LG | L1932S-BF | LG L1932S-BF Owner’s Manual

User's Guide
L1732S
L1932S
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the product and quote this information to your
require service.
This unit has been
engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On
Use
Safety
only the power cord supplied
cord, make
with the unit. In
you use another power
national standards if not being
case
by the applicable
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
sure
that it is certified
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
technician for
plugs. They may
replacement.
Do not
the
Open
There
result in
are
a
dangerous. So
shock
or
are
frayed power
fire hazard. Call your service
Display.
serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
are no user
To Avoid Personal
Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire
or
Hazards:
display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Always turn
the
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
a
near
wet
water such as near a
basement,
Displays are provided with ventilation
of heat generated during operation. If
place
bathtub, washbowl, kitchen
swimming pool.
openings in the cabinet to allow the release
these openings are blocked, built-up heat
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
can cause
strike the Active Matrix LCD with anything hard
damage the Active Matrix LCD permanently.
Do not rub
mar, or
or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on
screen because over-spraying may cause electrical shock.
On
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
the
Connecting
Before
Display
setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Connecting
the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2. Align the hooks on the stand base with the matching slots in the base of
the monitor.
3.
Hook
Insert the hooks into slots.
Removing the stand
1.
2.
base
Place the monitor with its front
To
pull
remove
facing
downward
on a
cushion
the stand base, hold the bottom of the stand with
the base bottom latch with the other hand,
as
or
soft cloth.
one
shown in the
hand and
figure.
Bottom Latch
Important
This illustration
the items
depicts the general
shown in the picture.
model of connection. Your monitor may differ from
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
fall and get damaged or injure your foot.
In order to prevent injury, watch that your
sliding
door
or
attaching/detaching
a
fingers
stand
cover.
A3
are
not
product
caught when moving
a
may
Connecting
Before
the
Display
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position
Tilt
Range
:
of the
panel
in various ways for maximum comfort.
-5˚~25˚
Swivel :345˚
345
Ergonomic
ergonomic and comfortable viewing
monitor should not exceed 5 degrees.
It is recommended that in order to maintain
position,
the forward tilt
angle of the
an
A4
the
Connecting
Display
Using the Computer
1. Place the monitor in a convenient, well-ventilated location near your computer.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
3. Connect the power cord into a proper power outlet that
the
is
easily accessible
and close to
display.
Power Cord
Signal Cable
Varies according to model.
NOTE
This is
of the
This
a
simplified representation
rear
view.
view
represents a
general model; your display may
rear
differ from the view
as
2
Wall-outlet type
1
shown.
PC-outlet type
PC
MAC
Mac adapter
For Apple Macintosh use,
separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on
the supplied cable to a 15 pin 2 row connector.
4.
Press
on.
button
the front switch
panel
to turn the power
When monitor power is turned on, the 'Self
Setting
Function' is executed
NOTE
Self Image Setting
'
on
a
Image
automatically.
Function'? This function
provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
'
A5
the Fine Window function
Using
This model supports Fine Window function.
To use this function install the provided software, which is the Forte
Manager
software.
Please refer to the Forte
-
with the software
Notice
Forte
Manager User's Guide,
CD for installing instructions.
which has been
Manager software requires Microsoft Explorer
The Fine Window function
6.0
provided
or
later.
supports the Preset Mode and may
not
work under other modes.
Fine Window
:
This function allows the
users
to
the
improve
screen
image
for the
selected field.
There
other
are
two ways to select the field. One is
by selecting
Selecting
the
area
the
the target
This method allows you to select the size of the area.
can be moved and the size can be adjusted, however, it
an area :
The selected
area
will not
automatically
move
Selecting
setting.
by selecting
a
with windows
target : This method allows
The selected
area
and the size of the
or a
ou
target.
to select a
will follow the selected Windows
area
will be
specific
setting
adjusted automatically.
Windows
and the location
NOTE
the field for Fine Window function, press the AUTO/SET button
if the field selected is different from the one selected by the user.
When
selecting
A6
Control Panel Functions
Front Panel Controls
Bottom
Control
Function
MENU Button
Use this button to enter
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You
unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
can
"OSD UNLOCKED" should appear.
-+
Buttons
Use these buttons to select
Screen
adjust functions
Display.
hot
For
or
more
key
information, refer
A7
to page A14
in the On
Control Panel Functions
Control
Function
AUTO/SET
Use this button to enter
Button
Display.
a
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When
adjusting
your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best
display
mode is
17 inch monitor
:
1280x1024
19 inch monitor
:
1280x1024
Power Button
Use this button to turn the
Power Indicator
This Indicator
display
on or
off.
lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.
A8
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to stabilize
adjustments
for at least 30 minutes before
in the On Screen
-+
MENU
Display,
To
access a
becomes
Use the
control,
use
the
highlighted, press
-+
/
follow these steps:
AUTO/SET
Press the MENU Button, then the main
making image adjustments.
menu
-+
MENU
of the OSD appears.
