LG | M2452D-PT | LG M2252D-PT Owner’s Manual

ENGLISH
OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating the your TV
and retain it for future reference.
LED LCD TV MODEL
M2252D
M2452D
M2752D
www.lg.com
2
TABLE OF CONTENTS
TABLE OF CONTENTS
ENGLISH
3
LICENSES
31
4
INSTALLATION PROCEDURE
33 CUSTOMIZING SETTINGS
33
5
ASSEMBLING AND PREPARING
5
7
8
9
9
12
13
14
16
Unpacking
Parts and buttons
Lifting and moving the TV
Setting up the TV
-Attaching the Stand
-Mounting on a table
-Tidying cables
-Detaching the Stand
-Mounting on a wall
18
WATCHING TV
18
Turning the TV on for the first time
REMOTE CONTROL
Accessing main menus
34 USING THE USER GUIDE
34
34
34
Accessing User Guide menu.
-Using the TV menu
-Using the Remote Control
35 MAINTENANCE
35
35
35
35
36
Cleaning Your TV
Screen and frame
Cabinet and stand
Power cord
Preventing “Image burn” or “Burn-in” on
your TV screen
20MAKING CONNECTIONS
37 TROUBLESHOOTING
20
21
37
21
22
23
24
25
25
26
27
28
29
30
Connecting an antenna
Connecting to a HD receiver, DVD, VCR
player or Gaming device
-HDMI connection
-HDMI to DVI connection
-Component connection
-Composite connection
Connecting to an audio system
-Headphone connection
Connecting to a USB
Connecting to a PC
-HDMI connection
-HDMI to DVI connection
-RGB connection
General
38 SPECIFICATIONS
LICENSES
3
LICENSES
Manufactured under license from Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
ENGLISH
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
4
INSTALLATION PROCEDURE
INSTALLATION PROCEDURE
ENGLISH
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV.
3 Connect an external device to the TV.
NOTE
Image shown may differ from your TV.
yy
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy
The available menus and options may differ from the input source or product model that you are
yy
using.
New features may be added to this TV in the future.
yy
ASSEMBLING AND PREPARING
5
ASSEMBLING AND PREPARING
ENGLISH
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and accessories.
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to
yy
upgrade of product functions.
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to
yy
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
yy
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
B
B
A
A
*A
*B
10 mm
18 mm
6
ASSEMBLING AND PREPARING
M2252D
M2452D
M2752D
ENGLISH
Remote control.
Batteries (AAA).
CD (Owner's Manual).
Cards.
(See p.31, See p.32)
RGB Cable.
(See p.30)
Power Cord.
AC-DC Adapter.
Cable Tie.
(See p.12)
(See p.12)
(See p.13)
Stand Base.
- M2252D, M2452D: See p.9, See p.14
- M2752D: See p.10, See p.15
Stand Body. (Only M2252D /
M2452D model)
Stand Body. (Only M2752D
model)
(See p.9, See p.14)
(See p.10, See p.15)
Screws for Assembly.
2 EA (Only M2752D model)
(See p.10, See p.15)
ASSEMBLING AND PREPARING
7
Parts and buttons
ENGLISH
Remote Control Sensor
Standby Light
yyLighting On: Turned off
yyLighting Off: Turned on
Touch Buttons
Connection panel (See p.20)
Touch button
Description
Scrolls through the saved programmes.
Adjusts the volume level.
OK
Selects the highlighted menu option or confirms an input.
SETTINGS
Accesses the main menus, or saves your input and exits the menus.
INPUT
Changes the input source.
/I
Turns the power on or off.
NOTE
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
8
ASSEMBLING AND PREPARING
Lifting and moving the TV
ENGLISH
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.
When holding the TV, the screen should face
yy
away from you to prevent the screen from
scratches.
CAUTION
Avoid touching the screen at all times, as
this may result in damage to the screen or
some of the pixels used to create images.
It is recommended to move the TV in the
yy
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
yy
the power cord and all cables.
Hold the top and bottom of the TV frame
yy
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
yy
upright, never turn the TV on its side, or tilt
towards the left or right.
ASSEMBLING AND PREPARING
Setting up the TV
3 Attach the Stand Base from the Stand Body by
turning the screw to the right with a Coin.
M2452D
Attaching the Stand
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
1 Place the TV with the screen side down on a
flat and cushioned surface.
CAUTION
CAUTION
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage.
