LG | 47WV50BR | LG 47WV50MS-B Owner’s Manual

OWNER’S MANUAL
LG Digital Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it
for future reference.
47WV50BR
47WV50MS
47WV50BS
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
4LICENSES
5
ASSEMBLING AND
PREPARING
5Accessories
6Parts
21
- Customizing PC Display Options
21
Adjusting the Sound
21
- Selecting an Sound Mode
22
- Customizing Sound Options
22
Using Additional Options
22
- Adjusting Aspect Ratio
24
- Using the Input List
7
To Install in a Portrait Layout
7
Remove L-brackets before Installation
25ENTERTAINMENT
8
STORAGE METHOD FOR PANEL
25
- Connecting to a Wired Network
26
- Network Status
27
- Connecting USB Storage Devices
28
- Browsing Files
30
- Viewing Movies
33
- Viewing Photos
36
- Listening to Music
38
- Viewing the Contents List
39
-DivX® VOD Guide
40
- Using PIP/PBP
PROTECTION
8
- Correct Method
8
- Incorrect Method
9
Installing on a Wall
11
EXTERNAL EQUIPMENT SETUP
11
- IR RECEIVER
12
Tiling Displays
12
- How to Mount the Set
13
- How to Join Sets
14 REMOTE CONTROL
41 CUSTOMIZING SETTINGS
16
41
Accessing the Main Menus
42
- PICTURE Settings
45
- AUDIO Settings
46
- TIME Settings
47
- OPTION Settings
52
Picture ID
53
- NETWORK Settings
Displaying the Device Name Connected
to an Input Port
17 USING THE MONITOR SET
17
Connecting to a PC
17
- RGB Connection
18
- DVI Connection
18
- HDMI Connection
19
- Display Port Connection
54 MAKING CONNECTIONS
19
- IR Receiver Connection
20
Adjusting the Screen
55
External Device Connection
20
- Selecting an Image Mode
55
- DVI Connection
20
- Customizing Image Options
55
- HDMI Connection
56
- Component Connection
56
- AV(CVBS) Connection
57
Connecting to the LAN
57
Connecting to a USB
58
Daisy Chain Monitors
58
- RGB Cable
TABLE OF CONTENTS
- DVI Cable
59TROUBLESHOOTING
62SPECIFICATIONS
65 IR CODES
66 CONTROLLING THE MULTIPLE
PRODUCT
66
Connecting the cable
66
RS-232C Configurations
66
Communication Parameter
67
Command Reference List
69
Transmission / Receiving Protocol
ENG
ENGLISH
58
3
4
LICENSES
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays
DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com.
Find your registration code in the DivX VOD section of your device setup
menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and
are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 8,656,183; 8,731,369; RE45,052.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
NOTE
Product damage from moving or changing the installation location is not covered by warranty.
yy
The warranty will not cover any damages caused by using the product in an excessively dusty
yy
environment.
ASSEMBLING AND PREPARING
5
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
CD (Owner's Manual) / Cards
Power Cable Holder
Remote Control
and Batteries
M4 x L8
Screws (8 ea)
Power Cord
RS-232C Cable
IR Receiver
Short Vertical
Tiling Guide
(2 ea)
M6
Screws (4 ea)
DVI Cable
Long Horizontal
Tiling Guide
(2 ea)
Mounting Cable Tie (2 ea)
(For Cable Arrangement)
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
SuperSign SW & Manual
yy
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your
model.
ENG
ENGLISH
ASSEMBLING AND PREPARING
6
ASSEMBLING AND PREPARING
Parts
ENGLISH
ENG
< 47WV50BR / 47WV50MS >
USB
DP
/DVI
DVI IN
DVI OUT
RGB
/COMPONENT OUT
AUDIO
IN
LAN
COMPOSITE
SPEAKER
RGB
/COMPONENT IN
REMOTE
CONTROL IN
Connection panel
< 47WV50BS >
USB
DP
/DVI
DVI IN
DVI OUT
RGB
/COMPONENT OUT
AUDIO
IN
RGB
/COMPONENT IN
REMOTE
CONTROL IN
Connection panel
LAN
SPEAKER
ASSEMBLING AND PREPARING
7
To Install in a Portrait Layout
Remove L-brackets before Installation
Remove the L-brackets from each corner of the monitor before installing it.
NOTE
Keep the removed L-brackets and use them when moving the monitor later.
yy
ENG
ENGLISH
When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
8
ASSEMBLING AND PREPARING
STORAGE METHOD FOR PANEL PROTECTION
ENGLISH
ENG
Correct Method
Incorrect Method
Panel
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully
for. Do not let the panel not to touch the floor.
Panel
If the product is tilted onto the bezel, the bottom of
the panel may be damaged.
Cushion
Panel
When laying down the product, lay a cushion on a
flat floor. Put the product on it with the panel of
the product facing down.
Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.
If there is not a cushion available, ensure the floor
is clean and then lay the product down carefully
with the panel facing either upward or downward.
At this time, be careful for objects not to fall on the
panel.
ASSEMBLING AND PREPARING
Installing on a Wall
CAUTION
10 cm
20 cm
10 cm
10 cm
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation.
Use the wall mount plate and screws that comply
with the VESA standard.
NOTE
Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in a
closet) or on a carpet or cushion. If there is
no other option but to mount the product on
the wall, make sure that sufficient ventilation
is provided before installation.
- Failure to do so may result in a fire due to
the increase in the internal temperature.
Disconnect the power cord first, and then
yy
move or install the monitor set. Otherwise
electric shock may occur.
If you install the monitor set on a ceiling or
yy
slanted wall, it may fall and result in severe
injury.
Do not over tighten the screws as this may
yy
cause damage to the monitor set and void
your warranty.
Use the screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
To prevent injury, this apparatus must be
yy
securely attached to the wall in accordance
with the installation instructions. (This only
pertains to Australia and New Zealand.)
ENG
ENGLISH
To install the Monitor on a wall (optional),
use the VESA screws provided as accessories to
fasten it.
10 cm
9
10
ASSEMBLING AND PREPARING
Securing the product to a wall (optional)
ENGLISH
ENG
(Depending on model)
1 Insert and tighten the eye-bolts, or product
brackets and bolts on the back of the product.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the product.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
yy
hang on the product.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the product securely.
Brackets, bolts, and ropes are optional. You
yy
can obtain additional accessories from your
local dealer.
WARNING
If a product is not positioned in a sufficiently
yy
stable location, it can be potentially
hazardous due to falling. Many injuries,
particularly to children, can be avoided by
taking simple precautions such as:
»» Using cabinets or stands recommended
by the manufacturer of the product.
»» Only using furniture that can safely
support the product.
»» Ensuring the product is not overhanging
the edge of the supporting furniture.
»» Not placing the product on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the product to a suitable support.
»» Not standing the product on cloth or other
materials placed between the product
and supporting furniture.
»» Educating children about the dangers of
climbing on furniture to reach the product
or its controls.
ASSEMBLING AND PREPARING
11
EXTERNAL EQUIPMENT SETUP
ENG
ENGLISH
IR RECEIVER
This allows a remote control sensor to be placed in a custom location. Then that display can control other
displays via an RS-232C cable.
AUDIO
IN
REMOTE
CONTROL IN
NOTE
Make sure that you unplug the power cord before connecting or removing the IR Receiver.
yy
12
ASSEMBLING AND PREPARING
Tiling Displays
ENGLISH
ENG
How to Mount the Set
Example of 2 x 2 Tiling
Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.
Screws for attaching the
VESA wall mount
16-M4 Screw
≤ 6 mm
<Rear view of the set with the wall mount plate>
ASSEMBLING AND PREPARING
13
How to Join Sets
Join other sets using screws for fixing the VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to adjust the gap between the sets.
3 Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
NOTE
The load applied to each set should be supported by the wall mount plate or the wall using a VESA
yy
wall mount (600 x 400).
The load applied to each set should be supported by the wall mount plate using a VESA wall mount.
yy
(Each set must be firmly mounted to the wall mount plate or the wall.)
You may mount the set without using the tiling guide; this does not affect the performance of the
yy
device.
Loosen the screws on the set to install the tiling guides. (The screws are enclosed with the other
yy
components in the box, including the tiling guides.)
ENG
ENGLISH
1
14
REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control to the
yy
remote control sensor on the monitor set.
(POWER)
Turns the monitor set on or off.
ENERGY SAVING( )
Adjusts the brightness of
the screen to reduce energy
consumption.
MONITOR ON
Turn on the monitor.
MONITOR OFF
Turn off the monitor.
INPUT
Selects the input mode.
3D
This button does not apply to
this model.
1/a/A Button
Toggles between numerical
and alphabetical.
Number and Alphabet Buttons
Enters numerical or alphabetical
characters depending on the
setting.
ARC
Selects the Aspect Ratio
Mode.
Volume Up / Down
Adjusts the volume level.
CLEAR
Deletes the entered numerical
or alphabetical character.
PSM
Selects the Picture Status
Mode.
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.
MUTE
Mutes all sounds.
BACK
ID
TILE
EXIT
REMOTE CONTROL
15
ENG
ENGLISH
INFO ⓘ
Displays the input
information.
SETTINGS
Accesses the main menus
or saves your input and exit
menus.
OK
Selects menus or options and
confirms your input.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
W.BAL
Enters the White Balance
menu.
S.MENU
(SuperSign Menu Key)
This button does not apply to
this model.
Navigation Buttons
Scrolls through menus or
options.
BACK
Allows the user to move back
one step in user interaction
function.
This button selection is not
applicable.
ID ON/OFF
When the number of Picture
ID is equal to Set ID you can
control the monitor which
you want in the multi display
condition.
EXIT
Clears all on-screen displays
and returns to Monitor set
viewing from any menu.
TILE
Selects the TILE Mode.
USB Menu control buttons
Controls media playback.
16
REMOTE CONTROL
Displaying the Device Name Connected to an Input Port
ENGLISH
ENG
Display which devices are connected to which
external input ports.
1Access the Input list screen and press the blue
(input label) button on the remote control.
2You can assign an input label for every input
except USB.
Input Label
HDMI
DVI-D
Display Port
Close
NOTE
External inputs supported: HDMI, DVI-D,
yy
Display Port
Labels available: PC, DTV
yy
The input labels are displayed on the Input
yy
Label screen or at the top left of the screen
when you change the external input setting.
