LG | L204WT-SF | LG L204WT-SF Owner’s Manual

User's Guide
L194WT
L204WT
L194WTM
L204WTM
L194WTQ
L204WTQ
L194WTX
L204WTX
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
on
the
product and give the information to your
dealer when you ask for service.
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the power cord supplied
with the unit. In
case
you
use
another power
by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
cord, make
sure
that it is certified
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
or listed on the display. If you are not sure what type of power supply
this manual
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They may
replacement.
technician for
Do not
Open
the
result in
are
a
dangerous. So
shock
or
are frayed power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the power
Contact your dealer if the display is not operating properly.
is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
only a stand recommended by the manufacturer.
Do not
Use
To Prevent Fire
or
Hazards:
display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Always turn
the
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
near
a wet
water such as near a
basement,
Displays are provided with ventilation
generated during operation. If
of heat
place
bathtub, washbowl, kitchen
swimming pool.
openings in the cabinet to allow the release
these openings are blocked, built-up heat
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
can cause
Do not rub
mar, or
or
strike the Active Matrix LCD with anything hard
Active Matrix LCD permanently.
Do not press the LCD
some
as
this may scratch,
damage the
screen
with your
finger for a long
time
as
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connecting
the
speakers
-
The feature is
only
for
speaker
models
-
L194WTM, L204WTM
Connecting the speaker
1.
2.
Place the monitor with its front
facing
Insert the
speaker in the direction
protruding
hook of the
downward
on a
soft cloth.
of the slot in the back of the
product.
Slot
Hook
Audio DC-In
Cable
3.
After
setting
up the
speaker,
connect the Audio DC-In Cable to the back of the
product.
20.1 inch monitor
19 inch monitor
A3
Connecting
Before
the
Display
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1.
Place the monitor with its front
2.
Assemble the Stand
Make sure you
facing
downward
Body into the product
push it until you hear it "click".
on a
soft cloth.
in the correct direction
as
shown in the
picture.
R
A
E
R
3.
4.
Assemble the Stand
Base(Front, Rear)
Once assembled take the monitor up
into the Stand
carefully
R
A
E
R
Body
in the correct direction.
and face the front side
REA
R
F
RON
T
REA
R
FRONT
Important
This illustration
depicts the general
picture.
model of connection. Your monitor may differ from
the items shown in the
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
fall and
get damaged
or
injure your foot.
A4
product
may
Connecting
Before
the
Display
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position
Tilt
Range
:
of the
panel
in various ways for maximum comfort.
-5˚~20˚
20
Warning:
When
adjusting
the
angle
of the screen, do not
put your finger(s) in between the head of the
monitor and the stand
You
body.
can
hurt your
finger(s).
Ergonomic
It is recommended that in order to maintain
position,
the forward tilt
angle of the
an
ergonomic and comfortable viewing
degrees.
monitor should not exceed 5
A5
Connecting
the
Display
Using the Computer
1. Place the monitor in a convenient, well-ventilated location near your computer.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection. 1
3. Connect the power cord into a proper power outlet
the
display.
that is
easily accessible
and close to
2
19 inch monitor
Signal
Power Cord
NOTE
This is
of the
This
Analog signal Digital signal
D-sub
a
Cable
DVI
simplified representation
rear
rear
view.
view
represents a
general model; your display may
differ from the view
as
shown.
Varies according to model.
Wall-outlet type
2
1
PC-outlet type
PC
MAC
Mac adapter
For Apple Macintosh use,
a separate plug adapter is needed
high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
to change the 15 pin
PC
DVI-D(This feature is not available in all countries.)
A6
Connecting
the
Display
20.1 inch monitor
Signal
Cable
Power Cord
Analog signal Digital signal
D-sub
DVI
Varies according to model.
Wall-outlet type
NOTE
This is
of the
This
a
2
simplified representation
rear
rear
view.
view
represents a
1
general model; your display may
differ from the view as shown.
PC-outlet type
PC
DVI-D(This feature is not available in all countries.)
