LG | KT-T32E | LG KT-T43E Owner’s Manual

OWNER’S MANUAL
Multi-touch
Overlay Kit
Please read this manual carefully before operating your set and retain it for future reference.
KT-T32E
KT-T55E
KT-T43E
KT-T65E
KT-T49E
KT-T75E
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
2
ENGLISH
TABLE OF CONTENTS
SAFETY PRECAUTIONS..............3
ASSEMBLY AND
PREPARATION.............................4
--Applicable models........................................................ 4
--Accessories...................................................................... 4
--Precaution When Using the Touch Pen............ 6
--Portrait Layout.............................................................. 7
--Assembly Instructions............................................... 8
HOW TO ATTACH THE IR......... 16
INSTALLATION INSTRUCTIONS...17
--Connecting Touch USB Cable............................. 17
BEFORE USE............................. 18
PRODUCT SPECIFICATIONS.... 19
--Touch Specifications................................................ 19
--Product Specifications........................................... 19
--OS Support Availability.......................................... 20
--Product Dimensions................................................ 21
TROUBLESHOOTING................ 27
3
CAUTION
• Always use genuine components to ensure safety and product performance.
• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
• The accessories provided with your product may vary depending on the model or region.
• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
SAFETY PRECAUTIONS
• f you are a professional installer, please read this manual carefully before installing the product.
• If you are a professional installer, please give this manual to the user after installation and ensure that the user also
reads the manual carefully and retains it for future reference.
• After reading the manual, please keep it handy for future reference.
WARNING
• The product should be installed by a qualified professional specified by the retail store.
-- Product installation by non-qualified personnel is very dangerous and may cause personal injury.
• When moving or replacing the product after installation, contact a qualified installer specified by the retail store.
-- Installation or movement of the product must be carried out by a skilled professional. If an unqualified person moves
or installs the product, it may cause safety risks.
• Do not hang the power cable and signal cable on the back of the monitor when mounting the monitor to the wall.
-- Damaged cables may result in fire, electric shock, or damage to the product.
-- Keep the monitor upright when mounting the monitor to the wall.
• The product should be installed where its weight can be fully supported.
-- If the product is installed on a weak surface, the product may fall, causing injury.
-- Check the maximum allowed weight of the wall mount (total weight is 75 kg).
• Do not hang on this product. Protect it from severe impact after installation.
-- The product may fall and cause injury.
• Models attached to the Multi-touch Overlay Kit cannot be installed on stands.
-- The product may fall.
ENGLISH
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause
radio interference.
4
ENGLISH
ASSEMBLY AND PREPARATION
Applicable models
• KT-T32E, KT-T43E, KT-T49E, KT-T55E, KT-T65E :
Applicable only for **SH7E, **SH7ED, **SM5E, **SE3E, **SL5E, **SH7DD, **SM5D, **SM5KD, **SE3D, **SE3KD,
**SM5C, **SM5KC, **SM3C, **SE3C, **SE3KC, **SM5B, **SM5KB, **SM3B, **SE3B, **SE3KB, **SL5B (except for
32SL5B).
• KT-T75E : Applicable only for 75UH5C and 75UM3C.
• Applicable models may be added.
• For details about applicable models, contact the retail store.
Accessories
• Check your product box for the following items. If there are any missing accessories, contact the local dealer where
you purchased your product.
• The illustrations in this manual may differ from the actual product and accessories.
• Extra screws are provided for user convenience.
