LG | 55WL30MS-D | LG 42WL30MS-D Owner’s Manual

OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
42WL30MS
47WL30MS
55WL30MS
60WL30MS
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
4
LICENSES
23 ENTERTAINMENT
23
Using the Network
ASSEMBLING AND
PREPARING
23
- Connecting to a Wired Network
5
Accessories
6
Optional Accessories
7
Parts and Buttons
8
Connecting the Stand
8
Connecting the Speaker
9
Using the Mounting Cable Tie
10
Using the IR Receiver
10
Portrait Layout
11
Mounting on a Wall
5
13 REMOTE CONTROL
15 USING THE MONITOR
24
- Network Status
25
Using the My Media
25
- Connecting USB Storage Device and
27
- Browsing Files
29
- Viewing Movies
32
- Viewing Photos
35
- Listening to Music
38
- Viewing the Contents List
39
- DivX® VOD Guide
40
- Using PIP/PBP
Using Signage Device
41 CUSTOMIZING SETTINGS
41
Accessing Main Menus
42
- PICTURE Settings
45
- AUDIO Settings
46
- TIME Settings
47
- OPTION Settings
51
- Picture ID Settings
52
- NETWORK Settings
15
Connecting to a PC
15
- RGB Connection
16
- DVI Connection
16
- HDMI Connection
17
- Display Port Connection
17
- IR Receiver Connection
18
Adjusting the Screen
53 MAKING CONNECTIONS
18
- Selecting an Image Mode
18
- Customizing Image Options
54
External Device Connection
19
- Customizing PC Display Options
54
- AV(CVBS) Connection
19
Adjusting the Sound
54
- COMPONENT Connection
19
- Selecting an Sound Mode
55
- HDMI Connection
20
- Customizing Sound Options
55
- DVI Connection
20
Using Additional Options
56
USB Connection
20
- Using the Input List
56
LAN Connection
21
- Adjusting Aspect Ratio
57
Daisy Chain Connection
57
- DVI mode
58 TROUBLESHOOTING
TABLE OF CONTENTS
74 IR CODES
75 CONTROLLING THE MULTIPLE
PRODUCT
75
Connecting the Cable
75
RS-232C Configurations
75
Communication Parameter
76
Command Reference List
78
Transmission / Receiving Protocol
ENG
ENGLISH
61 SPECIFICATIONS
3
4
LICENSES
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Videoon-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
NOTE
The warranty will not cover any damages caused by using the product in an excessively dusty
yy
environment.
ASSEMBLING AND PREPARING
5
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
Power Cord
Remote Control and
Batteries
IR Receiver
CD (Owner's Manual,
SuperSign Program/ Manual)/
Cards
D-sub 15-pin Signal Cable
Magnetic sheet
Mounting Cable Tie
* Two cable ties are provided with
the 60WL30MS model.
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
ENG
ENGLISH
ASSEMBLING AND PREPARING
6
ASSEMBLING AND PREPARING
Optional Accessories
ENGLISH
ENG
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
Stand
ST-420T(42WL30MS)
ST-470T(47WL30MS)
ST-550T(55WL30MS)
ST-550T(60WL30MS)
Speaker
SP-2100
Screws
Screws
Diameter 4.0 mm x Pitch 0.7 mm x
Length 14 mm (Included Spring Washer)
Diameter 4.0 mm x
Pitch 0.7 mm x Length
8 mm (Included Spring
Washer)
Stand kit
Media Player
NC1000/NC1100
NA1000/NA1100
Cable holder/
Cable Tie
Screws
Diameter 4.0 mm x
Pitch 1.6 mm x Length
10 mm
Speaker kit
Screws
CD(Owner's Manual)/
Cards
Media Player kit
NOTE
Cable holder/cable tie may not be available in some areas or for some models.
yy
Optional accessories are not included for all models.
yy
ASSEMBLING AND PREPARING
7
Parts and Buttons
ENG
ENGLISH
1
2
3
4
5
6
Screen Buttons
No.
Connection Panel
Description
1
Moves the selection up and down.
2
Adjusts the volume level.
3
Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
4
Accesses the main menus, or saves your input and exits the menus.
5
Changes the input source.
6
Turns the power on or off.
8
ASSEMBLING AND PREPARING
ENGLISH
ENG
Connecting the Stand
Connecting the Speaker
- Only on some models.
- Only on some models.
1 Place a soft cloth on the table and put the
1 Connect the input signal cable to the monitor
product with the screen facing downward.
before installing the speakers. Use a cable tie
to organize the cables.
2 Mount the speaker by using a screw as shown
in the following. Make sure the power cable is
disconnected.
2 Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
3 Then connect the speaker cable. After installing
your speakers, use holders and cable ties to
organize the speaker cables.
ASSEMBLING AND PREPARING
55WL30MS
ENG
ENGLISH
Using the Mounting Cable
Tie
First, connect the input signal cable to be used.
Insert the cable tie into the bottom hole on the
back as shown in the figure to organize cables.
42WL30MS
60WL30MS
47WL30MS
9
10
ASSEMBLING AND PREPARING
Using the IR Receiver
ENGLISH
ENG
This allows a remote control sensor to be placed
in a custom location. The IR receiver is made
with a magnet. Attach the magnetic sheet to the
desired position on the product. It is recommended
to attach it to the location illustrated in the figure
below.
Using the Kensington security system
The Kensington security system connector is
located at the back of the monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the monitor set and a table.
NOTE
Portrait Layout
To install in portrait mode, rotate the set
counterclockwise 90 degrees when looking at from
the front.
The Kensington security system is optional.
yy
You can obtain additional accessories from
most electronics stores.
ASSEMBLING AND PREPARING
Mounting on a Wall
CAUTION
10 cm
10 cm
10 cm
10 cm
If you intend to mount the monitor to a wall, attach
a Wall mounting interface (optional parts) to the
back of the set.
When you install the monitor using a wall mounting
interface (optional parts), attach it carefully so it
will not fall.
1 Please, use a wall mount and screws in
accordance with VESA Standards.
2 If you use screws longer than standard, the
monitor might be damaged internally.
3 If you use improper screws, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for damage.
4 Please use VESA standard as below.
785mm (31 inch) or greater
yy
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 10 mm
Disconnect the power cord first, and then
yy
move or install the monitor set. Otherwise
electric shock may occur.
If you install the monitor set on a ceiling or
yy
slanted wall, it may fall and result in severe
injury.
Use an authorized LG wall mount and
yy
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the monitor set and void
your warranty.
Use the screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
To prevent injury, this apparatus must be
yy
securely attached to the wall in accordance
with the instrallation instructions. (This only
pertains to Australia.)
NOTE
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
yy
supplied with the wall mount.
ENG
ENGLISH
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
11
12
ASSEMBLING AND PREPARING
Securing the product to a wall (optional)
ENGLISH
ENG
(Depending on model)
1 Insert and tighten the eye-bolts, or product
brackets and bolts on the back of the product.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the product.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
yy
hang on the product.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the product securely.
Brackets, bolts and ropes are optional. You
yy
can obtain additional accessories from your
local dealer.
WARNING
If a product is not positioned in a sufficiently
yy
stable location, it can be potentially
hazardous due to falling. Many injuries,
particularly to children, can be avoided by
taking simple precautions such as:
»» Using cabinets or stands recommended
by the manufacturer of the product.
»» Only using furniture that can safely
support the product.
»» Ensuring the product is not overhanging
the edge of the supporting furniture.
»» Not placing the product on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the product to a suitable support.
»» Not standing the product on cloth or other
materials placed between the product
and supporting furniture.
»» Educating children about the dangers of
climbing on furniture to reach the product
or its controls.
REMOTE CONTROL
13
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control to the
yy
remote control sensor on the monitor set.
(POWER)
ENERGY SAVING( )
Adjusts the brightness of
the screen to reduce energy
consumption.
Turns the monitor set on or off.
MONITOR ON / OFF
Turns multiple monitors on or
off simultaneously.
INPUT
Selects the input mode.
3D
This button selection is not
applicable.
1/a/A Button
Toggles between numerical
and alphabetical.
Number and Alphabet buttons
Enters numerical or alphabetical
characters depending on the
setting.
ARC
Selects the Aspect Ratio
Mode.
Volume Up / Down
Adjusts the volume level.
CLEAR
Deletes the entered numerical
or alphabetical character.
PSM
Selects the Picture Status
Mode.
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.
MUTE
Mutes all sounds.
BACK
TILE
EXIT
ENG
ENGLISH
REMOTE CONTROL
14
REMOTE CONTROL
ENGLISH
ENG
INFO ⓘ
Views the information of the
currently program and the
screen.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
SETTINGS
Accesses the main menus
or saves your input and exit
menus.
W.BAL
Enters the White Balance
menu.
OK
Selects menus or options and
confirms your input.
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
Navigation buttons
Scrolls through menus or
options.
BACK
Allows the user to move back
one step in user interaction
function.
This button selection is not
applicable.
ID ON/OFF
When the number of Picture
ID is equal to Set ID you can
control the monitor which
you want in the multi display
condition.
EXIT
Clears all on-screen displays
and returns to monitor set
viewing from any menu.
TILE
Selects the TILE Mode.
USB Menu control buttons
Controls media playback.
USING THE MONITOR
15
Connecting to a PC
RGB Connection
Your monitor supports the Plug & Play* feature.
Transmits an analog video signal from your PC to
the monitor. Connect the PC and the monitor with
the 15-pin signal cable as shown an following
illustration. Select RGB input. To transmit an audio
signal, connect an optional audio cable.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
Back of the product.
Macintosh Adapter
(not included)
NOTE
It is recommended you use an HDMI
yy
connection for the best image quality.
Use a shielded signal interface cable, such
yy
as D-sub 15-pin signal cable and DVI/HDMI
cable, with a ferrite core to maintain standard compliance for the product.
If you turn the monitor set on when the set is
yy
cold, the screen may flicker. This is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
If you use a cable longer than the D-sub 15yy
pin signal cable provided, certain images
may appear blurry.
PC/MAC
(not included)
CAUTION
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the screen
yy
for a long period of time to prevent image
burn. Use a screensaver if possible.
NOTE
Use the standard
yy
Macintosh adapter since
an incompatible adapter
is available in the market.
(Different signaling system)
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
ENG
ENGLISH
USING THE MONITOR
16
USING THE MONITOR
ENGLISH
ENG
DVI Connection
HDMI Connection
Transmits an digital video signal from your PC to
the monitor. Connect the PC and the monitor with
a DVI cable as shown the following illustration.
Select DVI input. To transmit an audio signal,
connect an optional audio cable.
Transmits the digital video and audio signals
from your PC to the monitor. Connect the PC and
the monitor with an HDMI cable as shown in the
following illustration. Select HDMI input.
Back of the product.
Back of the product.
PC
PC
(not included)
(not included)
(not included)
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear audio in HDMI mode. Some PCs
require you to manually change the default
audio output to HDMI.
