LG | L2012P | LG L2012P Owner’s Manual

User's Guide
L2012P
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the product and quote this information to your
require service.
This unit has been
engineered and manufactured to ensure your personal
safety, however improper use may result in potential e shock or fire hazards.
In order to allow the proper operation of all safeguards incorporated in this
display, observe the following basic rules for its installation, use, and
servicing.
On
Safety
power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
Use
only the
manufacturer
or
the nearest authorized
repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
There
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
are no user
To Avoid Personal
Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
near water
a wet
such
basement,
as near a
or near a
place
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
can cause
strike the Active Matrix LCD with anything hard
damage the Active Matrix LCD permanently.
Do not rub
mar, or
or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
the
Connecting
Before
Display
setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Connecting
the stand base
or
Removing
the stand base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2. Align the hooks on the stand base with the matching slots in the base of
the monitor.
3.
Insert the hooks into slots.
Warning:
The tape and locking pin may only be removed from those
monitors equipped with a standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
Hook
Slot
4.
Use
a
coin
on
the back of the stand base and turn the
screw
clockwise to
tighten.
5.
When you desire to disintegrate the monitor from the stand base,
coin to turn the screw counterclockwise.
use a
Screw
100
100
Important
This illustration
the items
depicts the general
shown in the picture.
model of connection. Your monitor may differ from
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
fall and get
damaged
or
injure your foot.
A3
product
may
the
Connecting
Display
Positioning your display
Adjust the position of the panel
Tilt
in various ways for maximum comfort.
Range : -5˚~20˚
Height Range
:
Swivel : 350˚
maximun 3.15 inch (80.0mm)
80.0mm
Remove the
locking pin behind
the stand and
adjust the height.
Landscape
& Portrait : You
can rotate
(* For detailed information, please refer
*
Make
sure
the
panel 90o clockwise.
to the Pivot Sofeware CD
provided.)
not to touch the
floor when the head rotates
to
use
the Pivot function.
Ergonomic
ergonomic and comfortable viewing
monitor should not exceed 5 degrees.
It is recommended that in order to maintain
position,
the forward tilt
angle of the
an
A4
Connecting
Using
1.
2.
the
the
Display
Computer
Place the monitor in
convenient, well-ventilated location near your computer.
To adjust height of your monitor, unlock the stand lock on top of the stand.
Connect the signal cable. When attached, tighten the thumbscrews to secure
a
the connection.
3. Connect the power cord into a proper power outlet
that is
easily accessible and close to the display.
Power Cord
Signal Cable
Digital signal Analog signal
DVI-D
D-sub
Varies according to model.
Wall-outlet type
2
1
PC-outlet type
PC
When
connecting
DVI
PC
When
connecting
D-sub
signal
cable
signal
cable
MAC
Mac adapter
For Apple Macintosh use,
separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
a
NOTE
simplified representation of the rear view.
This rear view represents a general model; your display
This is
a
A5
may differ from the view
as
shown.
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the
Power Indicator
This Indicator
display
on or
off.
lights up green when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.
SELECT Button
Buttons
Use this button to enter
a
selection in the On Screen
Display.
Use these buttons to choose
the On Screen
A6
Display.
or
adjust
items in
Control Panel Functions
Control
MENU Button
Function
Use this button to enter
exit the On Screen
or
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for 5 seconds. The
message "OSD LOCKED" should appear.
You
unlock the OSD controls at any time by pushing
the MENU button for 5 seconds. The message "OSD
can
UNLOCKED" should appear.
SOURCE
SOURCE hot
Button
Use this button to make D-sub
key
This feature is used when two
to the
The default
display.
or
DVI connector active.
computers
setting
AUTO
AUTO IMAGE ADJUSTMENT
Button
When
are
connected
is D-sub.
adjusting
your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). This will automatically adjust your
display image
screen
resolution size
The best
display
20 inch monitor
For
more
settings for the
(display mode).
to the ideal
:
mode is
1600x1200
information, refer
A7
to page A12
current
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display, follow these steps:
Press the MENU Button, then the main
To
access a
becomes
control,
highlighted,
Use the
menu
of the OSD appears.
