LG | 55WV70BS-B | LG 55WV70BS-B Owner’s Manual

ENG
ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating your set and retain it
for future reference.
MONITOR SIGNAGE MODELS
55WV70MS
55WV70BS
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
4
LICENSES
21
- Customizing sound options
21
Using additional options
21
- Adjusting aspect ratio
23
- Using the input list
5
ASSEMBLING AND
PREPARING
5
Accessories
24 ENTERTAINMENT
6
Parts
7
To install in a Portrait Layout
24
- Connecting to a wired network
7
Remove L-brackets before Installation
25
- Network Status
8
STORAGE METHOD FOR PANEL
26
- Connecting USB storage devices
27
- Browsing files
29
- Viewing movies
32
- Viewing photos
35
- Listening to music
37
- Viewing the Contents List
38
- DivX® VOD Guide
39
- Using PIP/PBP
PROTECTION
8
- Correct Method
8
- Incorrect Method
9
Installing on a wall
10
EXTERNAL EQUIPMENT SETUP
10
- IR RECEIVER
11
Tiling Displays
11
- How to Mount the Set
12
- How to Join Sets
13 REMOTE CONTROL
15
Displaying the device name connected to
an input port
16 USING THE MONITOR SET
40 CUSTOMIZING SETTINGS
40
Accessing the main menus
41
- PICTURE settings
44
- AUDIO settings
45
- TIME settings
46
- OPTION settings
51
Picture ID
52
- NETWORK settings
16
Connecting to a PC
16
- RGB connection
53 MAKING CONNECTIONS
17
- DVI connection
17
- HDMI connection
54
18
- Display Port connection
18
- IR Receiver connection
19
Adjusting the screen
19
- Selecting an image mode
19
- Customizing image options
20
- Customizing PC display options
20
Adjusting the sound
20
- Selecting an sound mode
Connecting to a HD receiver, DVD,
Camcorder, Camera, Gaming Device or
VCR player
54
- DVI connection
54
- HDMI connection
55
- Component connection
55
- AV(CVBS) connection
56
Connecting to the LAN
56
- LAN connection
TABLE OF CONTENTS
Connecting to a USB
57
Daisy Chain Monitors
57
- RGB Cable
57
- DVI Cable
58 TROUBLESHOOTING
61 SPECIFICATIONS
63 IR CODES
64 CONTROLLING THE MULTIPLE
PRODUCT
64
Connecting the cable
64
RS-232C Configurations
64
Communication Parameter
65
Command reference list
67
Transmission / Receiving protocol
ENG
ENGLISH
56
3
4
LICENSES
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Videoon-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
ASSEMBLING AND PREPARING
5
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
CD (Owner's Manual, SuperSign
Elite-w Program/SuperSign
Manual) / Card
Power Cord
RGB Cable
DVI Cable
RS-232C Cable
Tiling Guide
(4ea)
POWER
ENERGY
MONITOR
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
S.MENU
IR Receiver
OK
BACK
TILE
EXIT
ID
ON
OFF
Remote Control and Batteries
M4 x 6L
Screws (8ea)
M6
Screws (4ea)
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
ENG
ENGLISH
ASSEMBLING AND PREPARING
6
ASSEMBLING AND PREPARING
Parts
ENGLISH
ENG
USB
DP
/DVI
DVI IN
DVI OUT
RGB
/COMPONENT OUT
AUDIO
IN
LAN
COMPOSITE
RGB
/COMPONENT IN
REMOTE
CONTROL IN
Connection panel (See p.54 to p.56)
SPEAKER
ASSEMBLING AND PREPARING
7
To install in a Portrait Layout
Remove L-brackets before Installation
Remove the L-brackets from each corner of the monitor before installing it.
NOTE
Keep the removed L-brackets and use them when moving the monitor later.
yy
ENG
ENGLISH
When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
8
ASSEMBLING AND PREPARING
STORAGE METHOD FOR PANEL PROTECTION
ENGLISH
ENG
Correct Method
Incorrect Method
Panel
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully
for. Do not let the panel not to touch the floor.
Panel
If the product is tilted onto the bezel, the bottom of
the panel may be damaged.
Cushion
Panel
When laying down the product, lay a cushion on a
flat floor. Put the product on it with the panel of
the product facing down.
Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.
If there is not a cushion available, ensure the floor
is clean and then lay the product down carefully
with the panel facing either upward or downward.
At this time, be careful for objects not to fall on the
panel.
ASSEMBLING AND PREPARING
Installing on a wall
CAUTION
10 cm
20 cm
10 cm
10 cm
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation.
Use the wall mount plate and screws that comply
with the VESA standard.
NOTE
Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in a
closet) or on a carpet or cushion. If there is
no other option but to mount the product on
the wall, make sure that sufficient ventilation
is provided before installation.
- Failure to do so may result in a fire due to
the increase in the internal temperature.
Disconnect the power cord first, and then
yy
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
yy
slanted wall, it may fall and result in severe
injury.
Do not over tighten the screws as this may
yy
cause damage to the Monitor set and void
your warranty.
Use the screws and wall mounts that
yy
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
ENG
ENGLISH
To install the Monitor on a wall (optional),
use the VESA screws provided as accessories to
fasten it.
Please refer to p11 on How to Mount the Set.
10 cm
9
10
ASSEMBLING AND PREPARING
EXTERNAL EQUIPMENT SETUP
ENGLISH
ENG
IR RECEIVER
This allows a remote control sensor to be placed
in a custom location. Then that display can control
other displays via an RS-232C cable.
AUDIO
IN
REMOTE
CONTROL IN
ASSEMBLING AND PREPARING
11
Tiling Displays
ENG
ENGLISH
How to Mount the Set
*Example of 2 x 2 tiling
* Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.
Screws for attaching the
VESA wall mount
<Rear view of the set with the wall mount plate>
* The wall mount plate is shaded in gray in the illustration to help you see it.
12
ASSEMBLING AND PREPARING
How to Join Sets
ENGLISH
ENG
1
Join other sets using screws for fixing the VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to adjust the gap between the sets.
3 Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
NOTE
The load applied to each set should be supported by the wall mount plate or the wall using a VESA
yy
wall mount (600 x 400).
The load applied to each set should be supported by the wall mount plate using a VESA wall mount.
yy
(Each set must be firmly mounted to the wall mount plate or the wall.)
You may mount the set without using the tiling guide; this does not affect the performance of the
yy
device.
13
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control to the
yy
remote control sensor on the Monitor set.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
1
4
7
.,!
GHI
PQRS
1/a/A
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
ENERGY SAVING( )
Adjusts the brightness of
the screen to reduce energy
consumption.
/ I (POWER)
Turns the Monitor set on or off.
Monitor On / Off
Turn off the monitor and then
turn it back on.
POWER
ARC
Selects the Aspect Ratio
Mode.
ENERGY
MONITOR
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
Number and Alphabet buttons
Enters numerical or alphabetical
characters depending on the
setting.
DEF
MNO
WXYZ
CLEAR
Deletes the entered numerical
or alphabetical character.
MARK
Volume Up / Down
Adjusts the volume level.
ARC
PSM
PSM
Selects the Picture Status
Mode.
INPUT
Selects the input mode.
INPUT
OFF
ON
1/a/A Button
Toggles between numerical
and alphabetical.
OFF
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
S.MENU
MUTE
Mutes all sounds.
OK
BACK
ID
TILE
EXIT
Brightness Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to
move to the next file list.
ENG
ENGLISH
REMOTE CONTROL
14
REMOTE CONTROL
ENGLISH
ENG
POWER
ENERGY
MONITOR
INPUT
OFF
ON
1
4
7
.,!
GHI
PQRS
1/a/A
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
POWER
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
S.MENU
OK
ENERGY
MONITOR
MENU (See p.40)
Accesses the main menus
or saves your input and exit
menus.
.,!
GHI
PQRS
1/a/A
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
ARC
Navigation buttons
Scrolls through menus or
options.
PSM
P
BRIGHT A
NESS G
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
E
MUTE
MENU
OK
Selects menus or options and
confirms your input.
ID ON/OFF
When the number of Picture
ID is equal to Set ID you can
control the monitor which
you want in the multi display
condition.
EXIT
OFF
SAVING
MARK
BACK
Allows the user to move back
one step in user interaction
function.
TILE
ID
ON
OFF
ON
BACK
INPUT
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
TILE
ID
ON
OFF
EXIT
EXIT
Clears all on-screen displays
and returns to Monitor set
viewing from any menu.
TILE
Selects the TILE Mode.
USB Menu control buttons
Controls media playback.
