LG | L2010P | LG L2010P Owner’s Manual

User's Guide
L2010P
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the back cover and quote this information to your
require service.
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety, however improper use may result in potential e shock or fire hazards.
In order to allow the proper operation of all safeguards incorporated in this
display, observe the following basic rules for its installation, use, and
servicing.
On
Safety
power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
Use
only the
manufacturer
or
the nearest authorized
repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
There
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
are no user
To Avoid Personal
Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
A1
On Installation
Do not allow
the
anything
display where the
Do not
use
this
to rest upon or roll over the power
power cord is
display
sink, laundry tub, in
near water
a wet
cord, and do
not
place
subject to damage.
such
basement,
as near a
or near a
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
can cause
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub
mar,
strike the Active Matrix LCD with
anything hard
or damage the Active Matrix LCD permanently.
or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
Connecting
Before
the
Display
setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel
Tilt
in various ways for maximum comfort.
Range : -5˚~30˚
Height Range
:
Swivel
:
90˚
maximun 3.15 inch (80.0mm)
80.0mm
Unfasten the
[Stand lock]
clockwise to adjust the
height of the stand.
Landscape
& Portrait
:
You
can rotate
the
panel 90o clockwise.
(* For detailed information, please refer to the Pivot Sofeware CD provided.)
*
Make
sure
not to touch the
floor when the head rotates
to
use
the Pivot function.
Ergonomic
It is recommended that in order to maintain
position,
the forward tilt angle of the
ergonomic and comfortable viewing
monitor should not exceed 5 degrees.
an
A3
Connecting
the
Display
Using the Computer
1.
2.
Place the monitor in
convenient, well-ventilated location near your computer.
To adjust height of your monitor, unlock the stand lock on top of the stand.
Connect the signal cable. When attached, tighten the thumbscrews to secure
a
the connection.
3. Connect the power cord into a proper power outlet
that is
easily accessible and close to the display.
Signal Cable
Power Cord
Digital signal
-
Analog signal
DVI*
*
D-sub*
Varies according to model.
PUSH
Wall-outlet
type*
2
1
PC-outlet
type*
PC
MAC
Mac adapter
For Apple Macintosh use,
separate plug adapter is
needed to change the
15 pin high density (3 row)
a
D-sub VGA connector on
thesupplied cable to a 15 pin
2 row connector.
NOTE
This is
This
simplified representation of the rear view.
rear view represents a general model; your display may differ from the view as shown.
a
A4
Connecting
the
Display
To arrange cables in order
1.
Press the
push button, and pull the stand cover down
to
separate it from the
stand.
Stand
Push button
cover
PUSH
PUSH
2. After connecting cables, put the stand cover correctly into the holes on the
stand. If
securely connected,
you
can
hear the click sound from the latch.
DVI
PUSH
A5
D-Sub
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the
Power
This Indicator
(DPMS)
Indicator
MENU Button
display
on or
off.
lights up green when the display
operates normally. If the display is in DPM (Energy
Saving) mode, this indicator color changes to amber.
Use this button to enter
or
exit the On Screen
Display.
Buttons
Use these buttons to choose
the On Screen
SELECT Button
A6
adjust
items in
Display.
Use this button to enter
Display.
or
a
selection in the On Screen
Control Panel Functions
Control
Direct Access Function
up Contrast and
Bring
Brightness adjustment.
LIGHT VIEW:
LIGHT VIEW
DAY
TEXT
MOVIE
PHOTO
NIGHT
TEXT
This feature lets you easily select the best desired image condition
optimized to the environment (ambient illumination, image types etc.).
MOVIE
PHOTO
?
DAY
?
NIGHT : Dark ambient illumination
?
TEXT : For text
USER MODE
?
?
?
:
Bright ambient illumination
images (Word processing etc.)
MOVIE : For animation images in videos or movies
PHOTO : For pictures or drawings
USER MODE : For use under user setup image conditions
(Brightness, contrast and color tint are selected by the user in
OSD Screen Setup Menu.)
AUTO
adjustment
function
When
adjusting your display settings, always press the AUTO
button before entering the On Screen Display(OSD). This will
automatically adjust your display image to the ideal settings
for the current screen resolution size (display mode).
The best
display
mode is 1600 X 1200@60Hz.
SOURCE Selection:
SOURCE
SELECT
Use this button to make DVI DIGITAL, DVI ANALOG or DSUB
ANALOG connector active. This feature is used when two computers
are
connected to the
display.
?
DVI DIGITAL
?
DVI ANALOG
?
DSUB ANALOG
The default
setting
is Dsub.
