LG | 84WS70 | LG 84WS70BS-B Owner’s Manual

OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating your set and retain it
for future reference.
MONITOR SIGNAGE MODELS
84WS70BS
84WS70MS
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3LICENSES
4
ASSEMBLING AND
PREPARING
4Accessories
31 CUSTOMIZING SETTINGS
31
- PICTURE settings
35
Using the additional options
35
- Adjusting aspect ratio
37
- SOUND settings
38
- TIME settings
39
- OPTION settings
41
- NETWORK settings
41
- SUPPORT settings
5
Optional Accessories
6
Parts and buttons
8
Portrait Layout
8
Using the Mounting Cable Tie
9
Connecting the Eye-Bolt Bracket
10
Connecting the Media Player
42 MAKING CONNECTIONS
11
Connecting an Optional Box
43
External Device Connection
12
Mounting on a wall
43
- HDMI connection
14 REMOTE CONTROL
16
Change Device Name
16
SimpLink Setting
17 USING THE MONITOR
17
Connecting to a PC
18
- RGB connection
18
- DVI-D connection
19
- HDMI connection
19
- Display Port connection
20
- Using the Input List
21ENTERTAINMENT
21
- Connecting to a wired network
22
- Network Status
23
- Connecting USB storage devices
25
- Using My Media
27
- Playing video
29
- Viewing photos
30
- Listening to music
44
- AV(CVBS) connection
45
Connecting to a USB
45
Connecting to the LAN
46
Daisy Chain Monitors
47TROUBLESHOOTING
50SPECIFICATIONS
54 IR CODES
55 CONTROLLING THE MULTIPLE
PRODUCT
55
Connecting the cable
55
RS-232C Configurations
55
Communication Parameter
56
Command reference list
58
Transmission/ Receiving protocol
LICENSES
3
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays
DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com .
Find your registration code in the DivX VOD section of your device setup
menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and
are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com . Manufactured under license
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0 Channel is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
NOTE
The warranty will not cover any damages caused by using the product in an excessively dusty
yy
environment.
ENGLISH
LICENSES
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
Power Cord
POWER
ENERGY
MONITOR
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
CD (Owner's Manual)/ Card
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
OFF
Eye-Bolt Bracket (2 EA)
M4 x L12 Screw (4 EA)
For Eye-Bolt Bracket
Remote control and
Batteries
DP Cable
Mounting Cable Tie (2 EA)
CAUTION
Do not use any unauthorized or aftermarket items to ensure the safety and product life span.
yy
Any damages or injuries by using unauthorized or aftermarket items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
SuperSign software and manual.
yy
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (http://www.lgecommercial.com/supersign ) and download the latest
software for your model.
ASSEMBLING AND PREPARING
5
Optional Accessories
Media Player
Screws
CD(Owner's Manual)/ Card
Media Player Kit
84WS70MS
Only supported for 84WS70MS.
yy
Optional Box
Screws
Optional Box Kit
NOTE
Optional accessories are not included for all models.
yy
The Optional Box Port may be used for future devices. It is currently not supported.
yy
ENG
ENGLISH
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
6
ASSEMBLING AND PREPARING
Parts and buttons
ENGLISH
ENG
IR Receiver/
Power Indicator
 Lighting On: Turned on
 Lighting Off: Turned off
Connection panel
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
yy
Screen Buttons/
Screen Marks
ASSEMBLING AND PREPARING
Screen Marks
Description
Changes the input source.
MENU
Accesses the main menus, or saves your input and exits the menus.
Moves the selection up and down.
Adjusts the volume level.
/I
Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
Turns the power on or off.
IR Receiver
This is where the unit receives signals from the remote control.
Power Indicator
This Indicator lights up red when the display operates normally(on mode). If the display
In sleep mode (In Power Saving mode), this indicator color changes to amber.
ENG
ENGLISH
INPUT
AUTO/SET
7
8
ASSEMBLING AND PREPARING
Portrait Layout
ENGLISH
ENG
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
84WS70MS
84WS70BS
Installing in Portrait Position is not supported.
Using the Mounting Cable
Tie
Insert the two cable ties into the bottom hole on the
back of the set as shown in the figure to organize
cables.
ASSEMBLING AND PREPARING
9
Connecting the Eye-Bolt Bracket
Installing in Landscape Position
Installing in Portrait Position
84WS70MS
84WS70BS
Installing in Portrait Position is not supported.
ENG
ENGLISH
The Eye-bolt bracket is designed to be used to lift the set up.
Attach the bracket to the product using the two screws provided.
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
Connecting the Media
Player
3Attach the Media Player using the four provided
screws.
1 Place a soft cloth on the table and put the set
with the screen facing downward. Remove the
handle at the bottom of the section where the
Media Player is mounted on the set.
2To mount the Media Player, push it into the
special compartment located on the back of the
monitor.
NOTE
Use the screws provided with the product
yy
(diameter 3.0 mm x pitch 0.5 mm x length 6.0
mm).
ASSEMBLING AND PREPARING
11
Connecting an Optional Box
1Place a soft cloth on the table and put the set
with the screen facing downward. To mount
the box, push it into the special compartment
located on the back of the monitor.
2Attach the box using the two provided screws.
NOTE
Only supported for 84WS70MS.
yy
ENG
ENGLISH
84WS70MS
12
ASSEMBLING AND PREPARING
Mounting on a wall
CAUTION
ENGLISH
ENG
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
10 cm
10 cm
Disconnect the power before installing or
yy
moving the monitor. Otherwise electric shock
may occur.
If you install the Monitor on a ceiling or
yy
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the Monitor and void your
warranty.
Use screws and wall mounts that meet the
yy
VESA standard. Any damages or injuries by
misuse or using an improper accessory are
not covered by the warranty.
10 cm
10 cm
NOTE
If you intend to mount the Monitor to a wall, attach
a Wall mounting interface (optional parts) to the
back of the set.
When you install the Monitor using a wall mounting
interface (optional parts), attach it carefully so it
will not fall.
1 Please, use a wall mount and screws in
accordance with VESA Standards.
2 If you use screws longer than standard, the
monitor might be damaged internally.
3 If you use improper screws, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for damage.
4 Please use VESA standard as below.
785mm or greater
yy
* Fastening screw: Diameter 8.0 mm x Pitch
1.25 mm x Length 16 mm
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
yy
supplied with the wall mount.
ASSEMBLING AND PREPARING
Securing the product to a wall (optional)
1 Insert and tighten the eye-bolts, or product
brackets and bolts on the back of the product.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the product.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
yy
hang on the product.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the product securely.
Brackets, bolts and ropes are optional. You
yy
can obtain additional accessories from your
local dealer.
WARNING
If a product is not positioned in a sufficiently
yy
stable location, it can be potentially
hazardous due to falling. Many injuries,
particularly to children, can be avoided by
taking simple precautions such as:
»» Using cabinets or stands recommended
by the manufacturer of the product.
»» Only using furniture that can safely
support the product.
»» Ensuring the product is not overhanging
the edge of the supporting furniture.
»» Not placing the product on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the product to a suitable support.
»» Not standing the product on cloth or other
materials placed between the product
and supporting furniture.
»» Educating children about the dangers of
climbing on furniture to reach the product
or its controls.
ENG
ENGLISH
(Depending on model)
13
14
REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control at the
yy
remote control sensor on the Monitor.
(POWER)
Turns the Monitor on or off.
MONITOR ON / OFF
Turn off the monitor and then
turn it back on.
ENERGY SAVING
Adjusts the brightness of
the screen to reduce energy
consumption.
POWER
ARC
Selects the Aspect Ratio
Mode.
MARK
The current model does not
support this function.
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
Number and Alphabet buttons
Enters numerical or alphabetical
characters depending on the
setting.
DEF
MNO
WXYZ
CLEAR
Deletes the entered numerical
or alphabetical character.
MARK
ARC
Volume Up / Down
Adjusts the volume level.
PSM
Selects the Picture Status
Mode.
INPUT
Selects the input mode.
INPUT
OFF
ON
1/a/A Button
Toggles between numerical
and alphabetical.
ENERGY
MONITOR
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
MUTE
Mutes all sounds.
OK
S.MENU
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
REMOTE CONTROL
15
ENG
ENGLISH
POWER
ENERGY
MONITOR
MENU
Accesses or exits the menus.
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
Navigation buttons
Scrolls through menus or
options.
