LG | 49MS75A-5B | LG 49MS75A Owner’s Manual

OWNER’S MANUAL
MONITOR
SIGNAGE
Please read this manual carefully before operating the your set and retain it
for future reference.
49MS75A
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3LICENSES
4
ASSEMBLY AND PREPARATION
4Accessories
5
Optional Accessories
7
Parts and Buttons
8
Connecting the Stand
9
Connecting the Speakers
10
Connecting IR & Light Sensor
10
Portrait Layout
11
Connecting the OPS
13
Installing on a Wall
15
REMOTE CONTROL
17
MAKING CONNECTIONS
17
18
20
21
Connecting to a PC
External Device Connection
Daisy Chain Monitors
- Using the Multi Display Mode
Function
Using the Input List
22
22ENTERTAINMENT
22
Using My Media
22
- Connecting USB Storage Devices
24
- Files Supported by My Media
27
- Viewing Videos
29
- Viewing Photos
29
- Listening to Music
30 -Settings
31
SuperSign Contents
31Information
31
File Manager
31
32
Using Mirror Scene
PICTURE ID Settings
33
USER SETTINGS
33
33
34
38
39
41
Main Menu Settings
- Quick Settings
- Picture Settings
- Sound Settings
- Network Settings
- General Settings
43TROUBLESHOOTING
45
PRODUCT SPECIFICATIONS
49
IR CODES
51
TO CONTROL MULTIPLE
PRODUCTS
51
51
51
52
54
Connecting the Cable
RS-232C Configurations
Communication Parameter
Command Reference List
Transmission/Reception Protocol
LICENSES
3
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX®
video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your
registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are
used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered
trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved.
NOTE
••The warranty will not cover any damage caused by using the product in an excessively dusty environment.
ENGLISH
LICENSES
4
ASSEMBLY AND PREPARATION
ENGLISH
ASSEMBLY AND PREPARATION
Accessories
Please check whether all the components are included in the box before using the product. If there are any missing
components, contact the retail store where you purchased the product. The illustrations in this manual may differ from
the actual product and accessories.
Remote Control,
Batteries (AAA) 2EA
Power Cord
IR & Light Sensor
CD (Owner’s Manual) / Card
HDMI Cable
Mounting Cable Tie
CAUTION
••Always use genuine components to ensure safety and product performance.
••The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
••The accessories provided with your product may vary depending on the model or region.
••Product specifications or contents in this manual may be changed without prior notice due to upgrade of
product functions.
••SuperSign Software & Manual
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software
for your model.
ASSEMBLY AND PREPARATION
5
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
Screws
Stand
ST-200T
Diameter 4.0 mm x Pitch 0.7 mm x
Length 10 mm (including spring washer)
Stand kit
Speakers
SP-2100
Cable Holders/
Cable Ties
Screws
Screws
Diameter 4.0 mm x Pitch
0.7 mm x Length 8 mm
(including spring washer)
Diameter 4.0 mm x Pitch
1.6 mm x Length 10 mm
Speaker kit
NOTE
••Cable holder/Cable tie may not be available in some areas or for some models.
••Optional accessories are available for some models. If necessary, please purchase them separately.
ENGLISH
Optional Accessories
6
ASSEMBLY AND PREPARATION
ENGLISH
KT-OPSA
Power Cord
Screws
Connecting
Cable
Card (Easy Setup Guide)
OPS kit
AN-WF500
Wi-Fi Dongle kit
KT-SP0
Pixel sensor kit
NOTE
•• Optional accessories are available for some models. If necessary, please purchase them separately.
•• Pixel sensor is sold separately. You can obtain additional accessories from your local retail store.
ASSEMBLY AND PREPARATION
7
ENGLISH
Parts and Buttons
Buttons
Connection
Panel
Buttons
Description
INPUT
Changes the input source.
MENU
Accesses the main menus, or saves your input and exits the menus.
Adjust the up and down.
Moves left and right.
AUTO/SET
/I
Displays the current signal and mode.
Turns the power on or off.
8
ASSEMBLY AND PREPARATION
ENGLISH
Connecting the Stand
- For certain models only.
- The image may be different according to the
model
1 Place a soft cloth on the table and place the
product with the screen facing downward.
2
Use the screws to secure the stand to the back
of the product as shown below.
ASSEMBLY AND PREPARATION
- For certain models only.
- The image may be different according to the
model.
1
Connect an input signal cable before installing
the speakers.
2
Mount the speakers by using screws as
shown below. Make sure the power cable is
disconnected before making a connection.
3
Connect the speaker cables noting the correct
polarity. Use cable holders and cable ties to
organize the speaker cables.
NOTE
••Please turn off the power before removing
the cable. Connecting or removing the
speaker cable while turned on may result in
no sound.
ENGLISH
Connecting the Speakers
9
10
ASSEMBLY AND PREPARATION
ENGLISH
Connecting IR & Light Sensor
When you connect the cable to the product, the
feature for receiving remote control signals is
activated. The IR & light sensor is magnetic. Attach
it to the front edge of the product for use.
[Front]
Using Kensington Lock
(This is not available for all models.)
The Kensington security system connector is
located at the back of the monitor. For more
information on installation and use of this system,
refer to the manual provided with the Kensington
security system or visit http://www.kensington.
com.
Connect the Kensington security system cable
between the monitor and a table.
PIXEL
SENSOR
___
3.3V --- 0.25mA
CAUTION
IR&LIGHT
SENSOR
CAUTION
NOTE
••The signal strength of the IR and Light sensor
will decrease if the sensor is not placed in
front of the product.
Portrait Layout
When installing in a portrait layout, rotate the
monitor counterclockwise 90 degrees (when facing
the screen).
NOTE
••The Kensington security system is optional. You
can obtain additional accessories from most
electronics retail stores.
ASSEMBLY AND PREPARATION
11
- For certain models only.
- The image may be different according to the
model.
1
3
Lay a clean cloth on the floor, put the monitor
on it with the screen facing downward,
and then remove the screws from the OPS
hole cover on the rear of the monitor with a
screwdriver.
Align the KT-OPSA along the four screw holes
on the rear of the set and attach it to the rear of
the set using the four screws provided.
KT-OPSA
4
OPS Hole Cover
2
Open the top cover of the KT-OPSA and
connect the cable provided to the connector
inside the set and the connector on the KTOPSA.
Lift the left side (round part) of the OPS hole
cover. Remove the cover.
Connector on the
Connector inside the set
KT-OPSA
ENGLISH
Connecting the OPS
12
ASSEMBLY AND PREPARATION
ENGLISH
5
Close the top cover of the KT-OPSA and tighten
it on the left and right with the two screws
provided.
6
Insert the OPS Player (sold separately) into
the bottom hole of the KT-OPSA and finish
the installation by tightening the two screws
provided on the bottom.
OPS Player
ASSEMBLY AND PREPARATION
CAUTION
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
10 cm
10 cm
10 cm
10 cm
••Disconnect the power cord before moving or
installing the monitor to avoid risk of electric
shock.
••If you install the monitor on a ceiling or slanted
wall, it may fall and result in injury. Use an
authorized LG wall mount and contact your
local dealer or qualified personnel to assist with
the installation.
••Do not over tighten the screws as this may
damage the monitor and void your warranty.
••Use only screws and wall mounting brackets
that meet the VESA standard. Any damage or
injuries caused by misuse or use of improper
accessories are not covered by the warranty.
••To prevent injury, this apparatus must be
securely attached to the wall in accordance
with the installation instructions. (This pertains
only to Australia and New Zealand.)
To install your monitor on a wall, attach a wall
mounting bracket (optional part) to the back of the
monitor.
Make sure that the wall mounting bracket is
securely fixed to the monitor and to the wall.
1
that conform to VESA standards.
2Screws which are longer than standard length
may damage the inside of the monitor.
3
NOTE
Use only screws and wall mounting brackets
A non-VESA standard screw may damage
the product and cause the monitor to fall. LG
Electronics is not liable for any accidents related
to the use of non-standard screws.
4
Please use VESA standard as below.
••785 mm and above
* Fixing screws: Diameter 6.0 mm x Pitch
1.0 mm x Length 12 mm
785 mm
••The wall mount kit includes the installation
guide and all necessary parts.
••The wall mounting bracket is optional. You can
obtain additional accessories from your local
dealer.
••The length of screws required may differ
depending on the wall mount. Be sure to use
the correct length.
••For more information, please refer to the guide
provided with the wall mount.
ENGLISH
Installing on a Wall
13
14
ASSEMBLY AND PREPARATION
ENGLISH
Securing the monitor to a wall (optional)
Procedure may differ depending on the model.
