LG | L1510M | LG L1510M Owner’s Manual

User's Guide
L1510M
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the back cover and quote this information to your
require service.
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety, however improper use may result in potential e shock or fire hazards.
In order to allow the proper operation of all safeguards incorporated in this
display, observe the following basic rules for its installation, use, and
servicing.
On
Safety
power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
Use
only the
manufacturer
or
the nearest authorized
repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
There
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
are no user
To Avoid Personal
Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
A1
On Installation
Do not allow
the
anything
display where the
Do not
use
this
to rest upon or roll over the power
power cord is
display
sink, laundry tub, in
near water
a wet
cord, and do
not
place
subject to damage.
such
basement,
as near a
or near a
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
can cause
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub
mar,
strike the Active Matrix LCD with
anything hard
or damage the Active Matrix LCD permanently.
or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
Connecting
Before
the
Display
setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Connecting
the stand base
1. Align the hooks on the stand
base with the
matching slots
in the base of
the monitor.
2.
Insert the hooks into slots.
Hook
Important
This illustration
general model
shown in the picture.
depicts
differ from the items
the
Once you connect the stand
Do not carry the product
product may fall and get
base, try
of connection. Your monitor may
not to disconnect it.
upside down holding only the
damaged or injure your foot.
Stand Base
A3
stand base. The
Connecting
the
Display
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2. Connect the power cord into a proper power outlet that is easily accessible and
close to the
display.
NOTE
This is
This
simplified representation of the rear view.
rear view represents a general model; your display may differ from the view as shown.
a
Power Cord
Signal Cable
Analog signal
D-sub*
*
Varies according to model.
Wall-outlet
type*
2
Adaptor
Mac
1
Untuk penggunaan
PC-outlet
pada
Apple Macintosh, adaptor
steker terpisah dibutuhkan
untuk mengubah konektor
15 pin high density (3 row)
D-sub VGA pada kabel
yang disediakan menjadi
konektor 15 pin 2 row.
type*
PC
MAC
3.
Press
power
Image
button
on
the front switch
panel
to turn the
When monitor power is turned on, the 'Self
Setting Function' is executed automatically.
on.
NOTE
'
Self
provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for
individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once
again, push the 'AUTO' button on the front panel of the monitor. Otherwise, you may execute the Factory reset'
option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except
'Language'.
Image Setting
Function'? This function
'
A4
Connecting
the
Display
Side Jacks
*Line Out
AUDIO
IN
Speaker Out
Jack of the PC sound card
Display
Headphone/Earphone Input
Automatically mutes the speaker
Audio
volume when the
headphones
are
plugged
in.
Input
Connects to the *LINE OUT
of the PC sound card.
jack
*LINE OUT
A terminal used to connect to the
speaker including a
built-in
amplifier (Amp). Make sure that the
before connecting. If the Audio Out of PC
connecting terminal of the PC sound card is checked
sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card
Out
using the card jumper of the
supports both Speaker Out and Line Out,
program
(Refer to the
A5
Sound Card
Manual).
convert to Line
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the
Power
This Indicator
(DPMS)
display
on or
off.
Indicator
lights up green when the display
operates normally. If the display is in DPM (Energy
Saving) mode, this indicator color changes to amber.
MENU Button
Use this button to enter
or
exit the On Screen
Display.
Buttons
Use these buttons to choose
the On Screen
adjust
items in
Display.
AUTO/SELECT
Use this button to enter
Button
Display.
A6
or
a
selection in the On Screen
Control Panel Functions
Control
Direct Access Function
VOLUME:
100
Use these buttons to decrease
or
increase the volume level.
100
up Contrast and
Bring
Brightness adjustment.
AUTO IMAGE ADJUSTMENT
When
your display settings, always press the
AUTO/SELECT button before entering the On Screen
adjusting
Display(OSD). This will automatically adjust your display
image to the ideal settings for the current screen
resolution size (display mode).
The best
display
mode is 1024x768.
LIGHT VIEW:
This feature lets you easily select the best desired image
condition optimized to the environment (ambient illumination,
image types etc.).
?
DAY
?
NIGHT
:
?
TEXT
For text
?
?
?
:
Bright
ambient illumination
Dark ambient illumination
images (Word processing etc.)
MOVIE : For animation images in videos or movies
PHOTO : For pictures or drawings
USER MODE : For use under user setup image
conditions (Brightness, contrast and color tint are
selected by the user in OSD Screen Setup Menu.)