PSM
OK
Selects menus or options and
confirms your input.
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
Selects the SuperSign OSD
Menu.(SuperSign input only)
OK
BACK
TILE
ID
ON
ID ON/OFF
The current model does not
support this function.
E
MUTE
MENU
BACK
Allows the user to move back
one step.
P
BRIGHT A
NESS G
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
OFF
EXIT
EXIT
Clears all on-screen displays
and returns to Monitor
viewing from any menu.
TILE
The current model does not
support this function.
USB Menu control buttons
Controls media playback.
16
REMOTE CONTROL
ENGLISH
ENG
Change Device Name
SimpLink Setting
You can edit the name of the external device connected to the input port to display which device is
connected to the port.
SimpLink allows you to control various multimedia
devices to enjoy the multimedia simply by using
the remote control through the SimpLink menu.
1 Press INPUT to access Input List.
1 Press INPUT to access Input List.
POWER
POWER
ENERGY
MONITOR
INPUT
SAVING
2
.,!
ABC
DEF
GHI
JKL
AUTO
MNO
PQRS
TUV
WXYZ
-*#
BACK
TILE
EXIT
SAVING
2
MENU S.MENU
In the Input 1/a/A
List screen, press the ID OFF
CLEAR
(green) on the remoteOKcontrol.
.,!
ABC
DEF
GHI
JKL
AUTO
MNO
PQRS
TUV
WXYZ
-*#
BACK
ID
ON
INPUT
OFF
ON
MENU S.MENU
In the Input1/a/A
List screen, press the ID ON (red)
CLEAR
on the remote control.OK
ENERGY
MONITOR
OFF
ON
TILE
EXIT
ID
OFF
ON
OFF
3 You can select any option for Input Label
except USB.
NOTE
External inputs supported: AV, RGB, HDMI1, HDMI2, DVI-D, Display Port and SuperSign
yy
Input labels available: Blu-ray, DVD, VCR, Home theater, AV Receiver, Set-top Box, Cable Box,
yy
Satellite, IPTV, TV, Smart Box, Game, PC, Notebook, Smart phone, Camera, and Camcorder.
The set Input Label is displayed on the Input List, or when switching the input.
yy
If DTV/PC compatible signals are output, the screen settings change according to the Input Label
yy
setting. If Input Label is set to PC, the screen's aspect ratio is automatically set to Just Scan.
USING THE MONITOR
17
Connecting to a PC
Your Monitor supports the Plug & Play* feature.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
ENG
ENGLISH
USING THE MONITOR
CAUTION
Connect the
yy
signal input cable
and tighten it by
turning the screws
clockwise.
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the screen
yy
for a long period of time to prevent image
burn. Use a screensaver if possible.
NOTE
It is recommended you use an HDMI
yy
connection for the best image quality.
Use a shielded signal interface cable, such
yy
as D-sub 15 pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
If you turn the Monitor on when the set is
yy
cold, the screen may flicker. This is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
For some graphic cards, the screen may not
yy
display properly when you use dual monitors.
18
USING THE MONITOR
ENGLISH
ENG
RGB connection
DVI-D connection
Transmits an analog video signal from your PC to
the Monitor. Connect the PC and the Monitor
set with the 15 pin signal cable as shown in the
following illustrations.
Select RGB input source on the monitor.
Transmits a digital video signal from your PC to
the Monitor. Connect the PC and the Monitor
with a DVI cable as shown the following
illustrations.
Select DVI-D input source on the monitor.
Back of the product.
Back of the product.
(not included)
(not
included) (not
included)
(not included)
PC/ MAC
Macintosh Adapter
(not included)
NOTE
Use the standard Macintosh
yy
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
PC
USING THE MONITOR
19
Display Port connection
Transmits the digital video and audio signals
from your PC to the Monitor. Connect the PC and
the Monitor with an HDMI cable as shown in the
following illustration.
Select HDMI input source.
Transmits the digital video and audio signals from
your PC to the Monitor. Connect the PC and the
Monitor with a Display Port cable as shown in the
following illustrations.
Select Display Port input source.
Back of the product.
(not
included)
PC
(not included)
NOTE
Use a High Speed HDMI®/™ Cable.
yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
If you want to use HDMI-PC mode, you must
yy
set the input label to PC mode.
When HDMI PC is used, a compatiblity
yy
problem could occur.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
-High-Speed HDMI®/™ Cable
-High-Speed HDMI®/™ Cable with Ethernet
PC
NOTE
It is recommended to use the following
yy
specifications to play 3840 x 2160 video
seamlessly in HDMI or DP modes.
»» Recommended PC specifications - CPU:
Intel core i7 or higher, graphic card: NVIDIA
GTX TITAN or higher, AMD HD7000 series
or higher.
»» Recommended video - For H.264, 140
Mbps or lower data transmission rate.
ENG
ENGLISH
HDMI connection
20
USING THE MONITOR
Using the Input List
ENGLISH
ENG
1Press INPUT to access the INPUT LIST.
POWER
MONITOR
2
ENERGY
INPUT
OFF
ON
SAVING
1/a/A CLEAR
Press the Navigation
buttons
to scroll to one of the input sources and press OK.
.,!
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
-*#
Input source
Description
AV
Watch video from a VCR or other external devices.
RGB
View a PC display on the screen.
HDMI1
Watch contents in a PC, DVD of Digital set-top box other high definition devices.
HDMI2
Watch contents in a PC, DVD of Digital set-top box other high definition devices.
Display Port
Watch contents in a PC, DVD of Digital set-top box other high definition devices.
DVI-D
View a PC display on the screen.
SuperSign
Views the Media Player display on the screen.
ENTERTAINMENT
21
Connecting to a wired network
(Depending on model)
Connect the display to a local area network (LAN)
via the LAN port as shown in the following illustration and set up the network settings.
This monitor only supports a wired network connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet provider or router manual.
LAN
Router
@
Internet
Internet
LAN
WAN
Follow the steps below to set up the network settings. (Even if your display is already connected
automatically, running setup again will not harm
anything.)
1Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to scroll to Network Connection and press OK.
4Select Set Expert.
5 Select IP Auto Setting or IP Manual Setting.
-IP Manual Setting : press the navigation and
number buttons. IP addresses will need to be
input manually.
-IP Auto Setting : Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
ETHERNET
Cable modem
CAUTION
yy
Do not connect a modular phone cable to the
LAN port.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
yy
Network setting menu will not be available
until the display is connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENG
ENGLISH
ENTERTAINMENT
22
ENTERTAINMENT
NOTE
ENGLISH
ENG
yy
If you want to access the Internet directly on
your display, the internet connection should
always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yy
If you do not complete the network settings,
the network may not work properly.
Tips for Network setting
yy
Use a standard LAN cable with this display. Cat5
or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or disconnect the power cable of the home network router
or cable modem. Then power on and/or connect
the power cable again.
yy
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable
terms of service. For details, contact your ISP.
yy
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow for
such a connection, you will not be able to connect the display.
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices you
can connect at the same time. (If your ISP limits
sub-scription to one device, this display may
not be allowed to connect when a PC is already
connected.)
yy
The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Network Status
1Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Status.
4Press OK to check the network status.
5 When you are finished, press EXIT.
ENTERTAINMENT
Connect a USB storage device (external HDD,
USB memory) to the USB port of Monitor to enjoy
the content files stored in the USB device on your
Monitor.
or
CAUTION
yy
Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
Tips for using USB storage devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition program may not be recognized.
yy
A USB storage device which uses its own
driver will not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such a
device is suddenly separated or unplugged,
the stored files or the USB storage device
may be damaged.
yy
Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction. Only use a USB storage device
which has normal music files, image files or
movie files.
yy
Please use only a USB storage device which
was formatted as a FAT32 file system or
NTFS file system by the Windows operating
system. In case of a storage device formatted with a different utility program which is
not supported by Windows, it may not be
recognized.
yy
Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable included by the device maker.
yy
Some USB storage devices may not be supported or operate smoothly.
yy
File alignment method of USB storage devices is similar to Window XP and the Monitor
can recognize up to 100 English characters.
yy
Be sure to back up important files since data
stored on a USB memory device may be
damaged. We will not be responsible for any
data loss.
