LG | 47WV30BS-B | LG 47WV30B Owner’s Manual

ENG
ENGLISH
OWNER’S MANUAL
SIGNAGE DISPLAY
Please read this manual carefully before operating the your set and
retain it for future reference.
SIGNAGE DISPLAY MODELS
47WV30BS
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
CONTENTS
4
ASSEMBLING AND PREPARING
23
Adjusting the screen
23
- Selecting an image mode
4
Unpacking
23
- Customizing image options
5
Parts
24
- Customizing PC display options
6
To install in a Portrait Layout
24
Adjusting the sound
6
Remove L-brackets before Installation
24
- Selecting an sound mode
7
Moving Handles
25
- Customizing sound options
7
- Moving the device in a vertical position
25
Using additional options
7
- Moving the device in a horizontal posi-
25
- Adjusting aspect ratio
tion
STORAGE METHOD FOR PANEL PRO-
27 ENTERTAINMENT
TECTION
27
- Connecting to a wired network
- Correct Method
28
- Network Status
8
- Incorrect Method
29
- Connecting USB storage devices
9
Installing on a wall
30
- Browsing files
10
EXTERNAL EQUIPMENT SETUP
31
- Viewing movies
10
- IR RECEIVER
35
- Viewing photos
11
Tiling Displays
37
- Listening to music
11
- How to Join Sets - Installing Set 1
39
- DivX® VOD Guide
12
- How to Join Sets - Installing Set 2
13
- How to Join Sets - Installing Set 3
14
- How to Join Sets - Installing Set 4
15
Inserting the Cable Holder
8
8
41 CUSTOMIZING SETTINGS
41
Accessing main menus
42
- PICTURE settings
16 REMOTE CONTROL
44
- AUDIO settings
45
- TIME settings
18
Displaying the device name connected to
46
- OPTION settings
an input port
48
- NETWORK settings
19
Picture ID
20 USING THE MONITOR SET
49 MAKING CONNECTIONS
50
Connecting to a HD receiver, DVD or
20
Connecting to a PC
20
- RGB connection
50
- HDMI connection
21
- DVI to DVI connection
50
- DVI - HDMI connection
21
- HDMI connection
51
- AV connection
22
- Audio connection
51
Connecting to a USB
22
- IR Receiver connection
VCR player
TABLE OF CONTENTS
Connecting to the LAN
51
- LAN connection
52
Daisy Chain Monitors
52
- RGB Cable
52
- DVI Cable
53 TROUBLESHOOTING
53
General
55 SPECIFICATIONS
57 RS-232 CONTROL
67 LICENSE
NOTE
The following three phenomena may occur due to the characteristics of the Super Narrow Bezel
yy
LCD. They are not related to the display's performance.
1. The edges of the screen may become darker or shadows may appear.
2. Light leakage may occur depending on the viewing angle.
3. Some components such as the guide boss or clip may be visible on the edges of the screen.
ENG
ENGLISH
51
3
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
Power Cord
RGB Cable
DVI Cable
CD (Owner's Manual) /
Card
POWER
ENERGY
MONITOR
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
IR Receiver
MNO
RS-232C Cable
Guide bracket
M4 x 10L
Screw (4ea)
M6
Screw (4ea)
Ring Core
Power cable holder
U-shaped fixture
Cable holder
(2ea)
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
S.MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
Remote control and Batteries
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
How to Use a Ring Core
yy
A ring core reduces electromagnetic waves emitted from the IR receiver.
Loop the cable through the core once, before using it as illustrated.
Ring Core
ASSEMBLING AND PREPARING
5
Parts
ENG
ENGLISH
RS-232C
(CONTROL)
DVI OUT
DVI IN
/DVI
USB
RGB OUT
AUDIO
(RGB/DVI)
LAN
AUDIO
SPEAKER
(8Ω)
RGB IN
REMOTE
CONTROL IN
COMPONENT IN
Connection panel (See p.50 to p.51)
6
ASSEMBLING AND PREPARING
To install in a Portrait Layout
ENGLISH
ENG
When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
Remove L-brackets before Installation
Remove the L-brackets from each corner of the monitor before installing it.
NOTE
Keep the removed L-brackets and use them when moving the monitor later.
ASSEMBLING AND PREPARING
7
Moving Handles
Moving the device in a horizontal
position
Hold the vertical handles on the left and right
sides or the left and right handles on the back of
the display.
Have the screen facing down and hold the vertical
handles on the left and right sides.
Left and right handles
at the back
Vertical handle
on the side
Vertical handle
on the side
RS-232C
(CONTROL)
DVI OUT
DVI IN
/DVI
USB
RGB OUT
AUDIO
(RGB/DVI)
LAN
AUDIO
SPEAKER
(8Ω)
RGB IN
REMOTE
CONTROL IN
COMPONENT IN
CAUTION
Be careful not to directly touch the panel or expose it to shock when moving the monitor.
yy
Hold the monitor with the handles as the corners of the front panel are sharp, which may cause an
yy
injury.
ENG
ENGLISH
Moving the device in a vertical
position
8
ASSEMBLING AND PREPARING
STORAGE METHOD FOR PANEL PROTECTION
ENGLISH
ENG
Correct Method
Incorrect Method
Panel
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully
for. Do not let the panel not to touch the floor.
Panel
If the product is tilted onto the bezel, the bottom of
the panel may be damaged.
Cushion
Panel
When laying down the product, lay a cushion on a
flat floor. Put the product on it with the panel of
the product facing down.
Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.
If there is not a cushion available, ensure the floor is
clean and then lay the product down carefully with the
panel facing either upward or downward. At this time,
be careful for objects not to fall on the panel.
ASSEMBLING AND PREPARING
Installing on a wall
CAUTION
10 cm
20 cm
10 cm
10 cm
If you want to mount the monitor on the wall (optional), attach the wall mounting bracket to the rear
of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
Use the wall mount plate and screws that comply
with the VESA standard.
Use the wall mount plate and screws conforming
to the VESA standard.
NOTE
Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in a
closet) or on a carpet or cushion. If there is
no other option but to mount the product on
the wall, make sure that sufficient ventilation
is provided before installation.
- Failure to do so may result in a fire due to
the increase in the internal temperature.
Disconnect the power cord first, and then
yy
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
yy
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the Monitor set and void
your warranty.
Use the screws and wall mounts that
yy
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
NOTE
Use the screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Be sure to use the proper
length.
For more information, refer to the
yy
instructions supplied with the wall mount.
ENG
ENGLISH
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
10 cm
9
10
ASSEMBLING AND PREPARING
EXTERNAL EQUIPMENT SETUP
ENGLISH
ENG
IR RECEIVER
This allows a remote control sensor to be placed
in a custom location. Then that display can control
other displays via an RS-232 cable. Refer to page
19 for more information.
AUDIO
(RGB/DVI)
REMOTE
CONTROL IN
ASSEMBLING AND PREPARING
11
Tiling Displays
ENG
ENGLISH
How to Join Sets - Installing Set 1
*Example of 2 x 2 tiling
* The numbers assigned in this example (#1, #2, #3, #4) are used to demonstrate the installation procedure
to ensure it is easy to follow. These numbers have nothing to do with the Set ID that is used to operate the
remote control.
Set the guide bracket into the bracket groove using screws and mount the set to the wall mount plate or
the wall.
Guide bracket
Screws for fixing the
VESA wall mount
Guide bracket
Wall mount plate
<Rear view of the set with the wall mount plate>
* The wall mount plate is shaded in gray in the illustration to help you see it.
Screws for fixing
the guide bracket
12
ASSEMBLING AND PREPARING
How to Join Sets - Installing Set 2
ENGLISH
ENG
Join Set 2 to Set 1 using the guide brackets on the top side of Set 1 and mount the two sets to the wall
mount plate or the wall.
Remove the guide brackets after mounting the sets.
<The sets joined with the guide brackets>
Guide bracket
<The sets after removing the guide brackets>
Remove the
guide brackets
<Rear view of the set with the wall mount plate>
How to remove the guide brackets
* Unscrew the guide bracket screws from the rear of the set and remove the guide brackets.
* Once the screws are removed, the guide brackets will drop. You need to remove them through the gap
on the sides of the set.
* This can be done only when there is enough space between the set and the wall mount plate or the wall
to unscrew the screws. (Please check whether there is enough space to remove the screws before fixing
the guide brackets.)
