LG | L1970H-WF | LG L1970H-WF Owner’s Manual

User's Guide
L1770H
L1970H
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached
dealer when you
on
the
product and quote this information to your
require service.
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the
cord, make
power cord supplied with the unit. In case you use another power
that it is certified by the applicable national standards if not being
sure
provided by the supplier. If the
manufacturer
or
power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
or listed on the display. If you are not sure what type of power supply
this manual
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the
Contact your dealer if the display is not operating properly.
power is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
A1
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
near water
a wet
such
basement,
as near a
or near a
place
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
or strike the Active Matrix LCD with anything hard
damage the Active Matrix LCD permanently.
Do not rub
mar, or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD
On
panel.
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connecting
the
Display
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
For the desktop monitor, install the computer with the stand unfolded,
for ARM(wall mounting), install the computer with the stand folded.
Unfolding the stand
base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2. Press the downside of the stand base with your left hand as shown in the picture.
3. With your left hand pressing the stand base, press the folding button using your right hand.
4. To release the folding, relieve the pressure on the left hand slowly with your right hand still
pressing
the
folding
button.
5. A spring is clicked on and the stand is brought out by itself from the standbase as shown in
the
picture.
6. Pull out the stand as shown in the picture and the stand will hold up.
A3
Folding the stand
1.
base
Face the front of the monitor and
sequence shown in the picture.
This illustration
depicts
the
push
general model
picture.
the monitor backwards,
following
the
of connection. Your monitor may
differ from the items shown in the
Do not touch
folding
or
apply force
to the monitor screen while
expanding
or
the stand base.
Positioning your display
1. Adjust the position
Tilt
2.
Range
of the
The direction of the
the
degree
panel
in various ways for maximum comfort.
:0˚~30
arrow
indicates the direction to fold the
product.
It does not indicate
of the usage.
Ergonomic
It is recommended that in order to maintain
position,
the forward tilt
angle of the
an
ergonomic and comfortable viewing
degrees.
monitor should not exceed 5
A4
Connecting
the
Display
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2. Connect the power cable with the AC adapter (AC power supply) ②, and
then
plug
the cable in the outlet.
③ (Voltage will
be
Digital signal
automatically controlled.)
Analog signal
DC 12V
D-SUB
JACK
DVI-D
When
connecting to
wall concent
3
1
2
AC
When
adapter
connecting
to
PC
MAC
Mac adapter
For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
PC
A5
a
PC
a
3. Touch
button
on
the front switch
panel
to turn the power on. When
Setting Function' is
monitor power is turned on, the 'Self Image
executed automatically.(Only Analog Mode)
NOTE
'
Self Image Setting Function'? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically
adjusts the display to optimal settings for individual input signals. If you want to adjust the
monitor while in use, or wish to manually run this function once again, touch the
'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the
'FACTORY RESET' option on the OSD adjustment menu. However, be aware that this
option initializes all the menu items except 'LANGUAGE'.
A6
Using
the Fine Window function
This model supports Fine Window function.
To use this function install the provided software, which is the Forte
Manager
software.
Please refer to the Forte
-
with the software CD for
Notice
Forte
Manager User's Guide,
installing instructions.
which has been
Manager software requires Microsoft Explorer
The Fine Window function
6.0
or
provided
later.
supports the Preset Mode and may
not
work under other modes.
Fine Window
:
This function allows the
users
to
improve
the
screen
image
for the
selected field.
There
other
are
two ways to select the field. One is
by selecting
Selecting
an area :
area can
will not
automatically
Selecting
setting.
a
The selected
with windows
target : This method allows
area
and the size of the
the
area
the
This method allows you to select the size of the area.
be moved and the size can be adjusted, however, it
The selected
move
by selecting
the target
or a
ou
target.
to select a
will follow the selected Windows
area
will be
specific
setting
adjusted automatically.