If you want to use HDMI-PC mode, you must
yy
set the input label to PC mode.
When HDMI PC is used, a compatiblity
yy
problem might occur.
USING THE MONITOR
IR Receiver Connection
Transmits the digital video and audio signals from
your PC to the monitor. Connect the PC and the
monitor with a Display Port cable as shown in the
following illustrations. Select Display Port input
source.
Allows the use of a wired remote or IR receiver
extension.
Back of the product.
Back of the product.
PC
(not included)
NOTE
Make sure the power cable is disconnected.
yy
ENG
ENGLISH
Display Port Connection
17
18
USING THE MONITOR
ENGLISH
ENG
Adjusting the Screen
Customizing Image Options
Selecting an Image Mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images in its optimized settings by
selecting one of the preset image modes.
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to
PICTURE and press OK.
3 Press the navigation buttons to scroll to
Picture Mode and press OK.
4 Press the navigation buttons to scroll to an
image mode you want and press OK.
Mode
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to
PICTURE and press OK.
3 Press the navigation buttons to scroll to
Picture Mode and press OK.
4 Press the navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Description
Vivid
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for the normal
environment.
Cinema
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and
dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast
gaming screen such as PCs or games.
5 When you are finished, press EXIT.
Option
Description
Backlight
djusts the brightness of the screen
A
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient
of the video signal. You may use
contrast when the bright part of the
picture is saturated.
Brightness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark part of the picture is
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter colors
such as red, or set to cool to make
picture bluish.
Advanced
Control
Customizes the advanced options.
Refer to the advanced image options.
Picture Reset
Restores the options to the default
setting.
When you return to the previous menu, press
BACK.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
USING THE MONITOR
19
Adjusting the Sound
Customize options of each image mode for the
best image quality.
This function works in the following mode: yy
RGB[PC] mode.
Selecting an Sound Mode
1 Press SETTINGS to access the main menus.
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to
2 Press the navigation buttons to scroll to AUDIO
3 Press the navigation buttons to scroll to Screen
3 Press the navigation buttons to scroll to Sound
4 Select and adjust following options, and then
4 Press the navigation buttons to scroll to a
PICTURE and press OK.
and press OK.
press OK.
Option
Play the sound in its optimized settings by
selecting one of the preset sound modes.
and press OK.
Mode and press OK.
sound mode you want and press OK.
Description
Mode
Resolution
Selects a proper resolution.
Standard
Auto
Config.
Sets to adjust the screen position, clock,
and phase automatically. The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Select when you want standard-quality
sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sports
Select when you watch sports events.
Game
Select when you watch sports events.
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Description
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
Customizing PC Display Options
20
USING THE MONITOR
ENGLISH
ENG
Customizing Sound Options
Using Additional Options
Customize options of each sound mode for the
best sound quality.
Using the Input List
1 Press SETTINGS to access the main menus.
1 Press INPUT to access the Input List.
2 Press the navigation buttons to scroll to AUDIO
2 Press the navigation buttons to scroll to one of
and press OK.
the input mode and press OK.
3 Press the navigation buttons to scroll to Sound
Mode and press OK.
Input mode
Description
4 Press the navigation buttons to scroll to a
AV
Watch video from a VCR or other
external devices.
5 Select and adjust following options, and then
Component
Watch the contents in a DVD or
other extemal devices, or through a
digital set-top box
RGB
View a PC display on the screen
HDMI
Watch contents in a PC, DVD
of digital set-top box other high
definition devices
DVI-D
Watch contents in a PC, DVD
of digital set-top box other high
definition devices
sound mode you want and press OK.
press OK.
Option
Description
Infinite
Sound
LG's Infinity Sound option provides
5.1 channel stereo sound from two
speakers.
Treble
Controls the dominant sounds in the
output. When you turn up the treble,
it will increase the output to the lower
frequency range.
Display Port
Bass
Makes the output sound softer. If the
bass is increased, the frequency of the
output also increases.
Watch contents in a PC, DVD
of digital set-top box other high
definition devices
USB
Plays the multimedia file saved in
the USB.
Reset
Resets the sound mode to the default
setting.
Signage
Plays multimedia files saved in
internal memory.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
21
USING THE MONITOR
Adjusting Aspect Ratio
CAUTION
If a fixed image displays on the screen for a long period of time, it will be imprinted and become
yy
a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the
warranty.
To prevent image sticking, do not play a still image for more than two hours.
yy
If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area
yy
of the screen.
Recommended operation time for optimum performance and reliability is 12 hours or less per day.
yy
NOTE
You can also change the image size by accessing the main menus.
yy
The Just Scan mode operates when a video signal has resolution of 720p or higher.
yy
MODE
AV
Component
o
Just Scan
x
DVI
HDMI
Display Port
PC
DTV
PC
DTV
PC
DTV
PC
o
o
o
o
o
o
o
o
o
x
o
x
o
x
o
x
Aspect Ratio
16:9
RGB
1:1
x
x
o
x
o
x
o
x
o
4:3
o
o
o
o
o
o
o
o
o
Zoom
o
o
x
o
x
o
x
o
x
Cinema Zoom 1
o
o
x
o
x
o
x
o
x
ENG
ENGLISH
Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set.
22
USING THE MONITOR
ENGLISH
ENG
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC, DVI
PC, RGB PC)
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
ENTERTAINMENT
23
Using the Network
Connecting to a Wired Network
Connect the display to a local area network (LAN)
via the LAN port as shown in the following illustration and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet provider or router manual.
LAN
Router
@
Internet
Internet
LAN
WAN
To set up the network settings: (Even if your display has already connected automatically, running
setup again will not harm anything),
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NETWORK and press OK.
3 Press the navigation buttons to select Network
Setting and press OK.
4 If you already set network setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
-If selecting IP Manual Setting, press the
navigation and Number buttons. IP addresses
will need to be input manually.
-IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
ETHERNET
Cable modem
CAUTION
yy
Do not connect a modular phone cable to the
LAN port.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
yy
Network setting menu will not be available until the display connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENG
ENGLISH
ENTERTAINMENT
24
ENTERTAINMENT
NOTE
ENGLISH
ENG
yy
If you want to access the Internet directly on
your display, the Internet connection should
always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yy
If you do not complete the network settings,
the network may not work properly.
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits sub scription to one device, this display
may not be allowed to connect when a PC is
already connected.)
yy
The use of a router may not be allowed or its
usage may be limited depending on the policies and restrictions of your ISP. For details,
contact your ISP directly. Tips for Network setting
yy
Use a standard LAN cable with this display.
Cat5 or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or disconnect the power cable of the home network
router or cable modem. Then power on and/or
connect the power cable again.
yy
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable terms of service. For details, contact your
ISP.
yy
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your respon
sibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow
for such a connection, you will not be able to
connect the display.
Network Status
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NETWORK and press OK.
3 Press the navigation buttons to select Network
Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after setting the network.
Return to the previous menu.
ENTERTAINMENT
Using the My Media
Connect USB storage devices, such as a USB
flash memory, or an external hard drive, to the
monitor set, or use Signage (Internal storage device) to use multimedia features.
Connect a USB flash memory, or USB memory
card reader, to the monitor set as shown in the
figure below to display the MY MEDIA screen.
or
CAUTION
yy
Do not turn the display off or remove a USB
storage device while MY MEDIA menu is
activated, as this could result in loss of files
or damage to the USB storage device.
yy
Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
yy
If an internal storage device is connected to
the monitor, it is recommended to use USB
storage devices only for copying files.
yy
Copying a file from USB storage devices to
Signage (Internal storage device) may take
some time depending on the size of the file.
Tips for using USB storage devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition program may not be recognized.
yy
A USB storage device which uses its own
driver will not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such a
device is suddenly separated or unplugged,
the stored files or the USB storage device
may be damaged.
yy
Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction. Only use a USB storage device
which has normal music files, image files or movie files.
yy
Please use only a USB storage device which
was formatted as a FAT32 file system, NTFS
file system by with the Windows operating
system. In case of a storage device formatted with a different utility programme which
is not supported by Windows, it may not be
recognized.
yy
Please connect power to a USB storage device (over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable included by the device maker.
yy
Some USB storage devices may not be supported or operate smoothly.
yy
File alignment method of USB storage devices is similar to Window XP and the monitor
can recognize up to 100 English characters.
yy
Be sure to back up important files since data
stored on a USB memory device may be
damaged. We will not be responsible for any
data loss.
ENG
ENGLISH
Connecting USB Storage Device
and Using Signage Device
25
26
ENTERTAINMENT
ENGLISH
ENG
yy
If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source.
yy
If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
yy
If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yy
If the USB memory device does not work
properly, disconnect and reconnect it.
yy
How fast a USB memory device is detected
differs from device to device.
yy
If the USB is connected in Standby Mode,
that drive will automatically be loaded when
the display is turned on.
yy
The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
yy
Any device with more than the recommended capacity may not work properly.
yy
If a USB external hard disk with a Energy
Saving function does not work, turn the
hard disk off and on again to make it work
properly.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly with videos.
yy
A maximum of 999 folders or files can be
recognized under one folder.
yy
It is recommended you use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
yy
Only a USB memory device can be used
to play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
yy
Only an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
yy
A USB 3.0 storage device may not work.
yy
Do not remove the Signage device (internal
storage device) or turn off the display
while copying a file from the USB device
to the Signage device or deleting a file in
the Signage device. The device may be
damaged or the system may be affected.
yy
The Copy and Delete functions may not be
available if you use a USB device formatted
by the NTFS file system, which is provided
by the Windows operating system, or a readonly storage device.
yy
If the files of the contents list are in the
storage device connected to the monitor set,
the content is played when the monitor is
powered on. When both USB storage device
and internal storage device are connected to
the monitor, the monitor plays the content of
the most recently recognized storage device.
27
ENTERTAINMENT
Browsing Files
2
1
1 Press SETTINGS to access the main menu.
4
Page 1/1
Photo List
USB
Drive1
Page 1/1
001
002
003
004
005
009
010
011
012
013
006
007
008
2 Press the search button to scroll to MY MEDIA
and press OK.
3 Press the Search button to go to the Movie
List, Photo List, Music List, or Content List
that you want, and press OK.
Change device
To Photo List
Change Numbers
Photo List
Music List
Contents List
4 If a USB storage device is connected, the
screen appears as shown below. Press the
Navigation button to go to USB or Signage
and press OK.
Please select the device.
USB
Signage
Previous
015
View
Mark Mode
016
PAGE
Page Change
Exit
5
No.
Movie List
014
Move
Description
1
Upper level folder
2
Current page/Total pages
3
Contents under the folder focused on 1
4
Current page/ Total pages of contents
under the folder focused on 1
5
Remote button
Remote
button
Description
Red
button
Select USB or Signage device.
Green
button
Press the green button to toggle between
Photo List -> Music List, Music List ->
Contents List, Contents List -> Movie
List or Movie List -> Photo List.
