LG | L1510BF | LG L1510BF Owner’s Manual

User’s Guide
L1510BF
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the pro duct screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
A1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A2
Connecting the Display
Before setting up the product, please make sure the power to the product,
PC, and other attached devices is turned off.
Positioning your display
1. Remove the tape.
<Image 2>
<Image 1>
Put the set as the
picture below
<Image 1> to
remove the tape.
Do not remove the tape
with the set up side
down as the <Image 2>
The base part may
spring up to injure your
hand.
2. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -24˚~145˚
145˚
-24˚
Height Range : maximun 3.39inch (86.1mm)
Landscape & Portrait : You can rotate the panel 90o clockwise.
(* For detailed information, please refer to the Pivot Sofeware CD provided.)
* Make sure not to
touch the floor
when the head
rotates to use the
Pivot function.
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the product should not exceed 5 degrees.
A3
Connecting the Display
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2. Connect the power cord into a proper power outlet that is easily accessible and
close to the display.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Power Cord
Signal Cable
Analog signal
D-sub
* Varies according to model.
*
Wall-outlet type
2
1
Mac adapter
PC
For Apple Macintosh use, a separate
plug adapter is needed to change the
15 pin high density (3 row) D-sub
VGA connector on thesupplied cable
to a 15 pin 2 row connector.
MAC
3. Press
button on the front switch panel to turn the
power on. When product power is turned on, the 'Self
Image Setting Function' is executed automatically.
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When
the user connects the monitor for the first time, this function automatically adjusts the display to
optimal settings for individual input signals.
‘AUTO/SELECT’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO/SELECT function button to improve resolution.
A4
Connecting the Display
To Use Touch Screen
Select and Install the driver CD provided.
ITM driver
Make sure you have
the driver installation
CD bundled with the
product!
<Connecting the USB cable for touch screen>
1) Insert the driver installation CD for the ITM
touch screen.
2) See the touch screen software installation
CD for more information and assistance.
3) Connect the USB cable for the touch
screen after the driver installation.
* The software drivers support the following
Microsoft Windows operating systems:
Windows 95, 98, ME, 2000, XP and NT 4.0.
* Your purchased product
and its accessories may
look different from the items
illustrated in this manual.
Hantouch driver
1) Connect the USB cable for touch screen before installing the driver.
2) Insert the Hantouch touch screen driver installation CD.
3) Open the "My Computer -> LG Driver -> Drivers" folder, then select the
driver appropriate for your OS.
4) For more information, see the installation manual in the touch screen
software installation CD bundled with the product.
* The software drivers support the following Microsoft Windows operating
systems: Windows 95, 98, ME, 2000, XP and NT 4.0.
For more information about installation for other OS, see the driver
installation CD.
* Do not select "install PS/2 interface
driver" while installing the touch screen
driver for the Hantouch.
A5
Control Panel Functions
Front Panel Controls
LightView
Control
Function
Power Button
Use this button to turn the display on or off.
Power Indicator
This Indicator lights up green when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving) mode, this indicator color
changes to amber.
MENU Button
Use this button to enter or exit the On Screen
Display.
Buttons
AUTO/SELECT
Button
Use these buttons to choose or adjust items in
the On Screen Display.
Use this button to enter a selection in the On Screen
Display.
A6
Control Panel Functions
Control
Direct Access Function
OSD LOCKED/UNLOCKED
This function allows you to secure the current control settings,
so that they cannot be inadvertently changed. Press and hold
the MENU button for several seconds: the message
“OSD LOCKED” appears.
You can unlock the OSD controls at any time by pushing the
MENU button for several seconds:
the message “OSD UNLOCKED” will appear.
DAY
NIGHT
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
• DAY : Bright ambient illumination
• NIGHT : Dark ambient illumination
• TEXT : For text images (Word processing etc.)
• MOVIE : For animation images in videos
or movies
• PHOTO : For pictures or drawings
• NORMAL : This is under normal operating
conditions
PICTURE
Bring up Contrast and Brightness adjustment.