For DTV/PC-compatible signals, such as
yy
1080p 60 Hz, the screen settings may
change according to the input label. The Just
Scan option is available if a PC is connected
as an external device.
USING THE MONITOR SET
17
Connecting to a PC
RGB Connection
Your Monitor set supports the Plug & Play* feature.
Transmits the analog video signal from your PC to
the monitor set. Connect the PC and the Monitor
set with the 15-pin signal cable as shown the
following illustrations.
Select RGB input.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
Back of the product.
AUDIO
RGB
/COMPONENT OUT
NOTE
IN
RGB
/COMPONENT IN
REMOTE
It is recommended to use the monitor set
yy
with the HDMI connection for the best image
quality.
To comply with the specifications of the
yy
product, use a shielded interface cable with
ferrite core, such as a D-sub 15-pin cable
and DVI/HDMI cable.
If you turn the monitor set on when the set
yy
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
CONTROL IN
Macintosh Adapter
(not included)
(not
included)
(not included)
PC/MAC
PC
CAUTION
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
yy
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
U se the standard Macintosh
yy
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
ENG
ENGLISH
USING THE MONITOR SET
18
USING THE MONITOR SET
ENGLISH
ENG
DVI Connection
HDMI Connection
Transmits digital video signal from your PC to
the monitor set. Connect the PC and the monitor
set with the DVI cable as shown the following
illustrations.
Select DVI input.
Transmits digital video and audio signals from your
PC to the monitor set. Connect the PC and the
monitor set with the HDMI cable as shown in the
following illustrations.
Select HDMI input.
Back of the product.
AUDIO
IN
DVI IN
DVI IN
AUDIO
IN
Back of the product.
AUDIO
IN
/DVI
IN
REMOTE
REMOTE
/DVI
IN
DP
DP
REMOTE
CONTROL IN
CONTROL IN
CONTROL IN
R
(not included)
(not included)
PC
PC
PC
NOTE
Use a High Speed HDMI®/TM Cable.
yy
Please check the PC environment if you
yy
cannot hear audio in HDMI mode. Some PCs
require you to manually change the default
audio output to HDMI.
If you want to use HDMI-PC mode, you must
yy
set the input label to PC mode.
When HDMI PC is used, a compatiblity
yy
problem might occur.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
USING THE MONITOR SET
IR Receiver Connection
Transmits digital video and audio signals from
your PC to the Monitor. Connect the PC and the
Monitor with the Display Port cable as shown in
the following illustrations.
Select Display Port input source.
Allows the use of IR receiver extension.
/DVI
IN
Back of the product.
DP
AUDIO
DP
/DVI
IN
Back of the product.
IN
AUDIO
IN
REMOTE
REMOTE
CONTROL IN
(not included)
PC
NOTE
Sound may not be available depending on
yy
the DP version of your PC.
CONTROL IN
ENG
ENGLISH
Display Port Connection
19
20
USING THE MONITOR SET
ENGLISH
ENG
Adjusting the Screen
Customizing Image Options
Selecting an Image Mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images in its optimized settings by
selecting one of the preset image modes.
1Press SETTINGS to access the main menus.
1Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to
PICTURE and press OK.
3 Press the navigation buttons to scroll to
Picture Mode and press OK.
4 Press the navigation buttons to scroll to an
image mode you want and press OK.
Mode
2 Press the navigation buttons to scroll to
PICTURE and press OK.
3 Press the navigation buttons to scroll to
Picture Mode and press OK.
4 Press the navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Description
Vivid
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for the normal
environment.
Cinema
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and
dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast
gaming screen such as PCs or games.
5 When you are finished, press EXIT.
Option
Description
Backlight
djusts the brightness of the screen
A
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright part of the
picture is saturated.
Brightness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark part of the picture is
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Control
Customizes the advanced options.
Refer to the Advanced image options.
Picture Reset
Restores the options to the default
setting.
When you return to the previous menu, press
BACK.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
USING THE MONITOR SET
21
Adjusting the Sound
Customize options of each image mode for the
best image quality.
This function works in the following mode:
yy
RGB [PC] mode.
Selecting an Sound Mode
1Press SETTINGS to access the main menus.
1Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to
2 Press the navigation buttons to scroll to AUDIO
3 Press the navigation buttons to scroll to Screen
3 Press the navigation buttons to scroll to Sound
4 Select and adjust following options, and then
4 Press the navigation buttons to scroll to a
PICTURE and press OK.
and press OK.
press OK.
Play the sound in its optimized settings by
selecting one of the preset sound modes.
and press OK.
Mode and press OK.
sound mode you want and press OK.
Description
Mode
Resolution
Selects a proper resolution.
Standard
Auto
Config.
Sets to adjust the screen position, clock,
and phase automatically. The displayed
image may be unstable for a few seconds
while the configuration is in progress.
Select when you want standard-quality
sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sports
Select when you watch sports events.
Game
Select when you play games.
Option
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Description
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
Customizing PC Display Options
22
USING THE MONITOR SET
ENGLISH
ENG
Customizing Sound Options
Using Additional Options
Customize options of each sound mode for the
best sound quality.
Adjusting Aspect Ratio
1Press SETTINGS to access the main menus.
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
Monitor set.
2 Press the navigation buttons to scroll to AUDIO
and press OK.
3 Press the navigation buttons to scroll to Sound
CAUTION
Mode and press OK.
4 Press the navigation buttons to scroll to a
sound mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Description
Infinite
LG's Infinity Sound option provides 5.1
Sound
channel stereo sound quality from two
If a fixed image displays on the screen for a
yy
long period of time, it could be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
If the aspect ratio is set to 4:3 for a long
yy
period of time, image burn may occur on the
letterboxed area of the screen.
speakers.
Treble
Increases the intensity of the high
frequency part of audio.
Bass
frequency part of audio.
Reset
NOTE
Increases the intensity of the low
Resets the sound mode to the default
setting.
You can also change the image size by
yy
accessing the main menus.
47WV50BS is not supporting composite(AV)
yy
signal & input.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
MODE
AV Component
ARC
RGB
PC
Display
Port
DVI-D
HDMI
DTV PC DTV PC DTV PC
16:9
o
o
o
o
o
o
o
o
o
Just Scan
x
o
x
o
x
o
x
o
x
1:1
x
x
o
x
o
x
o
x
o
4:3
o
o
o
o
o
o
o
o
o
Zoom
o
o
x
o
x
o
x
o
x
Cinema
Zoom
o
o
x
o
x
o
x
o
x
USING THE MONITOR SET
23
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
- Cinema Zoom : Choose Cinema Zoom when
you want to enlarge the picture in correct
proportion.
Note: When enlarging or reducing the picture,
the image may become distorted.
ENG
ENGLISH
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
24
USING THE MONITOR SET
Using the Input List
ENGLISH
ENG
Selecting an Input Source
1Press INPUT to access the input source list.
2 Press the navigation buttons to scroll to one of
the input sources and press OK.
Input source
Description
AV
Watch video from a VCR or other
external devices.
Component
Watch the content from a DVD or
other external devices, or through a
digital set-top box.
RGB
View a PC display on the screen.
DVI-D
View a PC display on the screen.
HDMI
Watch contents from a PC, DVD
of Digital set-top box other high
definition devices.
Display Port
Watch contents in a PC, DVD
of Digital set-top box other high
definition devices.
USB
Plays the multimedia file saved in
the USB.
NOTE
47WV50BS is not supporting composite(AV)
yy
signal & input.
ENTERTAINMENT
25
Connecting to a Wired Network
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustration and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of networks may require the display network settings to be adjusted. For most networks,
the display will connect to automatically without
any adjustments.
For detail information, contact your internet provider or router manual.
To set up the network settings: (Even if your display has already connected automatically, running
setup again will not harm anything),
1Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NETWORK and press OK.
3 Press the navigation buttons to select Network
Setting and press OK.
4 If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5Select IP Auto Setting or IP Manual Setting.
LAN
Router
Router
@
LAN
Cable modem
Internet
Internet
WAN
-IP Manual Setting: Press the navigation and
number buttons. IP addresses will need to be
input manually.
-IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
ETHERNET
Cable modem
CAUTION
yy
Do not connect a modular phone cable to
the LAN port.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
yy
Network setting menu will not be available until the display connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENG
ENGLISH
ENTERTAINMENT
26
ENTERTAINMENT
NOTE
ENGLISH
ENG
yy
If you want to access the Internet directly on
your display, the Internet connection should
always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yy
If you do not complete the network settings,
the network may not work properly.
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits sub-scription to one device, this display
may not be allowed to connect when a PC is
already connected.)
yy
The use of a “Router” may not be allowed or its
usage may be limited depending on the policies and restrictions of your ISP. For details,
contact your ISP directly.
Tips for Network Setting
yy
Use a standard LAN cable with this display.
Cat5 or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
network, quickly power off and/or disconnect
the power cable of the network router or cable
modem. Then power on and/or connect the
power cable again.
yy
Depending on the Internet service provider
(ISP), the number of devices that can receive
Internet service may be limited by the applicable terms of service. For details, contact your
ISP.
yy
LG is not responsible for any malfunction of the
display and/or the Internet connection feature
due to communication errors/malfunctions associated with your Internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow
for such a connection, you will not be able to
connect the display.
Network Status
1Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to
NETWORK and press OK.
3 Press the navigation buttons to select
Network Status.
4Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after setting the network.
Return to the previous menu.
ENTERTAINMENT
Connecting USB Storage Devices
or
CAUTION
yy
Do not turn the display off or remove a USB
storage device while EMF (my media) Menu
is activated, as this could result in loss of
files or damage to the USB storage device.
yy
Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
Tips for Using USB Storage Devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition programme may not be recognized.
yy
A USB storage device which uses its own
driver may not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
yy
Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files or movie files.
yy
Please use only a USB storage device which
was formatted as a FAT32 file system, NTFS
file system provided with the Windows operating system. In case of a storage device
formatted as a different utility program which
is not supported by Windows, it may not be
recognized.
yy
Please connect power to a USB storage device (over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable offered by the device maker.
yy
Some USB storage devices may not be supported or operated smoothly.
yy
File alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
ENG
ENGLISH
Connect USB storage devices such as a USB
flash memory, external hard drive to the display
and use multimedia features (See "Browsing Files"
on page 28).
Connect a USB flash memory or USB memory
card reader to the Display as shown on the following illustration. The My media screen appears.