Yellow
button
A method to view in 5 large thumbnail or
simple list.
Blue
button
Convert to Mark Mode.
ENG
ENGLISH
Browse for a file saved on a USB storage or
Signage device (internal storage device).
3
28
ENTERTAINMENT
Supported file format
ENGLISH
ENG
Type
Movie
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Video format : DivX3.11, DivX4, DivX5.x, DivX6,
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Movie
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6,
Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
Audio format: MP2,MP3,Dolby Digital, LPCM,
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
File
Item
Profile
Extensions
Photo JPEG
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
BMP
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files)
JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
yy You can play JPEG files only.
yy Non-supported files are displayed in the form
of predefined icon.
File
Item
Profile
Extensions
jpeg
jpg
jpe
Music
File Extensions : *.cts/ *.cse
JPG
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Photo
Content
(when
using
SuperSign
Manager)
supported
file format
yy SOF0:
baseline
yy SOF1:
Extend
Sequential
yy SOF2:
Progressive
photo size
yy Min: 64 x 64
yy Max-Normal
Type:
yy 15360 (W) x
8640 (H)
yy Progressive
Type:
yy 1920 (W) x
1440 (H)
MP3
Bit rate 32 to 320
yy Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
yy Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
yy Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
supported
file format
yy SOF0:
baseline
yy SOF1:
Extend
Sequential
yy SOF2:
Progressive
Photo size
yy Min: 64 x 64
yy Max Type:
1366 x 768
Bit rate
32 kbps to 320
kbps
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
PNG
Music MP3
Sampling
rate
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
29
ENTERTAINMENT
Mark Mode - USB device
Viewing Movies
Movie List
USB
1 Press SETTINGS to access the main menu.
2 Press the navigation button to scroll to MY
Mark Mode
003
001. - B01.mp4
01:00
004
005
002. - B02.mp4
02:00
006
007
Page 1/1
003. - B03.mp4
03:00
004. - B04.mp4
04:00
005. - B05.mp4
05:00
MEDIA and press OK.
3 Press the navigation button to scroll to Movie
List and press OK.
Move
Play Marked
Copy to Signage
Mark
Mark All
Delete
PAGE
Page Change
Exit Mark Mode
4 Press the navigation button to go to USB or
Signage and press OK.
Mark Mode - Signage device
Page 1/2
Movie List
Please select the device.
Mark Mode
003
Signage
USB
001. - B01.mp4
01:00
Signage
004
002. - B02.mp4
02:00
005
006
007
Page 1/1
003. - B03.mp4
03:00
004. - B04.mp4
04:00
005. - B05.mp4
05:00
Move
Previous
Play Marked
5 Press the navigation buttons to scroll to a folder
you want and press OK.
Delete
Menu
003
004
005
006
002. - B02.mp4
02:00
007
Page 1/1
003. - B03.mp4
03:00
004. - B04.mp4
04:00
005. - B05.mp4
05:00
Move
Change device
To Photo List
Change Numbers
Play
Mark Mode
PAGE
Page Change
Exit
Description
Copy to
Signage
Copy a video file and move it to
Signage. (This function is only
available with USB storage devices.)
Movie List
001. - B01.mp4
01:00
Page Change
Exit Mark Mode
Play the selected video files.
Once a video file finishes playing,
the next selected one will be played
automatically.
you want and press OK.
USB
PAGE
Play Marked
6 Press the navigation buttons to scroll to a file
Page 1/2
Mark
Mark All
Delete
Delete a video file.
Mark All
Mark all video files on the screen.
Exit Mark
Mode
Press the EXIT key to exit the Mark
Mode.
NOTE
yy
You can only copy files from a USB device to
the Signage device (internal storage device).
ENG
ENGLISH
Page 1/2
Play video files saved on a USB storage or
Signage device (internal storage device).
30
ENTERTAINMENT
7 When plays a video, you can set the following:
ENGLISH
ENG
01:02:30 / 02:30:25
ꕗ
ꕖ
ꕘ
ꕚ
Remote
button
ꕙ
MENU
Option
Hide
Exit
Description
Stops the playback
Plays a video
Pauses or resumes the playback
Scans backward in a file
Scans forward in a file
ENERGY
SAVING
SETTINGS
BACK
EXIT
or
Adjusts the screen brightness to save
energy.
Show the Option menu.
Hide the menu on the full-sized screen.
Return to Movie List.
Skips to specific points in a file during playback. The time of a specific
point will appear on the status bar. In
some files, this function may not work
properly.
NOTE
yy
Non-supported files are displayed the
preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
Tips for using playing video files
yy
Some user-created subtitles may not work
properly.
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
Movie files produced with some encoders
may not be played correctly.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
HD videos with a maximum of
1920x1080@25/30P or 1280x720@50/60P
are supported, depending on the frame.
yy
Videos with resolutions higher than
1920X1080@25/30P or 1280x720@50/60P
may not work properly depending on the
frame.
yy
Movie files other than the specified types and
formats may not work properly.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yy
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
not supported for playback.
yy
A DivX movie file and its subtitle file must be
located in the same folder.
yy
A video file name and its subtitle file name
must be identical for it to be displayed.
yy
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
yy
Files encoded with GMC(Global Motion
Compensation) may not be played.
ENTERTAINMENT
Video options
Size
menus.
Repeat
2 Press the navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
Selects your desired Subtitle size
during movie play.
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback is turned off, it can
run the playback if the file name is
similar to the previous file.
NOTE
yy
The option values changed in Movie List
do not affect Photo List or Music List.
Therefore, they are not affected by option
values changed in Photo List or Music List.
yy
The option values changed in Photo List
and Music List do affect each other.
yy
When replaying the video file after stopping,
you can play from where it stopped previously.
NOTE
yy
Only 10,000 of sync blocks can be supported
within the subtitle file.
yy
When playing a video, you can adjust the
picture size by pressing the ARC button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
Select Set Video Play. to access the following
menus:
Menu
Picture Size
Audio
Language
Subtitle
Language
Language
Code Page
Sync
Position
Description
Selects your desired picture
format during movie play.
Changes the Language Group of the
audio during movie play. Files
with a single audio track cannot be
selected.
Turn on/off the subtitle.
Activated for SMI subtitle and
can select the language within the
subtitle.
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
Changes the position of the
subtitle either up or down during
movie play.
For more details about the Set Video. menu, see
the CUSTOMIZE SETTINGS section. See page 42.
For more details about the Set Audio. menu, see
the CUSTOMIZE SETTINGS section. See page 45.
ENG
ENGLISH
1 Press SETTINGS to access the Pop-Up
31
32
ENTERTAINMENT
Mark Mode - USB device
Viewing Photos
ENGLISH
ENG
Page 1/2
View photo files saved on a USB storage or
Signage device (internal storage device).
Photo List
USB
Mark Mode
003
004
005
006
007
Page 1/1
1 Press SETTINGS to access the main menu.
2 Press the navigation button to scroll to MY
MEDIA and press OK.
001
002
003
004
005
006
007
010
011
012
013
014
015
016
3 Press the navigation button to scroll to Photo
List and press OK.
Move
View Marked
Copy to Signage
Mark
008
017
018
PAGE
Mark All
Delete
009
Page Change
Exit Mark Mode
4 Press the navigation button to go to USB or
Signage and press OK.
Mark Mode - Signage device
Please select the device.
Page 1/2
Photo List
USB
USB
Signage
Mark Mode
003
004
005
006
007
001
002
003
004
005
006
007
010
011
012
013
014
015
016
Previous
Move
View Marked
5 Press the navigation buttons to scroll to a
folder you want and press OK.
Delete
Menu
6 Press the navigation buttons to scroll to a file
you want and press OK.
View Marked
Copy to
Signage
Delete
Page 1/2
Photo List
003
USB
004
005
006
007
Page 1/1
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
Move
Change device
To Music List
Change Numbers
View
Mark Mode
PAGE
Page 1/1
Mark
Mark All
008
009
017
PAGE
018
Page Change
Exit Mark Mode
Description
Displays the selected photo file.
Copy a photo file and move it to
Signage. (This function is only
available with USB storage devices.)
Delete a photo file.
Mark All
Mark all photo files on the screen.
Exit Mark
Mode
Exit the Mark Mode.
Page Change
Exit
NOTE
yy
Non-supported files are displayed the
preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
yy
You can only copy files from a USB device to
the Signage device (internal storage device).
ENTERTAINMENT
7 When plays a video, you can set the following:
Option
33
NOTE
yyYou cannot change the music
folder while the background
music is playing.
yyYou can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Slideshow
ꕖ
Options
Menu
Slideshow
BGM
BGM
ꕗ
ꔦ
MENU
Option
Hide
Exit
Number of selected photos
Description
Starts or stops a slideshow with selected photos. If there are no selected
photos, all photos saved in the current
folder display during a slideshow. To set
a slideshow speed, select Option.
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust option by SETTINGS
button on the remote control.
Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
yyThe supported photo size is
limited. You cannot rotate a photo
if the resolution of the rotated
width is larger than the supported
resolution size.
Hide
Exit
Hides the option window.
To display the options, press OK.
Return to Photo List.
Photo options
1 Press SETTINGS to show the Option menus.
2 Press the navigation buttons to scroll to Set
Photo View., Set Video. or Set Audio. and
press OK.
View the photo by zoom in 2, 4 times.
NOTE
yyPhotos with a resolution of
960x540 or less cannot be
enlarged.
Adjusts the screen brightness to save
energy.
NOTE
yy
The option values changed in Movie List
do not affect Photo List or Music List.
Therefore, they are not affected by option
values changed in Photo List or Music List.
yy
The option values changed in Photo List
and Music List do affect each other.
ENG
ENGLISH
yy Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
yy TransitionEffect: Set the view mode
of the slideshow.
yy BGM: Selects a music folder for the
background music.
34
ENTERTAINMENT
If you select Set Photo View., you can make adjustments as shown below:
ENGLISH
ENG
1 Press the navigation buttons to scroll to select Slide Speed, Transition Effect, or BGM.
2 Press the navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide
Fade In
Fades the slide out slowly before playing to the next slide.
For more details about the Set Video. menu, see the CUSTOMIZE SETTINGS section. See page 42.
For more details about the Set Audio. menu, see the CUSTOMIZE SETTINGS section. See page 45.
35
ENTERTAINMENT
Mark Mode - USB device
Listening to Music
Music List
USB
1 Press SETTINGS to access the main menu.
2 Press the navigation button to scroll to MY
Mark Mode
003
001. - B01.mp3
01:00
004
005
002. - B02.mp3
02:00
006
007
Page 1/1
003. - B03.mp3
03:00
004. - B04.mp3
04:00
005. - B05.mp3
05:00
MEDIA and press OK.
3 Press the navigation button to scroll to Music
List and press OK.
Move
Play Marked
Copy to Signage
Delete
Mark
Mark All
PAGE
Page Change
Exit Mark Mode
4 Press the navigation button to go to USB or
Signage and press OK.
