy
Touch accuracy is optimized by using full screen mode.
yy
Your action may not work properly on the edge area of the touch screen.
yy
If the 10 touch-points are not detected, restart your PC. (Windows 7)
yy
The touch operation (e.g. touches count, gesture, etc.) may vary depending on the content.
yy
The spot that you try to touch and the one which is actually touched on the screen may differ
yy
depending on the angle you view the monitor screen.
TROUBLESHOOTING
63
No image is displayed
Problem
Is the product power cord
connected?
Does the 'Out of range'
message appear?
oes the 'Check signal cable'
D
message appear?
Resolution
yy See if the power cord is properly connected to the outlet.
yy The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB, HDMI, DVI-D, Display Port : 1920 x 1080 @ 60 Hz
yy The signal cable between PC and product is not connected. Check
the signal cable.
yy Press the 'INPUT' menu in the remote control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
yy See if the plug&play function is supported by referring to the video
card user manual.
ENG
ENGLISH
TROUBLESHOOTING
64
TROUBLESHOOTING
'Key Lock On' message appears.
ENGLISH
ENG
Problem
The 'Key Lock On' message
appears when pressing the
Menu button.
Resolution
The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
The screen image looks abnormal.
Problem
Resolution
Is the screen position wrong?
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Position] in OSD menu.
yy See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
yy D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Size] in OSD menu.
Horizontal noise appears or the yy D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Phase] in OSD menu.
The screen is displayed
yy The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
After-image appears on the
product.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
yy When a dark image is displayed on the screen after an image with
high contrast (black and white or gray), this may cause image sticking.
This is normal for LCD screen.
TROUBLESHOOTING
65
Problem
No sound?
Resolution
Sound is too dull.
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Adjust the Clear Voice ll, Treble and Bass appropriately.
Sound is too low.
yy Adjust the volume.
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
Screen color is unstable or
yy Check the connection status of the signal cable. Or, re-insert the PC
mono-colored.
video card.
Do black spots appear on the
yy Several pixels (red, green, white or black color) may appear on the
screen?
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Resolution
yy Is the sleep timer set?
yy Check the power control settings. Power interrupted
ENG
ENGLISH
The audio function does not work.
66
TROUBLESHOOTING
I have a problem with touch response.
ENGLISH
ENG
Problem
Touch does not respond.
Resolution
yy Check the USB cable connection.
- This may occur when the USB cable between PC and monitor is not
connected. Check the USB cable and make it firmly connected.
* Check the connection on Windows 7
Control Panel > System and Security > System
- Check the number of touch-points supported under Pen and Touch.
* Check the connection on Windows XP
Go to Control Panel > System > Hardware > Device Manager >
Human Interface Devices.
You need to be able to see LGE MultiTouch Device on the USB
Human Interface Device Properties window.
yy Check the PC power.
- This may occur when the PC is powered off. Make sure that your
PC's power cord is firmly plugged into a power outlet.
yy Restart your PC.
- Touch may not respond when the system is down due to the unstable
network. Reconnect the LAN cable or restart your PC.
yy Check the signal cable connection.
- If your PC and monitor are not connected using a signal cable, touch
does not respond. Check the signal cable connection.
yy Check the monitor power.
- Touch may not respond when the monitor is powered off.
yy Check if the screen is currently on.
The location of a touch does
yy Change your tablet PC settings (Windows 7).
not correspond to the touch
- This may occur when the touch screen is not calibrated properly.
coordinates.
Control Panel > Hardware and Sound > Tablet PC Settings > Display
> Display options > Calibrate or Reset
* For information about gestures and settings on Windows 7, refer to
the Windows Help.
yy Change the display setting to Full Screen (Windows XP).
-O
n Windows XP, rotation of touch coordinates works only in full
screen mode.
* Refer to help of the graphic card installed on your PC.
yy When using HDMI, set the Input Label to PC.
Touch coordinates appear to be yy Change the Screen Rotation setting with LG TDS.
rotated 90 degrees (Windows
-R
un the LG TDS provided with the monitor and set to Landscape or
XP).