When attaching the stand to the TV,
yy
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
2 Attach the Stand Body from the TV.
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
ENGLISH
M2252D
9
10
ASSEMBLING AND PREPARING
3 Secure the TV and the Stand Body with the M2752D
ENGLISH
2 screws.
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
1 Place the TV with the screen side down on a
flat and cushioned surface.
WARNING
If you don`t fasten the screw tightly, TV will
fall down and get damaged.
2 Attach the Stand Body from the TV.
Insert the two Lockers of the Stand Body right
into the groove of the TV head and secure
them by pressing the left and right bottom
sides.
4 Attach the Stand Base from the Stand Body by
turning the screw to the right with a Coin.
Locker
CAUTION
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
ASSEMBLING AND PREPARING
11
CAUTION
ENGLISH
Do not carry the monitor upside-down as this
yy
may cause it to fall off its stand, resulting in
damage or injury.
The illustration shows a general example of
yy
installation and may look different from the
actual product.
Do not carry the monitor upside-down by
yy
holding the stand body as this may cause it
to fall off, resulting in damage or injury.
The illustration shows a general example of
yy
installation and may look different from the
actual product.
12
ASSEMBLING AND PREPARING
Mounting on a table
WARNING
ENGLISH
1 Lift and tilt the TV into its upright position on a
table.
Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
When you adjust the angle, do not hold the
buttom of the TV frame as shown on the
following illustration, as may injure your fingers.
10 cm
10 cm
10 cm
10 cm
CAUTION
Disconnect the power cord first, and then move
or install the TV. Otherwise electric shock may
occur.
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
CAUTION
Do not place the TV near or on sources of
heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING
13
Using the Kensington security system
NOTE
-5
+20
The Kensington security system connector is
located at the back of the TV. For more information
of installation and using, refer to the manual
supplied with the Kensington security system or
visit http://www.kensington.com .
Connect the Kensington security system cable
between the TV and a table.
Front
Rear
Tidying cables
Gather and bind the cables with the supplied cable tie.
NOTE
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
ENGLISH
Tilt from +20 to -5 degrees up or down to
adjust the angle of the TV to suit your view.
14
ASSEMBLING AND PREPARING
Detaching the Stand
ENGLISH
M2252D
M2452D
1 Place the TV with the screen side down on a
flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage.
When detaching the stand to the TV,
yy
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
2 Turn the screw to the left, and then pull out the
Stand Base from the Stand Body.
3 Pull out the Stand Body from the TV.
ASSEMBLING AND PREPARING
M2752D
flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage.
When detaching the stand to the TV,
yy
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
2 Turn the screw to the left, and then pull out the
Stand Base from the Stand Body.
3 Remove 2 screws and pull out the Stand Body
from the TV.
ENGLISH
1 Place the TV with the screen side down on a
15
16
ASSEMBLING AND PREPARING
Mounting on a wall
5 Please use VESA standard as below.
ENGLISH
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
(optional)
10 cm
10 cm
784.8 mm (30.9 inch) and under
yy
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm
787.4 mm (31.0 inch) and above
yy
* Please use VESA standard wall mount pad
and screws.
100 x 100
M4
4
RW120
10 cm
10 cm
VESA (A x B)
yy
A
If you intend to mount the TV to a wall, attach Wall
mounting interface (optional parts) to the back of
the TV.
When you install the TV using the wall mounting
interface (optional parts), attach it carefully so it
will not drop.
1 Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2 If you use screw longer than standard, the TV
might be damaged internally.
3 If you use improper screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
4 VESA compatible only with respect to screw
mounting interface dimensions and mounting
screw specifications.
B
ASSEMBLING AND PREPARING
17
CAUTION
NOTE
Use the screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
yy
supplied with the wall mount.
ENGLISH
Disconnect the power cord first, and then
yy
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
yy
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
yy
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
18
WATCHING TV
WATCHING TV
ENGLISH
Turning the TV on for the first time
When you access the TV for the first time, the initial setting screen appears. Select a language and
customize the basic settings.
1 Connect the power cord to a power outlet.
2 Press
on the TV or power button on the remote control to turn the TV on.
The Standby Light is turned off.
NOTE
When the TV is in Power saving mode, the Standby Light turns amber.
3 The initial setting screen appears if you access the TV for the first time.
NOTE
If you do not operate the TV within 40 seconds when the setting menu screen appears, the setting
menus will disappear.