Mark Mode - Signage device
Please select the device.
Page 1/2
Music List
USB
Mark Mode
003
Signage
Signage
001. - B01.mp3
01:00
004
002. - B02.mp3
02:00
005
006
007
Page 1/1
003. - B03.mp3
03:00
004. - B04.mp3
04:00
005. - B05.mp3
05:00
Previous
Move
Play Marked
Delete
Mark
Mark All
PAGE
Page Change
Exit Mark Mode
5 Press the navigation buttons to scroll to a folder
you want and press OK.
6 Press the navigation buttons to scroll to a file
you want and press OK.
Page 1/2
003
001. - B01.mp3
01:00
004
005
006
Delete
002. - B02.mp3
02:00
007
Page 1/1
003. - B03.mp3
03:00
004. - B04.mp3
04:00
005. - B05.mp3
05:00
Move
Change device
To Contents List
Play Marked
Copy to
Signage
Music List
USB
Menu
Change Numbers
Play
Mark Mode
PAGE
Description
Display the selected music file.
Copy a music file and move it to
Signage. (This function is only
available with USB storage devices.)
Delete a music file.
Mark All
Mark all music files on the screen.
Exit Mark
Mode
Exit the Mark Mode.
Page Change
Exit
NOTE
yy
You can only copy files from a USB device to
the Signage device (internal storage device).
ENG
ENGLISH
Page 1/2
View photo files saved on a USB storage or
Signage device (internal storage device).
36
ENTERTAINMENT
7 When listening to music, you can set the
Tips for playing music files
ENGLISH
ENG
following:
This unit cannot support the ID3 Tag
yy
embedded MP3 files.
Page 1/2
Music List
USB
003
001. - B01.mp3
01:00
002. - B02.mp3
02:00
004
005
006
003. - B03.mp3
03:00
007
004. - B04.mp3
04:00
002. - B02.mp3
ꕗ
ꕖ
ꕘ
Page 1/2
005. - B05.mp3
05:00
00:40 / 02:00
ꕚ
Remote
button
ꕙ
Play with Photo
MENU
Option
Hide
Exit
Description
Stops playing back the file and moves
back to the Music List.
Plays a music file.
Pauses or resumes playback
Skips to the next file
Skips to the previous file
Green button Start playing the selected music files
and then move to the Photo List.
ENERGY
Adjusts the screen brightness to save
energy.
SAVING
SETTINGS Show the Option menu.
Hides the option window.
BACK
To display the options, press OK.
EXIT
Return to Music List.
Skips to specific points in a file duror
ing playback. The time of a specific
point will appear on the status bar. In
some files, this function may not work
properly.
NOTE
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
yy
A damaged or corrupted music does not play
but displays 00:00 in playtime.
yy
A music downloaded from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
yy
If you press OK,
buttons, screen saver is
stopped.
yy
The PLAY( ), Pause( ),
,
,
buttons on the remote control are also available in this mode.
yy
You can use the
button to select the next
music and the
button to select the previous music.
file name
002. B02.mp3
00:31 / 04:04
Time elapsed/ Duration
ENTERTAINMENT
37
Music options
2 Press the navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK.
NOTE
yy
The option values changed in Movie List
do not affect Photo List or Music List.
Therefore, they are not affected by option
values changed in Photo List or Music List.
yy
The option values changed in Photo List
and Music List do affect each other.
When you select the Set Audio Play,
1 Press the navigation buttons to scroll to select
the Repeat or Random.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
For more details about the Set Audio. menu, see
the CUSTOMIZE SETTINGS section. See page 45.
ENG
ENGLISH
1 Press SETTINGS to access the pop-up menus.
38
ENTERTAINMENT
Mark Mode - USB device
Viewing the Contents List
ENGLISH
ENG
Page 1/2
Plays back the stored files using the Export option
in SuperSign Manager.
Contents List
USB
Mark Mode
test1.cts
07/01/2011
1 Press SETTINGS to access the main menu.
003
004
005
006
test2.cts
07/01/2011
007
Page 1/1
test3.cts
07/01/2011
test4.cts
07/01/2011
test5.cts
07/01/2011
2 Press the navigation button to scroll to MY
MEDIA and press OK.
Move
3 Press the navigation button to scroll to
Copy to Signage
Contents List and press OK.
4 Press the navigation button to go to USB or
Mark
Exit Mark Mode
Delete
PAGE
Page Change
Exit
Mark Mode - Signage device
Signage and press OK.
Page 1/2
Contents List
Please select the device.
Mark Mode
Signage
USB
test1.cts
07/01/2011
Signage
003
004
005
006
test2.cts
07/01/2011
007
Page 1/1
test3.cts
07/01/2011
test4.cts
07/01/2011
test5.cts
07/01/2011
Move
Previous
5 Press the navigation buttons to scroll to a folder
you want and press OK.
6 Press the navigation buttons to scroll to a file
you want and press OK.
Menu
Copy to
Signage
Delete
Exit Mark
Mode
Page 1/2
Contents List
003
USB
test1.cts
07/01/2011
004
005
006
test2.cts
07/01/2011
007
Page 1/1
test3.cts
07/01/2011
Mark
Exit Mark Mode
Delete
Exit
PAGE
Page Change
Exit
Description
Copy a contents files and move it
to Signage. (This function is only
available with USB storage devices.)
Delete a contents files.
Exit the Mark Mode.
Exit the OSD.
test4.cts
07/01/2011
test5.cts
07/01/2011
NOTE
Move
Change device
To Movie List
Change Numbers
Play
Mark Mode
PAGE
Page Change
Exit
yy
While playing media files from Contents
List, only the BACK, EXIT, or volume button
are available. Selecting the BACK or EXIT
button stops playing media files and returns
to the Contents List.
yy
If there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
yy
You can only copy files from a USB device to
the Signage device (internal storage device).
ENTERTAINMENT
DivX® VOD Guide
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
1 Press SETTINGS to access the main menus.
DivX® VOD Deregistration
You should deregister your device with 8 digit DivX
deregistration code from your device at www.divx.
com/vod.
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to MY
MEDIA and press OK.
3 Press the Blue button.
2 Press the navigation buttons to scroll to MY
4 Press the navigation buttons to scroll to Deac-
3 Press the Blue button.
5 Press the navigation buttons to select Yes to
MEDIA and press OK.
4 Press the navigation buttons to scroll to DivX
tivation and press OK.
confirm.
Reg. Code and press OK.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
5 View the registration code of your display.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Yes
No
6 When you are finished, press EXIT.
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
NOTE
yy
While you are checking the registration code,
some buttons may not work.
yy
If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
product.
yy
The video or audio files that are not converted by the standard DivX codec may be
corrupted or not be played.
yy
The DivX VOD code allows you to activate
up to 6 devices under one account.
When you return to the previous menu, press
BACK.
NOTE
Once the deregistration is executed, you
yy
must register your device again to see DivX®
VOD contents.
ENG
ENGLISH
DivX® VOD Registration
39
40
ENTERTAINMENT
Using PIP/PBP
6 Select the PIP or PBP icon from the play list.
ENGLISH
ENG
Displays videos and photos stored on the USB
or Signage device (internal storage device) on
a single monitor with the main and sub screens
divided. (See page 50.)
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to OPTION and press OK.
01:02:30 / 02:30:25
ꕗ
3 Press PIP/PBP to select PIP or PBP and then
press OK.
PIP/PBP
ꕘ
ꕚ
ꕙ
MENU
Option
Hide
Exit
Movie List
Prev.
Move
Mode
ꕖ
Off
Position
PIP
Size
PBP
2/13
4 Select Movie List or Photo List from My
Slideshow
Media. (With PIP/PBP selected, the Music
List and Contents List are deactivated.)
ꕖ
BGM
ꔦ
ꕗ
MENU
Option
Hide
Exit
Photo List
7 Select either Main or Sub for sound. You must
Movie List
Photo List
Music List
Contents List
to select the output sound before running the
PIP or PBP function.
Select the sound path.
5 Select a file you want and then press OK.
Main
8 The sub screen is displayed on the main
Page 1/2
Photo List
003
Signage
004
005
006
007
Page 1/1
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
Move
Change device
To Music List
Change Numbers
Sub
View
Mark Mode
PAGE
Page Change
Exit
screen.
CUSTOMIZING SETTINGS
ENG
ENGLISH
CUSTOMIZING SETTINGS
Accessing Main Menus
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to one of the following menus and
press OK.
3 Press the navigation buttons to scroll to the setting or option you want
and press OK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See page 42.)
Adjusts the image size,
quality, or effect.
PICTURE
OPTION (See page 47.)
Customizes the general
settings.
OPTION
AUDIO (See page 45.)
Adjusts the sound quality,
effect, or volume level.
AUDIO
NETWORK
41
TIME
MY MEDIA
NETWORK (See page 52.)
Sets up the network
setting.
TIME (See page 46.)
Sets the time, date, or
Timer feature.
MY MIDIA (See page 25.)
Display and play movie,
photo and music contents
stored on your USB or
Signage device (Internal
storage device).
42
CUSTOMIZING SETTINGS
PICTURE Settings
PICTURE
ENGLISH
ENG
• Aspect Ratio 1 Press SETTINGS to access the main menus.
•
2 Press the navigation buttons to scroll to PICTURE and
press OK.
3 Press the navigation buttons to scroll to the setting or
option you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Move
Energy Saving : 16:9
OK
ꔋ
: Off
• Smart Energy Saving : Off
• Picture Mode • Backlight : Standard
• Contrast • Brightness 50
• Sharpness 50
• Color 60
• Tint 0
R
G
• Color Temp. 0
W
C
• Advanced Control
• Picture Reset
70
100
• Screen
The available picture settings are described in the following:
Setting
Description
Aspect Ratio
Changes the image size to view images at its optimal size (See page 21.).
Energy
Saving
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Smart Energy
Saving
Picture Mode
Level
Off
Disables Energy Saving function.
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen Off
The screen turns off in 3 seconds.
Adjusts the backlight and contrast depending on the screen brightness.
Level
Off
Disables the Smart Energy Saving function.
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Selects one of the preset image or customizes options in each mode for the best monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the monitor set .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
CUSTOMIZING SETTINGS
Setting
Description
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution.
Auto Configure
Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Picture Mode options
Setting
Description
Backlight
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use contrast when the bright
part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use brightness when the dark part
of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp .
Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options. Refer to the advanced image options. (See page 44.).
Picture Reset
Restores the options to the default setting.
NOTE
If the Picture Mode setting in the Picture menu is set to Vivid, Standard, Cinema, Sport, or Game,
yy
the subsequent menus will be automatically set.