Portrait.
I cannot start LG TDS.
yy Check whether the operating system is Windows XP.
- LG TDS is supported only in Windows XP.
yy Please install .NET Framework 3.5.
- You can download it at Microsoft Download Center.
TROUBLESHOOTING
I cannot use 10 touch points in
Windows 7.
Resolution
yy Change your tablet PC settings (Windows 7).
- This may occur when the touch screen is not calibrated properly.
Go to Control Panel > Hardware and Sound > Tablet PC Settings >
Display > Display options > Calibrate or Reset
yy Set the monitor as the default monitor (Windows XP).
- This may occur if the monitor is not set as the default monitor when
you are using multiple monitors.
Go to Control Panel > Display > Settings tab > Select the monitor >
Use this device as the primary monitor (U) > Apply (A)
yy Make sure that you use a content that supports up to 10 touch points.
- The content played (e.g. Flash Player, Paint, etc.) may not support
10 touch points.
yy Remove the USB cable and connect it again in 10 seconds.
yy Run the content (e.g. Flash Player, Paint, etc.) again.
yy Restart your PC.
yy If the gap between two touch points is 15 mm or less, a touch error
may occur.
yy On the edge of the touch screen, 10 touch points may be less reliable.
ENG
ENGLISH
Problem
touch is applied to a monitor
A
other than the one I intended.
67
68
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
42LT55A
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
1067.31 mm Wide TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size: 1067.31 mm
0.4845 mm (H) x 0.4845 mm (V)
RGB: 1920 X 1080 @ 60 Hz
HDMI,DVI-D, Display Port: 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB: 1920 X 1080 @ 60 Hz
HDMI,DVI-D, Display Port: 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Power
Rated Voltage
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB: 30 kHz to 83 kHz
HDMI,DVI-D, Display Port: 30 kHz to 83 kHz
RGB : 50 Hz to 57 Hz
HDMI,DVI-D, Display Port: 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
RGB, HDMI, DVI-D, Display Port, RS-232C, LAN, USB,
Audio, Touch USB
- Connect a 15-pin D-Sub cable to the RGB port to use an
AV or a component input.
AC 100-240 V~ 50/60 Hz 1.6 A
On Mode: 115 W Typ.
Sleep Mode: ≤ 0.7 W
Off Mode: ≤ 0.5 W
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
ENG
ENGLISH
Dimensions
(Width x Height x
Depth) / Weight
990.9 mm x 585.0 mm x 72.0 mm / 20.5 kg
990.9 mm x 585.0 mm x 99.8 mm / 21.3 kg
* Touch Screen
OS (Operating
System)
1 Point
Windows XP
Windows 7
10 Points
Space between touches: at least 15 mm or more
* Applicable only for models that support the speakers
Audio
69
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
70
SPECIFICATIONS
47LT55A
ENGLISH
ENG
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
1192.87 mm Wide TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size: 1192.87 mm
0.5415 mm (H) x 0.5415 mm (V)
RGB: 1920 X 1080 @ 60 Hz
HDMI,DVI-D, Display Port: 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB: 1920 X 1080 @ 60 Hz
HDMI, DVI-D, Display Port: 1920 X 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Power
Power rating
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB: 30 kHz to 83 kHz
HDMI,DVI-D, Display Port: 30 kHz to 83 kHz
RGB: 50 Hz to 57 Hz
HDMI,DVI-D, Display Port: 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
RGB, HDMI, DVI-D, Display Port, RS-232C, LAN, USB,
Audio, Touch USB
- Connect a 15-pin D-Sub cable to the RGB port to use an
AV or a component input.
AC 100-240 V~ 50/60 Hz 1.8 A
On Mode: 120 W Typ.