1
Insert and tighten the eyebolts, or brackets and
bolts on the back of the monitor.
- If there are already bolts inserted in the
eyebolts’ position, remove the other bolts first.
2
Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eyebolts on the rear of the monitor.
3
Connect the eyebolts and wall brackets tightly
with a sturdy cord.
Make sure the securing cord is horizontal with
the flat surface.
CAUTION
••Make sure that children do not climb on or
hang from the monitor.
NOTE
••Use a platform or cabinet that is large and
strong enough to support the monitor securely.
••Brackets, bolts, and cords are sold separately.
You can obtain additional accessories from your
local retail store.
••The illustration shows a general example of
installation and may look different from the
actual product.
WARNING
••If the monitor is not positioned in a
sufficiently stable location, there is a danger
that it will fall. Many injuries, particularly to
children, can be avoided by taking simple
precautions such as:
»»Using cabinets or stands recommended
by the manufacturer.
»»Only using furniture that can safely
support the monitor.
»»Ensuring the monitor is not overhanging
the edge of the supporting furniture.
»»Not placing the monitor on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the monitor to a suitable support.
»»Not placing cloth or other materials
between the monitor and supporting
furniture.
»»Educating children about the dangers
of climbing on furniture to reach the
monitor or its controls.
REMOTE CONTROL
15
The descriptions in this manual are based on the buttons on the remote control. Please read this manual
carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
labels inside the compartment, and close the battery cover.
and
terminals to the
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual
accessories.
CAUTION
••Do not mix old and new batteries, as this may
damage the remote control.
••Be sure to point the remote control toward the
remote control sensor on the monitor.
(POWER) Turns the monitor on or off.
MONITOR ON Turns the monitor on.
MONITOR OFF Turns the monitor off.
ENERGY SAVING( ) A
djusts the brightness of the picture to reduce
energy consumption.
INPUT Selects the input mode.
3D This model does not support this.
1/a/A Button T oggles between numerical and alphabetical.
(Depending upon the model, this feature may not be
supported.)
Number and Alphabet buttons Enters numerical or alphabetical characters depending upon the setting.
(Depending upon the model, this feature may not be supported.)
CLEAR Deletes the entered numerical or alphabetical character.
(Depending upon the model, this feature may not be supported.)
Volume Up/Down Button Adjusts the volume.
ARC Selects the Aspect Ratio mode.
AUTO Automatically adjusts picture position and minimizes image
instability (available for RGB input only).(Depending upon the
model, this feature may not be supported.)
MUTE Mutes all sounds.
BRIGHTNESS Button Adjusts the brightness of the display. PAGE
Function is not supported in the this model.
(Depending upon the model, this feature may not be
supported.)
ENGLISH
REMOTE CONTROL
16
REMOTE CONTROL
ENGLISH
PSM Selects the Picture Mode.
HOME Activates the Launcher.
W.BAL This model does not support this.
SETTINGS A
ccesses the main menus or saves your input and exit menus.
S.MENU S uperSign menu key (Depending upon the model, this feature
may not be supported.)
Navigation Buttons Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK A
llows you to move back one step in the user interaction function.
Exit Quit all OSD tasks and applications.
Allows you to control various multimedia devices to enjoy
multimedia simply by using the remote control through the
SimpLink menu. (Depending upon the model, this feature
may not be supported.)
TILE This model does not support this.
ID ON/OFF W
hen the Picture ID number matches the Set ID number,
you can control whichever monitor you want in multi-display
format.
USB Menu Control Buttons Controls media playback.
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the external
device you want to connect.
For more information about external device connections, see the user manual provided with each device.
Connecting to a PC
The illustrations may differ from the actual accessories. Some of the cables are not provided.
This monitor supports the Plug & Play* feature.
* Plug & Play: a feature that enables a PC to recognize devices attached by the user without device
configuration or user intervention when powering up.
(not included)
DP OUT
DVI OUT
(not included)
(not included)
___
3.3V --- 0.25mA
(not included)
DVI OUT
HDMI
(not included)
ENGLISH
MAKING CONNECTIONS
17
18
MAKING CONNECTIONS
ENGLISH
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
The illustrations may differ from the actual accessories. Some of the cables are not provided. For the best
picture and sound quality, connecting external devices to your monitor using HDMI cables is recommended.
ฒખ
OR
USB
(not included)
Direct Connection/
Using the Router/
Using the Internet
Network
(not included)
___
3.3V --- 0.25mA
HDMI
HD Receiver/DVD/VCR
Camcorder/Camera/Gaming Device
MAKING CONNECTIONS
19
••For the best image quality, using the monitor with HDMI connection is recommended.
••To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core,
such as a DVI cable.
••If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
••Sometimes red, green, or blue spots may appear on the screen. This is normal.
••Use a High Speed HDMI®/™ cable.
••If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to
manually change the default audio output to HDMI.
••If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
••You may experience compatibility issues if you use HDMI-PC mode.
••Make sure the power cable is disconnected.
••If you connect a gaming device to the monitor, use the cable provided with the gaming device.
••It is recommended to use the speakers that are provided as optional accessories.
••High Speed HDMI®/™ cables transmit a HD signal up to 1080p and higher.
••Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
••Recommended HDMI cable types
-High-Speed HDMI®/™ Cable
-High-Speed HDMI®/™ Cable with Ethernet
CAUTION
••Connect the signal input cable and tighten it by turning the screws clockwise.
••Do not press the screen with your finger for a prolonged period as this may result in
temporary distortion on the screen.
••Avoid displaying static images on the screen for a long period of time to prevent
image burn. Use a screensaver if possible.
••A wireless communication device near your monitor can affect the image.
ENGLISH
NOTE
20
MAKING CONNECTIONS
ENGLISH
Daisy Chain Monitors
To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the
DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product.
* DP Cable - Use a DP cable that is certified to DP1.1a (SST), DP1.2 (MST) or higher.
Monitor 1
Monitor 2
Monitor 3
Monitor 4
NOTE
••If the signal is stable and there is no cable loss, in general, up to 100 monitors can be connected via the DP
Out port (at the recommended resolution). If you want to connect more than this number of monitors, use
a distributor.
••If you set the tile mode using DVI or HDMI, you will not be able to watch HDCP-encrypted content.
••If the signal cable between the product and your PC is too long, make sure to use a booster or optical cable.
MAKING CONNECTIONS
21
The Multi Display Mode function displays a video signal received from DP In either in single mode (SST: Single
Stream Transport) or multi-mode (MST: Multi Stream Transport) through DP Out.
••This function can be configured in the Installation Menu (For more information, refer to the Installation
Menu manual.)
••If it is On, the image of each display is displayed in multi-mode.
••If it is Off, the image of each display is displayed in single mode.
••The multi-mode is available in a PC supporting DISPLAYPORT 1.2.
••Multi-mode can connect up to only four monitors. (at the recommended resolution)
••When this function is used, your monitor may not work properly depending on the video card. Reboot the
PC after setting the function to Off for stable screen output when not in use.
••In case of using DVI/HDMI Input to DP daisy chain, please set Multi Display Mode Function to off.
ENGLISH
Using the Multi Display Mode Function
22
ENTERTAINMENT
ENGLISH
Using the Input List
ENTERTAINMENT
Remote Control (HOME)
Input Mode
HDMI1
HDMI2/OPS
DISPLAYPORT
DVI
Description
You can watch content on a PC, DVD
player, digital set-top box, and other
high definition devices.
Using My Media
Connecting USB Storage Devices
Connect a USB storage device such as a USB flash
memory or an external hard drive to the display
and use multimedia features.
CAUTION
Connect a USB flash memory or USB memory card
reader to the display as shown in the following
illustration.
••If the OPS kit is connected to the HDMI2/OPS
port, the HDMI2/OPS port is used as the OPS
port.
OR
CAUTION
••Do not turn off the monitor or remove a USB
storage device when the My Media screen is
activated. This could result in loss of files or
damage to the USB storage device.
••Back up files you have saved on a USB storage
device frequently, as loss or damage to the
files may be not covered by the warranty.
ENTERTAINMENT
23
••Only a USB storage device can be recognized.
••A USB device does not work effectively when it is connected via a USB hub.
••A USB storage device using an automatic recognition program may not be recognized.
••A USB storage device using its own driver may not be recognized.
••The recognition speed of a USB storage device may depend on each device.
••Please do not turn off the display or unplug the USB storage device when the connected device is working. If
the USB storage device is suddenly disconnected, the stored files or the device itself may be damaged.
••Please do not connect a USB storage device which was modified to work on a PC. The device may cause
the monitor to malfunction or the content fail to be played. Use only a USB storage device which contains
normal music, image or video files.