KT-T32E
CD (Owner’s Manual)/
Cards
Fixer Top (2 ea)
Fixer Side (2 ea)
IR Bracket (1 ea)
Ø3 x L6 Screw (1 ea)
M4 x L6 Screw (13 ea)
Fixer Bottom Center (1 ea)
KT-T43E / KT-T49E
CD (Owner’s Manual)/
Cards
Fixer Top (3 ea)
Fixer Side (4 ea)
IR Bracket (1 ea)
Ø3 x L6 Screw (1 ea)
M4 x L6 Screw (19 ea)
Fixer Bottom Center (1 ea)
5
KT-T55E / KT-T65E
ENGLISH
CD (Owner’s Manual)/
Cards
Fixer Top (3 ea)
Fixer Side (4 ea)
Fixer Bottom (2 ea)
Fixer Bottom Center (1 ea)
Ø3 x L6 Screw (1 ea)
M4 x L6 Screw (23 ea)
IR Bracket (1 ea)
KT-T65E only
Pen Tray (1 ea)
M4 x L8 Screw (2 ea)
Touch Pen (2 ea)
KT-T75E
CD (Owner’s Manual)/
Cards
Fixer Top (3 ea)
Fixer Side (4 ea)
Fixer Bottom (1 ea)
IR Bracket (1 ea)
M3 x L5.5 Screw (1 ea)
M4 x L6 Screw (19 ea)
M4 x L8 Screw (2 ea)
Pen Tray (1 ea)
Touch Pen (2 ea)
6
ENGLISH
Precaution When Using the Touch Pen
(KT-T65E, KT-T75E only)
If you hold down below the guide line when using the touch pen, it may occur a break or touch error.
Guide line
7
When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen).
NOTE
• The Pen Tray can only be used in the landscape position.
ENGLISH
Portrait Layout
8
ENGLISH
Assembly Instructions
• The picture may differ from the actual product.
NOTE
• Before installing the product, if there are any water drops or foreign materials on the inner/outer side of the glass,
wipe them out with a soft cloth.
• While using the product, if there are any water drops or foreign materials on the inner/outer side of the glass, wipe
them out with a soft cloth and install it again.
• Assemble the product in a clean, uncontaminated area to prevent dust or foreign material from entering it.
1 Place a soft cloth on the table and place the Multi-touch Overlay Kit over it as illustrated.
2 Remove the internal protective film using the handle at the upper right corner of the glass as illustrated.
9
3 Place a soft cloth on another table, place the display product as shown, and remove the LG Logo Bracket.
4 Place the display product on the Multi-touch Overlay Kit as illustrated.
ENGLISH
-- For models with LG Logo Brackets only.
-- The image may be different according to the model.
10
5 Use the screws (M4 x L6) to attach the Fixer Top.
ENGLISH
KT-T32E
KT-T43E / KT-T49E / KT-T55E / KT-T65E / KT-T75E
11
6 Use the screws (M4 x L6) to attach the Fixer Side.
KT-T43E / KT-T49E / KT-T55E / KT-T65E / KT-T75E
ENGLISH
KT-T32E
12
7 Use the screws (M4 x L6) to attach the Fixer Bottom.
ENGLISH
KT-T32E
KT-T43E / KT-T49E
13
KT-T55E / KT-T65E
ENGLISH
KT-T75E
14
8 Use the screws (M4 x L8) to attach the Pen Tray.
ENGLISH
KT-T65E
KT-T75E
15
9 Remove the external protective film using the handle at the upper right corner of the glass as illustrated.
ENGLISH
16
ENGLISH
HOW TO ATTACH THE IR
The image may be different according to the model.
1 Remove the IR sensor from the set.
2 Attach the IR sensor to the IR bracket.
3 Use the screws (Ø3 x L6) or (M3 x L5.5) to attach the IR sensor to the IR bracket.
•
•
(Ø3 x L6) : KT-T32E / KT-T43E / KT-T49E / KT-T55E / KT-T65E
(M3 x L5.5) : KT-T75E
NOTE
• The IR sensor may differ depending on the model.
or
17
Connecting Touch USB Cable
1 Connect the touch USB cable extending from the side of the product to the PC.
CAUTION
• The product may not work if you use a USB extension cable.
• While connecting a USB cable or within 3 seconds after connecting it, any tapping on the touch screen may not
respond correctly.