<Removing the guide bracket through
the side gap>
ASSEMBLING AND PREPARING
13
How to Join Sets - Installing Set 3
#2
#1
#3
<Joined Sets 1 and 2>
<Set 3 to be joined>
Minimize the space between the sides of the sets using the U-shaped fixture.
When the sets are joined with the minimum amount of space between them, firmly mount them to the wall
mount plate or the wall.
When the sets are firmly mounted to the wall, remove the U-shaped fixtures.
U-shaped fixture
U-shaped fixture
ENG
ENGLISH
Fix the guide brackets to Set 3 following the steps above, and loosely mount the set to the wall mount
plate or the wall.
14
ASSEMBLING AND PREPARING
How to Join Sets - Installing Set 4
ENGLISH
ENG
Loosely mount Set 4 to the wall mount plate or the wall and minimize the space between the sets using
the U-shaped fixtures.
When Set 4 is firmly mounted to the wall, remove the U-shaped fixtures.
Remove the guide brackets. See <How to Join Sets - Installing Set2,3>.
Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
Wall mount plate or wall
Display set
NOTE
yyThe guide brackets for tiling should only be used to join sets and should be removed once they are joined.
yyThe guide brackets should only be used as the assisting tool when tiling sets. The load applied to each set
should be supported by the wall mount plate or the wall using a VESA wall mount (800 x 400).
yy(Each set must be firmly mounted to the wall mount plate or the wall.)
yyThe guide brackets must be removed once the sets are joined. When joining the sets without removing the
guide brackets, extra caution is required to prevent damage due to the set weight.
yyThe U-shaped fixtures must also be removed after mounting the set to the wall mount plate or the wall.
yyYou may mount the set without using the guide brackets or the U-shaped fixtures; this does not affect the
performance of the device.
ASSEMBLING AND PREPARING
15
Inserting the Cable Holder
As illustrated, screw the power cable holder into
the hole on the bottom rear of the set to hold the
power cables together. (This is to put the power
cables inside the holder.)
ENG
ENGLISH
As illustrated, insert two cable holders into the
holes at the bottom rear of the set to organize the
cable bundles.
16
REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please
read this manual carefully and use the Monitor set correctly.
POWER
To replace batteries, open the battery cover, replace
batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery
cover. To remove the batteries, perform the installation
actions in reverse.
ENERGY
MONITOR
INPUT
OFF
ON
1
4
7
.,!
GHI
PQRS
1/a/A
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
OFF
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control to the remote control sensor on the Monitor set.
Power On / Off
Switches the set on from
standby or off to standby.
Monitor On / Off
Turn off the monitor and then
turn it back on.
Energy Saving
Adjust the Energy Saving
mode of the SET.
ENERGY
MONITOR
INPUT
OFF
ON
1/a/A
This button selection is not
applicable.
INPUT
If you press the button once, the
following Input Signal Window
will appear. Select the signal
type you want using the button.
POWER
.,!
GHI
PQRS
1/a/A
PSM
Selects the Picture Status
Mode.
SAVING
TUV
-*#
CLEAR
ABC
JKL
Number and Alphabet
Type numbers.
The alphabet selection is not
applicable.
DEF
MNO
Clear
This button selection is not
applicable.
WXYZ
MARK
ARC
PSM
Volume Up/Down
Adjusts the volume.
BRIGHT
NESS
MUTE
MENU
AUTO
S.MENU
OK
BACK
TILE
ID
ON
OFF
EXIT
P
A
G
E
ARC
Selects the Aspect Ratio Mode.
BRIGHTNESS
Moves to the previous or next
screen.
MUTE
Switches the sound on or off.
17
REMOTE CONTROL
POWER
ENERGY
MONITOR
INPUT
OFF
ON
1
4
7
.,!
GHI
PQRS
1/a/A
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
ENERGY
MONITOR
MENU(See p.41)
Selects a menu.
Clears all on-screen displays
and returns to Set viewing
from any menu.
Up/Down/Left/Right
Allows you to navigate the
on-screen menus and adjust
the system settings to your
preference.
.,!
GHI
PQRS
1/a/A
ID ON/OFF
Allows you to set the Picture
ID or turn it off. Use this
button to control the individual
monitors connected in RS232C mode. (It works properly
only when Set IDs are
assigned.)
USB Menu control
Controls media playback.
TUV
-*#
CLEAR
JKL
BACK
E
S.MENU
TILE
EXIT
ID
ON
OFF
DEF
MNO
WXYZ
ARC
PSM
AUTO
OK
SAVING
ABC
P
BRIGHT A
NESS G
MUTE
MENU
MARK
P
BRIGHT A
NESS G
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
E
MUTE
MENU
OK
Accepts your selection or
displays the current mode.
BACK
Allows the user to move
back one step in an interactive
application.
PSM
OFF
ON
INPUT
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
TILE
ID
ON
OFF
EXIT
EXIT
Clears all on-screen displays
and returns to Monitor set
viewing.
TILE
Selects the TILE Mode.
ENG
ENGLISH
POWER
.,!
DEF
.,!
ABC
DEF
1/a/A
1/a/A
CLEAR
CLEAR
Displaying the device name connected to an input port
18
ABC
GHI
REMOTE CONTROL
PQRS
JKL
MNO
GHI
JKL
MNO
TUV
WXYZ
PQRS
TUV
WXYZ
-*#
-*#
MARK
MARK
ARC
ENGLISH
ENG
PSM
ARC
BRIGHT
NESS
P
A
G
E
MUTE
Display which devices are connected to which
external input ports.
AUTO
MENU
S.MENU
1 Access the Input list screen and press the blue
(input label) button onOKthe remote control.
BACK
TILE
EXIT
ID
ON
OFF
2 You can assign an input label for every input
except USB.
Input Label
Component
RGB
HDMI
DVI-D
Close
PSM
P
BRIGHT A
NESS G
E
MUTE
NOTE
MENU
AUTO
S.MENU
External inputs supported: Component,
yy
RGB, HDMI, DVI-D
Labels available : VCR, DVD, Set top box,
yy
OK
Satellite, Game, PC, Blue-ray, HD-DVD
The input labels are displayed on the Input
yy
Label screen or at the top left of the screen
when you change
the external
input
EXIT
BACK
TILE
ID
setting.
OFF
ON
For DTV/PC-compatible
signals, such as
yy
1080p 60 Hz, the screen settings may
change according to the input label. The
Just Scan option is available if a PC is
connected as an external device.
REMOTE CONTROL
19
Picture ID
POWER
1
ENERGY
SAVING
RS232C
1/a/A
CLEAR
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
2
Picture ID

Off

Close
WXYZ
-*#
P
BRIGHT A
NESS G
E
4
MUTE
2X2 Multi-Vision
(Total Set ID: 4)
Set IDs are assigned as shown in the picture.
AUTO
S.MENU
1 Press the red ON button on the remote control
to assign the PictureOKID.
TILE
ID
ON
OFF
EXIT
▶
ENERGY
INPUT
Close
If you assign the Set ID to each set with
yy
and the Picture ID
multi-vision,
then assign
using the red button on the remote control,
the key command is displayed for the set
1/a/A Set
with the same
Picture ID. A set
ID andCLEAR
.,!
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
-*#
ARC
BACK
OFF
Off
SAVING
MARK
PSM
◀
MONITOR
ON
.,!
MENU
Picture ID
INPUT
OFF
3
ON button repeatedly, the Picture ID cycles
through OFF and 0 to 4. Assign the ID you
want.
POWER
MONITOR
IR Receiver
ON
2 If you press the left/right buttons or press the
MARK and Picture IDs cannot
with different Set IDs
be controlled by IRARC
signals.
P
For more information
how Ato assign the
yy
PSM onBRIGHT
NESS G
E
Set ID, see "Set ID" on page See
p.46.
MUTE
MENU
NOTE
AUTO
S.MENU
OK
For example, if the Picture ID is assigned
yy
to 2, the upper right display (Set ID: 2) can
be controlled
EXIT
BACKby IR
TILEsignals.
For each set, IDyou can change the
yy
OFF
ON
settings for the PICTURE, AUDIO, TIME,
NETWORK and MY MEDIA menus or the
hot keys on the remote control.
If you press the green OFF button for
yy
Picture IDs, the Picture IDs for all sets are
turned off. If you then press any button
on the remote control, all sets will start
working again.