Buttons. When the icon you want
press the SELECT Button.
use
the
making image adjustments.
or
Buttons to
adjust the item
to the desired level.
Accept the changes by pressing the MENU Button.
Exit the OSD
by Pressing the MENU Button.
A8
On Screen
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
and setting menus.
The
Main
Sub-menu
menu
PICTURE
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
PRESET
COLOR
6500K
To customize the color of
9300K
the
screen
RED
GREEN
BLUE
POSITION
TRACKING
SETUP
HORIZONTAL
To
VERTICAL
screen
CLOCK
To
adjust the position
of the
PHASE
improve the clarity
stability of the screen
LANGUAGE
To customize the
screen
status for a user's
operating
OSD
HORIZONTAL
and
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
MOVIE / TEXT
FLATRON
F-ENGINE(
-
)
To select
USER
desired
or
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A9
customize
the model (A9~A12).
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
NOTE
OSD (On Screen
Display)
menu
languages
adjust the brightness and
To
OSD
on
the monitor may differ from the manual.
contrast of the
Adjust
screen
Description
BRIGHTNESS
PICTURE
To
adjust
the
brightness
of the
screen.
CONTRAST
To
adjust
the contrast of the
screen.
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
MENU
To customize the color of the
OSD
screen
Adjust
Description
COLOR
PRESET
6500K/9300K
Select the screen color.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
?
?
RED
GREEN
Set your
own
color levels.
BLUE
MENU
To
adjust the position of the
OSD
screen
Adjust
Description
POSITION
Horizontal Position
To
move
image left
and
right.
Vertical Position
To
MENU
A10
move
image
up and down.
On Screen
To
Display(OSD)
improve
OSD
the
Selection and
clarity
and
stability
Adjust
Adjustment
of the
screen
Description
TRACKING
CLOCK
To minimize any vertical bars or
stripes visible on the screen
background.The horizontal screen
size will also change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU
To customize the
OSD
screen
status for
a
user's
Adjust
operating environment
Description
LANGUAGE
To choose the
control
OSD POSITION
WHITE
BALANCE
names
language in which
are displayed.
To
adjust position
on
the
the
of the OSD window
screen.
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
are
present in the
screen.
Use this function to set the power
INDICATOR indicator on the front side of the monitor
POWER
to ON
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
FACTORY
RESET
If this does not
on.
Restore all factory default settings except
"LANGUAGE."
Press the
button to reset immediately.
improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
only when the input signal is an analog signal.
A11
On Screen
Display(OSD)
The OSD
screen
right side
of the monitor.
Selection and
Adjustment
will appear when you touch the
(-)
button
on
the
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not
applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
screen
the left side, whereas the non-applied
will appear on the right side.Touch the
on
SETbutton to
Main
the
use
adjusted
menu
screen.
Sub
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE For animation
TEXT For text
USER
images
in videos
or
movies
images (Word processing etc.)
User
You
manually adjust brightness, ACE or RCM.
You can save or restore the adjusted value even
when using a different environment setting.
To
adjust the USER sub-menu function,
Press the SET Button
can
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer) Selects the clarity mode.
RCM(Real Color Management) Selects the color mode.
0
Not
1
Green enhance
2
Flesh tone
3
Color Enhance
applied
Select the SAVE sub-menu using the SET
button and save the YES value using the
buttons.
NORMAL This is under normal
A12
operating
conditions.
-
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator blue or
Adjust the brightness
properly
if the power cord is connected
to the power outlet.
see
and the contrast.
green?
Is the power indicator
amber?
If the
the
is in power saving mode, try moving
or pressing any key on the keyboard
display
mouse
bring up the screen.
Try to turn on the PC.
to
Do you see an "OUT
OF RANGE" message
on
the screen?
Do you see a "CHECK
SIGNAL CABLE"
message
screen?