••A USB storage device formatted as a utility program not supported by Windows may not be recognized.
••A USB storage device (over 0.5 A) which requires an external power supply must be connected to a power
supply separately. If it is not, the device may not be recognized.
••Please connect the USB storage device using the cable provided by the device manufacturer.
••Some USB storage devices may not be supported or operate smoothly.
••File alignment method of USB storage devices is similar to that of Window XP and filenames can recognize
up to 100 English characters.
••Back up important files regularly as data stored on a USB storage device may be damaged. We will not be
responsible for any data loss.
••If the USB HDD does not have an external power source, the USB device may not be detected. To ensure the
device is detected, connect the external power source.
- Please use a power adapter for an external power source. We do not provide a USB cable for an external
power source.
••If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to
four partitions or USB storage devices.
••If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected.
••If the USB storage device does not work properly, disconnect and reconnect it.
••Detection speed differs from device to device.
••If the USB storage device is connected in Standby Mode, the specific hard disk will automatically be loaded
when the display is turned on.
••The recommended capacity is 1 TB or less for a USB external hard drive and 32 GB or less for USB memory
stick.
••Any device with more than the recommended capacity may not work properly.
••If a USB external hard drive with an Energy Saving function does not work, try turning the hard drive off and
on again.
••USB storage devices below USB 2.0 are also supported but may not function correctly in the Videos.
••A maximum of 999 sub-folders or files can be recognized under one folder.
ENGLISH
Tips for using USB storage devices
24
ENTERTAINMENT
ENGLISH
Files Supported by My Media
Supported External Subtitle Format
• *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX)
To use Select Play
Remote Control (HOME)
Photos/ Videos/ Music
• Play Selection: plays back selected content.
To set Device Selection
Remote Control (HOME)
Photos/ Videos/ Music
• Device Selection: import contents from the selected device.
ENTERTAINMENT
25
••FULL HD Video
1920 X 1080: XSUB (Supports internal subtitles generated from DivX6)
Supported Video Codec
Extension
Codec
.asf
.wmv
Videos
VC-1 Advanced Profile (excluding WMVA), VC-1 Simple and Main Profiles
Audio
WMA Standard (excluding WMA v1/WMA Speech), WMA 9 Professional
.divx
.avi
Videos
DivX3.11, DivX4, DivX5, DivX6, XViD (except 3 warp-point GMC), H.264/AVC, Motion
Jpeg, MPEG-4
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, LPCM,
ADPCM, DTS
.mp4
.m4v
.mov
Videos
H.264/AVC, MPEG-4
Audio
AAC, MPEG-1 Layer III (MP3)
.3gp
.3g2
Videos
H.264/AVC, MPEG-4
Audio
AAC, AMR-NB, AMR-WB
mkv
Videos
MPEG-2, MPEG-4, H.264/AVC, VP8
Audio
Dolby Digital, PCM, DTS, MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Vorbis, AAC
.ts
.trp
.tp
.mts
Videos
H.264/AVC, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, AAC,
PCM
.mpg
.mpeg
.dat
Videos
MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
.vob
Videos
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
ENGLISH
Supported Internal Subtitle Format
26
ENTERTAINMENT
ENGLISH
Supported Audio File
File Format
MP3
Item
Information
Bit rate
32 Kbps - 320 Kbps
Sample freq.
16 KHz - 48 KHz
Support
MPEG1, MPEG2, Layer2, Layer3
.wav
Support
PCM
.ogg
Support
Vorbis
.wma
Support
WMA
Supported Photo File
File Format
Format
Item
2D (jpeg, jpg,
jpe)
JPEG
yyMinimum : 64 x 64
yyMaximum: Normal Type: 15360 (W) x 8640 (H) / Progressive Type: 1920 (W) x 1440
(H)
2D (png)
PNG
yyMinimum : 64 x 64
yyMaximum: 1920 (W) x 1080 (H)
2D (bmp)
BMP
yyMinimum : 64 x 64
yyMaximum: 1920 (W) x 1080 (H)
ENTERTAINMENT
27
Play video files on display. All of the saved video files are shown in your display.
To play video files on display
Remote Control (HOME)
Videos
Tips for Playing Video Files
• Some user-created subtitles may not work properly.
• Some special characters in subtitles are not rendered.
• HTML tags are not supported in subtitles.
• Subtitles in languages other than the supported languages are not available.
• The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio
language is changed.
• A damaged video file may not play correctly, or some player functions may not be usable.
• Video files produced with some encoders may not be played correctly.
• If the video and audio structure of a recorded file is not interleaved, either video or audio is outputted.
• Depending on the frame, HD videos with a maximum of 1920 x 1080 @ 25/30 P or 1280 x 720 @ 50/60P are
supported.
• Depending on the frame, videos with resolutions higher than 1920 x 1080 @ 25/30 P or 1280 x 720 @ 50/60 P
may not play correctly.
• Video files other than the specified types and formats may not play correctly.
• Maximum bit rate of playable video file is 20 Mbps. (Motion JPEG: 10 Mbps only)
• We cannot guarantee smooth playback of files encoded level 4.1 or higher in H.264 / AVC.
• Video files more than 30 GB in file size are not supported.
• A DivX video file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
• Playing a video via a USB connection that does not support high-speed connection may not function
correctly.
• Files encoded with GMC (Global Motion Compensation) may not be played.
ENGLISH
Viewing Videos
28
ENTERTAINMENT
ENGLISH
NOTE
••Option values changed in Videos do not affect the Photos and Music. and in turn are not affected by
option values changed in Photos or Music.
••Option values changed in Photos and Music do affect each other.
••When restarting a video file after stopping it, you can play from the point at which it was stopped.
••Only 10,000 sync blocks can be supported within the subtitle file.
••When playing a video, you can adjust the picture size by pressing the ARC button.
••Korean subtitle is supported only when the OSD menu is in Korean.
••The code page options may be disabled depending on the language of the subtitle files.
••Select the appropriate code page for the subtitle files.
ENTERTAINMENT
29
The displays on the screen may differ from the model.
Viewing image files
Remote Control (HOME)
Photos
Listening to Music
Viewing music files
Remote Control (HOME)
Music
NOTE
• Files with unsupported extensions are not displayed.
• If a file is invalid, a broken image and the message ‘Unrecognizable file’ are displayed.
• Damaged music files are displayed as 00:00 and will not be played.
• A music file downloaded from a paid service with copyright protection will not play, and incorrect
information may be displayed during playback.
• You can use
,
,
,
,
buttons on the remote control also in this mode.
• You can use the
button to select the next track and the
button to select the previous track.
• If you press the
button within 5 seconds after playing the song, you will return to the previous song; if
you press the same button after 5 seconds, you will return to the start of the song.
ENGLISH
Viewing Photos
30
ENTERTAINMENT
ENGLISH
Settings
You must register your product to play a DRM-protected DivX video.
In order to register/deregister purchased or rented DivX ® VOD contents
Remote Control (HOME)
Settings
DivX ® VOD
In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX
registration code from your device at www.divx.com/vod.
• Registration: view the registration code of your display.
• Deregistration: cancel the registration.
NOTE
• While you are checking the registration code, some buttons may not work.
• If you use the DivX registration code of another device, you cannot play rented or purchased DivX files.
Use only the DivX registration code assigned to your product.
• Video or audio files that are not converted using the standard DivX codec may be corrupted or not play.
• The DivX VOD code allows you to activate up to 6 devices under one account.
• After deregistration, you must register your device again to see DivX® VOD contents.
ENTERTAINMENT
File Manager
Plays stored files using the Export option in
SuperSign Editor.
You can move, copy, or delete files.
To play back the stored files using the Export
option
To move, copy, or delete files
Remote Control (HOME)
Remote Control (HOME)
Only contents distributed by SuperSign Manager
are displayed and selectable.
NOTE
••If there is an AutoPlay folder in the
USB storage device and its files are in
supported formats, they will be played back
automatically when the USB storage device is
connected to the monitor.
••You can move or copy files or folders from
internal to external memory.
••You can move or copy files or folders from
external to internal memory.
••You can delete files or folders from internal or
external memory.
NOTE
••This app is for managing files and therefore
cannot play media files. To play media files,
launch My Media.
••Those files bigger than internal remaining
memory aren`t allowed to be copied or moved
to the internal memory.
Using Mirror Scene
Information
To check the basic information of Signage
Monitor
Remote Control (HOME)
You can see the basic information on Signage
Monitor.
You can also switch to Smart Energy Saving
Mode or configure Fail Over settings. (You can
switch to Smart Energy Saving Mode only when
Energy Saving Mode is set to Off.)
••Due to the characteristic of Mirror Scene, the
black part of the screen may be reflect the
object which is located front side of set.
