LG | IPS277L | LG IPS277L Owner’s Manual

ENGLISH
OWNER’S MANUAL
IPS LED MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
IPS LED MONITOR MODEL
IPS237L
IPS277L
www.lg.com
2
TABLE OF CONTENTS
Contents
ENGLISH
ENG
3
ASSEMBLING AND PREPARING
3
Unpacking
4
Parts and buttons
5
Setting up the Monitor set
5
- Attaching the Stand Base
6
- Detaching the Stand Base
6
- Mounting on a table
7
22 TROUBLESHOOTING
24 SPECIFICATIONS
24
IPS237L
25
IPS277L
26
Preset Modes (Resolution)
- Using the cable holder
26
Indicator
9
USING THE MONITOR SET
27 Proper posture
9
Connecting to a PC
27
9
- D-SUB connection
9
- HDMI connection
10
Connecting to a Mobile Phone
10
- MHL(Mobile High-definition Link) connection
12 CUSTOMIZING SETTINGS
13
Customizing Settings
13
- Menu Settings
14
-PICTURE
15
-COLOR
16
-DISPLAY
16
-VOLUME
17
-OTHERS
18
MY KEY Setting
19
FUNC. Setting
19
-SUPER ENERGY SAVING
20
-DUAL DISPLAY
20
-DUAL WEB
21
-TRUE COLOR FINDER
21
-MY KEY SETTING
Proper posture for using the Monitor set.
ASSEMBLING AND PREPARING
3
ASSEMBLING AND PREPARING
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
or
CD(Owner's Manual) /
Card
D-SUB Cable
(This cable is not included in all
countries.)
MHL Cable
(This cable is not included in all
countries.)
or
Power Cord
AC-DC Adapter
( Depending on the country )
Stand Body
Stand Base
AC-DC Adapter
( Depending on the country )
Two Screws
CAUTION
Do not use any unapproved accessories to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved accessories are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
ENG
ENGLISH
Unpacking
4
ASSEMBLING AND PREPARING
Parts and buttons
ENGLISH
ENG
Power Indicator
yyLighting On: Turned on
yyLighting Off: Turned off
(Power Button)
Button (See p.12)
Connection panel (See p.9)
ASSEMBLING AND PREPARING
Setting up the Monitor set
5
3 Secure the monitor and the Stand Body with
Attaching the Stand Base
1 Place the Monitor set with the screen side
down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
2 Attach the Stand Body to the monitor.
Insert the two Lockers of the Stand Body right
into the groove of the monitor head and secure
them by pressing the left and right bottom
sides.
warning
If you don`t fasten the screw tightly, monitor
will fall down and get damaged.
4 Attach the Stand Base from the Stand Body by
turning the screw to the right with a Coin.
Locker
CAUTION
Tighten the screws firmly to prevent the monitor
from tilting forward. Do not over tighten.
ENG
ENGLISH
the 2 screws.
6
ASSEMBLING AND PREPARING
ENGLISH
ENG
Detaching the Stand Base
Mounting on a table
1 Place the monitor with the screen side down on
1 Lift and tilt the Monitor set into its upright
a flat and cushioned surface.
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
2 Turn the screw to the left, and then pull out the
Stand Base from the Stand Body.
10 cm
10 cm
10 cm
10 cm
3 Remove 2 screws and pull out the Stand Body
from the monitor.
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
or
ASSEMBLING AND PREPARING
3 Press (Power) button on the bottom switch
panel to turn the power on.
7
Using the cable holder
ENG
ENGLISH
CAUTION
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
Cable holder
8
ASSEMBLING AND PREPARING
warning
Using the Kensington security system
ENGLISH
ENG
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
Do not touch or press the screen when
adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor
screen can detach from stand base and injure
your body.
NOTE
The Kensington security system is optional.
You can obtain it from most electronics stores.
NOTE
Tilt from +20 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
Front
Rear
USING THE MONITOR SET
9
USING THE MONITOR SET
Your Monitor set supports Plug & Play*.
yy
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
HDMI connection
Transmits the digital video and audio signals from
your PC or A/V to the Monitor set. Connect the PC
or A/V and the Monitor set with the HDMI cable as
shown in the following illustrations.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
HDMI2/MHL
HDMI1
HDMI2/MHL
HDMI1
NOTE
When using a D-Sub signal input cable
yy
connector for Macintosh
NOTE
Mac adapter
yy
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
If you use HDMI PC, it can cause compatibility
yy
problem.