OFF
ON
OFF
ON
SAVING
SAVING
REMOTE
CONTROL
1/a/A
1/a/A
CLEAR
CLEAR
Displaying the device name connected to an input port
.,!
ABC
DEF
.,!
ABC
DEF
GHI
JKL
MNO
GHI
JKL
MNO
PQRS
TUV
WXYZ
PQRS
TUV
WXYZ
-*#
-*#
MARK
MARK
ARC
ARC
BRIGHT
NESS
P
A
G
E
MUTE
Display which devices are connected to which
external input ports.
AUTO
MENU
S.MENU
1 Access the Input list screen and press the blue
(input label) button onOKthe remote control.
BACK
TILE
EXIT
ID
ON
OFF
2 You can assign an input label for every input
except USB.
Input Label
AV
Component
RGB
HDMI
DVI-D
Display Port
Close
PSM
P
BRIGHT A
NESS G
E
MUTE
NOTE
MENU
AUTO
S.MENU
External inputs supported: AV, Component,
yy
RGB, HDMI, DVI-D, Display Port
Labels available : VCR,
DVD, Set top box,
yy
OK
Satellite, Game, PC, Blue-ray, HD-DVD
The input labels are displayed on the Input
yy
Label screen or at the top left of the screen
EXIT
BACK
TILE
when you change
the
external
input setting.
ID
For DTV/PC-compatible
signals, such as
yy
OFF
ON
1080p 60 Hz, the screen settings may
change according to the input label. The Just
Scan option is available if a PC is connected
as an external device.
ENG
ENGLISH
PSM
15
16
USING THE MONITOR SET
ENGLISH
ENG
USING THE MONITOR SET
Connecting to a PC
RGB connection
Your Monitor set supports the Plug & Play* feature.
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the 15 pin signal cable as shown the
following illustrations.
Select RGB input.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
Back of the product.
AUDIO
RGB
/COMPONENT OUT
NOTE
IN
RGB
/COMPONENT IN
REMOTE
It is recommended to use the Monitor set
yy
with the HDMI connection for the best image
quality.
To comply with the specifications of the
yy
product, use a shielded interface cable with
ferrite core, such as D-sub 15 pin cable and
DVI/HDMI cable provided with the product.
If you turn the Monitor set on when the set
yy
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
CONTROL IN
Macintosh Adapter
(not included)
(not included)
PC/MAC
PC
CAUTION
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
yy
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
U se the standard Macintosh
yy
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
USING THE MONITOR SET
HDMI connection
Transmits digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the DVI cable as shown the following
illustrations.
Select DVI input.
Transmits digital video and audio signals from your
PC to the Monitor set. Connect the PC and the
Monitor set with the HDMI cable as shown in the
following illustrations.
Select HDMI input.
IN
DVI IN
DVI IN
AUDIO
IN
Back of the product.
AUDIO
IN
/DVI
IN
REMOTE
REMOTE
/DVI
IN
DP
DP
AUDIO
REMOTE
IN
CONTROL IN
CONTROL IN
CONTROL IN
ENG
ENGLISH
DVI connection
Back of the product.
AUDIO
17
REMOTE
CONTROL IN
(not included)
(not included)
PC
PC
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode.
Some PCs require you to manually change
the default audio output to HDMI.
If you want to use HDMI-PC mode, you
yy
must set the input label to PC mode.
When HDMI PC is used, a compatibility
yy
problem could occur.
PC
18
IN
ENGLISH
ENG
UDIO
USING THE MONITOR SET
Display Port connection
IR Receiver connection
Transmits digital video and audio signals from
your PC to the Monitor. Connect the PC and the
Monitor with the Display Port cable as shown in
the following illustrations.
Select Display Port
/DVI
IN input source.
Allows the use of a wired remote or IR receiver
extension.
MOTE
DP
AUDIO
IN
Back of the product.
NTROL IN
Back of the product.
DP
/DVI
IN
AUDIO
IN
REMOTE
CONTROL IN
(not included)
PC
NOTE
Sound may not be available depending on
yy
the DP version of your PC.
REMOTE
CONTROL IN
USING THE MONITOR SET
Customizing image options
Selecting an image mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images in its optimized settings by
selecting one of the preset image modes.
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Mode
Description
Vivid
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for the normal
environment.
Cinema
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and
dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast
gaming screen such as PCs or games.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Description
Backlight
djusts the brightness of the screen
A
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright part of the
picture is saturated.
Brightness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark part of the picture is
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Customizes the advanced options.
Refer to the Advanced image options.
Control
Picture Reset
Restores the options to the default
setting.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
Adjusting the screen
19
20
USING THE MONITOR SET
ENGLISH
ENG
Customizing PC display options
Adjusting the sound
Customize options of each image mode for the
best image quality.
This function works in the following mode:
yy
RGB[PC] mode.
Selecting an sound mode
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
2 Press the Navigation buttons to scroll to
3 Press the Navigation buttons to scroll to
3 Press the Navigation buttons to scroll to Sound
4 Select and adjust following options, and then
4 Press the Navigation buttons to scroll to a
PICTURE and press OK.
Screen and press OK.
press OK.
Option
Description
Resolution
Selects a proper resolution. See
“Customizing PC display options”.
Auto
Config.
Sets to adjust the screen position, clock,
and phase automatically.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Play the sound in its optimized settings by
selecting one of the preset sound modes.
AUDIO and press OK.
Mode and press OK.
sound mode you want and press OK.
Mode
Description
Standard
Select when you want standard-quality
sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sports
Select when you watch sports events.
Game
Select when you play games.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
USING THE MONITOR SET
21
Using additional options
Customize options of each sound mode for the
best sound quality.
Adjusting aspect ratio
1 Press MENU to access the main menus.
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
Monitor set.
2 Press the Navigation buttons to scroll to
AUDIO and press OK.
3 Press the Navigation buttons to scroll to Sound
Mode and press OK.
4 Press the Navigation buttons to scroll to a
sound mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Description
Infinite
LG's Infinity Sound option provides 5.1
Sound
channel stereo sound quality from two
CAUTION
If a fixed image displays on the screen for a
yy
long period of time, it could be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
yy
period of time, image burn may occur on the
letterboxed area of the screen.
speakers.
Treble
Increases the intensity of the high
NOTE
frequency part of audio.
Bass
Increases the intensity of the low
frequency part of audio.
Reset
Resets the sound mode to the default
You can also change the image size by
yy
accessing the main menus.
setting.
MODE AV Component RGB
Display
DVI-D
HDMI
Port
ARC
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
PC
DTV
PC
PC
DTV
PC
o
o
o
o
o
o
o
x
o
x
x
o
x
x
o
x
o
o
x
o
o
o
o
o
o
o
o
o
o
o
x
o
x
x
o
x
o
o
x
o
x
x
o
x
16:9
o
o
Just Scan
x
1:1
x
4:3
Zoom
Cinema
Zoom
ENG
ENGLISH
Customizing sound options
22
USING THE MONITOR SET
ENGLISH
ENG
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
- Cinema Zoom : Choose Cinema Zoom when
you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
USING THE MONITOR SET
23
Using the input list
1 Press INPUT to access the input source list.
2 Press the Navigation buttons to scroll to one of
the input sources and press OK.
Input source
Description
AV
Watch video from a VCR or other
external devices.
Component
Watch the content from a DVD or
other external devices, or through a
digital set-top box
RGB
View a PC display on the screen
DVI-D
View a PC display on the screen
HDMI
Watch contents from a PC, DVD
of Digital set-top box other high
definition devices
Display Port
Watch contents in a PC, DVD
of Digital set-top box other high
definition devices
ENG
ENGLISH
Selecting an input source
24
ENTERTAINMENT
ENGLISH
ENG
ENTERTAINMENT
Connecting to a wired network
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustration and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of networks may require the display network settings to be adjusted. For most networks,
the display will connect to automatically without
any adjustments.
For detail information, contact your internet provider or router manual.
To set up the network settings: (Even if your display has already connected automatically, running
setup again will not harm anything),
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Setting and press OK.
4 If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
LAN
Router
Router
@
LAN
Cable modem
Internet
Internet
WAN
-If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses will need to be input manually.
-IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
ETHERNET
Cable modem
CAUTION
yy
Do not connect a modular phone cable to
the LAN port.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
yy
Network setting menu will not be available until the display connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENTERTAINMENT
NOTE
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits sub-scription to one device, this display
may not be allowed to connect when a PC is
already connected.)
yy
The use of a “Router” may not be allowed or its
usage may be limited depending on the policies and restrictions of your ISP. For details,
contact your ISP directly.
Tips for Network setting
yy
Use a standard LAN cable with this display.