••Use the Screen Off Select feature to quickly
switch between the Mirror and Display Scene. If
you want to know the way how to use Screen
Off Select, refer to Installation Manual.
••Due to the way the Mirror Display works, there
may be color changes depending upon the
angle at which the product is viewed.
••Please take caution with the lighting and
surrounding environment during installation.
There may be some discomfort felt depending
on the lighting angle and color.
ENGLISH
SuperSign Contents
31
32
ENTERTAINMENT
ENGLISH
PICTURE ID Settings
PICTURE ID is used to change the settings of a
specific set (display) using a single IR receiver for
multi-vision. Communication is possible between
a monitor with an IR receiver and other monitors
using RS-232C cables. Each monitor is identified
by a Set ID. If you assign the PICTURE ID using
the remote control, only displays with matching
PICTURE ID and Set ID can be controlled remotely.
3
Assign the Set ID to the selection of your
choice.
••A set with a different Set ID from the PICTURE
ID cannot be controlled by IR signals.
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
NOTE
REMOTE
CONTROL IN
1
Assign the Set ID to the installed monitors as
shown below.
IR & Light Sensor
RS-232C cables
PICTURE ID ON [2]
2
Press the red ON button on the remote control
to assign the PICTURE ID.
••If PICTURE ID is set to 2, only the upper
right monitor, which has a Set ID of 2, can be
controlled by IR signals.
••If you press the green OFF button for PICTURE
ID, the PICTURE IDs for all monitors are turned
off. If you then press any button on the remote
control, all monitors can be controlled by IR
signals regardless of Set ID.
••With PICTURE ID ON, you can only increase
the PICTURE ID by 1. You cannot decrease it.
USER SETTINGS
33
ENGLISH
User Settings
Main Menu Settings
Quick Settings
Configures frequently used settings menus.
To turn your monitor on or off automatically
Remote Control (SETTINGS)
Quick
On Timer/Off Timer
You can set the On/Off Timer for your monitor. If you do not want to set the On/Off Timer, select Off in Repeat.
To set the backlight and contrast automatically
Remote Control (SETTINGS)
Quick
Smart Energy Saving
According to picture brightness, the brightness of the monitor will be adjusted automatically to save
energy.
••Off: disables the Smart Energy Saving function.
••On: enables the Smart Energy Saving function.
34
USER SETTINGS
ENGLISH
Picture Settings
To Select Picture Mode
Remote Control (SETTINGS)
Picture
Picture Mode
Select the picture mode that is best suited to the video type.
••Vivid: adjusts the video image for a retail environment by enhancing the contrast, brightness, and
sharpness.
••Standard: adjusts the video image for a normal environment.
••APS: reduces power consumption by adjusting the brightness of the screen.
••Cinema: optimizes the video image for watching movies.
••Sports: optimizes the video image for watching sports. Even fast actions such as kicking or throwing a ball
are rendered clearly on the screen.
••Game: optimizes the video image for playing videogames.
••Expert 1/Expert 2: allows an expert, or anyone interested in high quality pictures, to manually tune the
picture for the best picture quality.
NOTE
••Depending on the input signal, the available picture modes may differ.
••Expert is an option that allows a picture quality expert to fine-tune the picture quality using a specific
image. Thus, it may not be effective for a normal picture.
USER SETTINGS
35
Remote Control (SETTINGS)
Picture
Picture Adjust
••Backlight: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to
100, the brighter the screen is.
••Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value is to
100, the greater the difference is.
••Brightness: adjusts the overall brightness of the screen. The closer the value is to 100, the brighter the
screen is.
••Sharpness: adjusts the sharpness of the edges of objects. The closer the value is 50, the clearer and the
sharper the edge becomes.
••H Sharpness: adjusts the sharpness of the contrast edges on the screen from a horizontal point of view.
••V Sharpness: adjusts the sharpness of the contrast edges on the screen from a vertical point of view.
••Color: softens or deepens the tints on the screen. The closer the value is 100, the deeper the colors become.
••Tint: adjusts the balance between red and green levels displayed on the screen. The closer the value is to
Red 50, the deeper the color red becomes, and the closer the value is to Green 50, the deeper the color
green becomes.
••Color Temperature: adjusts the tints of the screen to evoke feelings of warmth or coolness.
••Advanced Control/Expert Control: customizes the advanced options.
Dynamic
Contrast
Optimizes the difference between the light and dark parts of the screen according to the brightness
of the image.
Super Resolution
Sharpens the blurry or indistinguishable parts of the picture.
Color Gamut
Selects the range of colors to display.
Dynamic Color
Adjusts the tint and saturation of the image for a more vivid and lively display.
Edge Enhancer
Provides much sharper and clearer edges to the picture.
Color Filter
Accurately adjusts color and tint by filtering a specific color area of RGB space.
Preferred Color
Adjusts the skin tint, grass tint, and sky tint to your preference.
Gamma
Adjusts the medium brightness of the image.
White Balance
Adjusts the overall tint of the picture to your preference.
In Expert mode, you can fine-tune the picture using the Method/Pattern options.
Color
Management
System
Experts use the color management system when they adjust the colors by using the test pattern.
The color management system allows you to make an adjustment by selecting from among 6
different color spaces (Red/Yellow/Blue/Cyan/Magenta/Green) without affecting other colors.
You may not see tints change in a normal picture even after adjustment.
NOTE
••Depending upon the input signal or the selected picture mode, the available options may differ.
ENGLISH
To fine-tune the picture mode
36
USER SETTINGS
ENGLISH
••Picture Options: customizes the picture options.
Noise Reduction
Removes irregularly generated tiny dots for a clear picture.
MPEG Noise
Reduction
Reduces the noise produced while creating digital video signals.
Black Level
Adjusts the black level of the picture to correct the brightness and contrast of the picture.
Real Cinema
Optimizes the video image for a cinematic look.
TruMotion
Displays fast-moving pictures with optimal picture quality.
-Off: Turns off the TruMotion.
-Smooth: displays fast-moving pictures smoothly.
-Clear: displays fast-moving pictures clearly.
-User: set de-judder manually.
*De-judder: adjusts judder on the screen.
NOTE
••You can adjust advanced settings only in the User mode.
••Reset: resets the picture settings.
To set the aspect ratio,
Remote Control (SETTINGS)
Picture
Aspect Ratio
Changes the aspect ratio to view the image in its optimal size.
••16:9: displays the image with a 16:9 aspect ratio.
••Just Scan: displays the image in the original size without cutting off the edges.
Original is available in HDMI (720p or higher) mode.
••Set By Program: automatically changes the aspect ratio to 4:3 or 16:9 depending on the input video signal.
••4:3: displays the image with a 4:3 aspect ratio.
••Zoom: expands the image to fit to the width of the screen. The top and bottom of the image may be
cropped.
••Cinema Zoom: enlarges the image to have a cinemascope ratio of 2.35:1 without distortion.
USER SETTINGS
37
••If a fixed image is displayed on the screen for a long period of time, it will be imprinted and become a
permanent disfigurement on the screen. This image burn or burn-in is not covered by the warranty.
••If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of
the screen.
••The options may differ depending on the model.
••Depending on the input signal, the available aspect ratio may differ.
••You can select only 4:3 and 16:9 aspect ratios in HDMI1-PC/ HDMI2(OPS)-PC/ DISPLAYPORT-PC/ DVI-PC
input mode.
To use the Energy Saving function
Remote Control (SETTINGS)
Picture
Energy Saving
Reduces power consumption by adjusting the brightness of the screen.
••Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only with
certain models.)
••Off: disables the Energy Saving mode.
••Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level specified for
your monitor.
••Screen Off: turns off the screen. You will only hear audio. You can turn on the screen again by pressing any
button on the remote control except the power button.
To use the Smart Energy Saving function
Remote Control (SETTINGS)
Picture
Smart Energy Saving
According to picture brightness, the brightness of the monitor will be adjusted automatically to save energy.
••Off: disables the Smart Energy Saving function.
••On: enables the Smart Energy Saving function.
To run a Picture Test
Remote Control (SETTINGS)
Picture
Picture Test
Run a Picture Test to check that picture signals are outputted normally, then solve any problems by selecting
the relevant option on the screen. If there are no problems with the Test Picture, check connected external
devices.
ENGLISH
CAUTION
38
USER SETTINGS
ENGLISH
Sound Settings
To select a Sound Mode
Remote Control (SETTINGS)
Sound
Sound Mode
The best sound quality will be selected automatically depending on the video type currently being watched.
••Standard: this sound mode works well for content of all types.
••News: optimizes sound for watching news.
••Music: optimizes sound for listening to music.
