LG | 55WFB-N | LG 49WFB Owner’s Manual

OWNER’S MANUAL
Transparent
Display
Please read this manual carefully before operating your set and retain it
for future reference.
47WFB
49WFB
55WFB
www.lg.com
2
ENG
ENGLISH
CONTENTS
3
SAFETY PRECAUTIONS
3
Precautions in installing the Product
4
Precautions to the AC Adapter and
Electrical Power
5
Precautions in Moving the Product
5
Precautions in Using the Product
6
Mounting on a wall
7
INSTALLATION PREPARATION
23TROUBLESHOOTING
24SPECIFICATIONS
27 LVDS PIN MAP GUIDE
7Accessories
8
Mounting Holes
11
Portrait Layout
12
Storage Method for Panel Protection
12
- Correct Method
12
- Incorrect Method
13 PRODUCT INSTALLATION
13
Installing an LVDS Cable
14
47/55WFB LVDS connection
16
49WFB LVDS connection
18
TSP500-M LVDS connection
20
Lighting Installation
21
Installation in Enclosure
22Precaution
22
- Correct Method
22
- Incorrect Method
NOTE
The warranty will not cover any damages caused by using the product in an excessively dusty
yy
environment.
3
Please read these safety precautions carefully before using the product.
WARNING
If you ignore the warning message, you may
yy
be seriously injured or there is a possibility
of accident or death.
CAUTION
If you ignore the caution message, you
yy
may be slightly injured or the product may
be damaged.
WARNING
yyIndoor Use Only.
Precautions in installing the Product
WARNING
yyKeep away from heat sources like electrical heaters.
►Electrical
►
shock, fire, malfunction or deformation may occur.
yyKeep the packing anti-moisture material or vinyl packing out of the reach of children.
►Anti-moisture
►
material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
yyDo not put heavy objects on the product or sit upon it.
►If
► the product collapwses or is dropped, you may be injured. Children must pay particular attention.
yyDo not leave the power or signal cable unattended on the pathway.
►The
►
passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
yyInstall the product in a neat and dry place.
►Dust
►
or moisture can cause electrical shock, fire or product damage.
yyIf you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the
service center.
►If
► you continue to use without taking proper measures, electrical shock or fire can occur.
yyIf you dropped the product or the case is broken, turn off the product and unplug the power cord.
►►If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.
yyDo not drop an object on or apply impact to the product. Do not throw any toys or objects on the product
screen.
►It
► can cause injury to human, problem to product and damage the display.
yyDo not let the product fall or drop when connecting it with an external device.
►This
►
may cause injury and/or damage to the product.
yyWhen connecting it with a game device, keep a distance of four times as long as the diagonal measurement
of the screen from the device.
►If
► the product falls because of the short cable, this may cause injury and/or damage to the product.
yyLeaving a fixed image on the screen for a long time may cause damage to the screen and cause image
burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize the residual
image prevention function on the product, and when the product is not used, turn off the power. Burn-in and
related problems are not covered by the warranty on this product.
yyDo NOT install this product on a wall where there is high risk of exposure to oil fumes or mist.
►This
►
may damage product and cause is to fail.
CAUTION
yyMake sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more than
10cm from the wall)
►If
► you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
yyDo not block the ventilation hole of the product by a tablecloth or curtain.
►The
►
product can be deformed or fire can break out due to overheating inside the product.
yyInstall the product on a flat and stable place that has no risk of dropping the product.
►If
► the product is dropped, you may be injured or the product may be broken.
yyInstall the product where no EMI occurs.
yyKeep the product away from direct sunlight.
►The
►
product can be damaged.
ENGLISH
ENG
SAFETY PRECAUTIONS
4
ENG
ENGLISH
If you install the product in a place that does not meet the recommended conditions, this may cause
yy
serious damage to the product's picture quality, life cycle and appearance. Please check with LG or
a qualified installer before installing. This caution applies to a place where there is an abundance of
fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity
is very high, or the product is likely to remain turned on for a long period of time (airport and train
station), failure to do so will invalidate the warranty.
Do not install the product in an area with poor ventilation (e.g.on a bookshelf, in a closet) or outside
yy
and avoid placing on cushions or carpets.
In addition, do not install it where there are heating objects such as lighting equipment.
yy
Precautions to the AC Adapter and Electrical Power
WARNING
yyIf water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter),
disconnect the power cord immediately and contact the service center.