Sleep Mode: ≤ 0.7 W
Off Mode: ≤ 0.5 W
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
ENG
ENGLISH
Dimensions
(Width x Height x
Depth) / Weight
1102.7 mm x 647.8 mm x 71.2 mm / 23.8 kg
1102.7 mm x 647.8 mm x 99.2 mm / 24.6 kg
* Touch Screen
OS (Operating
System)
1 Point
Windows XP
Windows 7
10 Points
Space between touches: at least 15 mm or more
* Applicable only for models that support the speakers
Audio
71
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
72
SPECIFICATIONS
Dimensions
42LT55A
(Unit: mm)
51.2
990.9
17.7
17.7
44.5
585
17.7
17.7
400
295.5
400
92.5
295.5
92.5
ENGLISH
ENG
The illustrations in this manual may differ from the actual product and accessories.
Please see the "Mounting on a wall" section for sizes of screws.
[Wall Mount Screw]
4-M6, L12.5 (Max)
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
72
SPECIFICATIONS
73
Dimensions
ENG
ENGLISH
The illustrations in this manual may differ from the actual product and accessories.
Please see the "Mounting on a wall" section for sizes of screws.
47LT55A
(Unit: mm)
49.6
1102.7
17.7
17.7
44.5
647.8
71.2
17.7
17.7
400
351.4
123.9
400
123.9
351.4
[Wall
[Wall
[Wall
[Wall
[Wall
Mount
Mount
Mount
Mount
Mount
Screw]
Screw]
Screw]
Screw]
Screw]
4-M6,
4-M6,
4-M6,
4-M6,
4-M6,
L10
L10
L10
L10
L10
(Max)
(Max)
(Max)
(Max)
(Max)
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
74
SPECIFICATIONS
DTV Mode
RGB (PC) supported mode
ENGLISH
ENG
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 350
31.469
70.8
720 x 400
31.468
70.8
640 x 480
31.469
59.94
800 x 600
37.879
60.317
832 x 624
49.725
74.55
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
HDMI/ DVI/ Display Port (PC)/ SuperSign
supported mode
Resolution
Horizontal
Vertical
Frequency (kHz) Frequency (Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
Resolution
Component
HDMI/
Display Port
(DTV)
480i
o
x
576i
o
x
480p
o
o
576p
o
o
720p
o
o
1080i
o
o
1080p
o
o
NOTE
PC resolutions available as the input label
yy
option in RGB and HDMI/DVI/Display Port
input mode: 640 x 480 / 60 Hz, 1280 x
720 / 60 Hz, 1920 x 1080 / 60 Hz and DTV
resolutions: 480p, 720p, 1080p.
NOTE
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
IR CODES
75
IR CODES
ENG
ENGLISH
All models do not support the HDMI/USB function.
yy
Some key codes are not supported, depending on the model.
yy
Code (Hexa)
Function
Note
02
Volume
R/C BUTTON
03
Volume
R/C BUTTON
06
Right ►
R/C BUTTON
07
Left ◄
R/C BUTTON
08
R/C BUTTON
Power
09
MUTE
R/C BUTTON
28
BACK
R/C BUTTON
32
1/a/A
R/C BUTTON
40
Up ▲
R/C BUTTON
41
Down ▼
R/C BUTTON
43
MENU
R/C BUTTON
44
OK
R/C BUTTON
61
Blue Key
R/C BUTTON
63
Yellow Key
R/C BUTTON
71
Green Key (PICTURE ID OFF) R/C BUTTON
72
Red Key (PICTURE ID ON)
R/C BUTTON
79
MARK ARC
R/C BUTTON
95
ENERGY SAVING
R/C BUTTON
99
AUTO
R/C BUTTON
0B
INPUT
R/C BUTTON
10 to 19
Number Key 0 to 9
R/C BUTTON
2F
CLEAR
R/C BUTTON
3F
S.MENU
R/C BUTTON
4D
PSM
R/C BUTTON
5B
EXIT
R/C BUTTON
7B
TILE (Tile Mode)
R/C BUTTON
8E
R/C BUTTON
8F
R/C BUTTON
B0
R/C BUTTON
B1
R/C BUTTON
BA
R/C BUTTON
C4
MONITOR ON
C5
MONITOR OFF
R/C BUTTON
E0
BRIGHTNESS
(Page UP)
R/C BUTTON
E1
BRIGHTNESS
(Page Down)
R/C BUTTON
R/C BUTTON
76
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 99 without being duplicated.