:
MENU
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press the
AUTO/SELECT button before entering the On Screen
Display(OSD). This will automatically adjust your display
image to the ideal settings for the current screen resolution
size (display mode).
The best display mode is 1024x768.
A7
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
MENU
AUTO/SELECT
MENU
MENU
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, press the AUTO/ SELECT Button.
Use the
Buttons to adjust the item to the desired level.
Accept the changes by pressing the MENU Button.
Exit the OSD by pressing the MENU Button.
A8
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu
PICTURE
Sub menu
Reference
To adjust the brightness, contrast
and gamma of the screen
BRIGHTNESS
CONTRAST
GAMMA
COLOR
To customize the color of the
screen
PRESET 6500K
9300K
RED
GREEN
BLUE
POSITION
HORIZONTAL
To adjust the position of the
screen
VERTICAL
TRACKING CLOCK
PHASE
SETUP
To improve the clarity and
stability of the screen
LANGUAGE
OSD
To customize the screen status
for a user's operating environment
HORIZONTAL
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
: Adjustable
NOTE
The order of icons may differ depending on the model (A9~A11).
A9
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
NOTE
OSD (On Screen Display) menu languages on the product may differ from the manual.
To adjust the brightness and contrast of the screen
OSD Adjust
Description
BRIGHTNESS
To adjust the brightness of the screen.
PICTURE
CONTRAST
To adjust the contrast of the screen.
GAMMA
Set your own gamma value. (-50~50)
On the product, high gamma values
display whitish images and low gamma
values display high contrast images.
MENU
To customize the color of the screen
OSD Adjust
Description
PRESET 6500K/9300K
Select the screen color.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
COLOR
MENU
RED
GREEN
BLUE
Set your own color levels.
To adjust the position of the screen
OSD Adjust
Description
POSITION
Horizontal Position
To move image left and right.
Vertical Position
To move image up and down.
MENU
A10
On Screen Display(OSD) Selection and Adjustment
To improve the clarity and stability of the screen
OSD Adjust
Description
TRACKING
CLOCK
To minimize any vertical bars or
stripes visible on the screen
background.The horizontal screen
size will also change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU
To customize the screen status for a user's operating environment
OSD Adjust
Description
LANGUAGE
SETUP
To choose the language in which the
control names are displayed.
OSD POSITION To adjust position of the OSD window
on the screen.
MENU
SETUP
MENU
If the output of the video card is different
WHITE
the required specifications, the color
BALANCE
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
Use this function to set the power
POWER
INDICATOR indicator on the front side of the product
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
FACTORY Restore all factory default settings except
"LANGUAGE."
RESET
Press the
button to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
only when the input signal is an analog signal.
A11
Troubleshooting
Check the following before calling for service.
No image appears
Is the power cord of the
display connected?
Check and see if the power cord is connected
properly to the power outlet.
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator green?
Adjust the brightness and the contrast.
Is the power indicator
amber?
If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard
to bring up the screen.
Make sure if the power is on.
Try to turn on the PC.
Do you see an "OUT
OF RANGE" message
on the screen?
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this U
Guide and
configure your display again.
Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
Do you see “OSD
LOCKED” when you
push MENU button?
You can secure the current control settings,
so that they cannot be inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENU button for
several seconds: the message
“OSD UNLOCKED” will appear.
A12
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
Press the AUTO/SELECT button to
automatically adjust your display image to the
ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the screen
background, vertical
bars or stripes are
visible.
Press the AUTO/SELECT button to utomatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
Press the AUTO/SELECT button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
The screen color is
mono or abnormal.
Check if the signal cable is not damaged
(missing or crooked pins) and is connected
tightly to your PC interface.
Make sure the video card is properly inserted in
the slot.
Set the color setting higher than 24 bits (true
color) at Control Panel - Settings.
The screen blinks.
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
A13
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
Be sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
Please check if the video card in your PC
supports Plug&Play function.
USB function
USB function cannot be
setup.
Check if the USB cable is correctly connected.