Picture ID will be disabled while using the
yy
MY MEDIA menu.
ENG
ENGLISH
Picture ID is used to change the settings of a
specific display using a single IR receiver for
multi-vision. The set receiving the IR signal
communicates with another set via an RS232
connection. Each set is identified by a Set ID. If
you assign the Picture ID using the remote control,
only displays with the same Picture ID and Set ID
can be controlled remotely.
20
USING THE MONITOR SET
ENGLISH
ENG
USING THE MONITOR SET
Connecting to a PC
RGB connection
NOTE
It is recommended to you use an HDMI
yy
connection for the best image quality.
Transmits an analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the D-sub 15 pin cable as shown the
following illustrations.
PC
CAUTION
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
RGB IN
RGB IN
NOTE
Apple computers may
yy
require an adapter
to connect to this
monitor. Call or visit
their web site for more
information.
CAUTION
Do not press the screen with your finger for
yy
this damage the screen.
Avoid displaying a fixed image on the
yy
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
USING THE MONITOR SET
21
HDMI connection
Transmits the digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the DVI to DVI cable as shown the
following illustrations.
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations. When using computer
input with HDMI, you must set the label of that
HDMI input to PC.
PC
ENG
ENGLISH
DVI to DVI connection
PC
(not included)
REMOTE
CONTROL IN
DVI IN
AUDIO
(RGB/DVI)
/DVI
CO
DVI IN
NOTE
If you do not use an optional external
yy
speaker, connect the PC to the Monitor set
with audio cable.
Use a shielded signal interface cable, such
yy
as D-sub 15 pin signal cable and DVI to
HDMI cable, with a ferrite core to maintain
standard compliance for the product.
If you want to use HDMI-PC mode, you must
yy
set the input label to PC mode.
/DVI
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode.
If you want to use HDMI-PC mode, you must
yy
set the input label to PC mode.
22
USING THE MONITOR SET
ENGLISH
ENG
Audio connection
IR Receiver connection
Transmits the audio signals from your PC to the
Monitor set. Connect the PC and the Monitor set
with the Audio cable as shown in the following
illustrations. You should set PC as an input label
to connect the PC to the Monitor set with an Audio
connection.
Allows the use of a wired remote or IR receiver
extension.
PC
(not included)
REMOTE
CONTROL IN
DVI IN
/DVI
AUDIO
(RGB/DVI)
DVI IN
/DVI
USING THE MONITOR SET
Customizing image options
Selecting an image mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images using optimized settings by
selecting one of the preset image modes.
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
Mode
Vivid
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Description
Adjusts the video image for the retail
environment by enhancing the Contrast,
Brightness, Color, and Sharpness.
Standard
Adjusts the image for the normal
environment.
Cinema
Optimizes the video image for the
cinematic look and enjoy movies as if you
are in a movie theater.
Sports
Optimizes the video image for high and
dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
2 Press the Navigation buttons to scroll to
Optimizes the video image for a fast
gaming screen such as PCs or games.
Option
Backlight
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright part of the
image is saturated.
Brightness
Adjusts the base level of the signal in
the image. You may use Brightness
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Description
Adjusts the brightness of the screen
when the dark part of the image is
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts intensity of all Colors.
Tint
Adjusts the balance between Red
and Green levels.
Color
Set to warm to enhance hotter Colors
Temperature
such as red, or set to cool to make
picture bluish.
ENG
ENGLISH
Adjusting the screen
23
24
USING THE MONITOR SET
ENGLISH
ENG
Advanced
Customizes the advanced options.
Control
See more information about advanced
options See p.43.
Picture
Restores the options to the default
Reset
setting.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Adjusting the sound
Selecting an sound mode
Play the sound in its optimized settings by
selecting one of the preset sound modes.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
AUDIO and press OK.
3 Press the Navigation buttons to scroll to Sound
Mode and press OK.
Customizing PC display options
Customize options of each image mode for the
best image quality.
This function works in the following mode:
yy
RGB[PC] mode.
4 Press the Navigation buttons to scroll to a
sound mode you want and press OK.
Mode
Standard
Description
Selects when you want standard-quality
sound.
1 Press MENU to access the main menus.
Music
Selects when you listen to music.
2 Press the Navigation buttons to scroll to
Cinema
Selects when you watch movies.
Sports
Selects when you watch sports events.
Game
Selects when you play games.
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Screen and press OK.
4 Select and adjust following options, and then
press OK.
Option
Description
Resolution
Selects a proper Resolution.
Auto
Sets to adjust the screen Position, Size
Configure
and Phase automatically. The displayed
image may be unstable for a few seconds
while the configuration is in progress.
Position/
Adjusts the options when the image is
Size/Phase not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
USING THE MONITOR SET
25
Using additional options
Customize options of each sound mode for the
best sound quality.
Adjusting aspect ratio
1 Press MENU to access the main menus.
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
Monitor set.
2 Press the Navigation buttons to scroll to
AUDIO and press OK.
3 Press the Navigation buttons to scroll to Sound
Mode and press OK.
CAUTION
4 Press the Navigation buttons to scroll to a
sound mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Description
Infinite
LG's Infinity Sound option provides
Sound
5.1 channel stereo sound from two
If a fixed image displays on the screen for a
yy
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
yy
period of time, image burn may occur on
the letterboxed area of the screen.
speakers.
Treble
Controls the dominant sounds in the
output. When you turn up the treble, it
will increase the output to the higher
frequency range.
Bass
Controls the softer sounds in the
output. When you turn up the bass, it
will increase the output to the lower
frequency range.
Reset
Resets the sound mode to the default
setting.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
You can also change the image size by
accessing the main menus.
ENG
ENGLISH
Customizing sound options
26
USING THE MONITOR SET
ENGLISH
ENG
- 16:9: The following selection will allow you
to adjust the picture horizontally, in linear
proportion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs).
- Zoom: The following selection will allow you to
view the picture without any alteration, while
filling the entire screen. However, the top and
bottom of the picture will be cropped.
- Just Scan: Following Selection will lead to you
view the picture of best quality without loss of
original picture in high resolution image.
Note: If there is noise in original Picture, You
can see the noise at the edge.
- Cinema Zoom1: Choose Cinema Zoom when
you want to enlarge the picture in correct
proportion.
Note: When enlarging or reducing the picture,
the image may become distorted.
Just Scan
yy< or > button: Adjust enlarge proportion of
- 4:3: The following selection will allow you to view
a picture with an original 4:3 aspect ratio, gray
bars will appear on both the left and right of the
screen.
Cinema Zoom. The adjustment range is 1 to
16.
yy or button: Move the screen.
NOTE
You can only select 16:9, Just Scan, 4:3,
yy
Zoom, Cinema Zoom1 in Component and
HDMI mode.
You can only select 4:3, 16:9 in RGB-PC,
yy
HDMI-PC mode only.
In HDMI/DVI-DTV, Component (over 720p)
yy
mode, Just Scan is available.
ENTERTAINMENT
27
Connecting to a wired network
(Depending on model)
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustration and set up the network settings.
47WV30BS only supports wired network connection.
After making a physical connection, a small
number of networks may require the display network settings to be adjusted. For most networks,
the display will connect to automatically without
any adjustments.
For detailed information, contact your internet
provider or router manual.
LAN
Router
@
Internet
Internet
LAN
WAN
To set up the network seetings: (Even if your display has already connected automatically, running
setup again will not harm anything),
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Setting and press OK.
4 If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
-If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses will need to be input manually.
-IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
ETHERNET
Cable modem
CAUTION
yy
Do not connect a modular phone cable to
the LAN port.
yy
Since there are various connection methods, please follow the specifications of
your telecommunication carrier or internet
service provider.
CAUTION
yy
Network setting menu will not be available until the display connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of
your telecommunication carrier or internet
service provider.
ENG
ENGLISH
ENTERTAINMENT
28
ENTERTAINMENT
NOTE
ENGLISH
ENG
yy
If you want to access the Internet directly
on your display, the internet connection
should always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check
the LAN cable or check if DHCP in the
router is turned on.
yy
If you do not complete the network settings, the network may not work properly.