►Otherwise,
►
this may cause a fire or electric shock due to damage to the product.
yyDo not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe
and dry them before use.
►Otherwise,
►
this may cause a fire or electric shock.
yyMake sure to completely insert the power cord into the AC adapter.
►If
► loosely connected, the poor connection may cause a fire or electric shock.
yyBe sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.
►The
►
use of non-approved products may cause a fire or electric shock.
yyWhen unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive
force.
►The
►
power line can be damaged, which may cause electric shock or fire.
yyBe careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC
adapter. Be careful not to damage the power cord or AC adapter with sharp objects.
►Damaged
►
power cords may cause a fire or electric shock.
yyNever disassemble, repair or modify the power cord or AC adapter.
►This
►
may cause a fire or electric shock.
yyMake sure to connect the power cable to the grounded current.
►You
►
may be electrocuted or injured.
yyUse the rated voltage only.
►The
►
product can be damaged, or you may be electrocuted.
yyIn the presence of thunder and lightning, never touch the power cord and signal cable because it can be
very dangerous.
►It
► can cause electric shock.
yyDo not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a
power bar with a grounding terminal designed for exclusive use with the computer.
►A
► fire can break out due to overheating.
yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the
power plug completely or wipe dust off.
►You
►
may be electrocuted due to excess moisture.
yyIf you don't intend to use the product for a long time, unplug the power cable from the product.
►Covering
►
dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
yyFix the power cable completely.
►If
► the power cable is not fixed completely, a fire can break out.
yyDo not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging
into the wall input terminal.
►You
►
may be electrocuted.
yyThe appliance coupler is used as the disconnect device.
yyPlease make sure the device is installed near the wall outlet to which it is connected and that the outlet is
easily accessible.
yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source
even if the unit is turned off.
5
CAUTION
►This
►
may cause a fire.
yyDo not unplug the power cord while the product is in use.
►Electrical
►
shock can damage the product.
yyUse only the power cord supplied with the unit. If you use another power cord, make sure that it is certified
by the applicable national standards when not provided by the supplier. If the power cable is faulty in any
way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.
Precautions in Moving the Product
WARNING
yyMake sure to turn off the product.
►You
►
may be electrocuted or the product can be damaged.
yyMake sure to remove all cables before moving the product.
►You
►
may be electrocuted or the product can be damaged.
yyMake sure the panel faces forward and hold it with both hands to move. If you drop the product, the
damaged product can cause electric shock or fire. Contact an authorized the service center for repair.
yyMake sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more
people to carry larger apparatus. Do not press against or put stress on the front panel of the apparatus.
CAUTION
yyDo not shock the product when moving it.
►You
►
may be electrocuted or the product can be damaged.
yyDo not dispose the product-packing box. Use it when you move.
Precautions in Using the Product
WARNING
yyDo not disassemble, repair or modify the product at your own discretion.
►Fire
►
or electric shock accident can occur.
►Contact
►
the service center for check, calibration or repair.
yyWhen the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
yyKeep the product away from water.
►Fire
►
or electric shock accident can occur.
yyDo not shock or scratch the front and sides of the screen with metallic objects.
►Otherwise,
►
it may cause damage to the screen.
yyAvoid high temperatures and humidity.
ENGLISH
ENG
yyBe sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc.
6
CAUTION
ENG
ENGLISH
yyDo not put or store inflammable substances near the product.
►There
►
is a danger of explosion or fire due to careless handling of the inflammable substances.
yyWhen cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching.
Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may
occur. (Do not use chemicals such as benzene, paint thinners or alcohol)
yyTake a rest from time to time to protect your vision.
yyKeep the product clean at all times.
yyTake a comfortable and natural position when working with a product to relax the muscles.
yyTake a regular break when working with a product for a long time.
yyDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a
scratch on it.
yyKeep the proper distance from the product.
►Your
►
vision may be impaired if you look at the product too closely.
yySet the appropriate resolution and clock by referring to the User’s Guide.
►Your
►
vision can be impaired.
yyUse authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)
►Product
►
can be deformed.
yyDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc.
on or over the apparatus(e.g. on shelves above the unit).
yyBatteries should not be exposed to excessive heat. For example, keep away from direct sunlight, open
fireplace and electric heaters.
yyDo NOT place non-rechargeable batteries in charging device.
yyUsing headsets (earphones) for a long time or listening loudly can cause damage to your hearing.
yySpray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too
much moisture may cause staining.
yyDo not use products using high voltage around the Monitor. (ex.Electrical Swatter)
►Monitor
►
may have malfunction as its electrical shock.