Cat5 or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
network, quickly power off and/or disconnect
the power cable of the network router or cable
modem. Then power on and/or connect the
power cable again.
yy
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable terms of service. For details, contact your
ISP.
yy
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow
for such a connection, you will not be able to
connect the display.
Network Status
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after setting the network.
Return to the previous menu.
ENG
ENGLISH
yy
If you want to access the Internet directly on
your display, the internet connection should
always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yy
If you do not complete the network settings,
the network may not work properly.
25
26
ENTERTAINMENT
Connecting USB storage devices
ENGLISH
ENG
Connect USB storage devices such as a USB
flash memory, external hard drive to the display
and use multimedia features (See "Browsing files"
on page 27).
Connect a USB flash memory or USB memory
card reader to the Display as shown on the following illustration. The My media screen appears.
Tips for using USB storage devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition program may not be recognized.
yy
A USB storage device which uses its own
driver may not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
or
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
yy
Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files or movie files.
yy
Please use only a USB storage device which
was formatted as a FAT32 file system, NTFS
CAUTION
yy
Do not turn the display off or remove a USB
storage device while EMF(my media) Menu
is activated, as this could result in loss of
files or damage to the USB storage device.
yy
Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
file system provided with the Windows operating system. In case of a storage device
formatted as a different utility program which
is not supported by Windows, it may not be
recognized.
yy
Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable offered by the device maker.
yy
Some USB storage devices may not be supported or operated smoothly.
yy
File alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
27
ENTERTAINMENT
yy
Be sure to back up important files since data
damaged. We will not be responsible for any
data loss.
yy
If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
yy
If your USB memory device has multiple
Browsing files
Access the photo, music, or movie lists and browse
files.
1 Connect a USB storage device.
2 Press MENU to access the main menus.
3 Press the Navigation buttons to scroll to My
Media and press OK.
4 Press the Navigation buttons to choose
from Movie List, Photo List, Music List or
Contents List and press OK.
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
yy
If a USB memory device is connected to a
Movie List
Photo List
Music List
Contents List
USB multi-card reader, its volume data may
not be detected.
properly, disconnect and reconnect it.
2
1
yy
If the USB memory device does not work
Page 1/1
Photo List
USB External
Drive1
Page 1/1
4
yy
How fast a USB memory device is detected
differs from device to device.
yy
If the USB is connected in Standby Mode,
001
002
010
011
003
004
005
006
012
013
014
015
007
008
009
5
specific hard disk will automatically be
loaded when the display is turned on.
yy
The recommended capacity is 1 TB or less
Move
To Music List
for a USB external hard disk and 32 GB or
Change Numbers
View
Mark Mode
P
Page Change
Exit
3
less for USB memory.
yy
Any device with more than the recommended
capacity may not work properly.
yy
If a USB external hard disk with a “Energy
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy
Maximum of 999 folders or files can be recognized under one folder.
yy
A USB 3.0 storage device may not work.
No.
Description
1
Moves to upper level folder
2
Current page/Total pages
3
Corresponding buttons on the
remote control
4
Current page/ total pages of contents
under the folder focused on 1
5
Contents under the folder focused on 1
Button
Description
Green
button
Press the green button to toggle between
Photo List -> Music List, Music List ->
Contents List, Contents List -> Movie
List or Movie List -> Photo List.
Yellow
button
A method to view in 5 large thumbnail or
simple list.
Blue
button
Convert to Mark Mode.
ENG
ENGLISH
stored in a USB memory device may be
28
ENTERTAINMENT
Supported file format
ENGLISH
ENG
Type
Movie
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Video format : DivX 3.11, DivX4, DivX5. DivX6
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Photo
File Extensions : *.cts/ *.cse
Movie
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX4, DivX5. DivX6
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03,Xvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
Audio format: MP2,MP3,Dolby Digital, LPCM,
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
File
Item
Profile
Extensions
Photo JPEG
Bit rate : within 32 kbps to 320 kbps(MP3)
JPG
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
BMP
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files)
JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
y y You can play JPEG files only.
y y Non-supported files are displayed in the form
of predefined icon.
File
Item
Profile
Extensions
jpeg
jpg
jpe
supported
file format
photo size
SOF0: baseline
SOF1: Extend
Sequential
SOF2:
Progressive
Min: 64 x 64
Max-Normal
Type:
15360 (W) x
8640 (H)
Progressive
Type:
1920 (W) x 1440
(H)
Music
Content
(when
using
SuperSign
Manager)
MP3
Bit rate 32 to 320
y y Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
y y Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
y y Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
supported
file format
PNG
Photo size
Music MP3
Bit rate
Sampling
rate
SOF0: baseline
SOF1: Extend
Sequential
SOF2:
Progressive
Min: 64 x 64
Max Type:
1366 x 768
32 kbps to 320
kbps
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
ENTERTAINMENT
Viewing movies
29
5 Play a movie.
1 Press the Navigation buttons to scroll to My
Media and press OK.
NOTE
yy
Non-supported files are displayed the preview
image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
2 Press the Navigation buttons to scroll to Movie
List and press OK.
3 Press the Navigation buttons to scroll to a
6 Control playback by using the following buttons.
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
01:02:30 / 02:30:25
Page 1/1
Movie List
MENU
Drive1
USB1 USB Drive
001
002
005
006
Move
Play
P
Page Change
Exit
Mark Mode
Page 1/1
Movie List
Mark Mode
Drive1
USB1 USB Drive
001
002
005
006
Exit
004
003
Change Numbers
Hide
Page 1/1
Button
To Photo list
Option
Page 1/1
003
004
051. Apple_ ......
02:30:25
r
Description
Stops the playback
s
Plays a video
t
Pauses or resumes the playback
v
Scans backward in a file
w
MENU
Scans forward in a file
HIDE
Hide the menu on the full-sized screen.
EXIT
Return to Movie List.
Skips to specific points in a file dur-
Show the Option menu.
ing playback. The time of a specific
Move
Play Marked
Menu
Mark All
Unmark All
Mark
Exit Mark Mode
P
Page Change
Exit
Description
Play Marked
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Mark All
Mark all movie files on the screen.
Unmark All
Deselect all marked movie files.
Exit Mark
Mode
Exit the Mark Mode.
< or >
point will appear on the status bar. In
some files, this function may not work
properly.
Press the ENERGY SAVING button
ENERGY
SAVING(
)
repeatedly to increase the brightness
of your screen.
ENG
ENGLISH
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
30
ENTERTAINMENT
Tips for using playing video files
ENGLISH
ENG
yy
Some user-created subtitles may not work
properly.
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
Movie files produced with some encoders
may not be played correctly.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
Videos with resolutions higher than
1920X1080@25/30P may not work properly
depending on the frame.
yy
Movie files other than the specified types and
formats may not work properly.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yy
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
not supported for playback.
yy
A DivX movie file and its subtitle file must be
located in the same folder.
yy
A video file name and its subtitle file name
must be identical for it to be displayed.
yy
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
yy
Files encoded with GMC(Global Motion
Compensation) may not be played.
yy
When you are watching the movie by Movie
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Video options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
yy
When replaying the video file after stopping,
you can play from where it stopped previously.
ENTERTAINMENT
When you select the Set Video Play,
German, Italian, Portuguese,
the Picture Size, Audio Language, Subtitle
Language or Repeat.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
Support Language
English, Spanish, French,
Danish, Romanian, Norwegian,
Albanian, Gaelic, Welsh, Irish,
Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Latin2
Slovak, Slovenian, Serbian,
Hungarian
Menu
Picture Size
Description
Selects your desired picture
Audio
format during movie play.
Changes the Language Group of the
Language
audio during movie play. Files
with a single audio track cannot be
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Greek
Greek
Turkish
Turkish
Korean
Korean
selected.
Subtitle
Turn on/off the subtitle.
Language
Language
Activated for SMI subtitle and
can select the language within the
subtitle.
Code Page
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Sync
Adjusts the time synchronization of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
Position
Changes the position of the
subtitle either up or down during
movie play.
Size
Selects your desired Subtitle size
during movie play.
Repeat
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
is turned off, it can run the playback if
the file name is similar to the previous
file.
NOTE
yy
Only 10,000 of sync blocks can be supported
within the subtitle file.
yy
When playing a video, you can adjust the
Picture Size by pressing the ARC button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
ENG
ENGLISH
1 Press the Navigation buttons to scroll to show
Code Page
Latin1
31
32
ENTERTAINMENT
When you select the Set Video,
ENGLISH
ENG
1 Press the Navigation buttons to scroll to make
appropriate adjustments.
