LG | L1780U | LG L1780U Owner’s Manual

User's Guide
L1780U
L1980U
L1780Q
L1980Q
L1781Q
L1981Q
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the back cover and quote this information to your
require service.
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the
cord, make
power cord supplied with the unit. In case you use another power
that it is certified by the applicable national standards if not being
sure
provided by the supplier. If the
manufacturer
or
power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
or listed on the display. If you are not sure what type of power supply
this manual
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the
Contact your dealer if the display is not operating properly.
power is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
A1
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
near water
a wet
such
basement,
as near a
or near a
place
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
or strike the Active Matrix LCD with anything hard
damage the Active Matrix LCD permanently.
Do not rub
mar, or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD
On
panel.
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
the
Connecting
Display
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
For the desktop monitor, install the computer with the stand unfolded,
for the rack wall mounting, install the computer with the stand folded.
Unfolding the stand
1.
2.
base
Place the monitor with its front
downward
facing
on a
cushion
or
soft cloth.
Remove the tape of stand base's hole, pull it towards the front side(in the
direction of the arrow) from the stand base using a coin or“- shape screwdriver.
“
*
Caution
:
To avoid any minor injury, be sure to pull the folding
stand base pressed by one hand, as shown below.
Make
sure
to
pull
stand base with
Otherwise, you
stopper with the
up the folding stopper while pressing down the
hand as shown in the below figure.
one
can
be
injured by the projected
stand base.
Hole
100
Coin,
"-"shape screwdriver
Folding Stopper
Folding the stand
base
1. To fix a stand, push the folding stopper inwards until you hear the“click” sound
coin or“the monitor.
using
a
“
shape screw driver,
while
100
pressing
down the stand base to
Coin,
"-"shape screwdriver
Folding Stopper
Important
This illustration
depicts the general
picture.
model of connection. Your monitor may differ from
the items shown in the
A3
Connecting
the
Display
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2. Connect the power cable with the AC adapter (AC power supply) ②, and
then
plug
the cable in the outlet.
③ (Voltage will
be
automatically controlled.)
When
connecting
to
wall concent
3
12
When
AC
adapter
connecting
to
PC
MAC
Mac adapter
For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
PC
A4
a
PC
a
Connecting
3. Touch
the
Display
button
on
the front switch
panel
to turn the power on. When
Setting Function' is
monitor power is turned on, the 'Self Image
executed automatically.(Only Analog Mode)
NOTE
'
Self Image Setting Function'? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically
adjusts the display to optimal settings for individual input signals. If you want to adjust the
monitor while in use, or wish to manually run this function once again, touch the
'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the
'FACTORY RESET' option on the OSD adjustment menu. However, be aware that this
option initializes all the menu items except 'LANGUAGE'.
A5
Using
the Auto Pivot, Auto Mirror function
This model
supports Auto Pivot (automatic rotation) and Auto Mirror
(automatic up/down reversal) functions.
To use this function, install the provided Forte Manager software first and then,
perform Automatic setting.(Manual is the default setting when you purchase the product.)
Refer to the installation guide included in the CD for more details on the installation method.
For the automatic setting, select Forte Manager -> Option -> Pivot -> Enable AutoPivot.
-
-
Notice
Manager software requires Microsoft Explorer 6.0 or later.
engaged, the direction of the OSD
(On Screen Display) menu will not be changed if rotated by 180°. (See the below figure.)
The response time (speed) for the Auto Pivot and Auto Mirror function can vary
depending on the video card and the PC performance, and these functions are not
supported in the DOS mode.
Forte
When the Auto Pivot or Auto Mirror function is
Auto Pivot
Screen rotation
:
You
can
rotate the monitor screen
※Caution : Be careful not to touch the
the
rear
button section when
.
rotating
screen.
Be careful that your hands
This
part clockwise by 180°
are
not
pressed down when rotating
the
screen.
view
represents a general model, your display may differ from the view as shown.
<Pushing the
screen
<Rotating clockwise>
<When rotated
by 90° >
<When rotated
by 180° >
part backwards>
Tilt the
screen
part while rotating
it
so
that the monitor
does not touch
the floor.
Refer to the next page about Auto Mirror function.
A6
Using
the Auto Pivot, Auto Mirror function
Auto Mirror
Screen switch : The monitor screen part is automatically mirrored when you switch it
forward/backward as shown in the figure.