2 Connect the TOUCH USB cable on the side of the product to the USB port on the back of the monitor.
CAUTION
• It may not be supported depending on the model.
• The image may be different according to the model.
• If there is a change in installation environment (lights etc.), please remove and reconnect the TOUCH USB cable.
• The touch screen may recognize and respond to a finger or object that is not touching the glass. This is a
characteristic of the IR touch screen.
ENGLISH
INSTALLATION INSTRUCTIONS
18
ENGLISH
BEFORE USE
Set the video mode of the monitor to the Education mode or Game mode.
For details about settings, refer to the owner’s manual of the monitor.
19
Touch Specifications
“ ” refers to alternating current (AC), and “
Multi-touch
Supported Operating
Systems
Touch input method
Touch accuracy
Touch response time
Operating voltage
Power consumption
Rated Voltage
” refers to direct current (DC).
10 points
Windows 7, Windows 8, Windows 8.1, Windows 10, Android (Kernel version 3.5 over),
Linux(Kernel version 3.5 over), Mac OS X (10.9 over)
Pens, fingers, gloves, etc.
2 mm
15 ms
4.75 V
to 5.25 V
1.8 W (Max.)
5V
0.5 A
Product Specifications
Dimensions (width x height x
depth) / Weight
KT-T32E
KT-T43E
KT-T49E
KT-T55E
KT-T65E
KT-T75E
Environmental conditions
Operating
Temperature
Operating
Humidity
Storage
Temperature
Storage
Humidity
768.4 mm x 462.9 mm x 29.3 mm /
4.2 kg (with accessories : 4.6 kg)
1009.6 mm x 597.8 mm x 29.3 mm /
6.4 kg (with accessories : 7.1 kg)
1142.2 mm x 672.4 mm x 29.3 mm /
7.8 kg (with accessories : 8.5 kg)
1278 mm x 748.8 mm x 29.3 mm /
10.2 kg (with accessories : 11.1 kg)
1496.9 mm x 871.9 mm x 29.3 mm /
12.9 kg (with accessories : 14.6 kg)
1722.1 mm x 1000.3 mm x 29.3 mm /
17 kg (with accessories : 18.9 kg)
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 85 %
ENGLISH
PRODUCT SPECIFICATIONS
20
ENGLISH
OS Support Availability
Windows 10
Windows 8
Windows 7 &
Embedded P
Mouse
O
O
O
Mac OS X
Linux2
O1
O
Android2
O
Functions
Click, Drag, DoubleClick
Digitizer
Gestures
O
O
O
O
O
O
*Windows 7 Service Pack must be installed.
O1
O1
O
O
(Kernel 3.5 Over)
O
O
(Kernel 3.5 Over)
Mouse Functions,
Mouse & Digitizer
Right-Click, Flicks,
Functions, Press &
Panning with Inertia
Tap, Rotate, Zoom
In/Out
Plug and Play
O
O
O
O1
O
(Kernel 3.5 Over)
O
(Kernel 3.5 Over)
NOTE
• Windows 2000 and earlier versions of Windows are not supported.
• Operating systems other than Windows 10, Windows 8, Windows 8.1 and Windows 7P may not support multi-touch
functionality.
• 1Driver installation is required. The Mac drivers can be found on the provided CD.
• 2For Android or Linux-powered equipment (set-top boxes etc.), the touch feature may not work if the Touch Driver is
not activated in the operating system.
21
ENGLISH
Product Dimensions
The illustrations in this manual may differ from the actual product and accessories.
The product specifications below may be changed without prior notice due to upgrade of product functions.