You cannot adjust Sharpness, Color and Tint in the RGB/ HDMI-PC/ DVI-PC mode.
yy
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
ENG
ENGLISH
SCREEN
(In RGB
Mode Only)
43
44
CUSTOMIZING SETTINGS
Advanced Control
ENGLISH
ENG
Setting
Dynamic
Contrast
(Off/High/
Medium/Low)
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (Function works in the
following mode - Component, HDMI-DTV, DVI-DTV)
Dynamic Color Adjusts screen Colors so that they look livelier, richer, and clearer. This feature enhances
(Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (Function works in
the following mode - Component, HDMI-DTV, DVI-DTV)
Clear White
(Off/High/Low)
Make the white area of screen brighter and more white.
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise
Reduction
(Off/High/
Medium/Low)
educes screen noise without compromising video quality. (Function works in the following mode R
Component, HDMI-DTV, DVI-DTV)
Digital Noise
Reduction
(Off/High/
Medium/Low)
This option reduces the noise produced while creating digital video signals.
Gamma
(High/Medium/
Low)
Set your own gamma value. On the monitor, high gamma values display whitish images and low
gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - Component, HDMI-DTV, DVI-DTV)
CUSTOMIZING SETTINGS
AUDIO Settings
AUDIO
1 Press SETTINGS to access the main menus.
Move
• Balance 2 Press the navigation buttons to scroll to AUDIO and press
OK.
3 Press the navigation buttons to scroll to the setting or
OK
: Off
ꔋ
0
L
• Sound Mode : Standard
• Infinite Sound: Off
• Treble 50
• Bass 50
R
• Reset
option you want and press OK.
-To return to the previous level, press BACK.
• Digital Audio Input
• Speaker : On
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others, it helps users listen to human voices better.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
The most commanding and natural audio.
Music
Select this option to enjoy the original sound when listening to
the music.
Cinema
Select this option to enjoy sublime sound.
Sport
Select this option to watch sports broadcasting.
Game
To enjoy dynamic sound when playing a game.
NOTE
yyIf sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
Option
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound
from two speakers.
Treble
Controls the dominant sounds in the output. When you turn up
the treble, it will increase the output to the higher frequency
range.
Bass
Makes the output sound softer. When you turn up the bass, it will
increase the output to the lower Frequency.
Reset
Resets the sound mode to the default setting.
Digital Audio
Input
HDMI/Display Port: Outputs the sound of digital signal from HDMI through the monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI to the Audio In
port.
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
ENG
ENGLISH
• Clear Voice II 45
46
CUSTOMIZING SETTINGS
TIME Settings
TIME
Move
ENGLISH
ENG
• Clock
1 Press SETTINGS to access the main menus.
ꔋ
• Off Time : Off
2 Press the navigation buttons to scroll to TIME and press OK.
• On Time : Off
3 Press the navigation buttons to scroll to the setting or option
• Sleep Timer : Off
• Power On Delay : Off
you want and press OK.
-To return to the previous level, press BACK.
• Auto Off
OK
: 15 min.
• Automatic Standby: Off
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sets the time to turn on or off the monitor set.
Sleep Timer
Sets the length of time until the monitor set to turns off. When you turn the monitor set off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
yyOff Time/ On Time can be saved for up to seven schedules; the monitor is turned on or off at the preset
time in the schedule list. If multiple preset times are stored in the schedule list, this function works at the
nearest time from the current time.
yyOnce the on or off time is set, these functions operate daily at the preset time.
yyThe scheduled power-off function works properly only when the device time is set correctly.
yyWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the
power-on time if the set is turned on, and vice versa if the set is turned off.
47
CUSTOMIZING SETTINGS
OPTION Settings
OPTION
Move
OK
2 Press the navigation buttons to scroll to OPTION and press
OK.
3 Press the navigation buttons to scroll to the setting or option
you want and press OK.
-To return to the previous level, press BACK.
ꔋ
• ISM Method : Normal
• DPM Select
: On
• Fail Over
: Off
• Factory Reset
• Set ID
:1
• Tile Mode
• PIP/PBP
• Key Lock
4 When you are finished, press EXIT.
: Off
• USB Content Recovery : Off
• Product/Service Info.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a image burn remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent image burn. However, it is best not to allow any fixed image
to remain on the screen. To avoid a permanent image on the screen, the
screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
A user can choose to turn the power saving mode on / off.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
Factory Reset
Select this option to return to the default factory settings.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
ENG
ENGLISH
• Language
1 Press SETTINGS to access the main menus.
48
CUSTOMIZING SETTINGS
Setting
ENGLISH
ENG
Tile Mode
PIP/PBP
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to DVI Cable and distributor.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config.
Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position
Moving the screen position horizontally and vertically.
Size
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
and sub screens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Adjusts the position of the sub screen (top left, bottom left, top right, bottom
right)
The default value is the bottom right.
Size
Adjusts the size of the sub screen (Size 0 to 10).
The default size of PIP (Size: 0) is 480x270; the maximum size 10 is 960x540.
NOTE
yyThe Position and Size options are enabled only in PIP mode.
Key Lock
Turns the local key function on or off. If Key Lock is enabled, the local key does not work.
USB Content
Recovery
Replays the content in a USB when the power is back on if it is turned off during playing a content.
(This function operates the same when a USB is disconnected and connected again.)
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address, Internal
Memroy Info., and home page.
CUSTOMIZING SETTINGS
49
Tile Mode
Off
When the Tile Mode
option is disabled
1X2
When using 2 monitors
ID 1
3X3
When using 9 monitors
2X2
When using 4 monitors
ID 2
ENG
ENGLISH
This monitor can be tiled with additional monitors to create a large tiled display.
ID 1
ID 2
ID 1
ID 2
ID 3
ID 3
ID 4
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
Tile ID
4X4
When using 16 monitors
5X5
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 5
ID 6
ID 7
ID 8
ID 6
ID 7
ID 8
ID 9
ID 10
ID 9
ID 10
ID 11
ID 12
ID 11
ID 12
ID 13
ID 14
ID 15
ID 13
ID 14
ID 15
ID 16
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
50
CUSTOMIZING SETTINGS
PIP/PBP
ENGLISH
ENG
Displays videos or photos stored in the USB device on a single
monitor by dividing it into the main and sub screens. (See page 40.)
Mode
*PIP (Picture In Picture): Displays the Sub screen
in the main screen.
*PBP (Picture By Picture): Displays the Sub
screen next to the main screen.
NOTE
yyThe subscreen is only supported when using the
USB device.
Sub
USB
Sub
screen
Main
screen
Main
PIP
PBP
Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
top left
top right
bottom left
bottom right
AV
X
Component
O
RGB
O
HDMI/ DVI-D/ DP
O
yyYou can only change the size and position in PIP
mode.
yyWith PBP selected, the Aspect Ratio option in the
PICTURE menu is disabled (Fixed as 16:9).
yyWhile running the PBP function, the Tile Mode function
does not work.
yyYou must select the output sound before running
the PIP or PBP functions. (Select either Main or
Sub.)
yyIf you fail to select Main or Sub from the sound
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
yyYou cannot change the sound while running the
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
yyThe picture quality of the subscreen is set
according to the values selected in the main menu,
not the USB device.
yyIf you play videos you selected in PIP/PBP mode,
the videos will play back repeately in succession.
yyThe buttons below work in PIP mode.
Button
Size
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0:
480x270
< 1920x1080 >
Photo
Movie
CUSTOMIZING SETTINGS
Picture ID Settings
3 If you press the left/right buttons or the red ON
AUDIO
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
button for PICTURE ID repeatedly, the Picture
ID toggles between OFF and 0 to 4. Assign the
Set ID as you like.
Picture ID
◄
Off
►
Close
REMOTE
CONTROL IN
1 Assign the Set ID to the installed monitors as
shown below:
IR Receiver
A set with a different Set ID than the Picture
yy
ID cannot be controlled by IR signals.
Please refer to the Installation Manual for
yy
more information on the assigning Total Set
ID.
RS232C cable
Picture ID
Off Close
2X2 Multi-Vision (Total Set ID: 4)
Set IDs are assigned as shown in the picture.
2 Press the ON (Red) button on the remote control to assign the PICTURE ID.
NOTE
If Picture ID is set to 2, the upper right
yy
monitor, that has a Set ID of 2, can be
controlled by IR signals.
If you press the green OFF button for
yy
PICTURE ID, the Picture IDs for all monitors
are turned off. If you then press any button
on the remote control, all monitors can be
controlled by IR signals regardless of Set ID.
The Picture ID function may not work while
yy
MY MEDIA is operating.
ENG
ENGLISH
Picture ID is used to change the settings of a
specific display using a single IR receiver for
multi-vision. Communication is possible between
a monitor with an IR receiver and other monitors
using RS232C cables. Each monitor is identified
by a Set ID. If you assign the Picture ID using
the remote control, only displays with the same
Picture ID and Set ID can be controlled remotely.
(RGB/DVI)
51
52
CUSTOMIZING SETTINGS
NETWORK Settings
NETWORK
Move
ENGLISH
ENG
• Player Name
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NETWORK and
press OK.
ꔋ
• Network Setting
: Wired
• Network Status
: Not connected
• Server IP Setting
• Server IP Status
: Not connected
3 Press the navigation buttons to scroll to the setting or option
you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
OK
Description
Player Name
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Network Setting
Configure the network settings.
Network Status
Display the network status.
- Internet is connected : Extermally connected
- Home network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting
Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
MAKING CONNECTIONS
53
MAKING CONNECTIONS
1 Find an external device you want to connect to your monitor set shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
AV
COMPONENT
HDMI
DVI-D
DVD
AV
COMPONENT
HDMI
DVI-D
Speaker
PC
RGB
HDMI
DVI-D
Display Port
LAN
VCR
AV
COMPONENT
HDMI
DVI-D
USB
Camcorder/Camera
AV
COMPONENT
HDMI
DVI-D
Gaming device
AV
COMPONENT
HDMI
NOTE
If you connect a gaming device to the monitor set, use the cable supplied with the gaming device.
yy
It is recommended you to use the optional speaker provided.
yy
ENG
ENGLISH
Connect various external devices to the ports on the monitor set’s back panel.
54
MAKING CONNECTIONS
ENGLISH
ENG
External Device Connection
COMPONENT Connection
Connect a HD receiver, DVD, or VCR player to the
monitor set and select an appropriate input mode.
Transmits the analog video and audio signals from
an external device to the monitor set. Connect the
external device and the monitor set with the 15
pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
AV(CVBS) Connection
Back of the product.
Transmits the analog video and audio signals
from an external device to the monitor. Connect
the external device and the monitor with the 15
pin signal to RCA cable as shown on the following
illustration.
Back of the product.
VIDEO
OUT
AUDIO
OUT
(not included)
(not included)
(not included)
(not included)
NOTE
When connecting to the component port
yy
using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
MAKING CONNECTIONS
55
DVI Connection
Transmits the digital video and audio signals from
an external device to the monitor set. Connect the
external device and the monitor set with the HDMI
cable as shown on the following illustration.
Transmits the digital video signal from an external
device to the monitor set. Connect the external
device and the monitor set with the DVI cable as
shown in the following illustration. To transmit an
audio signal, connect an optional audio cable.