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices you
can connect at the same time. (If your ISP limits
sub-scription to one device, this display may
not be allowed to connect when a PC is already
connected.)
yy
The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Tips for Network setting
yy
Use a standard LAN cable with this display. Cat5
or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
network, quickly power off and/or disconnect the
power cable of the network router or cable modem. Then power on and/or connect the power
cable again.
yy
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable
terms of service. For details, contact your ISP.
yy
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow for
such a connection, you will not be able to connect the display.
Network Status
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after setting the network.
Return to the previous menu.
ENTERTAINMENT
Connect USB storage devices such as a USB
flash memory, external hard drive to the display
and use multimedia features (See "Browsing files"
on page 30).
Connect a USB flash memory or USB memory
card reader to the Display as shown on the following illustration. The My media screen appears.
or
CAUTION
yy
Do not turn the display off or remove
a USB storage device while EMF(my
media) Menu is activated, as this could
result in loss of files or damage to the
USB storage device.
yy
Back up your files saved on a USB storage device frequently, as you may lose
or damage the files and this may be not
covered by the warranty.
Tips for using USB storage devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition program may not be recognized.
yy
A USB storage device which uses its own
driver may not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
yy
Please use only a USB storage device which
was formatted as a FAT32 file system or
NTFS file system provided with the Windows operating system. In case of a storage
device formatted as a different utility program
which is not supported by Windows, it may
not be recognized.
yy
Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable provided by the device maker.
yy
Some USB storage devices may not be supported or operated smoothly.
yy
File alignment method of USB storage
device is similar to Window XP and filename
support of up to 100 English characters.
yy
Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
ENG
ENGLISH
Connecting USB storage devices
29
30
ENTERTAINMENT
ENGLISH
ENG
yy
If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
yy
If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
yy
If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yy
If the USB memory device does not work
properly, disconnect and reconnect it.
yy
How fast a USB memory device is detected
differs from device to device.
yy
If the USB is connected in Standby Mode,
specific hard disk will automatically be
loaded when the display is turned on.
yy
The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
yy
Any device with more than the recommended
capacity may not work properly.
yy
If a USB external hard disk with a “Energy
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy
Maximum of 999 folders or files can be recognized under one folder.
Browsing files
Access the photo, music, or movie lists and browse
files.
1 Connect a USB storage device.
2 Press MENU to access the main menus.
3 Press the Navigation buttons to scroll to My
Media and press OK.
4 Press Navigation buttons to scroll to PHOTO
LIST, MUSIC LIST, or MOVIE LIST and press
OK.
Movie List
Photo List
Music List
2
1
Page 1/1
Photo List
USB External
001
002
010
011
Drive1
Page 1/1
003
004
005
006
012
013
014
015
Move
To Music List
Change Numbers
007
View
008
009
PAGE
Page Change
Mark Mode
4
5
Exit
3
No.
Description
1
Moves to upper level folder
2
Current page/Total pages
Corresponding buttons on the
remote control
Current page/ total pages of
contents under the folder
4
focused on 1
Contents under the folder
5
focused on 1
Buttom
Description
Repeatedly, press the GREEN button to
Green converted to Photo List->Music List,
button Music List->Movie List or Movie List>Photo List.
Yellow A method to view in 5 large thumbnail
button or simple list.
Blue
Convert to Mark Mode.
button
3
ENTERTAINMENT
Supported file format
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,
TS,TRP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.
vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.
wmv/*.flv/*.avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file
Video format : DivX3.11, DivX4.12,
DivX5.x, DivX6, Xvid1.00, Xvid1.01,
Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg,
MP3, LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
Photo
MP3
Bit rate 32 to 320
yy Sampling rate MPEG1 Layer3 : 32 kHz,
44.1 kHz, 48 kHz
yy Sampling rate MPEG2 Layer3 : 16 kHz,
22.05 kHz, 24 kHz
yy Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
Viewing movies
This display will play media files from a USB drive
or a DLNA server on your network.
1 Press the Navigation buttons to scroll to My
Media and press OK.
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
2 Press the Navigation buttons to scroll to Movie
Internal Subtitle format : only, XSUB (It is
the subtitle format used in DivX6 files)
JPEG
3 Press the Navigation buttons to scroll to a
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
yy You can play JPEG files only.
yy Non-supported files are displayed in the
form of predefined icon.
Only 3D Models
4 Press the Navigation buttons to scroll to a file
File
Item
Extensions
2D jpeg
jpg
jpe
Profile
supported yy SOF0:
file format
baseline
yy SOF1:
Extend
Sequential
yy SOF2:
Progressive
photo size yy Min: 64 X 64
yy Max-Normal
Type: 15360
(W) X 8640 (H)
yy Progressive
Type: 1920
(W) X 1440 (H)
3D mpo
supported mpo
file format
photo size yy 4:3 size:
3,648 x 2,736
2,592 x 1,944
2,048 x 1,536
yy 3:2 size:
3,648 x 2,432
List and press OK.
folder you want and press OK.
you want and press OK.
ENG
ENGLISH
Type
Movie
Music
31
32
ENTERTAINMENT
6 Control playback by using the following buttons.
Page 1/1
Movie List
ENGLISH
ENG
Drive1
USB External
001
002
005
006
Page 1/1
003
004
►
Move
Change Numbers
To Photo list
View
Page Change
■
◄►
►
II
◄◄
01:02:30 / 02:30:25
►►
Q.MENU
Option
Hide
Exit
Exit
Mark Mode
Page 1/1
Movie List
Mark Mode
Drive1
USB External
001
002
005
Page 1/1
003
004
051. Apple_ ......
02:30:25
006
Move
Play Marked
PAGE
Mark All
Menu
Play Marked
Unmark All
View
Exit Mark Mode
PAGE
Page Change
Exit
Description
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Mark All
Mark all movie files on the screen.
Unmark All
Deselect all marked movie files.
Exit Mark Mode Exit the Mark Mode.
Button
r
Description
Stops the playback
s
Plays a video
t
Pauses or resumes the playback
v
Scans backward in a file
w
MENU
Scans forward in a file
BACK
Hide the menu on the full-sized screen.
EXIT
NOTE
yy
Non-supported files are displayed the preview
image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
Return to Movie List.
Skips to specific points in a file during playback. The time of a specific
< or >
point will appear on the status bar. In
some files, this function may not work
ENERGY
SAVING
AV MODE
5 Play a movie.
Show the Option menu.
properly.
Press the ENERGY SAVING button
repeatedly to increase the brightness
of your screen.
Press the AV MODE button repeatedly
to select the desired source.
ENTERTAINMENT
Tips for using playing video files
When you are watching the movie by Movie
yy
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Video options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
yy
When replaying the video file after stopping,
you can play from where it stopped previously.
ENG
ENGLISH
yy
Some user-created subtitles may not work
properly.
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
Movie files produced with some encoders
may not be played correctly.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
HD videos with a maximum of
1920x1080@25/30P or 1280x720@50/60P
are supported, depending on the frame.
yy
Videos with resolutions higher than
1920X1080@25/30P or 1280x720@50/60P
may not work properly depending on the
frame.
yy
Movie files other than the specified types and
formats may not work properly.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yy
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
not supported for playback.
yy
A DivX movie file and its subtitle file must be
located in the same folder.
yy
A video file name and its subtitle file name
must be identical for it to be displayed.
yy
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
yy
Files encoded with GMC(Global Motion
Compensation) may not be played.
33
34
MAINTENANCE
When you select the Set Video Play,,
Repeat
Turn on/off repeat function of
ENGLISH
ENG
movie playback. When turned on, the
1 Press the Navigation buttons to scroll to show
file within the folder will be played
the Picture Size, Audio Language, Subtitle
Language or Repeat.
back repeatedly. Even when the
repeated playback
2 Press the Navigation buttons to scroll to make
is turned off, it can run the playback if
appropriate adjustments.
the file name is similar to the previous
file.
Menu
Picture Size
Description
Selects your desired picture
Audio
format during movie play.
Changes the Language Group of the
Language
audio during movie play. Files
Dutch, Portuguese, Danish, Roma-
with a single audio track cannot be
nian, Norwegian, Albanian, Gaelic,
selected.
Subtitle Lan-
Turn on/off the subtitle.
Code Page
Latin1
German, Italian, Swedish, Finnish,
Welsh, Irish, Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Latin2
Slovak, Slovenian, Serbian,
guage
Language
subtitle.
Code Page
Hungarian
Activated for SMI subtitle and
can select the language within the
Can select the font for subtitle.
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
When set to default, same font as
general menu will be used.