CONTROLS LOCKED/UNLOCKED:
MENU and
This function allows you to secure the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button and
button for 3
seconds: the message "CONTROLS LOCKED" appears.
You
unlock the OSD controls at any time by
the MENU button and
button for 3 seconds:
can
pushing
the message "CONTROLS UNLOCKED" will appear.
A7
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display, follow these steps:
Press the MENU Button, then the main
To
access a
becomes
control,
highlighted,
Use the
menu
of the OSD appears.
Buttons. When the icon you want
press the SELECT Button.
use
the
making image adjustments.
or
Buttons to
adjust the item
to the desired level.
Accept the changes by pressing the SELECT Button.
Exit the OSD
by Pressing the MENU Button.
A8
On Screen
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
and setting menus.
The
Main
menu
CONTRAST/
BRIGHTNESS
COLOR
Sub
A
menu
D
Reference
CONTRAST
To
adjust the brightness
contrast of the
BRIGHTNESS
USER(R/G/B)
and
screen
To customize the color of the
ADJUSTMENT 9300K
screen
6500K
IMAGE
H POSITION
To
POSITION
V POSITION
screen
TRACKING
AUTO
adjust the position
of the
To
improve the clarity and
stability of the screen
CLOCK
PHASE
SETUP
LANGUAGE
To customize the
IMAGE SIZE
for
a
user's
adjust position
screen
operating
status
environment
TRANSPARENCY
ZOOM
OSD
HORIZONTAL
To
POSITION
VERTICAL
window
:
D
:
the
screen
Adjustable
Analog Input
Digital Input
:
A
on
of the OSD
NOTE
The order of icons may differ
depending
on
A9
the model
(A10~A12).
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
introduced to the
were
NOTE
OSD (On Screen
To
Display)
menu
languages
adjust the brightness and
OSD
on
the monitor may differ from the manual.
contrast of the
Adjust
screen
Description
CONTRAST/BRIGHTNESS
CONTRAST
To
RGB
the contrast of the
adjust
screen.
BRIGHTNESS
CONTRAST
OSD
To
100
BRIGHTNESS
99
To customize the color of the
OSD
9300K
of the
screen.
Description
RED/GREEN/BLUE
USER
Set your
USER
brightness
screen
Adjust
COLOR ADJUSTMENT
RGB
the
adjust
own
color levels.
6500K
RED
50
GREEN
50
BLUE
50
9300K
Select the
6500K
?
9300K:
?
6500K:
screen
Slightly
Slightly
color.
bluish white.
reddish white.
OSD
To
adjust the position of the
OSD
screen
Adjust
Description
IMAGE POSITION
Horizontal Position
To
RGB
move
image
left and
right.
Vertical Position
OSD
HORIZONTAL
50
VERTICAL
50
To
A10
move
image
up and down.
On Screen
To
Display(OSD)
improve
OSD
the
clarity
and
AUTO
Adjustment
of the
stability
Adjust
screen
Description
AUTO
TRACKING
RGB
Selection and
50
PHASE
86
analog signal input
only. This button is for the automatic
adjustment of the screen position, clock
phase.
ON
CLOCK
This function is suitable for
CLOCK
OSD
To minimize any vertical bars or stripes visible
on the screen background.The horizontal
screen
PHASE
and
To
size will also
adjust the
change.
focus of the
display.
This item
allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Phase
adjustment should
adjusting the Clock.
To customize the
OSD
screen
status for
user's
a
Adjust
LANGUAGE To choose the
control
LANGUAGE
ENGLISH
IMAGE SIZE
FULL
50
TRANSPARENCY
names
language in which
are displayed.
the
IMAGE SIZE This function
displays the image in
original size or enlarged size so as
the full screen of the LCD panel.
ZOOM
OSD
operating environment
Description
SETUP
RGB
be done after
its
to fit in
1600x1200 75kHz / 60Hz
ELAPSED TIME
00004H
TRANSPARENCY
To
adjust
the
transparency of the OSD
menu screen.
ZOOM
To
adjust horizontal
simultaneously.
and vertical
image
If you want to move the zooming point,
the H/V POSITION function in the submenu.
when
However, if the monitor
zooming
use
turns off
in and out the screen, the
monitor will be returned to
A11
size
original
screen.
On Screen
To
Display(OSD)
Selection and
adjust position of the
OSD
OSD window
Adjust
OSD POSITION
on
the
screen
Description
Horizontal Position
To
RGB
Adjustment
adjust
horizontal
position
of the OSD window
on
the
screen.
Vertical Position
To
OSD
HORIZONTAL
50
VERTICAL
50
adjust vertical position
screen.