ENG
ENGLISH
Connecting USB storage devices
23
24
ENTERTAINMENT
ENGLISH
ENG
yy
If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source.
yy
If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
yy
If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yy
If the USB memory device does not work
properly, disconnect and reconnect it.
yy
How fast a USB memory device is detected
differs from device to device.
yy
If the USB is connected in Standby Mode,
that drive will automatically be loaded when
the display is turned on.
yy
The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
yy
Any device with more than the recommended
capacity may not work properly.
yy
If a USB external hard disk with a “Energy
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly with videos.
yy
A maximum of 999 folders or files can be
recognized under one folder.
yy
It is recommended you use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
yy
Only a USB memory stick can be used to
play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
yy
Only an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
yy
A USB 3.0 storage device may not work.
ENTERTAINMENT
25
Using My Media
1 Connecting a USB device.
2Press INPUT to access the INPUT LIST.
3 Press the Navigation buttons to scroll to USB device and press OK.
4 Press the Navigation buttons to scroll to the VIDEO/ PHOTO/ MUSIC you want and press OK.
Displays video/ photo/ music files on all devices connected to the Monitor.
MY MEDIA
Contents Type
ALL
VIDEOS
PHOTOS
MUSIC
Supported File Formats
Supporting file
Maximum data transfer rate :
20 Mbps (megabits per second)
External subtitle formats supported :
*.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa,
*.txt (TMPlayer), *.psb (PowerDivX)
Internal subtitle formats supported :
XSUB (supports internal subtitles generated from DivX6)
ENG
ENGLISH
Provides video/ photo/ music files on your Monitor by connecting to a USB device
26
ENTERTAINMENT
Type
ENGLISH
ENG
Video
Supporting file
yy Maximum: 1920 x 1080 @30p
Extension
.asf
.wmv
Video
Audio
Video
.divx
.avi
.mp4
.m4v
.mov
.mkv
.ts
.trp
.tp
.vob
Music
Audio
WMA Standard, WMA 9 Professional
DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC, Motion Jpeg
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, LPCM,
ADPCM, DTS
Video
H.264/AVC, MPEG-4 Part 2
Audio
AAC
Video
H.264/AVC
Audio
HE-AAC, Dolby Digital
Video
H.264/AVC, MPEG-2, VC-1
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
Dolby Digital, Dolby Digital Plus, AAC
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II,
DVD-LPCM
.mpg
.mpeg
Video
MPEG-1
Audio
MPEG-1 Layer I, II
File type
Item
Bit rate
mp3
Sample freq.
Support
Photo
Codec
VC-1 Advanced Profile, VC-1 Simple and
Main Profile
File type
Item
Available
file type
jpeg, jpg, jpe
Info
32 Kbps - 320 Kbps
16 kHz - 48 kHz
MPEG1, MPEG2, Layer2, Layer3
Profile
SOF0: baseline
SOF1: Extend Sequential
SOF2: Progressive
Minimum: 64 x 64
Photo size
Maximum:
Normal Type: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
ENTERTAINMENT
27
Playing video
ENG
ENGLISH
Controls playback and sets options while viewing videos.
1 In the MY MEDIA screen, press the Navigation button to scroll to Video and press OK.
2 Press the Navigation buttons to scroll to the file you want and press OK.
Selects the desired point and plays.
Plays
Remote
Button
Option
List
Sets options.
Stops playback
and returns to
the list.
Description
Stops the playback
Plays a video
Pauses or resumes the playback
Scans backward in a file
Scans forward in a file
MENU
BACK
or
ENERGY
SAVING
Show the Option menu.
Return to Movie List.
Skips to specific points in a file during playback. The time of a specific point will appear on the status
bar. In some files, this function may not work properly.
Press the
ENERGY SAVING button repeatedly to increase the brightness of your screen.
28
ENTERTAINMENT
NOTE
ENGLISH
ENG
yy
Only 10,000 of sync blocks are supported
within a subtitle file.
yy
When playing a video, you can adjust the
Picture Size by pressing the ARC button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
CAUTION
yy
Some subtitles created by users may not
work properly.
yy
The video and subtitle files should be placed
in the same folder. For subtitles to display
correctly, the video and subtitle files must
have the same name.
yy
We do not support any stream that contains
GMC (Global Motion Compensation) or Qpel
(Quarterpel Motion Estimation).
yy
Only H.264 / AVC profile level 4.1 and lower
is supported.
yy
The file size limit is dependent on the
encoding environment.
yy
Video files created by some encoders may
not be played back.
yy
Video files in formats other than the ones
specified here may not be played back.
yy
Playback of video files stored on the USB
device that do not support High Speed, may
not work properly.
yy
DTS audio codec is only support with USB
video file playback.
Tips for using playing video files
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
HD videos with a maximum of 1920 x 1080
@ 25/30p or 1280 x 720 @ 50/60p are supported, depending on the frame.
yy
Videos with resolutions higher than 1920
X 1080 @ 25/30p or 1280 x 720 @ 50/60p
may not work properly depending on the
frame.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
A movie file more than 30 GB in file size is
not supported for playback.
ENTERTAINMENT
29
Viewing photos
ENG
ENGLISH
Controls playback and sets options while viewing pictures in full screen.
1 In the MY MEDIA screen, press the Navigation button to scroll to PHOTO and press OK.
2 Press the Navigation buttons to scroll to the file you want and press OK.
Slideshow
Displays photos
as a slideshow.
Option
BGM
Plays background
music.
Rotates or enlarges
the picture.
Sets options.
List
Stops playback
and returns
to the list.
30
ENTERTAINMENT
Listening to music
ENGLISH
ENG
Controls playback and sets options while playing music.
1 In the MY MEDIA screen, press the Navigation button to scroll to MUSIC and press OK.
2 Press the Navigation buttons to scroll to the file you want and press OK.
Option
Plays
Selects the desired point
and plays
Remote
Button
Sets options.
List
Returns to the
list
Description
Stops playback
Plays a music file
Pauses or resumes playback
Skips to the next file
Skips to the previous file
or
ENERGY
SAVING
MENU
or
When playing,
When you press the
When you press the
Press the
button, the previous music file will be played.
button, the next music file will be played.
ENERGY SAVING button repeatedly to increase the brightness of your screen.
Show the Option menu.
When using the
or
button during playback a cursor indicating the position can be played.
CUSTOMIZING SETTINGS
31
PICTURE settings
ENG
ENGLISH
CUSTOMIZING SETTINGS
PICTURE
Energy Saving
1 Press the Navigation buttons to scroll to PICTURE.
: Off
Smart Energy Saving : Off
2 Press the Navigation buttons to scroll to the setting
Picture Mode
: Standard (User)
Backlight
or option you want and press OK.
70
Contrast 100
-To return to the previous level, press BACK.
Brightness 50
3 When you are finished, press EXIT.
Sharpness 50
Color
When you return to the previous menu, press BACK.
Tint
60
0
R
G
Color Temp. 0
W
C
Advanced Control
Picture Option
Picture Reset
Aspect Ratio
Picture Wizard
Screen
The available PICTURE settings are described in the following:
Setting
Description
Reduces power consumption by adjusting screen brightness.
Energy Saving Level
Smart Energy
Saving
Auto
Monitor sensor detects the ambient lighting and automatically
adjusts the screen brightness.
Min. Luminance : Select the minimum brightness for the
screen under low ambient light.
Sensing Strength : Select the Monitor's range of brightness in the viewing
environment.
Off
Turns off Energy Saving mode.
Minimum/
Medium/
Maximum
Applies the pre-set Energy Saving mode.
Screen off
Screen is turned off after 3 seconds and only sound is played.
Press any button on the remote control to turn the screen
back on.
Adjusts the backlight and contrast depending on the screen brightness.
Level
Off
Disables the Smart Energy Saving function.
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
32
CUSTOMIZING SETTINGS
Setting
ENGLISH
ENG
Picture Mode
Description
Selects the picture mode optimized for the viewing environment or the programme.
Mode
Intelligent
Sensor
Detects the ambient illumination and automatically adjusts the Monitor's
brightness level to reduce power consumption. Automatically adjusts brightness,
sharpness, color or tint for optimum picture quality.
Vivid
Heightens contrast, brightness and sharpness to display vivid images.
Standard
Displays images in standard levels of contrast, brightness and sharpness.
Cinema/ Game
Displays images that have been optimized for movies or games.
Expert1, 2
Aspect Ratio
Menu for adjusting picture quality that allows experts and amateurs to enjoy the
best Monitor viewing. This menu is ISF-certified and provided for picture tuning
experts. (ISF logo can only be used on ISF-certified Monitor units.)
