LG | L4200TF | LG L4200TF Owner’s Manual

L3200T/L3700T/L4200T
User's Guide
Please read this manual carefully before
operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
http://www.lge.com
P/NO.
:
3828TUL103E(0502-REV00)
Printed in Korea
on
the back cover and quote this
information to your dealer when you
require service.
Blank
Page
0
Table of Contents
Installation
and
Connection
Precautions
Safety
A1
Accessories
Using
A4
the Remote Control
A5
To arrange cables in order
Connecting
the
-
A12
Optional
A13
Speakers Optional
-
Name and Function of the Parts
Connecting
the External Devices
to your PC
A15
Watching
the VCR/DVD
A17
Watching
the
HDTV(720p/1080i)
A18
Watching
the
DVD(480i)
Connecting
Connecting
Watching
Selection
and
Tracking
Selecting
How to
to
A19
DVI-D(HDCP)
from the
VCR/DVD/Set-top
A20
Box
the TV
A21
AV
A22
Connecting
Input
A14
A15~
and
dajust
Outputs
Adjusting
the
the Screen
OSD(On
Set/Selects the channel when
Screen
using
the
A23
Display)
Screen
A26
A27
TV(Optional)
Adjusting
Screen Color
A29
Adjusting
the audio function
A30
Adjusting
the timer function
A31
Selecting
the
A32
Adjusting
Screen CLOCK/PHASE and Position
Adjusting
PIP/POP/PBP Mode
Controlling
the
Options
Multiple
(Multiple Screen)
Products
A34
A35
Functions
A37
(RS-232C protocol)
A48
IR Codes
Miscellaneous
Troubleshooting
A50
Specifications
A53
is
a
trademark of SRS
technology
is
Labs,Inc.
incorporated
i
under license from SRS
Labs,Inc.
ENGLISH
Precautions
Safety
safety precautions carefully before using
Please read these
Warning
If you ignore the warning message, you may be
accident or death.
Caution
If you
ignore the caution
Precautions in
message, you may be
installing
seriously injured
or
the
there is
product.
a
possibility
of
slightly injured or the product may be damaged
the Product
Warning
Keep away from heat sources
-
Electrical
like electrical heaters.
shock, fire, malfunction
deformation may
or
vinyl packing out of the reach of children.
by mistake, force the patient to vomit and visit the
hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Keep the packing anti-moisture material
-
occur.
or
Anti-moisture material is harmful if swallowed. If swallowed
nearest
Do not
-
If the
put heavy objects on the product or sit upon it.
product collapses or is dropped, you may be injured.
Children must pay
particular attention.
Do not leave the power or signal cable unattended on the pathway.
The passerby can falter, which can cause electrical shock, fire, product breakdown
-
Install the
-
Dust
or
product
moisture
in
a
neat and
can cause
If you can smell smoke
service center.
-
If you continue to
use
If you dropped the
If you continue to
-
or
injury.
dry place.
electrical
shock, fire
other odors
without
or
taking
or
hear
or
a
product damage.
strange sound unplug the power cord and
proper measures, electrical shock
or
fire
contact the
can occur.
product or the case is broken, turn off the product and unplug the power cord.
use without taking proper measures, electrical shock or fire can occur. Contact the
service
center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable
objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and
-
contact the service center.
Caution
Make
sure
the
product ventilation
hole is not blocked. Install the
product in
a
suitably wide place (more
than 10cm from the wall)
-
If you install the
product too
close to the
wall, it may be deformed
Do not block the ventilation hole of the
-
The
product can
be deformed
or
fire
can
product by
a
tablecloth
break out due to
If the
fire
or
can
break out due to internal heat.
curtain.
overheating
inside the
product.
producton a flat and stable place that has no risk of dropping the product.
product is dropped, you may be injured or the product may be broken.
Install the
-
or
Install the
product where
no
EMI
occurs.
Keep the product away from direct sunlight.
The product can be damaged.
-
A1
Electrical Power Related Precautions
ENGLISH
Warning
Make
-
sure
to connect the power cable to the
You may be electrocuted
or
grounded
current.
injured.
Use the rated
-
The
voltage only.
product can be damaged,
During
-
a
thunder
or
or
you may be electrocuted.
lightning storm, unplug the power cable or signal
You may be electrocuted
or a
fire
can
Do not connect several extension
cable.
break out.
cords, electrical appliances
power bar with a grounding terminal designed for exclusive
A fire can break out due to overheating.
electrical heaters to
or
a
single outlet.
Use
with the computer.
use
-
Do not touch the power plug with wet hands. Additionally, it the cord
the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
pin
is wet
or
covered with
dust, dry
-
If you don't intend to use the product for a long time, unplug the power cable from the product.
Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
-
Fix the power cable completely.
If the power cable is not fixed completely,
-
Hold the
plug
heavy objects
-
on
The power line
Do not insert
a
fire
break out.
can
when
pulling out the power cable. Do not bend the power cord with excessive force
the power cord.
can
be
damaged, which
may
cause
electric shock
or
or
put
fire.
(like a metal chopstick) into one end of the power cable while the other end
input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
a
conductor
connected to the
-
You may be electrocuted.
Caution
Do not
-
unplug the power cord while the product
can damage the product.
is in
use.
Electrical shock
Precautions in
Moving
the Product
Warning
Make
-
Make
-
sure
to turn off the
You may be electrocuted
sure
to
remove
product.
or the product can
be
damaged.
all cables before
You may be electrocuted
or
the
moving the product.
product can be damaged.
A2
is
a
Precautions
Safety
Caution
Do not shock the
-
product when moving it.
or the product can
You may be electrocuted
Do not
dispose the
product-packing
be
damaged
box. Use it when you
move.
Make the
-
panel face forward and hold it with both hands to move.
drop the product, the damaged product can cause electric shock or fire.
repair.
If you
Precautions in
Using
Contact with the service center for
the Product
Warning
Do not
-
-
Fire
disassemble, repair or modify the product at your
or
electric shock accident
Contact the service center for
discretion.
own
can occur.
check, calibration
Do not spray water on the product
electric shock accident can occur
or
or
scrub with
repair.
an
inflammable substance
(thinner or benzene).
Fire
or
Keep the product away from water.
-
Fire
or
electric shock accident
can occur.
Caution
Do not
-
put
There is
a
or
store inflammable substances
danger of explosion or fire
the product.
handling of the
near
due careless
inflammable substances.
When
cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
The water can sink into the product, which can cause electric shock or serious malfunction.
-
Take
a
rest from time to time to
Keep the product clean
protect your vision.
at all times.
Take
a
comfortable and natural
Take
a
regular break when working with
Do not press
scratch on it.
position
when
a
strongly upon the panel with
working with
a
product to
relax the muscles.
product for a long time.
a
hand
or
sharp object such
as
nail, pencil
or
pen,
or
make
Keep proper distance from the product.
Your vision may be impaired if you look at the product too closely.
-
Set the
-
appropriate resolution
can be impaired.
Use authorized
-
and clock
by referring to the
User's Guide.
Your vision
Product
On
can
detergent only when cleaning the product. (Do
not
use
benzene, thinner or alcohol.)
be deformed.
Disposal
The fluorescent
lamp used in this product contains a small amount of mercury.
dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your
Do not
A3
local
authority.
a
Accessories
Please check the accessories in the
*
The
product
Desktop
and the accessories
Stand
product package.
be different from the
can
Free Mount
Type
figures
shown here.
