LG | M2380D-PT | LG M2380DF-PT Owner’s Manual

ENGLISH
OWNER’S MANUAL
LED LCD MONITOR TV
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR TV MODELS
M2380D
M2380DF
www.lg.com
CONTENTS
PREPARATION
CONTENTS
FRONT PANEL CONTROLS..................................... 4
BACK PANEL INFORMATION.................................. 5
STAND INSTALLATION
M2380D................................................................. 6
M2380DF............................................................... 7
DETACHING STAND
M2380D.................................................................8
M2380DF............................................................... 9
DETACHING STAND BODY(Only M2380D)...10
WALL MOUNT: HORIZONTAL INSTALLATION.........11
DESKTOP PEDESTAL INSTALLATION.................12
POSITIONING YOUR DISPLAY...............................13
LOCATION.....................................................................13
KENSINGTON SECURITY SYSTEM...................... 14
EXTERNAL EQUIPMENT SETUP
ANTENNA CONNECTION....................................... 15
HD RECEIVER SETUP................................................16
DVD SETUP...................................................................19
VCR SETUP...................................................................21
DIGITAL AUDIO OUT SETUP................................ 23
USB SETUP..................................................................24
HEADPHONE SETUP............................................... 25
OTHER A/V SOURCE SETUP............................... 26
PC SETUP.....................................................................27
BACK COVER FOR WIRE ARRANGEMENT..... 30
SUPPORTED DISPALY RESOLUTION................ 30
WATCHING TV / PROGRAMME
CONTROL
REMOTE CONTROL KEY FUNCTIONS.............. 32
TURNING ON THE TV............................................. 34
PROGRAMME SELECTION.................................... 34
VOLUME ADJUSTMENT......................................... 34
QUICK MENU............................................................. 35
ON SCREEN MENUS SELECTION AND
ADJUSTMENT............................................................ 36
AUTO PROGRAMME TUNING...............................37
MANUAL PROGRAMME TUNING
(IN DIGITAL MODE)......................................... 38
MANUAL PROGRAMME TUNING
2
(IN ANALOGUE MODE).................................. 39
PROGRAMME EDIT....................................................41
IN DTV/RADIO MODE.............................................. 42
IN TV MODE................................................................ 43
SOFTWARE UPDATE............................................... 44
DIAGNOSTICS............................................................ 46
SELECTING THE PROGRAMME LIST.................47
FAVOURITE PROGRAMME SETUP..................... 48
INPUT LIST.................................................................. 49
EPG (ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
Switch on EPG............................................................ 50
Select a programme................................................. 50
Button Function in NOW/NEXT Guide Mode.....51
Button Function in 7 Day Guide Mode..................51
Button Function in Date Change Mode.............. 52
Button Function in Extended Description Box.. 52
Button Function in Remind Setting Mode......... 53
Button Function in Schedule List Mode............. 53
MHEG (MULTIMEDIA AND
HYPERMEDIA INFORMATION CODING
EXPERT GROUP) (IN DIGITAL MODE)
(ONLY NEW ZEALAND)
Switch on MHEG........................................................ 54
Select a programme................................................. 54
Button Function in Listing Mode........................... 55
Button Function in NOW/NEXT Mode................ 55
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL... 56
PICTURE WIZARD.................................................... 58
ꕫ ENERGY SAVING................................................ 59
PRESET PICTURE SETTINGS............................... 60
MANUAL PICTURE ADJUSTMENT......................61
PICTURE IMPROVEMENT TECHNOLOGY........ 62
EXPERT PICTURE CONTROL............................... 63
PICTURE RESET........................................................ 66
SCREEN SETUP FOR PC MODE..........................67
SOUND CONTROL
TIME SETTING
CLOCK SETUP.............................................................81
AUTO ON/OFF TIME SETTING............................ 82
SLEEP TIMER SETTING.......................................... 83
OPTION SETTING
COUNTRY SELECTION........................................... 84
LANGUAGE SELECTION
(IN DIGITAL MODE ONLY).............................. 85
AUDIO DESCRIPTION
(IN DIGITAL MODE ONLY).............................. 86
DATA SERVICE............................................................87
INPUT LABEL............................................................. 88
POWER INDICATOR................................................. 89
DEMO MODE.............................................................. 90
MODE SETTING...........................................................91
INITIALIZING(RESET TO ORIGINAL FACTORY
SETTINGS).........................................................................92
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM.................... 93
BLOCK PROGRAMME............................................. 94
PARENTAL CONTROL
(IN DIGITAL MODE ONLY)............................. 95
INPUT BLOCK............................................................ 96
TO USE A USB DEVICE
WHEN CONNECTING A USB DEVICE............... 98
PHOTO LIST.............................................................. 100
MUSIC LIST...............................................................106
MOVIE LIST.................................................................110
DIVX REGISTRATION CODE.................................. 117
DEACTIVATION..........................................................118
CONTENTS
AUTO VOLUME LEVELER........................................71
CLEAR VOICE II..........................................................72
BALANCE.....................................................................73
PRESET SOUND SETTINGS-SOUND MODE....74
PRESET SOUND SETTINGS-USER MODE........75
Surround X....................................................................75
AUDIO RESET.............................................................76
DIGITAL AUDIO OUT................................................ 77
TV SPEAKERS ON / OFF SETUP.........................78
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)......79
STEREO RECEPTION (IN ANALOGUE MODE ONLY).... 80
SPEAKER SOUND OUTPUT SELECTION........ 80
KEY LOCK.....................................................................97
TELETEXT
SWITCH ON/OFF......................................................119
SIMPLE TEXT..............................................................119
TOP TEXT....................................................................119
FASTEXT.....................................................................120
SPECIAL TELETEXT FUNCTION.........................120
DIGITAL TELETEXT
TELETEXT WITHIN DIGITAL SERVICE...............121
TELETEXT IN DIGITAL SERVICE..........................121
APPENDIX
TROUBLESHOOTING.............................................122
MAINTENANCE........................................................125
PRODUCT SPECIFICATIONS...............................126
IR CODES................................................................... 127
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup........................................................128
Type of Connector; D-Sub 9-Pin Male..............128
RS-232C Configurations.......................................128
Set ID............................................................................129
LICENSES
LICENSES...................................................................135
3
PREPARATION
FRONT PANEL CONTROLS
■■ This is a simplified representation of the front panel. The image shown may be somewhat different from
your Monitor set.
PREPARATION
M2380D
M2380DF
1
1
9
2
3
4
1
IR receiver (Remote controller receiver)
2
INPUT Button
3
MENU Button
4
OK Button
5
VOLUME Button
6
PROGRAMME Button
7
Power Button
5
6
8 Power Indicator
Illuminates blue when the set is switched on.
Note: You can adjust Power indicator in the OPTION menu.
9
4
WOOFER
7
8
BACK PANEL INFORMATION
■■ This is a simplified representation of the back panel. The image shown may be somewhat different from
your Monitor set.
M2380DF
1
2
6
3
7
8
1 DC ADAPTER PORT
Connect to the power cord socket.
2 HDMI INPUT
Connect a HDMI signal to HDMI IN or DVI
(VIDEO) signal to HDMI IN with DVI to HDMI
cable.
3 OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment. Connect to a Digital Audio
Component.
Use an Optical audio cable.
4 RGB/DVI AUDIO INPUT
Connect the audio from a PC.
5 HEADPHONE SOCKET
Plug the headphone into the headphone socket.
4
9
PREPARATION
M2380D
5
10
11
6 RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
7 RGB INPUT (PC)
Connect the output from a PC.
8 USB Input
9 COMPONENT INPUT
Connect a component video/audio device to
these jacks.
10 AV(AUDIO/VIDEO) INPUT
Connect audio/video output from an external
device to these jacks.
11 ANTENNA / CABLE INPUT
Connect over-the-air signals to this jack.
5
PREPARATION
M2380D
STAND INSTALLATION
■■ The image shown may be somewhat different from your Monitor set.
Carefully place the product screen side down on a
cushioned surface that will protect Monitor set and
screen from damage.
2
Insert the Stand Base into the Monitor set.
PREPARATION
1
Stand Base
3
Use a Coin on the bottom of the stand base
and turn the screw clockwise to tighten.
Coin
6
M2380DF
STAND INSTALLATION
■■ The image shown may be somewhat different from your Monitor set.
Carefully place the product screen side down on a
cushioned surface that will protect Monitor set and
screen from damage.
2
Insert the Stand Base into the Monitor set.
PREPARATION
1
Stand Base
3
Use a Coin on the bottom of the stand base
and turn the screw clockwise to tighten.
Coin
7
PREPARATION
M2380D
DETACHING STAND
■■ The image shown may be somewhat different from your Monitor set.
Place the set screen side down on a cushion
or soft cloth.
2
Detach the Monitor set to the Stand Base by
turning the screw to the left.
Turn the screw by using a Coin.
PREPARATION
1
Coin
Stand Base
3
8
Pull the stand base.
M2380DF
DETACHING THE STAND
■■ The image shown may be somewhat different from your Monitor set.
Place the set screen side down on a cushion
or soft cloth.
2
Detach the Monitor set to the Stand Base by
turning the screw to the left.
Turn the screw by using a Coin.
PREPARATION
1
Coin
Stand Base
3
Pull the stand base.
9
PREPARATION
DETACHING STAND BODY(Only M2380D)
■ The image shown may be somewhat different from your Monitor set.
■ Remove the Stand Body in the same way as the following when using it as a Wall Hook.
PREPARATION
1. Remove the screw 2 point.
2. Pull the stand body.
3. Assemble the screw 2 point
Screw
10
WALL MOUNT: HORIZONTAL INSTALLATION
■■ The image shown may be somewhat different from your Monitor set.
For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
PREPARATION
10 cm
10 cm
10 cm
If you intend to mount the set to a wall, attach Wall mounting interface (optional parts) to the back of
the Montort set.
When you install the set using the wall mounting interface (optional parts), attach it carefully so it will
not drop.