Sync
Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs
Support Language
English, Spanish, French,
Greek
Greek
Turkish
Turkish
by steps of 0.5 secs during movie
play.
Position
Changes the position of the
subtitle either up or down during
movie play.
Size
Selects your desired Subtitle size
during movie play.
NOTE
yy
Only 10,000 of sync blocks can be supported
within the subtitle file.
yy
When playing a video, you can adjust the
Picture Size by pressing the RATIO button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
MAINTENANCE
When you select the Set Video,,
appropriate adjustments.
Page 1/1
Photo List
USB External
001
Drive1
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
When you select the Set Audio,,
Move
Change Numbers
To Music List
View
008
009
PAGE
Page Change
Exit
Mark Mode
1 Press the Navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
007
Page 1/1
Photo List
Mark Mode
USB External
Drive1
Page 1/1
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
011
003
004
005
006
012
013
014
015
Viewing photos
Move
View Marked
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
1 Press the Navigation buttons to scroll to My
Media and press OK.
2 Press the Navigation buttons to scroll to Photo
List and press OK.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
Mark All
Menu
Unmark All
007
View
008
009
PAGE
Page Change
Exit Mark Mode
Exit
Description
View Marked
Display the selected photo file.
Mark All
Mark all photo files on the screen.
Unmark All
Deselect all marked photo files.
Exit Mark Mode Exit the Mark Mode.
5 View photos.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
NOTE
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
ENG
ENGLISH
1 Press the Navigation buttons to scroll to make
35
36
MAINTENANCE
Using photo options
Press the ENERGY SAVING button
repeatedly to change the brightness of
your screen.
Option
yy Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
yy BGM: Selects a music folder for the
background music.
Use the following options while viewing photos.
01_a.jpg
2008/12/10
1920 x 1080
479 KB
NOTE
◄
◄
ENGLISH
ENG
ENERGY
SAVING
◄
Slideshow
►
BGM
Options
■
yyYou cannot change the music
folder while the background
music is playing.
yyYou can only select the MP3
folder saved on the device that
currently displays the photo.
►
2/13
Q.MENU
Option
Hide
Exit
Number of selected photos
Hide
EXIT
Option
Slideshow
BGM
(Rotate)
Description
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos saved in the current folder display
during a slideshow.
To set a slideshow speed, select Option.
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust Option by MENU button
on the remote control.
Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
View the photo by zoom in 2, 4 times.
Hides the option window.
To display the options, press OK.
Return to Photo List.
Photo options
1 Press MENU to show the Option menus.
2 Press the Navigation buttons to scroll to Set
Photo View., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
MAINTENANCE
When you select the Set Photo View,
37
Listening to music
Slide Speed or BGM..
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
1 Press the Navigation buttons to scroll to My Media and press OK.
2 Press the Navigation buttons to scroll to Music
List and press OK.
3 Press the Navigation buttons to scroll to a folder
you want and press OK.
When you select the Set Video,
1 Press the Navigation buttons to scroll to make
appropriate adjustments.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
USB External
Drive1
001. - B01.mp3
00:00
1 Press the Navigation buttons to scroll to show
Move
To Movie List
the Sound Mode, Clear Voice II or Balance.
appropriate adjustments.
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
When you select the Set Audio,
2 Press the Navigation buttons to scroll to make
Page 1/1
002. -B02.mp3
00:00
View
Change Numbers
PAGE
Page Change
Exit
Mark Mode
Page 1/1
Music List
Mark Mode
USB External
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play Marked
Menu
Play Marked
Mark All
Unmark All
Mark All
View
Unmark All
Page Change
Exit
Description
Display the selected music file.
Mark all music files on the screen.
Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
PAGE
Exit Mark Mode
ENG
ENGLISH
1 Press the Navigation buttons to scroll to select
38
MAINTENANCE
6 Control playback by using the following buttons.
ENGLISH
ENG
This unit cannot support the ID3 Tag
yy
embedded MP3 files.
Page 1/1
Music List
3 file(s) Marked
Drive1
Page 1/1
►
004. - B04.mp3
00:00
005. - B05.mp3
00:00
005. - B05.mp3
■
►
II
◄◄
Button
►►
►
006. - B06.mp3
00:00
007. - B07.mp3
00:00
◄►
Q.MENU
Option
s
Plays a music file
t
Pauses or resumes playback
w
Skips to the next file
v
Skips to the previous file
MENU
Hide
EXIT
< or >
Hide
Exit
Description
Stops playback
Green
button
ENERGY
SAVING
NOTE
008. - B08.mp3
00:00
02:30 / 03:25
Play with Photo
r
v or w
Tips for playing music files
When playing,
When you press the v button, the previous music file will be played.
When you press the w button, the next
music file will be played.
Start playing the selected music files and
then move to the Photo List.
Press the ENERGY SAVING button repeatedly to change the brightness of
your screen.
Show the Option menu.
Hides the option window.
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
yy
Non-supported files are displayed the preview image by icon only .
yy
Abnormal files are displayed in the form of
bitmap .
yy
A damaged or corrupted music does not play
but displays 00:00 in playtime.
yy
A music downloaded from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
yy
If you press OK, r buttons, screen saver
is stopped.
yy
The PLAY(s), Pause(t), r , w, v
buttons on the remote control are also available in this mode.
yy
You can use the w button to select the next
music and the v button to select the previous music.
file name
002. B02.mp3
► 00:31 / 04:04
Time elapsed /Duration
MAINTENANCE
Music options
2 Press the Navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
DivX® VOD Guide
DivX® VOD Registration
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
3 Press the Blue button.
4 Press the Navigation buttons to scroll to DivX
Reg. Code and press OK.
5 View the registration code of your display.
When you select the Set Audio Play.,
1 Press the Navigation buttons to scroll to select
the Repeat or Random.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
When you select the Set Audio,,
Close
1 Press the Navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
NOTE
yy
Movie files are supported as follows
Resolution : under 1920x1080 WxH pixels
Frame rate : under 30 frames/
sec(1920x1080), under 60 frames/
sec(under 1280x720)
yy
Video Codec : MPEG 1, MPEG 2, MPEG
4, H.264/AVC, DivX 3.11, DivX 4.12,
DivX 5.x, DivX 6, Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1,
Xvid 1.10-beta2, JPEG, VC1, Sorenson
H.263/H.264.
ENG
ENGLISH
1 Press MENU to access the Pop-Up menus.
39
40
MAINTENANCE
DivX® VOD Deregistration
ENGLISH
ENG
You should deregister your device with 8 digit DivX
deregistration code from your device at www.divx.
com/vod.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
3 Press the Blue button.
4 Press the Navigation buttons to scroll to Deactivation and press OK.
5 Press the Navigation buttons to select Yes to
confirm.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
Once the deregistration is executed, you
yy
must register your device again to see
DivX® VOD contents.
CUSTOMIZING SETTINGS
ENG
ENGLISH
CUSTOMIZING SETTINGS
Accessing main menus
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to one of the following menus and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.42)
Adjusts the image size,
quality, or effect
PICTURE
OPTION
AUDIO (See p.44)
Adjusts the sound quality,
effect, or volume level
AUDIO
NETWORK
OPTION (See p.46)
Customizes the general settings
NETWORK (See p.48)
Sets up the network
setting.
41
TIME (See p.45)
Sets the time, date or
Timer feature
TIME
MY MEDIA
MY MEDIA
(See p.29)
Display and play
movie, photo and
music content
stored on your USB
42
CUSTOMIZING SETTINGS
PICTURE settings
PICTURE
ENGLISH
ENG
• Aspect Ratio 1 Press MENU to access the main menus.
•
Move
OK
: 16:9
ꔋ
Energy Saving : Off
• Picture Mode : Standard
• Backlight 50
• Contrast 50
• Brightness 50
• Sharpness 50
option you want and press OK.
• Color 50
-To return to the previous level, press BACK.
• Tint 0
R
G
• Color Temp. 0
W
C
• Advanced Control
• Picture Reset
2 Press the Navigation buttons to scroll to PICTURE and
press OK.
3 Press the Navigation buttons to scroll to the setting or
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
• Screen
The available picture settings are described in the following:
Setting
Aspect Ratio
Description
Changes the image size to view images at its optimal size (See p.25).
Energy Saving Sets to automatically adjust the screen brightness corresponding to the surroundings.