ENG
ENGLISH
Connecting to a PC
10
USING THE MONITOR SET
Connecting to a Mobile Phone
ENGLISH
ENG
MHL(Mobile High-definition Link) connection
Transmits the digital audiovisual signals from your
mobile phone to the monitor set. Connect the mobile
phone to the monitor set with the MHL cable as
shown in the following illustrations.
HDMI2/MHL
HDMI1
NOTE
Connect the mobile phone to the HDMI2/MHL port
yy
to view the phone screen on the monitor set.
This only works for the MHL supported phone.
yy
USING THE MONITOR SET
CAUTION
NOTE
When you want to use two PC in our Monitor,
yy
please connect the signal cable(D-SUB/
HDMI) respectively in Monitor set.
If you turn the Monitor set on while it is cold,
yy
the screen may flicker. This is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
Self Image Setting Function
Press the power button on the bottom panel to
turn the power on. When monitor power is turned
on, the "Self Image Setting" Function is executed
automatically. (Only supported in Analog Mode)
NOTE
"Self Image Setting" Function.
yy
This function provides the user with optimal
display settings.When the user connects
the monitor for the first time, this function
automatically adjusts the display to optimal
settings for individual input signals.(Only
supported in Analog Mode)
‘AUTO’ Function.
yy
When you encounter problems such as
blurry screen, blurred letters, screen flicker
or tilted screen while using the device or
after changing screen resolution, press the
AUTO function button to improve resolution.
(Only supported in Analog Mode)
ENG
ENGLISH
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
yy
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
11
12
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
ENGLISH
ENG
1 Press the desired button on the bottom of the Monitor set.
2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow (
) button.
3 Select EXIT to leave the OSD menu.
MENU
MY KEY
FUNC.
AUTO
INPUT
EXIT
Monitor set Buttons
Button
Description
Accesses the main menus.(See p.13)
OSD LOCKED/
UNLOCKED
This function allows you to lock the current control settings, so
that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message "OSD
UNLOCKED" should appear.
Use this button to enter MY KEY menu.For more information.(See p.18)
Use this button to enter SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB, TRUE
COLOR FINDER, MY KEY SETTING menus.(See p.19)
When adjusting your display settings, always press the AUTO button. (Only supported in
Analog Mode)
The best display mode 1920 x 1080
You can choose the input signal.
• When two input signals are connected, you can select the input signal (D-SUB/
HDMI1/HDMI2) you want.
• When only one signal is connected, it is automatically detected. The default setting is
D-SUB.
EXIT
Exit the OSD(On Screen Display).
(Power Button)
Turns the power on or off.
Power Indicator
The power indicator stays red if the display is running properly
(On Mode). If the display is in Sleep Mode, the power indicator
blinks red.
CUSTOMIZING SETTINGS
13
Customizing Settings
ENG
ENGLISH
Menu Settings
1 Press MENU button on the bottom of the Monitor set
to display the MENU OSD. 2 Set the options by pressing the ◄ or ► or ▼
buttons.
3 Select the "NEXT MENU" button to enter the more
option settings.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
MENU
Analog HDMI
BRIGHTNESS
●
●
CONTRAST
●
●
WIDE/ORIGINAL
Description
To adjust the brightness, contrast of the screen
WIDE
Switch to full screen mode according to input image signal.
●
●
ORIGINAL
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio
(16:9).
RESET
●
●
MENU > NEXT MENU
PICTURE
SHARPNESS
Analog HDMI
●
Description
●
To adjust the clearness of the screen .
BLACK LEVEL
●
To set offset level
OVER SCAN
●
To improve the clarity and stability of the screen
●
●
To set the response time of displayed picture.
●
●
To customize the color of the screen
RESPONSE TIME
COLOR
Restore all factory default settings. Press the◄ , ► buttons to reset
immediately.