1. Be sure to use screws and a wall mount that meet VESA standards.
2. Using screws longer than those recommended might damage the product.
3. Using screws that do not meet VESA standards might either damage the product or result in it
coming away from the wall. We will not be held responsible for any damage resulting from failure
to follow these instructions.
4. VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications
5. Please use VESA standard as below.
5-1) 784.8 mm (30.9 inch) and under
* Wall Mount bracket Thickness : 2.6 mm
* Screw: Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm
5-2) 787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad and screws.
< Screw Mounting Interface Dimensions >
Model
M2380D
M2380DF
VESA (A x B)
75 x 75
Wall mount
bracket (optional)
RW120
Wall Mount
bracket
11
PREPARATION
DESKTOP PEDESTAL INSTALLATION
■■ The image shown may be somewhat different from your Monitor set.
For proper ventilation, allow a clearance of 10 cm on each side and from the wall.
PREPARATION
M2380D
10 cm
10 cm
10 cm
10 cm
M2380DF
10 cm
10 cm
10 cm
12
10 cm
POSITIONING YOUR DISPLAY
■ The image shown may be somewhat different from your Monitor set.
Adjust the position of the panel in various ways for maximum comfort.
* Tilt range
10°
M2380D
-5°
10°
PREPARATION
-5°
M2380DF
LOCATION
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
WARNING
■ When adjusting the angle of the
screen, do not put your finger(s) in
between the head of the monitor and
the stand body or woofer.
You can hurt your finger(s).
M2380DF
13
PREPARATION
KENSINGTON SECURITY SYSTEM
PREPARATION
- The product is equipped with a Kensington Security System connector on the back panel. Connect
the Kensington Security System cable as shown below.
- For detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.
For further information, contact http://www.kensington.com, the internet homepage of the
Kensington company. Kensington sells security systems for expensive electronic equipment such as
notebook PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the product feels cold to the touch, there may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with product.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor’s performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
M2380D
14
M2380DF
EXTERNAL EQUIPMENT SETUP
■■ To prevent damage do not connect to the mains outlet until all connections are made between the
devices.
ANTENNA CONNECTION
■■ For optimum picture quality, adjust antenna direction.
■■ An antenna cable and converter are not supplied.
Multi-family Dwellings / Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 Ω)
Outdoor
Antenna
Antenna
EXTERNAL EQUIPMENT SETUP
Wall
Antenna
Socket
Single-family Dwellings / Houses
(Connect to wall jack for outdoor antenna)
UHF
Signal
Amplifier
VHF
■■ In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown
above.
■■ If signal needs to be split for two sets, use an antenna signal splitter for connection.
15
EXTERNAL EQUIPMENT SETUP
■■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■■ The image shown may be somewhat different from your Monitor set.
HD RECEIVER SETUP
Connecting with a component cable
EXTERNAL EQUIPMENT SETUP
1
Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO
jacks on the Monitor set.
2
Connect the audio output of the digital set-top
box to the COMPONENT IN AUDIO jacks on the
set.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top
box.)
4
1
Select COMPONENT input source using the INPUT
button on the remote control
►►HDMI Audio Supported format : Dolby Digital, PCM
►►DTS Audio format is not supported.
16
Signal
Component
HDMI
480i / 576i
YES
No
480p / 576p
YES
YES
720p / 1080i
YES
YES
1080p
YES
(50 Hz / 60Hz only)
YES
(24 Hz / 30 Hz / 50Hz / 60Hz)
2
Connecting a set-top box with a HDMI cable
Connect the digital set-top box to HDMI/DVI IN 1 or
HDMI/DVI IN 2 jack on the Monitor set.
2
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top
box.)
3
Select HDMI 1 or HDMI 2 input source using the
INPUT button on the remote control.
1
EXTERNAL EQUIPMENT SETUP
1
! NOTE
►Check
►
that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed
HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
17
EXTERNAL EQUIPMENT SETUP
Connecting with an HDMI to DVI cable
EXTERNAL EQUIPMENT SETUP
1
Connect the digital set-top box to HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the Monitor set.
2
Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the
Monitor set.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote control.
1
18
2
DVD SETUP
Connecting with a component cable
Connect the video outputs (Y, PB, PR) of the DVD
to the COMPONENT IN VIDEO jacks on the
Monitor set.
2
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO jacks on the Monitor set.
3
Turn on the DVD player, insert a DVD.
4
Select Component input source using the INPUT
button on the remote control.
5
1
Refer to the DVD player's manual for operating
instructions.
2
EXTERNAL EQUIPMENT SETUP
1
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the Monitor set
Video output ports on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
19
EXTERNAL EQUIPMENT SETUP
When connecting HDMI cable
EXTERNAL EQUIPMENT SETUP
1
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the
Monitor set.
2
Select HDMI 1 or HDMI 2 input source
using the INPUT button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
1
! NOTE
►Check
►
that your HDMI cable is a high speed HDMI cable. If the HDMI cables are not high
speed, flickering or no screen display can result.
20
VCR SETUP
■■ To avoid picture noise (interference), allow adequate distance between the VCR and Monitor set.
Connecting with a RF cable
2
Wall Jack
Antenna
1
Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the Monitor set.
2
Connect the antenna cable to the ANT IN socket of the VCR.
3
Press the PLAY button on the VCR and match the appropriate channel between the set and
EXTERNAL EQUIPMENT SETUP
1
VCR for viewing.
21
EXTERNAL EQUIPMENT SETUP
Connecting with a RCA cable
1
Connect the AUDIO/VIDEO jacks between Monitor
set and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red).
EXTERNAL EQUIPMENT SETUP
2
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR Owner’s manual.)
3
Select AV input source using the INPUT button on
the remote control.
! NOTE
►If
► you have a mono VCR, connect the audio cable from the VCR to the AUDIO L / MONO
jack of the Monitor set.
22
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
Connect one end of an optical cable to the Monitor set Digital Audio (Optical) Output port.
2
Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.
3
Set the “TV Speaker option - Off ” in the AUDIO menu. (P. 78)
Refer to the external audio equipment instruction manual for operation.
EXTERNAL EQUIPMENT SETUP
1
1
2
CAUTION
►Do
► not look into the optical output port. Looking at the laser beam may damage your vision.
23
EXTERNAL EQUIPMENT SETUP
USB SETUP
1
Connect the USB device to the USB IN jack on the side of Monitor set.
2
After connecting the USB IN jack, you use the USB function. (s p.98)
EXTERNAL EQUIPMENT SETUP
Memory Stick
24
USB Cable
HEADPHONE SETUP
You can listen the sound through the headphone.
1
Plug the headphone into the headphone socket.
2
To adjust the headphone volume, press the
+ or - button. If you press the MUTE button,
EXTERNAL EQUIPMENT SETUP
the sound from the headphone is switched off.
! NOTE
►► AUDIO menu items are disabled when connecting a headphone.
►► Optical Digital Audio Out is not available when connecting a headphone.
25
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
EXTERNAL EQUIPMENT SETUP
1
Connect the AUDIO / VIDEO jacks between set and external equipment. Match the jack
colours. (Video = yellow, Audio Left = white, and Audio Right = red)
2
Select AV input source with using the INPUT button on the remote control.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
Camcorder
Video Game Set
1
26
PC SETUP
When using the remote control, aim it at the remote control sensor on the Monitor set.
When connecting with a D-sub 15 pin cable
Connect the signal cable from the monitor output
socket of the PERSONAL COMPUTER to the RGB
IN(PC) input socket of the Monitor set.
2
Connect the audio cable from the PC to the
AUDIO IN (RGB/DVI) sockets of the Monitor set.
3
Press the INPUT button to select RGB.
4
Switch on the PC, and the PC screen appears on
the Monitor set.
The set can be operated as a PC monitor.
2
1
EXTERNAL EQUIPMENT SETUP
1
! NOTE
►Connect
►
the signal input cable and tighten it by turning
the screws clockwise.
27
EXTERNAL EQUIPMENT SETUP
Connecting with an HDMI to DVI cable
1
Connect the DVI output of the PC to the HDMI/
DVI IN1 or HDMI/DVI IN2 jack on the Monitor set.
EXTERNAL EQUIPMENT SETUP
2
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the Monitor set.
3
Turn on the PC and the Monitor set.
4
Select HDMI 1 or HDMI 2 input source using the
1
2
INPUT button on the remote control.
! NOTE
►Connect
►
the signal input cable and tighten it by turning
the screws clockwise.
►If
► you want to use HDMI-PC mode, you must set the input label to the pc mode.
28
Connecting with an HDMI to HDMI cable
Connect the HDMI output of the PC to the HDMI/
2
Turn on the PC and the Monitor set.
3
Select HDMI 1 or HDMI 2 input source using the
DVI IN1 or HDMI/DVI IN2 jack on the Monitor set.
INPUT button on the remote control.
1
EXTERNAL EQUIPMENT SETUP
1
! NOTE
►Check
►
that your HDMI cable is a high speed HDMI cable. If the HDMI cables are not high
speed, flickering or no screen display can result.
►If
► you want to use HDMI-PC mode, you must set the input label to the PC mode.
29
EXTERNAL EQUIPMENT SETUP
BACK COVER FOR WIRE ARRANGEMENT
Tie cables together with a cable management as shown in the illustration.