Option
Picture Mode
Off
The backlight is off.
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen off
The screen turns off in 3 seconds.
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
SCREEN
(In RGB-PC
Mode Only)
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
This option is enabled only when Input Select is set to Analog (RGB-PC) and the resolution is set to
1024x768, 1280x768, 1360x768 or 1366x768 on your PC.
Option
Resolution
Selects a proper resolution. See "Specification" See p.55 for the recommended
resolution for each model.
Auto Configure
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
CUSTOMIZING SETTINGS
43
Basic image options
Description
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark
part of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all Colors.
Tint
Adjusts the balance between red and green levels.
Color Temperature
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options.
Picture Reset
Restores the options to the default setting.
Advanced image options
Setting
Description
Dynamic Contrast
(Off/Low/Medium/
High)
Optimizes the contrast automatically according to the brightness of the reflection.
(This function can be used only under Component.)
Dynamic Color
(Off/Low/High)
Adjusts the Color of the reflection automatically to reproduce natural colurs as close as
possible.(This function can be used only under Component.)
Clear White
(Off/Low/High)
Make the white area of screen brighter and more white.
Skin Color
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
Removing the noise up to the point where it does not damage the original picture. (This
(Off/Low/Medium/High) function can be used only under Component.)
Digital Noise
This option reduces the noise produced while creating digital video signals.
Reduction
(Off/Low/Medium/High)
Gamma
(Low/Medium/High)
Set your own gamma value.
On the monitor, high gamma values display whitish images and low gamma values display
high contrast images.
Black Level
Low/High
yyLow: The reflection of the screen gets darker.
yyHigh: The reflection of the screen gets brighter.
Function works in the following mode - Component, HDMI, DVI-D adjusts the contrast and the
brightness of the screen using the black level of the screen.
ENG
ENGLISH
Setting
Backlight
44
CUSTOMIZING SETTINGS
AUDIO settings
AUDIO
ENGLISH
ENG
• Clear Voice II 1 Press MENU to access the main menus.
Move
• Balance 2 Press the Navigation buttons to scroll to AUDIO and press
OK.
3 Press the Navigation buttons to scroll to the setting or
OK
: Off
ꔋ
0
L
• Sound Mode : Standard
• Infinite Sound: Off
• Treble 50
• Bass 50
• Speaker : On
R
• Reset
option you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others, it helps users listen to human voices better.
Balance
Use this function to balance sound from the left and right speakers.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
The most commanding and natural audio.
Music
Select this option to enjoy the original sound when listening to
the music.
Cinema
Select this option to enjoy sublime sound.
Sports
Select this option to watch sports broadcasting.
Game
To enjoy dynamic sound when playing a game.
NOTE
If sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
Option
Speaker
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound
from two speakers.
Treble
Controls the dominant sounds in the output. When you turn up
the treble, it will increase the output to the higher frequency
range.
Bass
Controls the softer sounds in the output. When you turn up the
bass, it will increase the output to the lower frequency range.
Reset
Resets the sound mode to the default setting.
Turns on the internal speaker of the set when using an external Hi-Fi system. You can use the
speaker as an audio output device even if there is no video input.
CUSTOMIZING SETTINGS
TIME settings
TIME
Move
OK
ꔋ
• Off Time : Off
2 Press the Navigation buttons to scroll to TIME and press OK.
• On Time : Off
• Sleep Timer : Off
3 Press the Navigation buttons to scroll to the setting or option
• Power On Delay : Off
you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
If the current time is incorrect, reset the clock manually.
1) Press the MENU button and then use
button to select the TIME menu,input OK button
to enter.
2) Press the button and then use
button to select Clock menu.
3) Press the button and then use
button to select date
4) Press the
button and then use
button to set the hour(00h to 23h).
5) Press the
button and then use
button to set the minutes(00 min to 59 min).
On/Off Time
The off time automatically switches the set to standby at the pre-set time.
1) Press the MENU button and then use
button to select the TIME menu,input OK button
to enter.
2) Press the button and then use
button to select On/Off Timer.
3) Press the button and then use
button to select date
4) Press the
button and then use
button to set the hour(00h to 23h).
5) Press the
button and then use
button to set the minutes(00 min to 59 min).
6) Press the
button ,According to the personal needs, choose to add button.
Sleep Timer
The power is automatically turned off when the time set by a user is passed.
1) Press the MENU button and then use
button to select the TIME menu,input OK button
to enter
2) Press the button and then use
button to select Sleep Timer menu.
3) Press the
button and then use button to select the minutes(Off to 240 min).
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on
individually to prevent overload.
ENG
ENGLISH
• Clock
1 Press MENU to access the main menus.
45
46
CUSTOMIZING SETTINGS
OPTION settings
OPTION
Move
ENGLISH
ENG
• Menu Language
1 Press MENU to access the main menus.
• ISM Method 2 Press the Navigation buttons to scroll to OPTION and press
OK.
OK
ꔋ
: Normal
• Factory Reset
• Set ID
• Tile Mode
• FAN
3 Press the Navigation buttons to scroll to the setting or
• Product/Service Info.
option you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
The available option settings are described in the following:
Setting
Description
Menu Language
To choose the language in which the control names are displayed.
ISM Method
Leaving a fixed image on the screen for a long time may cause damage to the screen and cause
image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize
the residual image prevention function on the product, and when the product is not used, turn off
the power. Burn-in and related problems are not covered by the warranty on this product.
Setting
Normal
Sets it if image sticking is never a problem
White wash
Removes a ghost image on the screen.
Use sparingly. Watch the sets normally for a while before using this feature to
see if the ghost image disappears on its own.
Color wash
Removes a ghost image on the screen.
The color block with the screen moved a little and the white pattern are
alternately displayed. It is difficult to see the after image on all colors.
Once it has been corrected it will not be visible in any color.
Factory Reset
Select this option to return to the default factory settings.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to Total Set ID) using the button and exit. Use
the assigned Set ID to individually control each product using the Product Control Program.
NOTE
If you change SET ID No, the value of ‘Power On Delay’ will be set to (SET ID No)/3(sec)
to prevent power consumption overload.
ex) SET ID No = 31 → Power On Delay = 10(=31/3)
CUSTOMIZING SETTINGS
Setting
FAN
Description
Setting
Tile Mode
You can display the image on multiple sets and view it in a larger size. To use
the Tile Mode on multiple sets with same signal.
Auto Config.
This option optimizes the screen when you connect the set to a new computer
or change to a different mode. If you are not satisfied with the adjustment, you
can manually change the "Position" or "Size".
Position
You can set the position.
Size
You can set the size.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
Setting
Mode
This option indicates the monitor's internal temperature and controls the fan.
• Auto: Switches the fan on and off according to the set temperature.
• On: The fan is always switched on.
• Manual: Switches the fan on and off according to user settings.
Hysterisis
The difference in temperature between when the fan is switched on and when
it is off.
Set Temperature
Set the temperature at which the fan is switched on.
Current
Temperature
Current temperature inside the set.
NOTE
We recommend that you use the Auto mode to prevent any malfunctions resulting from
incorrect fan settings.
Product/Service
Info.
This option shows information about the set.
ENG
ENGLISH
Tile Mode
47
48
CUSTOMIZING SETTINGS
NETWORK settings
NETWORK
ENGLISH
ENG
• Network Setting
1 Press MENU to access the main menus.
• Network Status
Move
: Wired
: Not connected
2 Press the Navigation buttons to scroll to NETWORK and
press OK.
3 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Network Setting
Configure the network settings.(See p.27)
Network Status
Display the network status.(See p.28)
NOTE
yy
Network setting menu will not be available until the display connected to physical network.
OK
ꔋ
MAKING CONNECTIONS
49
Connect various external devices to the ports on the Monitor set’s back panel.
1 Find an external device you want to connect to your Monitor set shown in the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI - (See p.50)
Component - (See p.51)
DVD
HDMI - (See p.50)
Component - (See p.51)
Speaker
USB
Memory storage
- (See p.51)
Memory card reader
- (See p.51)
PC
HDMI - (See p.21)
DVI - (See p.21)
RGB - (See p.20)
Camcorder/Camera
Gaming device
HDMI - (See p.50)
Component - (See p.51)
HDMI - (See p.50)
Component - (See p.51)
NOTE
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.