Back of the product.
Back of the product.
(not included)
(not included)
(not included)
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
ENG
ENGLISH
HDMI Connection
56
MAKING CONNECTIONS
USB Connection
ENGLISH
ENG
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the monitor set and
access the USB menu to use various multimedia
files. LAN Connection
A Using a router (Switch)
LAN
Switch
Monitor Set
PC
Network
or
B Using the Internet.
LAN
Monitor Set
Network
PC
MAKING CONNECTIONS
57
Daisy Chain Connection
1 Connect the input ports of your PC and Monitor 1 using the DVI cable.
2 Connect the output port of Monitor 1 and the input port of Monitor 2 using another DVI cable.
3 Follow the same procedure to connect the other monitors.
DVI mode
Monitor 1
Monitor 2
Monitor 3
DVI Cable
(not included)
NOTE
For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended
yy
resolution) if the signal is stable and there is no cable loss.If you want to connect more than this
number of monitors, we recommended that you use a distributor.
When the tile mode is configured via DVI cables, only the monitor that receives first signals can play
yy
HDCP-encrypted content. (The DVI Out port does not support HDCP.)
If the signal cable between the product and your PC is too long, make sure to use the DVI booster or
yy
DVI optical cable.
If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via
yy
the DVI Out port.
ENG
ENGLISH
This connection is used as an output for the digital video signal of a PC displayed on multiple monitors.
Multiple DVI cables are required to connect multiple monitors.
58
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
No image is displayed
Problem
Resolution
Is the product power cord
yy See if the power cord is properly connected to the outlet.
connected?
Does the Out of range message yy T
he signal from the PC (video card) is out of the vertical or horizontal
appear?
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution : 1920 x 1080 @ 60 Hz
Does the Check signal cable
yy The signal cable between PC and product is not connected. Check
message appear?
the signal cable.
yy Press the 'INPUT' menu in the remote Control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
yy See if the plug&play function is supported by referring to the video
card user manual.
'Key Lock On' message appears.
Problem
The Key Lock On message
appears when pressing the
Menu button.
Resolution
yy The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
TROUBLESHOOTING
59
The screen image looks abnormal.
Resolution
Is the screen position wrong?
yy D-Sub analog signal - Press the AUTO button in the remote control to
automatically select the optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the Position OSD menu.
yy See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel Display Setting menu.
Do thin lines appear on the
yy D-Sub analog signal - Press the AUTO button in the remote control to
background screen?
automatically select an optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the Clock OSD menu.
Horizontal noise appears or the yy D-Sub analog signal - Press the AUTO button in the remote control to
characters look blurred.
automatically select an optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the Phase OSD menu.
The screen is displayed
yy The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
yy When a dark image is displayed on the screen after an image with
high contrast (black and white or gray), this may cause image sticking.
This is normal for LCD screen.
ENG
ENGLISH
Problem
60
TROUBLESHOOTING
The audio function does not work.
ENGLISH
ENG
Problem
No sound?
Sound is too dull.
Sound is too low.
Resolution
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Select the appropriate equalize sound.
yy Adjust the volume.
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
Screen color is unstable or
yy Check the connection status of the signal cable. Or, re-insert the PC
mono-colored.
video card.
Do black spots appear on the
yy Several pixels (red, green, white or black color) may appear on the
screen?
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Resolution
yy Is the sleep timer set?
yy Check the power control settings. Power interrupted.
SPECIFICATIONS
61
ENG
ENGLISH
SPECIFICATIONS
42WL30MS
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
1064.67 mm Wide (42 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1064.67 mm
0.4833 mm (H) x 0.4833 mm (V)
1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Power
Rated Voltage
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB : 30 kHz to 83 kHz
HDMI/ DVI-D/ DP : 30 kHz to 83 kHz
RGB : 50 Hz to 75 Hz
HDMI/ DVI-D/ DP : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
15-pin D-Sub, DVI, HDMI, DP, Audio, Speaker, IR, USB,
RS-232C, LAN
- Using a RGB cable can connect the output connector of
AV(CVBS) or component.
AC 100-240 V~ 50/60 Hz 1.3 A
On Mode : 90 W Typ.
Sleep Mode (RGB) : ≤ 0.5 W
Sleep Mode (DP) : ≤ 0.7 W
Off Mode : ≤ 0.5 W
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
62
SPECIFICATIONS
ENGLISH
ENG
Dimensions
(Width x Height x
Depth) / Weight
963.36 mm x 562 mm x 79 mm / 9.04 kg
963.36 mm x 626.1 mm x 235.1 mm / 10.18 kg
963.36 mm x 562 mm x 79 mm / 9.86 kg
963.36 mm x 626.1 mm x 235.1 mm / 11.0 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
63
ENG
ENGLISH
47WL30MS
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
1192.78 mm Wide (47 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1192.78 mm
0.5415 mm (H) x 0.5415 mm (V)
1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Power
Rated Voltage
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB : 30 kHz to 83 kHz
HDMI/ DVI-D/ DP : 30 kHz to 83 kHz
RGB : 50 Hz to 75 Hz
HDMI/ DVI-D/ DP : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
15-pin D-Sub, DVI, HDMI, DP, Audio, Speaker, IR, USB,
RS-232C, LAN
- Using a RGB cable can connect the output connector of
AV(CVBS) or component.
AC 100-240 V~ 50/60 Hz 1.3 A
On Mode : 100 W Typ.
Sleep Mode (RGB) : ≤ 0.5 W
Sleep Mode (DP) : ≤ 0.7 W
Off Mode : ≤ 0.5 W
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
64
SPECIFICATIONS
ENGLISH
ENG
Dimensions
(Width x Height x
Depth) / Weight
1075 mm x 624.8 mm x 84.5 mm / 12.3 kg
1075 mm x 693.1 mm x 263.9 mm / 13.75 kg
1075 mm x 624.8 mm x 84.5 mm / 13.05 kg
1075 mm x 693.1 mm x 298.3 mm / 14.5 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
65
ENG
ENGLISH
55WL30MS
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
1387.80 mm Wide (55 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1387.80 mm
0.630 mm (H) x 0.630 mm (V)
1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Power
Rated Voltage
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB : 30 kHz to 83 kHz
HDMI/ DVI-D/ DP : 30 kHz to 83 kHz
RGB : 50 Hz to 75 Hz
HDMI/ DVI-D/ DP : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
15-pin D-Sub, DVI, HDMI, DP, Audio, Speaker, IR, USB,
RS-232C, LAN
- Using a RGB cable can connect the output connector of
AV(CVBS) or component.
AC 100-240 V~ 50/60 Hz 1.8 A
On Mode : 140 W Typ.
Sleep Mode (RGB) : ≤ 0.5 W
Sleep Mode (DP) : ≤ 0.7 W
Off Mode : ≤ 0.5 W
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
66
SPECIFICATIONS
ENGLISH
ENG
Dimensions
(Width x Height x
Depth) / Weight
1244.4 mm x 719.9 mm x 82.2 mm / 18.06 kg
1244.4 mm x 787.8 mm x 269.4 mm / 20.2 kg
1244.4 mm x 719.9 mm x 82.2 mm / 18.88 kg
1244.4 mm x 787.8 mm x 269.4 mm / 21.02 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
67
ENG
ENGLISH
60WL30MS
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
1513.397 mm Wide (60 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1513.397 mm
0.687 mm (H) x 0.687 mm (V)
1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Power
Rated Voltage
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB : 30 kHz to 83 kHz
HDMI/ DVI-D/ DP : 30 kHz to 83 kHz
RGB : 50 Hz to 75 Hz
HDMI/ DVI-D/ DP : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
15-pin D-Sub, DVI, HDMI, DP, Audio, Speaker, IR, USB,
RS-232C, LAN
- Using a RGB cable can connect the output connector of
AV(CVBS) or component.
AC 100-240 V~ 50/60 Hz 2.2 A
On Mode : 180 W Typ.
Sleep Mode (RGB) : ≤ 0.5 W
Sleep Mode (DP) : ≤ 0.7 W
Off Mode : ≤ 0.5 W
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
68
SPECIFICATIONS
ENGLISH
ENG
Dimensions
(Width x Height x
Depth) / Weight
1353.8 mm x 781.4 mm x 68.3 mm / 23.12 kg
1353.8 mm x 849.4 mm x 293.8 mm / 25.26 kg
1353.8 mm x 781.4 mm x 68.3 mm / 23.94 kg
1353.8 mm x 849.4 mm x 293.8 mm / 26.08 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
69
Dimensions
(Unit : mm)
42WL30MS
962.2
79
14.4
50.5
19
562
626.1
14.4
148.7
235.1
381.7
200
200
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
ENG
ENGLISH
The illustrations in this manual may differ from the actual product and accessories.
Please see the Mounting on a Wall section for sizes of screws. ( See page 11. )
70
SPECIFICATIONS
Dimensions
(Unit : mm)
47WL30MS
1075
84.5
14.4
51.9
19
624.8
14.4
693.1
263.9
337.5
107.1
400
400
ENGLISH
ENG
The illustrations in this manual may differ from the actual product and accessories.
Please see the Mounting on a Wall section for sizes of screws. ( See page 11. )
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
71
Dimensions
(Unit : mm)
55WL30MS
49.5
1244.4
14.4
82.2
19
719.8
787.8
14.4
295.6
157.6
422.2
400
400
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
ENG
ENGLISH
The illustrations in this manual may differ from the actual product and accessories.
Please see the Mounting on a Wall section for sizes of screws. ( See page 11. )
72
SPECIFICATIONS
Dimensions
(Unit : mm)
60WL30MS
68.3
55.1
14.4
1353.8
19
781.4
14.4
849.4
293.8
189.9
476.9
131
400
400
ENGLISH
ENG
The illustrations in this manual may differ from the actual product and accessories.
Please see the Mounting on a Wall section for sizes of screws. ( See page 11. )
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
73
DTV Mode
RGB (PC) supported mode
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 350
31.469
70.8
720 x 400
31.468
70.8
640 x 480
31.469
59.94
640 x 480
37.5
75
800 x 600
37.879
60.317
800 x 600
46.875
75
832 x 624
49.725
74.55
1024 x 768
48.363
60
1024 x 768
60.123
75.029
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1280 x 1024
79.98
75.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
Resolution
Component
HDMI/
Display Port
(DTV)
480i
o
x
576i
o
x
480p
o
o
576p
o
o
720p
o
o
1080i
o
o
1080p
o
o
NOTE
HDMI/ DVI/ Display Port (PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
PC resolutions available as the input label
yy
option in RGB and HDMI/ DVI/ Display Port
input mode : 640 x 480 / 60 Hz, 1280 x
720 / 60 Hz, 1920 x 1080 / 60 Hz and DTV
resolutions : 480p, 720p, 1080p.