M2380D
2380DF
EXTERNAL EQUIPMENT SETUP
SUPPORTED DISPALY RESOLUTION
RGB[PC] mode
30
HDMI/DVI - PC mode
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720 x 400
31.468
70.08
720 x 400
31.468
70.08
640 x 480
31.469
59.94
640 x 480
31.469
59.94
640 x 480
37.5
75
640 x 480
37.5
75
800 x 600
37.879
60.317
800 x 600
37.879
60.317
800 x 600
46.875
75.0
800 x 600
46.875
75.0
1024 x 768
48.363
60.0
1024 x 768
48.363
60.0
1024 x 768
60.023
75.029
1024 x 768
60.023
75.029
1152 x 864
67.500
75.000
1152 x 864
67.500
75.000
1280 x 1024
63.981
60.02
1280 x 1024
63.981
60.02
1280 x 1024
79.976
75.025
1280 x 1024
79.976
75.025
1680 x 1050
64.674
59.883
1680 x 1050
64.674
59.883
1680 x 1050
65.290
59.954
1680 x 1050
65.290
59.954
1600 x 1200
75.0
60.0
1600 x 1200
75.0
60.0
1920 x 1080
67.5
60
1920 x 1080
67.5
60
HDMI/DVI - DTV mode
COMPONENT mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720 x 480
31.469
31.5
59.94
60
720 x 576
31.25
50
1280 x 720
37.500
50
1280 x 720
44.96
45
59.94
60
1920 x 1080
33.72
33.75
59.94
60
1920 x 1080
28.125
50.00
1920 x 1080
27
24
1920 x 1080
33.75
30.00
1920 x 1080
56.250
50
1920 x 1080
67.43
67.5
59.94
60
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720 x 480
720 x 480
720 x 576
720 x 480
720 x 480
720 x 576
1280 x 720
1280 x 720
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
15.73
15.75
15.625
31.47
31.50
31.25
44.96
45.00
37.50
33.72
33.75
28.125
56.25
67.432
67.5
59.94
60.00
50.00
59.94
60.00
50.00
59.94
60.00
50.00
59.94
60.00
50.00
50
59.94
60.00
EXTERNAL EQUIPMENT SETUP
Resolution
! NOTE
►Avoid
►
keeping a fixed image on the Monitor
set screen for prolonged periods of time.
The fixed image may become permanently
imprinted on the screen use a screen saver
when possible.
►►There may be interference relating to resolution, vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution or change the refresh rate to another
rate or adjust the brightness and contrast on the
menu until the picture is clear. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer of the PC graphic card.
►►The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
►►Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of
the Monitor set or the signal cable from the
HDMI output port of the PC to the HDMI/DVI IN
port on the Monitor set.
►►Connect the audio cable from the PC to the
Audio input on the Monitor set. (Audio cables
are not included with the Monitor set).
►►If using a sound card, adjust PC sound as
required.
►►If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI/DVI IN
to display the PC output on the Monitor set.
►►If the graphic card on the PC does output analogueand digital RGB simultaneously,
Monitor set the Monitor set to either RGB or
HDMI. (The other mode is set to Plug and Play
automatically by the Monitor set.)
►►DOS mode may not work depending on the
video card if you use an HDMI to DVI cable.
►►If you use too long an RGB-PC cable that is too
long, there may be interference on the screen.
We recommend using under 5m of cable. This
provides the best picture quality.
31
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the Monitor set.
(POWER) Switches the set on from standby or off to standby.
ENERGY A
djust the Energy Saving mode of the Monitor set.
SAVING (► P. 59)
TV/PC Selects TV or PC mode.
WATCHING TV / PROGRAMME CONTROL
INPUT External input mode rotates in regular sequence.
TV/RAD Selects Radio, TV and DTV channel.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table. (► P. 47)
Q.VIEW Returns to the previously viewed programme.
MENU Selects a menu.
Clears all on-screen displays and returns to Monitor
set viewing from any menu. (► P. 36)
GUIDE Shows programme schedule. (► P. 50 to 53)
Q. MENU Select the desired quick menu source. (Aspect Ratio,
Clear Voice II , Picture Mode, Sound Mode, Audio,
Sleep Timer, Favourite, USB Device). (►P.35)
THUMBSTICK Allows you to navigate the on-screen menus and
(Up/Down/Left/Right)
adjust the system settings to your preference.
OK Accepts your selection or displays the current mode.
BACK Allows the user to move return one step in an interactive application, EPG or other user interaction
function.
INFO
Shows the present screen information.
EXIT Clears all on-screen displays and returns to Monitor
set viewing from any menu
Coloured These buttons are used for teletext (on TELETEXT
buttons models only) , Programme edit.
32
VOLUME Adjusts the volume.
UP/DOWN
FAV Displays the selected favourite programme.
(► P. 48)
MARK Check and un-check programmes in the USB menu.
RATIO Selects your desired Aspect Ratio of picture.
Programme Selects a programme.
UP/DOWN
PAGE Move from one full set of screen information to the next
UP/DOWN one.
1 TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.
(► P. 119 to 120)
SUBTITLE Recalls your preferred subtitle in digital mode.
USB Menu USB menu(Photo List and Music List or Movie List ).
control
buttons
Auto Config. Automatically adjusts picture position and minimizes image instability.
WATCHING TV / PROGRAMME CONTROL
MUTE Switches the sound on or off.
Installing Batteries
1
■■ Open the battery compartment cover on the back side and
install the batteries matching correct polarity (+with +,-with
-)
■■ Install two 1.5 V AAA batteries. Don’t mix old or used batteries with new ones.
■■ Close cover.
■■ To remove the batteries, perform the installation actions in
reverse.
33
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
--When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the ꔰ / I, INPUT or Pꕭꕮ button on the TV or press the
POWER, INPUT, Pꕭꕮor NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
Mode Setting, Country, Time Zone(Only Australia), Auto Tuning.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. Press the BACK button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work,
depending on the DTV broadcasting environment.
d. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data,
“Store Demo” mode initializes the product to the image quality set by us after a certain period of time.
f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION menu.
PROGRAMME SELECTION
1
Press the P ꕭ ꕮ or NUMBER buttons to select a programme number.
VOLUME ADJUSTMENT
1
Press the
2
If you wish to switch the sound off, press the MUTE button.
+ or - button to adjust the volume.
You can cancel this function by pressing the MUTE,
34
+ , - button.
QUICK MENU
Your Monitor set OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
ꔬ Aspect Ratio: Selects your desired picture format.For Zoom Setting, select 14:9, Zoom
and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes
back to Q.Menu.
ꕩ Sound Mode: It is a feature to automatically
set the sound combination which it deems the
best for the images being watched. Selects
your desired Sound Mode.
ꕤ Clear Voice II: By differentiating the human
sound range from others, it helps users listen
to human voices better.
ꔑ Sleep Timer: Sets the sleep timer.
◄
PR
Favourite: Selects the favourite programme.
ꔧ USB Device: Selects “Eject” in order to eject
USB device.
Aspect Ratio
►
16:9
1
2
WATCHING TV / PROGRAMME CONTROL
ꕧ Picture Mode: Selects your desired Picture
Mode.
ꕁ Audio: Selects the sound output.
Display each menu.
Select your desired Source.
3
• Press the BACK button to move to the previous menu screen.
35
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual.
SETUP
Move
OK
PICTURE
Move
AUDIO
OK
Manual Tuning
Picture Wizard
Programme Edit
ꕫ Energy Saving : Off
Balance Picture Mode : Standard
Sound Mode : Music
• Backlight 70
• Surround X • Contrast 90
• Treble 50
• Brightness 50
• Bass 50
• Sharpness • Reset
: ON
Diagnostics
70
Auto Volume : Off
Clear Voice II : Off ꕤ3
OK
Aspect Ratio Software Update : 16:9
Move
Auto Tuning
v
WATCHING TV / PROGRAMME CONTROL
OPTION
Move
0
v
TIME
OK
Move
Audio Language
: English
Clock
Subtitle Language : English
Off Time : Off
On Time : Off
Sleep Timer : Off
Disabled Assistance
: ­- -
Country : Off
SETUP
PICTURE
AUDIO
TIME
OPTION
LOCK
INPUT
USB
OK
Input Label
Set ID
:1
Power Indicator
: On
Demo Mode
: Off
v
LOCK
Move
INPUT
OK
Set Password
1
2
3
Move
OK
USB
Antenna
Photo List
Lock System : Off
AV
Music List
• Block Programme
Component
Movie List
• Parental Guidance
RGB
DivX Reg. Code
• Input Block
HDMI1
Deactivation
Key Lock
: Off
HDMI2
MENU
Move
OK
Display each menu.
Select a menu item.
Move to the pop up menu.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
36
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 1000. But the number may differ slightly
depending on broadcasting signals.
Move
SETUP
OK
ꔋ
Auto
AutoTuning
Tuning Manual Tuning
Programme Edit
Software Update Move
Auto
AutoTuning
Tuning : ON
Diagnostics
➩
OK
ꔋ
Manual Tuning
Programme Edit
Software Update Diagnostics
: ON
Check your antenna connection.
The previous channel information
will be updated during Auto
Tuning.
□ Automatic Numbering
Start
Close
1
2
MENU
Select SETUP.
Select Auto Tuning.
3
Select Start.
4
Run Auto tuning.
• Use NUMBER buttons to input a
4-digit password in Lock System ‘On’.
• If you wish to keep on auto tuning
select Start using the ꕭꕮ button.
Then, press the OK button. Otherwise
select Close.
• Automatic Numbering: Decide whether
to use the programme numbers as
sent by broadcasting stations for tuning.
WATCHING TV / PROGRAMME CONTROL
SETUP
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
37
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
SETUP
Move
SETUP
OK
Auto Tuning
Manual
ManualTuning
Tuning ꔋ
Programme Edit
WATCHING TV / PROGRAMME CONTROL
Software Update Move
Auto Tuning
: ON
➩
Diagnostics
Manual
ManualTuning
Tuning OK
◄
DTV
ꔋ
s
Your receiver will add this channel
Programme Edit
to your channel list.
Software Update VHF CH. : ON
30
Diagnostics
Bad
normal
Good
Add
Close
1
2
MENU
• Use NUMBER buttons to input a
4-digit password in Lock System ‘On’.
Select SETUP.
Select Manual Tuning.
3
Select DTV.
4
Select the desired channel number.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
38
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
SETUP
OK
Auto Tuning
Move
Auto Tuning
ꔋ
Manual
ManualTuning
Tuning Programme Edit
Software Update : ON
Manual
ManualTuning
Tuning ➩
Programme Edit
Software Update Diagnostics
CI Information
CI Information
◄
ꔋ
Storage
►
TV
3
System
: ON
Band
B/B
V/UHF
Channel
0
Search
◄►
Name
C 02
Store
Close
1
2
MENU
6
Select SETUP.
Select V/UHF or Cable.
Select Manual Tuning.
3
5
or
or
Select the desired
channel number.
8
Select TV.