yy
Connecting the Cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
Monitor 1
PC
Monitor 2
Monitor 3
Monitor 4
RS-232C Cable (not included)
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
PC
D-Sub 9
(Female)
Set
D-Sub 9
(Female)
Communication Parameter
Baud Rate: 9600 buad Rate (UART)
yy
Data Length: 8 bit
yy
Parity Bit: None
yy
Stop Bit: 1bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
3-Wire Configurations (Not Standard)
PC
D-Sub 9
(Female)
Set
D-Sub 9
(Female)
CONTROLLING THE MULTIPLE PRODUCT
77
Command Reference List
DATA
(Hexadecimal)
2
01. Power
k
a
00 to 01
02. Input Select
x
b
Refer to ‘Input Select.’
03. Aspect Ratio
k
c
Refer to ‘Aspect Ratio.’
04. Energy Saving
j
q
Refer to ‘Energy Saving.’
05. Picture mode
d
x
Refer to ‘Picture mode.’
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Sharpness
k
k
00 to 64
09. Color
k
i
00 to 64
10. Tint
k
j
00 to 64
11. Color Temperature
x
u
00 to 64
12. H Position
f
q
00 to 64
13. V Position
f
r
00 to 64
14. H Size
f
s
00 to 64
15. Auto configuration
j
u
01
16. Balance
k
t
00 to 64
17. Sound mode
d
y
Refer to ‘Sound mode.’
18. Treble
k
r
00 to 64
19. Bass
k
s
00 to 64
20. Speaker
d
v
00 to 01
21. Volume Mute
k
e
00 to 01
22. Volume Control
k
f
00 to 64
23. Time 1(Years/ Months/ Days)
f
a
Refer to ‘Time 1.’
24. Time 2(Hours/ Minutes/Seconds)
f
x
Refer to ‘Time 2.’
25. Off Timer(Repeat mode/ Time)
f
e
Refer to ‘Off Timer.’
26. On Timer(Repeat Mode/ Time)
f
d
Refer to ‘On Timer.’
27. On Timer Input
f
u
Refer to ‘On Timer Input.’
28. Sleep Time
f
f
00 to 08
29. Power On Delay
f
h
00 to 64
30. Automatic Standby
m
n
00 to 01
31. Auto Off
f
g
00 to 01
32. Language
f
i
Refer to ‘Language.’
33. Power Indicator(Standby Light)
f
o
00 to 01
34. Power Indicator(Power Light)
f
p
00 to 01
35. ISM mode
j
p
Refer to ‘ISM Method.’
36. Fail Over Select
m
i
00 to 02
37. Fail Over Input Select
m
j
Refer to ‘Fail Over Input Select.’
38. Reset
f
K
00 to 02
ENG
ENGLISH
COMMAND
1
78
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
COMMAND
DATA
(Hexadecimal)
1
2
39. Tile Mode
d
d
00 to 01
40. Tile Mode Check
d
z
FF
41. Tile ID
d
i
Refer to ‘Tile ID.’
42. Tile H Position
d
e
00 to 32
43. Tile V Position
d
f
00 to 32
44. Tile H Size
d
g
00 to 32
45. Tile V Size
d
h
00 to 32
46. Natural Mode (In Tile mode)
d
j
00 to 01
47. DPM Select
f
j
00 to 01
48. FAN Control
d
o
00 to 03
49. FAN Fault Check
d
w
FF
50. Temperature Value
d
n
FF
51. Remote Lock/ key Lock
k
m
00 to 01
52. Key
m
c
Refer to ‘Key.’