GAMMA
COLOR TEMP
SIX COLOR
COLOR RESET
DISPLAY
HORIZONTAL
VERTICAL
CLOCK
PHASE
●
To adjust the position of the screen
●
To improve the clarity and stability of the screen
VOLUME
OTHERS
●
LANGUAGE ●
●
AUTOMATIC
STANDBY
●
●
BUTTON SOUND
●
●
POWER INDICATOR
Analog: D-SUB(Analog signal) input.
yy
HDMI: HDMI(Digital signal) input.
yy
To adjust the volume
To customize the screen status for a user's operating
environment
14
CUSTOMIZING SETTINGS
PICTURE
ENGLISH
ENG
1 Press MENU button on the bottom of the Monitor set
to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more
option settings.
3 Enter to PICTURE by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► or ▼
buttons.
5 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
MENU > NEXT MENU > PICTURE
Description
SHARPNESS
To adjust the clearness of the screen.
BLACK LEVEL
You can set the offset level. If you select'HIGH', the screen will be bright and if
you select ‘LOW’, the screen will be dark.(only for HDMI input)
* Offset?As the criteria for video signal, it is the darkest screen the monitor can
show.
OVER SCAN
To select the range of output image for DTV timing in HDMI input.(only for HDMI
input)Recommend overscan function to turn on when connect AV equipment.
RESPONSE TIME
You can set a response time for displayed pictures based on the speed of the
screen. For a normal environment, it is recommended that you use 'NORMAL'.
For a fast-moving picture, it is recommended that you use 'FAST'.
CUSTOMIZING SETTINGS
15
COLOR
ENG
ENGLISH
1 Press MENU button on the bottom of the Monitor set
to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more
option settings.
3 Select COLOR by pressing the ► button.
4 Enter to COLOR by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► or ▼
buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
MENU > NEXT MENU > COLOR
Description
GAMMA
Set your own gamma value. : GAMMA 0, GAMMA 1, GAMMA 2 on the monitor,
high gamma values display whitish images and low gamma values display
blackish images.
COLOR TEMP
CUSTOM
• RED:Set your own red color levels.
• GREEN: Set your own green color levels.
• BLUE:Set your own blue color levels.
Select the screen color. WARM: Set the screen to warm color temperature (more red). MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature (more blue).
SIX COLOR
COLOR RESET
Sets and stores the hue and saturation for six colors(RED/ GREEN/BLUE/
CYAN/MAGENTA/YELLOW) to satisfy the color requirements of a user. HUE Adjusts the screen hue.
SATURATION
Adjusts the color sharpness on the screen. Lower values make
the color sharpness weaker and colors lighter while higher
values make the color sharpness stronger and colors dark.
Resets the color settings to the factory default settings for the current input
device. 16
CUSTOMIZING SETTINGS
DISPLAY
ENGLISH
ENG
1 Press MENU button on the bottom of the Monitor set
to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more
option settings.
3 Select DISPLAY by pressing the ► button.
4 Enter to DISPLAY by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► or ▼
buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
MENU > NEXT MENU > DISPLAY
Description
HORIZONTAL
To move image left and right.
VERTICAL
To move image up and down.
CLOCK
To minimize any vertical bars or stripes visible on the screen background.The
horizontal screen size will also change.
PHASE
To adjust the focus of the display. This item allows you to remove any horizontal
noise and clear or sharpen the image of characters.
VOLUME
1 Press MENU button on the bottom of the Monitor set
to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more
option settings.
3 Select VOLUME by pressing the ► button.
4 Enter to VOLUME by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
MENU > NEXT MENU > VOLUME
VOLUME Description
To adjust the volume of headphone/earphone.(Only for HDMI input)
CUSTOMIZING SETTINGS
17
OTHERS
ENG
ENGLISH
1 Press MENU button on the bottom of the Monitor set
to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more
option settings.
3 Select OTHERS by pressing the ► button.
4 Enter to OTHERS by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► or ▼
buttons.
6 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
MENU > NEXT MENU > OTHERS
Description
LANGUAGE
To choose the language in which the control names are displayed.
POWER
INDICATOR
Use this function to set the power indicator on the bottom side of the monitor to
ON or OFF.If you set OFF, it will go off.
If you set ON at any time, the power indicator will automatically be turned on.
AUTOMATIC STANDBY
If you do not press any button on the monitor set for a certain period, the monitor
set will automatically switch to standby mode.