-+
or
Buttons. When the icon you want
the AUTO/SET Button.
Buttons to
adjust
the
image to the
desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Button
once
to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
Automatic
save
With the OSD open,
you have made an adjustment the monitor
automatically save any adjustments you have made, even if you exit the menu
or open another menu. If you make an adjustment and then wait for the
OSD to
once
disappear, the adjustment will also been saved.
A9
On Screen
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
and setting menus.
The
Main
Sub-menu
menu
PICTURE
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
PRESET
COLOR
6500K
To customize the color of
9300K
the
screen
RED
GREEN
BLUE
POSITION
TRACKING
SETUP
HORIZONTAL
To
VERTICAL
screen
CLOCK
To
adjust the position
of the
PHASE
improve the clarity
stability of the screen
LANGUAGE
To customize the
screen
status for a user's
operating
OSD
HORIZONTAL
and
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
MOVIE / TEXT
FLATRON
F-ENGINE(
-
)
To select
USER
desired
or
customize
image settings
NORMAL
:
Adjustable
NOTE
The order of icons may differ
depending
on
A10
the model
(A10~A14).
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
Press the MENU
Menu Name
Button, then the main menu of the OSD appears.
PICTURE
Sub-menus
Icons
Button
Tip
MENU
-+
SET
:
:
Exit
Adjust (Decrease/Increase)
:
Enter
:
Select another sub-menu
NOTE
OSD
(On
Screen
Display)
menu
languages
on
A11
the monitor may differ from the manual.
On Screen
Main
Display(OSD)
menu
Selection and
Sub
Adjustment
Description
menu
PICTURE
PICTURE
of the
BRIGHTNESS
To
adjust the brightness
CONTRAST
To
adjust the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
screen.
contrast of the screen.
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
COLOR
Select the screen color.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
PRESET
COLOR
?
?
RED
Set your
own
red color levels.
GREEN
Set your
own
green color levels.
BLUE
Set your
own
blue color levels.
HORIZONTAL
To
move
image left
VERTICAL
To
move
image
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
POSITION
POSITION
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
A12
and
right.
up and down.
On Screen
Display(OSD)
Main
Selection and
Sub
menu
Adjustment
Description
menu
TRACKING
TRACKING
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
PHASE
To
the focus of the display. This
item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
adjust
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
SETUP
LANGUAGE
To choose the
control
SETUP
OSD
POSITION
-
+
To
adjust position
on
the
the
of the OSD window
screen.
If the output of the video card is different
the required specifications, the color
WHITE
BALANCE
MENU
names
language in which
are displayed.
level may deteriorate due to video
signal distortion. Using this function, the
SET
SETUP
signal
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
MENU
-
MENU
-
:
+ :
SET
:
+
SET
Exit
POWER
INDICATOR
:
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
Adjust
Adjust
are
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
Select another sub-menu
FACTORY
on.
Restore all factory default settings except
"LANGUAGE."
Press the + button to reset immediately.
RESET
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A13
only when
On Screen
Display(OSD)
The OSD
screen
right side
of the monitor.
Selection and
Adjustment
will appear when you touch the
(-)
button at the
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
screen
the left side, whereas the non-applied
will appear on the right side.Touch the
on
SETbutton to
Main
use
the
adjusted
menu
screen.
Sub
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE For animation
TEXT For text
USER
images
in videos
or
movies
images (Word processing etc.)
User
You
manually adjust brightness, ACE or RCM.
You can save or restore the adjusted value even
when using a different environment setting.
To
adjust the USER sub-menu function,
Press the SET Button
can
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer) Selects the clarity mode.
RCM(Real Color Management) Selects the color mode.
0
Not
1
Green enhance
2
Flesh tone
3
Color Enhance
applied
Select the SAVE sub-menu using the SET
button and save the YES value using the
buttons.
NORMAL This is under normal
A14
operating
conditions.
-
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator blue or
Adjust the brightness
properly
if the power cord is connected
to the power outlet.
see
and the contrast.
green?
Is the power indicator
amber?
If the
the
is in power saving mode, try moving
or pressing any key on the keyboard
display
mouse
bring up the screen.
Try to turn on the PC.
to
Do you see an "OUT
OF RANGE" message
on
the screen?
Do you see a "CHECK
SIGNAL CABLE"
message
screen?
Do you
on
the
see a
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
MENU button?
You
can secure
and try
again.
the screen?
the current control
settings,
inadvertently
they cannot be
changed. You can unlock the OSD controls
at any time by pushing the MENU button for
so
that
on
signal cable
several seconds: the message
"OSD UNLOCKED" will appear.
A15
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the AUTO/SET button to
automatically
ideal setting.
adjust your display image to the
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon
the on screen display.