••Cinema: optimizes sound for watching movies.
••Sports: optimizes sound for watching sports.
••Game: optimizes sound for playing videogames.
To use the Sound Effects function
Remote Control (SETTINGS)
Sound
Sound Effects
••Clear Voice ll: enjoy clearer sound with the three-level adjustment.
••Equalizer: manually adjust sound by using the equalizer. .
••Balance: adjust the output volume for the left speaker and the right speaker.
••Reset: reset the sound settings.
To select a Volume Increase Rate,
Remote Control (SETTINGS)
Sound
Volume Increase Rate
you can set the volume range by selecting any of Low/ Medium/ High.
To sync audio with video
Remote Control (SETTINGS)
Sound
AV Sync. Adjust
••Speaker: adjusts the sync between video and audio coming from external speakers, such as those
connected to the digital audio output port, LG audio equipment, or headphones. From the default
value, the closer the value is to -, the faster the sound output becomes, and the closer the value is
to +, the slower the sound output becomes.
••Bypass: audio coming from external devices without delay. Audio may be outputted earlier than video due
to the processing time for video that is inputted into the monitor.
USER SETTINGS
39
Remote Control (SETTINGS)
Sound
Sound Test
Run a sound test to check that sound signals are outputted normally, then solve any problems by selecting the
relevant option on the screen. If there are no problems with the Sound Test, check connected external devices.
Network Settings
To Set a Signage Monitor Name
Remote Control (SETTINGS)
Network
Signage Name
You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard.
To Set Your Network
Remote Control (SETTINGS)
Network
Wired Connection (Ethernet)
••Connecting to a wired network: connect the display to a Local Area Network (LAN) via the LAN port as
shown in the following illustration and set up the network settings.
Only wired network connections are supported. After making a physical
connection, a small number of networks may require the display network
settings to be adjusted. For most networks, the display will automatically
make a connection without any adjustments. For detailed information,
contact your Internet provider or consult your router manual.
Setting a Wireless Network
Remote Control (SETTINGS)
Network
Wi-Fi Connection
If you have set the monitor up for a wireless network, you can check and connect to the available wireless
Internet networks.
••Add a Hidden Wireless Network: If you input the name of network directly, you can add a wireless network.
••Connect via WPS PBC: Connects easily when the button of a wireless AP supporting PBC is pressed.
••Connect via WPS PIN: Connects easily when the PIN of the wireless AP that you wish to connect to is entered
in to the AP configuration webpage.
••Advanced Settings: If you input the information of network directly, you can enter a wireless network.
If there is no wireless network available, click Advanced Settings. You can add a
network.
ENGLISH
To Run a sound test
40
USER SETTINGS
ENGLISH
Tips for Network Setting
••Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display.
••Many network connection problems during set-up can often be fixed by re-setting the router or modem.
After connecting the display to the home network, quickly power off and/or disconnect the power cable of
the home network router or cable modem, then power on and/or connect the power cable again.
••Depending on the Internet Service Provider (ISP), the number of devices that can receive Internet service
may be limited by the applicable terms of service. For details, contact your ISP.
••LG is not responsible for any malfunction of the display and/or the Internet connection feature due
to communication errors/malfunctions associated with your Internet connection, or other connected
equipment.
••LG is not responsible for problems with your Internet connection.
••You may experience undesired results if the network connection speed does not meet the requirements of
the content being accessed.
••Some Internet connection operations may not be possible due to certain restrictions set by the Internet
Service Provider (ISP) supplying your Internet connection.
••Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
LAN
Router
@
Internet
Internet
LAN
WAN
ETHERNET
Cable modem
NOTE
••If you want to access the Internet directly on your display, the Internet connection should always be on.
••If you cannot access the Internet, check the network conditions from a PC on your network.
••When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.
••If you do not complete the network settings, the network may not function correctly.
CAUTION
••Do not connect a modular telephone cable to the LAN port.
••Since there are various connection methods, please follow the specifications of your telecommunication
carrier or Internet Service Provider.
••Network Setting menu will not be available until the display is connected to a physical network.
USER SETTINGS
41
••Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz
(wireless phones, Bluetooth devices or microwave ovens). There may also be interference from devices with
a frequency of 5 GHz, same as other Wi-Fi devices.
••The surrounding wireless environment can cause the wireless network service to run slowly.
••If you do not turn off the entire local home network, network traffic may occur on some devices.
••For an AP connection, an access point device that supports wireless connection is required and the wireless
connection feature must be enabled on the device. Contact your service provider regarding availability of
wireless connection on your access point.
••Check the SSID and security settings of the AP for AP connection. Refer to the appropriate documentation
for SSID and security settings of the AP.
••Invalid settings on network devices (wired/wireless line sharer, hub) can cause the monitor to run slowly or
not operate properly. Install the devices correctly according to the appropriate manual and set the network.
••Connection method may differ according to the AP manufacturer.
General Settings
To configure the language
Remote Control (SETTINGS)
General
Menu Language
Select one of the languages on the menu displayed on the screen.
••Menu Language: sets a language for Signage.
To set the time/date
Remote Control (SETTINGS)
General
You can check or change the time.
••Time: you can set the time manually.
••Date: you can set the date manually.
Time & Date
ENGLISH
Tips for Wireless Network Setting
42
USER SETTINGS
ENGLISH
To apply Daylight Saving Time
Remote Control (SETTINGS)
General
Daylight Saving Time
You can set the application period for Daylight Saving Time and enable or disable the function by selecting On/
Off.
••Start Time / End Time: You can set the time by configuring month/nth/day/time settings.
NOTE
••When setting the Daylight Saving Time, configure the number of week and day of the week settings.
••For example, if the Daylight Saving Time starts on July 7th, 2014, Monday, set the time as July/ 1st/ Mon/
00:00 since it is the first Monday of July, 2014.
••Depending on the month, either the fourth or fifth week can be Last.
To turn your monitor on or off automatically
Remote Control (SETTINGS)
General
Timers
You can set the On/Off Timer for your monitor.
••On Timer: you can set the time when your monitor turns on.
••Off Timer: you can set the time when your monitor turns off.
••No Signal Power Off (15 minutes): If you do not press any button within 15 minutes of the monitor being
turned on by the On Timer feature, the monitor turns off automatically.
To ensure the monitor does not turn off automatically, set Auto Off to
Off.
••Auto Power Off (4 Hours): If you do not press any button within four hours of the monitor being turned on,
the monitor enters Standby mode automatically.
NOTE
••On Time/Off Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time
in the schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest
time from the current time.
••Once the on or off time is set, these functions operate daily at the preset time.
••The scheduled power-off function works properly only when the device time is set correctly.
••When the scheduled power-on and power-off times are the same, the power-off time has priority over the
power-on time if the set is turned on, and vice versa if the set is turned off.
To reset your monitor settings
Remote Control (SETTINGS)
Resets all monitor settings.
General
Reset to Initial Settings
TROUBLESHOOTING
43
ENGLISH
TROUBLESHOOTING
No image is displayed
Problem
Action
Is the product power cord connected?
yy
Check if the power cord is correctly plugged into the power
outlet.
yy
The signal from the PC (video card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency
range by referring to the Specifications in this manual.
* Maximum resolution: 1920 x 1080 (60Hz)
yy
The signal cable between PC and product is not connected.
Check the signal cable.
yy
Press the INPUT menu in the remote Control to check the input
signal.
Does the Out of range message
appear?
Does the Check signal cable message
appear?
The Unknown Product message appears when the product is connected.
Problem
Did you install the driver?
Action
yy
Check if the Plug & Play function is supported by referring to the
video card user manual.
The screen image looks abnormal.
Problem
Is the screen position wrong?
The screen is displayed abnormally.
Action
yy
Check if the video card resolution and frequency are supported
by the product. If the frequency is out of range, set to the
recommended resolution in the Control Panel Display Setting
menu.
yy
The proper input signal is not connected to the signal port.
Connect the signal cable that matches with the source input
signal.
NOTE
••The software-related contents may be changed without prior notice due to upgrade of the product
functions.
44
TROUBLESHOOTING
ENGLISH
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Action
yy
If you use a fixed image for a long time, the pixels may be
damaged. Use the screen-saver function.
yy
When a dark image is displayed on the screen after an image
with high contrast (black and white or gray), this may cause
image sticking. This is normal for LCD screen products.
The audio function does not work.
Problem
No sound?
Sound is too dull.
Sound is too low.
Action
yy
See if the audio cable is connected properly.
yy
Adjust the volume.
yy
See if the sound is set properly.
yy
Select the appropriate equalizer sound.
yy
Adjust the volume.
Screen color is abnormal.