BUTTON SOUND
To select or turn off the Buzzer sound.
The Buzzer sound operates in below cases.
DC power On/Off
MENU OSD On
FUNC. OSD On
MY KEY OSD On
AUTO
INPUT
18
CUSTOMIZING SETTINGS
MY KEY Setting
ENGLISH
ENG
1 Press MY KEY button on the bottom of the Monitor
set to display the MY KEY OSD. 2 Set the options by pressing the ◄or►or▼buttons.
3 Select EXIT to leave the OSD menu.
Each option is explained below.
MY KEY
MY KEY SETTING
Description
MY KEY is short key. You can select one of FUNC. (SUPER ENERGY SAVING,
DUAL DISPLAY, DUAL WEB, TRUE COLOR FINDER) as your favorite feature.
CUSTOMIZING SETTINGS
19
FUNC. Setting
ENG
ENGLISH
SUPER ENERGY SAVING
1 Press FUNC. button onthe bottom of the Monitor set to
display the FUNC. OSD.
2 Enter to SUPER ENERGY SAVING by pressing the ▼
button.
3 Set the options by pressing the ◄ or ► or ▼buttons.
4 Select EXIT toleave the OSD menu.To return to the
upper menu or set other menu items, usethe up arrow
(
) button.
Each option is explained below.
SUPER ENERGY SAVING
Description
ON
Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function
OFF
Disables SUPER ENERGY SAVING.
RESET
Resets the values of total energy consumption reduction and CO2 emission reduction
estimates.
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
yy
TOTAL
CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
yy
SAVING
DATA(W/h)
yy
SUPER SAVING
584 mm
(23 inch)
686 mm
(27 inch)
7 W/h
9 W/h
Saving Data depends on the Panel. So,those values should be different from each panel and panel
yy
vendor.
LG calculated these values by using “broadcast video signal”
yy
(including broadcast video: IEC 62087)
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
yy
function.
20
CUSTOMIZING SETTINGS
* Before using below functions, please install DUAL PACKAGE programme.
ENGLISH
ENG
DUAL DISPLAY
1 Press FUNC. button onthe bottom of the Monitor set
to display the FUNC. OSD.
2 Select DUAL DISPLAY by pressing the ► button.
3 Enter to DUAL DISPLAY by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► buttons.
5 Select EXIT toleave the OSD menu.To return to the
upper menu or set other menu items, usethe up
arrow (
) button.
Each option is explained below.
DUAL DISPLAY
Description
CLONE
By selecting CLONE,user can use secondary monitor as done mode of primary
monitor.
EXTENDED
By selecting EXTENDED,user can use secondary monitor as extended mode of
primary monitor.
OFF
If select OFF,DUAL DISPLAY is off.
* Before using below functions, please install DUAL PACKAGE programme.
DUAL WEB
1 Press FUNC. button onthe bottom of the Monitor set
to display the FUNC. OSD.
2 Select DUAL WEB by pressing the ► button.
3 Enter to DUAL WEB by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► buttons.
5 Select EXIT toleave the OSD menu.To return to the
upper menu or set other menu items, usethe up
arrow (
) button.
Each option is explained below.
DUAL WEB
Description
ON
Help user to browse web efficiently by dividing in half. Help to arrange and move
windowson screen. Help user to control dividedwindows ratio.
OFF
If select OFF,DUAL WEB is off.
NOTE
When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD
yy
appear and user should press dual button -> User can bring back to normal mode.
CUSTOMIZING SETTINGS
21
TRUE COLOR FINDER
ENG
ENGLISH
1 Press FUNC. button onthe bottom of the Monitor set
to display the FUNC. OSD.
2 Select TRUE COLOR FINDER by pressing the ►
button.
3 Enter to TRUE COLOR FINDER by pressing the ▼
button.
4 Set the options by pressing the ◄ or ► buttons.
5 Select EXIT toleave the OSD menu.To return to the
upper menu or set other menu items, usethe up
arrow ( ) button.
Each option is explained below.
TRUE COLOR FINDER
Description
ON
It enable the calibration result that applied to the monitor by the True Color Finder.
OFF
If it set to OFF, the monitor gets back to the picture quality set before.
