LG | L2000C-SF | LG L2000C-SF Owner’s Manual

User's Guide
L2000C
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
on
the product and
dealer when you ask for service.
give the information to your
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the power cord supplied
cord, make
that it is certified
sure
with the unit. In
by
the
you use another power
national standards if not being
case
applicable
If the power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
provided by the supplier.
manufacturer
or
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
or listed on the display. If you are not sure what type of power supply
this manual
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
technician for
plugs. They
replacement.
Do not
the
Open
may result in
are
a
dangerous. So
shock
or
are frayed power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the power
Contact your dealer if the display is not operating properly.
is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
only a stand recommended by the manufacturer.
Do not
Use
To Prevent Fire
or
Hazards:
display OFF if you leave the room for more than a short period
display ON when leaving the house.
children
from
Keep
dropping or pushing objects into the display's cabinet
Some
internal
openings.
parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Always
turn the
of time. Never leave the
A1
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
a
near
wet
water such as near a
basement,
Displays are provided with ventilation
generated during operation. If
of heat
place
bathtub, washbowl, kitchen
swimming pool.
openings in the cabinet to allow the release
these openings are blocked, built-up heat
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
can cause
Do not rub
mar, or
or
strike the Active Matrix LCD with anything hard
the Active Matrix LCD permanently.
Do not press the LCD
some
as
this may scratch,
damage
screen
with your
finger for a long
time
as
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connecting
the
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1.
Place the monitor with its front
2. Align
3.
the hooks
on
base
facing
Removing the stand
or
downward
the stand base with the
on a
matching
cushion
or
base
soft cloth.
slots in the base of the monitor.
Insert the hooks into slots.
Warning:
The tape and
with
locking pin may only be removed from those monitors
a standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
equipped
Hook
Slot
4.
Use
a
coin
on
the back of the stand base and turn the
screw
clockwise to
tighten.
5. When
you desire to
coin to turn the
disintegrate the
screw
monitor from the stand base,
use a
counterclockwise.
Screw
10
0
10
0
Important
This illustration
depicts the general
picture.
model of connection. Your monitor may differ from
the items shown in the
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
fall and get
damaged
or
injure your foot.
A3
product
may
Connecting
the
Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position
Tilt
Range
:
of the
panel
in various ways for maximum comfort.
-5˚~25˚
Height Range
:
Swivel :350˚
maximun 3.15 inch
(80.0mm)
80.0mm
First, remove
the locking
pin.
Landscape
(*
& Portrait : You
For detailed information,
*
Make
can
please
sure
rotate the
panel
90 clockwise.
o
refer to the Pivot Sofeware CD
provided.)
not to touch the
floor when the head rotates
to
use
the Pivot function.
Ergonomic
It is recommended that in order to maintain
position,
the forward tilt
angle of the
an
ergonomic and comfortable viewing
degrees.
monitor should not exceed 5
A4
the
Connecting
Display
Using the Computer
1.
Place the monitor in
a convenient, well-ventilated location near your computer. To adjust
of your monitor, unlock the stand lock on top of the stand.
Connect the signal cable. When attached, tighten the thumbscrews to secure the
height
2.
connection. 1
3. Connect the power cord into a proper power outlet
to the
display.
that is
easily accessible
and close
2
Signal Cable
Power Cord
Digital signal Analog signal
DVI
D-sub
Varies according to model.
NOTE
This is
of the
This
a
simplified representation
rear
rear
Wall-outlet type
view.
view
represents
a
2
general model; your display
differ from the view
as
may
shown.
1
PC-outlet type
PC
PC
MAC
Mac adapter
For Apple Macintosh use,
a
separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
4.
Press
on.
button
on
the front switch
Setting Function' is
(Only Analog Mode)
NOTE
Self Image Setting
'
panel
to turn the power
When monitor power is turned on, the 'Self
executed
Function'? This function
Image
automatically.
optimal display settings.When the user
to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
connects the monitor for the first
provides the
user
with
time, this function automatically adjusts the display
'
A5
Control Panel Functions
Front Panel Controls
Control
Function
MENU Button
Use this button to enter
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
-
+
Buttons
Use these buttons to select
Screen
For
SOURCE hot
key
or
adjust functions
more
information, refer to page
Use this button to make D-Sub
This feature is used when two
to the
in the On
Display.
display.
The default
A6
or
A13.
DVI connector active.
computers
setting
are
is D-Sub.
connected
Control Panel Functions
Control
Function
AUTO/SET
Use this button to enter
Button
Display.
a
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best
display
20 inch monitor
:
mode is
1600x1200
Power Button
Use this button to turn the
Power Indicator
This Indicator
lights
display
on or
up blue when the
off.
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
to amber.
A7
this indicator color
changes
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display,
Press the MENU Button, then the main
To
access a
becomes
Use the
control,
use
highlighted,
the
making image adjustments.
follow these steps:
menu
of the OSD appears.