Windows
and the location
NOTE
selecting the field for Fine Window function, press the AUTO/SET button
if the field selected is different from the one selected by the user.
When
A7
Control Panel Functions
Front Panel Controls
Bottom
Control
MENU Button
Function
Use this button to enter
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Touch and hold the MENU button for serval seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by touching
the MENU button for serva seconds. The message
"OSD UNLOCKED" should appear.
A8
Control Panel Functions
Control
-
-
+
Function
Buttons
Use these buttons to select
Screen
hot
Button
For
+
Button
or
adjust functions
key
information, refer
more
SOURCE hot
to page A15
key
Use this button to make Dsub
or
This feature is used when two
computers
to the
in the On
Display.
display.
The default
DVI connector active.
setting
AUTO/SET
Use this button to enter
Button
Display.
a
are
connected
is Dsub.
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always touch
the AUTO/SET button before entering the On
Screen
Display(OSD). This will automatically adjust
display image to the ideal settings for the
current screen resolution size (display mode).
your
The best
display
mode is
17 inch monitor
:
1280x1024
19 inch monitor
:
1280x1024
Power Button
Use this button to turn the
Power Indicator
This Indicator
lights
display
on or
up blue when the
off.
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
to amber.
A9
this indicator color
changes
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
MENU
-
in the On Screen
+
Display, follow these steps:
AUTO/SET
Touch the MENU Button, then the main
To
access a
becomes
Use the
control,
use
highlighted,
the
-
or +
making image adjustments.
-
menu
+
MENU
of the OSD appears.
Buttons. When the icon you want
touch the AUTO/SET Button.
/ + Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
-
Touch the MENU Button
once to return to
the main
menu to
select another
function. Touch the MENU Button twice to exit from the OSD.
Automatic
save
With the OSD open,
you have made an adjustment the monitor
automatically
any adjustments you have made, even if you exit the menu
or open another menu. If you make an adjustment and then wait for the
OSD to disappear, the adjustment will also been saved.
once
save
A10
On Screen
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
and setting menus.
The
Main
Sub-menu
menu
PICTURE
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
PRESET
COLOR
6500K
To customize the color of
9300K
the
screen
RED
GREEN
BLUE
POSITION
TRACKING
SETUP
HORIZONTAL
To
VERTICAL
screen
CLOCK
To
adjust the position
of the
PHASE
improve the clarity
stability of the screen
LANGUAGE
To customize the
screen
status for a user's
operating
OSD
HORIZONTAL
and
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
MOVIE/TEXT
FLATRON
F-ENGINE(
-
)
To select
USER
desired
or
customize
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A11
the model (A11~A15).
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
Touch the MENU
Button, then the main menu of the OSD appears.
PICTURE
Menu Name
Sub-menus
Icons
Button
Tip
MENU
-
+
:
:
SET
*
You
the
can use
the Forte
:
Enter
:
Select another sub-menu
Manager program when configuring or controlling
more details, refer to the manual included in the
For
display.
Manager Software CD.
screen
Forte
Exit
Adjust (Decrease/Increase)
NOTE
OSD (On Screen
Display)
menu
languages
on
A12
the monitor may differ from the manual.
On Screen
Selection and
Display(OSD)
Main
menu
Sub
Adjustment
Description
menu
PICTURE
PICTURE
To
adjust the brightness
To
adjust the
BRIGHTNESS
CONTRAST
of the
contrast of the
screen.
screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
GAMMA
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
COLOR
Select the screen color.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
PRESET
COLOR
?
?
RED
Set your
own
red color levels.
GREEN
Set your
own
green color levels.
BLUE
Set your
own
blue color levels.
HORIZONTAL
To
move
image left
VERTICAL
To
move
image
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
POSITION
POSITION
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
A13
and
right.
up and down.
On Screen
Display(OSD)
Main
Selection and
Sub
menu
Adjustment
Description
menu
TRACKING
CLOCK
TRACKING
To minimize any vertical bars or stripes
visible on the screen background.The
horizontal
PHASE
To
adjust
screen
size will also
the focus of the
change.
display.