Press the AUTO/SET button to
in
automatically
ideal setting.
adjust your display image to the
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
signal
cable is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
and
use a
the slot.
Set the color setting
color)
The
screen
blinks.
at Control
Check if the
higher than 24
Panel Settings.
screen
bits
(true
-
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be higher than AC100-240V 50/60Hz.
A16
Troubleshooting
Have you installed the
driver?
display
Have you installed the
display driver?
display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Do you
Make
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
Be
sure
to install the
sure
to check if the video card
Plug&Play function.
monitor found"
message?
A17
supports
17inch
Specifications
Display
Flat Panel Active matrix-TFT LCD
17 inches
(43.2cm)
Anti-Glare coating
17 inches viewable
0.264
Sync Input
Video
Input
Resolution
mm
pixel pitch
Horizontal
Freq.
Vertical Freq.
Input Form
30
83kHz
Signal Input
15
Input Form
RGB Analog (0.7Vp-p/75ohm)
Max
VESA 1280
x
Recommend
VESA 1280
x
(Automatic)
56 75Hz (Automatic)
Separate TTL, Positive/Negative
Composite TTL, Positive/Negative
SOG (Sync On Green)
-
-
pin D-Sub Connector
1024@75Hz
1024@60Hz
Plug&Play
DDC 2B
Power
On Mode
Sleep Mode
35W
≤1W
Off Mode
≤1W
Dimensions
Width
39.00
cm
/ 15.35 inches
&Weight
(with tilt stand)
Height
Depth
40.60
cm
/ 15.98 inches
23.20
cm
/ 9.13 inches
Net
4.10
Tilt
-5˚~25˚
345˚
Consumption
Tilt
Range
:
Swivel
Power
Input
Environmental
Conditions
kg (9.04 lbs)
AC 100-240V~50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to
35 ˚C
10 % to 80 %
Humidity
non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Tilt Stand
Signal
cable
Power cord
),
Detachable
(O)
Attached( O ),
Detachable
(
Attached(
Wall-outlet type
or
)
PC-outlet type
NOTE
Information in this document is
subject
to
change without
A18
notice.
19inch
Specifications
Display
19 inches
(48.18cm)
Anti-Glare coating
Flat Panel Active matrix-TFT LCD
19 inches viewable
0.294mm
Sync Input
Video
Input
Resolution
pixel pitch
Horizontal
Freq.
Vertical Freq.
Input Form
30
83kHz
Signal Input
15
Input Form
RGB Analog (0.7Vp-p/75ohm)
Max
VESA 1280
x
Recommend
VESA 1280
x
(Automatic)
56 75Hz (Automatic)
Separate TTL, Positive/Negative
Composite TTL, Positive/Negative
SOG (Sync On Green)
-
-
pin D-Sub Connector
1024@75Hz
1024@60Hz
Plug&Play
DDC 2B
Power
On Mode
Sleep Mode
39W
≤1W
Off Mode
≤1W
Dimensions
Width
43.00
cm
/ 16.92inches
&Weight
(with tilt stand)
Height
Depth
42.90
cm
/ 16.88 inches
23.20
cm
/ 9.13 inches
Net
4.6 kg (10.14 lbs)
Tilt
-5˚~25˚
Consumption
Tilt
Range
:
345˚
Swivel
Power
Input
Environmental
Conditions
AC 100-240V~50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to
10 % to 80 %
Humidity
Storage Conditions
Temperature -20˚C to
Signal
cable
Power cord
Attached(
non-Condensing
60 ˚C
5 % to 95 % non-Condensing
Humidity
Tilt Stand
35 ˚C
), Detachable ( O )
Attached( O ), Detachable (
Wall-outlet type
or
)
PC-outlet type
NOTE
Information in this document is
subject
to
change without
A19
notice.
Specifications
Preset Modes
(Resolution)
Display Modes (Resolution)
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
123456789
10
11
*12
13
Horizontal
Freq. (kHz)
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.976
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
Vertical
Freq. (Hz)
70
70
60
75
60
75
75
60
75
75
65
60
75
*Recommend Mode
Indicator
Mode
On Mode
Sleep
Mode
Off Mode
LED Color
Blue
Amber
Off
A20
How to Install the VESA Standard wall
This monitor meets
mounting
VESA-compliant mounting
interface
pad
specifications.
1.
Remove the Stand Cover.
Stand Cover
2.
Please the monitor
front side
3. Separate
4.
on a
piece
downward.
the stand base using
of cloth
or
other soft surface with the
facing
Install the VESA standrad wall
a
screwdriver
as
shown in the
picture.
mounting.
VESA wall
mounting
Connected to another
and wall-mounted
object (stand type
type. This monitor
VESA-compliant mounting
interface pad.-optional)
For further information, refer to the VESA
Wall Mounting Instruction Guide.
accepts
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased
separately at most computer
stores
A21
a
Digitally yours
Download PDF