4
7
Commence searching..
Select the desired
programme number on.
9
WATCHING TV / PROGRAMME CONTROL
Diagnostics
OK
Select Store.
Select a TV system.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
•Use NUMBER buttons to input a 4-digit password in Lock System ‘On’.
•BG: PAL B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Singapore)
I: PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK: PAL D/K (East Europe / China / Africa / CIS)
B/B: Australia
•To store another channel, repeat steps 4 to 9.
39
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
SETUP
OK
Auto Tuning
ꔋ
Manual
ManualTuning
Tuning ➩
Programme Edit
Software Update Move
OK
Auto Tuning
: ON
Diagnostics
Manual
ManualTuning
Tuning ◄
ꔋ
Programme Edit
Storage
Software Update System: ON
Band
Diagnostics
►
TV
3
B/B
V/UHF
Channel
0
Search
◄►
Name
C 02
Store
Close
WATCHING TV / PROGRAMME CONTROL
■■ Assigning a station name
You can assign a station name with five characters to each programme number.
1
2
MENU
Select SETUP.
Select Manual Tuning.
3
Select TV.
4
5
6
Select Name.
Select the position and make your choice of the second character, and so on.
You can use an the alphabet A to Z, the number 0 to 9, +/ -, and blank.
Select Close.
7
Select Store.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
40
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P ꕭꕮ button during TV viewing.
If you wish to select the skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
You can change the programme number using “Move” function, if “Automatic Numbering” is
unchecked when you start Auto Tuning.
Move
1
OK
YLE TV1
Auto Tuning
Manual Tuning
ꔋ
Programme
ProgrammeEdit
Edit Software Update : ON
➩
Diagnostics
Pr. Change
Navigation
DTV
RADIO
TV
1 ABC TV Sydney
77 Guide
9 Nine Digital
10 ABC2
11 ABC TV
12 ABC HDTV
13 ABC TV 1
14 ABC TV 2
70 7 HD Digital
71 7 Digital 1
72 7 Digital 2
73 7 Digital 3
77 7 Guide
90 Nine Digital HD
99 Nine Guide
100 ABC TV 3
Page Change
Previous
Skip
1
2
MENU
• Use NUMBER buttons to input a
4-digit password in Lock System "On".
Select SETUP.
WATCHING TV / PROGRAMME CONTROL
SETUP
Select Programme Edit.
3
Enter the Programme Edit.
4
Select a programme to be stored or skipped.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
41
WATCHING TV / PROGRAMME CONTROL
IN DTV/RADIO MODE
■■ Skipping a programme number
1
2
WATCHING TV / PROGRAMME CONTROL
42
3
Select a programme number to be skipped.
BLUE Turn the programme number to blue.
BLUE Release.
• When programmes are to be skipped, the
skipped programme shows in blue and
these programmes will not be selected by
the P ꕭꕮ buttons during TV viewing.
• If you wish to select a skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the programme edit
or EPG.
■■ Selecting favourite programme
1
Select your favourite programme
number.
• It will automatically include the selected
programme into your favourite programme list..
IN TV MODE
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
■■ Deleting a programme
1
2
RED
Turn the programme number to red.
RED
Delete.
WATCHING TV / PROGRAMME CONTROL
3
Select a programme number to be skipped.
• The selected programme is deleted, all
the following programmes are shifted
up one.
BLUE Release.
■■ Moving a programme
1
2
Select a programme number to be skipped.
Turn the programme number to green.
GREEN
3
GREEN
Release.
■■ Skipping a programme number
1
2
3
Select a programme number to be skipped.
BLUE Turn the programme number to blue.
BLUE Release.
• When a programme number is skipped
it means that you will be unable to
select it using the P ꕭꕮ button during
normal TV viewing.
• If you wish to select a skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the programme
edit or EPG.
43
WATCHING TV / PROGRAMME CONTROL
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
SETUP
Move
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Software
SoftwareUpdate
Update
WATCHING TV / PROGRAMME CONTROL
44
: On : ON
ꔋ
Diagnostics
1
MENU
➩
Move
OK
Programme Edit
Software
SoftwareUpdate
Update
Diagnostics
:Off
On : ON
ꔋ
On
On
ꔋ
Select SETUP.
2
Select Software Update.
3
4
SETUP
OK
Auto Tuning
Select On or Off.
• If you select On, a user confirm message box will be displayed to notify that
new software is found.
Save.
* When setting “Software Update”
Occasionally, a transmission of
updated digital software information will result in a following menu on the Moniter
set screen.
Yes
Close
Simple Update: for current
update stream
A new software update is available at 00/00/0 00:00.
Do you want to update the software when available?
Yes
After the Software Update is
complete, the System
restarts.
Software downloading progress.
Ver. 03.01.00 s Ver. 03.02.00
65 %
Hide
New Software is successfully installed.
Stop
When the power is turned off, downloading starts.
When the power is turned on while updating, the
progress status is displayed.
Close
Schedule Update: for scheduled update stream.
When the Software Update menu is "Off", the message to change it to "On" appears.
--During Progress of a Software Update, please note the following:
• Power to the Moniter set must not be interrupted.
• The Moniter set must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Diagnostics menu.
• It may take hours to download the software, so make sure that the power stays on during the download.
WATCHING TV / PROGRAMME CONTROL
Software update is available.
Would you like to download now?
(approximately 30 Min ~ 2 hours)
Your TV software is updated when you turn off the TV
using the remote control or local key.
Do not unplug!
Select the Yes using the < > button and you will see the following picture.
45
WATCHING TV / PROGRAMME CONTROL
DIAGNOSTICS
This function enables you to view information on the Manufacturer, Model/Type and Software Version.
This displays the information and signal strength of the tuned *MUX.
This displays the signal information and service name of the selected *MUX.
(*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.))
Engineering Diagnostics
SETUP
Move
WATCHING TV / PROGRAMME CONTROL
Manufacturer : LG Electronics Inc.
Model / Type : M2380D
Software Version : V01.09.00
OK
Auto Tuning
Manual Tuning
Programme Edit
Software Update Diagnostics
Diagnostics
: ON
ꔋ
➩
ꔋ
CH 30
CH 34
CH 36
Prev.
1
2
MENU
Popup
Exit
Select SETUP.
Select Diagnostics.
3
Display Manufacturer, Model / Type and Software Version.
4
Display the information of Channel.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
46
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
PROGRAMME LIST
Mini Glossary
Displayed when the
Locked Programme.
DTV
1 ABC TV
DTV
2 ABC 2
DTV
3 ABC TV 2
ꔋ
■■ Displaying programme LIST
1
LIST
Display the Programme List.
• You may find some blue programmes.
These have been set up to be skipped by
auto programming or in the programme
edit mode.
• Some programmes with the channel number shown in the programme LIST
indicate there is no station name assigned.
■■ Selecting a programme in the programme list
1
Select a programme.
TV/
RAD
2
Switch to the chosen programme number.
1
WATCHING TV / PROGRAMME CONTROL
Exit.
The mode will be switched
between TV, DTV, and Radio from
the program you are currently
watching.
Turn the pages.
2
LIST
Return to normal TV viewing.
47
WATCHING TV / PROGRAMME CONTROL
FAVOURITE PROGRAMME SETUP
■■ Selecting favourite programme
You can check which programmes are stored in the memory by displaying the programme list.
Favourite
◄
►
WATCHING TV / PROGRAMME CONTROL
Off
1
2
3
Select your desired
programme.
or
Select Favourite.
4
Select Favourite.
Return to TV viewing.
• This will automatically include the selected programme into your favourite programme list.
■■ Displaying the favourite programme list
♥ FAVOURITE LIST
DTV
1 ABC TV
DTV
2 ABC
DTV
3 ABC TV 2
ꔋ
Exit.
48
3
MARK
FAV
Display the Favourite Programme List.
INPUT LIST
HDMI, AV, Component and RGB can be recognized by a detect pin and thus enabled only when an
external device approves voltage.
By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode.
• Antenna: Select it when watching the DTV/TV.
• AV: Select it when watching the VCR or external equipment.
• Component: Select it when using the DVD or the Digital set-top box depends on connector.
• RGB : Select it when using PC depends on connector.
• HDMI 1, HDMI 2: Select it when using DVD, PC or Digital set-top box depend on connector.
AV
Component
HDMI 2
HDMI 1
RGB
INPUT
Select the input source.
WATCHING TV / PROGRAMME CONTROL
1
Antenna
! NOTE
►►The OSD (On Screen Display) is displayed on the screen as shown below.
Is the input connected to your PC?
Yes
No
• When turning the product on in HDMI input.
• When switching to HDMI input.
• When connecting an HDMI cable with no signal.
Do not show message again.
• If you select "Yes" the size and image quality are optimised for your PC.
• If you select "No" the size and image quality are optimised for the AV device (DVD player, Set-top
box, gaming device).
• If you select "Do not show message again," this message does not appear until the monitor is reset.
You can change the set value in MENU s OPTION sInput Label.
• The values set for HDMI1/HDMI2 are saved independently.
49
EPG (ELECTRONIC PROGRAMME GUIDE)(IN
DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the
availability and amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies.
The EPG displays the programme details for next 7 days.
Shows the present screen information.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
ꔛ Displayed with a DTV Programme.
ꔚ Displayed with a Radio Programme.
꘎ Displayed with a MHEG Programme.
ꔽ Displayed with a AAC Programme.
ꕄ Aspect ratio of broadcasting programme.
ꕅ Aspect ratio of broadcasting programme.
Switch on EPG
1
GUIDE
Select a programme
1
2
50
Switch on or off EPG.
or
Select desired programme.
Display the selected programme.
ꔉ Displayed with a Teletext Programme.
Displayed with a Subtitle Programme.
ꔟ Displayed with a Scramble Programme.
ꔵ Displayed with a Dolby Programme.
ꔶ Displayed with a Dolby Digital PLUS
Programme.
576i/p, 720p, 1080i/p: Resolution of broadcasting programme
Button Function in NOW/NEXT Guide Mode
You can view a program being broadcasted and one scheduled to follow.