-+
or
Buttons. When the icon you want
press the AUTO/SET Button.
/ + Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
-
Push the MENU Button
once
to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A8
On Screen
The
and
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
setting menus.
Main
menu
PICTURE
Sub-menu
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
COLOR
PRESET
6500K
To customize the color of
9300K
the
screen
RED
GREEN
BLUE
POSITION
TRACKING
SETUP
HORIZONTAL
To
VERTICAL
screen
CLOCK
To
adjust the position
of the
PHASE
improve the clarity
stability of the screen
LANGUAGE
To customize the
screen
status for a user's
operating
OSD
HORIZONTAL
and
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
MOVIE / TEXT
FLATRON
F-ENGINE(
-
)
To select
USER
desired
or
customize
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A9
the model
(A9~A13).
On Screen
Selection and
Display(OSD)
Adjustment
were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
Press the MENU
Menu Name
Button, then the main menu of the OSD appears.
PICTURE
Sub-menus
Icons
Button
Tip
MENU
-+
SET
:
:
Exit
Adjust (Decrease/Increase)
:
Enter
:
Select another sub-menu
NOTE
OSD
(On
Screen
Display)
menu
languages
on
A10
the monitor may differ from the manual.
On Screen
Selection and
Display(OSD)
Main
menu
Sub
Adjustment
Description
menu
PICTURE
PICTURE
of the
BRIGHTNESS
To
adjust
the
CONTRAST
To
adjust
the contrast of the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
brightness
screen.
screen.
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
COLOR
COLOR
PRESET
?
?
?
sRGB: Set the screen color to fit the SRGB
standard color specification.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
RED
Set your
own
red color levels.
GREEN
Set your
own
green color levels.
Set your
own
blue color levels.
MENU : Exit
BLUE
: Decrease
+ : Increase
SET : Select another sub-menu
-
POSITION
POSITION
HORIZONTAL
To
move
image left
VERTICAL
To
move
image
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
A11
and
right.
up and down.
On Screen
Display(OSD)
Main
Selection and
Sub
menu
Adjustment
Description
menu
TRACKING
TRACKING
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
PHASE
To
adjust the focus of the display. This
item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
SETUP
LANGUAGE
To choose the
control
SETUP
OSD
POSITION
-
+
the
To
adjust position
on
the
of the OSD window
screen.
If the output of the video card is different
required specifications, the color
WHITE
BALANCE
MENU
language in which
displayed.
names are
the
level may deteriorate due to video
distortion. Using this function, the
SET
signal
signal
SETUP
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
MENU
-
MENU
-
:
+ :
SET
:
+
SET
Exit
POWER
INDICATOR
:
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
Adjust
Adjust
are
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
Select another sub-menu
FACTORY
on.
Restore all factory default settings except
"LANGUAGE."
Press the + button to reset immediately.
RESET
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A12
only when
On Screen
Display(OSD)
The OSD
A A A
screen
Selection and
Adjustment
will appear when you touch the
(-)
button
on
the
right
side of the monitor.
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not
applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
on
the left side, whereas the
non-applied
will appear on the right side.Touch the SET
button to use the adjusted screen.
screen
Main
Sub
menu
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation
TEXT: For text
USER
adjust the
USER sub-menu
function,
or
movies
User
can
You
can save or
...
Press the SET Button
...
USER
...
BRIGHTNESS
in videos
images (Word processing etc.)
You
when
To
images
manually adjust brightness, ACE or RCM.
restore the adjusted value even
using a different environment setting.
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
RCM(Real Color Management): Selects the color mode.
0
Not
1
Green enhance
ACE
1
RCM
applied
2
Flesh tone
3
Color Enhance
2
SAVE
MENU
SET
Select the SAVE sub-menu using the SET button
and save the YES value using the buttons.
NORMAL This is under normal
A13
operating
conditions.
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator blue or
Adjust the brightness
properly
see
if the power cord is connected
to the power outlet.
and the contrast.
green?
Is the power indicator
amber?
If the
the
display
mouse or
is in power
saving mode, try moving
pressing any key on the keyboard
bring up the screen.
Try to turn on the PC.
to
Do you see an "OUT
OF RANGE" message
on the screen?
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
Do you see a "CHECK
SIGNAL CABLE"
This message appears when the signal cable
between your PC and your display is not
message
screen?
Do you
on
the
see a
connected. Check the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
MENU button?
You
on
signal
cable and try
again.
the screen?
the current control
settings,
they
inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENU button for
so
can secure
that
cannot be
several seconds: the message
"OSD UNLOCKED" will appear.
A14
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon
the on screen display.
in
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
Make
sure
the video card is
properly
inserted in
the slot.
Set the color
color)
The
screen
blinks.
setting higher than 24
Settings.
at Control Panel
Check if the
screen
bits
(true
-
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be
A15
higher than
AC100-240V 50/60Hz.