ENGLISH
Type
OR
ON/ OFF
Product
Remote Control/
Batteries
User's Guide/
15-pin
Driver CD/Cards
D-Sub
DVI-D
Signal
Signal
Cable
Cable
Audio Cable
Power Cord
RCA-PC
(PC)
Audio Cable
Speaker
Optional
kit / Screws
(Applicable only
that support the
Wall-mount Rack
Please refer to the enclosed "Installation Guide" when
installing the wall-mount rack.
Inserting
batteries into remote control.
1. Take out the
battery cap.
2. Insert the
battery with
3. Close the
battery cap.
?
You
can use a
and 30
correct
polarity (+/-).
remote control 7 meter distance
degree (left/right)
within the
receiving
scope.
?
Dispose
of used batteries in the
prevent environmental pollution.
A4
recycle
bin to
unit
for models
speakers)
Using the
Remote Control
Name of the Remote Control Buttons
Remote Control
MUTE
POWER
MENU
Use this button to enter the On Screen
Display
menu.
EXIT
Use this button to exit the On Screen
*/SSM
(Sound
Status
Display menu.
Memory)
Use this button to select the sound tone.
Press
repeatedly to select Flat, Music, Movie,
Speech, User sound tone.
A5
Name of the Remote Control Buttons
Remote Control
ENGLISH
SOURCE
If you press the button once,
the following Input Signal
Window will appear. Select the
signal type you want using the
button.
TV/AV
TV/AV button
:
TV
I/II
:
AV
>
>
S-Video
Bilingual choice
(TV only)
>
Component 1
>
Component 2
and sound mode selection
Press this button
to switch from Stereo to Mono sound in
of
case
transmission, or from Nicam Stereo to
Nicam Mono, in case of digital transmission.
stereo
to switch from Nicam Dual I to Nicam Dual II
Nicam Dual I+II in
or
of Nicam Dual
case
transmission.
to choose between Dual
case
of
bilingual
Dual I sends the
the
loudspeakers
I, Dual II
transmission
primary
or
Dual I+II in
:
broadcast
language
to
;
Dual II sends the
secondary broadcast language
loudspeakers ;
Dual I+II sends a separate language to each
loudspeakers.
to the
Sound
output selection (AV, RGB, DVI only)
AV, RGB, DVI mode, you can select output
sound for the left and right loudspeakers.
Repeatedly press the I/II button to select the
sound output.
L+R : Audio signal from audio L input is
sent to the left loud speaker and
audio signal from audio R input is
sent to the right loud speaker.
L+L : Audio signal from audio L input is
sent to left and right loud-peakers.
R+R : Audio signal from audio R input
is sent to left and right loud-speakers.
In
NOTE
:
In
case
Nicam stereo
A6
of weak stereo sound
transmission, select
signals, with
reception.
mono
stereo
or
Using the
Remote Control
Remote Control
PR
(
VOL
(
) Buttons
) Buttons
OK Button
Number buttons
AUTO Button
?This function is to
automatically search the
available channels. It is available to the TV
signal
inputs only.
?This function is to
automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode). It is
available to the PC analog signal input only.
SWAP function
To switch the main-screen and sub-screen in
PIP/POP/PBP mode.
A7
ENGLISH
SLEEP
You
SLEEP Timer
:
can
set
a
time
period after which the
Component 1/ Component 2
itself to standby. Press the key repeatedly
TV / AV / S-Video /
should switch
to select the number of minutes.
LIST
To
: Programme list
display the programme
list
(0~99).
Note: TV channels
setup
to be
displayed in blue have been
skipped in the Programme Edit
menu
Q.VIEW
:
QUICK VIEW Button (See page A28)
*
Favourite
Program
On
:
Rotate Favourite channel.
*
Favourite
Program
Off
:
To
display the previously
selected TV channel.
APC / PSM
Press
or
repeatedly to select Dynamic, Standard, Mild, Game
picture mode. This function is not supported in PC
User
mode.
A8
Using the
Remote Control
-
Remote Control
PIP/POP/PBP function
1.
:
PIP
in
Picture)
The sub-screen is
changed
(Picture
SMALL
2.
POP
->
MEDIUM
(Picture
The sub-screen
->
out
in the order shown below.
LARGE
->
OFF
Picture) Button
moves
to the next mode whenever you press
this button.
:
POP ON
->
PBP(FULL)
PBP(4:3)
PBP
POP ON
3.
->
->
OFF
(FULL)
PBP
(4:3)
SWAP Button
You
can swap the main screen and the sub-screen when the
PIP/POP/PBP function is used.
PIP
SWAP
POP
SWAP
PBP
<Table of PIP/POP/PBP Function
Support>
When
'Input Signal 1' comes on in the main
only 'Input Signal 2' can be
displayed on the sub-screen. On the
contrary, if the main screen displays 'Input
Signal 2', the sub-screen can display 'Input
Signal 1' only. You can swap 'Input Signal
1' and 'Input Signal 2' using the SWAP
screen,
button.
*PIP function is not
and 1080i modes.
A9
supported
in
480i, 576i
Remote Control
-
Using the Teletext function
TEXT
To select the teletext
screen
an
on or
off. The main index
the last selected page appears on the
together with an information headline and
or
page
option
line at the bottom of the
screen.
UPDATE
Press the button to appear the TV programme.
At the top of screen indicates that you are still in
the teletext mode. Before
interrupting teletext, you
may select a page number. When the page has
been found, the information line appears briefly on
your screen. Press the button again to reappear
teletext.
SIZE
Press the button
repeatedly to display the
part, the lower part and then
upper
to return to the
normal page size.
HOLD
Press the button to
of the
subpages.
stop the automatically rotating
Press the button
continue the automatic
again to
rotating again.
INDEX
To
display the
A10
main index.
ENGLISH
Using the
Remote Control
-
Remote Control
Using the Teletext function
MODE
The mode will be switched in the Teletext
mode.
TIME
press this button to select a sub page number.
The sub page number is displayed at the
bottom of the screen. To hold or change the
sub page, press the RED/GREEN,
or
NUMBER buttons. Press again to exit this
function.
MIX
Display the teletext pages superimposed on
picture. To switch the TV picture off
press this button again.
the TV
REVEAL
Press the button to reveal/conceal the hidden
information, such
puzzles.
as
information from the
A11
solutions to riddles and
Press this button
again
display.
to
remove
the
To arrange cables in order
*
1.
Disassemble the stand
down
on
the base
as
cover.
Applicable only for
The
shown in the
Stand
cover
may be
-
Optional
models that
easily
support the stand
disassembled
cover
2. After connecting the cables, correctly position the stand cover into the
stand. If
securely
by pressing
figure.
connected, you will hear the latch click into
A12
place.
holes
on
the
ENGLISH
Connecting the Speakers Optional
-
*
Use the
screws
in the below
to secure the
Applicable only
speakers
on
the
for models that
rear
side of the
support the speakers
product
as
shown
figure.
When the
A13
speaker
is installed.
Name and Function of the Parts
Rear View
Back
-
Cap
Open the
back cap before
you install the
DVI
Power Connector
:
IN(HDCP)
RGB IN
product.
AUDIO IN
Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports
PC
Signal Inputs
PC Sound Jack
: Connect the audio cable to the *LINE OUT
AV
Input
jack of the
PC sound card.
Ports
TV Tuner Jack
:
Connect the antenna.