Problem
Action
Screen has poor color resolution
(16 colors).
yy
Set the number of colors to more than 24 bits (true color). Select
Control Panel - Display - Settings - Color Table menu in Windows.
S creen color is unstable or
mono-colored.
yy
Check the connection status of the signal cable. Or, re-insert the
PC video card.
Do black spots appear on the screen?
yy
Several pixels (red, green, white, or black color) may appear
on the screen, which can be attributable to the unique
characteristics of the LCD panel. This is not a malfunction of the
LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Action
yy
Is the Timer set?
yy
Check the power control settings. Power interrupted.
PRODUCT SPECIFICATIONS
LCD screen
Screen type
123 cm Wide Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Video signal
Pixel pitch
Diagonal length of the screen: 123 cm
0.55926 mm (H) x 0.55926 mm (V)
Maximum resolution
1920 x 1080 @ 60 Hz
- This may not be supported on some OS or graphic card
types.
1920 x 1080 @ 60 Hz
Recommended
resolution
Horizontal frequency
- This may not be supported on some OS or graphic card
types.
HDMI / DVI / DISPLAYPORT: 30 kHz to 83 kHz
Vertical frequency
HDMI / DVI / DISPLAYPORT: 56 Hz to 60 Hz
Synchronization
Digital
Input ports
Audio, LAN, HDMI1, HDMI2/OPS, IR & Light sensor,
Output ports
Pixel Sensor, DVI, DISPLAYPORT IN, USB, RS-232C IN
DISPLAYPORT OUT, RS-232C OUT, SPEAKER OUT
Embedded battery
Power
Applied
Rated power
AC 100-240 V~ 50/60 Hz 1.8 A
Power consumption
On Mode: 125 W Typ
Sleep Mode (DVI , HDMI): ≤ 1.0 W
Sleep Mode(DISPLAYPORT): ≤ 0.7 W
Environmental
Conditions
Operating Temperature
Off Mode: ≤ 0.5W
0 °C to 40 °C
Operating Humidity
Storage Temperature
10 % to 80 %
-20 °C to 60 °C
Storage Humidity
5 % to 95 %
The specifications shown above may be changed without prior notice to improve quality.
“ ” refers to alternating current (AC), and “
” refers to direct current (DC).
ENGLISH
PRODUCT SPECIFICATIONS
45
46
PRODUCT SPECIFICATIONS
ENGLISH
Dimensions (Width
x Height x Depth) /
Weight
1095 mm x 625.2 mm x 37.3 mm / 22.0 kg
1095 mm x 699.9 mm x 298.3 mm / 23.4 kg
1095 mm x 625.2 mm x 86.9 mm / 22.8 kg
1095 mm x 699.9 mm x 298.3 mm / 24.2 kg
* Applicable only for models that support the speakers
Audio/AUDIO
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
The specifications shown above may be changed without prior notice to improve quality.
PRODUCT SPECIFICATIONS
47
The illustrations in this manual may differ from the actual product and accessories.
Please see Mounting on a wall section for screw sizes.
The product specifications below may be changed without prior notice due to upgrade of product functions.
(Unit: mm)
1095
8.4
34
8.4
625.2
37.3
129.5
817.6
112.6
347.5
400
400
112.6
347.5
ENGLISH
Product Dimensions
48
PRODUCT SPECIFICATIONS
ENGLISH
HDMI(OPS) / DVI / DISPLAYPORT (PC) Support
Mode
Resolution
Horizontal
Vertical frequency
frequency (kHz) (Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
DTV mode
Resolution
HDMI(OPS) / DISPLAYPORT (DTV)
480i
x
576i
x
480p
o
576p
o
720p
o
1080i
o
1080p
o
NOTE
••PC resolutions available for the Input Label
option in HDMI(OPS) / DVI / DISPLAYPORT input
modes: 640 x 480/60 Hz, 1280 x 720/60 Hz,
1920 x 1080/60 Hz; 480p, 720p, and 1080p DTV
resolutions.
NOTE
••Vertical frequency The product display
functions by the screen image changing
dozens of times every second like a fluorescent
lamp.
The vertical frequency or refresh rate is the
number of image displays per second. The unit
is Hz.
••Horizontal frequency The horizontal interval
is the time taken to display one horizontal line.
When 1 is divided by the horizontal interval,
the number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
IR CODES
ENGLISH
IR CODES
All models do not support the HDMI/USB function.
Some key codes may not be supported depending on the model.
Code (Hex)
Function
Remarks
08
POWER
Remote control button
C4
MONITOR ON
Remote control button
C5
MONITOR OFF
Remote control button
95
Energy Saving
Remote control button
0B
INPUT
Remote control button
10
Number Key 0
Remote control button
11
Number Key 1
Remote control button
12
Number Key 2
Remote control button
13
Number Key 3
Remote control button
14
Number Key 4
Remote control button
15
Number Key 5
Remote control button
16
Number Key 6
Remote control button
17
Number Key 7
Remote control button
18
Number Key 8
Remote control button
19
Number Key 9
Remote control button
02
Volume
Remote control button
03
Volume
Remote control button
E0
BRIGHTNESS
(Page Up)
Remote control button
E1
BRIGHTNESS
(Page Down)
Remote control button
DC
3D
Remote control button
32
1/a/A
Remote control button
2F
CLEAR
Remote control button
7E
49
Remote control button
79
ARC(MARK) (Aspect Ratio)
Remote control button
4D
PSM (Picture Mode)
Remote control button
09
MUTE
Remote control button
43
SETTINGS (Menu)
Remote control button
99
Auto Config.
Remote control button
40
Up
Remote control button
41
Down
Remote control button
06
Right
Remote control button
07
Left
Remote control button
44
OK
Remote control button
28
BACK
Remote control button
50
IR CODES
ENGLISH
Code (Hex)
Function
Remarks
7B
TILE
Remote control button
5B
EXIT
Remote control button
72
ID ON (RED)
Remote control button
71
ID OFF (GREEN)
Remote control button
63
YELLOW
Remote control Button
61
BLUE
Remote control button
B1
Remote control button
B0
Remote control button
BA
Remote control button
8F
Remote control button
Remote control button
8E
5F
W.BAL
Remote control button
3F
S.MENU
Remote control button
7C
HOME
Remote control button
* Some key codes are not supported depending on the model.
TO CONTROL MULTIPLE PRODUCTS
51
Use this method to connect several products to a single PC. You can control several products at a time by
connecting them to a single PC.
In the Option menu, the Set ID must be between 1 and 1000 without being duplicated.
Connecting the Cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the product on or
off, select an input source or adjust the OSD menu from your PC.
PC
Monitor 1
Monitor 2
Monitor 3
Monitor 4
RS-232C Cable (sold separately)
RS-232C Configurations
8-Wire Configurations (Standard RS-232C cable)
PC
DCD
RXD
TXD
GND
DTR
DSR
RTS
CTS
Set
1
2
3
5
4
6
7
8
D-Sub 9
(Female)
1
3
2
5
6
4
8
7
DCD
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
Baud Rate 9600 BPS
NOTE
••When using three-wire connections (nonstandard), an IR daisy chain cannot be used.
NOTE
••When monitors connected via Daisy Chain (that
controls multiple monitors) are turned off and
on successively, some monitors may not turn
on. In this case, you can turn those monitors on
by pressing the MONITOR ON button, not the
POWER button.
Data Length 8 bit
Parity Bit None
Stop Bit 1 bit
(POWER)
Flow Control None
Communication Code ASCII code
Use a crossed (reverse) cable
MONITOR ON
ENGLISH
TO CONTROL MULTIPLE PRODUCTS
52
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
Command Reference List
COMMAND
1
DATA
(Hexadecimal)
2
01
Power
k
a
00 to 01
02
Select input
x
b
See Select Input
03
Aspect Ratio
k
c
See Aspect Ratio
04
Energy Saving
j
q
See Energy Saving
05
Picture Mode
d
x
See Picture Mode
06
Contrast
k
g
00 to 64
07
Brightness
k
h
00 to 64
08
Sharpness
k
k
00 to 32
09
Color
k
i
00 to 64
10
Tint
k
j
00 to 64
11
Color temperature
x
u
00 to 64
12
Balance
k
t
00 to 64
13
Sound Mode
d
y
See Sound Mode
14
Mute
k
e
00 to 01
15
Volume Control
k
f
00 to 64
16
Time 1 (year/month/day)
f
a
See Time 1
17
Time 2 (hour/minute/second)
f
x
See Time 2
18
Off time schedule
f
c
00 to 01
19
On Time Schedule
f
b
00 to 01
20
Off Timer (Repeat/Time)
f
e
See Off Timer
21
On Timer (Repeat/Time)
f
d
See On Timer
22
On Timer Input
f
u
Refer to On Timer Input.