PC
MAC
Mac adapter
For Apple Macintosh use,
a
separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
4.
Press
button
on
the front switch
panel
to turn the power
When monitor power is turned on, the 'Self
Function' is executed
on.
Image Setting
automatically.
(Only Analog Mode)
NOTE
Self Image Setting
'
Function'? This function
connects the monitor for the first
provides the
user
with
optimal display settings.When the
If you want to adjust the monitor while in use, or wish to manually run this function once
'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the Factory reset'
input signals.
again, push the
option on the
items except 'Language'.
'
OSD
adjustment
menu.
user
time, this function automatically adjusts the display to optimal settings for individual
However, be
aware
that this
option
A7
initializes all the
menu
Using
the
speakers
-
The feature is
only
for
speaker
models
-
L194WTM, L204WTM
Side Jack
Headphone/Earphone Input
Automatically mutes the speaker volume
when the headphones are plugged in.
Rear
Audio
Input
Connects to the *LINE OUT
jack
of the
PC sound card.
*LINE OUT
AUDIO
IN
A terminal used to connect to the
speaker including a built-in amplifier
(Amp). Make sure that the connecting
terminal of the PC sound card is checked
before
connecting. If the Audio Out
only Speaker Out,
of PC
sound card has
reduce the PC volume.
If the Audio Out of the PC sound card
supports both Speaker Out and Line Out,
convert to Line Out
using the card
(Refer to the
of the program
Sound Card Manual).
jumper
Speaker Out
*Line Out
<Jack of the PC sound card>
A8
Control Panel Functions
Back
Front Panel Controls
Control
Function
Use this button to enter
MENU Button
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
Buttons
For
:
SOURCE Hot
Use these buttons to select
Screen
key
or
adjust functions
more
information, refer to page A16.
Use this button to make D-Sub
This feature is used when two
to the
in the On
Display.
display.
The default
A9
or
DVI connector active.
computers
setting
are
is D-Sub.
connected
Control Panel Functions
Control
Function
AUTO/SET
Use this button to enter
Button
Display.
selection in the On Screen
a
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best
mode is
display
19 inch monitor
:
1440
20.1 inch monitor
:
x
1680
900
x
Power Button
Use this button to turn the
Power Indicator
This Indicator
lights
1050
display
on or
up blue when the
off.
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
to amber.
A10
this indicator color
changes
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display,
Press the MENU Button, then the main
To
access a
becomes
Use the
control,
use
the
highlighted, press
/
making image adjustments.
follow these steps:
menu
of the OSD appears.
Buttons. When the icon you want
or
the AUTO/SET Button.
Buttons to
adjust
the
image
to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Button
once
to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A11
On Screen
The
and
Display(OSD) Selection
and
Adjustment
following table indicates all the On Screen Display control, adjustment,
setting menus.
Main
menu
PICTURE
Sub-menu
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
COLOR
sRGB
PRESET
To customize the color of
6500K
the
screen
9300K
RED
GREEN
BLUE
To
HORIZONTAL
POSITION
adjust the position
of the
screen
VERTICAL
CLOCK
To
TRACKING
improve the clarity and
stability of the screen
PHASE
SHAPNESS
SETUP
LANGUAGE
OSD
HORIZONTAL
To customize the
screen
status for
operating
a
user's
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
FLATRON
MOVIE / TEXT
F-ENGINE
USER
To select
desired
or
customize
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A12
the model
(A12~A16).
On Screen
You
Display(OSD) Selection
were
introduced to the
and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU
Menu Name
Button, then the main menu of the OSD appears.
PICTURE
Sub-menus
Icons
Button
Tip
MENU
:
:
SET
Exit
Adjust (Decrease/Increase)
:
Enter
:
Select another sub-menu
NOTE
OSD
(On
Screen
Display)
menu
languages on
A13
the monitor may differ from the manual.