※Caution : Be careful not to touch the
the
This
TipIf
a
rear
view
rotating
screen.
Be careful that your hands
the
button section when
are
not
pressed down when rotating
screen.
represents a general model, your display may differ from the view as shown.
you activate the Auto Pivot or Auto Mirror function while the
level, the screen display may not work properly.
screen
is almost on
In this case, set the screen up straight and adjust to the proper angle.
It is recommended that in order to maintain an ergonomic and comfortable
viewing position,
5 degrees.
the forward tilt
angle
of the monitor should not exceed
A7
Control Panel Functions
Front Panel Controls
<L1780U/L1980U/L1780Q/L1980Q>
MENU
(-)
(+)
ENGINE
SOURCE
AUTO/SET
<L1781Q/L1981Q>
Control
MENU Button
Function
Use this button to enter
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Touch and hold the MENU button for 5 seconds. The
message "OSD LOCKED" should appear.
You
can unlock the OSD controls at any time by touching
the MENU button for 5 seconds. The message "OSD
UNLOCKED" should appear.
A8
Control Panel Functions
Control
-+
-
Function
Buttons
Use these buttons to select
Screen
hot
Button
For
+
Button
or
adjust functions
key
information, refer
more
SOURCE hot
to page A15
key
Use this button to make Dsub
or
This feature is used when two
computers
to the
in the On
Display.
display.
The default
DVI connector active.
setting
AUTO/SET
Use this button to enter
Button
Display.
a
are
connected
is Dsub.
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always touch
the AUTO/SET button before entering the On
Display(OSD). This will automatically adjust
display image to the ideal settings for the
current screen resolution size (display mode).
Screen
your
The best
display
mode is
17 inch monitor
:
1280x1024
19 inch monitor
:
1280x1024
Power Button
Use this button to turn the
Power Indicator
This Indicator
lights
display
on or
up blue when the
off.
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
to amber.
A9
this indicator color
changes
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
-+
MENU
Display, follow these steps:
access a
becomes
control,
use
highlighted,
-+
AUTO/SET
Touch the MENU Button, then the main
To
the
making image adjustments.
menu
MENU
of the OSD appears.
-+
or
Buttons. When the icon you want
touch the AUTO/SET Button.
Use the -+
Buttons to adjust the image to the desired level. Use the
/
AUTO/SET Button to select other sub-menu items.
Touch the MENU Button
once to return to
the main
menu to
select another
function. Touch the MENU Button twice to exit from the OSD.
Automatic
save
With the OSD open,
you have made an adjustment the monitor
automatically
any adjustments you have made, even if you exit the menu
or open another menu. If you make an adjustment and then wait for the
OSD to disappear, the adjustment will also been saved.
once
save
A10
On Screen
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
and setting menus.
The
Main
Sub-menu
menu
PICTURE
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
PRESET
COLOR
6500K
To customize the color of
9300K
the
screen
RED
GREEN
BLUE
POSITION
TRACKING
SETUP
HORIZONTAL
To
VERTICAL
screen
CLOCK
To
adjust the position
of the
PHASE
improve the clarity
stability of the screen
LANGUAGE
To customize the
screen
status for a user's
operating
OSD
HORIZONTAL
and
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
MOVIE/TEXT
FLATRON
F-ENGINE(
-
)
To select
USER
desired
or
customize
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A11
the model (A11~A15).
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
Touch the MENU
Button, then the main menu of the OSD appears.
PICTURE
Menu Name
Sub-menus
Icons
Button
Tip
MENU
-+
:
SET
*
You
the
can use
the Forte
:
Enter
:
Select another sub-menu
Manager program when configuring or controlling
more details, refer to the manual included in the
For
display.
Manager Software CD.
screen
Forte
Exit
Adjust (Decrease/Increase)
:
NOTE
OSD (On Screen
Display)
menu
languages
on
A12
the monitor may differ from the manual.
On Screen
Selection and
Display(OSD)
Main
menu
Sub
Adjustment
Description
menu
PICTURE
PICTURE
of the
BRIGHTNESS
To
adjust the brightness
CONTRAST
To
adjust the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
screen.
contrast of the screen.
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
COLOR
COLOR
Select the screen color.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
PRESET
?
?
RED
Set your
own
red color levels.
GREEN
Set your
own
green color levels.
Set your
own
blue color levels.