53. OSD Select
k
l
00 to 01
54. Elapsed time return
d
l
FF
55. Serial No. Check
f
y
FF
56. S/W Version
f
z
FF
57. White Balance Red Gain
j
m
00 to FE
58. White Balance Green Gain
j
n
00 to FE
59. White Balance Blue Gain
j
o
00 to FE
60. Backlight
m
g
00 to 64
61. PC Power Control
d
t
00 to 01
62. PC Power
d
s
00 to 01
63. Easy Brightness Control Mode
m
s
v
00 to 01
65. Status check
s
s
s
66. BLU Maintenance
m
t
00 to 01
67. Screen mute
k
d
00 to 01
64. Easy Brightness Control Schedule
Refer to ‘Easy Brightness Control Schedule.’
Refer to ‘Status check.’
Note : During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c)
yy
are not executed and treated as NG.
Some commands are not supported depending on the model.
yy
The ‘f f’ command which shows the status of a certain command does not display the OSD as the
yy
result in order to be compatible with SuperSign program.
CONTROLLING THE MULTIPLE PRODUCT
79
Transmission / Receiving Protocol
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0 x 00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0 x 0D’.
* [ ]: ASCII code space ‘0 x 20’
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* When the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is
in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the
data that is sent from the PC.
* If a command is sent with Set ID '00' (=0 x 00), the data is reflected to all monitor sets and they do send any
acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
* Some commands are not supported depending on the model.
ENG
ENGLISH
Transmission
80
CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
To control the Power On/Off the display.
ENGLISH
ENG
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Only when the monitor set is fully powered on, the
Acknowledgement signal is returned properly.
* There may be a certain time of delay between the
Transmission and Acknowledgement signals.
04. Energy Saving (Command: j q)
To set the Energy Saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03. Maximum
04: Auto
05. Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
02. Input Select (Command: x b)
To select the Input Source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: Input (AV)
40: Component
60: RGB
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(HDMI1)(DTV)
A0: HDMI(HDMI1)(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
91: HDMI2/SDI(DTV)
A1: HDMI2/SDI(PC)
B0: SuperSign
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
05. Picture Mode (Command: d x)
To select the Picture Mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported
depending on the model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
02: 16:9
04: Zoom
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
09: Just scan (720p or more)
(Component, HDMI/ DVI-D/ Display Port DTV)
* RGB, DVI-D, HDMI/Display Port PC mode (1:1)
10 to 1F: Cinema Zoom 1 to 16
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
* Available data types differ depending on the input
signal. For more information, see the aspect ratio
section of the owner's manual.
* The aspect ratio may differ depending on the
model's input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
07. Brightness (Command: k h)
To adjust the screen brightness.
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
To adjust the screen sharpness.
* This function is available only in AV/Component
input.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust the screen color.
* This function is available only in AV/Component
input.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
To adjust the screen tint.
* This function is available only in AV/Component
input.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint R50 to G50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
To adjust the screen Color Temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
12. H Position (Command: f q)
To adjust the screen Horizontal Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. -50 (Left) to max. 50 (Right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
81
82
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
13. V Position (Command: f r)
To adjust the screen Vertical Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
16. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to 64: min. -50 (Bottom) to max. 50 (Top)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
14. H Size (Command: f s)
To adjust the screen Horizontal Size.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data 00 - 64: Min. -50 (Reduce) - Max. 50 (Expand)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Auto Configuration (Command: j u)
To adjust the picture position and minimize image
shaking automatically.
(Only available for RGB-PC input.)
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
To select the Sound Mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sport
05. Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
To adjust the Treble values.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
19. Bass (Command: k s)
To adjust the Bass values.
Data 00 to 64: Bass 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
To select the speaker on/off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
22. Volume Control (Command: k f)
To set the playback volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
23. Time 1(Year/ Month/ Day) (Command: f a)
To set the Time 1(Year/ Month/ Day) values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 100 to 14: 2010 to 2030
Data 201 to 0C: January to December
Data 301 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1(Year/
Month/ Day) values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
21. Volume Mute (Command: k e)
To control the Volume Mute on/off.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Mute (Volume Off)
01 : Current volume (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
24. Time 2(Hour/ Minute/ Second) (Command: f x)
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 17: 00 to 23 hours
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2(Hour/
Minute/ Second) values.