Page 1/1
Photo List
USB1 USB Drive
001
Drive1
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
When you select the Set Audio,
View
Move
Change Numbers
To Music List
009
P
Page Change
Exit
Mark Mode
1 Press the Navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
008
007
Page 1/1
Photo List
Mark Mode
USB1 USB Drive
Drive1
Page 1/1
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
011
003
004
005
006
012
013
014
015
Mark
Move
Viewing photos
View Marked
Mark All
Unmark All
008
007
Exit Mark Mode
009
P
Page Change
Exit
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
View Marked
Display the selected photo file.
1 Press the Navigation buttons to scroll to My
Mark All
Mark all photo files on the screen.
Unmark All
Deselect all marked photo files.
Media and press OK.
2 Press the Navigation buttons to scroll to Photo
List and press OK.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
Menu
Description
Exit Mark Mode Exit the Mark Mode.
5 View photos.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
NOTE
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
ENTERTAINMENT
Using photo options
ENERGY
SAVING
Option
Press the ENERGY SAVING button
repeatedly to change the brightness of
your screen.
y y Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
y y TransitionEffect: Set the view mode
of the slideshow.
y y BGM: Selects a music folder for the
background music.
NOTE
y yYou cannot change the music
folder while the background
music is playing.
y yYou can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Slideshow
BGM
Options
MENU
Option
Hide
Exit
Number of selected photos
Hide
Option
Slideshow
BGM
Description
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos saved in the current folder display
during a slideshow.
To set a slideshow speed, select Option.
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust Option by MENU button
on the remote control.
(Rotate) Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
y yThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
View the photo by zoom in 2, 4 times.
NOTE
y yPhotos with a resolution of
960x540 or less cannot be
enlarged.
EXIT
Hides the option window.
To display the options, press OK.
Return to Photo List.
Photo options
1 Press MENU to show the Option menus.
2 Press the Navigation buttons to scroll to Set
Photo View, Set Video or Set Audio and press
OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
ENG
ENGLISH
Use the following options while viewing photos.
33
34
ENTERTAINMENT
When you select the Set Photo View,
ENGLISH
ENG
1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.
2 Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide
Fade In
Fades the slide out slowly before playing to the next slide.
ENTERTAINMENT
When you select the Set Video,
35
Listening to music
appropriate adjustments.
1 Press the Navigation buttons to scroll to My Media and press OK.
2 Press the Navigation buttons to scroll to Music
When you select the Set Audio,
1 Press the Navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
List and press OK.
3 Press the Navigation buttons to scroll to a folder
you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Play
Move
Change Numbers
To Movie List
P
Page Change
Exit
Mark Mode
Page 1/1
Music List
Mark Mode
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play Marked
Menu
Mark All
Unmark All
Mark
P
Page Change
Exit Mark Mode
Exit
Description
Play Marked
Display the selected music file.
Mark All
Mark all music files on the screen.
Unmark All
Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
ENG
ENGLISH
1 Press the Navigation buttons to scroll to make
36
ENTERTAINMENT
6 Control playback by using the following buttons.
ENGLISH
ENG
3 file(s) Marked
004. - B04.mp3
00:00
Drive1
005. - B05.mp3
00:00
006. - B06.mp3
00:00
Page 1/1
007. - B07.mp3
00:00
005. - B05.mp3
NOTE
008. - B08.mp3
00:00
02:30 / 03:25
Play with Photo
Button
This unit cannot support the ID3 Tag
yy
embedded MP3 files.
Page 1/1
Music List
MENU
Option
Hide
Exit
Description
Stops playing back the file and moves
back to the music list.
Plays a music file
Pauses or resumes playback
Skips to the next file
Skips to the previous file
or
Green
button
ENERGY
SAVING
MENU
Hide
EXIT
< or >
Tips for playing music files
When playing,
When you press the v button, the previous music file will be played.
When you press the w button, the next
music file will be played.
Start playing the selected music files and
then move to the Photo List.
Press the ENERGY SAVING button repeatedly to change the brightness of
your screen.
Show the Option menu.
Hides the option window.
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
yy
Non-supported files are displayed the preview image by icon only .
yy
Abnormal files are displayed in the form of
bitmap .
yy
A damaged or corrupted music does not play
but displays 00:00 in playtime.
yy
A music downloaded from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
yy
If you press OK,
buttons, screen saver is
stopped.
yy
The PLAY( ), Pause( ),
, ,
buttons
on the remote control are also available in
this mode.
yy
You can use the
button to select the next
music and the
button to select the previous music.
file name
002. B02.mp3
00:31 / 04:04
Time elapsed /Duration
ENTERTAINMENT
Music options
2 Press the Navigation buttons to scroll to Set Audio Play or Set Audio and press OK.
Viewing the Contents List
Plays back the stored files using the Export option
in SuperSign Manager.
1 Press the Navigation buttons to scroll to My
Media and press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
When you select the Set Audio Play,
1 Press the Navigation buttons to scroll to select
the Repeat or Random.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
2 Press the Navigation buttons to scroll to Contents List and press OK.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Contents List
USB1 USB Drive
test1.cts
07/01/2011
Drive1
Page 1/1
test2.cts
07/01/2011
test3.cts
07/01/2011
test4.cts
07/01/2011
test5.cts
07/01/2011
Move
To Movie List
Change Numbers
Play
P
Page Change
Exit
NOTE
When you select the Set Audio,
1 Press the Navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
yy
While playing media files from Contents List,
only the BACK, EXIT or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
yy
If there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
ENG
ENGLISH
1 Press MENU to access the Pop-Up menus.
37
38
ENTERTAINMENT
DivX® VOD Guide
ENGLISH
ENG
DivX® VOD Registration
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
DivX® VOD Deregistration
You should deregister your device with 8 digit DivX
deregistration code from your device at www.divx.
com/vod.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
1 Press MENU to access the main menus.
3 Press the Blue button.
2 Press the Navigation buttons to scroll to MY
4 Press the Navigation buttons to scroll to Deacti-
3 Press the Blue button.
5 Press the Navigation buttons to select Yes to
MEDIA and press OK.
4 Press the Navigation buttons to scroll to DivX
vation and press OK.
confirm.
Reg. Code and press OK.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
5 View the registration code of your display.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
NOTE
yy
While you are checking the registration
code, some buttons may not work.
yy
If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
product.
yy
The video or audio files that are not converted by the standard DivX codec may be
corrupted or not be played.
yy
The DivX VOD code allows you to activate
up to 6 devices under one account.
Yes
No
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
Once the deregistration is executed, you
yy
must register your device again to see
DivX® VOD contents.
39
ENTERTAINMENT
Using PIP/PBP
5 Select the PIP or PBP icon from the play list.
ENG
ENGLISH
Displays videos or photos stored on a USB device
on a single monitor by dividing it into the main and
sub screens. (See p.50)
1 Press the MENU button to move to OPTION
and press OK.
2 Press PIP/PBP to select PIP or PBP and then
01:02:30 / 02:30:25
press OK.
MENU
Exit
Hide
Option
< Movie List >
PIP/PBP
Mode
Move
Pre.
Off
Position
PIP
Size
PBP
3 Select Movie List or Photo List from My
Media. (With PIP/PBP selected, the Music
List and Contents List are deactivated.)
2/13
Slideshow
MENU
BGM
Option
Hide
Exit
< Photo List >
Movie List
Photo List
Music List
Contents List
6 Select either Main or Sub for sound. You must
4 Select a file you want and then press OK.
to select the output sound before running the
PIP or PBP function.
Page 1/1
Movie List
Select the sound path.
Drive1
USB1 USB Drive
001
002
005
006
Page 1/1
Main
004
003
Sub
7 The sub screen is displayed on the main
screen.
Move
To Photo list
Change Numbers
Mark Mode
Play
P
Exit
Page Change
40
CUSTOMIZING SETTINGS
ENGLISH
ENG
CUSTOMIZING SETTINGS
Accessing the main menus
MARK
ARC
PSM
1 Press MENU to access the main menus.
P
BRIGHT A
NESS G
E
MUTE
MENU
2 Press the Navigation buttons to scroll to one of the following menus and
press OK.
S.MENU
OK
BACK
3 Press the Navigation buttons to scroll to the setting or option you want
and press OK.
AUTO
TILE
EXIT
ID
ON
OFF
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.41)
Adjusts the image size,
quality, or effect.
PICTURE
OPTION (See p.46)
Customizes the general
settings.
OPTION
AUDIO (See p.44)
Adjusts the sound quality,
effect, or volume level.
AUDIO
NETWORK
NETWORK (See p.52)
Sets up the network
setting.
TIME
MY MEDIA
TIME (See p.45)
Sets the time, date, or
Timer feature.