On Screen
Display(OSD) Selection
Main
menu
Sub
and
Adjustment
Description
menu
PICTURE
PICTURE
BRIGHTNESS
To
adjust
the
of the
CONTRAST
To
adjust
the contrast of the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
brightness
screen.
screen.
display whitish images and low gamma
display high contrast images.
values
MENU
:
:
:
SET
:
Exit
Decrease
Increase
Select another sub-menu
COLOR
PRESET
COLOR
?
sRGB: Set the
screen
color to fit the
SRGB standard color
?
?
specification.
Slightly reddish white.
9300K: Slightly bluish white.
6500K:
RED
Set your
own
red color levels.
Set your
own
green color levels.
Set your
own
blue color levels.
GREEN
MENU
:
:
:
SET
:
Exit
BLUE
Decrease
Increase
Select another sub-menu
POSITION
POSITION
MENU
:
:
:
SET
:
HORIZONTAL
To
move
image
left and
VERTICAL
To
move
image
up and down.
Exit
Decrease
Increase
Select another sub-menu
A14
right.
On Screen
Display(OSD) Selection
Main
menu
Sub
and
Adjustment
Description
menu
TRACKING
CLOCK
TRACKING
To minimize any vertical bars or stripes
on the screen background.
visible
The horizontal
screen
size will also
change.
To
PHASE
adjust
the focus of the
display.
This item allows you to remove any
horizontal noise and clear or sharpen
MENU
:
:
:
SET
:
the image of characters.
Exit
Decrease
Increase
SHARPNESS To adjust the clearness of the
Select another sub-menu
SETUP
LANGUAGE
To choose the
control
screen.
language in which
displayed.
the
names are
SETUP
OSD
POSITION
To
adjust position
on
the
If the
WHITE
BALANCE
the
of the OSD window
screen.
output of the video card is different
required specifications,
the color
level may deteriorate due to video
signal distortion. Using this function, the
SETUP
signal
level is
standard
adjusted
to fit into the
output level of the video card
in order to
provide
the
optimal image.
Activate this function when white and
black colors
POWER
MENU
:
Exit
:
Adjust
Adjust
:
SET
:
INDICATOR
are
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
Select another sub-menu
FACTORY
Restore all factory default
"LANGUAGE."
RESET
Press the
settings except
button to reset
immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A15
on.
only when
On Screen
Display(OSD) Selection
The OSD
on
the
screen
right
and
Adjustment
will appear when you touch the
button
side of the monitor.
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not
applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
on
the left
side, whereas the non-applied
will appear on the right side.Touch the SET
button to use the adjusted screen.
screen
Main
Sub
menu
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation
TEXT: For text
USER
adjust the
USER sub-menu
function,
in videos
or
movies
images (Word processing etc.)
User
You
can
You
can save or
when
To
images
...
Press the SET Button
...
...
manually adjust brightness, ACE or RCM.
restore the adjusted value even
using a different envir
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
RCM(Real Color Management): Selects the color mode.
Select the
and
save
SAVE
0
Not
1
Green enhance
2
Flesh tone
3
Color Enhance
sub-menu
the YES value
NORMAL This is under normal
A16
applied
using the SET button
using the buttons.
operating
conditions.
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
?
display connected?
Check and
properly to
see if the power cord is connected
the power outlet.
Is the power indicator
light on?
?
Press the Power button.
Is the power on and the
power indicator blue or
?
Adjust the brightness
and the contrast.
green?
Is the power indicator
amber?
?
If the
the
display
mouse or
is in power
pressing
saving mode, try moving
key on the keyboard to
any
bring up the screen.
?TrytoturnonthePC.
Doyouseean"OUTOF
RANGE" message
the screen?
on
Do you see a "CHECK
SIGNAL CABLE"
message
screen?
Do you
on
see a
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
?
This message appears when the signal cable
between your PC and your display is not
connected. Check the
the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
?
MENU button?
?
You
so
can secure
that
You
they
can
signal
on
cable and
try again.
the screen?
the current control
cannot be
settings,
inadvertently changed.
unlock the OSD controls at any time
the MENU button for several
by pushing
seconds: the message
"OSD UNLOCKED" will appear.
A17
Troubleshooting
Display image
Display
is incorrect
Position is
?