Mounting on a wall
Do not install this product by yourself. Contact the service technician qualified by the Manufacturer. It
yy
may cause injuries.
7
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
Card and book
NOTE
The accessories provided with your product may vary depending on the model or region.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
LVDS cable is optional and not provided with the product. Please refer to LVDS Pin Map Guide for
yy
the LVDS cable assembly.
This product is used as a built-in product installed inside of an enclosure and cooler.
yy
Long-term storage may cause staining on the extruded aluminum from oxidation.
yy
CAUTION
Do not use any unapproved or counterfeit parts or accessories to ensure the safety and product life
yy
span.
Any damages or injuries by using unapproved items are not covered by the warranty.
yy
ENGLISH
ENG
INSTALLATION PREPARATION
8
Mounting Holes
ENG
ENGLISH
CAUTION
This product has the front and back sides. Make sure the product is installed with the front side
yy
facing forward.
Image is displayed reversely on the back side.
yy
47WFB
Use M3 screws to mount the monitor. There are 16 positions for screws on the rear side of the product.
< Front of the product >
< Rear of the product >
9
49WFB
< Front of the product >
< Rear of the product >
ENGLISH
ENG
Use M3 screws to mount the monitor. There are 8 positions for screws on the rear side of the product.
10
55WFB
ENG
ENGLISH
Use M3 screws to mount the monitor. There are 8 positions for screws on the rear side of the product.
< Front of the product >
< Rear of the product >
11
Portrait Layout
47/55WFB
49WFB
CAUTION
The scaler board is optional and it is not part of the product.
yy
ENGLISH
ENG
To install in portrait mode, rotate the set clockwise 90 degrees when looking at from the front.
The portrait mode is only available on the scaler board. (The scaler board should support portrait mode.)
12
Storage Method for Panel Protection
ENG
ENGLISH
Correct Method
Panel
Incorrect Method
Cushion
Panel
When laying the product on a flat floor, pit it face
down on a cushion or blanket to prevent scratching and damage.
If the product is tilted onto the bezel, the bottom of
the panel may be damaged.
Panel
If there is no a cushion or a soft cloth available,
ensure the floor is clean. Then lay the product
down carefully with the panel facing either upward
or downward. At this time, make sure that no
object falls on the panel.
Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.
13
Installing an LVDS Cable
The LVDS cable port is located as shown in the figure below.
When installing the product, make sure there is enough space to install the LVDS cable.
47/55WFB
297 mm
LVDS Cable (not included)
26 mm
38 mm
49WFB
LVDS Cable (not included)
26 mm
297 mm
38 mm
NOTE
LVDS cable is optional and not provided with the product.
yy
CAUTION
Connect the cable when the scaler board is off.
yy
Make sure to connect the cable correctly.
yy
ENGLISH
ENG
PRODUCT INSTALLATION
14
47/55WFB LVDS connection
ENG
ENGLISH
1Place a soft cloth on the table and put the set on it as illustrated.
2Put a LVDS cable in a holder. Cable head has to be properly oriented.
CAUTION
To prevent the cable from being separated, you must use a holder.
yy
Check the direction of the LVDS cable to prevent damage to the cable.
yy
15
3Attach LVDS cable and holder to the set with two screws. (These screws are included with TSP500-M.)
ENGLISH
ENG
4Cable head has to be toward set back. (Label is located on set back.)
CAUTION
To prevent the cable from being separated, you must use a holder.
yy
Check the direction of the LVDS cable to prevent damage to the cable.
yy
16
49WFB LVDS connection
ENG
ENGLISH
1Place a soft cloth on the table and put the set on it as illustrated.
2Put a LVDS cable in a holder. Cable head has to be properly oriented.
CAUTION
To prevent the cable from being separated, you must use a holder.
yy
Check the direction of the LVDS cable to prevent damage to the cable.
yy
17
3Attach LVDS cable and holder to the set with two screws. (These screws are included with TSP500-M.)
ENGLISH
ENG
4Cable head has to be toward set back. (Label is located on set back.)
CAUTION
To prevent the cable from being separated, you must use a holder.
yy
Check the direction of the LVDS cable to prevent damage to the cable.
yy
18
TSP500-M LVDS connection
ENG
ENGLISH
1 Unscrew two screws to assemble LVDS cable and holder. Don’t throw away the screws.
2Put a LVDS cable in a holder. Cable head has to be properly oriented.