*LINE OUT
A terminal used to connect to the
the
connecting
speaker including
PC sound card has
only Speaker Out,
If the Audio Out of the PC sound card
using
the card
a
built-in
amplifier (Amp). Make sure that
connecting. If the Audio Out of
terminal of the PC sound card is checked before
jumper of the program
reduce the PC volume.
supports both Speaker Out and Line Out,
(Refer
to the Sound Card
A14
Manual).
convert to Line Out
ENGLISH
Connecting to your PC
First of all,
Then,
see
if the
connect the
PC, product and
signal input cable.
the
peripherals
are
turned off.
A
When
connecting
with the DVI
signal input cable.
B
When
connecting
with the D-Sub
signal input cable. (IBM compatible PC)
C
When
connecting
with the D-Sub
signal input cable. (Macintosh)
Rear side of the
product.
A
PC
B
PC
C
MAC
Macintosh
Adapter (not included)
Use the standard Macintosh
adaptor is available
Connect the power cord.
Rear side of the
*
When
adapter since
in the market.
product.
connecting to a
wall outlet.
A15
an
incompatible
(Different signaling system)
A
Turn
on
power
by pressing
the power button
on
the
product.
ENGLISH
Power button
B Turn
Select
an
the PC.
on
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
A
When
?
B
When
?
connecting
with
Select DVI PC
:
a
DVI-D
the remote control to select the
at the front side of the
input signal.
product.
signal input cable.
signal.
DVI-D DIGITAL
connecting with a D-Sub signal input cable.
: 15-pin D-Sub ANALOG signal.
Select RGB PC
・ How to connect to two
Note
Connect the
signal
computers.
cables
(DVI
Press the SOURCE button in
・
a
and
D-Sub) to
each
computer.
computer to
remote control to select the
Directly connect to a grounded power outlet on the wall
wire.
A16
or a
use.
power bar with
a
ground
Watching the VCR/DVD
Connect the video cable
cord
A
as
shown in the below
When
?
connecting with a RCA cable.
input terminal with a proper color match.
(Video Yellow, Sound (left) White, Sound (right)
Connect the
--
B
and then connect the power
figure
(See page A15).
When
?
--
connecting
with
a
Connect to the S-Video
Red)
--
S-Video cable.
input terminal
to watch
high image quality
movies.
Product
Red
Yel ow White
RCA Cable
(not included)
S-Video Cable
(not included)
Y
W
R
VCR/DVD Receiver
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
A
When
?
B
at the front side of the
an
RCA cable.
an
S-Video cable.
Select AV.
When
?
connecting with
the remote control to select the
connecting
with
Select S-Video.
A17
product.
input signal.
the HDTV(720p/1080i)
Watching
Connect the video/audio cable
power cord
?
as
shown in the below
figure
and
then,
connect the
(See page A15).
Connect the
input terminal
with
a
ENGLISH
proper color match.
Product
Gre n
Blue
Red
White
Red
Compnetabl (noticlude)
Gre n
AudioCable (noticlude)
Blue
Red
White
Red
HDTV Receiver
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
.?
Select
Component
the remote control to select the
at the front side of the
1.
A18
product.
input signal.
Watching
Connect the video/audio cable
power cord
?
as
the DVD (480i)
shown in the below
figure
and
then,
connect the
(See page A15).
Connect the
input terminal
with
a
proper color match.
Product
Blue
Gre n
Red
White
Red
Compnetabl (noticlude)
Gre n
AudioCable (noticlude)
Blue
Red
White
Red
DVD Receiver
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
.?
Select
the remote control to select the
at the front side of the
Component 2.
A19
product.
input signal.
Connecting to DVI-D(HDCP) from the VCR/DVD/Set-top Box
Connect the video/audio cable
power cord
as
shown in the below
figure
and then connect the
ENGLISH
(See page A15).
Product
DVI-D
Signal
RCA-PC
Cable
Audio Cable
VCR/DVD/Set-top Box
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
?
the remote control to select the
at the front side of the
Select DVI PC.
A20
product.
input signal.
Watching the TV
See if the antenna cable is connected at the
then,
connect the power cord
rear
side of the
product
and
(see page A15).
Rear Side of the Product
Antenna Cable
(optional)
Select an input signal.
Press the SOURCE button
on
Or, press the SOURCE button
?
the remote control to select the
at the front side of the
Select TV.
A21
product.
input signal.
Connecting AV Outputs
Connect to the external device if you record the
When you set the input signal of the main
watching to the AV output terminal.
screen as
broadcasting.
'AV
(CVBS)',
you
can
transmit the
Product
Yel ow White
Red
RCA able (noticlude)
Y
Video/TV/Product
A22
W
R
signal that you're
ENGLISH
Selecting and Adjusting the Screen
Name of the Buttons in the Screen
Adjustment
Unit
Power Button
?
Press this button to turn
on
the power. Press this button
again
to
turn it off.
?
Power Indicator
?
MENU Button
Adjust
lights up green when the display operates normally(on
mode). If the display is in sleep (Energy Saving) mode, this indicator
color changes to amber.
Use this button to show/hide the OSD
(On
Screen
Display)
menu
screen.
?
OSD Select /
This Indicator
Use this button to select
an
icon
or
adjust the setting
Button
?
?
Use this button to directly control
brightness and contrast of the PC signal
(RGBPC/DVIPC).
Adjust the volume.
A23
in the OSD
screen.
Name of the Buttons in the Screen
[For
AUTO/SELECT Button
PC
Adjustment
Unit
ENGLISH
Analog signal]
[Other signals]
?
The current
signal
and mode information will be
SOURCE Button
Select the
?
input signal
TV
Television
AV
Composite Video
Separate Video
S-Video
Component 1
Component 2
HDTV
RGB PC
15-pin D-Sub analog signal
DVI digital signal
DVD
DVI PC
?
The unit that receives the
signal
from the remote control.
A24
displayed.
Selecting and Adjusting the Screen
OSD Menu
Icon
Function
Description
Set/Selects the channel. (available
only
when
watching TV)
STATION
Adjusts
screen
brightness,
contrast and color that you
prefer.
PICTURE
Adjusts
the audio function.
Adjusts
the timer function.
Adjusts
the
screen
status
Adjusts
the
screen
video.
SOUND
TIMER
according
to the circumstances.
SPECIAL
SCREEN
Adjusts PIP/POP/PBP
mode function.
PIP/POP/PBP
Note
OSD(On
Screen
Display)
The OSD function enables you to
adjust
graphical presentation.
A25
the
screen
status
conveniently
since it
provides
adjust the OSD (On Screen Display)
How to
screen
ENGLISH
Pops
the
Move where
up
a
Move where
icon
you want to
Select
you want to
menu
menu
adjust
screen
Press the MENU
Button, then the main
menu
To
3
When the icon you want becomes
highlighted,
4
Use the
adjust
5
Accept
6
Exit the OSD
access a
How to
Adjust the
control,
use
the
Buttons.
Buttons to
changes by pressing
by pressing
of the OSD appears.
press the OK Button.
the item to the desired level.
the OK Button.
the EXIT Button.
adjust the
screen
automatically
You need to
a new
to set
adjust the screen display when connecting the product to
or changing the mode. Refer to the following section
optimal product screen.
computer
an
Press the AUTO/SELECT button
in the PC
analog signal. Then,
an
(AUTO button in a remote control)
optimal screen status will be
selected that fits into the current mode.
If
status
Use the remote control to
2
the
a
icon
Save
Exit from the
adjustment
menu screen.
adjust
?
1
Select
menu
adjustment is not satisfactory, you
phase in the OSD menu.
need to
adjust
screen
clock and
A26
position,
adjust the
OSD
screen.