HORIZONTAL
To
move
image left
VERTICAL
To
move
image
BLUE
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
POSITION
POSITION
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
A13
and
right.
up and down.
On Screen
Display(OSD)
Main
Selection and
Sub
menu
Adjustment
Description
menu
TRACKING
TRACKING
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
PHASE
To
adjust the focus of the display. This
item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
SETUP
LANGUAGE
To choose the
control
SETUP
OSD
POSITION
-
+
the
To
adjust position
on
the
of the OSD window
screen.
If the output of the video card is different
required specifications, the color
WHITE
BALANCE
MENU
language in which
displayed.
names are
the
level may deteriorate due to video
signal distortion. Using this function, the
SET
SETUP
signal
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
MENU
-
MENU
-
:
+ :
SET
:
+
SET
Exit
POWER
INDICATOR
:
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
Adjust
Adjust
are
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
Select another sub-menu
FACTORY
on.
Restore all factory default settings except
"LANGUAGE."
Press the
button to reset immediately.
RESET
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A14
only when
On Screen
Display(OSD)
Selection and
Adjustment
The OSD
screen will appear when you touch the
front side of the monitor.
(-)
button at the
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
on
the left side, whereas the non-applied
on the right side.Touch the
will appear
SETbutton to use the
screen
Main
adjusted
screen.
Sub
menu
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE For animation
TEXT For text
USER
adjust the USER sub-menu function,
Press the SET Button
USER
BRIGHTNESS
in videos
or
movies
images (Word processing etc.)
User
You
can
You
can save or
when
To
images
manually adjust brightness, ACE or RCM.
restore the adjusted value even
using a different environment setting.
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer) Selects the clarity mode.
RCM(Real Color Management) Selects the color mode.
0
Not
1
Green enhance
ACE
1
RCM
applied
2
Flesh tone
3
Color Enhance
2
SAVE
MENU
SET
Select the SAVE sub-menu using the SET
button and save the YES value using the
buttons.
NORMAL This is under normal
A15
operating
conditions.
-
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Touch the Power button.
Is the power on and the
power indicator blue or
Adjust the brightness
properly
see
if the power cord is connected
to the power outlet.
and the contrast.
green?
Is the power indicator
amber?
If the
the
display
mouse or
is in power
saving mode, try moving
pressing any key on the keyboard
bring up the screen.
Try to turn on the PC.
to
Do you see an "OUT
OF RANGE" message
on the screen?
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
Do you see a "CHECK
SIGNAL CABLE
This message appears when the signal cable
between your PC and your display is not
"message on the
connected. Check the
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
signal cable
and try
again.
screen?
Do you
see a
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
You
touch MENU button?
You
so
can secure
that
they
can
on
the screen?
the current control
cannot be
settings,
inadvertently changed.
unlock the OSD controls at any time
the MENU button for 5 seconds.
by touching
The message "OSD UNLOCKED" should
appear.
A16
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Touch the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Touch the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Touch the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
signal cable
is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
and
use a
the slot.
Set the color
color)
The
screen
blinks.
setting higher than 24
Settings.
at Control Panel
Check if the
screen
bits
(true
-
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be
A17
higher than AC100-240V 50/60Hz.
Troubleshooting
Have you installed the
Have you installed the
display driver?
Do you
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
display
driver?
Be sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Make
sure
to check if the video card
Plug&Play function.
monitor found"
message?
A18
supports
L1780U/L1780Q/L1781Q
Specifications
Display
17 inches (43.2cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
17 inches viewable
0.264mm
Sync Input
pixel pitch
Horizontal
30
Freq.
30
Vertical
56
Freq.
Input Form
Video
Input
-
-
-
15
Signal Input
Input
75Hz (Automatic)
pin D-Sub Connector
-
D connector
RGB Analog (0.7Vp-p/75ohm), Digital
Form
Max
VESA 1280
x
1024@75Hz
Recommend
VESA 1280
x
1024@60Hz
Plug&Play
DDC 2B
Power
Consumption
On Mode
Sleep Mode
≤2W
Off Mode
≤2W
Dimensions
Width
37.37
cm
Height
37.76
cm
&Weight
(with tilt stand)
:
Depth
0˚~157˚
6.42 cm (2.52 inches)
180˚ clockwise (Landscape
Tilt
Folding Height
Rotate
Power
Input
12V
Conditions
Tilt Stand
Signal
cable
Power cord
->
Portrait)
3A
Samsung.