A12
of the OSD window
on
the
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator green?
Adjust the brightness
Is the power indicator
amber?
If the
properly
the
if the power cord is connected
to the power outlet.
see
is in power
saving mode, try moving
or pressing any key on the keyboard
display
mouse
and the contrast.
up the screen.
Make sure if the power is
to
bring
Try to turn
on
on.
the PC.
Do you see an "OUT OF
RANGE" message on
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
the screen?
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
Do you see a "CHECK
SIGNAL CABLE"
This message appears when the signal cable
between your PC and your display is not
message on the screen?
connected. Check the
Do you
see a
"CONTROLS LOCKED" message
Do you see "CONTROLS
LOCKED" when you
push
signal cable
MENU button?
You
on
and
the
try again.
screen.
the current control
settings, so
that they cannot be inadvertently changed. You
can unlock the OSD controls at any time by
button for 3
pushing the MENU button and
can secure
seconds: the message "CONTROLS
UNLOCKED" will appear.
A13
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO button to
automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, adjust the
image position using the H position and V
position icon in the on screen display.
Check Control Panel --> Display -->
Settings and see if the frequency or the
resolution were changed. If yes, readjust the
video card to the recommend resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the AUTO button to
automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon
in the on screen display.
Press the AUTO button to
automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the
on screen display.
Check Control Panel --> Display -->
Settings and adjust the display to the
recommended resolution or adjust the display
image to the ideal setting. Set the color setting
higher than 24 bits (true color).
Check if the
and
cable is
signal
properly
connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted
use a
in the slot.
Set the color
color)
The
screen
blinks.
at
setting higher than 24
Control Panel Settings.
Make
(true
-
Check if the
and if yes,
resolution.
bits
screen
change
is set to interlace mode
it to the recommend
the power voltage is high enough, It
has to be hgher than AC100-240V 50/60Hz.
sure
A14
Troubleshooting
"IMAGE SIZE" function
"IMAGE SIZE" function
on
OSD
menu
does not
work?
on
OSD
menu
does not work.
Check if the resolution is set
as
1600x1200
less
than 512x360.
The
optimal resolution is 1600x1200 and the
image is fully displayed on the monitor and is not
converted as 1:1 image size. If the resolution is
less than 512x360, the image size is smaller than
that of the OSD's and is also not converted
image
Have you installed the
Have you installed the
display driver?
Do you
or
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
size.
driver?
display
Be
as
sure
to install the
display driver from the
(or diskette) that comes with
display driver CD
your display. Or, you
also download the
can
driver from
our
Make
to check if the video card
sure
web site:
http://www.lge.com.
supports
Plug&Play function.
monitor found"
message?
USB function
USB function cannot be
Check if the USB cable is
setup.
Check if the PC and OS
For verification of USB
correctly connected.
are USB compliant.
support, consult the
manufacturer of each system.
A15
1:1
Specifications
20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
20.1 inches viewable
0.255mm pixel pitch
Horizontal
Sync Input
Freq.
Analog
Digital
Vertical
Video
Input
56
Freq.
-
:
:
28
92kHz (Automatic)
28-80kHz (Automatic)
-
85Hz (Automatic)
Input Form
Separate TTL, Positive/Negative
Composite TTL Positive/Negative
SOG (Sync On Green)
Digital
Signal Input
pin D-Sub Connector
DVI I connector (Digital/Analog)
RGB Analog (0.7Vp-p/75ohm), Digital
15
-
Input Form
D-Sub : Analog VESA 1600 x 1200@60Hz
DVI : Analog VESA 1600 x 1200@60Hz
Digital VESA 1600 x 1200@60Hz
Max
Resolution
-
-
-
VESA 1280
VESA 1600
Recommend
Plug&Play
DDC 2B
Power
Normal
:
Consumption
Stand-by/Suspend
≤ 3W
DPM Off
≤3W
Power
key Off
x
x
1024@70Hz
1200@60Hz
60W
≤ 3W
Power Cut-off switch off ≤ 1W
*():withUSB
Dimensions
Width
&Weight
(with tilt/ swivel
stand)
Height
44.6 0cm / 17.56 inches
44.56 cm / 17.54 inches(Min)
52.56cm / 20.69 inches(Max)
Depth
23.73cm / 9.34 inches
Net
9.5
Tilt range
Swivel range
-5˚~30˚
90˚
80/ 3.15 inches
Tilt/Swivel
Range
Height
range
Rotate
Power
Input
Environmental
Conditions
AC 100-240V
kg
90˚clockwise(Landscape
->
Portrait
50/60Hz 1.2A
~
Operating Conditions
10˚C to 35 ˚C
Temperature
10 % to 80 % non-Condensing
Humidity
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 95 % non-Condensing
Humidity
A16
Specifications
Tilt/Swivel Stand
Attached( O ), Detached (
Signal cable
Attached(
Power cord
Wall-outlet type
)
), Detached ( O )
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A17
notice.