KT-T32E
(Unit : mm)
51.2
768.4
32.7
29.3
462.9
32.7
32.7
32.7
74.5
22
KT-T43E
ENGLISH
(Unit : mm)
48.1
1009.6
32.7
597.8
32.7
29.3
32.7
32.7
61.8
23
KT-T49E
48.1
1142.2
32.7
672.4
32.7
29.3
32.7
32.7
61.8
ENGLISH
(Unit : mm)
24
KT-T55E
ENGLISH
(Unit : mm)
48.1
1278
32.7
748.8
32.7
29.3
32.7
32.7
61.8
25
KT-T65E
48.1
1496.9
32.7
29.3
32.7
871.9
32.7
32.7
61.8
ENGLISH
(Unit : mm)
26
KT-T75E
ENGLISH
(Unit : mm)
46
1722.1
32.7
29.3
1000.3
32.7
32.7
32.7
77.3
27
ENGLISH
TROUBLESHOOTING
There is a problem with the touch screen.
Problem
Touch does not respond.
Action
• Remove the USB cable and connect it again in 10 seconds.
• Check the USB cable connection.
-- This may occur when the USB cable between PC and monitor is not connected.
Check the USB cable and make it firmly connected.
*Check the connection on Windows 7, 8, 8.1, 10, Mac OS X (10.9 over).
[Control Panel] → [System and Security] → [System]
-- Check the number of touch-points supported under [Pen and Touch].
• Check the PC power.
-- This may occur when the PC is powered off. Make sure that your PC’s power
cord is firmly plugged into a power outlet.
• Restart your PC.
-- Touch may not respond when the system is down due to the unstable network.
Reconnect the LAN cable or restart your PC.
• Check the signal cable connection.
-- If your PC and monitor are not connected using a signal cable, touch does not
respond. Check the signal cable connection.
• Check the monitor power.
-- Touch may not respond when the monitor is powered off.
• Always connect the power cord to a grounded outlet.
-- If you do not use a grounded outlet, it may cause a break or touch error.
• Check if the screen is currently on.
The location of a touch does
not correspond to the touch
coordinates.
• Change your tablet PC settings (Windows 7, 8, 8.1, 10, Mac OS X (10.9 over)).
-- This may occur when the touch screen is not calibrated properly.
[Control Panel] → [Hardware and Sound] → [Tablet PC Settings] → [Display]
→ [Display options] → [Calibrate] or [Reset]
*For information about gestures and settings on Windows 7, 8, 8.1, 10 ,
Mac OS X (10.9 over) refer to the Windows or Mac Help.
28
ENGLISH
A touch is applied to a
monitor other than the one I
intended.
• Set the monitor as the default monitor.
-- This may occur if the monitor is not set as the default monitor when you are
using multiple monitors. Go to [Control Panel] → [Display] → [Settings tab] →
Select the monitor → [Use this device as the primary monitor (U)] → [Apply
(A)]
• Change your tablet PC settings (Windows 7, 8, 8.1, 10 , Mac OS X (10.9 over)).
-- This may occur when the touch screen is not calibrated properly. Go to [Control
Panel] → [Hardware and Sound] → [Tablet PC Settings] → [Display] →
[Display options] → [Calibrate] or [Reset]
Multi-touch does not respond.
• Make sure that you use a content that supports Multi-touch points in Windows
7, 8, 8.1, 10 , Mac OS X (10.9 over).
-- The content played (e.g. Flash Player, Paint, etc.) may not support Multi-touch
points.
• Remove the USB cable and connect it again in 10 seconds.
• Run the content (e.g. Flash Player, Paint, etc.) again.
• Restart your PC.
• A break or touch error may occur as below case.
-- If using the touch pen only with nail or fingertip
-- If using the touch pen without proper distance between fingers
-- If holding the touch pen or near the tip of the touch pen
-- If using the touch pen while pressing it with strong force on the screen
• On the edge of the touch screen, multi-touch may work unstably.
Make sure to read the Safety Precautions before using
the product.
The model and serial numbers of the SET are located on
the back and one side of the SET. Record it below should
you ever need service.
MODEL
SERIAL
Temporary noise is normal when powering ON or OFF
this device.
Download PDF