NOTE
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
ENG
ENGLISH
Resolution
74
IR CODES
IR CODES
ENGLISH
ENG
All models do not support the HDMI/USB function.
yy
Some key codes are not supported depending on the model.
yy
Code (Hexa)
08
Function
Note
R/C BUTTON
Power
0B
INPUT
R/C BUTTON
C4
MONITOR ON
R/C BUTTON
C5
MONITOR OFF
95
ENERGY SAVING (
DC
3D
R/C BUTTON
10 to 19
Number Key 0 to 9
R/C BUTTON
53
1/a/A
R/C BUTTON
2F
CLEAR
R/C BUTTON
02
Volume
R/C BUTTON
03
Volume
R/C BUTTON
79
ARC
R/C BUTTON
99
AUTO
R/C BUTTON
09
MUTE
E0
BRIGHTNESS
(Page UP)
R/C BUTTON
E1
BRIGHTNESS
(Page Down)
R/C BUTTON
4D
PSM
R/C BUTTON
AA
INFO ⓘ
R/C BUTTON
5F
W.BAL
R/C BUTTON
43
SETTINGS
R/C BUTTON
40
Up ▲
R/C BUTTON
41
Down ▼
R/C BUTTON
07
Left ◄
R/C BUTTON
06
Right ►
R/C BUTTON
3F
S.MENU
R/C BUTTON
44
OK
R/C BUTTON
28
BACK
R/C BUTTON
5B
EXIT
R/C BUTTON
R/C BUTTON
)
R/C BUTTON
7E
7B
R/C BUTTON
R/C BUTTON
TILE
R/C BUTTON
B1
R/C BUTTON
B0
R/C BUTTON
BA
R/C BUTTON
8F
R/C BUTTON
8E
R/C BUTTON
72
Red Key (PICTURE ID ON)
71
Green Key (PICTURE ID OFF) R/C BUTTON
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
yy
Connecting the Cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
(not included)
PC
Monitor 1
Monitor 2
Monitor 3
Monitor 4
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
Set
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
(Female)
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 BPS
yy
Data Length : 8 bit
yy
Parity Bit : None
yy
Stop Bit : 1bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
3-Wire Configurations (Not Standard)
PC
Set
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
(Female)
D-Sub 9
(Female)
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
75
76
CONTROLLING THE MULTIPLE PRODUCT
Command Reference List
ENGLISH
ENG
COMMAND
DATA
(Hexadecimal)
1
2
01. Power k
a
00 to 01
02. Input Select
x
b
Refer to Input Select.
03. Aspect Ratio k
c
Refer to Aspect Ratio.
04. Energy Saving
j
q
Refer to Energy Saving.
05. Picture mode d
x
Refer to Picture mode.
06. Contrast k
g
00 to 64
07. Brightness k
h
00 to 64
08. Sharpness k
k
00 to 64
09. Color k
i
00 to 64
10. Tint k
j
00 to 64
11. Color Temperature x
u
00 to 64
12. H Position
f
q
00 to 64
13. V Position
f
r
00 to 64
14. H Size
f
s
00 to 64
15. Auto configuration
j
u
01
16. Balance k
t
00 to 64
17. Sound mode d
y
Refer to Sound mode.
18. Treble
k
r
00 to 64
19. Bass
k
s
00 to 64
20. Speaker d
v
00 to 01
21. Volume Mute k
e
00 to 01
22. Volume Control k
f
00 to 64
23. Time 1 (Years/ Months/ Days)
f
a
Refer to Time 1.
24. Time 2 (Hours/ Minutes/Seconds)
f
x
Refer to Time 2.
25. Off Timer (Repeat mode/ Time)
f
e
Refer to Off Timer.
26. On Timer (Repeat Mode/ Time)
f
d
Refer to On Timer.
27. On Timer Input
f
u
Refer to On Timer Input.
28. Sleep Time f
f
00 to 08
29. Power On Delay
f
h
00 to 64
30. Automatic Standby
m
n
00 to 01
31. Auto Off
f
g
00 to 01
32. Language f
i
Refer to Language.
33. Power Indicator (Standby Light)
f
o
00 to 01
34. Power Indicator (Power Light)
f
p
00 to 01
35. ISM mode j
p
Refer to ISM Method.
36. Fail Over Select
m
i
00H to 02H
37. Fail Over Input Select
m
j
Refer to Fail Over Input Select.
38. Reset f
K
00 to 02
CONTROLLING THE MULTIPLE PRODUCT
DATA
(Hexadecimal)
2
39. Tile Mode d
d
00 to 01
40. Tile Mode Check
d
z
FF
41. Tile ID
d
i
Refer to Tile ID.
42. Tile H Position d
e
00 to 32
43. Tile V Position d
f
00 to 32
44. Tile H Size d
g
00 to 32
45. Tile V Size d
h
00 to 32
46. Natural Mode (In Tile mode)
d
j
00 to 01
47. DPM Select
f
j
00 to 01
48. FAN Control
d
o
00H to 03
49. FAN Fault Check
d
w
FF
50. Temperature Value
d
n
FF
51. Remote Lock/ key Lock
k
m
00 to 01
52. Key
m
c
Refer to Key.
53. OSD Select k
l
00 to 01
54. Elapsed time return d
l
FF
55. Serial No. Check f
y
FF
56. S/W Version
f
z
FF
57. White Balance Red Gain
j
m
00 to FE
58. White Balance Green Gain
j
n
00 to FE
59. White Balance Blue Gain
j
o
00 to FE
60. Backlight
m
g
00 to 64
61. PC Power Control
d
t
00 to 01
62. PC Power
d
s
00 to 01
63. Smart BLU Control Mode
m
s
u
v
00 to 01
66. Status check
s
s
m
s
67. BLU Maintenance
m
t
00 to 01
64. Smart BLU Control Schedule
65. Reading luminance values
Refer to Smart BLU Control Schedule
Refer to Reading luminance values
Refer to Status check
Note : During USB operations such as Dvix or EMF, all commands except Power(k a) and Key(m c)
yy
are not executed and treated as NG.
ENG
ENGLISH
COMMAND
1
77
78
CONTROLLING THE MULTIPLE PRODUCT
Transmission / Receiving Protocol
ENGLISH
ENG
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0x0D’.
* [ ]: ASCII code space ‘0x20’
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* When the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is
in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the
data that is sent from the PC.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and they do send any
acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
* Some commands are not supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
To control the Power On/Off the display.
Data 00 : Off
01 : On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Only when the monitor set is fully powered on, the
Acknowledgement signal is returned properly.
* There may be a certain time of delay between the
Transmission and Acknowledgement signals.
04. Energy Saving (Command: j q)
To set the Energy Saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03. Maximum
04: Auto
05. Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
02. Input Select (Command: x b)
To select the Input Source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: Input (AV)
40: Component
60: RGB
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(HDMI1)(DTV)
A0: HDMI(HDMI1)(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
91: HDMI2/SDI(DTV)
A1: HDMI2/SDI(PC)
B0: SuperSign
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
05. Picture Mode (Command: d x)
To select the Picture Mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported
depending on the model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
02: 16:9
04: Zoom
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
09: Just scan (720p or more)
(Component, HDMI/ DVI-D/ Display Port DTV)
* RGB, DVI-D, HDMI/Display Port PC mode (1:1)
10 to 1F: Cinema Zoom 1 to 16
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
* Available data types differ depending on the input
signal. For more information, see the aspect ratio
section of the owner's manual.
* The aspect ratio may differ depending on the
model's input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
79
80
CONTROLLING THE MULTIPLE PRODUCT
07. Brightness (Command: k h)
To adjust the screen brightness.
ENGLISH
ENG
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
To adjust the screen sharpness.
* This function is available only in AV/Component
input.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust the screen color.
* This function is available only in AV/Component
input.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
To adjust the screen tint.
* This function is available only in AV/Component
input.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint R50 to G50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
To adjust the screen Color Temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
12. H Position (Command: f q)
To adjust the screen Horizontal Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. -50 (Left) to max. 50 (Right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
16. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to 64: min. -50 (Bottom) to max. 50 (Top)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
14. H Size (Command: f s)
To adjust the screen Horizontal Size.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data 00 - 64: Min. -50 (Reduce) - Max. 50 (Expand)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Auto Configuration (Command: j u)
To adjust the picture position and minimize image
shaking automatically.
(Only available for RGB-PC input.)
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
To select the Sound Mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sport
05. Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
To adjust the Treble values.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
13. V Position (Command: f r)
To adjust the screen Vertical Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
81
82
CONTROLLING THE MULTIPLE PRODUCT
19. Bass (Command: k s)
To adjust the Bass values.
ENGLISH
ENG
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Bass 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
To select the speaker on/off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
22. Volume Control (Command: k f)
To set the playback volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
23. Time 1(Year/ Month/ Day) (Command: f a)
To set the Time 1(Year/ Month/ Day) values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 100 to 14: 2010 to 2030
Data 201 to 0C: January to December
Data 301 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1(Year/
Month/ Day) values.
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
21. Volume Mute (Command: k e)
To control the Volume Mute on/off.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Mute (Volume Off)
01 : Current volume (Volume On)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
24. Time 2(Hour/ Minute/ Second) (Command: f x)
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 17: 00 to 23 hours
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2(Hour/
Minute/ Second) values.
** This command won’t work if Time 1(Year/ Month/
Day) has not been set in advance.
Acknowledgement [x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
CONTROLLING THE MULTIPLE PRODUCT
83
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st Off Time data
F2: Read the 2nd Off Time data
F3: Read the 3rd Off Time data
F4: Read the 4th Off Time data
F5: Read the 5th Off Time data
F6: Read the 6th Off Time data
F7: Read the 7th Off Time data
2. E1 to E7 (Delete one index), E0 (Delete all
indexes)
E0: Delete all Off Time data
E1: Delete the 1st Off Time data
E2: Delete the 2nd Off Time data
E3: Delete the 3rd Off Time data
E4: Delete the 4th Off Time data
E5: Delete the 5th Off Time data
E6: Delete the 6th Off Time data
E7: Delete the 7th Off Time data
3. 01 to 0C (Set the day of week for Off Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fe 01 f1 ff ff - Read the 1st Off Time
data.)
(Example 2: fe 01 e1 ff ff - Delete the 1st Off Time
data.)
(Example 3: fe 01 04 02 03 - Set the Off Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st On Time data
F2: Read the 2nd On Time data
F3: Read the 3rd On Time data
F4: Read the 4th On Time data
F5: Read the 5th On Time data
F6: Read the 6th On Time data
F7: Read the 7th On Time data
2. E1 to E7 (Delete one index), E0 (Delete all
indexes)
E0: Delete all On Time data
E1: Delete the 1st On Time data
E2: Delete the 2nd On Time data
E3: Delete the 3rd On Time data
E4: Delete the 4th On Time data
E5: Delete the 5th On Time data
E6: Delete the 6th On Time data
E7: Delete the 7th On Time data
3. 01 to 0C (Set the day of week for On Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fd 01 f1 ff ff - Read the 1st On Time
data.)