ISFccc: Imaging Science Foundation Certified Calibration Control
Changes the image size to view images at its optimal size.
Picture Wizard Use the remote control and follow the instructions of the Picture Wizard to calibrate and adjust for
optimum picture quality without expensive pattern devices or help from a specialist.
Follow the instructions to obtain the optimum picture quality.
Screen
(In RGB
Mode Only)
Adjusts picture in RGB-PC mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Config.
Adjusts the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/ Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky. Run Auto Config. before adjusting these.
Reset
Restores all options to the default setting.
NOTE
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum/ Medium/ Maximum the Smart Energy Saving function is
yy
disabled.
If Energy Saving is set to Auto/ Maximum/ Screen off the Backlight function is disabled.
yy
Depending on the input signal, the available range of picture modes may differ.
yy
yy Expert mode is for picture tuning professionals to control and fine-tune using a specific image.
For normal images, the effects may not be dramatic.
CUSTOMIZING SETTINGS
33
Picture Mode options
Description
Backlight
Adjusts the display brightness by varying the brightness of the LCD panel.
Contrast
Adjusts the difference between bright and dark regions of the screen.
Brightness
Adjusts the overall screen brightness.
Sharpness
Adjusts the sharpness of the borders between bright and dark.
Color
Adjusts the color on the screen darker or lighter.
Tint
Adjusts the red/green color balance.
Color Temp.
Adjusts the overall tone of color to warm or cool.
Advanced Control
Adjusts the advanced options. Refer to the Advanced image options.
Picture Option
Adjusts detailed setting for images.
Picture Reset
Restores the options to the default setting.
Each picture mode is reset. Select the picture mode you wish to reset.
Advanced image options
Setting
Description
Dynamic Contrast
Adjusts the contrast to the optimal level according to the brightness of the image.
Dynamic Color
Adjusts color for more natural-looking colors.
Clear White
Enhances whites on screen to make the image brighter and sharper.
Preferred Color
Skin Color : Skin Color spectrum can be separately set to implement the skin Color as defined
by the user.
Grass Color : Natural color spectrum (meadows, hills, etc.) can be separately set.
Sky Color : Sky color is set separately.
Super Resolution
Provides a crystal-clear picture by improving the details in areas where the picture is blurry or
unclear.
Gamma
Sets the gradation curve according to the output of the picture signal in relation to the input
signal.
Color Gamut
Selects the range of colors that can be expressed.
ENG
ENGLISH
Setting
34
CUSTOMIZING SETTINGS
Picture Option
ENGLISH
ENG
Setting
Description
Noise Reduction
Reduces screen noise in the video.
MPEG Noise
Reduction
Reduces noise caused by compressing digital video.
Black Level
Adjusts the brightness or darkness of the screen to suit the black level of the picture input using
the degree of darkness (black level) of the screen.
Real Cinema
Optimizes the screen for movie viewing.
Eye Care
Adjusts screen brightness to prevent eye glare. (Depending on model)
LED Local Dimming Brightens bright areas and darkens dark areas of the image for maximum contrast and minimum
blur while reducing power consumption.
Off: Turns off LED Local Dimming.
Low: Expresses natural black tones. Uses this setting for viewing movies.
Medium: Deepens black tones compared to Low.
High: Deepens black tones and delivers clearer image than Medium. Perfect for viewing in
brightly lit areas.
Trumotion
Corrects images to display smoother motion sequences.
Off: Turns off LED Local Dimming.
Smooth: De-Judder / De-Blur value is set to 3.
Clear: De-Judder / De-Blur value is set to 7.
Clear Plus: The screen appears clearer when Clear is selected.
User: De-Judder / De-Blur can be set manually.
- De-Judder : This function adjusts juddering of the screen.
- De-Blur : This function adjusts and eliminates blurring of the screen.
NOTE
Setting LED Local Dimming to Medium / High reduces power consumption.
yy
If the video signal is 60Hz, TruMotion may not work.
yy
35
CUSTOMIZING SETTINGS
Using the additional options
Resize the image to view the image at its optimal size by pressing ARC while you are watching content.
CAUTION
If a fixed image displays on the screen for a long period of time, it will be imprinted and become a
yy
permanent disfigurement on the screen. This is “image retention” or “burn-in” and not covered by the
warranty.
If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area
yy
of the screen.
When using the 84WS70BS model, do not display a static image on the screen for more than two
yy
hours.
MODE
AV
ARC
RGB
Display
Port
DVI-D
HDMI
PC
DTV
PC
DTV
PC
DTV
PC
16:9
o
o
o
o
o
o
o
o
Just Scan
x
x
o
x
o
x
o
x
Original
o
x
o
x
o
x
o
x
4:3
o
o
o
o
o
o
o
o
Zoom
o
x
o
x
o
x
o
x
Cinema Zoom 1
o
x
o
x
o
x
o
x
ENG
ENGLISH
Adjusting aspect ratio
36
CUSTOMIZING SETTINGS
ENGLISH
ENG
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen. This may cause image retention around
the border of the black bars.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- Original : The aspect ratio is not adjusted
from the original. It is set by the program being
watched.
Original
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
CUSTOMIZING SETTINGS
SOUND settings
37
SOUND
Sound Mode
: Standard
2 Press the Navigation buttons to scroll to the setting
Virtual Surround
: Off
Clear Voice II
: On
AV Sync.
: Off
User EQ
or option you want and press OK.
-To return to the previous level, press BACK.
2
Sound Setting
3 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available SOUND options are described in the following:
Setting
Description
Sound Mode
Allows optimized sound for custom Monitor installation.
Mode
Standard
Suitable for all types of video.
Music/ Cinema/
Sport/ Game
Sets audio optimized for a specific genre.
Vivid
Delivers distinct voices with rich bass and clear, high-pitched sounds.
User Setting
Adjusts the volume to a level of your choice using the User EQ.
User EQ:
- 100 Hz/ 300 Hz/ 1 kHz/ 3 kHz/ 10 kHz : Sets EQ by manual adjustment of
sound bands.
- Reset : Resets the equalizer value changed by the user.
Virtual Surround
LG’s proprietary audio processing technology allows 5.1ch-like surround sound from two
speakers.
* If Clear Voice ll is set to On, Virtual Surround will not be chosen.
Clear Voice ll
Boosts voice clarity.
AV Sync.
Synchronizes video and audio directly when they do not match.
If you set AV Sync. to ON, you can adjust the sound output to the screen image.
Speaker: Adjusts the synchronization of the sound from the speakers. The "-" button makes the
sound output faster and the "+" button slower than the default value.
Bypass : The audio of an external device without audio delay. Audio may be output before video
as it takes time to process video input into the Monitor.
Sound Setting
Digital Audio Input :
- HDMI/Display Port: Outputs the sound of digital signal from HDMI and display ports through the
monitor speaker.
- Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Balance : Adjusts balance between the left and right speakers according to your room
environment.
Speaker : *The external speaker is sold separately.
- On: Outputs the sound through the external speaker connected to the speaker out port of the
monitor.
- Off: Does not output the sound through the external speaker connected to the speaker out port
of the monitor. Use this option when using an external sound device.
NOTE
The remote control does not have hotkey to Sound Mode.
yy
ENG
ENGLISH
1 Press the Navigation buttons to scroll to SOUND.
38
CUSTOMIZING SETTINGS
TIME settings
TIME
ENGLISH
ENG
1 Press the Navigation buttons to scroll to TIME.
Clock
Off Time
: Off
2 Press the Navigation buttons to scroll to the setting
OnTime
: Off
Sleep Timer
: Off
Power On Delay
: Off
Auto Off
: Off
Automatic Standby
: Off
or option you want and press OK.
-To return to the previous level, press BACK.
3 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available TIME settings are described in the following:
Setting
Description
Clock
Checks or changes the time.
Off Time/ On Time
Sets the Off/On time.
Sleep Timer
Turns off the Monitor after a preset number of minutes.
Power On Delay
When connecting multiple monitors and turning the power on, the monitors are turned on
individually to prevent overload.
Auto Off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in off mode automatically.
NOTE
To use Off Time/ On Time, set the current time correctly.
yy
Off Time/ On Time can be saved for up to seven schedules; the Monitor is turned on or off at the
yy
preset time in the schedule list. If multiple preset times are stored in the schedule list, this function
works at the nearest time from the current time.