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
?
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon
the on screen display.
incorrect.
On the
screen
vertical
background,
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
?
?
in
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check Control Panel
resolution
were
Display --> Settings and see if the frequency or the
changed. If yes, readjust the video card to the recommend
-->
resolution.
The
setting
method
can
differ
by computer and
O/S
(Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
A18
Troubleshooting
Display image
The
screen
mono or
is incorrect
color is
?
abnormal.
Check if the
and
?
signal
cable is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
use a
the slot.
?
Set the color
setting higher than
Settings.
at Control Panel
The
screen
blinks.
?
Check if the
24 bits
(true color)
-
screen
is set to interlace mode and if
yes, change it to the recommend resolution.
?
Make sure the power voltage is high enough, It
Have you installed the
Have you installed the
display driver?
?
has to be
higher than
display
driver?
Be
display driver from the display
(or diskette) that comes with your
sure
AC100-240V 50/60Hz.
to install the
driver CD
you can also download the driver from
web site: http://www.lge.com.
display. Or,
our
Doyouseean
"Unrecognized monitor,
Plug&Play (VESA DDC)
?
Make
sure
Plug&Play
monitor found"
message?
A19
to check if the video card
function.
supports
Specifications
Display
L194WT/L194WTQ/L194WTX
19 inches
Anti-Glare
Flat Panel Active matrix-TFT LCD
(48.2 cm)
coating
19 inches viewable
0.2835
Sync Input
Horizontal
Vertical
Input
pixel pitch
mm
Analog : 30
Digital : 30
Freq.
83 kHz
(Automatic)
(Automatic)
56 75 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Freq.
-
-
83 kHz
-
Form
Digital
Video
Input
15
Signal Input
pin
DVI
Input
Resolution
Form
RGB
D-Sub Connector
D connector
(Digital)
Analog (0.7 Vp-p/ 75 ohm), Digital
Max
Analog : VESA 1440 x 900 @75 Hz
Digital : VESA 1440 x 900 @60 Hz
Recommend
VESA 1440
Plug&Play
DDC 2B
Power
0n Mode
Consumption
Sleep
34
:
Mode
x
900 @60 Hz
W(Typ.)
≤1W
Off Mode
≤1W
With Stand
Dimensions
&Weight
-
Without Stand
Width
43.48
cm
/ 17.11 inches
43.48
cm
/ 17.11 inches
Height
Depth
36.99
cm
/ 14.56 inches
28.73
cm
/ 11.31 inches
22.60
cm
/
5.87
cm
/
8.89 inches
2.31 inches
Net
3.6
Tilt Range
Tilt
-5˚~20˚
Power Input
AC 100-240V~50/60Hz 0.8A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Conditions
Storage
Temperature -20˚C to 60 ˚C
5 % to 90 % non-Condensing
Humidity
Stand Base
Attached
(
),
Detached
(
O
)
Signal cable
Attached
(
),
Detached
(
O
)
Power cord
Wall-outlet
type
or
kg (7.94 lbs)
PC-outlet
type
NOTE
Information in this document is
subject
to
change without
A20
notice.
Specifications
Display
L194WTM
19 inches
Anti-Glare
Flat Panel Active matrix-TFT LCD
(48.2 cm)
coating
19 inches viewable
0.2835
Sync Input
Horizontal
Vertical
Input
pixel pitch
mm
Analog : 30
Digital : 30
Freq.
83 kHz
(Automatic)
(Automatic)
56 75 Hz (Automatic)
Separate TTL, Positive/Negative
Freq.
-
-
83 kHz
-
Form
SOG (Sync On Green),Digital
Video
Input
15
Signal Input
Input
Resolution
Form
VESA 1440
Power
0n Mode
Sleep
(without speaker)
Off Mode
Input
Environmental
Conditions
VESA 1440
x
75
ohm), Digital
900 @75 Hz
900 @60 Hz
900 @60 Hz
W(Typ.)