:
MUTE:
Used to select mute on
off (means sound on).
(means
sound
off)
and mute
CONTROLS LOCKED/UNLOCKED
:
MENU and
This function allows you to secure the current control settings,
so that they cannot be inadvertently changed. Press and hold
the MENU button and
button for 3 seconds: the message
"CONTROLS LOCKED" appears.
You
unlock the OSD controls at any time
MENU button and
button for 3 seconds:
can
by pushing
the message "CONTROLS UNLOCKED" will appear.
A7
the
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
MENU
Display, follow these steps:
AUTO/SELECT
AUTO/SELECT
MENU
Press the MENU Button, then the main
To
access a
becomes
making image adjustments.
control,
highlighted,
Use the
of the OSD appears.
Buttons. When the icon you want
press the AUTO/SELECT Button.
use
the
menu
or
Buttons to
adjust the item
to the desired level.
Accept the changes by pressing the AUTO/SELECT Button.
Exit the OSD
by Pressing the MENU Button.
A8
On Screen
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
and setting menus.
The
Main
menu
BRIGHTNESS
Sub
Reference
menu
BRIGHTNESS
CONTRAST
CONTRAST
COLOR
PRESET
To
adjust the brightness
contrast of the
9300K
and
screen
To customize the color of the
6500K
screen
R/G/B(User Color)
POSITION
TRACKING
AUDIO
V POSITION
To
H POSITION
screen
CLOCK
To
adjust the position
of the
PHASE
improve the clarity and
stability of the screen
VOLUME
To
adjust the audio
function
TREBLE
BASS
BALANCE
SETUP
LANGUAGE
To customize the
OSD POSITION
for
a
user's
screen
operating
FACTORY RESET
WHITE BALANCE
:
Adjustable
NOTE
The order of icons may differ
depending
on
A9
the model
(A9~A11).
status
environment
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
NOTE
OSD (On Screen
To
Display)
menu
languages
adjust the brightness and
OSD
on
the monitor may differ from the manual.
contrast of the
Adjust
screen
Description
BRIGHTNESS / CONTRAST
BRIGHTNESS
To
88
adjust the brightness
of the
screen.
100
CONTRAST
To
To customize the color of the
OSD
adjust the
Description
PRESET
9300K/6500K
Select the
9300K
screen.
screen
Adjust
COLOR
PRESET
contrast of the
6500K
?
9300K:
?
6500K:
RED
GREEN
color.
screen
Slightly
Slightly
bluish white.
reddish white.
BLUE
RED
GREEN
Set your
own
color levels.
BLUE
To
adjust the position of the
OSD
screen
Adjust
Description
POSITION
Vertical Position
To
61
39
move
image
up and down.
Horizontal Position
To
A10
move
image
left and
right.
On Screen
To
Selection and
Display(OSD)
improve
OSD
the
clarity
and
stability
Adjust
of the
screen
Description
CLOCK
PHASE
To
Adjustment
To minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
To adjust the focus of the display. This
item allows you to remove any horizontal
noise and clear or sharpen the image of
characters.
adjust the audio function
OSD
Adjust
To customize the
OSD
screen
Description
VOLUME
To decrease
or
TREBLE
To raises
or
lowers Treble level.
BASS
To raises
or
lowers Bass level.
BALANCE
To
status for
a
adjust the
user's
Adjust
increase volume level.
balance level.
operating environment
Description
LANGUAGE To choose the
control names
language in which
are displayed.
the
OSD POSITION To adjust position of the OSD window
the screen.
FACTORY
Return to all
RESET
"LANGUAGE".
factory
default
on
settings except
If you don't want to reset the monitor, use
the
button to select NO and then
press the AUTO/SELECT button.
WHITE
If the
output of the video card is different the
BALANCE
the color level may
deteriorate due to video signal distortion.
Using this function, the signal level is adjusted
to fit into the standard output level of the video
card in order to provide the optimal image.
Activate this function when white and black
colors are present in the screen.
required specifications,
For
example
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
when the input signal is an analog signal.
A11
only
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator green?
Adjust the brightness
Is the power indicator
amber?
If the
properly
the
if the power cord is connected
to the power outlet.
see
is in power
saving mode, try moving
or pressing any key on the keyboard
display
mouse
and the contrast.
up the screen.
Make sure if the power is
to
bring
Try to
turn
on
on.
the PC.
Do you see an "INPUT
SIGNAL OUT OF
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message
the screen?