27
28
ENTERTAINMENT
ENGLISH
ENG
yy
Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
yy
If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
yy
If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
yy
If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yy
If the USB memory device does not work
properly, disconnect and reconnect it.
yy
How fast a USB memory device is detected
differs from device to device.
yy
If the USB is connected in Standby Mode,
specific hard disk will automatically be
loaded when the display is turned on.
yy
The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
yy
Any device with more than the recommended
capacity may not work properly.
yy
If a USB external hard disk with a “Energy
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy
Maximum of 999 folders or files can be recognized under one folder.
yy
A USB 3.0 storage device may not work.
yy
Data on some USB storage devices may be
damaged in a high temperature environment.
Browsing Files
Access the photo, music, or movie lists and browse
files.
1 Connect a USB storage device.
2 Press SETTINGS to access the main menus.
3 Press the navigation buttons to scroll to My
Media and press OK.
4 Press the Navigation buttons to choose
from Movie List, Photo List, Music List or
Contents List and press OK. (The function of
Contents List may not be supported depending
on the model.)
Movie List
Photo List
Music List
2
1
Page 1/1
Photo List
USB External
001
002
010
011
Drive1
Page 1/1
003
004
005
006
012
013
014
015
Move
To Music List
Contents List
Change Numbers
007
008
View
Mark Mode
P
009
4
5
Page Change
Exit
3
No.
Description
1
Moves to upper level folder
2
Current page/Total pages
3
Corresponding buttons on the
remote control
4
Current page/ total pages of contents under
the folder focused on 1
5
Contents under the folder focused on 1
Button
Description
Green
button
Press the green button to toggle between
Photo List -> Music List, Music List ->
Contents List, Contents List -> Movie List
or Movie List -> Photo List.
Yellow
button
A method to view in 5 large thumbnail or
simple list.
Blue
button
Convert to Mark Mode.
ENTERTAINMENT
29
Supported File Format
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,TRP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file
Video format : DivX 3.11, DivX4, DivX5. DivX6
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg, MP3, LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.psb(PowerDivX)
Photo
Internal Subtitle format : only, XSUB (It is the subtitle format used in DivX6 files)
JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
yy You can play JPEG files only.
yy Non-supported files are displayed in the form of predefined icon.
File
Profile
Item
Extensions
jpeg
jpg
jpe
supported
file format
photo size
SOF0: baseline
SOF1: Extend Sequential
SOF2: Progressive
Min: 64 x 64
Max-Normal Type:
15360 (W) x 8640 (H)
Progressive Type:
1920 (W) x 1440 (H)
Music
MP3
Bit rate 32 to 320
yy Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz
yy Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz, 24 kHz
yy Sampling rate MPEG2.5 Layer3 : 8 kHz, 11.025 kHz, 12 kHz
ENG
ENGLISH
Type
Movie
30
ENTERTAINMENT
Viewing Movies
5Play a movie.
ENGLISH
ENG
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
1 Press the navigation buttons to scroll to My
Media and press OK.
NOTE
yy
Non-supported files are displayed the preview
image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
2 Press the navigation buttons to scroll to Movie
List and press OK.
3 Press the navigation buttons to scroll to a
6 Control playback by using the following buttons.
folder you want and press OK.
4 Press the navigation buttons to scroll to a file
you want and press OK.
01:02:30 / 02:30:25
Page 1/1
Movie List
MENU
Drive1
USB1 USB Drive
001
002
005
006
003
Movie List
Mark Mode
002
005
006
Page Change
Mark All
Plays a video.
Scans backward in a file.
Scans forward in a file.
Page 1/1
003
SETTINGS
004
051. Apple_ ......
02:30:25
Unmark All
Description
Stops the playback.
Pauses or resumes the playback.
Move
Menu
P
Exit
Drive1
001
Play Marked
Play
Mark Mode
Page 1/1
USB1 USB Drive
Exit
004
Move
Change Numbers
Hide
Page 1/1
Button
To Photo list
Option
BACK
EXIT
Mark
Exit Mark Mode
P
Page Change
Exit
Description
Play Marked
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Mark All
Mark all movie files on the screen.
Unmark All
Deselect all marked movie files.
Exit Mark
Mode
Exit the Mark Mode.
or
ENERGY
SAVING
Show the Option menu.
Hide the menu on the full-sized screen.
Return to Movie List.
Skips to specific points in a file during
playback. The time of a specific point
will appear on the status bar. In some
files, this function may not work properly.
Adjusts the screen brightness to save
energy.
ENTERTAINMENT
Tips for Using Playing Video Files
Video Options
1 Press SETTINGS to access the Pop-Up
menus.
2 Press the navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
yy
When replaying the video file after stopping,
you can play from where it stopped previously.
ENG
ENGLISH
yy
Some user-created subtitles may not work
properly.
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
Movie files produced with some encoders
may not be played correctly.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
Videos with resolutions higher than
1920X1080@25/30P may not work properly
depending on the frame.
yy
Movie files other than the specified types and
formats may not work properly.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yy
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
not supported for playback.
yy
A DivX movie file and its subtitle file must be
located in the same folder.
yy
A video file name and its subtitle file name
must be identical for it to be displayed.
yy
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
yy
Files encoded with GMC(Global Motion
Compensation) may not be played.
31
32
ENTERTAINMENT
When you select the Set Video Play,
ENGLISH
ENG
1 Press the navigation buttons to scroll to show
Code Page
Latin1
German, Italian, Portuguese,
the Picture Size, Audio Language, Subtitle
Language, or Repeat.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
Support Language
English, Spanish, French,
Danish, Romanian, Norwegian,
Albanian, Gaelic, Welsh, Irish,
Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Latin2
Slovak, Slovenian, Serbian,
Hungarian
Menu
Picture Size
Description
Selects your desired picture
Audio
format during movie play.
Changes the Language Group of the
Language
audio during movie play. Files
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Greek
Greek
Turkish
Turkish
Korean
Korean
with a single audio track cannot be
selected.
Subtitle
Turn on/off the subtitle.
Language
Language
Activated for SMI subtitle and
can select the language within the
subtitle.
Code Page
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Sync
Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
Position
Changes the position of the
subtitle either up or down during
movie play.
Size
Selects your desired Subtitle size
during movie play.
Repeat
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
is turned off, it can run the playback if
the file name is similar to the previous
file.
NOTE
yy
Only 10,000 of sync blocks can be supported
within the subtitle file.
yy
When playing a video, you can adjust the
Picture Size by pressing the ARC button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
ENTERTAINMENT
When you select the Set Video,
appropriate adjustments.
Page 1/1
Photo List
USB1 USB Drive
001
Drive1
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
When you select the Set Audio,
View
Move
Change Numbers
To Music List
009
P
Page Change
Exit
Mark Mode
1 Press the navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
008
007
Page 1/1
Photo List
Mark Mode
USB1 USB Drive
Drive1
Page 1/1
2 Press the navigation buttons to scroll to make
appropriate adjustments.
001
010
002
011
003
004
005
006
012
013
014
015
Mark
Move
Viewing Photos
View Marked
Mark All
Unmark All
008
007
Exit Mark Mode
009
P
Page Change
Exit
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
View Marked
Display the selected photo file.
1 Press the navigation buttons to scroll to My
Mark All
Mark all photo files on the screen.
Unmark All
Deselect all marked photo files.
Media and press OK.
2 Press the navigation buttons to scroll to Photo
List and press OK.
3 Press the navigation buttons to scroll to a
folder you want and press OK.
Menu
Description
Exit Mark Mode Exit the Mark Mode.
5 View photos.
4 Press the navigation buttons to scroll to a file
you want and press OK.
NOTE
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
ENG
ENGLISH
1 Press the navigation buttons to scroll to make
33
34
ENTERTAINMENT
Using Photo Options
ENGLISH
ENG
Use the following options while viewing photos.
Option
ENERGY
SAVING
Description
Adjusts the screen brightness to save
energy.
yy Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
yy TransitionEffect: Set the view mode
of the slideshow.
yy BGM: Selects a music folder for the
background music.
NOTE
yyYou cannot change the music
folder while the background
music is playing.
yyYou can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Slideshow
BGM
Options
Option
Slideshow
BGM
MENU
Option
Hide
Exit
Number of selected photos
Description
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos saved in the current folder display
during a slideshow.
To set a slideshow speed, select Option.
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust Option by SETTINGS
button on the remote control.
Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
View the photo by zoom in 2, 4 times.
NOTE
yyPhotos with a resolution of
960x540 or less cannot be
enlarged.
Hides the option window.
To display the options, press OK.
Return to Photo List.
Photo options
1 Press SETTINGS to show the Option menus.
2 Press the navigation buttons to scroll to Set
Photo View, Set Video, or Set Audio and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
ENTERTAINMENT
35
When you select the Set Photo View,
2 Press the navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide.
Fade In
The current photo disappears and the next photo appears slowly.
ENG
ENGLISH
1 Press the navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.
36
ENTERTAINMENT
When you select the Set Video,
Listening to Music
ENGLISH
ENG
1 Press the navigation buttons to scroll to make
appropriate adjustments.
1 Press the navigation buttons to scroll to My Media and press OK.
2 Press the navigation buttons to scroll to Music
When you select the Set Audio,
1 Press the navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
List and press OK.
3 Press the navigation buttons to scroll to a folder
you want and press OK.
4 Press the navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Play
Move
Change Numbers
To Movie List
P
Page Change
Exit
Mark Mode
Page 1/1
Music List
Mark Mode
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play Marked
Menu
Mark All
Unmark All
Mark
P
Page Change
Exit Mark Mode
Exit
Description
Play Marked
Display the selected music file.
Mark All
Mark all music files on the screen.
Unmark All
Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
ENTERTAINMENT
6 Control playback by using the following buttons.
004. - B04.mp3
00:00
Drive1
005. - B05.mp3
00:00
006. - B06.mp3
00:00
Page 1/1
007. - B07.mp3
00:00
005. - B05.mp3
02:30 / 03:25
Play with Photo
Button
NOTE
008. - B08.mp3
00:00
MENU
Option
Hide
Exit
Description
Stops playing back the file and moves
back to the music list.
Plays a music file.
Pauses or resumes playback.
Skips to the previous file.
Skips to the next file.
or
Green
button
ENERGY
SAVING
◄ or ►
When playing,
When you press the v button, the previous music file will be played.