Selecting and Adjusting the Screen
Set/Selects the channel when
Manual
using the TV (Optional)
Programme
Favourite programme
Auto programme
Manual
Programme
Favourite programme
System
Press the
'M' before
Storage
from
buttons to select the TV
launching
an
part of the
menu
to
To select
a programe number or enter the programe number with the
number buttons from where you want to start searching for new channels.
If you want to keep the channels 1 to 10 stored earlier, enter programe
new
Press OK button to start automatic
channels
are
channels from number 11 onwards.
programming. all available TV
automatically. To stop auto
EXIT button. When auto programming
searched for and stored
programming, press the MENU or
is completed, the programme list menu
Manual programme
To
Manual
or
automatic search.
number 11. Your TV search for
Start
system of the country
world from where you want to receive the TV channels.
If you want to receive 'SECAM M' channel, change the SYSTEM
appears.
change
the channel.
Programme
Favourite programme
System
Press the
buttons to select the TV
system of the country
or
part of the
world from where you want to receive the TV channels.
Storage
Channel
Press the
buttons to select the channel number or enter the programe
number with the number buttons in where you want to store channel.
Press the
buttons to select C-CH for aerial channels
channels.If you know the C-(01~69)or S-channel
it directly with the digit buttons 0 to 9.
To select the channel
reception type.
A27
:
or
S-CH for cable
number(01~47),enter
V/UHF / CABLE
Set/Selects the channel when
Name
To
It is
the assigned channel name.
possible to change the name stored
to
a
TV channel which has not
or
numbers
see
be
can
Press the
Press the
Fine tune In
case
the
given
in the memory
yet been entered. A
or
to
assign
move cursor
character.(space,
AUTO/SELECT button (or
a
to be
name
changed.
number 0~9,and
OK button
the
on
Press the
->
alphabet A~Z) ->
remote control).
of poor reception, you can improve the reception by fine
buttons to fine tune for the best picture and sound.
Use the
direction.
a name
with up 5 letters
to the programme numbers 0 to 99.
buttons to
buttons to select
Search
using the TV (Optional)
buttons to search next channel backward
or
tuning.
Use
foreward
Programme edit
Manual
1
2
4
5
6
adjust the Edit
7
8
9
10
11
12
13
14
15
16
17
18
19
submenu function, Press the OK
Press the
Delete
3
Programme
Favourite programme
To
0
->
buttons to select
Press the red
key
channel number is
on
button
-->
a
on
the remote control
TV channel to be deleted.
the remote control
->
The selected TV
deleted, all the following channels
are
shifted up
one
position.
Press the
Copy
buttons to select
a
TV channel to be
Press the green key on the remote control. All the
numbers are shifted down one position.
Press the
Move
Press the
buttons to
Press the
buttons to select
yellow key
move
displayed
key
on
Programme
Favourite programme
->
Press the
->
to release this function.
a
channel number to be
the remote control. The
skipped
skipped.
->
TV channel is
This function lets you select your favourite
ON
Manual
->
in blue.
Favourite
programme
channel number to be moved.
the TV channel to the desired channel number.
buttons to select
Press the blue
a
the remote control.
yellow key again
Press the
Skip
on
copyed. ->
following channel
0
C21
1
C22
2
C23
3
C24
4
C25
5
C26
6
C27
7
C28
programmes directly. (8 channel)
Press the
buttons to select
channel number.
*
Q.VIEW button(remote control)
Rotate Favourite channel.
A28
:
a
ENGLISH
Selecting and Adjusting the Screen
Adjusting Screen Color
PSM
PSM
TV/AV/S-Video/Component
Component 2 input only
Dynamic
ACC
1/
Standard
Contrast
50
Mild
Brightness
50
Game
50
User
Color
Sharpness
50
Tint
0
The PSM function
automatically adjusts the screen image quality
depending on the AV/TV usage environment.
Dynamic : Select this option to display with a sharp image.
Standard : The most general and natural screen display status.
Mild : Select this option to display with a mild image.
Game : Select this option to enjoy dynamic image when playing
User : Select this option to use the user-defined settings.
?
?
?
?
a
game.
?
PSM
Dynamic
ACC
Standard
Contrast
50
Mild
Brightness
50
Game
Color
50
User
Sharpness
50
Tint
0
Contrast
To adjust the contrast of the
Brightness
To adjust the brightness
screen.
of the
screen.
Color
To adjust the color to desired level.
Sharpness
To adjust the
cleaness of the
screen.
Tint
To adjust the tint to desired level.
ACC
PSM
Warm
ACC
Normal
Cool
factory setting color set.
Slightly reddish white.
Normal : Slightly bluish white.
Cool : Slightly purplish white.
Selecting
?
?
?
If the
Note
Warm
a
:
PC(D-Sub analog)/DVI PC(DVI Digital), the adjustable items in the
temp (9300K / 6500K).
If the 'PSM' setting in the PICTURE menu is set to Dynamic, Standard, Mild or Game
the subsequent menus will be automatically set.
input
is RGB
CSM function
are
color
A29
Adjusting Screen Color
RGB PC / DVI PC
CSM
PSM
6500K
CSM
9300K
User
?
?
Adjusting
PSM
6500K
CSM
9300K
Contrast
50
Brightness
50
Red
50
Green
50
Blue
50
6500K/9300K
Selecting a factory setting color set.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
User : Select this option to use
the user-defined settings.
Contrast
To adjust the contrast of the
Brightness
To adjust the brightness
User
screen.
of the
screen.
Red / Green / Blue
Set your own color levels.
the audio function
SSM
The best sound tone
quality will be selected automatically
depending on the video type that you're currently watching.
SSM
Flat
Balance
Music
AVL
Movie
SRS WOW
Speech
?
?
User
?
?
?
Flat
The most
Movie
Select this
To
Set the SRS WOW
use
this
the
enjoy
sublime sound.
to
Select this
option
to watch
User
Select this
option
to
Use this function to balance sound from the left and
across
enjoy
option
To
sound volumes
and natural audio.
original
sound when
listening
Speech
Balance
adjust uneven
appropriate level.
commanding
Music
Select this option to
to the music.
AVL
SRS WOW
ENGLISH
input only
use
sports broadcasting.
the user-defined audio
settings.
right speakers.
all channels
or
signals automatically to
the most
feature, select ON.
menu on.
The SRS WOW function
plays back the mono or stereo sound input with the dynamic surround
provide rich and profound sound tone. If you set the SRS WOW on, user audio
not be adjusted.
effects. It will
setting
Note
can
When connected to your computer and the 'SSM' setting in the audio menu is
Movie or Speech, the available menus are Balance, AVL and SRS WOW.
A30
one
of
Flat, Music,
Selecting and Adjusting the Screen
Adjusting
the timer function
Clock
If the time is
1)
2)
3)
4)
5)
Off / On Timer
on
the clock is
incorrect,
Press the MENU button and then
reset the clock
manually.
button to select the TIMER
use
Press the
button and then
use
button to select the Clock
Press the
button and then
use
button to set the
Press the
button and then
use
button to set the
Press the
button and then
use
button to set the
Setting
is
menu.
menu.
hour(01~12).
minutes(00~59).
morning(AM) or afternoon(PM).
available, however, operation is only allowed upon TV input
The off timer
automatically switches the set to standby at the pre-set time.
button to select the TIMER menu.
1) Press the MENU button and then use
button and then use
button to select Off Timer or On Timer.
2) Press the
button and then use
button to set the hour(01~12).
3) Press the
button and then use
button to set the minutes(00~59).