MY MEDIA (See p.26)
Display and play movie,
photo and music content
stored on your USB.
CUSTOMIZING SETTINGS
PICTURE settings
PICTURE
1 Press MENU to access the main menus.
•
2 Press the Navigation buttons to scroll to PICTURE and
press OK.
3 Press the Navigation buttons to scroll to the setting or
Energy Saving : 16:9
OK
ENG
ENGLISH
• Aspect Ratio Move
41
ꔋ
: Off
• Smart Energy Saving : Off
• Picture Mode : Standard
• Backlight • Contrast 70
100
• Brightness 50
option you want and press OK.
• Sharpness 50
-To return to the previous level, press BACK.
• Color 60
• Tint 0
R
G
• Color Temp. 0
W
C
• Advanced Control
• Picture Reset
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
• Screen
The available picture settings are described in the following:
Setting
Aspect Ratio
Description
Changes the image size to view images at its optimal size (See p.21).
Energy Saving Sets to automatically adjust the screen brightness corresponding to the surroundings.
Level
Smart Energy
Saving
Picture Mode
Off
Disables Energy Saving function.
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen Off
The screen turns off in 3 seconds.
Adjusts the backlight and contrast depending on the screen brightness.
Level
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Off
Disables the Smart Energy Saving function.
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
42
CUSTOMIZING SETTINGS
Setting
ENGLISH
ENG
SCREEN
(In RGB
Mode Only)
Description
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Configure
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Basic image options
Setting
Description
Backlight
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp .
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options. Refer to the Advanced image options. (See p.43).
Picture Reset
Restores the options to the default setting.
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game
yy
the subsequent menus will be automatically set.
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
yy
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
CUSTOMIZING SETTINGS
43
Advanced Control
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (This function can be used
only under Component.)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
(Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can
be used only Component.)
Clear White
(Off/High/Low)
Make the white area of screen brighter and more white.
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise
Reduction
(Off/High/
Medium/Low)
Reduces screen noise without compromising video quality. (This function can be used only under
Component.)
Digital Noise
Reduction
(Off/High/
Medium/Low)
This option reduces the noise produced while creating digital video signals.
Gamma
(High/Medium/
Low)
Set your own gamma value. On the monitor, high gamma values display whitish images and low
gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - Component, HDMI-DTV)
ENG
ENGLISH
Setting
Dynamic
Contrast
(Off/High/
Medium/Low)
44
CUSTOMIZING SETTINGS
AUDIO settings
AUDIO
ENGLISH
ENG
• Clear Voice II 1 Press MENU to access the main menus.
Move
• Balance 2 Press the Navigation buttons to scroll to AUDIO and press
OK.
3 Press the Navigation buttons to scroll to the setting or
OK
: Off
ꔋ
0
L
• Sound Mode : Standard
• Infinite Sound: Off
• Treble 50
• Bass 50
R
• Reset
option you want and press OK.
• Digital Audio Input
• Speaker -To return to the previous level, press BACK.
: Off
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others, it helps users make dialog more clear.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
The most commanding and natural audio.
Music
Select this option to enjoy the original sound when listening to the music.
Cinema
Select this option to enjoy sublime sound.
Sport
Select this option to watch sports broadcasting.
Game
To enjoy dynamic sound when playing a game.
NOTE
If sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
Option
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound from two
speakers.
Treble
Controls the dominant sounds in the output. When you turn up the treble, it
will increase the output to the higher frequency range.
Bass
Makes the output sound softer. When you turn up the bass, it will increase
the output to the lower Frequency.
Reset
Resets the sound mode to the default setting.
Digital Audio
Input
HDMI/DisplayPort: Outputs the sound of digital signal from HDMI and display ports through the
monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
CUSTOMIZING SETTINGS
TIME settings
TIME
Move
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to TIME and press
OK.
OK
ꔋ
• Off Time : Off
• On Time : Off
• Sleep Timer : Off
• Power On Delay : Off
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
• Auto Off
: 15 min.
• Automatic Standby: 4hours
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sets the time to turn on or off the Monitor set.
Sleep Timer
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
y yOnce the on or off time is set, these functions operate daily at the preset time.
y yThe scheduled power-off function works properly only when the device time is set correctly.
y yWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time
if the set is turned on, and vice versa if the set is turned off.
ENG
ENGLISH
• Clock
45
46
CUSTOMIZING SETTINGS
OPTION settings
OPTION
Move
OK
ENGLISH
ENG
• Language
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to OPTION and press
OK.
ꔋ
• ISM Method : Normal
• DPM Select
: On
• Fail Over
: Off
• Factory Reset
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
• Set ID
:1
• Tile Mode
• PIP/PBP
• Fan
-To return to the previous level, press BACK.
• USB Content Recovery : Off
4 When you are finished, press EXIT.
• Product/Service Info.
• Portrait Mode
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
A user can choose to turn the power saving mode on / off.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
Factory Reset
Select this option to return to the default factory settings.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
CUSTOMIZING SETTINGS
Setting
PIP/PBP
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position
Moving the screen position horizontally and vertically.
Size
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
and sub screens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Adjusts the position of the sub screen (top left, bottom left, top right, bottom
right)
The default value is the bottom right.
Size
Adjusts the size of the sub screen (Size 0 to 10).
The default size of PIP (Size: 0) is 480x270; the maximum size 10 is 960x540.
NOTE
y yThe Position and Size options are enabled only in PIP mode.
ENG
ENGLISH
Tile Mode
47
48
CUSTOMIZING SETTINGS
Setting
Description
Setting
Mode
This option indicates the monitor's internal temperature and controls the fan.
• Auto: Switches the fan on and off according to the set temperature.
• On: The fan is always switched on.
• Manual: Switches the fan on and off according to user settings.
Hysteresis
The difference in temperature between when the fan is switched on and when
it is off.
Set Temperature
Set the temperature at which the fan is switched on.
Current
Temperature
Current temperature inside the set.
NOTE
y yWe recommend that you use the Auto mode to prevent any malfunctions resulting from
incorrect fan settings.
y yIf the interior temperature of the set exceeds 80°C, the set will be turned off automatically
for safety reasons.
USB Content
Recovery
Replays the content in a USB when the power is back on if it is turned off during playing a content.
(This function operates the same when a USB is disconnected and connected again.)
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
Portrait mode
Rotate OSD clockwise (90°,270°)
Option
Disables the Portrait mode.
90°
Rotate OSD clockwise 90°.
270°
Rotate OSD clockwise 270°.
ꔋ
90°
OK
ꔋ
:1
Move
: Normal
: On
: Off
• Language
• ISM Method • DPM Select
• Fail Over
• Factory Reset
• Set ID
• Tile Mode
• PIP/PBP
Move
: Normal
: On
: Off
:1
270°
OPTION
• Language
• ISM Method • DPM Select
• Fail Over
• Factory Reset
• Set ID
• Tile Mode
• PIP/PBP
OK
Off
OPTION
ENGLISH
ENG
Fan
CUSTOMIZING SETTINGS
49
Tile Mode
Off
When the Tile Mode
option is disabled
1X2
When using 2 monitors
ID 1
3X3
When using 9 monitors
2X2
When using 4 monitors
ID 2
ID 1
ID 2
ID 1
ID 2
ID 3
ID 3
ID 4
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
Tile ID
4X4
When using 16 monitors
5X5
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 5
ID 6
ID 7
ID 8
ID 6
ID 7
ID 8
ID 9
ID 10
ID 9
ID 10
ID 11
ID 12
ID 11
ID 12
ID 13
ID 14
ID 15
ID 13
ID 14
ID 15
ID 16
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
ENG
ENGLISH
This monitor can be tiled with additional monitors to create a large tiled display.
50
CUSTOMIZING SETTINGS
PIP/PBP
ENGLISH
ENG
Displays videos or photos stored in the USB device on
a single monitor by dividing it into the main and sub
screens. (See p.39)
NOTE
y yThe subscreen is only supported when using the
USB device.
Sub
Mode
*PIP(Picture In Picture): Displays the Sub screen
in the main screen.
*PBP(Picture By Picture): Displays the Sub
screen next to the main screen.
Sub
screen
Main
screen
PIP
PBP
Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
top left
top right
bottom left
bottom right
Size
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0:
480x270
< 1920x1080 >
USB
Main
Component
O
RGB
O
HDMI/DVI-D/Display Port
O
AV
X
y yYou can only change the size and position in PIP
mode.
y yWith PBP selected, the Aspect Ratio option in the
PICTURE menu is disabled (Fixed as 16:9).
y yWhile running the PBP function, the Tile Mode function
does not work.
y yYou must select the output sound before running
the PIP or PBP functions. (Select either Main or
Sub.)
y yIf you fail to select Main or Sub from the sound
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
y yYou cannot change the sound while running the
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
y yThe picture quality of the subscreen is set
according to the values selected in the main menu,
not the USB device.
y yWhen the power is turned off/on, the PIP/PBP
mode is disabled.
y yIf you play videos you selected in PIP/PBP mode,
the videos will play back repeatedly in succession.
y yThe buttons below work in PIP mode.