≤1W
With Stand
Without Stand
Width
43.48
cm
/ 17.11 inches
43.48
Height
36.99
cm
/ 14.56 inches
Depth
22.60
cm
/
8.89 inches
Net
3.6
Tilt
-5˚~20˚
cm
/ 17.11 inches
28.73
cm
/ 11.31 inches
5.87
cm
/
2.31 inches
kg (7.94 lbs)
AC 100-240V~50/60Hz 0.8A
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Conditions
Storage
Temperature -20˚C to 60 ˚C
5 % to 90 %
Humidity
Stand Base
Attached
(
),
Detached
(
O
)
Signal cable
Attached
(
),
Detached
(
O
)
Power cord
Wall-outlet
Audio
x
x
≤1W
Dimensions
Power
VESA 1440
:
34
:
Mode
(Digital)
Analog (0.7 Vp-p/
Recommend
Consumption
Range
RGB
Analog
Digital :
DDC 2B
Tilt
D connector
-
Max
Plug&Play
&Weight
D-Sub Connector
pin
DVI
type
RMS Audio
or
PC-outlet
Output
Input Sensitivity
Speaker Impedance
non-Condensing
type
1W+1W(R+L)
0.7Vrms
16Ω
NOTE
Information in this document is
subject
to
change without
A21
notice.
Specifications
Display
L204WT/L204WTQ/L204WTX
20.1 inches
Flat Panel Active matrix-TFT LCD
(51.1 cm)
coating
Anti-Glare
20.1 inches viewable
0.258
Sync Input
mm
Vertical
Input
Video
Input
pixel pitch
Horizontal
Freq.
Analog
Digital
Freq.
15
Form
-
-
-
RGB
D connector
Recommend
VESA 1680
Power
0n Mode
Consumption
Sleep
VESA 1680
:
VESA 1680
x
x
x
75
ohm), Digital
1050 @ 60 Hz
1050 @ 60 Hz
1050 @60 Hz
45W(Typ.)
:
Mode
(Digital)
Analog (0.7 Vp-p/
Analog
Digital :
DDC 2B
83 kHz
D-Sub Connector
pin
Max
Plug&Play
≤1W
Off Mode
≤1W
With Stand
Dimensions
&Weight
30
-
Form
DVI
Resolution
83 kHz
(Automatic)
(Automatic)
56 75 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Signal Input
Input
30
:
:
Without Stand
Width
46.62
cm
/ 18.35 inches
46.62
cm
/ 18.35 inches
Height
Depth
38.40
cm
/ 15.11 inches
30.54
cm
/ 12.02 inches
22.60
cm
/
6.46
cm
/
8.89 inches
Net
4.8
Tilt Range
Tilt
-5˚~20˚
Power Input
AC 100-240V~50/60Hz 1.2A
Environmental
Conditions
Operating Conditions
Temperature 10˚C
kg (10.58 lbs)
to 35 ˚C
10 % to 80 %
Humidity
2.54 inches
non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 90 % non-Condensing
Humidity
Stand Base
Attached
(
),
Detached
(
O
)
Signal cable
Attached
(
),
Detached
(
O
)
Power cord
Wall-outlet
type
or
PC-outlet
type
NOTE
Information in this document is
subject
to
change without
A22
notice.
Specifications
Display
L204WTM
20.1 inches
Flat Panel Active matrix-TFT LCD
(51.1 cm)
coating
Anti-Glare
20.1 inches viewable
0.258
Sync Input
mm
pixel pitch
Horizontal
Freq.
Analog
Digital
Vertical Freq.
Input
56
Form
-
30
:
30
:
75 Hz
-
-
83 kHz
(Automatic)
(Automatic)
83 kHz
(Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Video
Input
15
Signal Input
DVI
Input
Resolution
Form
Recommend
VESA 1680
Power
0n Mode
Consumption
Sleep
(without speaker)
Off Mode
Power
Input
(Digital)
VESA 1680
:
VESA 1680
x
x
x
75
ohm), Digital
1050 @60 Hz
1050 @60 Hz
1050 @60 Hz
45W(Typ.)