4) Press the
button and then use
button to set the morning(AM) or afternoon(PM).
5) Press the
button and then use
button to select On or Off.
6) Press the
button and then
button to set the channel at
7) Only On Timer function; Press the
turn-on.
Auto Off
Setting
is
Then, press the
button and then
use
button to set the turn-on sound level.
available, however, operation is only allowed upon TV input
If Auto Off is active and there is
no input signal, the TV swithchs to Stanby mode
automatically after 10 minutes.
button to select the Auto Off menu.
1) Press the MENU button and then use
button and then use
button to select On or Off.
2) Press the
Note
・ In the event of power
interruption (disconnection or power failure), the clock must be reset.
on by the on time function it will automatically switch
back to standby mode unless a button has been pressed.
Once the On or Off time is set, these functions operate daily at the preset time.
Off Timer function overrides On Timer function if they are set to the same time.
The set must be in standby mode for the On timer to work.
・ Two hours after the set is switched
・
・
・
A31
Selecting
the
options
ENGLISH
Input
Child Lock
Language
Power Indicator
Transparency
Zoom
Reset
Input
Child Lock
If you press the button once, the following
Input Signal Window will appear. Select
Input
TV
Child Lock
AV
Language
S-Video
Power Indicator
Component
1
Transparency
Component
2
Zoom
RGB PC
Reset
DVI PC
Use the
the
buttons to select On
or
with the remote control. This feature
In order to lock the OSD
In order to unlock
1)
screen
Off. The Set
can
you want
using
the
can
be set up
that it
so
can
only
set the Child Lock tab to the 'on'
position.
:
the remote control and set Child Lock to the 'off'
on
be used
prevent unauthorized viewing.
adjustment,
it, do the following
Push the MENU button
signal type
button.
position.
Language
To choose the
Power
Use this function to set the power indicator on the front side of the product to On
If you set Off, it will go off. If you set On at any time, the power indicator will
Indicator
automatically
Transparency
To
language
be turned
in which the control
names are
displayed.
on.
adjust the transparency
of the OSD
menu screen.
Use this function to
Zoom
Input
Zoom
0
Child Lock
H Position
0
Language
V Position
0
zoom
in the
screen.
When you turn the product off and on again,
the default screen size will be restored.
Press the
Power Indicator
button to
display
the
submenu for Zoom.
Transparency
*
Zoom
If the
Reset
horizontal
*
zooming value is set to '0', vertical and
positioning cannot be adjusted.
The variable range
can
type of the input signal.
Reset
Use this function to reset the
product
to the
factory
default.
differ
according
to the
However, language selection
will not be initialized.
Note
the Zoom
menu
or
will be disabled if the
screen
A32
size is not Full
or
PIP/POP/PBP is in
use.
Off.
Selecting and Adjusting the Screen
Selecting
the
options
Input
Child Lock
Language
Power Indicator
Transparency
Zoom
Reset
Set ID
You
can assign a unique SET ID NO (name
assignment) to each product when several
products are connected for display. Specify the
number (0~99)using the
button and exit.
Use the assigned SET ID to individually control
each product using the Product Control
Program.
Set ID
Logo Display Lamp
ID
Logo Display
Lamp
Use this function to set the
or
Off. If you set
0
Logo Dispaly Lamp
on
the front side of the
On, the lamp will automatically be turned
A33
on.
product
to On
Adjusting Screen CLOCK/PHASE
and Position
ENGLISH
SCREEN
ARC
Auto-configure
Clock
Phase
Position
ARC
To select the
image
size of the
<TV/AV/S-Video/Component 1,
2
screen.
<RGB PC / DVI PC
input only>
*
input only>
SCREEN
SCREEN
ARC
Full
ARC
Full
Auto-configure
4:3
Auto-configure
1:1
Clock
Spectacle
Clock
Phase
Zoom 1
Phase
Position
Zoom 2
Position
When the
component
1
input signal
is
720p
or
1080i, the spectacle function is
not
supported.
Auto-
This button is for the automatic
configure
This function is suitable for
Clock
To minimize any vertical bars or stripes visible on the screen background. The horizontal
screen size will also change. This function is suitable for analoge singnal input only(RGB
PC
Phase
To
adjustment of the screen position, clock and phase.
analoge singnal input only(RGB PC input only).
input only).
display. This item allows you to remove any
sharpen the image of characters. This function is suitable
singnal input only(RGB PC input only).
adjust
the focus of the
horizontal noise
or
for
and clear
analoge
To
Position
adjust position of the screen
(RGB PC input only).
Press the
button to display the
for position.
SCREEN
ARC
Auto-configure
Clock
submenu
Phase
Left
Position
Right
Up
Down
A34
Moving
the
screen
position horizontally.
Moving
the
screen
position vertically.
Selecting and Adjusting the Screen
Adjusting PIP/POP/PBP Mode (Multiple Screen)
On/Off
Off
Source
PIP
Siz e
POP
Image
PBP
Functions
Sound
Position
Swap
On/Off
PIP
After
the
selecting PIP
following menu
in the PIP On/Off menu,
items can be adjusted.
POP
After
the
selecting POP in the POP On/Off menu,
following menu items can be adjusted.
PBP
After
the
Source
To select
Size
To
adjust
Image
To
adjust
an
input signal
selecting PBP in the PBP On/Off menu,
following menu items can be adjusted.
for PIP/POP/PBP.
the size of the PIP/POP/PBP
the
image
screen.
(PIP : Small, Medium, Large
of the PIP/POP/PBP screen; Press the
buttons to
image. Use the
button to
submenu for PIP/POP/PBP
level. The items of the sub-menu may vary
depending
on
the
adjust
Contrast
PIP/POP/PBP
:
display
Full, 4:3)
the
the item to the desired
type of the
Adjust
/ PBP
source.
screen
contrast.
screen
brightness.
On/Off
Brightness
Adjust PIP/POP/PBP
Source
Size
Image
Tint
0
Color
Adjust the PIP/POP/PBP
Sound
Position
screen
color.
Tint
Swap
To adjust the tint to desired level.
This function is available only in NTSC
*
The sub-menu
signal.
Sound
To turn the PIP/POP/PBP sound on/off.
A35
can
differ
according
broadcasting
to the
mode.
type of the input
Adjusting PIP/POP/PBP Mode (Multiple Screen)
To
Position
adjust
the
Functions
position
to PIP
screen.
On/Off
Source
Size
Image
Sound
Position
Swap
Swap
To switch the main-screen and subscreen
On/Off
To Set
Source
Size
Image
Sound
Position
Swap
PIP
SWAP
POP
SWAP
PBP
A36
in PIP/POP/PBP mode.
ENGLISH
Controlling the Multiple Products
Use this method to connect several
You
can
control several
Connecting
products
to a
single PC.
the cable
Connect the RS-232C cable
*
products to a single PC.
by connecting them
at a time
(RS-232C protocol)
as
shown in the
picture.
The RS-232C
the PC and
product.
turn the
protocol is used for communication between
product on/off, select an input source or adjust the
OSD
from your PC.
menu
You
OUT
RS-232C Cable
(not included)
PC
OUT
Product
OUT
IN
IN
Communication Parameter
▶ Baud Rate
9600bps (UART)
Length : 8bits
▶ Parity Bit : None
▶ Stop Bit : 1bit
:
▶ Data
▶ Flow Control
:
None
▶ Communication Code : ASCII code
A37
OUT
IN
can
Command Reference List
COMMAND 1
01. Power
COMMAND 2
k
a
00H
k
b
00H
Ratio
k
c
01H
04. Screen Mute
k
d
00H
05. Volume Mute
k
e
00H
06. Volume Control
k
f
00H
07. Contrast
k
00H
08.
k
g
h
09. Color
k
i
00H
10. Tint
k
j
00H
11.
k
k
00H
12. OSD Select
k
l
00H
13. Remote Lock On/Off
k
m
00H
14. PIP/PBP/POP On/Off
k
n
00H
15. PIP Position
k
q
00H
16. Balance
k
t
00H
17. ACC
18. PIP/PBP/POP SOURCE
k
k
u
y
00H
00H
02.