RED Change EPG mode.
Programme Guide
1 YLE TV1
NOW
1 YLE TV1
YELLOW Enter Timer Remind setting mode.
5 YLE FST Naturtimmen
6 CNN
Lyssna
8 YLE24 Glamour
Favourite
Select the Broadcast Programme.
ꔎ
Information
Tänään otsikoissa
Schedule
or
or
BACK
RADIO
Pr. Change
Mode
GUIDE
Keno
World Business
Fantomen
Kritiskt
ABC
Schedule List
Switch off EPG.
EXIT
Select TV or RADIO Programme.
TV/
RAD
Page Up/Down.
Detail information on or off
Button Function in 7 Day Guide Mode
RED Change EPG mode.
Programme Guide
1 YLE TV1
GREEN Enter Date setting mode.
14:00
2 YLE TV2
5 YLE FST
6 CNN
...
8 YLE24
15:00
Antigues Roadshow
Mint Extra
TV2: Farmen
Kungskonsumente
The Drum
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
1 YLE TV1
4 TV..
YELLOW Enter Timer Remind setting mode.
ꔎ
Favourite
BLUE Enter Timer Remind list mode.
Change to the selected programme.
Select NOW or NEXT Programme.
Select the Broadcast Programme.
Information
Mode
GUIDE
TV/
RAD
6 Apr. 2007 15:09
ꔎ
6 Apr. (Fri.)
ALL
Pr. Change
Date
or
BACK
Schedule
or
EXIT
RADIO
Schedule List
Switch off EPG.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Select NOW or NEXT Programme.
NEXT
That ’70s show
2 YLE TV2 Your World Today
4 TV..
Legenen om Den....
BLUE Enter Timer Remind list mode.
Change to the selected programme.
6 Apr. 2007 15:09
ꔎ
ALL
Select TV or RADIO Programme.
Detail information on or off
Page Up/Down.
51
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
Button Function in Date Change Mode
GREEN Switch off Date setting mode.
Programme Guide
1 YLE TV1
ALL
Change to the selected date.
1 YLE TV1
2 YLE TV2
5 YLE FST
6 CNN
8 YLE24
...
►
6 Apr. (Fri.)
14:00
4 TV..
Select a date.
6 Apr. 2007 15:09
ꔎ
◄
15:00
Kungskonsumente
Antigues Roadshow
The Drum
Mint Extra
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
ꔎ
Date. Change
Date Exit
Switch off Date setting mode.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
52
GUIDE
or
BACK
or
EXIT
Switch off EPG.
Button Function in Extended Description Box
Text Up/Down.
Information
YELLOW Enter Timer Remind setting mode.
▲
The detail information on or off.
▲
Information
Schedule
EXIT
or
GUIDE
Switch off EPG.
Button Function in Remind Setting Mode
Select the date to remind.
Change to Guide or Schedule mode.
Date
Start Time
Programme
6 Mar.
15:09
That ’70s sh
v
BACK
v
Function setting.
OK
Prev.
Select Date, Start time or Programme.
Save Timer Remind.
If you’ve created a schedule list, a scheduled program is displayed at the scheduled time even when you
are watching a different program at the time.
Only the Up/Down/OK/BACK keys will work when a popup window is open.
Schedule List
Start Date
GREEN Add new Timer Watching setting mode.
BLUE
BACK
or
or
GUIDE
EXIT
Change to Guide mode.
Switch off EPG.
Fri. 6 Apr. 2007 15:09
Page1/1
Start Time
Title
6 May 16:00 Friend1
6 May 18:00 Friend2
Friend2
16:00
Modify
Delete
Delete All
Remind
DTV 19 Dave
(Fri.)06/05/2007
16:00
Close
Move
Modify/Delete
New Record
New Remind
Select your desired Option(Modify/Delete/Delete All).
Page Change
Exit
Programme Guide
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in Schedule List Mode
Select Schedule List.
Page Up/Down.
53
MHEG (MULTIMEDIA AND HYPERMEDIA
INFORMATION CODING EXPERT GROUP)
(IN DIGITAL MODE) (Only New Zealand)
This feature is enabled only in New Zealand.
- In New Zealand, pressing the Guide key will display MHEG EPG provided by New Zealand on the
screen.
This system has an MHEG(Multimedia and hypermedia information coding expert group) to help your
navigation through all the possible viewing options.
Shows the present screen information.
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION
CODING EXPERT GROUP)(IN DIGITAL MODE)
ꔛ Displayed with a DTV Programme.
ꔚ Displayed with a Radio Programme.
꘎ Displayed with a MHEG Programme.
ꔽ Displayed with a AAC Programme.
ꕄ Aspect ratio of broadcasting programme.
ꕅ Aspect ratio of broadcasting programme.
576i/p, 720p, 1080i/p: Resolution of broadcasting programme
Switch on MHEG
1
GUIDE
Switch on the MHEG.
Select a programme
1
2
3
54
ꔉ Displayed with a Teletext Programme.
Displayed with a Subtitle Programme.
ꔟ Displayed with a Scramble Programme.
ꔵ Displayed with a Dolby Programme.
ꔶ Displayed with a Dolby Digital PLUS
Programme.
Preview the Broadcast Programme Information.
change to desired channel.
The MHEG will disappear after moving to a selected channel.
Button Function in Listing Mode
Select the Broadcast Programme
Information.
Tue 12 Feb
2.30pm Ellen
Select Channel.
Emmy Award-winning comedian and
writer, best-selling author, actor and
television pinmeer Ellen DeGeneres
brings her unipue brand of hilarity to
daytime talk.
YELLOW Change to Next Week or Prev Day.
BLUE Change to Next Day or Today.
GUIDE
BACK
Change to Now/Next mode.
or
EXIT
Switch off MHEG.
Detail information on or off.
Next Week
Chnl
EPG/Guide
Next Day
Now/Next
Tue 12 Feb
2.30pm Ellen
3.30pm Whanau
3.40pm Te Karere
4.00pm Emmerdale
4.30pm ONE News At 4.30
4.55pm Mucking In
5.20pm Masterchef Goes
Large
6.00pm ONE News At 6pm
7.00pm Close Up
Prog
Chnl
OK Watch TV
Emmy Award-winning comedian and
writer, best-selling author, actor and
television pinmeer Ellen DeGeneres
brings her unipue brand of hilarity to
daytime talk.
Next Week
EPG/Guide
Next Day
Now/Next
Button Function in NOW/NEXT Mode
You can view a channel being broadcasted and one scheduled to follow.
Select desired channel.
The MHEG will disappear after moving
to a selected channel.
GUIDE
BACK
Change to Listing mode.
or
EXIT
Switch off MHEG.
2.33pm Tue 12 Feb
What’s on now/next.
1
TV ONE
Now 2.30pm
Now 3.30pm
Neighbours
Jojo’s Circus
2
TV2
Now 2.30pm
Next 3.00pm
Neighbours
Jojo’s Circus
3
TV3
Now 2.00pm
Next 3.00pm
Oprah
Rugrats
4
C4
Now 2.00pm
Next 4.00pm
The Officaial NZ Top 40
Vodafone Select Live
5
Māori Television
Now 12.00am
Next 3.00pm
News : Te Kaea
Advice: Ask Your Auntie
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION
CODING EXPERT GROUP)(IN DIGITAL MODE)
The MHEG will disappear after moving
to a selected channel.
Prog
OK Watch TV
Chnl
OK Watch TV
EPG
Listings
Detail information on or off.
55
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats: 16:9, Just Scan, Original, 4:3, 14:9, Zoom and
Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on
the screen and remain visible.
You can adjust the enlarge proportion using ꕭꕮ button.
This function works in the following signal.
1
PICTURE CONTROL
2
Select Aspect Ratio.
Select the desired picture format.
• 16:9
The following selection will allow you to
adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs).
• You can also adjust Aspect Ratio in the
PICTURE menu.
• For Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After completing
Zoom Setting, the display goes back to Q.Menu.
• Original
When your Monitor set receives a wide
screen signal it will automatically change to
the picture format broadcast.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original picture in high resolution image.
Note : If there is noise in original Picture,
You can see the noise at the edge.
Just Scan
56
• 4:3
The following selection will allow you to view
a picture with an original 4:3 aspect ratio,
gray bars will appear on both the left and
right of the screen.
• 14 : 9
You can view a picture format of 14:9 or a
gen eral TV programme in the 14:9 mode.
The 14:9 screen is viewed in the same way
as in 4:3, but is magnified to the left and
right.
◄ or ► button: Adjust enlarge proportion of
Cinema Zoom. The adjustment range is 1 to 16.
v or u button: Move the screen.
PICTURE CONTROL
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling the entire screen. However, the top
and bottom of the picture will be cropped.
• Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note:When enlarging or reducing the picture, the image may become distorted.
! NOTE
►You
►
can only select 4:3, 16:9 (Wide), 14:9, Zoom / Cinema Zoom in Component mode.
►You
►
can only select 4:3, Original, 16:9 (Wide), 14:9, Zoom / Cinema Zoom in HDMI mode.
►You
►
can only select 4:3, 16:9 (Wide) in RGB-PC, HDMI-PC mode only.
►In
► DTV/HDMI/Component (over 720p) mode, Just Scan is available.
57
PICTURE CONTROL
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can
calibrate the screen quality by easily following each stage.
When you adjust the image to Low, Recommended or High, you can see the changed result as an
example.
In RGB-PC / HDMI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
PICTURE
Move
Aspect Ratio Picture Wizard
OK
With Picture Wizard, you can adjust the picture quality of the
: 16:9
original image.
ꔋ
Picture
PictureWizard
Wizard
PICTURE CONTROL
ꕫ Energy Saving : Off
Picture Mode : Vivid
• Backlight 100
• Contrast • Brightness 50
• Sharpness ➩
100
70
v
1
2
3
4
MENU
Previous
Select PICTURE.
Next
• If you stop the setting before the final stage,
the changes will not be applied
• The adjustment value is saved to Expert 1.
Select Picture Wizard.