Check if the PC and OS are USB compliant.
For verification of USB support, consult the
manufacturer of each system.
A14
Specifications
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
(with tilt stand)
Tilt Range
Power Input
Environmental
Conditions
Tilt Stand
Power cord
15 inches (38.016cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 38.016cm
0.297 mm pixel pitch
Horizontal Freq. 30 - 63kHz (Automatic)
Vertical Freq.
56 - 75Hz (Automatic)
Input Form
Separate Sync, Positive/Negative
Signal Input
15 pin D-Sub Connector
Input Form
RGB Analog (0.7Vp-p/75ohm)
Max
VESA 1024 x 768@75Hz
Recommend
VESA 1024 x 768@60Hz
DDC 2B
23W
On Mode
:
Sleep Mode
≤
1W
Off Mode
≤
1W
Full Up Position
Folded Position
Width
35.60 cm / 14.02 inches
35.60 cm / 14.02 inches
Height 38.00 cm / 14.96 inches
10.33 cm / 4.07 inches
Depth
22.90 cm / 9.02 inches
29.14 cm / 11.47 inches
Net
5.1 kg (11.24 lbs)
Tilt Range
-24˚~145˚ (Head)
Height Range
3.39inch (86.1mm)
Rotate
90˚ clockwise
AC 100-240V~ 50/60Hz 0.6A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Attached( O ), Detached ( )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.
A15
Specifications
Preset Modes (Resolution)
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
*12
13
14
VGA
VGA
VGA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
Horizontal Freq. (kHz)
31.468
31.468
31.469
35.000
37.861
37.500
35.156
37.879
48.077
46.875
49.725
48.363
56.476
60.023
640 x 350
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
Vertical Freq. (Hz)
70
70
60
66.67
72.8
75
56.25
60
72
75
75
60
70
75
*Recommend Mode
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
green
amber
off
A16
Specifications
VESA wall mounting
Connect the monitor to the VESA
compliant stand (wall-mount type or
stand alone type).
For further information, on mounting to
different stands, call our service center
or monut manufacturer.
Kensington Security Slot- optional
A security cable can be purchased
and is available at many popular
electronic retail stores.
A17
Making use of USB (Universal Serial Bus) - Optional
USB (Universal Serial Bus) is an innovation in connecting your different
desktop peripherals conveniently to your computer. By using the USB, you will
be able to connect your mouse, keyboard, and other peripherals to your display
instead of having to connect them to your computer. This will give you greater
flexibility in setting up your system. USB allows you to connect a chain of up to
120 devices on a single USB port; and you can “hot” plug (attach them while
the computer is running) or unplug them while maintaining the Plug and the
Plug auto detection and configuration. This display has an integrated BUSpowered USB hub, allowing up to 2 other USB devices to be attached it.
USB connection
1.
2.
Connect the upstream port of the display to the downstream port of the USB
compliant PC or another hub using the USB cable. (Computer must have a
USB port)
Connect the USB compliant peripherals to the downstream ports of the
display.
This is a simplified representation
of rear view.
USB upstream Port
To USB downstream port of
the USB compliant PC or
another hub cable
USB downstream Port
connect the cables from USB
compliant peripherals-such as
keyboard, mouse, etc
NOTE
To activate the USB hub function, the display must be connected to a USB compliant PC(OS)
or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the shape of the connector at the cable side
matches the shape at the connecting side.
Even if the display is in a power saving mode, USB compliant devices will function when they
are connected the USB ports(both the upstream and downstream) of the display.
A18
Making use of USB (Universal Serial Bus) - Optional
USB Specifications
USB standard
Downstream power supply
Communication speed
USB port
Rev. 1.1 complied BUS-powered hub
100mA for each (MAX)
12 Mbps (full), 1.5 Mbps (low)
1 Upstream port
2 Downstream ports
IMPORTANT: These USB connectors are not designed for use with high-power USB devices
such as a video camera, scanner, etc. LGE recommends connecting high-power USB devices
directly to the computer
A19
Digitally yours
Download PDF