When you press the w button, the next
music file will be played.
Start playing the selected music files and
then move to the Photo List.
Adjusts the screen brightness to save
energy.
Show the Option menu.
Hides the option window.
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
Skips to specific points in a file during
playback. The time of a specific point will
appear on the status bar. In some files,
this function may not work properly.
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
yy
A damaged or corrupted music does not play
but displays 00:00 in playtime.
yy
A music downloaded from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
yy
If you press OK,
buttons, screen saver is
stopped.
yy
The , ,
, ,
buttons on the remote
control are also available in this mode.
yy
You can use the
button to select the next
music and the
button to select the previous music.
file name
002. B02.mp3
00:31 / 04:04
Time elapsed /Duration
ENG
ENGLISH
3 file(s) Marked
Tips for playing music files
This unit cannot support the ID3 Tag
yy
embedded MP3 files.
Page 1/1
Music List
37
38
ENTERTAINMENT
Music Options
ENGLISH
ENG
1 Press SETTINGS to access the Pop-Up menus.
2 Press the navigation buttons to scroll to Set Audio Play or Set Audio and press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
Viewing the Contents List
Plays back the stored files using the Export option
in SuperSign Manager.
1 Press the Navigation buttons to scroll to My
Media and press OK.
2 Press the Navigation buttons to scroll to Contents List and press OK.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
When you select the Set Audio Play,
1 Press the navigation buttons to scroll to select
the Repeat or Random.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
Page 1/1
Contents List
USB1 USB Drive
test1.cts
07/01/2011
Drive1
Page 1/1
test2.cts
07/01/2011
test3.cts
07/01/2011
test4.cts
07/01/2011
test5.cts
07/01/2011
Move
To Movie List
Change Numbers
Play
P
Page Change
Exit
When you select the Set Audio,
1 Press the navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
NOTE
yy
While playing media files from Contents List,
only the BACK, EXIT or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
yy
If there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
yy
The function of Contents List may not be
supported depending on the model.
ENTERTAINMENT
DivX® VOD Guide
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
DivX® VOD Deregistration
You should deregister your device with 8 digit DivX
deregistration code from your device at
www.divx.com/vod.
1Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to MY MEDIA and press OK.
1Press SETTINGS to access the main menus.
3 Press the Blue button.
2 Press the navigation buttons to scroll to MY ME-
4 Press the navigation buttons to scroll to Deacti-
3 Press the Blue button.
5 Press the navigation buttons to select Yes to
DIA and press OK.
4 Press the navigation buttons to scroll to DivX
vation and press OK.
confirm.
Reg. Code and press OK.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
5 View the registration code of your display.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Yes
No
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Close
NOTE
yy
While you are checking the registration
code, some buttons may not work.
yy
If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
product.
yy
The video or audio files that are not converted by the standard DivX codec may be
corrupted or not be played.
yy
The DivX VOD code allows you to activate
up to 6 devices under one account.
NOTE
Once the deregistration is executed, you
yy
must register your device again to see DivX®
VOD contents.
ENG
ENGLISH
DivX® VOD Registration
39
40
ENTERTAINMENT
Using PIP/PBP
5Select the PIP or PBP icon from the play list.
ENGLISH
ENG
Displays videos or photos stored on a USB device
on a single monitor by dividing it into the main and
sub screens.
1Press the SETTINGS button to move to
OPTION and press OK.
2 Press PIP/PBP to select PIP or PBP and then
01:02:30 / 02:30:25
press OK.
MENU
Exit
Hide
Option
< Movie List >
PIP/PBP
Mode
Move
Pre.
Off
Position
PIP
Size
PBP
3Select Movie List or Photo List from My
Media. (With PIP/PBP selected, the Music
List and Contents List are deactivated. The
function of Contents List may not be supported
depending on the model.)
2/13
Slideshow
MENU
BGM
Option
Hide
Exit
< Photo List >
Movie List
Photo List
Music List
6Select either Main or Sub for sound. You must
Contents List
4 Select a file you want and then press OK.
to select the output sound before running the
PIP or PBP function.
Page 1/1
Movie List
Select the sound path.
Drive1
USB1 USB Drive
001
002
005
006
Page 1/1
003
Main
004
Sub
7The sub screen is displayed on the main
screen.
Move
To Photo list
Change Numbers
Mark Mode
Play
P
Exit
Page Change
CUSTOMIZING SETTINGS
ENG
ENGLISH
CUSTOMIZING SETTINGS
Accessing the Main Menus
1Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to one of the following menus and
press OK.
3 Press the navigation buttons to scroll to the setting or option you want
and press OK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE
Adjusts the image size,
quality, or effect.
PICTURE
OPTION
Customizes the general
settings.
OPTION
AUDIO
Adjusts the sound quality,
effect, or volume level.
AUDIO
NETWORK
NETWORK
Sets up the network
setting.
41
TIME
MY MEDIA
TIME
Sets the time, date, or
timer feature.
MY MEDIA
Display and play movie,
photo and music content
stored on your USB.
42
CUSTOMIZING SETTINGS
PICTURE Settings
PICTURE
ENGLISH
ENG
1Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to PICTURE and
press OK.
Move
• Aspect Ratio
: 16:9
•
Energy Saving : Off
• Easy Brightness Control : Off
• Smart Energy Saving
: Off
OK
ꔋ
• Picture Mode : Standard
• Backlight 70
• Contrast option you want and press OK.
• Brightness 50
-To return to the previous level, press BACK.
• Sharpness 50
• Color • Tint 0
R
G
• Color Temp. 0
W
C
• Advanced Control
• Picture Reset
• TruMotion
: Low
3 Press the navigation buttons to scroll to the setting or
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
100
60
• Screen
The available picture settings are described in the following:
Setting
Aspect Ratio
Description
Changes the image size to view images at its optimal size.
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Energy Saving Level
Easy
Brightness
Control
Off
Disables Energy Saving function.
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen Off
The screen turns off in 3 seconds.
Adjusts the backlight according to the schedule you set.
Mode
Off
Disables Easy Brightness Control.
On
Enables Easy Brightness Control.
NOTE
yyEasy Brightness Control is disabled if the current time is not set.
yyIf Energy Saving is set to Maximum, Easy Brightness Control is disabled.
yyYou can set up to six schedules and they will be sorted in time ascending order.
yyIf more than six schedules are added, the latest schedule will be automatically deleted.
yyYou can delete a schedule by pressing the OK button.
yyDuplicate schedules are not added, but the backlight value changes.
yyIt may not be supported depending on the model.
Smart Energy
Saving
Picture Mode
Adjusts the backlight and contrast depending on the screen brightness.
Level
Off
Disables the Smart Energy Saving function.
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode. The available preset
picture modes vary depending on the monitor set .
43
CUSTOMIZING SETTINGS
Setting
SCREEN
(In RGB
Mode Only)
Description
Corrects images to display smoother motion sequences.
TruMotion
• Low : De-Judder / De-Blur value is set to 3.
• High : De-Judder / De-Blur value is set to 7.
• De-Judder
• User : De-Judder / De-Blur can be set manually.
• De-Blur
-D
e-Judder : This function adjusts juddering of
the screen.
- De-Blur : This function adjusts and eliminates blurring of the screen.
◄
Low
►
3
3
OK
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Configure
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Basic Image Options
Setting
Description
Backlight
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp .
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options. Refer to the Advanced image options.
Picture Reset
Restores the options to the default setting.
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport, or Game
yy
the subsequent menus will be automatically set.
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
yy
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
In Vivid mode, the luminance of the backlight is calibrated, so the settings may be different depending
yy
on each product.
ENG
ENGLISH
TruMotion
44
CUSTOMIZING SETTINGS
Advanced Control
ENGLISH
ENG
Setting
Dynamic
Contrast
(Off/High/
Medium/Low)
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (This function can be used
only under component.)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
(Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can
be used only component.)
Clear White
(Off/High/Low)
Make the white area of screen brighter and more white.
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise
Reduction
(Off/High/
Medium/Low)
Reduces screen noise without compromising video quality. (This function can be used only under
Component.)
Digital Noise
Reduction
(Off/High/
Medium/Low)
This option reduces the noise produced while creating digital video signals.
Gamma
(High/Medium/
Low)
Set your own gamma value. On the monitor, high gamma values display whitish images and low
gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - Component, HDMI-DTV)
CUSTOMIZING SETTINGS
AUDIO Settings
AUDIO
1Press SETTINGS to access the main menus.
Move
• Balance 2 Press the navigation buttons to scroll to AUDIO and press
OK.
3 Press the navigation buttons to scroll to the setting or
OK
: Off
ꔋ
0
L
• Sound Mode : Standard
• Infinite Sound: Off
• Treble 50
• Bass 50
R
• Reset
option you want and press OK.
• Digital Audio Input
• Speaker -To return to the previous level, press BACK.
: Off
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others, it helps users make dialog more clear.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
The most commanding and natural audio.
Music
Select this option to enjoy the original sound when listening to the music.
Cinema
Select this option to enjoy sublime sound.
Sport
Select this option to watch sports broadcasting.
Game
To enjoy dynamic sound when playing a game.
NOTE
If sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
Option
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound from two
speakers.
Treble
Controls the dominant sounds in the output. When you turn up the treble, it
will increase the output to the higher frequency range.
Bass
Makes the output sound softer. When you turn up the bass, it will increase
the output to the lower Frequency.
Reset
Resets the sound mode to the default setting.
Digital Audio
Input
HDMI/DisplayPort: Outputs the sound of digital signal from HDMI and display ports through the
monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
ENG
ENGLISH
• Clear Voice II 45
46
CUSTOMIZING SETTINGS
TIME Settings
TIME
Move
ENGLISH
ENG
• Clock
1Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to TIME and press OK.
3 Press the navigation buttons to scroll to the setting or option
you want and press OK.
-To return to the previous level, press BACK.
OK
ꔋ
• Daylight Saving : Off
• Off Time : Off
• On Time : Off
• Screen Off Time : Off
• Sleep Timer : Off
• Power On Delay : Off
• Auto Off
: 15 min.
• Automatic Standby: 4hours
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
Daylight Saving
Sets the current time one hour ahead of Standard Time in the summer season.
On/Off Time
Sets the time to turn on or off the monitor set.
Screen Off Time
Sets the time to turn off the screen.