Adjust Black level, White level, Colour, Tint, Horizontal Sharpness, Vertical Sharpness, Colour Temperature, Dynamic Contrast , Colour Gain,
Backlight.
Select input source to apply the settings.
5
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
58
ꕫ ENERGY SAVING
It reduces the Monitor set power consumption.
The default factory setting is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the
Picture Mode.
When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished.
Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
PICTURE
Move
Aspect Ratio PICTURE
OK
: 16:9
Aspect Ratio Picture Wizard
Off
:: Off
ꔋ
ꕫ
ꕫ Energy
Energy Saving
Saving Off
:: Off
Picture Mode : Vivid
• Backlight 100
Picture Mode : Vivid
• Contrast • Backlight 100
100
• Contrast • Brightness 50
• Brightness 50
• Sharpness • Sharpness 70
➩
Off
Off
ꔋ
Minimum
Medium
Maximum
Screen Off
ꔋ
100
70
v
Select PICTURE.
PICTURE CONTROL
2
MENU
OK
Picture Wizard
ꕫ
ꕫ Energy
Energy Saving
Saving v
1
Move
: 16:9
Select ꕫ Energy Saving.
3
Select Off, Minimum, Medium, Maximum or Screen Off.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
• When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start.
And the Monitor set is disabled to be automatically turned off.
• You can also adjust this feature by selecting Energy Saving button on the remote control.
• If you want to return from Screen off, input any key.
59
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
Vivid Standard Cinema Sport Game Strengthen the contrast, brightness, colour and sharpness for vivid picture.
The most general screen display status.
Optimizes video for watching movies.
Optimizes video for watching sports events.
Optimizes video for playing games.
PICTURE
Move
Aspect Ratio PICTURE
OK
: 16:9
Aspect Ratio Picture Wizard
PICTURE CONTROL
2
MENU
OK
Picture Wizard
ꕫ Energy Saving : Off
Picture
Picture Mode
Mode :: Vivid
Vivid
Vivid
Vivid
ꕫ Energy Saving : Off
Picture
Picture Mode
Mode :: Vivid
Vivid
• Backlight 100
• Backlight 100
Sport
• Contrast 100
• Contrast Game
• Brightness 50
• Brightness 50
• Sharpness • Sharpness ꔋ
70
➩
v
1
Move
: 16:9
ꔋ
Standard
ꔋ
Cinema
100
70
ꕬ Expert 1
ꕬ Expert 2
v
Select PICTURE.
Select Picture Mode.
3
Select Vivid, Standard, Cinema, Sport or Game
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
• Picture Mode adjusts the Monitor set for the best picture appearance. Select the preset value in the
Picture Mode menu based on the programme category.
• You can also adjust Picture Mode in the Q. Menu.
60
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
Contrast
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part
of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Colour Temperature
Set to warm to enhance hotter colours such as red, or set to cool to make picture bluish.
Aspect Ratio Move
PICTURE
OK
: 16:9
Aspect Ratio Picture Wizard
OK
Picture Wizard
ꕫ Energy Saving : Off
Picture
Picture Mode
Mode :: Vivid
Vivid
• Backlight 100
• Contrast Vivid
Vivid
ꕫ Energy Saving : Off
Picture
Picture Mode
Mode :: Vivid
Vivid
• Backlight 100
Sport
100
• Contrast Game
• Brightness 50
• Brightness 50
• Sharpness • Sharpness ꔋ
➩
70
v
1
Move
: 16:9
MENU
2
ꔋ
Standard
ꔋ
Cinema
100
70
ꕬ Expert 1
ꕬ Expert 2
v
PICTURE CONTROL
PICTURE
Select PICTURE.
Select Picture Mode.
3
Select Vivid, Standard, Cinema, Sport or Game
4
Select Backlight, Contrast, Brightness, Sharpness, Colour,Tint or Colour Temperature.
5
Make appropriate adjustments.
6
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
! NOTE
►You
►
cannot adjust colour and tint in the RGB-PC / HDMI-PC mode.
►When
►
the Expert 1/2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V Sharpness, Colour or Tint .
61
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video
screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the “Picture
Reset” function for each Picture Mode.
PICTURE
Move
PICTURE
OK
u
Move
OK
u
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
• Colour 50
• Colour 50
PICTURE CONTROL
• Tint •ColourTemperatureW24
•• Advanced
Advanced Control
Control
➩
0
ꔋ
• Picture Reset
Off
Noise Reduction
• Tint •ColourTemperatureW24 Gamma
Screen
Off
Dynamic Colour
Screen
0
Dynamic Contrast
Off
◄
•• Advanced
ꔋ
Advanced Control
Control Black Level
• Picture Reset
Film Mode
High ►
Off
Off
Close
1
2
3
MENU
Select PICTURE.
Select Advanced Control.
Select Dynamic Contrast, Dynamic Colour, Noise Reduction, Gamma, Black Level or
Film Mode. (Refer to p. 64 to 65)
4
Select your desired Source.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
62
EXPERT PICTURE CONTROL
By segmenting categories, Expert 1 and Expert 2 provide more categories which users can set as they
see fit, offering the optimal picture quality for users.
This may also be used to help a professional optimize the Monitor set performance using specific videos.
PICTURE
Aspect Ratio Move
PICTURE
OK
: 16:9
Picture Wizard
ꕫ Energy Saving Picture
Picture Mode
Mode Vivid
:: ꕬ
Expert 1 Standard
Standard
ꔋ
• Backlight Cinema
70
Sport
90
• Contrast • Brightness Game
50
ꕬ Expert
1
• H Sharpness ꕬ
70 Expert 1
v
ꔋ
ꕬ Expert 2
OK
Nosie Reduction
Off
Off
• Contrast • Brightness 50
Gamma
• H Sharpness 50
Black Level
High
• V Sharpness 49
Film Mode
Off
• Colour • Tint 0
•• Expert
Control
Advanced
Control
• Picture Reset
v
90
Dynamic Contrast
50
◄ Medium ►
Colour Standard
HD
Expert
ꔋ Pattern
Off
Colour Filter
Off
Colour Temperature
Warm
Close
1
2
MENU
Select PICTURE.
PICTURE CONTROL
➩
: Off
Move
u
Select Picture Mode.
3
Select ꕬ Expert 1 or ꕬ Expert 2.
4
Select Expert Control.
5
Select your desired Source.
6
Make appropriate adjustments.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
63
PICTURE CONTROL
Dynamic Contrast
(Off/Low/High)
■■ Adjusts the contrast to keep it at the best level according to the
brightness of the screen. The picture is improved by making bright parts
brighter and dark parts darker.
Dynamic Colour
(Off/Low/High )
■■ Adjusts screen colours so that they look livelier, richer and clearer. This
feature enhances hue, saturation and luminance so that red, blue, green
and white look more vivid.
Noise Reduction
(Off/Low/Medium/High)
PICTURE CONTROL
Gamma
(Low/Medium/High)
■■ You can adjust brightness of dark area and middle gray level area
of the picture.
• Low: Make dark and middle gray level area of the picture brighter.
• Medium: Express original picture levels.
• High: Make dark and middle gray level area of the picture darker.
Black Level
(Low/High/Auto)
• Low: The picture of the screen gets darker.
• High: The picture of the screen gets brighter.
• Auto: Realizing the black level of the screen and set it to High or
Low automatically.
■■ Set black level of the screen to proper level.
■■ This function enables to select 'Low' or 'High' in the following
mode: AV(NTSC-M), HDMI or Component. Otherwise, 'Black level'
is set to 'Auto'.
Film Mode
(On/Off)
64
■■ Reduces screen noise without compromising video quality.
■■ You can watch a cinema-like video by eliminating judder effect.
■■ Use this function when you watch movies.
Colour Standard
(SD/HD)
■■ Converts the colour of a different video to HD colour. This function
is set for SD video (BT-601) and HD video (BT-709) colour format.
Expert Pattern
(Off/Expert 1/Expert 2)
■■ This is the pattern necessary for expert adjustment.
■■ This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter
(Off/Red/Green/Blue)
■■ This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue
accurately.
■■ This is the function to adjust the overall colour of the screen to the
feeling you want.
a. • Method: 2 Points
• Pattern: Inner, Outer
• Red/Green/Blue Contrast, Red/Green/Blue Brightness :
Colour Temperature
(Medium/Warm/Cool)
The adjustment range is -50 to +50.
b. • Method: 10 point IRE
• Pattern: Inner / Outer
• Red/Green/Blue: The adjustment range is -50 to +50.
Colour Management
System
■■ As the tool used by the experts to make adjustments by using the
test patterns, this does not affect other colours but can be used to
selectively adjust the 6 colour areas (Red/Green/Blue/Cyan/
Magenta/Yellow).
Colour difference may not be distinctive even when you make the
adjustments for the general video.
PICTURE CONTROL
• IRE (Institute of Radio Engineers) is the unit to display the size
of the video signal and can be set among 10, 20, 30 to 100. You
can adjust Red, Green or Blue according to each setting.
■■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan/Magenta Colour: The adjustment
range is -30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment
range is -30 to +30.
■■ This feature is disable in RGB-PC and HDMI (PC) mode.
65
PICTURE CONTROL
PICTURE RESET
Settings of the selected picture modes BACK to the default factory settings.
PICTURE
Move
PICTURE
OK
u
PICTURE CONTROL
2
MENU
OK
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness • Colour 60
• Tint •ColourTemperatureW24
• Colour 60
All picture setting will be resetted.
• Tint 0
Continue?
•ColourTemperatureW24
• Advanced Control
•• Picture
Picture Reset
Reset
➩
0
ꔋ
Screen
1
Move
u
70
?
• Advanced Control
•• Picture
Picture Reset
ResetYes
ꔋ
No
Screen
Select PICTURE.
Select Picture Reset.
3
Select Yes or No.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
66
SCREEN SETUP FOR PC MODE
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC] mode.
<Vertical resolution : 768>
SCREEN
Resoluttion
PICTURE
Move
Move
s
Prev.
1024 x 768
Auto Config.