The scheduled power-off function works properly only when the device time is set correctly.
yy
When the scheduled power-on and power-off times are the same, the power-off time has priority over
yy
the power-on time if the set is turned on, and vice versa if the set is turned off.
The Automatic Standby and Auto off functions may not be available in some countries.
yy
The remote control does not have hotkey to Sleep Timer.
yy
CUSTOMIZING SETTINGS
OPTION settings
39
OPTION
Power Indicator
2 Press the Navigation buttons to scroll to the setting
or option you want and press OK.
-To return to the previous level, press BACK.
3 When you are finished, press EXIT.
ISM Method
: Normal
Key Lock
: Off
Fail Over
: Off
Portrait Mode
: Off
DPM Select
: Off
DivX(R) VOD
When you return to the previous menu, press BACK.
SimpLink
Initial Setting
Set ID
:1
PC Power Control
: Off
Interface Select
: RS232C
The available OPTION settings are described in the following:
Setting
Description
Language
Selects a language for the display text.
Power Indicator
Turns the standby light in the front panel of the Monitor on/off.
ISM Method
This function removes image sticking which is caused by prolonged display of static images.
Setting
Normal
Minimizes image sticking by gradually lowering the brightness when
displaying static images and by increasing the brightness when displaying
moving images.
Color Wash
Removes image sticking by moving every pixel in a certain pattern on the
screen for a specific period of time. Please use this function to remove
temporary image sticking.
Key Lock
Key input does not work. This prevents invalid key input.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
Setting
Turns off Fail Over.
Auto
Attempts to find another input source having video signal according to the
defined input order if no video signal comes from the current input source.
Manual
The input source changes according to the specified order.
If there is no video signal from the specified input source, then the current
input source remains.
Rotate OSD clockwise (90°,270°)
Option
90°
Rotate OSD clockwise 90°.
270°
Rotate OSD clockwise 270°.
Turns the energy saving mode on/off.
Speaker
Digital Audio Out
Sound Mode
Balance
AUDIO
Clear Voice II
Balance
Sound Mode
AUDIO
Digital Audio Out
Speaker
90°
DPM Select
Clear Voice II
Portrait mode
(Only 84WS70MS
supports this
function.)
Off
270°
ENG
ENGLISH
Language
1 Press the Navigation buttons to scroll to OPTION.
40
CUSTOMIZING SETTINGS
Setting
Description
ENGLISH
ENG
DivX(R) VOD
Registers or releases DivX.
Checks DivX Registration Code for playing DivX-protected videos.
Register at http://vod.divx.com .
Uses Registration Code to rent or purchase movies at www.divx.com/vod .
* Rented/purchased DivX files cannot be played if the DivX Registration Code of a different device
is used. Use only the DivX Registration Code granted to this device.
* Converted files not conforming to the DivX Codec Standard may not play or may produce
abnormal images and sound.
SimpLink
SimpLink is a feature that enables you to control and manage various multimedia devices
conveniently using the Monitor remote control.
Initial Setting
Deletes all optional settings and returns to initial default mode.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
PC Power Control Controls the power of the monitor with Media Player turned on.
On: Turns on or off the monitor with Media Player on.
Off: Turns on or off the whole system.
Interface Select
Sets communication with Media Player and the connected PC.
Option
RS232C
Communicates with the connected PC in serial mode.
SuperSign
Communicates with Media Player.
NOTE
The ISM Method function does not work properly in Portrait Mode.
yy
84WS70BS does not support the Portrait Mode function.
yy
CUSTOMIZING SETTINGS
NETWORK settings
41
NETWORK
Network Status
2 Press the Navigation buttons to scroll to the setting
or option you want and press OK.
-To return to the previous level, press BACK.
3 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available NETWORK settings are described in the following:
Setting
Description
Network
Connection
Configure the network settings.
Network Status
Display the network status.
SUPPORT settings
SUPPORT
Product/Service Info.
1 Press the Navigation buttons to scroll to SUPPORT.
2 Press the Navigation buttons to scroll to the setting
or option you want and press OK.
-To return to the previous level, press BACK.
3 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available SUPPORT settings are described in the following:
Setting
Product/Service
Info.
Description
Displays the model name, software version, serial number, used time, MAC address and homepage information.
ENG
ENGLISH
Network Connection
1 Press the Navigation buttons to scroll to NETWORK.
42
MAKING CONNECTIONS
MAKING CONNECTIONS
ENGLISH
ENG
Connect various external devices to the ports on the Monitor’s back panel.
1 Find an external device you want to connect to your Monitor shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI
AV(CVBS)
DVI-D
DVD
HDMI
AV(CVBS)
DVI-D
Speaker
VCR
AV(CVBS)
USB
Memory storage
PC
RGB
DVI-D
HDMI
Display Port
LAN
Camcorder/Camera
HDMI
AV(CVBS)
Gaming device
HDMI
AV(CVBS)
NOTE
If you connect a gaming device to the Monitor, use the cable supplied with the gaming device.
yy
MAKING CONNECTIONS
43
External Device Connection
HDMI connection
Transmits the digital video and audio signals from an external device to the Monitor.
Connect the external device and the Monitor with the HDMI cable as shown on the following illustration.
Back of the product.
(not
included)
(not included)
NOTE
Use a High Speed HDMI®/™ Cable.
yy
High Speed HDMI®/™ Cables are tested to carry an HD signal up to 1080p and higher.
yy
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the
yy
screen may not display or a connection error may occur.
Recommended HDMI cable types
yy
-High-Speed HDMI®/™ Cable
-High-Speed HDMI®/™ Cable with Ethernet
ENG
ENGLISH
Connect a HD receiver, DVD, or VCR player to the Monitor and select an appropriate input mode.
44
MAKING CONNECTIONS
AV(CVBS) connection
ENGLISH
ENG
Transmits the analog video and audio signals from an external device to the Monitor.
Connect the external device and the Monitor with the 15 pin signal to RCA cable as shown on the following
illustration.
Back of the product.
(not included)
AUDIO
OUT
VIDEO
OUT
(not included)
MAKING CONNECTIONS
Connecting to a USB
or
Connecting to the LAN
ENG
ENGLISH
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor and
access the USB menu to use various multimedia
files.
45
A Connect PC to Monitor directly.
LAN
Monitor
PC
B Using a router(Switch)
LAN
Switch
Monitor
Network
PC
Network
C Using the Internet.
LAN
Network
Monitor
PC
NOTE
Using LAN establishes communication
yy
between your PC and the monitor and
enables you to use the OSD menus on the
PC as well as on the monitor.
46
MAKING CONNECTIONS
Daisy Chain Monitors
ENGLISH
ENG
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
To use different products connected to each other connect one end of the signal input cable (15-pin D-Sub
Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector
of other products
Monitor 1
Monitor 2
(not included)
Monitor 3
(not included)
Monitor 4
(not included)
15-pin D-Sub Signal Cable
(Max 3m)
(not included)
RGB OUT (PC)
RGB
Mode
NOTE
The number of monitors that can be connected to one output may vary depending on signal status
yy
and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to
9 monitors. If you want to connect more than this number of monitors, it is recommended to use a
distributor.
When multi-connecting in/out cascade format, no loss cables are recommended.
yy
When using an HDMI - DVI conversion cable or a gender, it may not be compatible with the product
yy
due to the characteristics of the signal.
TROUBLESHOOTING
47
No image is displayed
Problem
Is the product power cord
connected?
Is the power indicator light on?
ower is on, power indicator
P
is red but the screen appears
extremely dark.
The power indicator amber?
oes the 'Out of range'
D
message appear?
oes the 'Check signal cable'
D
message appear?
Resolution
yy See if the power cord is properly connected to the outlet.
yy See if the power switch is turned on.
yy May need service.
yy Adjust brightness and contrast again.
yy Backlight may need repair.
yy If the product is in power saving mode, move the mouse or press any
key.
yy Turn both devices off and then back on.
yy The signal from the PC (graphic card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency range
by referring to the Specifications in this manual.
yy The signal cable between PC and product is not connected. Check
the signal cable.
yy Press the 'INPUT' menu in the remote Control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
yy See if the plug&play function is supported by referring to the graphic
card user manual.
'Key Lock On' message appears.
Problem
The 'Key Lock On' message
appears when pressing the
Menu button.