Environmental
36W
/ 14.71 inches
/ 14.86 inches
24.00 cm / 9.44 inches
4.3 kg (9.47 lbs)
Net
Tilt/Height Range
(Analog)
(Digital)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
DVI
Resolution
83kHz
71kHz
AD-4212L
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Conditions
Storage
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Attached( O ), Detachable (
Attached(
)
), Detachable ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A19
notice.
L1980U/L1980Q/L1981Q
Specifications
Display
19 inches (48.18cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.294
Sync Input
mm
pixel pitch
Horizontal
30
Freq.
30
Vertical
Input
Video
Input
56
Freq.
Form
-
-
-
75Hz (Automatic)
15
Signal Input
pin D-Sub Connector
-
D connector
Input Form
RGB Analog (0.7Vp-p/75ohm), Digital
Max
VESA 1280
x
1024@75Hz
Recommend
VESA 1280
x
1024@60Hz
Plug&Play
DDC 2B
Power
On Mode
Sleep Mode
≤2W
Off Mode
≤2W
Dimensions
Width
42.23
cm
&Weight
(with tilt stand)
Height
Depth
41.01
cm
Consumption
:
0˚~157˚
70.20 cm (2.83 inches)
180˚ clockwise (Landscape
Tilt
Folding Height
Rotate
Power
Input
12V
36W
/ 16.63 inches
/ 16.15 inches
26.10 cm / 10.28inches
5.66 kg (12.48 lbs)
Net
Tilt/Height Range
(Analog)
(Digital)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
DVI
Resolution
83kHz
71kHz
->
Portrait)
3A
Samsung.
AD-4212L
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Tilt Stand
Attached( O ), Detachable (
Signal
cable
Power cord
Attached(
)
), Detachable ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A20
notice.
Specifications
Preset Modes
(Resolution)
17 inch monitor
Display Modes (Resolution)
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
123456789
10
11
12
13
Horizontal
Freq. (kHz)
Vertical
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.976
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
Freq. (Hz)
70
70
60
75
60
75
75
60
75
75
65
60
75
19 inch monitor
Display Modes (Resolution)
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
123456789
10
11
12
13
Horizontal
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.976
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
Indicator
MODE
On Mode
Sleep
Mode
Off Mode
Freq. (kHz)
LED Color
blue
amber
0ff
A21
Vertical
Freq. (Hz)
70
70
60
75
60
75
75
60
75
75
65
60
75
How to Install the Rack wall
This monitor meets
mounting
VESA-compliant mounting
interface
pad
specifications.
< Accessories >
1
Installation
4 Screws for wall
This
rear
2 Rack
guide
view
mount rack
-
4EA
3 Anchor
-
4EA
5 Screws for monitor stationary rack-4EA
represents a general model; your display may differ from the view as shown.
1
■Mark the locations of the
and drill fourholes 40 mm
2
or
racks that are to be mounted
in the wall.
on
the wall,
deeper
■Set the location of the rack 0˚~10˚lowerthan the eye level of the
■Clean the holes before
inserting
three
3
anchors at the
2
1
same
user.
depth.
3
Drill
Hole
2
■Contact 2 racks closely on the wall
where the anchors are inserted, and
fasten the 4 screws for wall mount
rack, as shown.
4 Screws for
wall mount
rac
Wall
A22
3 Anchor
How to Install the Rack wall
3
■Put the monitor
■To fix
a
on a
mounting
soft cloth
or
cushion with its front
facing
downward.
stand, push the folding stopper inwards until you hear the“click” sound
coin or“- shape screw driver, while pressing down the stand base to
“
using
a
the monitor.
100
Coin,
"-"shape
screwdriver
Folding Stopper
4
the four 5 screws about half into the slots in the base
hold
the two screws at the bottom to pull them inward, and
part,
then tighten the screws all the way.
■Tighten
Hold the 5 Screws for monitor
stationary rack and pull them
towards the
arrow
direction.
Kensington Security Slot- optional
a locking cable that
be purchased separately at
most computer stores
Connected to
can
5 Screws for monitor
stationary rack
5
■Make the screws in the stand base to fit into the 2 Rack grooves.
Then, fix it firmly by sliding it to the end of the groove.
■Rotate the monitor screen by 180 degrees and make the
cable connection part to face downward.
2
Rack
A23
Digitally yours
Download PDF

advertising