03.
Select
Input
Aspect
Brightness
Sharpness
19. Auto
00H
j
u
01H
20. Tune Command
m
a
01H
21.
m
c
Configure
Key
Transmission /
Receiving
Key
Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*
*
*
[Command 1]: First command. (j or k)
[Command 2]: Second command.
[Set ID]: You can adjust the set ID to choose desired product
ID number in Special menu. Adjustment range is 0
When selecting Set ID '0', every connected
99.
~
TV set is controlled. Set ID is indicated
as
decimal
(0~99)on menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
*
[DATA]:
To transmit command data.
Transmit 'FF' data to read status of command.
*
[Cr]: Carriage
Return
ASCII code '0x0D'
*
DATA
[
]:
ASCII code
Space (0x20)'
A38
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(Hexa)
01H
08H
06H
01H
01H
64H
64H
64H
64H
64H
64H
01H
01H
03H
03H
64H
03H
08H
7DH
Code
ENGLISH
Controlling the Multiple Products
Transmission /
Receiving
Protocol
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
*
The Product transmits ACK
this format when
(acknowledgement)
based
on
normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
receiving
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
*
The Product transmits ACK
this format when
functions
Data 1:
or
receiving
communication
Illegal Code
supported
2: Not
3: Wait
(acknowledgement)
more
01. Power On
based
on
abnormal data from non-viable
errors.
function
time
(Command
:
a)
▶ To control Power On/Off of the Set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data0:PowerOff
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
▶ To show the status of Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data 0
:
Power Off
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
*
The Product transmits ACK
this format when
(acknowledgement)
based
on
normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
receiving
computer.
A39
(RS-232C protocol)
Transmission /
02.
Receiving
Protocol
Input Select(Command : b) (Main Picture Input)
input source for the Set.
You can also select an input source using the SOURCE
▶ To select
button
on
the remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 0:TV
5
2:AV
3
:
S-Video
4
:
Component
:
Component
2
6:RGBPC
8:DVIPC
1
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
03.
Aspect Ratio(Command : c) (Main picture format)
adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
▶ To
Screen
menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data1:4:3
2:Full
3
:
Spectacle
4
:
Zoom1
5
:
Zoom2
6
:
1:1(PC)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
A40
ENGLISH
Controlling the Multiple Products
Transmission /
04. Screen
Mute(Command
▶ To select
screen
Protocol
Receiving
:
d)
mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0
1
:
Screen mute off
:
Screen mute
on
(Picture on)
(Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
05. Volume
Mute(Command
:
e)
▶ To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0
1
:
Volume Mute On
:
Volume Mute Off
(Volume Off)
(Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0
1
:
Volume Mute On
:
Volume Mute Off
06. Volume
(Volume Off)
(Volume On)
Control(Command
:
▶ To control On/Off of the Volum
f)
.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
A41
(RS-232C protocol)
Transmission /
07.
Receiving
Contrast(Command
▶ To
adjust
You
can
screen
also
:
Protocol
g)
contrast.
adjust
the contrast in the Picture
menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
・Refer to 'Real data
mapping'
as
shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
*
Real data
mapping
0:Step0
.
.
.
A:Step10(SETID10)
.
.
.
F:Step15(SETID15)
10:Step16(SETID16)
.
.
.
64
:
Step
100
08.
Brightness(Command : h)
▶ To adjust screen brightness.
You can also adjust the brightness
in the Picture
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
・Refer to 'Real data
mapping'
as
shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
*
Real data
mapping
0:Step
.
.
.
A:Step10(SETID10)
.
.
.
F:Step15(SETID15)
10:Step16(SETID16)
.
.
.
64
:
Step
100
A42
menu.
ENGLISH
Controlling the Multiple Products
Transmission /
09.
Color(Command
▶To
adjust
You
can
:
the
screen
also
adjust
Receiving
i) (TV,
AV
Protocol
only)
color.
the color in the Picture
menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
10.
Min:00H~Max:64H
Tint(Command
▶To
adjust
You
can
j) (TV,
:
the
screen
also
adjust
AV-NTSC
only)
tint.
the tint in the Picture
menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red: 00H
Green: 64H
~
(Hexadecimal code)
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Red: 00H
Green: 64H
~
*Tint:-50~+50
Sharpness(Command : k) (TV, AV only)
adjust the screen Sharpness.
You can also adjust the sharpness in the Picture
11.
▶To
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
A43
menu.
(RS-232C protocol)
Transmission /
12. OSD Select
Receiving
(Command
:
Protocol
ENGLISH
l)
▶To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data0:OSDOff
1:OSDOn
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data0:OSDOff
13. Remote Lock
1:OSDOn
On/Off(Command
:
m)
▶To control Remote Lock on/off to the set.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0
:
Remote Lock Off
1
:
Remote Lock On
1
:
Remote Lock On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0
:
Remote Lock Off
14. PIP/PBP/POP
On/Off(Command
:
n)
▶ To control PIP/PBP/POP On/Off of the Set.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data0:OFF
1:PIP
2:PBP
3:POP
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
Data0:OFF
1:PIP
2:PBP
3:POP
A44
Controlling the Multiple Products
Transmission /
15. PIP
▶ To
Receiving
Position(Command
PIP
adjust
:
Protocol
q)
position.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0
:
Bottom of the
1
:
Bottom of the left side
2
:
3
:
Top
Top
right
of the left side
of the
right
side
on screen
on screen
on screen
side
on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data 0
16.
:
Bottom of the
1
:
Bottom of the left side
2
:
3
:
Top
Top
right
of the left side
of the
right
Balance(Command
▶To
adjust
the
screen
side
on screen
side
:
on screen
on screen
on screen
t)
Balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
*
Min:00H~Max:64H
Balance
:
-50
+50
~
A45
(RS-232C protocol)
Transmission /
17.
ACC(Command
▶To
adjust
the
:
screen
Receiving
Protocol
ENGLISH
u)
color
temperature.
Transmission
[k][u][ ][Set ID][ ][Data]][Cr]
Data 0
Normal
:
2
(9300K)
:
Warm
(6500K)
1:Cool
3:User
PC:0,2,3
AV:0,1,2
Acknowledgement
[u][ ][Set ID][ ][OK]][Data][X]
Data 0
Normal
:
(9300K)
2
:
Warm
(6500K)
1:Cool
3:User
PC:0,2,3
AV:0,1,2
18. PIP/PBP/POP
SOURCE(Command
▶To select the sub-screen
:
y)
source.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0:TV
5
2:AV
3
:
S-Video
4
:
Component
:
Component
2
6:RGBPC
8:DVIPC
1
Acknowledgement
[y][ ][Set ID][ ][OK][Data][X]
Data 0:TV
5
2:AV
3
:
S-Video
4
:
Component
:
Component
2
6:RGBPC
8:DVIPC
1
19. Auto
Configure(Command : j u)
adjust picture position and minimize image shaking
automatically. it works only in RGB(PC) mode.