Button
Photo
Movie
CUSTOMIZING SETTINGS
51
Picture ID
2 If you press the left/right buttons or press the
ON button repeatedly, the Picture ID cycles
through OFF and 1 to 4. Assign the ID you
want.
Picture ID
Off
◀
▶
AUDIO
(RGB/DVI)
RS-232C OUT
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
Close
RS-232C OUT
RS-232C IN
REMOTE
CONTROL IN
RS-232C IN
RS-232C IN
RS-232C IN
If you assign the Set ID to each set with
yy
multi-vision, and then assign the Picture ID
using the red button on the remote control,
POWER
the key command
is displayed for the set
with the same Set ID and Picture ID. A set
with differentMONITOR
Set IDsENERGY
and INPUT
Picture IDs cannot
ON byOFF
be controlled
IR signals.
The maximum valueSAVING
of the Picture ID can be
yy
set in the Total
. , ! Set ID
ABC menu.
DEF
Please refer to the Installation Manual for
yy
GHI
more information
onJKLTotal MNO
Set ID assignment.
REMOTE
CONTROL IN
POWER
MONITOR
IR Receiver
ENERGY
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
PQRS
1/a/A
MARK
BRIGHT
NESS
P
A
G
E
2X2 Multi-Vision (Total Set ID: 4)
Set IDs are assigned as shown in the picture.
MUTE
MENU
AUTO
S.MENU
1 Press the red ON button on the remote control
to assign the PictureOKID.
BACK
TILE
ID
ON
OFF
TUV
-*#
CLEAR
WXYZ
MARK
ARC
PSM
EXIT
NOTE
ARC
PSM
P
BRIGHT A
NESS G
E
For example, if the
Picture ID is assigned
yy
MUTE
to 2, the upper right display (Set ID: 2) can
AUTO
be controlled
signals.
S.MENU
MENUby IR
For each set, you can change the
yy
settings for the PICTURE, AUDIO, TIME,
NETWORK and MY
MEDIA menus or the
OK
hot keys on the remote control.
If you press the green OFF button for
yy
Picture IDs, the Picture IDs for all sets are
EXIT any button
TILE press
turned off.BACK
If you then
ID
on the remote control, all sets will start
OFF
ON
working again.
Picture ID will be disabled while using the
yy
MY MEDIA menu.
ENG
ENGLISH
Picture ID is used to change the settings of a
specific display using a single IR receiver for
multi-vision. The set receiving the IR signal
communicates with another set via an RS232
connection. Each set is identified by a Set ID. If
you assign the Picture ID using the remote control,
only displays with the same Picture ID and Set ID
can be controlled remotely.
52
CUSTOMIZING SETTINGS
NETWORK settings
NETWORK
Move
ENGLISH
ENG
• Player Name Setting
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and
press OK.
• Network Setting
: None
• Network Status
: Not connected
• Server IP Setting
• Server IP Status
: Not connected
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Setting
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Network Setting
Configure the network settings.
Network Status
Display the network status.
- Internet is connected : Externally connected
- Network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting
Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
OK
ꔋ
MAKING CONNECTIONS
53
MAKING CONNECTIONS
1 Find an external device you want to connect to your Monitor set shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI - See p.54
DVI - See p.54
AV - See p.55
Component - See p.55
DVD
HDMI - See p.54
DVI - See p.54
AV - See p.55
Component - See p.55
VCR
AV - See p.55
Component - See p.55
Speaker
USB
Memory storage – See p.26
PC
HDMI - See p.17
DVI - See p.17
RGB - See p.16
LAN - See p.56
Display Port - See p.18
Camcorder/Camera
HDMI - See p.54
DVI - See p.54
AV - See p.55
Component - See p.55
Gaming device
HDMI - See p.54
AV - See p.55
Component - See p.55
NOTE
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.
yy
ENG
ENGLISH
Connect various external devices to the ports on the Monitor set’s back panel.
54
MAKING CONNECTIONS
ENGLISH
ENG
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
HDMI connection
Transmits the digital video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the HDMI
cable as shown on the following illustration.
Connect a HD receiver, DVD, or VCR player to the
Monitor set and select an appropriate input mode.
Back of the product.
DVI connection
DVI IN
RGB
/COMPONENT OUT
Transmits the digital video signal from an external
device to the Monitor set. Connect the external
device and the Monitor set with the DVI cable as
shown in the following illustration. To transmit an
audio signal, connect an optional audio cable.
AUDIO
IN
/DVI
RGB
/COMPONENT IN
REMOTE
CONTROL IN
Back of the product.
DVI IN
RGB
/COMPONENT OUT
AUDIO
IN
(not included)
/DVI
RGB
/COMPONENT IN
REMOTE
CONTROL IN
(not included)
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
MAKING CONNECTIONS
55
AV(CVBS) connection
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect
the external device and the Monitor set with the
RGB-Component cable as shown in the following
illustration.
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect
the external device and the Monitor set with
the Composite cable as shown in the following
illustration.
Back of the product.
RGB
/COMPONENT OUT
Back of the product.
RGB
/COMPONENT OUT
AUDIO
IN
AUDIO
IN
COMPOSITE
COMPOSITE
AUDIO
AUDIO
IN
IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
REMOTE
REMOTE
REMOTE
CONTROL IN
CONTROL IN
(not included)
CONTROL IN
REMOTE
CONTROL IN
(not included)
(not included)
(not included)
VIDEO OUT
VIDEO OUT
NOTE
When connecting to the Component port
yy
using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
NOTE
If input signals are received through the AV
yy
cable, multiple monitors cannot be connected
via the RGB OUT port.
Input signal may be degraded or lost when
yy
multiple monitors are connected.
For Component, in general, up to 3 monitors
yy
can be connected via the Component Out
port (RGB Shared) if the signal is stable and
there is no cable loss.
If you want to connect more than this number
yy
of monitors, we recommended that you use a
distributor.
ENG
ENGLISH
Component connection
56
MAKING CONNECTIONS
Connecting to the LAN
Connecting to a USB
ENGLISH
ENG
Connect a USB storage device such as a USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor set and
access the USB menu to use various multimedia
files.
LAN connection
A Using a router(Switch)
LAN
Switch
Monitor Set
PC
Network
B Using the Internet.
LAN
Monitor Set
Network
PC
or
MAKING CONNECTIONS
57
Daisy Chain Monitors
RGB Cable
15-pin D-Sub Signal Cable
(Max 3m)
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT
IN
RGB
/COMPONENT IN
RGB
/COMPONENT
IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
Monitor SET 1
Monitor SET 2
Monitor SET 3
Monitor SET 4
DVI Cable
DVI IN
DVI IN
DVI OUT
DVI OUT
DVI IN
DVI IN
DVI OUT
DVI OUT
DVI IN
DVI IN
DVI OUT
DVI OUT
DVI IN
DVI IN
DVI Cable
(Max 3m)
Monitor SET 1
Monitor SET 2
Monitor SET 3
Monitor SET 4
NOTE
When multiple monitors are connected in RGB input, it is recommended to use a distributor to avoid
yy
signal degradation and cable loss.
For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended
yy
resolution) if the signal is stable and there is no cable loss.If you want to connect more than this
number of monitors, we recommended that you use a distributor.
When the tile mode is configured via DVI cables, only the monitor that receives first signals can play
yy
HDCP-encrypted content. (The DVI Out port does not support HDCP.)
If the signal cable between the product and your PC is too long, make sure to use the DVI (RGB)
yy
booster or DVI (RGB) optical cable.
If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via
yy
the DVI Out port.
ENG
ENGLISH
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
• To use different products connected to each other Connect one end of the signal input cable (15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products.
58
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
No image is displayed
Problem
Resolution
Is the product power cord
connected?
y y See if the power cord is properly connected to the outlet.
ower is on, but the screen
P
appears extremely dark.
Does the 'Invalid Format'
message appear?
y y Adjust brightness and contrast again.
y y Backlight may need repair.
y y The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
y y The signal cable between PC and product is not connected. Check
the signal cable.
y y Press the 'INPUT' menu in the remote Control to check the input
signal.
oes the 'No signal' message
D
appear?
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
y y See if the plug&play function is supported by referring to the video
card user manual.