Resolution
The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
ENG
ENGLISH
TROUBLESHOOTING
48
TROUBLESHOOTING
The screen image looks abnormal.
ENGLISH
ENG
Problem
Resolution
Is the screen position wrong?
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Position] in OSD menu.
yy See if the graphic card resolution and frequency are supported by
the product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
yy D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Size] in OSD menu.
Horizontal noise appears or the yy D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Phase] in OSD menu.
The screen is displayed
yy The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
PRECAUTIONS TO TAKE TO PREVENT IMAGE RETENTION
ON THE 84WS70BS MODEL.
If a static image is displayed for an extended period of time, the screen may be damaged and the
yy
image retention can last for a long time or could be permanent. Damage resulting from long-term
static images is not covered by the product warranty.
Do not display a static image on the screen for more than two hour. Displaying images in a 4:3 aspect
yy
ratio for an extended period of time may cause image retention around the border of the screen.
Most third-party products have the same issue and this will not be accepted as a cause for refund or
exchange.
If you wish to display a static image for an extended period of time or install the screen in a portrait
yy
position, please use the 84WS70MS model.
TROUBLESHOOTING
49
The audio function does not work.
No sound?
Resolution
Sound is too dull.
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Adjust the Clear Voice ll, Treble and Bass appropriately.
Sound is too low.
yy Adjust the volume.
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
Screen color is unstable or
yy Check the connection status of the signal cable. Or, re-insert the PC
graphic card.
mono-colored.
Do black spots appear on the
yy Several pixels (red, green, white or black color) may appear on the
screen?
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
When I set Input Label to PC in yy For Windows 7, go to Start -> 'Control Panel' -> 'Appearance and
the Input List, some letters are
Personalization' -> 'Font' and select 'Adjust ClearType text'.
displayed with a different color
than the original color.
The operation does not work normally.
Problem
The power suddenly turned off.
Resolution
yy Is the sleep timer set?
yy Check the power control settings. Power interrupted
ENG
ENGLISH
Problem
50
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
213 cm Wide TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 213 cm
0.4845 mm (H) x 0.4845 mm (V)
RGB, DVI-D : 1920 X 1080 @60 Hz
HDMI, Display Port : 3840 X 2160 @30 Hz
- It may not be supported depending on the OS or graphic card type.
Recommended Resolution RGB, DVI-D : 1920 X 1080 @60 Hz
HDMI, Display Port : 3840 X 2160 @30 Hz
- It may not be supported depending on the OS or graphic card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Embedded battery
Power
Rated Voltage
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB : 30 kHz to 83 kHz
HDMI,DVI-D, Display Port : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI,DVI-D, Display Port : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
15-pin D-Sub(RGB), HDMI, DVI-D, Composite(AV),
Display Port, RS-232C, LAN, USB, Audio
Applied
100-240 V~ 50/60 Hz 5.7 A
On Mode : 350 W Typ.
Sleep Mode (RGB) : ≤ 1.5 W
Sleep Mode (HDMI, DVI-D, Display Port)
: ≤ 1.5 W (Set Only) / ≤ 2 W (With External Device)
Off Mode : ≤ 0.5 W
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Dimensions
(Width x Height x
Depth) / Weight
1923.4 mm x 1109.4 mm x 101 mm/ 72.9 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
" " refers to alternating current (AC), and " " refers to direct current (DC).
SPECIFICATIONS
RGB (PC) supported mode
51
HDMI/Display Port (PC) supported mode
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 350
31.469
70.8
640 x 480
31.469
59.94
720 x 400
31.468
70.8
800 x 600
37.879
60.317
640 x 480
31.469
59.94
1024 x 768
48.363
60
640 x 480
37.5
75
1280 x 720
44.772
59.855
800 x 600
37.879
60.317
1152 x 864
53.783
59.959
800 x 600
46.875
75
1280 x 960
60
60
832 x 624
49.725
74.55
1280 x 1024
63.981
60.02
1024 x 768
48.363
60
1680 x 1050
65.290
59.954
1024 x 768
60.123
75.029
1920 x 1080
67.5
60
1280 x 768
47.7
60
3840 x 2160
67.5
30
1280 x 960
74.479
75
1360 x 768
47.72
59.799
1280 x 1024
63.981
60.02
1280 x 1024
79.98
75.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
DVI-D (PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1366 x 768
47.7
60
1152 x 864
53.783
59.959
1280 x 960
60
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
NOTE
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
ENG
ENGLISH
Resolution
52
SPECIFICATIONS
DTV Mode
ENGLISH
ENG
Resolution
HDMI, Display Port (DTV)
480i
x
480p
o
576i
x
576p
o
720p
o
1080i
o
1080p
o
2160p
o
Power Indicator
Mode
Product
On Mode
Sleep Mode
Off Mode
Red
Amber
-
NOTE
When the cable is connected to the HDMI or
yy
the Display port, you can select the PC/DTV
mode optionally. It is recommended you to
set to the PC mode when connecting to PC;
the DTV mode when connecting to DTV.
SPECIFICATIONS
53
Dimensions
101
51
71.1
80.7
(Unit : mm)
101
1923.4
27.9
1109.4
27.9
51
27.9
27.9
600
4-M8 (Wall mounting screw)
Depth 19.8 mm (Max)
400
354.7
661.7
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
ENG
ENGLISH
The illustrations in this manual may differ from the actual product and accessories.
Please see the "Mounting on a wall" section for sizes of screws.
54
IR CODES
IR CODES
ENGLISH
ENG
Code (Hexa)
Function
Note
95
R/C BUTTON
08
R/C BUTTON
ON/OFF
0B
R/C BUTTON
C4
R/C BUTTON
(Discrete IR Code)
C5
R/C BUTTON
(Discrete IR Code)
43
R/C BUTTON
40
Up
R/C BUTTON
41
Down
R/C BUTTON
07
Left
R/C BUTTON
06
Right
R/C BUTTON
44
R/C BUTTON
28
R/C BUTTON
5B
R/C BUTTON
4D
R/C BUTTON
02
Volume
R/C BUTTON
03
Volume
R/C BUTTON
09
R/C BUTTON
E0
(
UP)
E1
(
Down) R/C BUTTON
to
R/C BUTTON
10 to 19
Number Key
72
Red Key
R/C BUTTON
71
Green Key
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
7B
R/C BUTTON
The current model does not support this function.
76
(4:3)
Discrete IR Code
77
(16:9)
Discrete IR Code
AF
(ZOOM,Cinema Zoom 1)
Discrete IR Code
79
99
R/C BUTTON
(Discrete IR Code)
Auto Config.
R/C BUTTON
(Discrete IR Code)
B1
R/C BUTTON
B0
R/C BUTTON
BA
R/C BUTTON
8F
R/C BUTTON
8E
R/C BUTTON
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
yy
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
Monitor 1
PC
Monitor 2
Monitor 3
Monitor 4
RS-232C Cable (not included)
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
Set
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
Communication Parameter
Baud Rate : 9600 BPS
yy
Data Length : 8 bit
yy
Parity Bit : None
yy
Stop Bit : 1bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
3-Wire Configurations (Not Standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
Set
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
55
56
CONTROLLING THE MULTIPLE PRODUCT
Command reference list
ENGLISH
ENG
COMMAND
DATA
1
2
01 Power
k
a
00H to 01H
02 Aspect Ratio
k
c
01H to 1FH
03 Screen Mute
k
d
00H to 01H
04 Volume Mute
k
e
00H to 01H
05 Volume Control
k
f
00H to 64H
06 Contrast
k
g
00H to 64H
07 Brightness
k
h
00H to 64H
08 Color
k
i
00H to 64H
09 Tint
k
j
00H to 64H
10 Sharpness
k
k
00H to 32H
11 OSD Select
k
l
00H to 01H
12 Remote Lock/ key Lock
k
m
00H to 01H
13 Audio Balance
k
t
00H to 64H
14 Abnomal state
k
z
FFH
15 White Balance Red Gain
j
m
00H to FEH
16 White Balance Green Gain
j
n
00H to FEH
17 White Balance Blue Gain
j
o
00H to FEH
18 ISM Method
j
p
20H, 08H
19 Energy Saving
j
q
00H to 05H
20 Auto configuration
j
u
01H
21 Remote Key
m
c
Refer to Remote Key code
22 Backlight
m
g
00H to 64H
23 Fail Over Select
m
i
00H to 02H
24 Fail Over Input Select
m
j
Refer ’Fail Over Input Select’