:
Mode
≤1W
≤1W
With Stand
Dimensions
Range
D connector
Analog (0.7 Vp-p/
Analog
Digital :
DDC 2B
Tilt
RGB
Max
Plug&Play
&Weight
-
Digital
D-Sub Connector
pin
Without Stand
Width
46.62
cm
/ 18.35 inches
46.62
cm
/ 18.35 inches
Height
Depth
38.40
cm
/ 15.11 inches
30.54
cm
/ 12.02 inches
22.60
cm
/
6.46
cm
/
8.89 inches
Net
4.8
Tilt
-5˚~20˚
2.54 inches
kg (10.58 lbs)
AC 100-240V~50/60Hz 1.2A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 90 % non-Condensing
Humidity
Stand Base
Attached
Signal
cable
Power cord
Audio
Attached
(
(
Wall-outlet
),
Detached
),
Detached
type
RMS Audio
or
(
O
(
O
PC-outlet
Output
Input Sensitivity
Speaker Impedance
)
)
type
1W+1W(R+L)
0.7Vrms
16Ω
NOTE
Information in this document is
subject to change without
A23
notice.
Preset Modes
(Resolution)
19 inch monitor
70
1
640
x
350
31.469
2
720
x
400
31.468
70
3
640
x
480
31.469
60
4
640
x
480
37.500
75
5
800
x
600
37.879
60
6
800
x
600
46.875
75
7
832
x
624
49.725
75
8
1024
x
768
48.363
60
75
9
1024
x
768
60.123
10
1152
x
870
68.681
75
11
1152
x
900
61.805
65
60
12
1280
x
1024
63.981
13
1280
x
1024
79.976
75
14
1440
x
900
55.500
60
*15
**16
1440
x
900
55.935
60
1440
x
900
70.635
75
*Recommend Mode
**Only Analog
Mode
20.1 inch monitor
1
720
x
400
31.468
70
2
640
x
480
31.469
60
3
640
x
480
37.500
75
4
800
x
600
37.879
60
5
800
x
600
46.875
75
6
1024
x
768
48.363
60
7
1024
x
768
60.123
75
8
1152
x
864
67.500
75
63.981
60
9
1280
x
1024
10
1280
x
1024
79.976
75
*11
1680
x
1050
64.674
60
**12
1680
x
1050
65.290
60
*
**
Digital
Analog
Recommend Mode
Recommend Mode
Specifications
Indicator
LED Color
MODE
blue
On Mode
amber
Mode
Sleep
Off
Off Mode
Signal Connector
1
8
9
16
17
24
Pin
Assignment
DVI-D Connector
Pin
Pin
Signal(DVI-D)
1
T. M. D. S. Data2-
Signal(DVI-D)
16
Hot
2
T. M. D. S. Data2+
17
T. M. D. S. Data0-
3
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
4
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
5
T. M. D. S. Data4+
20
T. M. D. S. Data5-
6
DDC Clock
21
T. M. D. S. Data5+
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock-
7
DDC Data
8
Analog
9
T. M. D. S. Data1-
10
T. M. D. S. Data1+
11
T. M. D. S. Data1/3 Shield
12
T. M. D. S. Data3-
13
T. M. D. S. Data3+
14
+5V Power
15
Ground (return for +5V,
H. Sync. and V. Sync.)
T. M. D. S.
Vertical
(Transition
Sync.
Minimized Differential
A25
Signaling)
Plug
Detect
Installing
the Wall mount
plate
This monitor satisfies the
the
1.
2.
interchange
specifications of the
Place the monitor with its front
Hold the
body
Wall mount
plate
of the stand
facing
downward
shown in the
as
on a
image
1
soft cloth.
and bend
slightly to the
right.
3.
Pull the stand to the direction
as
shown in the
image
1
E
R
Install the Wall mount
2
to
separate.
2
R
A
4.
or
device.
plate.
Wall mount
plate(Separate purchase)
stand-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate
purchased.
This is
is
Kensington Security Slot
a locking
cable that can be purchased
separately at most
Connected to
computer
stores
A26
Digitally yours
Download PDF