TROUBLESHOOTING
59
The screen image looks abnormal.
Resolution
Is the screen position wrong?
y y D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
y y See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
y y D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the y y D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
The screen is displayed
y y The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
y y If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
The audio function does not work.
Problem
No sound?
Resolution
y See if the audio cable is connected properly.
y Adjust the volume.
y See if the sound is set properly.
y Select the appropriate equalize sound.
Sound is too dull.
y
y
y
y
Sound is too low.
y y Adjust the volume.
ENG
ENGLISH
Problem
60
TROUBLESHOOTING
Screen color is abnormal.
ENGLISH
ENG
Problem
Resolution
Screen has poor color resolution y y Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
creen color is unstable or
S
mono-colored.
y y Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
y y Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
Resolution
The power suddenly turned off. y y Is the sleep timer set?
heck the power control settings. Power interrupted.
y yC
SPECIFICATIONS
LCD Panel
Video Signal
Screen Type
1387.80 mm Wide (55 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1387.80 mm
Pixel Pitch
0.630 mm (H) x 0.630 mm (V)
Max. Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
RGB : 30 kHz to 83 kHz
HDMI/DVI/DP : 30kHz to 83 kHz
Vertical Frequency
RGB : 56 Hz to 60 Hz
HDMI/DVI/DP : 56 Hz to 60 Hz
Synchronization Type
Separate Sync, Composite(AV) Sync, Digital, SOG
Input Connector
Power
15-pin D-Sub type (RGB / Component ), HDMI/DVI/DP(digital),
Composite(AV), RS-232C, LAN, USB
Rated Voltage
AC 100-240 V~, 50 / 60 Hz 3.3 A
Power Consumption
55WV70MS
On Mode : 210 W Typ.
Smart Energy Saving Mode : 120 W Typ.
Off Mode : ≤ 0.5 W
Sleep Mode : ≤ 0.7 W
55WV70BS
On Mode : 160 W Typ.
Smart Energy Saving Mode : 90 W Typ.
Off Mode : ≤ 0.5 W
Sleep Mode : ≤ 0.7 W
Dimensions
(Width x Height x
Depth) / Weight
* Wall Bracket available VESA
600 x 400
H
W
D
1215.2 mm X 686 mm X 99 mm / 33.4 Kg
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
ENG
ENGLISH
SPECIFICATIONS
61
62
SPECIFICATIONS
* Applicable only for models that support the speakers
ENGLISH
ENG
Audio
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
DTV Mode
RGB (PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Resolution
Component
HDMI/DVI
(DTV)
640 x 480
31.469
59.94
480i
o
x
o
x
1024 x 768
48.363
60
576i
1280 x 720
44.772
59.855
480p
o
o
1366 x 768
47.7
60
576p
o
o
1680 x 1050
65.290
59.954
720p
o
o
1920 x 1080
67.5
60
1080i
o
o
1080p
o
o
NOTE
HDMI/DVI/Display Port(PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1280 x 768
47.7
60
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
PC resolutions available as the input label
yy
option in RGB and HDMI/DVI input mode :
640 x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920
x 1080 / 60 Hz and DTV resolutions : 480p,
720p, 1080p.
NOTE
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
IR CODES
63
IR CODES
Code (Hexa)
95
08
Function
Energy Saving (
)
POWER
Note
R/C BUTTON
R/C BUTTON (ON/OFF)
0B
INPUT
R/C BUTTON
C4
Monitor On
R/C BUTTON
C5
Monitor Off
R/C BUTTON
43
MENU
R/C BUTTON
40
Up ( )
R/C BUTTON
41
Down ( )
R/C BUTTON
07
Left ( )
R/C BUTTON
06
Right ( )
R/C BUTTON
44
OK( )
R/C BUTTON
28
BACK(
5B
EXIT
R/C BUTTON
4D
PSM
R/C BUTTON
02
Volume
R/C BUTTON
03
Volume
R/C BUTTON
09
MUTE
E0
Bright
(Page UP)
R/C BUTTON
E1
Bright
(Page Down)
R/C BUTTON
10 to 19
Number Key 0 to 9
R/C BUTTON
72
Red Key (ID ON)
R/C BUTTON
71
Green Key (ID OFF)
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
7B
TILE
R/C BUTTON
76
ARC (4:3)
R/C BUTTON
77
ARC (16:9)
R/C BUTTON
AF
ARC (ZOOM)
R/C BUTTON
79
ARC (MARK)
R/C BUTTON
99
Auto Config.
R/C BUTTON
)
R/C BUTTON
R/C BUTTON
B1
R/C BUTTON
B0
R/C BUTTON
BA
R/C BUTTON
8F
R/C BUTTON
8E
R/C BUTTON
ENG
ENGLISH
All models do not support the HDMI/USB function.
yy
64
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at one
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
yy
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
PC
Monitor Set 1
RS-232C Configurations
8-Wire Configurations (Cross-over RS-232C cable)
PC
DCD
RXD
TXD
GND
DTR
DSR
RTS
CTS
1
2
3
5
4
6
7
8
D-Sub 9
(Female)
Set
1
3
2
5
6
4
8
7
DCD
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
y
y
y
y
y
y
y
Baud Rate : 9600 buad Rate (UART)
y
Data Length : 8 bit
y
Parity Bit : None
y
Stop Bit : 1bit
y
Flow Control : None
y
Communication Code : ASCII code
y
Use a crossed (reverse) cable
y
Monitor Set 2
Monitor Set 3
Monitor Set 4
NOTE
When using 3-wire connections (nonyy
standard), an IR daisy chain cannot be
used.
CONTROLLING THE MULTIPLE PRODUCT
65
Command reference list
DATA
(Hexadecimal)
2
01. Power
k
a
00H to 01H
02. Input Select
x
b
Refer to ‘02. Input Select’
03. Aspect Ratio
k
c
Refer to ‘03. Aspect Ratio’
04. Energy Saving
j
q
Refer to ‘04. Energy Saving’
05. Picture mode
d
x
00H to 04H
06. Contrast
k
g
00H to 64H
07. Brightness
k
h
00H to 64H
08. Sharpness
k
k
00H to 64H
09. Color
k
i
00H to 64H
10. Tint
k
j
00H to 64H
11. Color Temperature
x
u
00H to 64H
12. H Position
f
q
00H to 64H
13. V Position
f
r
00H to 64H
14. H Size
f
s
00H to 64H
15. Auto configuration
j
u
01H
16. Balance
k
t
00H to 64H
17. Sound mode
d
y
01H to 05H
18. Treble
k
r
00H to 64H
19. Bass
k
s
00H to 64H
20. Speaker
d
v
00H to 01H
21. Volume Mute
k
e
00H to 01H
22. Volume Control
k
f
00H to 64H
23. Time 1(Years/ Months/ Days)
f
a
Refer to ‘23. Time 1’
24. Time 2(Hours/ Minutes/Seconds)
f
x
Refer to ‘24. Time 2’
25. Off Timer(Repeat mode/ Time)
f
e
Refer to ‘25. Off Timer’
26. On Timer(Repeat Mode/ Time)
f
d
Refer to ‘26. On Timer’
27. On Timer Input
f
u
Refer to ‘27. On Timer Input’
28. Sleep Time
f
f
00H to 08H
29. Power On Delay
f
h
00H to 64H
30. Automatic Standby
m
n
00H to 01H
31. Auto Off
f
g
00H to 01H
32. Language
f
i
00H to 0AH
33. ISM mode
j
p
Refer to ‘33. ISM Method’
34. DPM Select
f
j
00H to 01H
35. Fail Over Select
m
i
00H to 02H
36. Fail Over Input Select
m
j
Refer to ‘36. Fail Over Input Select’
37. Reset
f
k
00H to 03H
38. Tile Mode
d
d
Refer to ‘38. Tile Mode’
39. Tile Mode Check
d
z
FFH
40. Tile ID
d
i
Refer to ‘40. Tile ID’
ENG
ENGLISH
COMMAND
1
66
CONTROLLING THE MULTIPLE PRODUCT
COMMAND
ENGLISH
ENG
DATA
(Hexadecimal)
1
2
41. Tile H Position
d
e
00H to 32H
42. Tile V Position
d
f
00H to 32H
43. Tile H Size
d
g
00H to 32H
44. Tile V Size
d
h
00H to 32H
45. Natural Mode (In Tile mode)
d
j
00H to 01H
46. Auto Switch Input Select
d
o
00H to 01H
47. FAN Fault check
d
w
FFH
48. Temperature Value
d
n
FFH
49. Key
m
c
Refer to ‘49. Key’
50. OSD Select
k
l
00H to 01H
51. Elapsed time return
d
l
FFH
52. Serial No. Check
f
y
FFH
53. S/W Version
f
z
FFH
54. White Balance Red Gain
j
m
00H to FEH
55. White Balance Green Gain
j
n
00H to FEH
56. White Balance Blue Gain
j
o
00H to FEH
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are
yy
not executed and treated as NG.