This
item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
SETUP
LANGUAGE
To choose the
control
language in which
displayed.
the
names are
SETUP
OSD
POSITION
-
+
adjust position
on
the
of the OSD window
screen.
If the output of the video card is different
required specifications, the color
WHITE
BALANCE
MENU
To
the
level may deteriorate due to video
signal distortion. Using this function, the
SET
SETUP
signal
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
MENU
-
MENU
-
:
+ :
SET
:
+
SET
Exit
POWER
INDICATOR
:
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
Adjust
Adjust
are
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
Select another sub-menu
FACTORY
on.
Restore all factory default settings except
"LANGUAGE."
Press the + button to reset immediately.
RESET
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A14
only when
On Screen
Display(OSD)
Selection and
Adjustment
The OSD
screen will appear when you touch the
front side of the monitor.
(-)
button at the
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not
applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
on
the left side, whereas the non-applied
on the right side.Touch the
will appear
SETbutton to use the
screen
Main
adjusted
screen.
Sub
menu
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE For animation
TEXT For text
USER
adjust the USER sub-menu function,
Press the SET Button
USER
BRIGHTNESS
in videos
or
movies
images (Word processing etc.)
User
You
can
You
can save or
when
To
images
manually adjust brightness, ACE or RCM.
restore the adjusted value even
using a different environment setting.
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer) Selects the clarity mode.
RCM(Real Color Management) Selects the color mode.
0
Not
1
Green enhance
ACE
1
RCM
applied
2
Flesh tone
3
Color Enhance
2
SAVE
MENU
SET
Select the SAVE sub-menu using the SET
button and save the YES value using the
buttons.
NORMAL This is under normal
A15
operating
conditions.
-
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Touch the Power button.
Is the power on and the
power indicator blue or
Adjust the brightness
properly
see
if the power cord is connected
to the power outlet.
and the contrast.
green?
Is the power indicator
amber?
If the
the
display
mouse or
is in power
saving mode, try moving
pressing any key on the keyboard
bring up the screen.
Try to turn on the PC.
to
Do you see an "OUT
OF RANGE" message
on the screen?
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
Do you see a "CHECK
SIGNAL CABLE
This message appears when the signal cable
between your PC and your display is not
"message on the
connected. Check the
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
signal
cable and try
again.
screen?
Do you
see a
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
You
touch MENU button?
You
so
can secure
that
they
can
on
the screen?
the current control
cannot be
settings,
inadvertently changed.
unlock the OSD controls at any time
the MENU button for serval
by touching
seconds. The message "OSD UNLOCKED"
should appear.
A16
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Touch the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Touch the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Touch the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
signal
cable is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
and
use a
the slot.
Set the color
color)
The
screen
blinks.
setting higher than 24
Settings.
at Control Panel
Check if the
screen
bits
(true
-
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be
A17
higher than
AC100-240V 50/60Hz.
Troubleshooting
Have you installed the
Have you installed the
display driver?
Do you
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
display
driver?
Be sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Make
sure
to check if the video card
Plug&Play function.
monitor found"
message?
A18
supports
17inch
Specifications
Display
17 inches (43.27cm) Flat Panel Active matrix-TFT LCD
Anti-Glare
coating
17 inches viewable
0.264mm
Sync Input
pixel pitch
Horizontal
30
Freq.
30
Vertical
Input
Video
Input
56
Freq.