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
on
Doyouseea"NO
SIGNAL "message on
This message appears when the signal cable
between your PC and your display is not
the screen?
connected. Check the
Do you
see a
"CONTROLS LOCKED" message
Do you see
"CONTROLS LOCKED"
when you
button?
signal
push
MENU
You
can secure
on
try again.
the screen?
the current control
settings,
inadvertently
they cannot be
changed. You can unlock the OSD controls
at any time by pushing the MENU button
so
that
cable and
and
button for 3 seconds: the message
"CONTROLS UNLOCKED" will appear.
A12
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO/SELECT button to
automatically adjust your display image to the
ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the AUTO/SELECT button to
automatically adjust your display image to the
ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Press the AUTO/SELECT button to
automatically adjust your display image to the
ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
and
signal cable
is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
use a
the slot.
Set the color
setting higher than 24
color) at Control Panel Settings.
bits
(true
-
The
screen
blinks.
Check if the
screen
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be
A13
higher than AC100-240V 50/60Hz.
Troubleshooting
Have you installed the
Have you installed the
display driver?
Do you
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
driver?
display
Be
sure
to install the
display driver from the
(or diskette) that comes with
display driver CD
your display. Or, you
can
driver from
our
Make
to check if the video card
sure
web site:
also download the
http://www.lge.com.
supports
Plug&Play function.
monitor found"
message?
Audio function
No sound.
Check if the audio cable is
correctly connected.
Check the volume level.
Sound is too
high
pitched or too
piched.
low
Sound level is too low.
Adjust the TREBLE to an appropriate level.
Adjust the BASS to an appropriate level.
Check the volume level.
A14
Specifications
Display
15 inches (38.1cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
15 inches viewable
0.3 mm pixel pitch
Sync Input
Video
Input
Resolution
Horizontal
Freq.
Vertical Freq.
Input Form
30
Signal Input
Input Form
pin D-Sub Connector
RGB Analog (0.7Vp-p/75ohm)
Max
VESA 1024
VESA 1024
-
63kHz (Automatic)
75Hz (Automatic)
Separate TTL, Positive/Negative
15
Recommend
Plug&Play
56
-
x
x
768@75Hz
768@60Hz
DDC 2B
RMS Audio
Output 1W+1W(R+L)
0.7Vrms
Input Sensitivity
Speaker Impedance 4Ω
Audio
28W
Power
Normal
:
Consumption
Stand-by/Suspend
≤
DPMS Off
≤3W
Dimensions
Width
36.02
&Weight
(with tilt stand)
Height
Depth
Tilt
3W
Net
/ 14.18 inches
35.98 cm / 14.17 inches
15.30 cm / 6.02 inches
4.15 kg (9.15 lbs)
Tilt
-5˚~30˚
cm
Range
Power Input
AC 100-240V~50/60Hz 0.6A
Environmental
Conditions
Operating Conditions
Temperature 10˚C
to 35 ˚C
10 % to 80 % non-Condensing
Conditions
Humidity
Storage
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Tilt Stand
Signal
cable
Power cord
Attached(
), Detached ( O )
Attached(
), Detached ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A15
notice.
Preset Modes
(Resolution)
VGA
640
x
350
31.468
70
VGA
720
x
400
31.468
70
VGA
640
x
480
31.469
60
VESA
640
x
480
35.000
66.67
VESA
640
x
480
37.861
72.8
VESA
640
x
480
37.500
75
VESA
800
x
600
35.156
56.25
VESA
800
x
600
37.879
60
VESA
800
x
600
48.077
72
10
VESA
800
x
600
46.875
75
11
MAC
832
x
624
49.725
75
*12
VESA
1024
x
768
48.363
60
13
VESA
1024
x
768
56.476
70
14
VESA
1024
x
768
60.023
75
123456789
*
Recommended
Unlike CRT monitors, which require a high refresh rate to minimize flickering, TFT
technology is inherently flicker-free. If possible, configure your computer for 1024 x 768
addressability at 60Hz vertical
refresh rate.
Indicator
Normal
green
Stand-by/Suspend
amber
DPMS Off
amber
Specifications
VESA wall
mounting
Connected to another
object (stand
type and wall-mounted type. This
monitor accepts a VESA-compliant
mounting
interface
pad.- optional)
For further information, refer to the
VESA Wall Mounting Instruction Guide.
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased
separately at most
computer
stores
A17
Digitally yours
Download PDF

advertising