CONTROLLING THE MULTIPLE PRODUCT
67
Transmission / Receiving protocol
[Command1][Command2][ ][Set ID][ ][Data][Cr] or
[Command1][Command2][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] or
[Command1][Command2][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0x0D’.
* [ ]: ASCII code space ‘0x20’
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x] or
[Command2][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] or
[Command2][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4][x]
* In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback
presents status about each function.
* Note: In this mode, display will send the acknowledgement after power on processing completion.
There might be a time delay between command and acknowledgement.
* No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to ‘00’(=0x00).
ENG
ENGLISH
Transmission
68
CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
To control power On/Off the display.
ENGLISH
ENG
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : Power On
FF : Check status
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’
data based on this format, Acknowledgement data
feedback presents status about each function.
* Note: In this modes, display will send the
acknowledgement after power on processing
completion. There might be a time delay between
command and acknowledgement.
* There might be some time delays between
command and acknowledgement.
02. Input Select (Command: x b)
To select input source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: AV
40: Component
60: RGB PC
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(DTV)
A0: HDM(PC)
C0: Display Port(PC)
D0: Display Port(DTV)
04. Energy Saving (Command: j q)
To control the energy saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03. Maximum
05. Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
05. Picture Mode (Command: d x)
To select the picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
01: 4:3
02: 16:9
04: Zoom
09: Just scan(720p or more)
10 to 1F: Cinema Zoom 1 to16
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
07. Brightness (Command: k h)
To adjust screen brightness.
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k) (Video Timing only)
To adjust screen sharpness.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i) (Video Timing only)
To adjust screen color.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j) (Video Timing only)
To adjust screen tint.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint R50 to G50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
To adjust color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
12. H Position (Command: f q)
To set the Horizontal position.
* Only available for Tile Off mode.
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left -50 to Right 50
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
69
70
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
13. V Position (Command: f r)
To set the Vertical position.
* Only available for Tile Off mode.
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Bottom Max(-50) to Top Max(50)
* The operational range varies depending on the
RGB input resolution.
16. Balance (Command: k t)
To adjust balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
14. H Size (Command: f s)
To set the Horizontal size.
* Only available for Tile Off mode.
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Size -50 to 50
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Auto Configuration (Command: j u)
To adjust picture position and minimize image
shaking automatically.
* Only available for RGB input.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
To select the sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sport
05. Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
To adjust treble.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
19. Bass (Command: k s)
To adjust bass.
Data 00 to 64: Bass 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
To select speaker on/off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data 00: Speaker Off
01: Speaker On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
21. Volume Mute (Command: k e)
To select screen mute on/off.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
22. Volume Control (Command: k f)
To adjust volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
23. Time 1(Year/ Month/ Day) (Command: f a)
To set the Time 1(Year/ Month/ Day) values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 100 to 14: 2010 to 2030
Data 201 to 0C: January to December
Data 301 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1 values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
24. Time 2(Hour/ Minute/ Second) (Command: f x)
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 17: 00 to 23 hours
Data2 01 to 3B: 00 to 59 minutes
Data3 01 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2 values.
** This command won’t work if Time 1 has not been
set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENG
ENGLISH
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
71
72
CONTROLLING THE MULTIPLE PRODUCT
25. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat mode/ Time) function.
ENGLISH
ENG
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
Data2 01 to 17: 00 to 23 Hours
Data3 01 to 3B: 00 to 59 Minutes
* Enter “fe [Set ID] ff” for checking Off Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
27. On Timer Input (Command: f u)
To set the On Timer Input function.
Transmission
[f][u][ ][Set ID][ ][Data][Cr]
Data 20: AV
40: Component
60. RGB
70: DVI
90: HDMI
C0: Display Port
* Check if Time1, Time2, and On Timer(Repeat
Mode/ Time) functions have been set before setting
this function.
* On Timer(Repeat Mode/ Time) command should be
executed in advance this command to set On Timer
schedule properly.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
28. Sleep Time (Command: f f)
To set sleep time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
Data2 01 to 17: 00 to 23 Hours
Data3 01 to 3B: 00 to 59 Minutes
* Enter “fd [Set ID] ff” for checking On Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data
00: Off
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on(unit: second).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: 0 to 100sec.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
30. Automatic Standby (Command: m n)
To set the Automatic Standby function.
Data 00: Off
01: 4 Hours Off
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08: Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
31. Auto Off (Command: f g)
To set the Auto Off function.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data 00: Auto Off Off
01: Auto Off On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
34. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: DPM Select Off
01: DPM Select On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
To set language for OSD.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish(EU)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese(BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese(Cantonese)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
35. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
33. ISM mode (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
73
74
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
36. Fail Over Input Select (Command: m j)
To select fail over mode.
*Only available in Fail Over manual mode.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data Data1 to 4(Priority 1 to 3)
60: RGB
70: DVI-D*
90: HDMI**
C0: Display Port***
* Use 0x70 as data for DVI-D input, regardless DVID(PC) or DVI-D(DTV).
** Use 0x90 as data for HDMI input, regardless
HDMI-DTV or HDMI-PC
*** Use 0xC0 as data for Display Port input,
regardless Display Port(DTV) or Display Port(PC)
38. Tile Mode (Command: d d)
To select a Tile Mode Off/ On and Tile Row/ Column
size.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: 1st byte - Tile Row value
2nd byte - Tile Column value
*00, 01, 10, 11 means Tile Mode Off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1 to 3(Priority 1 to 3)
60: RGB
70: DVI-D****
90: HDMI*****
C0: Display Port******
**** Returns 0x70 as Data for DVI-D port, regardless
DVI-D(PC) or DVI-D(DTV).
***** Returns 0x90 as Data for HDMI port, regardless
HDMI-DTV or HDMI-PC.
****** Returns 0xC0 as Data for Display Port,
regardless Display Port(DTV) or Display Port(PC).
39. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check Tile Mode status
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
Data2
Data3
00: Tile Mode Off
01: Tile Mode On
00 to 0F: Tile Row Value
00 to 0F: Tile Col Value
37. Reset (Command: f k)
To execute the Picture, Screen, Audio and Factory
reset function.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
00: Picture Reset
01: Screen Reset
02: Audio Reset
03: Factory Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
40. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 01 to 225**
FF: Read Tile ID
** Data could not be set over (Tile Row) x (Tile
Column)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 32: Left (-50) to Right (0)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
42. Tile V Position (Command: d f)
To set the Tile Vertical position.
*Only available when Tile Natural Mode is off.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 0 to 32: Bottom (0) to Top (50)
(*Bottom/Top values depend on Tile V size.)
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
43. Tile H Size (Command: d g)
To set the Tile Horizontal Size.
*Set Tile H Position to 0x32 (50) before setting Tile H
Size.
*Only available when Tile Natural Mode is off.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
44. Tile V Size (Command: d h)
To set the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
*Only available when Tile Natural Mode is off.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
45. Natural Mode (In Tile Mode) (Comman : d j)
To set the Tile Natural mode.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
46. FAN Control (Comman : d o)
To set Fan control on/off.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
41. Tile H Position (Command: d e)
To set the Tile Horizontal position.
*Only available when Tile Natural Mode is off.
75
76
CONTROLLING THE MULTIPLE PRODUCT
47. FAN Fault Check (Command: d w)
To set Fan control on/off.
ENGLISH
ENG
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
48. Temperature Value (Command: d n)
To read the inside temperature of the display.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
50. OSD Select (Command: k l)
To select OSD(On Screen Display) on/off
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD Off
01: OSD On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
51. Elapsed time return (Command: d l)
To read the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
49. Key (Command: m c)
To send IR remote control code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
When display is in the standby mode, display will turn
on by Power button of remote control only.
52. Serial No.Check (Command: f y)
To read the serial numbers.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
53. S/W Version (Command: f z)
To read the software version.
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
54. White Balance Red Gain (Command: j m)
To adjust white balance red gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red gain 0 to 254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
55. White Balance Green Gain (Command: j n)
To adjust white balance green gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green gain 0 to 254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
56. White Balance Blue Gain (Command: j o)
To adjust white balance blue gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue gain 0 to 254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
77
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
E N E RGY STA R i s a s et of p owe rsaving guidelines issued by the U.S.
Environmental Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc. has
determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
Temporary noise is normal when powering ON or
OFF this device.
Download PDF

advertising