ENG
ENGLISH
MAKING CONNECTIONS
50
MAKING CONNECTIONS
ENGLISH
ENG
Connecting to a HD receiver,
DVD or VCR player
Connect a HD receiver, DVD, or VCR player to the
Monitor set and select an appropriate input mode.
HDMI connection
DVI - HDMI connection
Transmits the digital video signal from an external
device to the Monitor set. Connect the external
device and the Monitor set with the DVI-HDMI
cable as shown in the following illustration. To
transmit an audio signal, connect an optional audio
cable.
Transmits the digital video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the HDMI
cable as shown on the following illustration.
PC
PC
(not included)
(not included)
(not included)
/DVI
/DVI
/DVI
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
Dolby Digital is not supported.
yy
CAUTION
When connecting
yy
an HDMI cable as
illustrated, remove
the screw on the
HDMI connector first.
/DVI
AUDIO
(RGB/DVI)
AUDIO
(RGB/DVI)
MAKING CONNECTIONS
Connecting to the LAN
AV connection
LAN connection
Connect the LAN cable.
A Using a router(Switching Hub)
PC
LAN
Switching Hub
Product
PC
(not included)
B Using the Internet.
AUDIO
(RGB/DVI)
Connecting to a USB
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor set and
access the USB menu to use various multimedia
files. "Connecting USB storage devices" on See
p.29 and “Browsing files” on See p.30
or
ENG
ENGLISH
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect
the external device and the Monitor set with a
component video cable and composite audio cable
as shown on the following illustration.
(not included)
51
Network
52
MAKING CONNECTIONS
Daisy Chain Monitors
ENGLISH
ENG
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
• To use different products connected to each other Connect one end of the signal input cable (15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products
RGB Cable
15-pin D-Sub Signal Cable
(Max 3m)
DVI Cable
DVI Cable
(Max 3m)
DVI-OUT
DVI-OUT
DVI-IN
DVI-IN
DVI-OUT
DVI-OUT
DVI-IN
DVI-IN
DVI-OUT
DVI-IN
DVI-OUT
DVI-IN
NOTE
When multi-connecting in/out cascade format, no loss cables are recommended.
yy
Since the image quality may decrease when multiple monitors are connected, an amplifier may be
yy
required in certain instances.
TROUBLESHOOTING
53
ENG
ENGLISH
TROUBLESHOOTING
General
No image is displayed
Problem
Resolution
Is the product power cord
connected?
yy See if the power cord is properly connected to the outlet.
oes the 'Invalid Format' message
D
appear?
yy The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1366 x 768 @ 60 Hz
HDMI/DVI : 1366 x 768 @ 60 Hz
yy The signal cable between PC and product is not connected. Check
the signal cable.
yy Press the 'INPUT' menu in the remote Control to check the input
signal.
oes the 'No Signal' message
D
appear?
NOTE
Vertical frequency: To enable the user to watch the product display, screen image should be changed
yy
tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times
of image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided
yy
by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as
the horizontal frequency. The unit is kHz.
54
TROUBLESHOOTING
The screen image looks abnormal.
Problem
Resolution
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
yy See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
yy D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the size OSD
menu.
Horizontal noise appears or the
yy D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
The screen is displayed abnormally. yy The proper input signal is not connected to the signal port. Connect
the signal cable that matches with the source input signal.
Is the screen position wrong?
ENGLISH
ENG
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
The audio function does not work.
Problem
Resolution
Sound is too dull.
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Select the appropriate equalize sound.
Sound is too low.
yy Adjust the volume.
No sound?
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution
(16 colors).
yy Set the number of colors to more than 24 bits (true color) Select
Control Panel - Display - Settings - Color Table menu in Windows.
creen color is unstable or monoS
colored.
yy Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
yy Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
SPECIFICATIONS
55
LCD Panel
Video Signal
Screen Type
1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1192.8 mm
Pixel Pitch
0.5415 mm (H) x 0.5415 mm (V)
Max. Resolution
RGB : 1366 x 768 @ 60 Hz
HDMI/DVI : 1366 x 768 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution
RGB : 1366 x 768 @ 60 Hz
HDMI/DVI : 1366 x 768 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
RGB : 30 kHz to 68 kHz
HDMI/DVI : 30kHz to 68 kHz
Vertical Frequency
RGB : 56 Hz to 75 Hz
HDMI/DVI : 56 Hz to 63 Hz
Synchronization Type
Separate Sync, Composite Sync, Digital, SOG
Input Connector
Power
15-pin D-Sub type, HDMI/DVI(digital), COMPONENT, RS-232C,
LAN, USB
Rated Voltage
AC 100-240 V~ 50 / 60 Hz 2.2 A
Power Consumption
On Mode : 220 W Max.
Off Mode : ≤ 0.5 W
Dimensions
(Width x Height x
Depth) / Weight
* Wall Bracket available VESA
800 x 400
H
W
D
1047 mm x 592 mm x 91.1 mm / 29 kg
Environmental
conditions
Operating Temperature
Operating Humidity
5 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
* Applicable only for models that support the speakers
Audio
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
ENG
ENGLISH
SPECIFICATIONS
56
SPECIFICATIONS
PC supported mode
ENGLISH
ENG
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Resolution
1
720 x 400
31.468
70.8
*2
640 x 480
31.469
59.94
*3
800 x 600
37.879
60.317
4
832 x 624
49.725
74.55
*5
1024 x 768
48.363
60
*6
1280 x 720
44.772
59.855
*7
1360 x 768
47.72
59.799
*8
1366 x 768
47.71
59.79
*9
1280 x 1024
63.981
60.02
1 to 9: RGB Mode
* : HDMI/DVI mode
DTV Mode
Resolution
Component
HDMI/DTV
480i
o
x
576i
o
x
480p
o
o
576p
o
o
720p
o
o
1080i
o
o
RS-232 CONTROL
You can control several products at a time by connecting them to a single PC.
yy
In the Option menu, Set ID must be between 1 and 225 without being duplicated.
yy
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC. This monitor features
two RS-232 ports. One input and one output. This allows you to daisy-chain monitors without having
to use a splitter box.
RS-232C Cable
PC
Set 1
NOTE
Set 3
Set 4
Use RS-232C cables as shown in the picture.
yy
If a cable bigger than the ones shown in the picture is used
yy
in the connector, the connection may not be flawless due to
interference between the cables.
Pin 1 of RS-232C Out should be connected with Pin 4 of RSyy
232C In.
15 mm or
less
RS-232C Configurations
8-Wire Configurations (Cross-over RS-232C cable)
PC
DCD
RXD
TXD
GND
DTR
DSR
RTS
CTS
Set 2
1
2
3
5
4
6
7
8
D-Sub 9
(Female)
Set
1
3
2
5
6
4
8
7
DCD
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
yy
Data Length : 8 bit
yy
Parity Bit : None
yy
Stop Bit : 1bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
ENG
ENGLISH
RS-232 CONTROL
57
58
RS-232 CONTROL
Command Reference List
ENGLISH
ENG
COMMAND
DATA
1
2
01. Power
k
a
00 to 01
02. Input Select
x
b
refer to 02. Input Select
03. Aspect Ratio
k
c
refer to 03. Aspect Ratio
04. Volume Mute
k
e
00 to 01
05. Volume Control
k
f
00 to 64
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Color
k
i
00 to 64
09. Tint
k
j
00 to 64
10. Sharpness
k
k
00 to 64
11. OSD Select
k
l
00 to 01
12. Treble
k
r
00 to 64
13. Bass
k
s
00 to 64
14. Balance
k
t
00 to 64
15. Color Temperature
x
u
00 to 64
16. ISM mode
j
p
refer to 16. ISM Method
17. Energy Saving
j
q
refer to 17. Energy Saving
18. Auto Configuration
j
u
01
19. Key
m
c
refer to 19. Key
20. Tile Mode
d
d
00 to 01
21. Tile H Position
d
e
00 to 64
22. Tile V Position
d
f
00 to 64
23. Tile H Size
d
g
00 to 64
24. Natural Mode
(in Tile Mode)
d
j
00 to 01
25. Picture mode
d
x
00 to 04
26. Sound mode
d
y
01 to 05
27. Elapsed Time Return
d
l
FF
28. Speaker
d
v
00 to 01
29. Sleep Time
f
f
00 to 08
30. Power On Delay
f
h
00 to 64
31. Language
f
i
00 to 08
32. Reset
f
k
00 to 02
33. H Position
f
q
00 to 64
34. V Position
f
r
23 to 41
35. H Size
f
s
00 to 64
36. FAN Control
d
o
00 to 01
37. FAN Fault check
d
w
FF
38. Temperature Value
d
n
FF
RS-232 CONTROL
59
Transmission / Receiving Protocol
DATA
2
39. Serial No. Check
f
y
FF
40. S/W Version
f
z
FF
41. Tile Matrix
d
k
11 to FF
42. Tile ID
d
i
Refer to 42. Tile ID
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1]: First command to control the set.
yy
[Command 2]: Second Command to control the set.
yy
[Set ID]: S
et ID wants to communicate with the set. Command for test is 00.
yy
[DATA]: Information passed to the set.
yy
[Cr]: Carriage Return. ASCII code ‘0x0D’.
yy
[ ]: ASCII code space ‘0 x 20’.
yy
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data
yy
feedback presents status about each function.