(Example 2: fd 01 e1 ff ff - Delete the 1st On Time
data.)
(Example 3: fd 01 04 02 03 - Set the On Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENG
ENGLISH
25. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat Mode/ Time) function.
84
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
27. On Timer Input (Command: f u)
To select an external input for the current On Time
setting and add a new schedule or change the
existing schedule.
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
Data (Add schedule)
20: Input (AV)
40: Component
60. RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
Data1 (Change schedule)
1. F1 to F7 (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component
60: RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
* To read the schedule input, enter FFH for [Data2].
If no schedule is available for [Data1] when
attempting to read or change the schedule data, the
text NG will be displayed and the operation fails.
(Example 1: fu 01 60 - Move each schedule input
down one row and save the 1st schedule input in
RGB mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input.)
(Example 3: fu 01 f3 20 - Change the 3rd data
schedule input to the current On Time and AV input.
If there is no third schedule, the text NG will be
displayed and the operation fails.)
* This function is supported only when 1 (Year/Month/
Day), 2 (Hour/Minute/Second), On Time (Repeat
Mode/Time) are set.
** It may not be supported depending on the model.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
28. Sleep Time (Command: f f)
To set the Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00: Off (Sleep Timer off)
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on. (Unit: Second)
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to max. 100 (sec.)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
30. Automatic Standby (Command: m n)
To set the Automatic Standby function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 4 hours)
01: 4 Hours (Off after 4 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
31. Auto Off (Command: f g)
To set the Auto Off function.
Data 00: Off (No off after 15 minutes)
01: 15 min.(Off after 15 minutes)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
To set the language for OSD.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish (EU)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese (Cantonese)
34. Power Indicator (Power Light) (Command: f p)
To set the Power Indicator (Power Light) function.
Transmission
[f][p][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
35. ISM mode (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08. Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
33. Power Indicator (Standby Light) (Command: f o)
To set the Power Indicator (Standby Light) function.
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
36. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
85
86
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
37. Fail Over Input Select (Command: m j)
To select the input source for auto switch.
* This command is only available when the fail over
(auto) mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[ ][Data4][ ][Data5][Cr]
Data 1 to 5 (Priority 1 to 5)
60: RGB
70: DVI-D
90: HDMI(HDMI1)
C0: Display Port
91: HDMI2/SDI
* The number of data items differs depending on the
model.
40. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Check Tile Mode status.
** It may not be supported depending on the model.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
Data2
Data3
00: Tile Mode Off
01: Tile Mode On
00 to 0F: Tile Row
00 to 0F: Tile Column Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[ ][Data5][x]
41. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
38. Reset (Command: f k)
To execute the Picture, Screen, Audio and Factory
reset function.
(Screen Reset can only be performed in RGB input
mode.)
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile
Row).
** It may not be supported depending on the model.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
*NG will be return if data is over (Tile Column) x (Tile
Row), except 0xFF.
00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
42. Tile H Position (Command: d e)
To adjust the Tile Horizontal position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
39. Tile Mode (Command: d d)
To set a Tile Mode and Tile Column/ Row values.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: 1st byte - Tile Row
2nd byte - Tile Column
*00, 01, 10, 11 means Tile Mode Off
** It may not be supported depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 32: -50 (Left) to 0 (Right)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 0 to 32: 0 (Bottom) to 50 (Top)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
44. Tile H Size (Command: d g)
To adjust the Tile Horizontal Size.
*Set Tile H Position to 0x32 before setting Tile H
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
46. Natural Mode (In Tile Mode) (Command : d j)
To display the image naturally, the part of the image
that would normally be displayed in the gap between
the monitors is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
47. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
* Data settings may vary depending on your model
as below.
Data 00: Off
01: 5 sec.
02: 10 sec.
03: 15 sec.
04: 1 min.
05: 3 min.
06: 5 min.
07: 10 min.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Tile V Size (Command: d h)
To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
48. FAN Control (Command : d o)
To set the Fan mode.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
03: Off
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
43. Tile V Position (Command: d f)
To adjust the Tile Vertical position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
87
88
CONTROLLING THE MULTIPLE PRODUCT
49. FAN Fault Check (Command: d w)
To check the fan errors.
ENGLISH
ENG
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Fan fault
01: Fan OK
02: Model without a Fan
50. Temperature Value (Command: d n)
To check the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
52. Key (Command: m c)
To send a key code of the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For a key code, see the IR Code.
* Some key codes are not supported depending on
the model.
53. OSD Select (Command: k l)
To select OSD(On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed in hexadecimal.
51. Remote Controller Lock/ Key Lock
(Command: k m)
When the remote control and front keys are locked in
standby mode, the power cannot be turned on using
the remote control or front power button.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01: On (Lock On)
* Display will not be turned on by power on key of
remote controller and front panel control keys, if key
is locked on in standby mode.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
54. Elapsed time return (Command: d l)
To check the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
CONTROLLING THE MULTIPLE PRODUCT
55. Serial No.Check (Command: f y)
To check the Serial Numbers.
Data FF: Check the product Serial Number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
58. White Balance Green Gain (Command: j n)
To set the White Balance Green Gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green Gain 0 to 254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
56. S/W Version (Command: f z)
To check the Software Version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check the Software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
57. White Balance Red Gain (Command: j m)
To set the White Balance Red Gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red Gain 0 to 254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
59. White Balance Blue Gain (Command: j o)
To set the White Balance Blue Gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue Gain 0 to 254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
60. Backlight (Command: m g)
To adjust the screen backlight.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
** It may not be supported depending on the model.
ENG
ENGLISH
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
89
90
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
61. PC Power Control (Command: d t)
To control the PC power if the PC and the monitor
are synchronized.
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
Data
00: Synchronized (When the monitor is off, the PC is
also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
** It may not be supported depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
62. PC Power (Command: d s)
Control the PC power.
Transmission
[d][s][ ][Set ID][ ][Data][Cr]
Data 00: PC is turned off.
01: PC is turned on.
** It may not be supported depending on the model.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
64. Easy Brightness Control Schedule (Command: s
s)
Sets the Easy Brightness Control Schedule.
Transmission
[s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 - F6 (Data Reading Functions)
F1: Reads the data of the 1st Easy Brightness
Control
F2: Reads the data of the 2nd Easy Brightness
Control
F3: Reads the data of the 3rd Easy Brightness
Control
F4: Reads the data of the 4th Easy Brightness
Control
F5: Reads the data of the 5th Easy Brightness
Control
F6: Reads the data of the 6th Easy Brightness
Control
2. E1-E6 (Deletes One Index), E0 (Delete All
Indexes)
E0: Deletes all Easy Brightness Controls
E1: Deletes the 1st Easy Brightness Control
E2: Deletes the 2nd Easy Brightness Control
E3: Deletes the 3rd Easy Brightness Control
E4: Deletes the 4th Easy Brightness Control
E5: Deletes the 5th Easy Brightness Control
E6: Deletes the 6th Easy Brightness Control
3. 00-17: 00 - 23:00
Data2 00-3B: 00 - 59 minutes
Data3 00-64: backlight 0 - 100
* To read or delete the configured Easy Brightness
Control list, set [Data2][Data3] to FF.
(ex1: ss 01 f1 ff ff - Reads the 1st index data from the
Easy Brightness Control.
ex2: ss 01 e1 ff ff - Deletes the 1st index data from
the Easy Brightness Control.
ex3: ss 01 07 1E 70 - Adds a schedule to the
backlight 70 at 07:30.)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
** It may not be supported, depending on the model.
63. Easy Brightness Control Mode (Command: s m)
Selects ON/OFF of Easy Brightness Control Mode.
Transmission
[s][m][ ][Set ID][ ][Data][Cr]
Data 00: Easy Brightness Control OFF
01: Easy Brightness Control ON
* It does not work if the current time is not set up.
** It may not be supported, depending on the model.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
65. Reading luminance values (Command: m u)
Reads luminance values.
Acknowledgement
[u][][SetID][][OK/NG][Data1][Data2][Data3][Data4][Data5][x]
Data1 00-64 backlight 0-100
Data2 00-ff: Upper 2-byte of CA210 measured value
Data3 00-ff: Lower 2-byte of CA210 measured value
CA210 measured value Hex: 0000-ffff, Decimal: 0 65535
Data4 00-ff: Upper 2-byte of BLU measured value
Data5 00-ff: Lower 2-byte of BLU measured value
Data6 00-ff: Upper 2 bytes of BLU No. 2 sensor
measured value
Data7 00-ff: Lower 2 bytes of BLU No. 2 sensor
measured value
BLU measured value Hex: 0000-ffff, Decimal: 0 - 65535
* CA210 measured value is entered through the
calibration procedure during final assembly. Default
value is 0 before calibration.
** It may not be supported, depending on the model.
66. Status check (Command: s v)
Check various statuses.
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data 05: Check the normal operation of No.1 and
No.2 luminance sensors.
06: luminance sensor being used:
07: Check the normal operation of top, bottom,
or main temperature sensors.
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
When the Data is 05
Data100: All normal
01: BLU sensor 1 normal, BLU sensor 2 fail
02: BLU sensor 1 fail, BLU sensor 2 normal
03: All fail
When the Data is 06
Data100: No.1 luminance sensor is being used
01: No.2 luminance sensor is being used
When the Data is 07
Data100: All temperature sensors fail
01: Top normal, Bottom fail, Main fail
02: Top fail, Bottom normal, Main fail
03: Top normal, Bottom normal, Main fail
04: Top fail, Bottom fail, Main normal
05: Top normal, Bottom fail, Main fail
06: Top fail, Bottom normal, Main fail
07: All temperature sensors normal
When the Data is 08
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][Data3][x]
Data1: Temperature of the top sensor area when the
set is powered off.
Data2: Temperature of the bottom sensor area when
the set is powered off.
Data3: Temperature of the main sensor area when
the set is powered off.
When the Data is 09
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][x]
Data1 00-ff: Upper 2-byte of Fan Speed
Data2 00-ff: Lower 2-byte of Fan Speed
Fan Speed: Hex 0-20D0, Decimal 0-8400
** It may not be supported, depending on the model.
ENG
ENGLISH
Transmission
[m][u][ ][Set ID][ ][FF][Cr]
91
92
CONTROLLING THE MULTIPLE PRODUCT
67. BLU Maintenance (Command: m t)
Select ON/OFF of BLU Maintenance.
ENGLISH
ENG
Transmission
[m][t][ ][Set ID][ ][Data][Cr]
Data 00: BLU Maintenance OFF
01: BLU Maintenance ON
** It may not be supported, depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
68. Screen mute (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Turns the screen on.
01: Turns the screen off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
E N E RGY STA R i s a s et of p owe rsaving guidelines issued by the U.S.
Environmental Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc. has
determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual (CD) in an
accessible place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.
Temporary noise is normal when powering ON or
OFF this device.
Download PDF