CAUTION
To prevent the cable from being separated, you must use a holder.
yy
Check the direction of the LVDS cable to prevent damage to the cable.
yy
19
3Attach LVDS cable and holder to TSP500 with two screws saved in step 1.
ENGLISH
ENG
CAUTION
To prevent the cable from being separated, you must use a holder.
yy
Check the direction of the LVDS cable to prevent damage to the cable.
yy
20
Lighting Installation
ENG
ENGLISH
This product must be installed with backlighting.
Lighting must be installed behind the product so that the display can be seen clearly.
600 lux or more
(When the Full Screen
is White.)
Lighting
If something obstructs the backlighting, additional lighting may be required.
Additional lighting
600 lux or more
(When the Full Screen
is White.)
Object
Lighting
Additional lighting
21
Installation in Enclosure
ENGLISH
ENG
Install the product in the enclosure. Wear working
gloves when installing the product. Do not use bare
hands. Otherwise, it may cause personal injury.
1Place the product in the enclosure.
2Attach the product using the prepared screw
holes and an additional enclosure guide frame.
<Example of the product in the enclosure>
NOTE
This product can be installed in various
yy
locations besides the enclosure.
CAUTION
The panel of this product is so thin that it
yy
can be easily broken when it is exposed to
the outside. Use a clear protective cover
to keep the product from exposure to the
elements.
When installing the product in its
yy
housing,make sure that the framework of
the product is grounded. (This helps prevent
the product being damaged in the event of
thunder and lightning.)
<Example of the lighting installation>
Lighting must be installed in the enclosure.
22
Precaution
ENG
ENGLISH
Correct Method
Incorrect Method
Do not hold the screen area when holding the
product.
Do not lift up the product by holding a corner.
CAUTION
Use a soft cloth moistened with n-hexane to
remove dust or stains on the screen.
CAUTION
If a fixed image displays on the screen for a
yy
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and
not covered by the warranty.
To prevent image sticking, do not play a still
yy
image for more than two hours.
Recommended operation time for optimum
yy
performance and reliability is 12 hours or
less per day.
Make sure the power is disconnected before
yy
moving or installing the product. Otherwise
electric shock may occur.
Wear working gloves when installing the
yy
product. Do not use bare hands. Otherwise,
it may cause personal injury.
If you install the product on a ceiling or
yy
slanted wall, it may fall and result in severe
injury.
Do not fasten the screws too tightly; this
yy
may cause damage to the product and void
your warranty.
Use M3 x L4 screws to mount the monitor.
yy
Any damages or injuries caused by misuse
or use of improper accessories are not
covered by the warranty.
23
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
yy When a dark image is displayed on the screen after an image with
high contrast (black and white or gray), this may cause image sticking.
This is normal for LCD screen.
Screen color is abnormal.
Problem
creen color is unstable or
S
mono-colored.
Do black spots appear on the
screen?
Resolution
yy Check the connection status of the LVDS cable.
yy Check whether the LVDS cable is connected correctly following the
LVDS Pin Map Guide.
yy Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
ENGLISH
ENG
TROUBLESHOOTING
24
ENG
ENGLISH
SPECIFICATIONS
47WFB
Screen type
Liquid Crystal Display (LCD) Screen
Dimension (W x H x D)
1176.58 mm x 645.02 mm x 11.2 mm
Pixel Pitch
0.5415 mm x 0.5415 mm
Pixel Format
1920 horiz. by 1080 vert. Pixels, RGB stripe arrangement
Color Depth
8Bit (D), 16.7 Million colors
Transmittance (With POL)
6.4 % (Typ.)
Viewing Angle (CR>10)
Viewing angle free ( R/L 178 (Min.), U/D 178 (Min.))
Power Consumption
Total 6.1 W (Typ.)
Weight (head)
4.5 kg
Display Operating Mode
Transmissive mode, Black screen by default
Surface Treatment (Top)
Hard coating (3H), Anti-glare treatment (Reflectance < 2 %)
Possible Display Type
Landscape and Portrait Enabled
49WFB
Screen type
Liquid Crystal Display (LCD) Screen
Dimension (W x H x D)
1222.34 mm x 690.8 mm x 11.2 mm
Pixel Pitch
0.5593 mm x 0.5593 mm
Pixel Format
1920 horiz. by 1080 vert. Pixels, RGBW stripe arrangement
Color Depth
10Bit (D): 1070 Million colors, 8Bit (D): 16.7 Million colors
Transmittance (With POL)
9.5 % (Typ.)