NOTE
Please buy a supported calibrator to use the True Color Finder function. Then install the True Color
yy
Finder Software provided with the product to calibrate the monitor.
Please refer to the help manual of the True Color Finder to find supported calibrators and graphic
yy
cards.
When the input port is changed, it is desirable to calibrate the monitor again.
yy
MY KEY SETTING
1 Press FUNC. button onthe bottom of the Monitor
set to display the FUNC. OSD.
2 Select MY KEY SETTING by pressing the ► button.
3 Enter to MY KEY SETTING by pressing the ▼
button.
4 Set the options by pressing the ◄ or ► buttons.
5 Select EXIT toleave the OSD menu.To return to
the upper menu or set other menu items, use
the up arrow (
) button.
Each option is explained below.
MY KEY SETTING
Description
SUPER ENERGY SAVING
Enables SUPER ENERGY SAVING you can save energy with this energy-effcient
function.
DUAL DISPLAY
User can use CLONE or EXTENDED in another monitor.
DUAL WEB
Help user to browse web efficiently by dividing in half and some other convenience in
browsing dual pages.
TRUE COLOR FINDER
User can enable calibration result of the True Color Finder.
22
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
Check the following before calling for service.
No image appears
Is the power cord of the display
connected?
yy Check and see if the power cord is connected properly to the power
outlet.
Is the power indicator light on?
yy Press the Power button.
yy Adjust the brightness and the contrast.
Is the power on and the power
indicator Red?
Is the power indicator flickering?
yy If the display is in power saving mode, try moving the mouse or
pressing any key on the keyboard to bring up the screen.
yy Try to turn on the PC.
Do you see an "OUT OF RANGE"
message on the screen?
yy This message appears when the signal from the PC (video card) is
out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display
again.
Do you see a "NO SIGNAL"
message on the screen?
yy When the monitor is on "No-Signal" in 5 minutes, the monitor goes to
DPM mode.
No image appears with mobile phone
Does the mobile phone support
MHL?
yy Check and see if the mobile phone support MHL.
yy Try to update software of the mobile phone to the latest version.
Is the MHL cable connected?
yy Check and see if the MHL cable is connected properly to the mobile
phone and HDMI2/MHL port.
Do you see a "OSD LOCKED" message on the screen?
Do you see “OSD LOCKED” when
you push MENU button?
yy You can secure the current control settings, so that they cannot be
inadvertently changed. You can unlock the OSD controls at any time
by pushing the MENU button for several seconds: the message “OSD
UNLOCKED” will appear.
Display image is incorrect
Display Position is incorrect.
yy Press the AUTO button to automatically adjust your display image to
the ideal setting.
On the screen background, vertical
bars or stripes are visible.
yy Press the AUTO button to automatically adjust your display image to
the ideal setting.
Any horizontal noise appearing in
any image or characters are not
clearly portrayed.
yy Press the AUTO button to automatically adjust your display image to
the ideal setting.
yy Check Control Panel ► Display ► Settings and adjust the display
to the recommended resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits (true color).
TROUBLESHOOTING
23
CAUTION
Display image is incorrect
The screen color is mono or
abnormal.
yy Check if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
yy Make sure the video card is properly inserted in the slot.
yy Set the color setting higher than 24 bits (true color) at Control Panel
► Settings.
The screen blinks.
yy Check if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
yy Be sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended
resolution?
yy If the selected resolution is HDMI 1080i 60/50 Hz, the screen may
be flickering. Change the resolution to the recommended resolution
1080P.
ENG
ENGLISH
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
yy
changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
yy
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
yy
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
24
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
IPS237L
Display
Screen Type
58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating
Visible diagonal size: 58.4 cm
Sync Input
Pixel Pitch
Horizontal Frequency
Vertical Frequency
0.265 mm x 0.265 mm (Pixel Pitch)
30 kHz to 83 kHz (Automatic)
56Hz to 75Hz (D-SUB)
56Hz to 61Hz(HDMI)
Separate Sync. HDMI
15 pin D-SUB Connector / HDMI Connector
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
D-SUB(Analog) : 1920 x 1080 @ 60 Hz
HDMI (Digital) : 1920 x 1080 @ 60 Hz
VESA 1920 x 1080 @ 60 Hz
Video Input
Resolution
Plug & Play
Power
Consumption
Power Input
AC-DC Adapter
Dimensions
(Width x Height x
Depth)
Weight
Input Form
Signal Input
Input Form
Max
Recommend
DDC 2B(Analog,HDMI)
On Mode : 29 W(Typ.)