** This command won’t work if Time 1(Year/ Month/
Day) has not been set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENG
ENGLISH
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
83
84
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
25. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat Mode/ Time) function.
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st Off Time data
F2: Read the 2nd Off Time data
F3: Read the 3rd Off Time data
F4: Read the 4th Off Time data
F5: Read the 5th Off Time data
F6: Read the 6th Off Time data
F7: Read the 7th Off Time data
2. E1-E7 (Delete one index), E0 (Delete all indexes)
E0: Delete all Off Time data
E1: Delete the 1st Off Time data
E2: Delete the 2nd Off Time data
E3: Delete the 3rd Off Time data
E4: Delete the 4th Off Time data
E5: Delete the 5th Off Time data
E6: Delete the 6th Off Time data
E7: Delete the 7th Off Time data
3. 01 to 0C (Set the day of week for Off Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fe 01 f1 ff ff - Read the 1st Off Time
data.)
(Example 2: fe 01 e1 ff ff - Delete the 1st Off Time
data.)
(Example 3: fe 01 04 02 03 - Set the Off Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st On Time data
F2: Read the 2nd On Time data
F3: Read the 3rd On Time data
F4: Read the 4th On Time data
F5: Read the 5th On Time data
F6: Read the 6th On Time data
F7: Read the 7th On Time data
2. E1-E7 (Delete one index), E0 (Delete all indexes)
E0: Delete all On Time data
E1: Delete the 1st On Time data
E2: Delete the 2nd On Time data
E3: Delete the 3rd On Time data
E4: Delete the 4th On Time data
E5: Delete the 5th On Time data
E6: Delete the 6th On Time data
E7: Delete the 7th On Time data
3. 01 to 0C (Set the day of week for On Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fd 01 f1 ff ff - Read the 1st On Time
data.)
(Example 2: fd 01 e1 ff ff - Delete the 1st On Time
data.)
(Example 3: fd 01 04 02 03 - Set the On Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
Data (Add schedule)
20: Input (AV)
40: Component
60. RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
Data1 (Change schedule)
1. F1 to F7 (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component
60: RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
* To read the schedule input, enter FFH for [Data2].
If no schedule is available for [Data1] when
attempting to read or change the schedule data, the
text NG will be displayed and the operation fails.
(Example 1: fu 01 60 - Move each schedule input
down one row and save the 1st schedule input in
RGB mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule
input.)
(Example 3: fu 01 f3 20 - Change the 3rd data
schedule input to the current On Time and AV input.
If there is no third schedule, the text NG will be
displayed and the operation fails.)
* This function is supported only when 1 (Year/
Month/Day), 2 (Hour/Minute/Second), On Time
(Repeat Mode/Time) are set.
** It may not be supported depending on the model.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
28. Sleep Time (Command: f f)
To set the Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00: Off (Sleep Timer off)
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on. (Unit: Second)
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to max. 100 (sec.)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
30. Automatic Standby (Command: m n)
To set the Automatic Standby function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 4 hours)
01: 4 Hours (Off after 4 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
27. On Timer Input (Command: f u)
To select an external input for the current On Time
setting and add a new schedule or change the
existing schedule.
85
86
CONTROLLING THE MULTIPLE PRODUCT
31. Auto Off (Command: f g)
To set the Auto Off function.
ENGLISH
ENG
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 15 minutes)
01: 15 min.(Off after 15 minutes)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
To set the language for OSD.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish (EU)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese (Cantonese)
34. Power Indicator (Power Light) (Command: f p)
To set the Power Indicator (Power Light) function.
Transmission
[f][p][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
35. ISM mode (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08. Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
33. Power Indicator (Standby Light) (Command: f o)
To set the Power Indicator (Standby Light) function.