Troubleshooting
Have you installed the
Have you installed the
display driver?
driver?
display
Be
sure
to install the
driver CD
display
your display. Or, you
driver from
Do you
see an
"Unrecognized monitor,
display driver from the
(or diskette) that comes with
Make
sure
Plug&Play
Plug&Play (VESA DDC)
monitor found"
message?
A16
our
can
web site:
also download the
http://www.lge.com.
to check if the video card
function.
supports
Specifications
20.1 inches
Display
Flat Panel Active matrix-TFT LCD
(51.0cm)
Anti-Glare coating
20.1 inches viewable
0.255mm pixel pitch
Horizontal
Sync Input
Freq.
Analog : 28 83kHz (Automatic)
Digital : 28 83kHz (Automatic)
56 85Hz (Automatic)
Separate TTL, Positive/Negative
Composite TTL Positive/Negative
SOG (Sync On Green)
Digital
-
-
Vertical
Input
Video
Input
Freq.
Form
-
Input Form
pin D-Sub Connector
D connector (Digital)
RGB Analog (0.7Vp-p/75ohm), Digital
Max
D-Sub
Signal Input
15
DVI
Resolution
Plug&Play
DDC 2B
Power
On Mode
Mode
Off Mode
Width
Dimensions
&Weight
(with tilt/ swivel
stand)
Tilt/Swivel
Range
Sleep
Environmental
Conditions
:
Analog
-
Digital VESA 1600
-
58W
≤1W
/ 17.56 inches
44.78
cm
/ 17.62
52.78
cm
/ 20.76
Depth
24.26
cm
/ 9.55 inches
Net
7.6
Tilt range
Swivel range
-5˚~25˚
350˚
Height
range
x
≤1W
cm
Height
Input
:
:
44.60
Rotate
Power
VESA 1600
x 1200@60Hz
1200@60Hz
Recommend VESA 1600 x 1200@60Hz
DVI
Consumption
-
inches(Min)
inches(Max)
kg
80mm / 3.15 inches
90˚clockwise(Landscape
->
Portrait)
AC 100-240V~50/60Hz 1.2A
Operating Conditions
10˚C to 35 ˚C
Temperature
Humidity
10 % to 80 % non-Condensing
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 95 % non-Condensing
Humidity
A17
Specifications
Tilt/Swivel Stand
Attached(
),
Detached
(O)
Signal cable
Attached(
),
Detached
(O)
Power cord
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject
to
change without
A18
notice.
Specifications
Preset Modes
(Resolution)
Display Modes (Resolution)
Horizontal
Freq. (kHz)
Vertical
Freq. (Hz)
1
640
x
350
31.47
70
2
640
x
480
31.47
60
3
640
x
480
37.50
75
4
640
x
480
43.27
85
5
720
x
400
31.47
70
6
800
x
600
37.88
60
7
800
x
600
46.88
75
8
800
x
600
53.67
85
9
832
x
624
49.72
75
60
10
1024
x
768
48.36
11
1024
x
768
60.02
75
12
1024
x
768
68.68
85
13
1152
x
870
68.68
75
14
1152
x
900
61.80
65.96
15
1280
x
1024
63.98
60.02
16
1280
x
1024
79.98
75.02
17
1600
x
1024
62.11
60
*18
1600
x
1200
75.0
60
**19
1600
x
1200
73.53
60
*Recommend Mode
**Digital Mode
Indicator
MODE
On Mode
Sleep
Mode
Off Mode
LED Color
Blue
Amber
Off
A19
Specifications
Connector Pin
Signal
1
8
9
16
17
24
Assignment
DVI-D Connector
Pin
Pin
Signal(DVI-D)
1
T. M. D. S. Data2-
Signal(DVI-D)
16
Hot
2
T. M. D. S. Data2+
17
T. M. D. S. Data0-
3
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
4
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
5
T. M. D. S. Data4+
20
T. M. D. S. Data5-
6
DDC Clock
21
T. M. D. S. Data5+
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock-
7
DDC Data
8
Analog
9
T. M. D. S. Data1-
10
T. M. D. S. Data1+
11
T. M. D. S. Data1/3 Shield
12
T. M. D. S. Data3-
13
T. M. D. S. Data3+
14
+5V Power
15
Ground (return for +5V,
H. Sync. and V. Sync.)
T. M. D. S.
Vertical
(Transition
Sync.
Minimized Differential
A20
Signaling)
Plug
Detect
How to Install the VESA Standard wall
This monitor meets
mounting
VESA-compliant mounting
interface
pad
specifications.
VESA wall
mounting
Connected to another
object (stand type
and wall-
mounted type. This monitor accepts a VESAcompliant mounting interface pad.- optional)
For further
Mounting
information, refer to the
VESA Wall
Instruction Guide.
Kensington Security Slot- optional
a locking
cable that can be purchased
separately at most
Connected to
computer
A21
stores
Digitally yours
Download PDF