23
No Signal Power Off (15Min)
f
g
00 to 01
24
Auto Power Off (4 Hours)
m
n
00 to 01
25
Language
f
i
See Language
26
Reset
f
k
00, 02
27
Current Temperature
d
n
FF
28
Key
m
c
See Key
29
Time Elapsed
d
l
FF
30
Product Serial Number
f
y
FF
31
Software Version
f
z
FF
32
White Balance Red Gain
j
m
00 to FE
33
White Balance Green Gain
j
n
00 to FE
TO CONTROL MULTIPLE PRODUCTS
2
DATA
(Hexadecimal)
34
White Balance Blue Gain
j
o
00 to FE
35
White Balance Red Offset
s
x
00 to 7F
36
White Balance Green Offset
s
y
00 to 7F
37
White Balance Blue Offset
s
z
00 to 7F
38
Backlight
m
g
00 to 64
39
Screen off
k
d
00 to 01
40
Tile Mode
d
d
00 to FF
41
Check Tile Mode
d
z
FF
42
Tile ID
d
i
See Tile ID
43
Natural Mode
d
j
00 to 01
44
DPM Select
f
j
00 to 07
45
Remote Control/Local Key Lock
k
m
00 to 01
46
Power On Delay
f
h
00 to FA
47
Fail Over Select
m
i
00 to 02
48
Fail Over Input Select
m
j
See Fail Over Input Select
49
IR Operation
t
p
00 to 02
50
Local Key Operation
t
o
00 to 02
51
Check the status
s
v
See Check the status
52
Check Screen
t
z
00 to 01
53
Speakers
d
v
00 to 01
54
Daylight Saving Time
s
d
Refer to Daylight Saving Time
* Note: Only the power and key commands can be used while media files are playing from a USB device or
internal/external memory. The commands other than the power and key commands will be treated as NG.
Some commands may not be supported depending on the model.
ENGLISH
COMMAND
1
53
54
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
Transmission/Reception Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: identifies between the factory setting and the user setting modes.
* [Command2]: controls monitor sets.
* [Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging
from 1 to 1000(01H~3E8H) under Settings in the OSD menu.
Selecting '00H' for Set ID allows the simultaneous control of all connected monitors.
* [Data]: Transmits command data.
Data count may increase depending on the command.
* [Cr]: Carriage Return. Corresponds to '0x0D' in ASCII code.
* [ ]: White Space. Corresponds to '0x20' in ASCII code.
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this
time, if the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data of
the PC computer.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and each monitor set
does not send an acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
*Some commands are not supported depending on the model.
TO CONTROL MULTIPLE PRODUCTS
04. Energy Saving (Command: j q)
Sets the Energy Saving.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Off
01: Minimum
02: Medium
03: Maximum
04: Automatic
05: Screen off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
*The acknowledgement signal is returned properly only when
the monitor is fully powered on.
* There may be a delay between the transmission and
acknowledgement signals.
** This may not be supported depending on the model.
02. Select Input (Command: x b)
Selects an input signal.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
05. Picture Mode (Command: d x)
Selects a picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
Data
70: DVI (PC)
80: DVI (DTV)
90: HDMI1 (DTV)
A0: HDMI1 (PC)
91: HDMI2/OPS (DTV)
A1: HDMI2/OPS (PC)
C0: DISPLAYPORT (DTV)
D0: DISPLAYPORT (PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
00: Vivid
01: Standard
02: Cinema
03: Sports
04: Game
05: Expert 1
06: Expert 2
08: APS
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported depending on the
model.
03. Aspect Ratio (Command: k c)
Adjusts the aspect ratio.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
01: 4:3
02: 16:9
04: Zoom
06: Set by Program
09: Just Scan (720p or higher)
10 to 1F: Cinema Zoom 1 to 16
* Available data types differ depending on the input signal. For
more information, see the aspect ratio section of the owner’s
manual.
* The aspect ratio may differ depending on the model's input
configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
Adjusts the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
01. Power (Command: k a)
Controls the power on/off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
55
56
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
07. Brightness (Command: k h)
Adjusts the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
10. Tint (Command: k j)
Adjusts the screen tint.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
Data
00 to 64: Tint red 50 to green 50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
Adjusts the screen sharpness.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
00 to 32: Sharpness 0 to 50
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
Adjusts the screen color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data
00 to 64: warm 50 to cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
Adjusts the screen color.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
12. Balance (Command: k t)
Adjusts the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
Data
00 to 64: left 50 to right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
57
17. Time 2 (hour/minute/second) (Command: f x)
Adjusts the Time 2 (hour/minute/second) value.
Transmission
[f ][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sports
05. Game
07: News
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
Data1
00 to 17: 00 to 23 hours
Data2
00 to 3B: 00 to 59 minutes
Data3
00 to 3B: 00 to 59 seconds
* Enter "fx [Set ID] ff" to view the Time 2 (hour/minute/second)
settings.
** This function is only available when Time 1 (year/month/
day) is set.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
14. Mute (Command: k e)
Mutes/unmutes the sound.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
00: Mute
01: Unmute
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
18. Off Time Schedule (Command: f c)
Enables/disables the Off Time Schedule.
Transmission
[f ][c][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
15. Volume Control (Command: k f)
Adjusts the playback volume.
Transmission
[k][f ][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Volume 0 to 100
Acknowledgement
[f ][ ][Set ID][ ][OK/NG][Data][x]
19. On Time Schedule (Command: f b)
Enables/disables the On Time schedule.
Transmission
[f ][b][ ][Set ID][ ][Data][Cr]
16. Time 1 (year/month/day) (Command: f a)
Adjusts the Time 1 (year/month/day) value.
Transmission
[f ][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
04~1B: year 2014 to 2037
Data2
01 to 0C: January to December
Data3
01 to 1F: 1st to 31st
* Enter "fa [Set ID] ff" to view the Time 1 (year/month/day)
settings.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data
00: Off
01: On
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
13. Sound mode (Command: d y)
Selects a sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
58
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
20. Off Timer (Repeat/Time) (Command: f e)
Configures Off Timer (Repeat/Time) settings.
Transmission
[f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
21. On timer (Repeat/Time) (Command: f d)
Configures On Timer (Repeat/Time) settings.
Transmission
[f ][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. f1h to f7h (reading data)
F1: reads the 1st Off Timer data
F2: reads the 2nd Off Timer data
F3: reads the 3rd Off Timer data
F4: reads the 4th Off Timer data
F5: reads the 5th Off Timer data
F6: reads the 6th Off Timer data
F7: reads the 7th Off Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all Off Timer settings
E1: erases the 1st Off Timer setting
E2: erases the 2nd Off Timer setting
E3: erases the 3rd Off Timer setting
E4: erases the 4th Off Timer setting
E5: erases the 5th Off Timer setting
E6: erases the 6th Off Timer setting
E7: erases the 7th Off Timer setting
3. 01h to 0Ch (sets the day of the week for the Off Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 to 17: 00 to 23 hours
Data3
00 to 3B: 00 to 59 minutes
* To read or delete the Off Time Schedule list, [Data2][Data3]
must be set to FFH.
Example 1: fe 01 f1 ff ff – reads the first index data in Off Timer.
Example 2: fe 01 e1 ff ff - deletes the first index data from Off
Timer.
Example 3: fe 01 04 02 03 - sets Off Timer to 02:03 from Monday
to Saturday.
* This function is only available when Time 1 (year/month/day)
and Time 2 (hour/minute/second) are set.
Data1
1. f1h to f7h (reading data)
F1: reads the 1st On Timer data
F2: reads the 2nd On Timer data
F3: reads the 3rd On Timer data
F4: reads the 4th On Timer data
F5: reads the 5th On Timer data
F6: reads the 6th On Timer data
F7: reads the 7th On Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all On Timer settings
E1: erases the 1st On Timer setting
E2: erases the 2nd On Timer setting
E3: erases the 3rd On Timer setting
E4: erases the 4th On Timer setting
E5: erases the 5th On Timer setting
E6: erases the 6th On Timer setting
E7: erases the 7th On Timer setting
3. 01h to 0Ch (sets the day of the week for the On Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 to 17: 00 to 23 hours
Data3
00 to 3B: 00 to 59 minutes
* To read or delete an On Time schedule list, [Data2][Data3]
must be set to FFH.
Example 1: fd 01 f1 ff ff - reads the first index data from On
Timer.
Example 2: fd 01 e1 ff ff - deletes the first index data from On
Timer.
Example 3: fd 01 04 02 03 - sets On Timer to 02:03 from Monday
to Saturday.