Do you
on
the
see a
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
MENU button?
You
can secure
and try
again.
the screen?
the current control
settings,
inadvertently
they cannot be
changed. You can unlock the OSD controls
at any time by pushing the MENU button for
so
that
on
signal cable
5 seconds: the message
"OSD UNLOCKED" will appear.
A13
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO button to
automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the AUTO button to
automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Press the AUTO button to
automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
signal cable
is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
and
use a
the slot.
Set the color
setting higher than 24
color) at Control Panel Settings.
bits
(true
-
The
screen
blinks.
Check if the
screen
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be higher than AC100-240V 50/60Hz.
A14
Troubleshooting
Have you installed the
driver?
display
Have you installed the
display driver?
display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Do you
Make
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
Be
sure
to install the
sure
to check if the video card
Plug&Play function.
monitor found"
message?
A15
supports
Specifications
20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
20.1 inches viewable
0.255mm
pixel pitch
Horizontal
Sync Input
Freq.
83kHz (Automatic)
Analog
Digital : 28 83kHz (Automatic)
:
28
-
-
Vertical
Video
Input
56
Freq.
85Hz (Automatic)
-
Input Form
Separate TTL, Positive/Negative
Composite TTL Positive/Negative
SOG (Sync On Green)
Digital
Signal Input
pin D-Sub Connector
DVI D connector (Digital)
RGB Analog (0.7Vp-p/75ohm), Digital
15
-
Input Form
D-Sub : Analog VESA 1600 x 1200@60Hz
DVI : Digital VESA 1600 x 1200@60Hz
Recommend VESA 1600 x 1200@60Hz
Max
Resolution
-
-
Plug&Play
DDC 2B
Power
On Mode
Sleep Mode
Off Mode
Width
≤ 58W
44.60
cm
Height
44.83
cm
Consumption
Dimensions
&Weight
(with tilt/ swivel
stand)
Tilt/Swivel
Range
≤2W
≤1W
Depth
/ 17.64 inches(Min)
52.83 cm / 20.79 inches(Max)
24.26 cm / 9.55 inches
Net
8.88
Tilt range
Swivel range
-5˚~20˚
350˚
80mm / 3.15 inches
Height
range
Rotate
Power
Input
Environmental
Conditions
/ 17.56 inches
AC 100-240V
kg
90˚clockwise(Landscape
->
Portrait)
50/60Hz 1.2A
~
Operating Conditions
10˚C
Temperature
to 35 ˚C
10 % to 80 % non-Condensing
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 95 % non-Condensing
Humidity
Humidity
A16
Specifications
Tilt/Swivel Stand
Attached(
), Detached ( O )
Signal cable
Attached(
), Detached ( O )
Power cord
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A17
notice.
Preset Modes
123456789
(Resolution)
640
x
350
31.47
70
640
x
480
31.47
60
640
x
480
37.50
75
640
x
480
43.27
85
720
x
400
31.47
70
800
x
600
37.88
60
800
x
600
46.88
75
800
x
600
53.67
85
832
x
624
49.72
75
10
1024
x
768
48.36
60
11
1024
x
768
60.02
75
12
1024
x
768
68.68
85
13
1152
x
870
68.68
75
14
1152
x
900
61.80
65.96
15
1280
x
1024
63.98
60.02
16
1280
x
1024
79.98
75.02
17
1600
x
1024
62.11
60
*18
1600
x
1200
75.00
60
*Recommend Mode
Indicator
On Mode
Green
Sleep Mode
Amber
Off Mode
Off
Specifications
This monitor meets
VESA-compliant mounting
interface
pad
specifications.
VESA wall
mounting
Connected to another
and wall-
object (stand type
mounted type. This monitor accepts a VESAcompliant mounting interface pad.- optional)
For further
Mounting
information, refer
to the VESA Wall
Instruction Guide.
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased
separately at most
computer
A19
stores
Digitally yours
Download PDF

advertising