25 Automatic Standby
m
n
00H to 01H
26 PC Power Control
d
t
00H to 01H
27 PC Power
d
s
00H to 01H
28 Picture mode (PSM)
d
x
00H to 07H
29 Sound mode
d
y
01H to 07H
30 Elapsed time return
d
l
FFH
31 Temperature value
d
n
FFH
32 Speaker
d
v
00H to 01H
33 Sleep Time
f
f
00H to 08H
34 Auto Sleep
f
g
00H to 01H
35 Power On Delay
f
h
00H to 64H
36 Language
f
i
00H to 12H
37 DPM Select
f
j
00H to 01H
38 Reset
f
k
00H to 02H
39 Power Indicator(Standby Light)
f
o
00H to 01H
40 Power Indicator(Power Light)
f
p
00H to 01H
41 Serial no.
f
y
FFH
CONTROLLING THE MULTIPLE PRODUCT
COMMAND
DATA
2
42 S / W Version
f
z
FFH
43 Time 1(Years/ Months/ Days)
f
a
Refer to ‘Time 1’
44 Time 2(Hours/ Minutes/Seconds)
f
x
Refer to ‘Time 2’
45 Off Time Schedule
f
c
00H to 01H
46 On Time Schedule
f
b
00H to 01H
47 Off Timer(Repeat mode/ Time)
f
e
Refer to ‘Off Timer’
48 On Timer(Repeat Mode/ Time)
f
d
Refer to ‘On Timer’
49 On Timer Input
f
u
Refer to ‘On Timer Input’
50 H Position
f
q
00H to 64H
51 V Position
f
r
00H to 64H
52 H Size
f
s
00H to 64H
53 Input Select
x
b
20H to D0H
54 Color Temperature
x
u
00H to 64H
Note : When using the product with a USB DivX player, all commands except for Power (k a), Key (m c),
yy
Abnormal state (k z), Elapsed time return (d l), Temperature value (d n), Serial no.Check (f y) and S/W
Version (f z) are not executed and handled as errors.
ENG
ENGLISH
1
57
58
CONTROLLING THE MULTIPLE PRODUCT
Transmission/ Receiving protocol
ENGLISH
ENG
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to z)
* [Set ID]: Set up the Set ID number of product.
range : 01H to 63H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack
message. Because all sets will send the ack message, so it's impossible the check the whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return (ASCII code '0 x 0 D')
* [ ]: ASCII code Space (0 x 20)
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of
the PC computer.
* Note : In this mode, display will send the acknowledgement after power on processing completion.
There might be a time delay between command and acknowledgement.
* No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to ‘00’(=0x00).
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
CONTROLLING THE MULTIPLE PRODUCT
* Real data mapping
Decimal Num.
(Real Value)
0
0
A
10
F
15
10
16
20
32
64
100
FE
254
FF
255
01. Power(Command: k, a)
To control Power On/Off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data
00: Power Off
01: Power On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
03. Screen Mute(Command: k, d)
To select screen mute on / off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data
00: Screen on
01: Screen off
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
04. Volume Mute(Command: k, e)
To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
00: Volume Mute On (Volume Off)
01: Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
* The normal acknowledgement signal returns
after the power of the set is turned on completely.
* There might be a time delay between
the transmission and acknowledgement signals.
02. Aspect Ratio(Command: k, c)
To adjust the screen format.
You can also adjust the screen format using the
ARC(Aspect Ratio Control) button on remote control
or in the Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
01: Normal Screen(4:3)
02: Wide Scran(16:9)
04: Zoom(AV, Component, HDMI/ Display Port DTV)
06: Original
09: Just Scan(HDMI1/ HDMI2/ DVI/ Display Port
-DTV)
* Available only with 720p or higher.
10 to 1F: Cinema Zoom 1 to 16(AV, HDMI1/HDMI2/
DVI/Display Port -DTV)
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control(Command: k, f)
To adjust Volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H : 0~100
* Refer to 'Real data mapping’.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Hexadecimal Num.
(Setting Value)
59
60
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
06. Contrast(Command: k, g)
To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H : 0~100
* Refer to 'Real data mapping’.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness(Command: k, h)
To adjust screen brightness.
You can also adjust the brightness in the Picture
menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H : 0~100
* Refer to 'Real data mapping’.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Color(Command: k, i)
To adjust the screen color.
You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H : 0~100
* Refer to 'Real data mapping’.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint(Command: k, j)
To adjust the screen tint.
You can also adjust the tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H
00H: Step R50
64H: Step G50
* Refer to 'Real data mapping’.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness(Command: k, k)
To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture
menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 32H : 0~50
* Refer to 'Real data mapping’.
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select(Command: k, l)
To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data
00: OSD Off
01: OSD On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
15. White Balance Red Gain(Command: j, m)
To adjust white balance red gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data
00~FE: Red gain 0~254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
13. Balance(Command: k, t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H
00H: Step L50
64H: Step R50
* Refer to 'Real data mapping’.
16. White Balance Green Gain(Command: j, n)
To adjust white balance green gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data
00~FE: Green gain 0~254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
14. Abnormal state(Command: k, z)
Used to Read the power off status when Stand-by
mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check the status
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Normal (Power on and signal exist)
01: No signal (Power on)
02: Turn the monitor off by Remote Control
03: Turn the monitor off by Sleep Timer function
04: Turn the monitor off by RS-232C function
08: Turn the monitor off by Off Time function
09: Turn the monitor off by Auto Off function
17. White Balance Blue Gain(Command: j, o)
To adjust white balance blue gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data
00~FE: Blue gain 0~254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
12. Remote Lock /Key Lock(Command: k, m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the
remote control and the local keys.
61
62
CONTROLLING THE MULTIPLE PRODUCT
18. ISM Method(Command: j, p)
Used to select the afterimage preventing function.
ENGLISH
ENG
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
20: Color Wash
08: Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
19. Energy Saving(Command: j, q)
To reduce the power consumption of the Monitor.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
04: Auto
00: Off
01: Minimum
02: Medium
03: Maximum
05: Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
20. Auto Config.(Command: j, u)
To adjust picture position and minimize image
shaking. Automatically.
* Only applies to RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data
01: To set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
21. Remote Key(Command: m, c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data: Refer to ‘IR CODES’.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
22. Backlight(Command: m, g)
To adjust light of the Backlight.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H : 0~100
* Refer to 'Real data mapping’.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
* If Energy Saving is set to Auto/ Maximum/ Screen
off the Backlight function is disabled.
23. Fail Over Select(Command: m, i)
To select Fail Over mode.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ]
[Data4][ ][Data5][Cr]
Data1~5(Priority 1~5)
60: RGB
70: DVI-D
90: HDMI1
91: HDMI2
C0: Display Port
* Use 0x70 as data for DVI-D input, 0x90 as data for
HDMI1 input, 0x91 as data for HDMI2 input, 0xC0
as data for DisplayPort input, regardless their input
labels.
27. PC Power(Command: d, s)
To control the PC power when the PC and the
monitor are not synchronized.
Transmission
[d][s][ ][Set ID][ ][Data][Cr]
Data
00: PC it turned off.
01: PC is turned on.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2]
[Data3][Data4][Data5][x]
25. Automatic Standby(Command: m, n)
To set the Automatic Standby function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data
00: Off (The Automatic Standby function is not
used)
01: 4 hours (The set is turned off after four hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
26. PC Power Control(Command: d, t)
To control the PC power if the PC and the monitor
are synchronized.
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
Data
00: Synchronized (When the monitor is off, the PC
is also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
28. Picture Mode(Command: d, x)
To adjust the picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data Structure
Data (Hex)
Mode
00
Vivid
01
Standard
02
Cinema
04
Game
05
Expert1
06
Expert2
07
Intelligent Sensor
* If you select Intelligent Sensor, you cannot adjust
Contrast, Brightness, Color, Tint, Sharpness, and
Color Temp.
* If you select Cinema, Expert1, or Expert2,
you cannot adjust Color Temp.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
24. Fail Over Input Select(Command: m, j)
To select fail over mode.
* Only available in Fail Over is Manual mode.
63
64
CONTROLLING THE MULTIPLE PRODUCT
29. Sound Mode(Command: d, y)
To adjust the Sound mode.