* This function is only available when Time 1 (year/month/day)
and Time 2 (hour/minute/second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
TO CONTROL MULTIPLE PRODUCTS
Data (Add schedule)
70: DVI
90: HDMI1
91: HDMI2/OPS
C0: DISPLAYPORT
Data1 (Read schedule)
1. f1h to f7h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2 (Read schedule)
FF
* To read the schedule input, enter FF for [Data2].
If no schedule is available for [Data1] when attempting to
read the schedule data, the text ‘NG’ will be displayed and the
operation will fail.
(Example 1: fu 01 90 - Move each schedule input down one row
and save the 1st schedule input in HDMI mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input.)
* This function is supported only when 1 (Year/Month/Day), 2
(Hour/Minute/Second), On Time (Repeat Mode/Time) are set.
** It may not be supported depending on the model.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
23. No Signal Power Off (15Min) (Command: f g)
Configures the automatic standby settings.
Transmission
[f ][g][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
24. Auto Power Off (4 Hours) (Command: m n)
Configures the automatic off settings.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: 4 hours
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
25. Language (Command: f i)
Sets the OSD language.
Transmission
[f ][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish (Europe)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (Brazil)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Chinese (Cantonese)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
22. On Timer Input (Command: f u)
Select an external input for the current On Time setting and add
a new schedule.
Transmission
[f ][u][ ][Set ID][ ][Data1][Cr]
[f ][u][ ][Set ID][ ][Data1][][Data2][Cr]
59
60
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
26. Reset (Command: f k)
Performs the Picture and Factory Reset functions.
Transmission
[f ][k][ ][Set ID][ ][Data][Cr]
Data
00: Picture Reset
02: Initial Settings (factory reset)
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
27. Current temperature (Command: d n)
Checks the inside temperature.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed as a hexadecimal value.
28. Key (Command: m c)
Sends a key code for the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
DataIR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For key codes, see IR Codes.
* Some key codes are not supported depending on the model.
29. Time Elapsed (Command: d l)
Checks the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data
FF: Read status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data received is shown as a hexadecimal value.
30. Product serial number (Command: f y)
Checks the serial number of the product.
Transmission
[f ][y][ ][Set ID][ ][Data][Cr]
Data
FF: Check product serial number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is in ASCII code.
31. Software Version (Command: f z)
Checks the software version of the product.
Transmission
[f ][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
Data
00 to FE: Red Gain 0 to 254
FF: checks the red gain value
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
33. White Balance Green Gain (Command: j n)
Adjusts the white balance green gain value.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Green Gain 0 to 254
FF: checks the green gain value
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
34. White Balance Blue Gain (Command: j o)
Adjusts the white balance blue gain value.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Blue Gain 0 to 254
FF: checks the blue gain value
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
35. White Balance Red Offset (Command: s x)
Adjusts the white balance red offset value.
Transmission
[s][x][ ][Set ID][ ][Data][Cr]
Data
00 to 7F: Red Offset 0 to 127
FF: checks the red offset value
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
36. White Balance Green Offset (Command: s y)
Adjusts the white balance green offset value.
Transmission
[s][y][ ][Set ID][ ][Data][Cr]
Data
00 to 7F: Green Offset 0 to 127
FF: checks the green offset value
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
37. White Balance Blue Offset (Command: s z)
Adjusts the white balance blue offset value.
Transmission
[s][z][ ][Set ID][ ][Data][Cr]
Data
00 to 7F: Blue Offset 0 to 127
FF: checks the blue offset value
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
32. White balance red gain (Command: j m)
Adjusts the white balance red gain value.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
61
62
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
38. Backlight (Command: m g)
Adjusts the backlight brightness.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
41. Check Tile Mode (Command: d z)
Checks the tile mode.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
Data2
Data3
39. Screen Off (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data
00: turns the screen on
01: turns the screen off
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
FF: checks the tile mode
00: tile mode off
01: tile mode on
00 to 0F: tile column
00 to 0F: tile row
42. Tile ID (Command: d i)
Sets the tile ID value of the product.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data
01 to E1: Tile ID 1 to 225**
FF: checks the tile ID
** The data value cannot exceed the value of row x column.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
* When a data value that exceeds the value of row x column
is entered (except 0xFF),
ACK becomes NG.
40. Tile Mode (Command: d d)
Sets the Tile Mode and sets values for the tile rows and
columns.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data
00 to FF: The first byte - tile column
The second byte - tile row
* 00, 01, 10, and 11 mean that the tile mode is off
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
43. Natural Mode (in Tile mode) (Command: d j)
When displaying the image naturally, the part of the image
that would normally be displayed in the gap between the
monitors is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
TO CONTROL MULTIPLE PRODUCTS
Data
00: Off
01: 5 seconds
02: 10 seconds
03: 15 seconds
04: 1 minutes
05: 3 minutes
06: 5 minutes
07: 10 minutes
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Remote Control/Local Key Lock (Command: k m)
Adjusts the remote control/local key (front) lock.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off )
01: On (Lock On)
* When the remote control and front keys are locked in
Standby mode, you cannot turn on the power on by using
the remote control or front power button.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
47. Fail Over Select (Command: m i)
Selects an input mode for auto switch.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
48. Fail Over Input Select (Command: m j)
Selects an input source for auto switch.
* This command is only available when the Fail Over (auto)
mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4][Cr]
Data 1 to 4 (Input priority: 1 to 4)
70: DVI
90: HDMI1
91: HDMI2/OPS
C0: DISPLAYPORT
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4][x]
Data 1 to 4 (Input priority: 1 to 4)
70: DVI
90: HDMI1
91: HDMI2/OPS
C0: DISPLAYPORT
46. Power On Delay (Command: f h)
Sets the schedule delay when the power turns on. (unit:
seconds).
Transmission
[f ][h][ ][Set ID][ ][Data][Cr]
Data
00 to FA: min. 0 to maximum 250 (seconds)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x
49. IR Operation (Command: t p)
Configures the IR operation settings of the product.
Transmission
[t][p][ ][Set ID][ ][Data][Cr]
Data
00: locks off all of the keys
01: locks on all of the keys except the Power key
02: locks on all of the keys
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
44. DPM Select (Command: f j)
To set the DPM (Display Power Management) function.
Transmission
[f ][j][ ][Set ID][ ][Data][Cr]
63
64
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
50. Local Key Operation (Command: t o)
Configures the local key operation settings of the product.
Transmission
[t][o][ ][Set ID][ ][Data][Cr]
Data
00: locks off all of the keys
01: locks on all of the keys except the Power key
02: locks on all of the keys
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
51. Status (Command: s v)
Checks the current signal status of the product.
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data 02: checks whether there is a signal or not
10: RGB sensing OK/NG (Check Screen)
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
Data:
Data1
02 (when a signal is found)
00: no signal
01: there is a signal
Data: 10 (Check Screen)
Data1 00: Check Screen result NG
07: Check Screen result OK
* Treated as NG if Check Screen is set to Off
53. Speaker (Command: d v)
Sets the speaker function.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
54. Daylight Saving Time (Command: s d)
To set theDaylight Saving Time function.
Transmission
[s][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4]
[ ][Data5][Cr]
Data
00: Off (Data2~5: FFH)
01: Start Time
02: End Time
Data2 01~0C: January to December
Data3 01~06: 1 ~ 6th week
* The maximum number of [Data3] differs depending on
Date.
Data4 00~06 ( Sun. ~ Sat. )
Data5 00~17: 00 ~ 23 hours
* To read the Start Time/End Time, enter FFH for
[Data2]~[Data5].
(ex1: sd 01 01 ff ff ff ff - To check the Start Time
ex2: sd 01 02 ff ff ff ff - To check the End Time)
* This function is supported only when 1 (Year/Month/ Day)
and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4]
[Data5][x]
** It may not be supported depending on the model.
52. Check Screen (Command: t z)
Sets Check Screen.
Transmission
[t][z][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial numbers of the SET
are located on the back and one side of
the SET. Record it below should you ever
need service.
MODEL
SERIAL
To obtain the source code under GPL,
LGPL, MPL, and other open source
licenses, that is contained in this product,
please visit http://opensource.lge.com. In
addition to the source code, all referred
license terms, warranty disclaimers
and copyright notices are available for
download. LG Electronics will also provide
open source code to you on CD-ROM for
a charge covering the cost of performing
such distribution (such as the cost of
media, shipping, and handling) upon email
request to opensource@lge.com. This offer
is valid for three (3) years from the date on
which you purchased the product.
WARNING -This is a class A product. In a
domestic environment this product may cause
radio interference in which case the user may
be required to take adequate measures.
Temporary noise is normal when powering
ON or OFF this device.
Download PDF