Preset Modes
123456789
(Resolution)
640
x
350
31.47
70
640
x
480
31.47
60
640
x
480
37.50
75
640
x
480
43.27
85
720
x
400
31.47
70
800
x
600
37.88
60
800
x
600
46.88
75
800
x
600
53.67
85
832
x
624
49.72
75
10
1024
x
768
48.36
60
11
1024
x
768
60.02
75
12
1024
x
768
68.68
85
13
1152
x
870
68.68
75
14
1152
x
900
61.80
65.96
15
1280
x
1024
63.98
60.02
16
1280
x
1024
79.98
75.02
17
1600
x
1024
62.11
60
18
1600
x
1200
75.00
60
Indicator
Normal
green
Stand-by/Suspend
amber
DPMS Off
amber
Specifications
VESA wall
mounting
Connected to another
mounted
type. This monitor accepts
compliant mounting
and wall-
object (stand type
interface
VESA-
a
pad.- optional)
For further information, refer to the VESA Wall
Mounting
Instruction Guide.
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased
separately at most
computer
A19
stores
Specifications
Signal
Connector Pin
1
8
917
16
24
Assignment
C2
C1
C5
C3
C4
DVI-I Connector
Pin
Pin
Signal(DVI-I)
Signal(DVI-I)
T. M. D. S. Data2-
16
Hot
T. M. D. S. Data2+
17
T. M. D. S. Data0-
123456789
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
T. M. D. S. Data4+
20
T. M. D. S. Data5-
DDC Clock
21
T. M. D. S. Data5+
DDC Data
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
T. M. D. S. Data1-
24
T. M. D. S. Clock-
10
T. M. D. S. Data1+
C1
Analog
Red
11
T. M. D. S. Data1/3 Shield
C2
Analog
Green
12
T. M. D. S. Data3-
C3
Analog
Blue
13
T. M. D. S. Data3+
C4
Analog
H.
14
+5V Power
C5
Analog
Ground
15
Ground (return for +5V,
H. Sync. and V. Sync.)
Analog
T. M. D. S.
Vertical
(Transition
Sync.
Minimized Differential
A20
Signaling)
Plug
Detect
Sync.
Making
use
of USB
(Universal
Serial
Bus) Optional
-
(Universal Serial Bus) is an innovation in connecting your different
desktop peripherals conveniently to your computer. By using the USB, you will
be able to connect your mouse, keyboard, and other peripherals to your display
instead of having to connect them to your computer. This will give you greater
flexibility in setting up your system. USB allows you to connect a chain of up to
120 devices on a single USB port; and you can "hot" plug (attach them while
the computer is running) or unplug them while maintaining the Plug and the
Plug auto detection and configuration. This display has an integrated BUSpowered USB hub, allowing up to 2 other USB devices to be attached it.
USB
USB connection
1.
2.
Connect the upstream port of the display to the downstream port of the USB
compliant PC or another hub using the USB cable. (Computer must have a
USB port)
Connect the USB compliant peripherals to the downstream ports of the
display.
USB
upstream
This is
Port
simplified
representation
of
rear
a
view.
To USB downstream port of
the USB compliant PC or
another hub cable
PUSH
USB downstream Port
connect the cables from
USB
Power
compliant
peripherals-such as
keyboard, mouse, etc
ON/OFF
Switch of the monitor
NOTE
To activate the USB hub function, the display must be connected to
or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the
matches the shape at the connecting side.
shape
a
USB
compliant PC(OS)
of the connector at the cable side
Even if the display is in a power saving mode, USB compliant devices will function when
are connected the USB ports(both the upstream and downstream) of the display.
A21
they
Making
use
USB
of USB
(Universal
Serial
Bus) Optional
-
Specifications
USB standard
Rev. 1.1
Downstream power supply
500mA for each (MAX)
Communication speed
12
USB
1
port
complied BUS-powered hub
Mbps (full),
1.5
Mbps (low)
Upstream port
2 Downstream ports
IMPORTANT: These USB connectors
such
are
not
designed
video camera, scanner, etc. LGE recommends
to the computer
as a
directly
for
A22
with
high-power
connecting high-power
use
USB devices
USB devices
Digitally yours
Download PDF

advertising