▶To
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1:Toset
Acknowledgement
[u][ ][Set ID][ ][OK][Data][X]
A46
Controlling the Multiple Products
Transmission /
20. Tune
Receiving
command(Command
▶Tune channel to
: m
following physical
Protocol
a)
number.
Transmission
[m][a][ ][Set ID][ ][Data][ ][Cr]
Data 1
:
Channel Number
Acknowledgement
[a][ ]Set ID][ ][OK][Data][X]
Data 1
:
Channel Number
21.Key(Command
c)
key code.
: m
▶To send IR remote
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data
Key
code
:
Refer to page 49.
Acknowledgement
[c][ ]Set ID][ ][OK][Data][X]
A47
(RS-232C protocol)
▶ Connect your wired remote control to Remote Control port
▶
Output
on
the Product.
waveform
single pulse,
modulated with 37.917KHz
at 455KHz
signal
Tc
Carrier
FCAR
T1
▶
Configuration
?1st
Duty
frequency
1/Tc
=
ratio
=
=
fosc/12
T1/Tc
=
1/3
of frame
frame
Lead
code
Low
High
custom code
Data code
custom code
Data code
C0C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7
?Repeat
frame
Repeat
▶
code
Tf
Lead code
9ms
4.5ms
0.55ms
▶
Repeat
code
9ms
2.25ms
▶ Bit
description
?Bit
?Bit
"0"
"1"
0.56ms
0.56ms
1.12ms
▶
Frame interval
?The
:
2.24ms
Tf
waveform is transmitted
as
long
as a
key
Tf
is
depressed.
Tf
Tf=108ms@455KHz
Function
Note
00
PR(▲)
R/C Button
01
PR(▼)
R/C Button
02
VOL(▶)
R/C Button
03
VOL(◀)
R/C Button
08
POWER
R/C
C4
POWER ON
Discrete IR
Code(Only
Power
On)
C5
POWER OFF
Discrete IR
Code(Only
Power
Off)
09
MUTE
R/C Button
10
Number
11
Number
12
Number
13
14
15
Code(Hexa)
Button(Power On/Off)
Key
0
R/C Button
Key
1
R/C Button
Key
2
R/C Button
Number
Key
3
R/C Button
Number
Key
4
R/C Button
Number
Key
5
R/C Button
16
Number
Key
6
R/C Button
17
Number
Key
7
R/C Button
18
Number
Key
8
R/C Button
19
Number
Key
9
R/C Button
0B
TV/AV
R/C Button
98
SOURCE
R/C Button
D6
TV
Discrete IR
Code(Input
TV
Selection)
5A
AV
Discrete IR
Code(Input
AV
Selection)
D8
S-Video
Discrete IR
Code(Input
S-Video
Discrete IR
Code(Input Component
1
Selection)
Discrete IR
Code(Input Component
2
Selection)
BF
Component
1
D4
Component
2
C6
DVI
Discrete IR
Code(Input
DVI
D5
RGB
Discrete IR
Code(Input
RGB
0E
SLEEP
R/C Button
43
MENU
R/C Button
44
OK
R/C Button
60
PIP
R/C Button
63
SWAP
R/C Button
79
ARC
R/C Button
76
ARC(4:3)
Discrete IR
Code(Only
4:3
77
ARC(Full)
Discrete IR
Code(Only
Full
AF
ARC(ZOOM)
Discrete IR
Code(Only
Zoom
54
AUTO PROGRAM
R/C Button
39
CAPTION
R/C Button
99
AUTO CONFIG
Discrete IR Code
Selection)
Selection)
Selection)
mode)
mode)
mode)
Troubleshooting
No
is
image
Is the monitor power cord connected?
?
displayed
See if the power cord is
properly connected to the
outlet.
Is the power indicator
light on?
Power is on, power indicator is green
but the
screen
appears
extremely
?
See if the power switch is turned
?
Adjust brightness
?
If the
product
mouse or
range'
message
?
appear?
The
signal
cable' message
?
or
move
the
from the PC
horizontal
Maximum resolution
RGB PC
:
DVI PC
1360
The
:
signal
1600
x
x
1200
768
@60Hz
@60Hz
cable between PC and
connected. Check the
?
saving mode,
key.
(video card) is out of the
frequency range of the
product. Adjust the frequency range by referring
to the Specifications in this User's Guide.
*
appear?
is in power
press any
signal
vertical
Does the 'Check
again.
dark.
Is the power indicator amber?
Does the 'Out of
and contrast
on.
Press the 'SOURCE'
to check the
signal
menu
product
is not
cable.
in the remote control
input signal.
'Unknown Monitor' message appears when the product is connected.
Did you install the driver?
Install the
product driver, which is provided with
product, or download it from the web site.
(http://www.lge.com)
?
the
See if the
?
referring
plug&play
function is
supported by
to the video card User's Guide.
'Controls locked' message appears.
The 'Controls locked' message
appears when pressing the Menu
button.
Note
*
*
?
The control
locking function prevents unintentional
setting change due to careless usage. To
unlock the controls, simultaneously press the Menu
button and ▶ button for 5 seconds. (You cannot set
this function using the remote control buttons. You
can set this function in the product only.)
OSD
Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
A50
ENGLISH
Is the
screen
position wrong?
?
D-Sub
analog signal
optimal
screen
mode. If
?
automatically select the
status that fits into the current
adjustment
Position OSD
Press the "AUTO" button in
--
the remote control to
is not
satisfactory,
use
the
menu.
See if the video card resolution and
supported by
the
product.
If the
frequency are
frequency is out of
range, set to the recommended resolution in the
Control Panel
Display Setting menu.
--
?
Do thin lines appear on the
background screen?
D-Sub
analog signal
screen
mode. If
or
the
?
D-Sub
analog signal
screen
mode. If
adjust the
position
in the
use
the
Press the "AUTO" button
--
automatically select
an
is not
satisfactory,
use
the
menu.
?SeeiftheZoomvalueissetto0.Ifitis,you
cannot adjust the H/V Position value.
automatically adjusted
?
If the
PC,
when connected to the PC.
screen
Brightness differs
screen
in the main and
?
size is not full when connected to the
execute the PIP/POP/PBP to
screen
change to
full
mode.
You cannot
adjust brightness
PIP/POP/PBP Screen
when connected to the
menu
and tint in the
for the sub-screen
among PIP/POP/PBP menus. Therefore,
brightness can be different for the sub-screen.
PC.
The
satisfactory,
menu.
Screen size is
sub
is not
status that fits into the current
adjustment
Phase OSD
horizontal/vertical
an
menu.
in the remote control to
optimal
Zoom
automatically select
status that fits into the current
adjustment
Clock OSD
Unable to
Press the "AUTO" button
--
in the remote control to
optimal
Horizontal noise appears
characters look blurred.
--
screen
is
displayed abnormally.
?
The proper
input signal
signal port.
Connect the
with the
No sound appears in the TV channel
the
signal
input signal.
cable that matches
?SeeiftheTVsoundissettomono.ifitis,the
display window.
After-image appears when
product is turned off.
source
is not connected to the
?
sound will not be
displayed.
If you
image for a long time, the pixels
quickly. Use the screensaver
use a
fixed
may be damaged
function.
No sound?
No sound is available when the
PIP/POP/PBP mode is
?
See if the audio cable is connected
?
Adjust the volume.
?
See if the sound is set
?
See if the Sound is set to On in the PIP/POP/PBP
?
Sound is too low.
?
signal
is not
being
received.
properly.
menu.
engaged.