4 Follow the on-screen instructions to customize your TV according to your preferences.
Language
Selects a language for the display.

Mode Setting
Selects Home Use for the home environment.

Power Indicator

Country
Selects the Standby Light. If you select On, the TV turns on the Standby Light in
the front panel when the TV is off.
Selects a country to display.

Time Zone
Selects the time zone and daylight saving.
(When Russia is selected for Country)

Set Password
Set the password.

Auto Tuning
Scans and saves available programmes automatically.
WATCHING TV
19
NOTE
5 When the basic settings are complete, press OK.
NOTE
If you do not complete the initial setting, it will appear whenever you access the TV.
6 To turn the TV off, press
on the TV.
The Standby Light is turned on.
CAUTION
Disconnect the power cord from the power outlet when you do not use the TV for a long period of
time.
NOTE
You can also switch the TV from PC mode to TV mode, press TV/PC.
yy
You can also access Factory Reset by accessing OPTION in the main menus.
yy
ENGLISH
For those countries without confirmed DTV broadcasting standards, some DTV features might not
yy
work, depending on the DTV broadcasting environment.
To display images in the best quality for your home environment, select Home Use mode.
yy
Store Demo mode is suitable for the retail environment.
yy
If you select Store Demo mode, the previously customized settings will switch to the default
yy
settings of Store Demo mode in 2 minutes.
20
MAKING CONNECTIONS
MAKING CONNECTIONS
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input
yy
cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the
manual supplied with the connected device.
The external device connection may differ from the model.
yy
Connect external devices to the TV regardless of the order of the TV port.
yy
Connecting an antenna
Connect an antenna, cable or cable box to watch TV referring to the following. The illustrations may differ
from the actual accessories and an RF cable is optional.
Connect the TV to a wall antenna socket with an RF cable (75 ).
AV 1
ENGLISH
Connect various external devices to the TV and switch input modes to select an external device. For more
information about an external device’s connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
camcorders or cameras, gaming devices, and other external devices.
(Not Provided)
Outdoor Antenna
VHF Antenna
yy
UHF Antenna
yy
Wall Antenna Socket
NOTE
Use a signal splitter to use more than 2 TVs.
yy
If the image quality is poor, install a signal
yy
amplifier properly to improve the image
quality.
If the image quality is poor with an antenna
yy
connected, aim the antenna to the proper
direction.
Visit http://AntennaWeb.org for more
yy
information about the antenna and cable
connection.
CAUTION
Make sure not to bend the copper wire of
yy
the RF cable.
Copper wire
Complete all connections instructions
yy
between devices, and then connect the
power cord to the power outlet to prevent
damages to your TV.
MAKING CONNECTIONS
21
Connecting to a HD receiver, DVD, VCR player or Gaming device
HDMI connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external device
and the TV with the HDMI cable as shown on the following illustration.
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yy
Supported DTV Audio: MPEG, Dolby Digital.
yy
Supported HDMI Audio format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/19
yy
2k, DTS Not supported.)
Choose any HDMI input port to connect.
yy
It does not matter which port you use.
yy
(Not Provided)
DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device
ENGLISH
Connect a HD receiver, DVD, VCR player or Gaming device to the TV and select an appropriate input mode.
22
MAKING CONNECTIONS
HDMI to DVI connection
ENGLISH
Transmits the digital video signal from an external device to the TV. Connect the external device and the TV
with the HDMI to DVI cable as shown in the following illustration. To transmit an audio signal, connect an
optional audio cable.
NOTE
If you do not use an optional external speaker, connect the external device to the TV with the optional
audio cable.
(Not Provided)
(Not Provided)
DVD / Blu-Ray / HD Cable Box /
HD STB / Gaming device
MAKING CONNECTIONS
23
Component connection
NOTE
If cables are installed incorrectly, it could case the image to display in black and white or with distorted
yy
color.
Check to ensure the cable are matched with the corresponding color connection.
yy
(Not Provided)
(Not Provided)
DVD / Blu-Ray / HD Cable Box /
HD STB / Gaming device
ENGLISH
Transmits the analog video and audio signals from an external device to the TV. Connect the external
device and the TV with the component cable as shown on the following illustration. To display images by
using progressive scan, make sure to use the component cable.