Sleep Timer
Sets the length of time until the monitor set to turns off. When you turn the monitor set off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
Once the on or off time is set, these functions operate daily at the preset time.
yy
The scheduled power-off function works properly only when the device time is set correctly.
yy
When the scheduled power-on and power-off times are the same, the power-off time has priority over
yy
the power-on time if the set is turned on, and vice versa if the set is turned off.
CUSTOMIZING SETTINGS
OPTION Settings
OPTION
Move
2 Press the navigation buttons to scroll to OPTION and press
OK.
OK
ꔋ
• ISM Method : Normal
• DPM Select
: On
• Fail Over
: Off
• Factory Reset
3 Press the navigation buttons to scroll to the setting or option
you want and press OK.
• Set ID
:1
• Tile Mode
• PIP/PBP
• Fan
-To return to the previous level, press BACK.
• USB Content Recovery : Off
4 When you are finished, press EXIT.
• Product/Service Info.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
DPM Select
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
A user can choose to turn the power saving mode on / off.
NOTE
yyYou can set Energy Saving to Off or set the length of time before entering Energy Saving
mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
yyIt makes a little difference according to your environment.
yyIt may not be supported depending on the model.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Attempts to find another input source having video signal according to the
defined input order if no video signal comes from the current input source.
(Refer to the sequence of the table below.)
Current
Input Source
Attempt 1
Attempt 2
RGB
HDMI
DVI
HDMI
Attempt 3
Attempt 4
DVI
DP
DP
RGB
If there is no
available video
signal to switch to,
then the current
input source
remains.
HDMI
DVI
DP
RGB
DP
HDMI
DVI
RGB
Manual
The input source changes according to the specified order.
If there is no video signal from the specified input source, then the current
input source remains.
ENG
ENGLISH
• Language
1Press SETTINGS to access the main menus.
47
48
CUSTOMIZING SETTINGS
Setting
Description
ENGLISH
ENG
Factory Reset
Select this option to return to the default factory settings.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Tile Mode
Tile Mode
To use this function
- Must be displayed with various other products.
- Select Tile Mode, set rows and columns, and then enter the tile ID to set the
location.
- Tile Mode: row x column (row = 1-15, column = 1-15).
- 15 x 15 available.
Auto Config.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position
Moving the screen position horizontally and vertically.
Size
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
PIP/PBP
Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
and sub screens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Adjusts the position of the sub screen (top left, bottom left, top right, bottom
right)
The default value is the bottom right.
Size
Adjusts the size of the sub screen (Size 0 to 10).
The default size of PIP (Size: 0) is 480x270; the maximum size 10 is 960x540.
NOTE
yyThe Position and Size options are enabled only in PIP mode.
NOTE
If the interior temperature of the set exceeds 80°C, the set will be turned off automatically for safety
yy
reasons.
CUSTOMIZING SETTINGS
Setting
Description
Setting
Mode
This option indicates the monitor's internal temperature and controls the
fan.
• Auto: Switches the fan on and off according to the set temperature.
• On: The fan is always switched on.
• Manual: Switches the fan on and off according to user settings.
Hysteresis
The difference in temperature between when the fan is switched on and
when it is off.
Set Temperature
Set the temperature at which the fan is switched on.
Current Temperature
Current temperature inside the set.
NOTE
yyWe recommend that you use the Auto mode to prevent any malfunctions resulting from
incorrect fan settings.
yyIf the interior temperature of the set exceeds 80°C, the set will be turned off automatically
for safety reasons.
USB Content
Recovery
Replays the content in a USB when the power is back on if it is turned off during playing a content.
(This function operates the same when a USB is disconnected and connected again.)
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address, and home
page.
ENG
ENGLISH
Fan
(Only for
47WV50MS
model)
49
50
CUSTOMIZING SETTINGS
Tile Mode
ENGLISH
ENG
This monitor can be tiled with additional monitors to create a large tiled display.
Off
When the Tile Mode
option is disabled
1X2
When using 2 monitors
ID 1
3X3
When using 9 monitors
2X2
When using 4 monitors
ID 2
ID 1
ID 2
ID 1
ID 2
ID 3
ID 3
ID 4
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
Tile ID
4X4
When using 16 monitors
5X5
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 5
ID 6
ID 7
ID 8
ID 6
ID 7
ID 8
ID 9
ID 10
ID 9
ID 10
ID 11
ID 12
ID 11
ID 12
ID 13
ID 14
ID 15
ID 13
ID 14
ID 15
ID 16
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
CUSTOMIZING SETTINGS
PIP/PBP
Mode
*PIP (Picture In Picture): Displays the sub screen
in the main screen.
*PBP (Picture By Picture): Displays the sub
screen next to the main screen.
NOTE
The subscreen is only supported when using
yy
the USB device.
47WV50BS is not supporting composite(AV)
yy
signal & input.
Sub
USB
Main
Sub
Screen
Main
Screen
PIP
PBP
Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
top left
top right
bottom left
bottom right
Size
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0:
480x270
< 1920x1080 >
Component
O
RGB
O
HDMI/DVI-D/Display Port
O
AV
X
You can only change the size and position in
yy
PIP mode.
With PBP selected, the Aspect Ratio option
yy
in the PICTURE menu is disabled (Fixed as
16:9).
While running the PBP function, the Tile
yy
Mode function does not work.
You must select the output sound before
yy
running the PIP or PBP functions. (Select
either main or sub.)
If you fail to select main or sub from the
yy
sound selection box, and if the OSD
disappears after either a period of time or
when the Exit or Back key is pressed, the
PIP/PBP subscreen is not activated.
You cannot change the sound while running
yy
the PIP or PBP functions. If you want to
change the sound, please restart PIP/PBP.
The picture quality of the subscreen is set
yy
according to the values selected in the main
menu, not the USB device.
If you play videos you selected in PIP/PBP
yy
mode, the videos will play back repeately in
succession.
The buttons below work in PIP mode.
yy
Button
Photo
Movie
ENG
ENGLISH
Displays videos or photos stored in the USB device on
a single monitor by dividing it into the main and sub
screens.
51
52
CUSTOMIZING SETTINGS
Picture ID
ENGLISH
ENG
Picture ID is used to change the settings of a
specific display using a single IR receiver for
multi-vision. The set receiving the IR signal
communicates with another set via an RS232C
connection. Each set is identified by a Set ID. If
you assign the Picture ID using the remote control,
only displays with the same Picture ID and Set ID
can be controlled remotely.
2 To change the Picture ID, press the ON button,
or the left and right arrow buttons continuously.
Assign the ID you want.
Picture ID
◀
Off
▶
Close
AUDIO
(RGB/DVI)
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C IN
REMOTE
CONTROL IN
RS-232C IN
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
REMOTE
CONTROL IN
IR Receiver
If you assign the Set ID to each set with
yy
multi-vision, and then assign the Picture ID
using the red button on the remote control,
the key command is displayed for the set
with the same Set ID and Picture ID. A set
with different Set IDs and Picture IDs cannot
be controlled by IR signals.
The maximum value of the Picture ID can be
yy
set in the Total Set ID menu.
Please refer to the Installation Manual for
yy
more information on Total Set ID assignment.
Picture ID
◄
Off
►
Close
NOTE
2X2 Multi-Vision (Total Set ID: 4)
Set IDs are assigned as shown in the picture.
1Press the red ON button on the remote control
to assign the Picture ID.
For example, if the Picture ID is assigned to
yy
2, the upper right display (Set ID: 2) can be
controlled by IR signals.
For each set, you can change the settings
yy
for the PICTURE, AUDIO, TIME, NETWORK
and MY MEDIA menus or the hot keys on the
remote control.
If you press the green OFF button for Picture
yy
IDs, the Picture IDs for all sets are turned off.
If you then press any button on the remote
control, all sets will start working again.
Picture ID will be disabled while using the
yy
MY MEDIA menu.
If Picture ID is set to Off, holding buttons
yy
on the remote control will execute only one
action at a time.
CUSTOMIZING SETTINGS
NETWORK Settings
NETWORK
Move
1Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NETWORK and
press OK.
• Network Setting
: None
• Network Status
: Not connected
• Server IP Setting
• Server IP Status
: Not connected
3 Press the navigation buttons to scroll to the setting or option
you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Setting
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Network Setting
Configure the network settings.
Network Status
Display the network status.
- Internet is connected : Extermally connected
- Network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting
Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
OK
ꔋ
ENG
ENGLISH
• Player Name Setting
53
54
MAKING CONNECTIONS
MAKING CONNECTIONS
ENGLISH
ENG
Connect various external devices to the ports on the monitor set’s back panel.
1 Find an external device you want to connect to your monitor set shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI
DVI
AV
Component
DVD
VCR
HDMI
DVI
AV
Component
AV
Component
Speaker
USB
Memory storage PC
HDMI
DVI
RGB
LAN
Display Port
Camcorder/Camera
HDMI
DVI
AV
Component
Gaming device
HDMI
AV
Component
NOTE
If you connect a gaming device to the monitor set, use the cable supplied with the gaming device.
yy
47WV50BS is not supporting composite(AV) signal & input.
yy
MAKING CONNECTIONS
55
HDMI Connection
Connect a HD receiver, DVD, or VCR player to the
monitor set and select an appropriate input mode.
Transmits the digital video and audio signals from
an external device to the monitor set. Connect the
external device and the monitor set with the HDMI
cable as shown on the following illustration.
Back of the product.
DVI Connection
DVI IN
RGB
/COMPONENT OUT
Transmits the digital video signal from an external
device to the monitor set. Connect the external
device and the monitor set with the DVI cable as
shown in the following illustration. To transmit an
audio signal, connect an optional audio cable.
AUDIO
IN
/DVI
RGB
/COMPONENT IN
REMOTE
CONTROL IN
Back of the product.
DVI IN
RGB
/COMPONENT OUT
AUDIO
IN
(not included)
/DVI
RGB
/COMPONENT IN
REMOTE
CONTROL IN
(not included)
NOTE
Use a High Speed HDMI®/TM Cable.
yy
High Speed HDMI®/TM Cables are tested to
yy
carry an HD signal up to 1080p and higher.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
ENG
ENGLISH
External Device Connection
56
MAKING CONNECTIONS
ENGLISH
ENG
Component Connection
AV(CVBS) Connection
Transmits the analog video and audio signals from
an external device to the monitor set. Connect
the external device and the monitor set with the
RGB-Component cable as shown in the following
illustration.