Sound is too dull.
The TV
properly.
?
Select the
appropriate equalize
sound.
Adjust the volume.
See if you have selected the proper channel
mode.
The
screen
menu
size function in the OSD
?
Use the automatic channel
?
See if the TV antenna is
?
See if the PIP/POP/PBP function is in
Screen has poor color resolution
?
Set the number of colors to
Select Control Panel
Table
or mono-
?
If the
size
than 24 bits
(true
menu
--
Display
--
Settings
--
Color
in Windows.
Check the connection status of the
signal
cable.
Or, re-insert the PC video card.
colored.
screen?
more
use.
screen
color)
(16 colors).
Do black
connected.
PIP/POP/PBP function is in use, the
function may not work.
does not work.
Screen color is unstable
setup function.
properly
spots appear on the
?
Several
pixels (red, green, white or black color)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD
panel.
It is not
a
malfunction of the LCD.
Specifications
The
product specifications
improvement.
can
change
without
prior
notice for
product
LCD Panel
[32 inches]
32 inches
(80.04 cm) TFT (Thin Film Transistor)
(Liquid Crystal Display) Panel
Visible diagonal size: 80.04 cm
0.5025 mm (Pixel Pitch)
LCD
[37 inches]
37 inches
(94.03 cm) TFT (Thin Film Transistor)
(Liquid Crystal Display) Panel
Visible diagonal size: 94.03 cm
0.6000 mm (Pixel Pitch)
LCD
[42 inches]
42 inches
(106.68 cm) TFT (Thin Film Transistor)
(Liquid Crystal Display) Panel
Anti-Glare coating
Visible diagonal size: 106.68 cm
0.681 mm (Pixel Pitch)
LCD
Power
[32 inches]
Rated
Power
Voltage
Consumption
AC 100-240V~50/60Hz 2.0A
On Mode
Sleep
Mode
Off Mode
:
160W
:≤4W
:≤2W
[37 inches]
Rated
Power
Voltage
Consumption
AC 100-240V~50/60Hz 2.4A
On Mode
Sleep
Mode
Off Mode
:
220W
:≤4W
:≤3W
[42 inches]
Rated
Power
Voltage
Consumption
AC 100-240V~50/60Hz 2.8A
On Mode
Sleep
Mode
Off Mode
:
300W
:≤4W
:≤3W
NOTE
Information in this document is
subject to change without
A53
notice.
The
product specifications
improvement.
can
change
without
prior
notice for
ENGLISH
[2]
[1]
Dimensions
product
&Weight
H
H
W
D
W
D
[4]
[3]
H
H
Width
x
Height
x
D
W
D
W
Depth
[32 inches]
[1] 80.30 cm
[2] 80.30 cm
[3] 96.40 cm
[4] 96.40 cm
(31.61 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)
(31.61 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches)
(37.95 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)
(37.95 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches)
[37 inches]
[1] 92.80 cm
[2] 92.80 cm
[3] 112.9 cm
[4] 112.9 cm
(36.54 inches) x 61.90 cm
(36.54 inches) x 57.12 cm
(44.45 inches) x 61.90 cm
(44.45 inches) x 57.12 cm
(24.37 inches) x 22.77 cm
(22.49 inches) x 12.00 cm
(24.37 inches) x 22.77 cm
(22.49 inches) x 12.00 cm
(8.96 inches)
(4.72 inches)
(8.96 inches)
(4.72 inches)
(27.64 inches) x 29.45 cm
(25.71 inches) x 11.91 cm
(27.64 inches) x 29.45 cm
(25.71 inches) x 11.91 cm
(11.59 inches)
(4.69 inches)
(11.59 inches)
(4.69 inches)
[42 inches]
[1]
[2]
[3]
[4]
105.7
cm
105.7
cm
125.9
cm
125.9
cm
(41.61 inches) x 70.20 cm
(41.61 inches) x 65.30 cm
(49.57 inches) x 70.20 cm
(49.57 inches) x 65.30 cm
Net
[32 inches]
[1] 19.4 kg (42.77 lbs)
[3] 21.1 kg (46.52 lbs)
[2]
[4]
16.0
17.7
kg (35.27 lbs)
kg (39.02 lbs)
[37 inches]
[1] 31.1 kg (68.56 lbs)
[3] 39.1 kg (86.20 lbs)
[2] 29.0 kg (63.93 lbs)
[4] 35.1 kg (77.38 lbs)
[42 inches]
[1] 41.4 kg (91.27 lbs)
[3] 44.0 kg (97.00 lbs)
[2] 37.0 kg (81.57 lbs)
[4] 39.6 kg (87.30 lbs)
A54
Specifications
The
product specifications
improvement.
Video
Signal
can
change
Max. Resolution
without
notice for
RGB PC
:
DVI PC
1360 X 768
:
1600 X 1200
depending on
Recommended Resolution
prior
RGB PC
:
the OS
product
@60Hz
@60Hz
--
It may not be
supported
video card type.
or
WXGA 1360 X 768
@60Hz
DVIPC:WXGA1360X768@60Hz--Itmaynotbe
supported depending
Horizontal
Frequency
RGB PC
:
30
-
the OS
on
or
video card type.
83 kHz
DVIPC:30-72kHz
Vertical
Frequency
Synchronization Type
Conditions
*
Applicable only
Operational Condition
Storage Condition
for models that
85 Hz
Separate/Composite/SOG (Sync On Green)/Digital
Temperature: 10˚C
Temperature: -20˚C
35˚C
~
Output
Input Sensitivity
Speaker Impedance
10W+10W(R+L)
0.7Vrms
8Ω
NOTE
Information in this document is
subject to change without
A55
notice.
,
60˚C
~
support the speakers
RMS Audio
Audio
-
15-pin D-Sub type, DVI-D (digital), S-Video,
Composite Video, HDTV, DVD
Input Connector
Environmental
56
Humidity: 10%
Humidity: 5%
,
80%
~
95%
~
PC Mode
--
Preset Mode
Preset mode
Horizontal
Horizontal
Vertical
Frequency
(kHz)
Frequency
(Hz)
Vertical
Frequency Frequency
(kHz)
(Hz)
Preset mode
1
VGA
640
x
350
31.469
70
11
VESA 1024
x
768
60.123
75
2
VGA
720
x
400
31.468
70
12
VESA 1024
x
768
68.68
85
3
VGA
640
x
480
31.469
60
13
VESA 1280
x
720
44.772
60
4
VESA 640
x
480
37.500
75
14
VESA 1360
768
47.72
60
5
VESA 640
x
480
43.269
85
15
VESA 1280
x
1024
63.981
60
6
VESA 800
x
600
37.879
60
16
VESA 1280
x
1024
79.98
75
7
VESA 800
x
600
46.875
75
17
VESA 1600
x
1200
75.00
60
8
VESA 800
x
600
53.674
85
9
MAC
x
624
49.725
75
RGBPC:Mode1~Mode17
48.363
60
DVIPC:Mode1~Mode15
10
832
VESA 1024
x
768
x
Power Indicator
Mode
Product
On Mode
Sleep
Green
Mode
Amber
Off Mode
-
VESA wall
mounting
Connected to another
object (stand type and wall-mounted type. This
VESA-compliant mounting interface pad.- optional)
information, refer to the VESA Wall Mounting Instruction
product accepts
For further
a
Guide.
Kensington Security Slot- optional
a locking
cable that can be purchased separately
Connected to
computer
stores
A56
at most
ENGLISH
Download PDF

advertising