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
36. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[ ][Data4][ ][Data5][Cr]
Data 1 to 5 (Priority 1 to 5)
60: RGB
70: DVI-D
90: HDMI(HDMI1)
C0: Display Port
91: HDMI2/SDI
* The number of data items differs depending on the
model.
40. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Check Tile Mode status.
** It may not be supported depending on the model.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
Data2
Data3
00: Tile Mode Off
01: Tile Mode On
00 to 0F: Tile Row
00 to 0F: Tile Column
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[ ][Data5][x]
41. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
38. Reset (Command: f k)
To execute the Picture, Screen, Audio and Factory
reset function.
(Screen Reset can only be performed in RGB input
mode.)
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile
Row).
** It may not be supported depending on the model.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
*NG will be return if data is over (Tile Column) x (Tile
Row), except 0xFF.
00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
42. Tile H Position (Command: d e)
To adjust the Tile Horizontal position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
39. Tile Mode (Command: d d)
To set a Tile Mode and Tile Column/ Row values.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: 1st byte - Tile Row
2nd byte - Tile Column
*00, 01, 10, 11 means Tile Mode Off
** It may not be supported depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 32: -50 (Left) to 0 (Right)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
37. Fail Over Input Select (Command: m j)
To select the input source for auto switch.
* This command is only available when the fail over
(auto) mode is set to Custom.
87
88
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
43. Tile V Position (Command: d f)
To adjust the Tile Vertical position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 0 to 32: 0 (Bottom) to 50 (Top)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
44. Tile H Size (Command: d g)
To adjust the Tile Horizontal Size.
*Set Tile H Position to 0x32 before setting Tile H
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
46. Natural Mode (In Tile Mode) (Command : d j)
To display the image naturally, the part of the image
that would normally be displayed in the gap between
the monitors is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
47. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
* Data settings may vary depending on your model
as below.
Data 00: Off
01: 5 sec.
02: 10 sec.
03: 15 sec.
04: 1 min.
05: 3 min.
06: 5 min.
07: 10 min.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Tile V Size (Command: d h)
To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
48. FAN Control (Command : d o)
To set the Fan mode.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
03: Off
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
49. FAN Fault Check (Command: d w)
To check the fan errors.
Data FF: Read the status
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Fan fault
01: Fan OK
02: Model without a Fan
50. Temperature Value (Command: d n)
To check the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
52. Key (Command: m c)
To send a key code of the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For a key code, see the IR Code.
* Some key codes are not supported depending on
the model.
53. OSD Select (Command: k l)
To select OSD(On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed in hexadecimal.
51. Remote Controller Lock/ Key Lock
(Command: k m)
When the remote control and front keys are locked in
standby mode, the power cannot be turned on using
the remote control or front power button.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01: On (Lock On)
* Display will not be turned on by power on key of
remote controller and front panel control keys, if key
is locked on in standby mode.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
54. Elapsed time return (Command: d l)
To check the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
ENG
ENGLISH
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
89
90
CONTROLLING THE MULTIPLE PRODUCT
55. Serial No.Check (Command: f y)
To check the Serial Numbers.
ENGLISH
ENG
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check the product Serial Number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
58. White Balance Green Gain (Command: j n)
To set the White Balance Green Gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green Gain 0 to 254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
56. S/W Version (Command: f z)
To check the Software Version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check the Software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
57. White Balance Red Gain (Command: j m)
To set the White Balance Red Gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red Gain 0 to 254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
59. White Balance Blue Gain (Command: j o)
To set the White Balance Blue Gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue Gain 0 to 254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
60. Backlight (Command: m g)
To adjust the screen backlight.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
** It may not be supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
Data
00: Synchronized (When the monitor is off, the PC is
also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
02: Maintain the power-on state of the PC. (When
you turn on the monitor while the Media Player is
turned off, the Media Player is turned on.)
** It may not be supported depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
62. PC Power (Command: d s)
Control the PC power.
Transmission
[d][s][ ][Set ID][ ][Data][Cr]
Data 00: PC is turned off.
01: PC is turned on.