Transmits the analog video and audio signals from
an external device to the monitor set. Connect
the external device and the monitor set with
the composite cable as shown in the following
illustration.
Back of the product.
RGB
/COMPONENT OUT
Back of the product.
RGB
/COMPONENT OUT
AUDIO
IN
AUDIO
IN
COMPOSITE
COMPOSITE
AUDIO
AUDIO
IN
IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
REMOTE
REMOTE
REMOTE
CONTROL IN
CONTROL IN
(not included)
CONTROL IN
REMOTE
CONTROL IN
(not included)
(not included)
(not included)
VIDEO OUT
VIDEO OUT
NOTE
When connecting to the component port
yy
using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
NOTE
If input signals are received through the AV
yy
cable, multiple monitors cannot be connected
via the RGB OUT port.
Input signal may be degraded or lost when
yy
multiple monitors are connected.
For component, in general, up to 3 monitors
yy
can be connected via the Component Out
port (RGB Shared) if the signal is stable and
there is no cable loss.
If you want to connect more than this number
yy
of monitors, we recommended that you use a
distributor.
47WV50BS is not supporting composite(AV)
yy
signal & input.
MAKING CONNECTIONS
Connecting to the LAN
PC
Network
or
B Using the Internet.
LAN
Monitor Set
Network
PC
ENG
ENGLISH
Switch
Monitor Set
Connecting to a USB
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player, or
a USB memory card reader to the monitor set and
access the USB menu to use various multimedia
files.
A Using a router (Switch)
LAN
57
58
MAKING CONNECTIONS
Daisy Chain Monitors
ENGLISH
ENG
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
• To use different products connected to each other Connect one end of the signal input cable (15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products.
RGB Cable
15-pin D-Sub Signal Cable
(Max 3m)
(not included)
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
RGB
/COMPONENT IN
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
RGB
/COMPONENT IN
Monitor Set 1
Monitor Set 2
DVI
DVI
IN IN
DVI DVI
IN IN
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
RGB
/COMPONENT IN
Monitor Set 3
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
RGB
/COMPONENT IN
Monitor Set 4
DVI Cable
OUT
DVIDVI
OUT
DVI OUT
DVI OUT
DVI INDVI IN
DVI OUT
DVI OUT
DVI IN DVI IN
DVI Cable
(Max 3m)
Monitor Set 1
Monitor Set 2
Monitor Set 3
Monitor Set 4
NOTE
When multiple monitors are connected in RGB input, it is recommended to use a distributor to avoid
yy
signal degradation and cable loss.
For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended
yy
resolution) if the signal is stable and there is no cable loss. If you want to connect more than this
number of monitors, we recommended that you use a distributor.
When the tile mode is configured via DVI cables, only the monitor that receives first signals can play
yy
HDCP-encrypted content. (The DVI Out port does not support HDCP.)
If the signal cable between the product and your PC is too long, make sure to use the DVI (RGB)
yy
booster or DVI (RGB) optical cable.
If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via
yy
the DVI Out port.
TROUBLESHOOTING
59
No image is displayed
Problem
Is the product power cord
connected?
Power is on, but the screen
appears extremely dark.
Does the 'Invalid Format'
message appear?
oes the 'No signal' message
D
appear?
Resolution
yy See if the power cord is properly connected to the outlet.
yy Adjust brightness and contrast again.
yy Backlight may need repair.
yy The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
yy The signal cable between PC and product is not connected. Check
the signal cable.
yy Press the 'INPUT' menu in the remote Control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
yy See if the plug&play function is supported by referring to the video
card user manual.
The screen image looks abnormal.
Problem
Is the screen position wrong?
Resolution
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
yy See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
yy D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the yy D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
The screen is displayed
yy The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
ENG
ENGLISH
TROUBLESHOOTING
60
TROUBLESHOOTING
After-image appears on the product.
ENGLISH
ENG
Problem
After-image appears when the
product is turned off.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
The audio function does not work.
Problem
No sound?
Sound is too dull.
Sound is too low.
Resolution
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Select the appropriate equalize sound.
yy Adjust the volume.
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
creen color is unstable or
S
mono-colored.
yy Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
yy Several pixels (red, green, white, or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Resolution
yy Is the sleep timer set?
yy Check the power control settings. Power interrupted.
NOTE
The software version can be updated for improvement in performance. Customer needs to ensure
yy
the compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and
upload revised software version to the product according to the guidance provided by LGE.
TROUBLESHOOTING
61
CAUTION
Recommended operating conditions
1
Change the background and the character
colors using the same time interval.
ID : UPM123
PW:****
2 Change the image using the same time interval.
ID : UPM123
PW:****
When changing colors, using complementary
colors helps to prevent image sticking.
Make sure that the characters or images
before changing the image remain in the same
location after changing the image.
What is image sticking?
Glass
BM
CF
BM
CF
BM
CF
OC
PI
LC
PI
TFT Layers
Glass
ITO or MoTi Pixel Layer
I D : UPM123
PW : ******
I D : UPM123
PW : ******
CF
When the LCD panel displays a static image
for an extended period of time, it can cause a
voltage difference between the electrodes that
operate the liquid crystals. When the voltage
difference between the electrodes builds up
over time, liquid crystals have a tendency to
remain aligned in one direction. During this
process, a previously displayed image remains
visible. This phenomenon is referred to as
image sticking.
ENG
ENGLISH
Image sticking does not occur when using constantly changing images but may occur when using
yy
a fixed image for an extended period of time. Therefore, it is recommended that you use the
instructions below to decrease the likelihood of image sticking occurring when using a fixed image.
It is recommended that you change the screen at least once every 12 hours at the very minimum; if
done more frequently, the prevention of image sticking is more effective.
62
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
LCD Panel
Video Signal
Screen Type
119 cm Wide TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 119 cm
Pixel Pitch
0.5415 mm (H) x 0.5415 mm (V)
Max. Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
RGB : 30 kHz to 83 kHz
HDMI/DVI/DP : 30 kHz to 83 kHz
Vertical Frequency
RGB : 50 Hz to 75 Hz
HDMI/DVI/DP : 56 Hz to 60 Hz
Synchronization Type
Separate Sync, Composite(AV) Sync, Digital, SOG
(*47WV50BS is not supporting Composite(AV) signal and input.)
Input Connector
Power
15-pin D-Sub type (RGB / Component ), HDMI/DVI/DP(digital),
Composite(AV), RS-232C, LAN, USB
(*47WV50BS is not supporting Composite(AV) signal and input.)
Power Rating
47WV50BR / 47WV50BS
AC 100-240 V~, 50 / 60 Hz 1.5 A
47WV50MS
AC 100-240 V~, 50 / 60 Hz 1.8 A
Power Consumption
47WV50BR
47WV50BS
On Mode : 150 W Typ. 190 W Max
Smart Energy Saving Mode : 80 W Typ.
Off Mode : ≤ 0.5 W
Sleep Mode : ≤ 0.7 W
47WV50MS
On Mode : 160 W Typ. 200 W Max
Smart Energy Saving Mode : 90 W Typ.
Off Mode : ≤ 0.5 W
Sleep Mode : ≤ 0.7 W
Dimensions
(Width x Height x
Depth) / Weight
* Wall Bracket available VESA
600 x 400
H
W
D
47WV50BR / 47WV50BS
1044.9 mm X 590.0 mm X 89.9 mm / 18.5 Kg
47WV50MS
1044.9 mm X 590.0 mm X 89.9 mm / 18.7 Kg
Embedded battery
Operating Temperature
Environmental
Operating Humidity
conditions
Storage Temperature
Storage Humidity
Applied
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
SPECIFICATIONS
63
Audio
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
ENG
ENGLISH
* Applicable only for models that support the speakers
64
SPECIFICATIONS
DTV Mode
RGB (PC) supported mode
ENGLISH
ENG
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Resolution
Component
HDMI/DVI (DTV)
640 x 480
31.469
59.94
480i
o
x
o
x
640 x 480
37.5
75
576i
720 x 400
31.468
70.8
480p
o
o
o
o
800 x 600
37.879
60.317
576p
800 x 600
46.875
75
720p
o
o
1080i
o
o
1080p
o
o
832 x 624
49.725
74.55
1024 x 768
48.363
60
1024 x 768
60.123
75.029
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1280 x 1024
79.98
75.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
NOTE
HDMI/DVI/Display Port(PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
When the cable is connected to the DVI,
yy
HDMI or the Display Port, you can select the
PC/DTV mode optionally. It is recommended
you to set to the PC mode when connecting
to PC; the DTV mode when connecting to
DTV.
NOTE
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
IR CODES
65
IR CODES
ENG
ENGLISH
All models do not support the HDMI/USB function.
yy
Some key codes are not supported depending on the model.
yy
Code (Hexa)
08
Function
Note
R/C BUTTON
Power
0B
INPUT
R/C BUTTON
C4
MONITOR ON
R/C BUTTON
C5
MONITOR OFF
95
ENERGY SAVING (
DC
3D
R/C BUTTON
10 to 19
Number Key 0 to 9
R/C BUTTON
32
1/a/A
R/C BUTTON
2F
CLEAR
R/C BUTTON
02
Volume
R/C BUTTON
03
Volume
R/C BUTTON
79
ARC
R/C BUTTON
99
AUTO
R/C BUTTON
09
MUTE
E0
BRIGHTNESS
(Page UP)
R/C BUTTON
E1
BRIGHTNESS
(Page Down)
R/C BUTTON
4D
PSM
R/C BUTTON
AA
INFO ⓘ
R/C BUTTON
5F
W.BAL
R/C BUTTON
43
SETTINGS
R/C BUTTON
40
Up ▲
R/C BUTTON
41
Down ▼
R/C BUTTON
07
Left ◄
R/C BUTTON
06
Right ►
R/C BUTTON
3F
S.MENU
R/C BUTTON
44
OK
R/C BUTTON
28
BACK
R/C BUTTON
5B
EXIT
R/C BUTTON
R/C BUTTON
)
R/C BUTTON
7E
7B
R/C BUTTON
R/C BUTTON
TILE
R/C BUTTON
B1
R/C BUTTON
B0
R/C BUTTON
BA
R/C BUTTON
8F
R/C BUTTON
8E
R/C BUTTON
72
Red Key (PICTURE ID ON)
71
Green Key (PICTURE ID OFF) R/C BUTTON
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
66
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at one
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
yy
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
PC
Monitor Set 1
RS-232C Configurations
8-Wire Configurations (Cross-over RS-232C cable)
PC
DCD
RXD
TXD
GND
DTR
DSR
RTS
CTS
1
2
3
5
4
6
7
8
D-Sub 9
(Female)
Set
1
3
2
5
6
4
8
7
DCD
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 BPS
yy
Data Length : 8 bit
yy
Parity Bit : None
yy
Stop Bit : 1 bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
Monitor Set 2
Monitor Set 3
Monitor Set 4
NOTE
When using 3-wire connections (nonyy
standard), an IR daisy chain cannot be used.