Viewing Angle (CR>10)
Viewing angle free ( R/L 178 (Min.), U/D 178 (Min.))
Power Consumption
Total 5.4 W (Typ.)
Weight (head)
5.4 kg
Display Operating Mode
Transmissive mode, Black screen by default
Surface Treatment (Top)
Hard coating (2H), Anti-glare treatment (Reflectance < 2 %)
Possible Display Type
Landscape and Portrait Enabled
55WFB
Screen type
Liquid Crystal Display (LCD) Screen
Dimension (W x H x D)
1331.1 mm x 786.7 mm x 11.2 mm
Pixel Pitch
0.210 mm x 0.630 mm
Pixel Format
1920 horiz. by 1080 vert. Pixels, RGBW stripe arrangement
Color Depth
8Bit (D), 16.7 Million colors
Transmittance (With POL)
10.0 % (Typ.)
Viewing Angle (CR>10)
Viewing angle free ( R/L 178 (Min.), U/D 178 (Min.))
Power Consumption
Total 5.52 W (Typ.)
Weight (head)
6.6 kg
Display Operating Mode
Transmissive mode, Black screen by default
Surface Treatment (Top)
Hard coating (2H), Anti-glare treatment (Reflectance : 1.5 %)
Possible Display Type
Landscape and Portrait Enabled
25
3
3
47WFB
1176.58
130
130
130
130
11.2
222.1
130
110
60
100.91
130
16-M3 Tap Hole
62
124.11
108
130
645.02
109.6
354.24
446.34
ENGLISH
ENG
(Unit : mm)
100
130
130
100
100
168.35
122.8
100
130
100
690.8
130
8-M3 Tap Hole
100
198.35
100
158
100
ENG
ENGLISH
786.7
26
49WFB
1222.34
11.2
55WFB
1331.1
11.2
8-M3 Tap Hole
27
ENGLISH
ENG
LVDS PIN MAP GUIDE
47/49/55WFB LVDS connector: DD4RA40JA1 or equivalent
yy
LVDS cable connector: DD4PA40MA1 or equivalent
yy
Cable specification: Coaxial cable or twisted pair cable 1 meter long or shorter
yy
Pin No.
Symbol
1
VLCD
Power Supply+12.0V
Description
1
2
VLCD
Power Supply+12.0V
1
3
VLCD
Power Supply+12.0V
1
4
VLCD
Power Supply+12.0V
1
5
GND
Ground
6
GND
Ground
7
R2DP
Second LVDS receiver signal (D+)
8
GND
Ground
Second LVDS receiver signal (D-)
9
R2DN
10
R2CLKP
11
GND
12
R2CLKN
13
R2CP
Second LVDS receiver signal (C+)
14
GND
Ground
15
R2CN
Second LVDS receiver signal (C-)
16
R2BP
Second LVDS receiver signal (B+)
17
GND
Ground
18
R2BN
Second LVDS receiver signal (B-)
19
R2AP
Second LVDS receiver signal (A+)
20
GND
Ground
21
R2AN
Second LVDS receiver signal (A-)
22
GND
Ground
23
R1DP
First LVDS receiver signal (D+)
24
GND
Ground
25
R1DN
First LVDS receiver signal (D-)
26
R1CLKP
27
GND
28
R1CLKN
29
R1CP
First LVDS receiver signal (C+)
30
GND
Ground
31
R1CN
First LVDS receiver signal (C-)
32
R1BP
First LVDS receiver signal (B+)
33
GND
Ground
34
R1BN
First LVDS receiver signal (B-)
Second LVDS receiver clock signal (+)
Ground
Second LVDS receiver clock signal (-)
First LVDS receiver clock signal (+)
Ground
First LVDS receiver clock signal (-)
NOTE
28
ENG
ENGLISH
Pin No.
Symbol
35
R1AP
First LVDS receiver signal (A+)
Description
36
GND
Ground
37
R1AN
First LVDS receiver signal (A-)
38
GND
Ground
39
NC
40
LVDS Select
No Connection
H' = JEIDA, 'L' = VESA
Note: 1. All VLCD (power input) pins should be connected together.
2. All Input levels of LVDS signals are based on the EIA 644 Standard.
NOTE
Make sure to read the Safety Precautions
before using the product.
The model and serial numbers of the SET are
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Temporary noise is normal when powering ON or
OFF this device.
Download PDF