1280 x 768
Position
1360 x 768
OK
Size
u
• Brightness 50
• Sharpness 70
• Colour 60
• Tint •ColourTemperatureW24
• Advanced Control
Screen
Screen
• Picture Reset
Phase
➩
0
Reset
<Vertical resolution : 900>
SCREEN
ꔋ
Resoluttion
Move
s
Prev.
1280 x 960
Auto Config.
1400 x 900
Position
1600 x 900
Size
Phase
PICTURE CONTROL
Reset
1
2
MENU
Select PICTURE.
Select Screen.
3
Select Resolution.
4
Select the desired resolution.
5
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
67
PICTURE CONTROL
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image
is still not correct, your set is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed
image will be unstable for a few seconds while the auto configuration is in progress.
1. Using OSD
PICTURE
Move
PICTURE CONTROL
1
MENU
2
SCREEN
OK
u
Move
Prev.
Resolution
• Brightness 50
• Sharpness 70
• Colour 60
• Tint •ColourTemperatureW24
• Advanced Control
Screen
Screen
• Picture Reset
Auto Config.
➩
0
s
Position
To Set
Size
Yes
No
Phase
ꔋ
Select PICTURE.
Reset
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Posi tion, Size or Phase.
Select Screen.
3
Select Auto Config.
4
5
Select Yes.
Run Auto Config.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
2. Using Auto Config. (Remocon)
This function is available for RGB signals only.
1
Auto Config.
Press Auto Config.
Auto in progress
<1920 x 1080 Resolution>
Auto in progress
For optimal display
change resolution 1920 x 1080
<Others Resolution>
68
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust
the picture phase manually.
This function works in the following mode: RGB[PC].
PICTURE
Move
• Brightness 50
• Sharpness 70
• Colour 60
• Tint •ColourTemperatureW24
• Advanced Control
1
2
MENU
Move
Prev.
Resolution
➩
0
Auto Config.
Position
s
Size
Phase
• Picture Reset
ꔋ
Reset
Select PICTURE.
PICTURE CONTROL
Screen
Screen
SCREEN
OK
u
Select Screen.
3
Select Position, Size or Phase.
4
Make appropriate adjustments.
5
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
69
PICTURE CONTROL
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode: RGB[PC].
PICTURE
Move
• Brightness 50
• Sharpness 70
• Colour 60
• Tint •ColourTemperatureW24
• Advanced Control
PICTURE CONTROL
Screen
Screen
1
2
MENU
SCREEN
OK
u
Move
Prev.
Resolution
➩
0
Auto Config.
Position
To Set
Size
Yes
No
Phase
• Picture Reset
ꔋ
Reset
s
Select PICTURE.
Select Screen.
3
Select Reset.
4
Select Yes.
5
Run Reset.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
70
SOUND CONTROL
AUTO VOLUME LEVELER
AVL automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each program.
If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with different user environments.
AUDIO
Move
Auto
Auto Volume
Volume : Off
Clear Voice II : Off ꕤ3
AUDIO
OK
ꔋ
Balance 0
: Music
• Surround X • Treble 50
• Bass 50
• Reset
➩
: Off
ꔏ
1
2
MENU
: Off
Clear Voice II : Off ꕤ3
OK
Balance Off
Off
ꔋ
ꔋ
On
0
Sound Mode : Music
• Surround X • Treble 50
• Bass 50
• Reset
: Off
ꔏ
Select AUDIO.
SOUND CONTROL
Sound Mode Move
Auto
Auto Volume
Volume Select Auto Volume.
3
Select On or Off.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
71
SOUND CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
Auto Volume : Off
Clear Voice
Voice IIII Clear
: Off ꕤ3
AUDIO
OK
ꔋ
Balance 0
Sound Mode : Music
• Surround X • Treble • Bass • Reset
SOUND CONTROL
2
MENU
: Off
Clear Voice
Voice IIII Clear
: Off ꕤ3
OK
Balance ➩
• Clear Voice II
ꔋ
• Level
3
0
Sound Mode : Standard
• Surround X 50
• Treble 50
50
• Bass 50
• Reset
: Off
ꔏ
1
Move
Auto Volume ◄
Off
Close
: Off
ꔏ
Select AUDIO.
Select Auto Volume.
• If you select “On” for Clear Voice II, Surround X feature will not work.
• Select levels from ‘-6’ to ’+6’.
3
Select On or Off.
Adjustment for Clear Voice Level With selecting On
4
Select Level.
5
Make desired adjustment.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
72
►
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
Auto Volume : Off
Clear Voice II : Off ꕤ3
Balance
Balance AUDIO
OK
0
ꔋ
0
Sound Mode : Music
• Surround X • Treble 50
• Bass 50
• Reset
: Off
ꔏ
2
MENU
: Off
Clear Voice II : Off ꕤ3
Balance
Balance OK
Sound Mode 0
Balance
: Standard
• Surround X • Treble 50
• Bass 50
• Reset
0
0 ◄
ꔋ
►
: Off
Close
ꔏ
SOUND CONTROL
1
➩
Move
Auto Volume Select AUDIO.
Select Balance.
3
Make desired adjustment.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
73
SOUND CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can
also adjust the Treble, Bass.
Sound Mode lets you enjoy the best sound without any Special adjustment as the Monitor set the
appropriate sound options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard Music Cinema Sport Game Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Move
Auto Volume : Off
Clear Voice II : Off ꕤ3
SOUND CONTROL
Balance AUDIO
OK
0
Sound
Sound Mode
Mode Music : Standard
• Surround X • Treble • Bass • Reset
ꔋ
: Off
50
➩
: Off
Clear Voice II : Off ꕤ3
Balance 2
MENU
0
ꔋ
Music
: Standard
Standard
• Surround X
: Off
Music
• Treble Music
50
• Bass • Reset
ꔏ
1
OK
Sound
Sound Mode
Mode 50
Move
Auto Volume ꔏ
ꔋ
Cinema
50
Sport
Game
• You can also adjust Sound Mode in the Q. Menu.
Select AUDIO.
Select Sound Mode.
3
Select Standard, Music, Cinema, Sport or Game.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
74
PRESET SOUND SETTINGS-USER MODE
AUDIO
Move
Auto Volume : Off
Clear Voice II : Off ꕤ3
Balance AUDIO
OK
0
Sound
Sound Mode
Mode Music (User)
: Standard
• Surround X • Treble • Bass • Reset
ꔋ
Move
: Off
Clear Voice II : Off ꕤ3
Balance ➩
: Off
50
Music (User)
: Standard
Standard
• Surround X
: Off
Music
• Treble Music
50
50
MENU
2
0
Sound
Sound Mode
Mode • Bass • Reset
ꔏ
1
OK
Auto Volume ꔋ
ꔋ
Cinema
50
Sport
Game
ꔏ
Select AUDIO.
Select Sound Mode.
3
SOUND CONTROL
Select Standard, Music, Cinema, Sport or Game.
4
Select Treble or Bass.
5
Set the desired sound level.
Surround X
Select this option to sound realistic.
Enhance sound depth and clarity by maximizing Surround effect.
1
2
MENU
Select AUDIO.
AUDIO
Select Surround X.
Clear Voice II : Off ꕤ3
Balance Select On or off
4
: Off
Sound Mode 3
Move
Auto Volume OK
0
: Standard
Off
: :•Off
Surround ꔋ
X
• Surround X • Treble 50
• Bass 50
• Reset
ꔏ
◄
• Treble
50
• Bass
50
Off
►
Close
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
75
SOUND CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
AUDIO
OK
Move
SOUND CONTROL
1
2
MENU
OK
ꔎ
ꔎ
Sound Mode : Music
• Surround X :
• Treble 50
50
Off
➩
Sound Mode : Music
• Surround X :
• Treble • Bass 50
Resetting sound mode configuration...
• Reset
• Bass • Reset
Digital Audio Out : PCM
Digital Audio Out : PCM
TV Speaker : On
TV Speaker : On
DTV Audio Setting
: Auto
DTV Audio Setting
: Auto
ꔋ
Off
50
ꔋ
Select AUDIO.
Select Reset.
3
Initialize the adjusted value.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
76
DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
The Monitor set can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio.
When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF (Sony
Philips Digital InterFace) output to Dolby Digital.
If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will
be PCM (Pulse-code modulation).
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby
Digital Audio, only Dolby Digital will be played.
AUDIO
Move
AUDIO
OK
ꔎ
2
MENU
OK
ꔎ
Sound Mode : Music
• Surround X :
Sound Mode : Music
• Treble 50
• Surround X :
• Treble 50
• Bass 50
• Reset
• Bass 50
• Reset
Digital Audio Out : PCM
Digital Audio Out : PCM
TV Speaker : On
TV Speaker : On
DTV Audio Setting
: Auto
DTV Audio Setting
: Auto
Off
➩
ꔋ
Off
Auto
PCM
PCM
ꔋ
ꔋ
SOUND CONTROL
1
Move
Select AUDIO.
Select Digital Audio Out.
3
Select Auto or PCM.
4
Item
Audio Input
Digital Audio output
Auto (Speaker On)
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
PCM
Auto (Speaker Off)
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
Dolby Digital
PCM
PCM
PCM
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
77
SOUND CONTROL
TV SPEAKERS ON / OFF SETUP
You can adjust the TV internal speaker status.
In AV, COMPONENT, RGB and HDMI 1/2 with HDMI to DVI cable, the TV speaker can be operational
even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
AUDIO
Move
AUDIO
OK
ꔎ
SOUND CONTROL
1
: Music
• Surround X :
• Treble 50
• Bass 50
• Reset
Digital Audio Out : PCM
:: On
On
DTV Audio Setting
: Auto
MENU
2
OK
ꔎ
Sound Mode TV Speaker
Speaker TV
Move
Off
➩
Sound Mode : Music
• Surround X :
• Treble 50
• Bass 50
• Reset
Digital Audio Out ꔋ
TVSpeaker
Speaker TV
DTV Audio Setting
Off
: PCM
On
:: On
: Auto
Off
On
On
ꔋ
ꔋ
Select AUDIO.
Select TV Speaker.
3
Select On or Off.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
! NOTE
►When
►
the TV speaker is turned off while the Simplink home theater is operating, the sound output
automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound
output the TV speaker.