** It may not be supported depending on the model.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
64. Easy Brightness Control Schedule (Command: s
s)
Sets the Easy Brightness Control Schedule.
Transmission
[s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 - F6 (Data Reading Functions)
F1: Reads the data of the 1st Easy Brightness
Control
F2: Reads the data of the 2nd Easy Brightness
Control
F3: Reads the data of the 3rd Easy Brightness
Control
F4: Reads the data of the 4th Easy Brightness
Control
F5: Reads the data of the 5th Easy Brightness
Control
F6: Reads the data of the 6th Easy Brightness
Control
2. E1-E6 (Deletes One Index), E0 (Delete All
Indexes)
E0: Deletes all Easy Brightness Controls
E1: Deletes the 1st Easy Brightness Control
E2: Deletes the 2nd Easy Brightness Control
E3: Deletes the 3rd Easy Brightness Control
E4: Deletes the 4th Easy Brightness Control
E5: Deletes the 5th Easy Brightness Control
E6: Deletes the 6th Easy Brightness Control
3. 00-17: 00 - 23:00
Data2 00-3B: 00 - 59 minutes
Data3 00-64: backlight 0 - 100
* To read or delete the configured Easy Brightness
Control list, set [Data2][Data3] to FF.
(ex1: ss 01 f1 ff ff - Reads the 1st index data from the
Easy Brightness Control.
ex2: ss 01 e1 ff ff - Deletes the 1st index data from
the Easy Brightness Control.
ex3: ss 01 07 1E 46 - Adds a schedule to the
backlight 70 at 07:30.)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
** It may not be supported, depending on the model.
63. Easy Brightness Control Mode (Command: s m)
Selects ON/OFF of Easy Brightness Control Mode.
Transmission
[s][m][ ][Set ID][ ][Data][Cr]
Data 00: Easy Brightness Control OFF
01: Easy Brightness Control ON
* It does not work if the current time is not set up.
** It may not be supported, depending on the model.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
61. PC Power Control (Command: d t)
To control the PC power if the PC and the monitor
are synchronized.
91
92
CONTROLLING THE MULTIPLE PRODUCT
65. Status check (Command: s v)
Check various statuses.
ENGLISH
ENG
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data 05: Check the normal operation of No.1 and
No.2 luminance sensors.
06: luminance sensor being used:
07: Check the normal operation of top, bottom,
or main temperature sensors.
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
66. BLU Maintenance (Command: m t)
Select ON/OFF of BLU Maintenance.
Transmission
[m][t][ ][Set ID][ ][Data][Cr]
Data 00: BLU Maintenance OFF
01: BLU Maintenance ON
** It may not be supported, depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
When the Data is 05
Data100: All normal
01: BLU sensor 1 normal, BLU sensor 2 fail
02: BLU sensor 1 fail, BLU sensor 2 normal
03: All fail
When the Data is 06
Data100: No.1 luminance sensor is being used
01: No.2 luminance sensor is being used
When the Data is 07
Data100: All temperature sensors fail
01: Top normal, Bottom fail, Main fail
02: Top fail, Bottom normal, Main fail
03: Top normal, Bottom normal, Main fail
04: Top fail, Bottom fail, Main normal
05: Top normal, Bottom fail, Main fail
06: Top fail, Bottom normal, Main fail
07: All temperature sensors normal
When the Data is 08
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][Data3][x]
Data1: Temperature of the top sensor area when the
set is powered off.
Data2: Temperature of the bottom sensor area when
the set is powered off.
Data3: Temperature of the main sensor area when
the set is powered off.
When the Data is 09
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][x]
Data1 00-ff: Upper 2-byte of Fan Speed
Data2 00-ff: Lower 2-byte of Fan Speed
Fan Speed: Hex 0-20D0, Decimal 0-8400
** It may not be supported, depending on the model.
67. Screen mute (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Turns the screen on.
01: Turns the screen off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.
Temporary noise is normal when powering ON or
OFF this device.
Download PDF