24
MAKING CONNECTIONS
Composite connection
ENGLISH
Transmits the analog video and audio signals from an external device to the TV. Connect the external
device and the TV with the composite cable as shown on the following illustration.
NOTE
Check to ensure the cable are matched with the corresponding color connection.
(Not Provided)
DVD / Blu-Ray / HD Cable Box /
HD STB / Gaming device
MAKING CONNECTIONS
25
Connecting to an audio system
ENGLISH
Use an optional external audio system instead of the built-in speaker.
Headphone connection
Transmits the headphone signal from the TV to an external device. Connect the TV with the headphone as
shown on the following illustration.
NOTE
AUDIO menu items are disabled when connecting a headphone.
yy
When changing AV MODE with a headphone connected, the change is applied to video but not to
yy
audio.
Optical digital audio out is not available when connecting a headphone.
yy
Headphone impedance: 16
yy
Max audio output of headphone: 10 mW to 15 mW
yy
Headphone jack size: 0.35 cm
yy
(Not Provided)
Headphone
26
MAKING CONNECTIONS
Connecting to a USB
ENGLISH
Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB
memory card reader to the TV and access the USB menu to use various multimedia files.
or
USB
(Not Provided)
MAKING CONNECTIONS
27
Connecting to a PC
* Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn
on, without device configuration or user intervention.
NOTE
It is recommended to use the TV with the HDMI connection for the best image quality.
yy
If you do not use an optional external speaker, connect the PC to the TV with the optional audio
yy
cable.
If you turn the TV on when the set becomes cold, the screen may flicker. This is normal.
yy
Use a shielded signal interface cable, such as D-sub 15 pin signal cable and HDMI to DVI cable, with
yy
a ferrite core to maintain standard compliance for the product.
Some red, green, or blue spots may appear on the screen. This is normal.
yy
Connect the signal input cable and tighten it by turning the screws clockwise.
yy
Do not press the screen with your finger for a long time as this may result in temporary
yy
distortion on the screen.
Avoid displaying a fixed image on the screen for a long period of time to prevent image
yy
burn. Use a screensaver if possible.
NOTE
If you want to use HDMI-PC mode, you must set the input label to PC mode.
yy
The OSD (On Screen Display) is displayed on the screen as shown below.
yy
»»When turning the product on in HDMI input.
»»When switching to HDMI input.
Is the input connected to your PC?
Yes
No
Do not show message again.
If you select "Yes" the size and image quality are optimised for your PC.
yy
If you select "No" the size and image quality are optimised for the AV device (DVD player, set-top
yy
box, gaming device).
If you select "Do not show message again" this message does not appear until the TV is reset. You
yy
can change the set value in SETTINGS s INPUT s Input Label.
The values set for HDMI1/HDMI2 are saved independently.
yy
ENGLISH
Your TV supports the Plug & Play* feature and has the built-in speakers with Infinite Surround that
reproduces sound clearly with a rich bass.
28
MAKING CONNECTIONS
HDMI connection
ENGLISH
Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the
HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to
the TV with an HDMI connection.
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yy
If you want to use HDMI-PC mode, you must set the input label to PC mode.
yy
Supported DTV Audio: MPEG, Dolby Digital.
yy
Supported HDMI Audio format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/19
yy
2k, DTS Not supported.)
Choose any HDMI input port to connect.
yy
It does not matter which port you use.
yy
(Not Provided)
PC
MAKING CONNECTIONS
29
HDMI to DVI connection
NOTE
If you want to use HDMI-PC mode, you must set the input label to PC or DVI mode.
yy
If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable.
yy
(Not Provided)
(Not Provided)
PC
ENGLISH
Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the HDMI to DVI
cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable.
30
MAKING CONNECTIONS
RGB connection
ENGLISH
Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15
pin cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable.
NOTE
If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable.
(Not Provided)
PC
REMOTE CONTROL
31
REMOTE CONTROL
M2452D
M2752D
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
and
ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may
damage the remote control.
Make sure to point the remote control to the remote control sensor on the TV.
(POWER)
Turns the TV on or off.
(User Guide) (See p.34)
Accesses the User Guide
menu.
GUIDE
Shows programme guide.
INFO ⓘ
Views the information of the
currently program and the
screen.
LIST
Displays the programme
table.
SETTINGS
Accesses the main menus
or saves your input and exit
menus.
OK
Selects menus or options and
confirms your input.
(BACK)
Allows the user to move
return one step in an
interactive application, EPG
or other user interaction
function.