CONTROLLING THE MULTIPLE PRODUCT
67
Command Reference List
DATA
(Hexadecimal)
2
01. Power
k
a
00 to 01
02. Input Select
x
b
Refer to ‘Input Select.’
03. Aspect Ratio
k
c
Refer to ‘Aspect Ratio.’
04. Energy Saving
j
q
Refer to ‘Energy Saving.’
05. Picture mode
d
x
Refer to ‘Picture mode.’
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Sharpness
k
k
00 to 64
09. Color
k
i
00 to 64
10. Tint
k
j
00 to 64
11. Color Temperature
x
u
00 to 64
12. H Position
f
q
00 to 64
13. V Position
f
r
00 to 64
14. H Size
f
s
00 to 64
15. Auto configuration
j
u
01
16. Balance
k
t
00 to 64
17. Sound mode
d
y
Refer to ‘Sound mode.’
18. Treble
k
r
00 to 64
19. Bass
k
s
00 to 64
20. Speaker
d
v
00 to 01
21. Volume Mute
k
e
00 to 01
22. Volume Control
k
f
00 to 64
23. Time 1(Years/ Months/ Days)
f
a
Refer to ‘Time 1.’
24. Time 2(Hours/ Minutes/Seconds)
f
x
Refer to ‘Time 2.’
25. Off Timer(Repeat mode/ Time)
f
e
Refer to ‘Off Timer.’
26. On Timer(Repeat Mode/ Time)
f
d
Refer to ‘On Timer.’
27. On Timer Input
f
u
Refer to ‘On Timer Input.’
28. Sleep Time
f
f
00 to 08
29. Power On Delay
f
h
00 to 64
30. Automatic Standby
m
n
00 to 01
31. Auto Off
f
g
00 to 01
32. Language
f
i
Refer to ‘Language.’
33. Power Indicator(Standby Light)
f
o
00 to 01
34. Power Indicator(Power Light)
f
p
00 to 01
35. ISM mode
j
p
Refer to ‘ISM Method.’
36. Fail Over Select
m
i
00 to 02
37. Fail Over Input Select
m
j
Refer to ‘Fail Over Input Select.’
38. Reset
f
k
00 to 02
ENG
ENGLISH
COMMAND
1
68
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
COMMAND
DATA
(Hexadecimal)
1
2
39. Tile Mode
d
d
00 to 01
40. Tile Mode Check
d
z
FF
41. Tile ID
d
i
Refer to ‘Tile ID.’
42. Tile H Position
d
e
00 to 32
43. Tile V Position
d
f
00 to 32
44. Tile H Size
d
g
00 to 32
45. Tile V Size
d
h
00 to 32
46. Natural Mode (In Tile mode)
d
j
00 to 01
47. DPM Select
f
j
00 to 01
48. FAN Control
d
o
00 to 03
49. FAN Fault Check
d
w
FF
50. Temperature Value
d
n
FF
51. Remote Lock/ key Lock
k
m
00 to 01
52. Key
m
c
Refer to ‘Key.’
53. OSD Select
k
l
00 to 01
54. Elapsed time return
d
l
FF
55. Serial No. Check
f
y
FF
56. S/W Version
f
z
FF
57. White Balance Red Gain
j
m
00 to FE
58. White Balance Green Gain
j
n
00 to FE
59. White Balance Blue Gain
j
o
00 to FE
60. Backlight
m
g
00 to 64
61. PC Power Control
d
t
00 to 01
62. PC Power
d
s
00 to 01
63. Easy Brightness Control Mode
m
s
v
00 to 01
65. Status check
s
s
s
66. BLU Maintenance
m
t
00 to 01
67. Screen mute
k
s
d
d
00 to 01
64. Easy Brightness Control Schedule
68. Daylight Saving
Refer to ‘Easy Brightness Control Schedule.’
Refer to ‘Status check.’
Refer to ‘Daylight Saving.’
Note : During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c)
yy
are not executed and treated as NG.
Some commands are not supported depending on the model.
yy
The ‘f f’ command which shows the status of a certain command does not display the OSD as the
yy
result in order to be compatible with SuperSign program.
CONTROLLING THE MULTIPLE PRODUCT
69
Transmission / Receiving Protocol
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: S
et ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0x0D’.
* [ ]: ASCII code space ‘0x20’
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* When the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is
in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the
data that is sent from the PC.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and they do send any
acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
* Some commands are not supported depending on the model.
ENG
ENGLISH
Transmission
70
CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
To control the Power On/Off the display.
ENGLISH
ENG
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Only when the monitor set is fully powered on, the
Acknowledgement signal is returned properly.
* There may be a certain time of delay between the
Transmission and Acknowledgement signals.
04. Energy Saving (Command: j q)
To set the Energy Saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03. Maximum
04: Auto
05. Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
02. Input Select (Command: x b)
To select the Input Source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: Input (AV)
40: Component
60: RGB
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(HDMI1)(DTV)
A0: HDMI(HDMI1)(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
91: HDMI2/SDI(DTV)
A1: HDMI2/SDI(PC)
B0: SuperSign
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
05. Picture Mode (Command: d x)
To select the Picture Mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported
depending on the model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
02: 16:9
04: Zoom
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
09: Just scan (720p or more)
(Component, HDMI/ DVI-D/ Display Port DTV)
* RGB, DVI-D, HDMI/Display Port PC mode (1:1)
10 to 1F: Cinema Zoom 1 to 16
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
* Available data types differ depending on the input
signal. For more information, see the aspect ratio
section of the owner's manual.
* The aspect ratio may differ depending on the
model's input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
07. Brightness (Command: k h)
To adjust the screen brightness.
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
To adjust the screen sharpness.
* This function is available only in AV/Component
input.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust the screen color.
* This function is available only in AV/Component
input.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
To adjust the screen tint.
* This function is available only in AV/Component
input.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint R50 to G50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
To adjust the screen Color Temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
12. H Position (Command: f q)
To adjust the screen Horizontal Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. -50 (Left) to max. 50 (Right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
71
72
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
13. V Position (Command: f r)
To adjust the screen Vertical Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
16. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to 64: min. -50 (Bottom) to max. 50 (Top)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
14. H Size (Command: f s)
To adjust the screen Horizontal Size.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data 00 - 64: Min. -50 (Reduce) - Max. 50 (Expand)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Auto Configuration (Command: j u)
To adjust the picture position and minimize image
shaking automatically.
(Only available for RGB-PC input.)
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
To select the Sound Mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sport
05. Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
To adjust the Treble values.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
19. Bass (Command: k s)
To adjust the Bass values.
Data 00 to 64: Bass 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
To select the speaker on/off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
22. Volume Control (Command: k f)
To set the playback volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
23. Time 1(Year/ Month/ Day) (Command: f a)
To set the Time 1(Year/ Month/ Day) values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 100 to 14: 2010 to 2030
Data 201 to 0C: January to December
Data 301 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1(Year/
Month/ Day) values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
21. Volume Mute (Command: k e)
To control the Volume Mute on/off.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Mute (Volume Off)
01 : Current volume (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
24. Time 2(Hour/ Minute/ Second) (Command: f x)
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 17: 00 to 23 hours
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2(Hour/
Minute/ Second) values.
** This command won’t work if Time 1(Year/ Month/
Day) has not been set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENG
ENGLISH
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
73
74
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
25. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat Mode/ Time) function.
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st Off Time data
F2: Read the 2nd Off Time data
F3: Read the 3rd Off Time data
F4: Read the 4th Off Time data
F5: Read the 5th Off Time data
F6: Read the 6th Off Time data
F7: Read the 7th Off Time data
2. E1-E7 (Delete one index), E0 (Delete all indexes)
E0: Delete all Off Time data
E1: Delete the 1st Off Time data
E2: Delete the 2nd Off Time data
E3: Delete the 3rd Off Time data
E4: Delete the 4th Off Time data
E5: Delete the 5th Off Time data
E6: Delete the 6th Off Time data
E7: Delete the 7th Off Time data
3. 01 to 0C (Set the day of week for Off Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fe 01 f1 ff ff - Read the 1st Off Time
data.)
(Example 2: fe 01 e1 ff ff - Delete the 1st Off Time
data.)
(Example 3: fe 01 04 02 03 - Set the Off Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st On Time data
F2: Read the 2nd On Time data
F3: Read the 3rd On Time data
F4: Read the 4th On Time data
F5: Read the 5th On Time data
F6: Read the 6th On Time data
F7: Read the 7th On Time data
2. E1-E7 (Delete one index), E0 (Delete all indexes)
E0: Delete all On Time data
E1: Delete the 1st On Time data
E2: Delete the 2nd On Time data
E3: Delete the 3rd On Time data
E4: Delete the 4th On Time data
E5: Delete the 5th On Time data
E6: Delete the 6th On Time data
E7: Delete the 7th On Time data
3. 01 to 0C (Set the day of week for On Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fd 01 f1 ff ff - Read the 1st On Time
data.)
(Example 2: fd 01 e1 ff ff - Delete the 1st On Time
data.)
(Example 3: fd 01 04 02 03 - Set the On Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
Data (Add schedule)
20: Input (AV)
40: Component
60. RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
Data1 (Change schedule)
1. F1 to F7 (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component
60: RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
* To read the schedule input, enter FFH for [Data2].
If no schedule is available for [Data1] when
attempting to read or change the schedule data, the
text NG will be displayed and the operation fails.
(Example 1: fu 01 60 - Move each schedule input
down one row and save the 1st schedule input in
RGB mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule
input.)
(Example 3: fu 01 f3 20 - Change the 3rd data
schedule input to the current On Time and AV input.
If there is no third schedule, the text NG will be
displayed and the operation fails.)
* This function is supported only when 1 (Year/
Month/Day), 2 (Hour/Minute/Second), On Time
(Repeat Mode/Time) are set.