Note: In this mode, display will send the acknowledgement after power on processing completion.
yy
There might be a time delay between command and acknowledgement.
Refer to ‘Real data mapping’ for hexadecimal data to decimal data.
yy
No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to
yy
‘00’(=0x00).
ENG
ENGLISH
COMMAND
1
60
RS-232 CONTROL
Transmission / Receiving Protocol
ENGLISH
ENG
01. Power (Command : k a)
To control Power On / Off of the display.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
04. Volume Mute (Command : k e)
To select screen mute on/off.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
0 : Volume Mute On (Volume Off)
1 : Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’
data based on this format, Acknowledgement data
feedback presents status about each function.
* Note: In this modes, display will send the
acknowledgement after power on processing
completion. There might be a time delay between
command and acknowledgement.
* Refer to ‘Real data mapping’ for hexadecimal data
to decimal data.
02. Input Select (Command : x b)
To select input source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
40: Component
60: RGB PC
90: HDMI
91: DVI
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control(Command : k f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
* Refer to ‘Real data mapping’ for hex decimal value.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
* Use this feature depending on your model
03. Aspect Ratio (Command : k c)
To adjust the screen format.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
01: 4:3
02: 16:9
04: Zoom
09: Just scan(720p or more)
10 to 1F: Cinema Zoom 1 to 16
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
RS-232 CONTROL
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Color (Command: k i)
To adjust screen color.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
To adjust screen tint.
You can also adjust contrast in the PICTURE menu.
You can also adjust tint on AV and Component input
source.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint 0 to 100 (R50 to G50)
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust contrast in the PICTURE menu.
You can also adjust tint on AV and Component input
source.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
To select OSD(On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
01: OSD on
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
12. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the Audio menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
13. Bass (Command: k s)
To adjust bass.
You can also adjust treble in the Audio menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Bass 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
14. Balance (Command: k t)
To adjust balance.
You can also adjust treble in the Audio menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
07. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust contrast in the PICTURE menu.
61
62
RS-232 CONTROL
ENGLISH
ENG
15. Color Temperature (Command: x u)
To adjust color temperature.
You can also adjust color temperature in the Picture
menu.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
16. ISM Method (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 04: White Wash
08. Normal
20: Color Wash
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
17. Energy Saving (Command: j q)
To control the energy saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03. Maximum
05. Screen Off
19. Key (Command: m c)
To send IR remote control code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
When display is in the standby mode, display will
turn on by Power button of remote control only.
20. Tile mode (Command: d d)
To select a tile mode.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
21. Tile H Position (Command: d e)
To set the Horizontal position.
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left Max to Right Max
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
18. Auto Configuration (Command: j u)
To adjust picture position and minimize image
shaking automatically.
Auto configuration only works in RGB-PC mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01: Set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
22. Tile V Position (Command: d f)
To set the Vertical Position.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 23 to 41: Bottom Max to Top Max
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
RS-232 CONTROL
23. Tile H Size (Command: d g)
To set the Horizontal size.
Data 00 to 64: Min to Max
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
27. Elapsed Time Return (Command: d l)
To read the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
24. Natural Mode (in Tile Mode) (Comman : d j)
To assign the Tile Natural mode for Tiling function.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
28. Speaker (Command: d v)
To select speaker on/off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
29. Sleep Time (Command: f f)
To set sleep time.
25. Picture Mode (Comman : d x)
To select the picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard(User)
02. Cinema
03. Sport
04: Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
26. Sound Mode (Comman : d y)
To select the sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sport
05. Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
30. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on(unit: second).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: 0 to 100sec.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
63
64
RS-232 CONTROL
31. Language (Command: f i)
To set language for OSD.
ENGLISH
ENG
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Korean
01: Chinese
02: Japanese
03: English
04: French
05: German
06: Italian
07: Portuguese
08: Spanish(EU)
09: Russian
34. V Position (Command: f r)
To set the Vertical position.
* This function only works in Tile Off mode.
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
Data 23 to 41: Bottom 15 to Top 15
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
35. H Size (Command: f s)
To set the Horizontal size.
* This function only works in Tile Off mode.
32. Reset (Command: f k)
To execute the Picture, Screen and Factory reset
function.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Size -50 to +50
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Picture Reset
01: Screen Reset
02: Factory Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
36. FAN Control (Command: d o)
To set Fan control on/off.
* This function only works in Tile Off mode.
33. H Position (Command: f q)
To set the Horizontal position.
* This function only works in Tile Off mode.
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
RS-232 CONTROL
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
40. S/W Version (Command: f z)
To read the software version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Abnormal State
01: Normal State
41. Tile Matrix (Command: d k)
To set tile row and colume
Transmission
[d][k][ ][Set ID][ ][Data][Cr]
38. Temperature Value (Command: d n)
To read the inside temperature of the display.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data 11 to FF: 1st byte - Tile Row value
2nd byte - Tile Column value
* If Data is 00, 01 or 10, those commands won’t work
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
42. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
39. Serial No. Check (Command: f y)
To read the serial numbers.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
Data 01 to E1: Tile ID 01 to 225**
FF: Read Tile ID
* Data should not be larger than (Tile Row) x (Tile
Column)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
* NG will be returned if Data is larger than (Tile Row)
x (Tile Column), except 0xFF.
ENG
ENGLISH
37. FAN Fault Check (Command: d w)
To set Fan control on/off.
* This function only works in Tile Off mode.
65
66
RS-232 CONTROL
ENGLISH
ENG
IR CODE (Hex)
Function
Remark
08
POWER
Remocon Botton
C4
MONITOR ON
Remocon Botton
C5
MONITOR OFF
Remocon Botton
95
Evergy Saving
Remocon Botton
0B
INPUT
Remocon Botton
10
Number 0
Remocon Botton
11
Number 1
Remocon Botton
12
Number 2
Remocon Botton
13
Number 3
Remocon Botton
14
Number 4
Remocon Botton
15
Number 5
Remocon Botton
16
Number 6
Remocon Botton
17
Number 7
Remocon Botton
18
Number 8
Remocon Botton
19
Number 9
Remocon Botton
02
VOL+
Remocon Botton
03
VOL-
Remocon Botton
E0
BRIGHTNESS ∧ (Page Up)
Remocon Botton
E1
BRIGHTNESS ∨ (Page Down)
Remocon Botton
79
ARC (MARK)
Remocon Botton
4D
PSM
Remocon Botton
09
MUTE
Remocon Botton
43
MENU
Remocon Botton
99
AUTO
Remocon Botton
40
∧
Remocon Botton
41
∨
Remocon Botton
06
>
Remocon Botton
07
<
Remocon Botton
44
OK
Remocon Botton
28
BACK
Remocon Botton
7B
TILE
Remocon Botton
5B
EXIT
Remocon Botton
72
ID ON(Red)
Remocon Botton
71
ID OFF(Green)
Remocon Botton
63
Yellow
Remocon Botton
61
Blue
Remocon Botton
B1
■
Remocon Botton
B0
►
Remocon Botton
BA
ll
Remocon Botton
8F
◄◄
Remocon Botton
8E
►►
Remocon Botton
LICENSE
67
A different license is supported depending on the model. Visit www.lg.com for more information on the
license.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete your
registration.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
ENG
ENGLISH
LICENSE
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
E N E RGY STA R i s a s et of p owe rsaving guidelines issued by the U.S.
Environmental Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc. has
determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
Temporary noise is normal when powering ON or
OFF this device.
Download PDF