TV/RAD
Selects Radio, TV and DTV
programme.
RATIO
Resizes an image.
INPUT
Selects the input mode.
Number buttons
Enters numbers.
Q.VIEW
Returns to the previously
viewed programme.
Q.MENU
Accesses the quick menus.
Navigation buttons
Scrolls through menus or
options.
EXIT
Clears all on-screen displays
and returns to TV viewing from
any menu.
ENGLISH
M2252D
32
CUSTOMIZING SETTINGS
M2252D
M2452D
M2752D
ENGLISH
FAV
Displays the selected
favourite programme.
AD
Switches the Audio
Description On or Off.
PIP
Turns the PIP mode on or off.
(VOLUME)
Adjusts the volume level.
Coloured buttons
These buttons are used for
teletext (on TELETEXT
models only), Programme
edit.
USB Menu control
buttons
USB menu(Photo List and
Music List or Movie List).
Programme
Selects a programme.
PAGE
Moves to the previous or next
screen.
MUTE
Mutes all sounds.
Backlight
Adjusts the brightness of
the screen by controlling the
screen backlight.
SUBTITLE
Recalls your preferred subtitle
in digital mode.
Teletext buttons
These buttons are used for
teletext. For further details,
see the ‘Teletext’ section.
NOTE
On MHEG channel, you cannot adjust the backlight with the yellow or blue key.
CUSTOMIZING SETTINGS
33
CUSTOMIZING SETTINGS
ENGLISH
Accessing main menus
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to one of the following menus and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
4 When you are finished, press EXIT.
(BACK).
When you return to the previous menu, press
PICTURE
Adjusts the image size, quality or effect.
AUDIO
Adjusts the sound quality, effect or volume level.
SETUP
Sets up and edit programmes.
TIME
Sets the time, date or Timer feature.
LOCK
Locks or unlocks channels and programs.
OPTION
INPUT
MY MEDIA
Customizes the general settings.
Views the input sources with their labels.
Using integrated media feature.
Press RED button to access the Customer Support menus.
yy
Press GREEN Button to access the FAQ menus.
yy
Press OK( ) to set programme settings.
Customer Support
Customer Support
Using Customer Support feature.
Software Update
yy
Picture Test
yy
Sound Test
yy
Signal Test
yy
Product/Service Info.
yy
User Guide
yy
FAQ
Exit
FAQ
Shows answers to frequently asked
questions about TV viewing and sets
the related menus.
34
USING THE USER GUIDE
ENGLISH
USING THE USER GUIDE
Accessing User Guide menu.
Using the TV menu
Image shown may differ from your TV.
yy
User Guide
3
2
To use input device
1 Press SETTINGS to access the main menus.
2 Press the RED button to access the Customer
Support menus.
3 Press the Navigation button to scroll to User
To use Energy Saving feature
PROGRAMME Setting
option you want and press OK.
5 When you are finished, press EXIT.
When you return to the previous menu, press
(BACK).
Using the Remote Control
To set time options
OPTION
To set TV lock options
Advanced Function
To set language
Information
Guide and press OK.
4 Press the Navigation buttons to scroll to the
To use SUPER Energy Saving feature
PICTURE, SOUND Setting
To set country
1
1 Allows to select the category you want.
2 Allows to select the item you want.
You can use ꕌ/ꕍto move between pages.
3 Allows to browse the description of the
function you want from the index.
User Guide
1 OPTION > To set language
SETTING   OPTION  Language
You can select the language of the menu displayed on the screen and the
digital sound broadcasting.
yy Menu Language : Selects a language for the display text.
yy Audio Language [In Digital Mode Only] : Select the desired language
when watching digital broadcasting containg several
voice languages.
yy Subtitle Language [In Digital Mode Only] : Use the Subtitle function when
two or more subtitle languages are broadcast.
✎ If subtitle data in a selected language is not
broadcast, the default language subtitle will
be displayed.
PROGRAMME Setting
PICTURE, SOUND Setting
OPTION
Advanced Function
Information
1 Press
(User Guide) to access the User
Guide.
2
Zoom In
Close
SETTING   OPTION  Language
You can select the language of the menu displayed on the screen and the
digital sound broadcasting.
yy Menu Language : Selects a language for the display text.
yy Audio Language [In Digital Mode Only] : elect the desired language when
watching digital broadcasting containg several voice
languages.
yy Subtitle Language [In Digital Mode Only] : Use the Subtitle function when
two or more subtitle languages are broadcast.