Sleep Mode ≤ 0.5 W
Off Mode ≤ 0.5 W
1.6 A
19 V
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
1.7 A
OUTPUT: 19 V
With Stand
53.3 cm x 39.8 cm x 15.4 cm
Without Stand
53.3 cm x 32.1 cm x 3.4 cm
3.5 kg
Tilt Range
-5° to 20°
Environmental
conditions
Operating Temperature 10°C to 35 °C
Operating Humidity
10 % to 80 %
Storage Temperature
Storage Humidity
Stand Base
Power cord
-20°C to 60 °C
5 % to 90 % non-Condensing
Attached ( ), Detached (O)
Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
25
ENG
ENGLISH
SPECIFICATIONS
IPS277L
Display
Screen Type
68.6 cm (27 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating
Visible diagonal size: 68.6 cm
Sync Input
Pixel Pitch
Horizontal Frequency
Vertical Frequency
0.3114 mm x 0.3114 mm (Pixel Pitch)
30 kHz to 83 kHz (Automatic)
56Hz to 75Hz (D-SUB)
56Hz to 61Hz(HDMI)
Separate Sync. HDMI
15 pin D-SUB Connector / HDMI Connector
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
D-SUB(Analog) : 1920 x 1080 @ 60 Hz
HDMI (Digital) : 1920 x 1080 @ 60 Hz
VESA 1920 x 1080 @ 60 Hz
Video Input
Resolution
Plug & Play
Power
Consumption
Power Input
AC-DC Adapter
Dimensions
(Width x Height x
Depth)
Weight
Input Form
Signal Input
Input Form
Max
Recommend
DDC 2B(Analog,HDMI)
On Mode : 31 W(Typ.)
Sleep Mode ≤ 0.5 W
Off Mode ≤ 0.5 W
1.6 A
19 V
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
1.7 A
OUTPUT: 19 V
With Stand
62.3 cm x 44.9 cm x 16.9 cm
Without Stand
62.3 cm x 37.3 cm x 3.5 cm
5.2 kg
Tilt Range
-5° to 20°
Environmental
conditions
Operating Temperature 10°C to 35 °C
Operating Humidity
10 % to 80 %
Storage Temperature
Storage Humidity
Stand Base
Power cord
-20°C to 60 °C
5 % to 90 % non-Condensing
Attached ( ), Detached (O)
Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
26
SPECIFICATIONS
Preset Modes (Resolution)
ENGLISH
ENG
IPS237L/IPS277L
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70
-/+
640 x 480
31.469
60
-/-
640 x 480
37.500
75
-/-
800 x 600
37.879
60
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.023
75
+/+
1152 x 864
67.500
75
+/+
1280 x 1024
63.981
60
+/+
1280 x 1024
79.976
75
+/+
1680 x 1050
65.290
60
-/+
1920 x 1080
67.500
60
+/+
Recommend Mode
HDMI/MHL TIMING
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
HDMI
MHL
480P
31.50
60
O
O
576P
31.25
50
O
O
720P
37.50
50
O
O
720P
45.00
60
O
O
1080i
28.12
50
O
O
1080i
33.75
60
O
O
1080P
33.75
30
X
O
1080P
56.25
50
O
X
1080P
67.50
60
Recommend Mode
X
Indicator
Mode
LED Color
On Mode
Red
Sleep Mode
Blinking Red
Off Mode
Off
Proper posture
27
ENG
ENGLISH
Proper posture
Proper posture for using the Monitor set.
Adjust the
Monitor set and
your posture to
allow you to view
images at the
optimal viewing
angle.
Place your hands
gently on the
keyboard, keeping
your arms bent at
the elbows and
horizontally outright.
Adjust the location of the
Monitor set to avoid it
reflecting light.
Make sure to read the Safety Precautions before
using the product.
Keep the Owner’s Manual (CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE
U. S. A.,Inc. has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
Download PDF