** It may not be supported depending on the model.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
28. Sleep Time (Command: f f)
To set the Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00: Off (Sleep Timer off)
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on. (Unit: Second)
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to max. 100 (sec.)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
30. Automatic Standby (Command: m n)
To set the Automatic Standby function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 4 hours)
01: 4 Hours (Off after 4 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
27. On Timer Input (Command: f u)
To select an external input for the current On Time
setting and add a new schedule or change the
existing schedule.
75
76
CONTROLLING THE MULTIPLE PRODUCT
31. Auto Off (Command: f g)
To set the Auto Off function.
ENGLISH
ENG
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 15 minutes)
01: 15 min.(Off after 15 minutes)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
To set the language for OSD.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish (EU)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese (Cantonese)
34. Power Indicator (Power Light) (Command: f p)
To set the Power Indicator (Power Light) function.
Transmission
[f][p][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
35. ISM mode (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08. Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
33. Power Indicator (Standby Light) (Command: f o)
To set the Power Indicator (Standby Light) function.
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
36. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[ ][Data4][ ][Data5][Cr]
Data 1 to 5 (Priority 1 to 5)
60: RGB
70: DVI-D
90: HDMI(HDMI1)
C0: Display Port
91: HDMI2/SDI
* The number of data items differs depending on the
model.
40. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Check Tile Mode status.
** It may not be supported depending on the model.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
Data2
Data3
00: Tile Mode Off
01: Tile Mode On
00 to 0F: Tile Row
00 to 0F: Tile Column
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[ ][Data5][x]
41. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
38. Reset (Command: f k)
To execute the Picture, Screen, Audio and Factory
reset function.
(Screen Reset can only be performed in RGB input
mode.)
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile
Row).
** It may not be supported depending on the model.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
*NG will be return if data is over (Tile Column) x (Tile
Row), except 0xFF.
00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
42. Tile H Position (Command: d e)
To adjust the Tile Horizontal position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
39. Tile Mode (Command: d d)
To set a Tile Mode and Tile Column/ Row values.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: 1st byte - Tile Row
2nd byte - Tile Column
*00, 01, 10, 11 means Tile Mode Off
** It may not be supported depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 32: -50 (Left) to 0 (Right)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
37. Fail Over Input Select (Command: m j)
To select the input source for auto switch.
* This command is only available when the fail over
(auto) mode is set to Custom.
77
78
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
43. Tile V Position (Command: d f)
To adjust the Tile Vertical position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 0 to 32: 0 (Bottom) to 50 (Top)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
44. Tile H Size (Command: d g)
To adjust the Tile Horizontal Size.
*Set Tile H Position to 0x32 before setting Tile H
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
46. Natural Mode (In Tile Mode) (Command : d j)
To display the image naturally, the part of the image
that would normally be displayed in the gap between
the monitors is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
47. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
* Data settings may vary depending on your model
as below.
Data 00: Off
01: 5 sec.
02: 10 sec.
03: 15 sec.
04: 1 min.
05: 3 min.
06: 5 min.
07: 10 min.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Tile V Size (Command: d h)
To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
48. FAN Control (Command : d o)
To set the Fan mode.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
03: Off
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
49. FAN Fault Check (Command: d w)
To check the fan errors.
Data FF: Read the status
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Fan fault
01: Fan OK
02: Model without a Fan
50. Temperature Value (Command: d n)
To check the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
52. Key (Command: m c)
To send a key code of the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
DataIR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For a key code, see the IR Code.
* Some key codes are not supported depending on
the model.
53. OSD Select (Command: k l)
To select OSD(On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed in hexadecimal.
51. Remote Controller Lock/ Key Lock
(Command: k m)
When the remote control and front keys are locked in
standby mode, the power cannot be turned on using
the remote control or front power button.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01: On (Lock On)
* Display will not be turned on by power on key of
remote controller and front panel control keys, if key
is locked on in standby mode.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
54. Elapsed time return (Command: d l)
To check the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
ENG
ENGLISH
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
79
80
CONTROLLING THE MULTIPLE PRODUCT
55. Serial No.Check (Command: f y)
To check the Serial Numbers.
ENGLISH
ENG
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check the product Serial Number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
56. S/W Version (Command: f z)
To check the Software Version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check the Software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
58. White Balance Green Gain (Command: j n)
To set the White Balance Green Gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green Gain 0 to 254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Using the remote control, you can adjust the value
from 0 to 255. With RS-232C, you can adjust the
value from 0 to 254.
59. White Balance Blue Gain (Command: j o)
To set the White Balance Blue Gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue Gain 0 to 254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
* Using the remote control, you can adjust the value
from 0 to 255. With RS-232C, you can adjust the
value from 0 to 254.
57. White Balance Red Gain (Command: j m)
To set the White Balance Red Gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red Gain 0 to 254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
* Using the remote control, you can adjust the value
from 0 to 255. With RS-232C, you can adjust the
value from 0 to 254.
60. Backlight (Command: m g)
To adjust the screen backlight.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
** It may not be supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
Data
00: Synchronized (When the monitor is off, the PC is
also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
02: Maintain the power-on state of the PC. (When
you turn on the monitor while the Media Player is
turned off, the Media Player is turned on.)
** It may not be supported depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
62. PC Power (Command: d s)
Control the PC power.
Transmission
[d][s][ ][Set ID][ ][Data][Cr]
Data 00: PC is turned off.
01: PC is turned on.
** It may not be supported depending on the model.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
64. Easy Brightness Control Schedule (Command: s
s)
Sets the Easy Brightness Control Schedule.
Transmission
[s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 - F6 (Data Reading Functions)
F1: Reads the data of the 1st Easy Brightness
Control
F2: Reads the data of the 2nd Easy Brightness
Control
F3: Reads the data of the 3rd Easy Brightness
Control
F4: Reads the data of the 4th Easy Brightness
Control
F5: Reads the data of the 5th Easy Brightness
Control
F6: Reads the data of the 6th Easy Brightness
Control
2. E1-E6 (Deletes One Index), E0 (Delete All
Indexes)
E0: Deletes all Easy Brightness Controls
E1: Deletes the 1st Easy Brightness Control
E2: Deletes the 2nd Easy Brightness Control
E3: Deletes the 3rd Easy Brightness Control
E4: Deletes the 4th Easy Brightness Control
E5: Deletes the 5th Easy Brightness Control
E6: Deletes the 6th Easy Brightness Control
3. 00-17: 00 - 23:00
Data2 00-3B: 00 - 59 minutes
Data3 00-64: backlight 0 - 100
* To read or delete the configured Easy Brightness
Control list, set [Data2][Data3] to FF.
(ex1: ss 01 f1 ff ff - Reads the 1st index data from the
Easy Brightness Control.
ex2: ss 01 e1 ff ff - Deletes the 1st index data from
the Easy Brightness Control.
ex3: ss 01 07 1E 46 - Adds a schedule to the
backlight 70 at 07:30.)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
** It may not be supported, depending on the model.
63. Easy Brightness Control Mode (Command: s m)
Selects ON/OFF of Easy Brightness Control Mode.
Transmission
[s][m][ ][Set ID][ ][Data][Cr]
Data 00: Easy Brightness Control OFF
01: Easy Brightness Control ON
* It does not work if the current time is not set up.
** It may not be supported, depending on the model.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
61. PC Power Control (Command: d t)
To control the PC power if the PC and the monitor
are synchronized.
81
82
CONTROLLING THE MULTIPLE PRODUCT
65. Status check (Command: s v)
Check various statuses.
ENGLISH
ENG
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data 05: Check the normal operation of No.1 and
No.2 luminance sensors.
06: luminance sensor being used:
07: Check the normal operation of top, bottom,
or main temperature sensors.
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
When the Data is 05
Data100: All normal
01: BLU sensor 1 normal, BLU sensor 2 fail
02: BLU sensor 1 fail, BLU sensor 2 normal
03: All fail
When the Data is 06
Data100: No.1 luminance sensor is being used
01: No.2 luminance sensor is being used
When the Data is 07
Data100: All temperature sensors fail
01: Top normal, Bottom fail, Main fail
02: Top fail, Bottom normal, Main fail
03: Top normal, Bottom normal, Main fail
04: Top fail, Bottom fail, Main normal
05: Top normal, Bottom fail, Main fail
06: Top fail, Bottom normal, Main fail
07: All temperature sensors normal
66. BLU Maintenance (Command: m t)
Select ON/OFF of BLU Maintenance.
Transmission
[m][t][ ][Set ID][ ][Data][Cr]
Data 00: BLU Maintenance OFF
01: BLU Maintenance ON
** It may not be supported, depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
67. Screen mute (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Turns the screen on.
01: Turns the screen off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
When the Data is 08
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][Data3][x]
Data1: Temperature of the top sensor area when the
set is powered off.
Data2: Temperature of the bottom sensor area when
the set is powered off.
Data3: Temperature of the main sensor area when
the set is powered off.
When the Data is 09
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][x]
Data1 00-ff: Upper 2-byte of Fan Speed
Data2 00-ff: Lower 2-byte of Fan Speed
Fan Speed: Hex 0-20D0, Decimal 0-8400
** It may not be supported, depending on the model.
68. Daylight Saving (Command: s d)
To set the Daylight saving function.
Transmission
[s][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4]
[ ][Data5][Cr]
Data 00: Off (Data2~5: FFH)
01: Start Time
02: End Time
Data2 01~0C: January to December
Data3 01~06: 1 ~ 6th week
* The maximum number of [Data3] differs depending
on Date.
Data4 00~06 ( Sun. ~ Sat. )
Data5 00~17: 00 ~ 23 hours
* To read the Start Time/End Time, enter FFH for
[Data2]~[Data5].
(ex1: sd 01 01 ff ff ff ff - To check the Start Time
ex2: sd 01 02 ff ff ff ff - To check the End Time)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4]
[Data5][x]
** It may not be supported depending on the model.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual (CD) in an
accessible place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
ENERGY STAR® is a set of power-saving guidelines issued by
the U.S.Environmental Protection Agency (EPA).
As an ENERGY STAR® Partner LGE U. S. A.,
Inc. has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
Refer to ENERGYSTAR.gov for more information
on the ENERGY STAR® program.
Temporary noise is normal when powering ON or
OFF this device.
Download PDF

advertising