✎ If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
2 Press the Navigation buttons to scroll to the
option you want and press OK.
3 When you are finished, press EXIT.
When you return to the previous menu, press
(BACK).
2
Zoom Out
Close
1 Shows the description of the selected menu.
You can use ꕌ/ꕍto move between pages.
2 Zooms in or out the screen.
MAINTENANCE
35
MAINTENANCE
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
Make sure to turn the power off and disconnect the power cord and all other cables first.
yy
When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
yy
outlet to prevent possible damage from lightning or power surges.
Screen and frame
To remove dust, wipe the surface with a dry and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a clean and dry cloth.
CAUTION
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
yy
scratches on the screen and image distortions.
Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners,
yy
lubricants, as these may damage the screen’s finish and cause discolorations.
Cabinet and stand
To remove dust, wipe the cabinet with a dry and soft cloth.
To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a
small amount of mild detergent.
CAUTION
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
yy
malfunction.
Do not use any chemicals as this may deteriorate the surface.
yy
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
ENGLISH
Cleaning Your TV
36
MAINTENANCE
Preventing “Image burn” or “Burn-in” on your TV screen
ENGLISH
If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become
yy
a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the
warranty.
If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the
yy
letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD)
yy
to prevent image burn.
TROUBLESHOOTING
37
TROUBLESHOOTING
ENGLISH
General
Problem
Resolution
Cannot control the TV with
the remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
yy Check if the batteries are still working and properly installed ( to , to ).
No image display and no
sound is produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
38
SPECIFICATIONS
SPECIFICATIONS
ENGLISH
M2252D
Panel
Video Signal
Screen Type
546.1 mm Wide (21.5 inch)
Visible diagonal size : 546.1 mm
Pixel Pitch
0.25 mm (H) x 0.25 mm (V)
Max. Resolution
1920 × 1080 @ 60 Hz
Recommended Resolution 1920 × 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 83 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization Type
Separate Sync, Digital
Input Connector
Power
TV, D-Sub Analog, PC Audio In, Component, CVBS,
HDMI*2, USB
Rated Voltage
19 V
Power Consumption
On Mode : 30 W (typ.)
Off Mode
0.4 W
AC/DC Adapter
Tilt
1.6 A
Manufacturer: Lien Chang, Model LCAP25A
Manufacturer: HONOR, Model ADS-40SG-19-2 19032G
Tilt Range
Dimensions (Width x Depth x Height)
Weight
-5 to 20°
With Stand
508.6 mm x 182.8 mm x 386.5 mm
3.6 kg
Without Stand
508.6 mm x 62.9 mm x 314.8 mm
3.1 kg
Environmental
conditions
Operating Temperature
Operating Humidity
10 °C to 35 °C
20 % to 80 %
Storage Temperature
Storage Humidity
-10 °C to 60 °C
5 % to 90 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
ENGLISH
M2452D
Panel
Video Signal
Screen Type
609.6 mm Wide (24 inch)
Visible diagonal size : 609.6 mm
Pixel Pitch
0.28 mm (H) x 0.28 mm (V)
Max. Resolution
1920 × 1080 @ 60 Hz
Recommended Resolution 1920 × 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 83 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization Type
Separate Sync, Digital
Input Connector
Power
TV, D-Sub Analog, PC Audio In, Component, CVBS,
HDMI*2, USB
Rated Voltage
19 V
Power Consumption
On Mode : 33 W (typ.)
Off Mode 0.4 W
AC/DC Adapter
Tilt
2.0 A
Manufacturer: LITE-ON, Model PA-1650-64
Manufacturer: LG Innotek, Model PSAB-L101A
Tilt Range
Dimensions (Width x Depth x Height)
Weight
-5 to 20°
With Stand
566.9 mm x 182.8 mm x 417.4 mm
3.4 kg
Without Stand
566.9 mm x 62.9 mm x 345.9 mm
2.9 kg
Environmental
conditions
39
Operating Temperature
Operating Humidity
10 °C to 35 °C
20 % to 80 %
Storage Temperature
Storage Humidity
-10 °C to 60 °C
5 % to 90 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
40
SPECIFICATIONS
ENGLISH
M2752D
Panel
Video Signal
Screen Type
685.65 mm Wide (27 inch)
Visible diagonal size : 685.65 mm
Pixel Pitch
0.31 mm (H) x 0.31 mm (V)
Max. Resolution
1920 × 1080 @ 60 Hz
Recommended Resolution 1920 × 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 83 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization Type
Separate Sync, Digital
Input Connector
Power
TV, D-Sub Analog, PC Audio In, Component, CVBS,
HDMI*2, USB
Rated Voltage
19 V
Power Consumption
On Mode : 35 W (typ.)