32. Speaker(Command: d, v)
Turn the speaker on or off.
ENGLISH
ENG
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data Structure
Data(Hex)
Mode
01
Standard
02
Music
03
Cinema
04
Sport
05
Game
06
Vivid
07
User Setting
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
33. Sleep Timer(Command: f, f)
Set Sleep Timer.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
30. Elapsed time return(Command: d, l)
To read the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data
FF: Read the elapsed time
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
31. Temperature value(Command: d, n)
To read the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data
FF: Check the temperature
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Off
01: 10 minutes
02: 20 minutes
03: 30 minutes
04: 60 minutes
05: 90 minutes
06: 120 minutes
07: 180 minutes
08: 240 minutes
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
34. Auto Sleep(Command: f, g)
To set Auto Sleep.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data
00: Off (The Auto Off function is not used)
01: 15 min. (If there is no signal for 15 minutes, the
set is turned off)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H : 0~100 seconds
* Refer to 'Real data mapping’.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
36. Language(Command: f, i)
Set the OSD language.
38. Reset(Command: f, k)
Execute the Picture, Screen and Factory Reset
functions.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
00 : Picture Reset
(Reset the values set in the PICTURE menu.)
01 : Screen Reset
(Reset the values set in under the Screen option.)
02 : Factory Reset
(Reset the values set in the OPTION menu.)
03 : Audio Reset
(Reset the values set in the AUDIO menu.)
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish(EU)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0a: Portuguese(EU)
0b: Portuguese(Brazil)
0c: Russian
0d: Finnish
0e: Swedish
0f Korean
10: Simplified Chinese
11: Japanese
12: Traditional Chinese
39. Power Indicator(Standby Light)(Command: f,
o)
To set the Standby Light.
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
40. Power Indicator(Power Light)(Command: f, p)
To set the Power Light.
Transmission
[f][p][ ][Set ID][ ][Data][Cr]
37. DPM Select(Command: f, j)
Set the DPM (Display Power Management) function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Off
01: On
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
35. Power On Delay(Command: f, h)
Set the schedule delay when the power is turned on
(Unit: second).
65
66
CONTROLLING THE MULTIPLE PRODUCT
41. Serial no.Check(Command: f, y)
Check the Serial no.
ENGLISH
ENG
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data
FF: Check the Serial no.
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x]
44. Time 2(Hours/Minutes/Seconds)(Command: f, x)
To set Time 2 (Hours/ Minutes/ Seconds).
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
00 - 17: 00 - 23 hours
Data2
00 - 3B: 00 - 59 minutes
Data3
00 - 3B: 00 - 59 seconds
* To check the settings of the Time 2, enter "fx [Set
ID] ff".
** If the Time 1 is not set, this command does not
work.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
42. S/W Version(Command: f, z)
Check the software version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check the software version.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
43. Time 1(Year/ Month/ Day)(Command: f, a)
To set the Time 1(Year/ Month/ Day) values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
00 to 1E: 2010 to 2040
Data2
01 to 0C: January to December
Data3
01 to 1F: 1th to 31th
* Enter “fa [Set ID] ff” for checking Time 1 values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
45. Off Time Schedule(Command: f, c)
To set whether to activate the Off Time schedule.
Transmission
[f][c][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
46. On Time schedule(Command: f, b)
To set whether to activate the On Time schedule.
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
47. Off Timer(Repeat mode/Time)(Command: f, e)
To set Off Time (Repeat mode/Time).
Data1
01: Once
02. Daily
03: Mon. - Fri.
04: Mon. - Sat.
05: Sat. - Sun.
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 - 17: 00 - 23 hours
Data3
00 - 3B: 00 - 59 minutes
* If Time 1, 2 are not set, this command does not
work.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
To check Off Time (Repeat mode/Hours/Minutes).
Transmission
[f][e][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data1
f1-f7: The first to the seventh index number of the Off
Time list
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3]
[Data4][x]
Data1
f1-f7: The first to the seventh index number of the Off
Time list
Data2
01: Once
02. Daily
03: Mon. - Fri.
04: Mon. - Sat.
05: Sat. - Sun.
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data3
00 - 17: 00 - 23 hours
Data4
00 - 3B: 00 - 59 minutes
To delete Off Time (Repeat mode/Hours/Minutes).
Transmission
[f][e][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data
e0: Delete all
e1 - e7: Delete from the first to the seventh index of
the Off Time list
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][ff][ff][x]
Data
e0: Delete all
e1 - e7: Delete from the first to the seventh index of
the Off Time list
ENG
ENGLISH
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
67
68
CONTROLLING THE MULTIPLE PRODUCT
48. On Timer(Repeat mode/Time)(Command: f, d)
To set On Time (Repeat mode/Time).
ENGLISH
ENG
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
01: Once
02. Daily
03: Mon. - Fri.
04: Mon. - Sat.
05: Sat. - Sun.
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 - 17: 00 - 23 hours
Data3
00 - 3B: 00 - 59 minutes
* If Time 1, 2 are not set, this command does not
work.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
To check On Time (Repeat mode/Hours/Minutes).
Transmission
[f][d][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data1
f1-f7: The first to the seventh index number of the On
Time list
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3]
[Data4][x]
Data1
f1-f7: The first to the seventh index number of the On
Time list
Data2
01: Once
02. Daily
03: Mon. - Fri.
04: Mon. - Sat.
05: Sat. - Sun.
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data3
00 - 17: 00 - 23 hours
Data4
00 - 3B: 00 - 59 minutes
To delete On Time (Repeat mode/Hours/Minutes).
Transmission
[f][d][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data
e0: Delete all
e1 - e7: Delete from the first to the seventh index of
the Off Time list
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][ff][ff][x]
Data
e0: Delete all
e1 - e7: Delete from the first to the seventh index of
the On Time list
CONTROLLING THE MULTIPLE PRODUCT
49. On Timer Input(Command: f, u)
Select the video input when using On Timer.
Data
20: AV
60: RGB
70: DVI-D
90: HDMI1
91: HDMI2
C0: Display Port
B0: SuperSign
* If the Time 1, 2, and On Time (Repeat mode/Time)
are not set, this command does not work.
* To set the On Time schedule correctly, the On Timer
(Repeat mode/Time) command must be executed
prior to this command.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
To check the On Timer Input settings.
Transmission
[f][u][ ][Set ID][ ][Data][ ][f][f][Cr]
Data1
f1-f7: The first to the seventh index number of the On
Time Input list
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data1][Data2]
Data1
The first to the seventh index number of the On Time
Input list
Data2
20: AV
60. RGB
70: DVI
90: HDMI1
91: HDMI2
C0: Display Port
B0: SuperSign
51. V Position(Command: f, r)
To set the vertical position of the screen.
* This function is only available when there is RGB
input signal.
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H: Min. -50 (down) - Max. 50 (up)
* Data input range may vary depending on the resolution.
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
52. H Size(Command: f, s)
To set the horizontal size of the screen.
* This function is only available when there is RGB
input signal.
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H: Min. -50 (Zoom out) - Max. 50
(Zoom in)
* Data input range may vary depending on the resolution.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
53. Input Select(Command: x, b)
To select input source for the Set.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
50. H Position(Command: f, q)
To set the horizontal position.
* Only available when Tile Mode is off.
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data
Min. 00H to Max. 64H: Min. -50 (Left) - Max. 50 (Right)
* Data input range may vary depending on the resolution.
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
Data
20: AV
60: RGB-PC
70: DVI-D(PC)
80: DVI-D
90: HDMI1
91: HDMI2
A0: HDMI1(PC)
A1: HDMI2(PC)
B0: SuperSign(PC)
C0: Display Port
D0: Display Port(PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[f][u][ ][Set ID][ ][Data][Cr]
69
70
CONTROLLING THE MULTIPLE PRODUCT
54. Color Temperature(Command: x, u)
To adjust the screen color temperature.
ENGLISH
ENG
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data
00~64: Warm 50 ~ Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com . In addition to
the source code, all referred license terms,
warranty disclaimers and copyright notices are
available for download. LG Electronics will also
provide open source code to you on CD-ROM
for a charge covering the cost of performing
such distribution (such as the cost of media,
shipping, and handling) upon email request
to opensource@lge.com . This offer is valid
for three (3) years from the date on which you
purchased the product.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.
Temporary noise is normal when powering ON or
OFF this device.
Download PDF

advertising