Form
83kHz
-
71kHz
-
75Hz (Automatic)
-
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
15
Signal Input
pin
DVI
Input
Resolution
(Analog)
(Digital)
Form
-
D-Sub Connector
D connector
RGB
Analog (0.7Vp-p/75ohm), Digital
Digital: VESA 1280 x 1024@60Hz
D-sub Analog: VESA 1280 x 1024@75Hz
Max
DVI
Recommend
VESA 1280
Plug&Play
DDC 2B
Power
On Mode
Consumption
Sleep
:
Mode
Full
1024@60Hz
35W
≤1W
≤1W
Off Mode
Dimensions
x
Up
Folded Position
Position
&Weight
(with tilt stand)
Til
tRange
Power
AC/DC
Input
Adapter
Environmental
Conditions
Tilt Stand
Signal
cable
Power cord
Width
36.95
cm
/ 14.55inches
36.95cm / 14.55 inches
Height
Depth
37.74
cm
/ 14.86 inches
31.47cm / 12.39 inches
23.65
cm
/ 9.31 inches
Net
4.3
Tilt
0˚~30˚
12V
5.79
cm
/ 2.28inches
kg (9.48 lbs)
3A
DVE. DSA-0421S-12 1
Operating Conditions
10˚C to 35 ˚C
Temperature
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Attached( O ), Detachable (
Attached(
)
), Detachable ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change
A19
without notice.
19inch
Specifications
Display
19 inches (48.19cm) Flat Panel Active matrix-TFT LCD
Anti-Glare
coating
19 inches viewable
0.294mm
Sync Input
pixel pitch
Horizontal
30
Freq.
Vertical
Input
Video
Input
56
Freq.
Form
83kHz
-
30
-
75Hz (Automatic)
-
15
pin
DVI
Resolution
(Analog)
(Digital)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Signal Input
Input
71kHz
Form
-
D-Sub Connector
D connector
RGB
Analog (0.7Vp-p/75ohm), Digital
Digital: VESA 1280 x 1024@60Hz
D-sub Analog: VESA 1280 x 1024@75Hz
Max
DVI
Recommend
VESA 1280
Plug&Play
DDC 2B
Power
On Mode
Consumption
Sleep
:
Mode
Full
1024@60Hz
39W
≤1W
≤1W
Off Mode
Dimensions
x
Up
Folded Position
Position
&Weight
(with tilt stand)
Til
tRange
Power
Input
AC/DC Adapter
Environmental
Conditions
Tilt Stand
Signal
cable
Power cord
Width
41.23
Height
Depth
41.4
cm
cm
23.65
/ 16.23inches
5.4
Tilt
0˚~30˚
cm
/ 16.23inches
34.52cm / 13.59 inches
/ 9.31 inches
cm
Net
12V
41.23
/ 16.29 inches
6.3
cm
/ 2.48inches
kg (11.91 lbs)
3A
DVE. DSA-0421S-12 1
Operating Conditions
10˚C to 35 ˚C
Temperature
10 % to 80 % non-Condensing
Humidity
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 95 % non-Condensing
Humidity
Attached( O ), Detachable (
Attached(
)
), Detachable ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change
A20
without notice.
Specifications
Preset Modes
(Resolution)
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
*12
13
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
Horizontal
Freq. (kHz)
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.023
68.681
61.805
63.981
79.976
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
Vertical
Freq. (Hz)
70
70
60
75
60
75
75
60
75
75
65
60
75
*Recommend Mode
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
blue
amber
0ff
A21
How to Install the VESA Standard wall
This monitor meets
mounting
VESA-compliant mounting
interface
pad
specifications.
1
2
3
■Face the front of the monitor and push the monitor backwards, following
the sequence shown in the picture.
■Put the monitor on a soft cloth or cushion with its front facing downward.
■Turn the 4 screws tight to the end of the standbase.
■Install the VESA standrad wall
Kensington Security
Slot-
VESA wall mounting
Connected to another object (stand type
and wall-mounted type. This monitor
optional
Connected to a locking
cable that can be purchased
separately
at most
computer
mounting.
stores
A22
accepts
a
VESA-compliant mounting
interface pad.- optional)
For further information, refer to the VESA
Wall Mounting Instruction Guide.
Digitally yours
Download PDF

advertising