Off Mode
0.4 W
AC/DC Adapter
Tilt
2.0 A
Manufacturer: LITE-ON, Model PA-1650-64
Manufacturer: LG Innotek, Model PSAB-L101A
Tilt Range
Dimensions (Width x Depth x Height)
Weight
-5 to 20°
With Stand
641.3 mm x 199.4 mm x 458.8 mm
5.55 kg
Without Stand
641.3 mm x 53 mm x 391.1 mm
4.6 kg
Environmental
conditions
Operating Temperature
Operating Humidity
10 °C to 35 °C
20 % to 80 %
Storage Temperature
Storage Humidity
-10 °C to 60 °C
5 % to 90 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
41
SPECIFICATIONS
RGB (PC) / HDMI (PC) supported mode
Component supported mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720 x 400
31.468
70.080
720 x 480
15.730
59.940
640 x 480
31.469
59.940
720 x 480
15.750
60.000
640 x 480
37.500
75.000
720 x 576
15.625
50.000
800 x 600
37.879
60.317
720 x 480
31.470
59.940
800 x 600
46.875
75.000
720 x 480
31.500
60.000
1024 x 768
48.363
60.004
720 x 576
31.250
50.000
1024 x 768
60.023
75.029
1280 x 720
44.960
59.940
1152 x 864
67.500
75.000
1280 x 720
45.000
60.000
1280 x 720
45.000
60.000
1280 x 720
37.500
50.000
33.720
59.940
1280 x 800
49.702
59.810
1920 x 1080
1280 x 1024
63.981
60.020
1920 x 1080
33.750
60.000
1280 x 1024
79.976
75.025
1920 x 1080
28.125
50.000
1400 x 1050
65.317
59.978
1920 x 1080
56.250
50.000
67.432
59.940
67.500
60.000
1440 x 900
55.935
59.887
1920 x 1080
1600 x 900
60.000
60.000
1920 x 1080
1680 x 1050
64.674
59.883
1680 x 1050
65.290
59.954
1920 x 1080
67.500
60.000
HDMI (DTV) supported mode
Component port connecting information
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720 x 480
31.469
31.500
59.940
60.000
720 x 576
31.250
50.000
1280 x 720
37.500
50.000
1280 x 720
44.960
45.000
59.940
60.000
1920 x 1080
33.720
33.750
59.940
60.000
1920 x 1080
28.125
50.000
1920 x 1080
27.000
24.000
1920 x 1080
33.750
30.000
1920 x 1080
56.250
50.000
1920 x 1080
67.430
67.500
59.940
60.000
Resolution
Component ports on the
TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
ENGLISH
Resolution
42
SPECIFICATIONS
NOTE
ENGLISH
Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may
yy
become permanently imprinted on the screen. Use a screen saver when possible.
There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode.
yy
Change the PC mode to another resolution or change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic
card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic
card.
The synchronization input waveform for Horizontal and Vertical frequencies are separate.
yy
Connect the signal cable from the TV output port of the PC to the RGB (PC) port of the TV or the
yy
signal cable from the HDMI output port of the PC to the HDMI/DVI IN port on the TV.
Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included
yy
with the TV).
If using a sound card, adjust PC sound as required.
yy
If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only
yy
one of either RGB or HDMI/DVI IN to display the PC output on the TV.
If the graphic card on the PC does output analogue and digital RGB simultaneously, set the TV to
yy
either RGB or HDMI. (The other mode is set to Plug and Play automatically by the TV.)
DOS mode may not work depending on the video card if you use an HDMI to DVI cable.
yy
If you use too long an RGB-PC cable that is too long, there may be interference on the screen. We
yy
recommend using under 5 m of cable. This provides the best picture quality.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner’s Manual (CD) in an
accessible place for future reference.
The model and serial number of the TV is
located on the back and one side of the
TV. Record it below should you ever need
service.
MODEL
SERIAL
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
Download PDF