►Some
►
menus in AUDIO are disabled when TV Speaker is set to Off.
78
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)
When different audio types exist in an input signal, this function allows you to select the audio type
you want.
AUDIO
Move
AUDIO
OK
ꔎ
Move
Sound Mode : Music
• Surround X :
• Treble 50
• Bass 50
• Reset
Digital Audio Out : PCM
Digital Audio Out : PCM
TV Speaker : On
TV Speaker : On
Setting : Auto
DTV Audio Setting
: Auto
OK
ꔎ
Off
➩
ꔋ
Sound Mode : Music
• Surround X :
• Treble 50
• Bass 50
• Reset
DTV Audio Setting
Setting: Auto
: Auto
Off
Auto
Auto
HE-AAC
ꔋ
ꔋ
Dolby Digital
MPEG
2
MENU
Select AUDIO.
Select DTV Audio Setting.
SOUND CONTROL
1
3
Select Auto, HE-AAC, Dolby Digital or MPEG.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
• Auto: Automatically outputs in the order HE - AAC s Dolby Digital s MPEG.
• HE - AAC, Dolby Digital, MPEG: Allows users to select the audio type they want.
If MPEG is selected, MPEG is always outputted.
If MPEG is not supported, HE - AAC and Dolby Digital are selected in that order.
• Refer to p. 96 (Audio Language Selection)
79
SOUND CONTROL
STEREO RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme
number and station name.
1
Select Audio.
2
Select the sound output.
SOUND CONTROL
Broadcast
On Screen Display
Mono
Stereo
NICAM (Only South Africa & New Zealand)
MONO
STEREO
NICAM (Only South Africa & New Zealand)
■■Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R
input is sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers..
80
TIME SETTING
CLOCK SETUP
The clock is set automatically when receiving a digital signal. (You can set the clock manually only if
the TV has no DTV signal.)
You must set the time correctly before using on/off timer function.
When you select a Time Zone city, the TV time is set by the time offset information based on Time
Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set
automatically by a digital signal.
Once Clock is set in DTV mode, you cannot change time, but if the city name in Time Zone is
changed into offset, you can change time by 1 hour.
TIME
Move
TIME
OK
ꔋ
Clock
Clock Move
Clock
Clock Off Time : Off
Off Time : Off
On Time : Off
On Time : Off
Sleep Timer : Off
Sleep Timer : Off
➩
Date
OK
ꔋ
01
Month
Mar
Year
2010
Hour
16
Minute
09
Time Zone
NSW/ACT
(Only Australia)
Close
1
2
MENU
Select TIME.
TIME SETTING
GMT+11.0
Select Clock.
3
Select either the year, month, date, time or Time Zone(Only Australia) option.
4
Set the year, month, date, time or Time Zone (Only Australia) option.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
81
TIME SETTING
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the Monitor set to standby at a preset time.
Two hours after the Monitor set is switched on by the on time function it will automatically switch back
to standby mode unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The Monitor set must be in standby mode for the On time to work.
TIME
Move
TIME
OK
Clock
Move
Clock
Off Time : Off
On
On Time
Time :: Off
Off
Sleep Timer : Off
ꔋ
➩
Off Time : Off
On
On Time
Time :: Off
Off
Sleep Timer : Off
OK
ꔐ 11 Feb. 2010 19:48
Repeat
ꔋ
◄
Off
Hour
00
Minute
00
Input
►
Antenna
Programme
TV1
Volume
30
Close
1
TIME SETTING
2
MENU
Select TIME.
• To cancel On/Off Time function, select Off.
• For On Time function only
Select Off Time or On Time.
1
Select Repeat.
2
3
4
Select Off, Once, Daily, Mon ~ Fri,
Mon ~ Sat, Sat ~ Sun or Sun.
3
Select Input.
Select the input source.
Set the programme.
5
4
Set the hour.
6
Adjust volume level at
switch-on.
Set the minutes.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
82
SLEEP TIMER SETTING
You do not have to remember to switch the Monitor set off before you go to sleep.
The sleep timer automatically switches the Monitor set to standby after the preset time has elapsed.
1
2
Select Sleep Timer.
Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min.
• When you switch the Monitor set off, the preset sleep timer is cancelled.
• You can also adjust Sleep Timer in the TIME menu.
TIME SETTING
83
OPTION SETTING
COUNTRY SELECTION
The installation guide menu appears on the Monitor set screen when it is switched on for the first
time.
1
Select your country.
• If you want to change Country selection
1
MENU
Select OPTION.
2
Select Country.
3
Select your country.
4
OPTION SETTIN
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
! NOTE
►If
► you do not finish the set-up Installation Guide by pressing BACK or if you time out on the OSD (On
Screen Display) the installation menu will continuously appear until the set up is completed whenever
the TV is switched on.
►If
► you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation.
►DTV
►
mode control buttons may not function based on country broadcasting circumstances.
►In
► country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending
on digital broadcasting circumstances.
84
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a
selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not
supported, you can select language in secondary category.
1
MENU
1
Select OPTION.
2
Select Audio Language or
Subtitle Language.
3
MENU
Select OPTION.
2
Select Disabled Assistance.
3
Select Hard of Hearing(ꔣ).
Select your desired language.
4
4
Save.
Select On or Off.
• Press the BACK button to move to the previous menu screen.
Audio Language OSD Information
Display
Not Available
1
2
3
Status
MPEG Audio
Dolby Digital Audio
Select Audio.
Audio for “Visual Impaired”
OPTION SETTING
< Audio Language Selection >
sWhen two or more audio languages are broadcast, you can select the audio language.
Audio for “Hearing Impaired”
Select an audio language.
Dolby Digital Plus Audio
AAC Audio
Select L+R, L+L or R+R.
< Subtitle Language Selection >
sWhen two or more subtitle languages are broadcast, you can select the subtitle language
with the SUBTITLE button on the remote control.
sPress the ꕭꕮ button to select a subtitle language.
Subtitle Language OSD Information
Display
Status
Not Available
Teletext Subtitle
Subtitle for “Hard of Hearing”
• The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service
provider.
• When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the Monitor set may output a part of the Main audio.
85
OPTION SETTING
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY)
This function is for the blind, and provides explanatory audio describing the current situation in a TV
programme in addition to the basic audio.
When Audio Description On is selected, basic audio and Audio Description are provided only for those
programmes that have Audio Description included.
OPTION
Move
Audio Language
: English
Subtitle Language : English
ꔋ
Disabled
Disabled Assistance
Assistance
Country OPTION
OK
: ­Australia
Input Label
OPTION SETTING
2
3
4
MENU
OK
: English
Subtitle Language : English
Disabled
Disabled Assistance
Assistance
ꔋ
Hard of Hearing(ꔣ)
: ­Australia
Country ◄
Audio Description
Input Label
Set ID
:1
Set ID
: 1 Volume
Power Indicator
:On
Power Indicator
:On
Demo Mode
:Off
Demo Mode
:Off
ꔏ
1
➩
Move
Audio Language
Off
►
Antenna
0
Close
ꔏ
Select OPTION.
Select Disabled Assistance.
Select Audio Description.
Select On or Off.
Adjustment for Audio Description Volume With selecting On
5
6
Select Volume.
Make desired adjustment.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
86
DATA SERVICE
(This menu is enabled only in South Africa. )
This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at the
same time.
If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected.
OPTION
Move
OPTION
OK
Audio Language
: English
Subtitle Language : English
Subtitle Language : English
Country : ­Australia
Data
Data Service
Service
:: MHEG
MHEG
ꔋ
Input Label
Country Data
Data Service
Service
: ­Australia
MHEG
MHEGMHEG
:: MHEG
ꔋ
ꔋ
Teletext
Input Label
:1
Set ID
:1
Power Indicator
:On
Power Indicator
:On
ꔏ
Select Data Service.
3
Select MHEG or Teletext.
OPTION SETTING
Select OPTION.
2
4
➩
Disabled Assistance
Set ID
ꔏ
MENU
OK
: English
Disabled Assistance
1
Move
Audio Language
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
87
OPTION SETTING
INPUT LABEL
Selects a label for each input source.
OPTION
Move
OPTION
OK
Move
OK
Audio Language
: English
Audio Language
: English
Subtitle Language : English
Subtitle Language : English
AV
Disabled Assistance
Country ➩
: ­Australia
ꔋ
Input
Input Label
Label
Disabled Assistance
Country Input
Input Label
Label
Component
: ­Australia
RGB
Set ID
:1
Set ID
:1
Power Indicator
:On
Power Indicator
:On
:Off
Demo Mode
Demo Mode
ꔏ
HDMI1
◄
►
ꔋ
HDMI2
:Off
ꔏ
Close
If you want to use HDMI-PC mode, you must set the input label to PC mode.
(Refer to the below figure)
OPTION
Move
OK
Audio Language
: English
Subtitle Language : English
AV
Disabled Assistance
Country Input
Input Label
Label
Set ID
Power Indicator
OPTION SETTING
Demo Mode
Component
: ­Australia
RGB
:1
:On
HDMI1
HDMI2
:Off
2
3
4
MENU
PC
◄
PC
►
Close
ꔏ
1
ꔋ
Select OPTION.
Select Input Label.
Select the source.
Select the label.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
88
POWER INDICATOR
Select the power indicator on of off.
Power indicator On
- Normal Mode: Blue LED On.
- Off Mode: LED Off
Power indicator Off
- Normal Mode: Blue LED Off.
- Off Mode: LED Off
OPTION
Move
OPTION
OK
: English
Audio Language
: English
Subtitle Language : English
Subtitle Language : English
Disabled Assistance
Country ➩
: ­Australia
Input Label
3
Disabled Assistance
Country : ­Australia
Set ID
:1
Power
Power Indicator
Indicator
::On
On
Demo Mode
:Off
ꔋ
Set ID
:1
Power
Power Indicator
Indicator
::On
OnOff
On
On
:Off
Demo Mode
ꔋ
ꔋ
ꔏ
OPTION SETTING
2
MENU
OK
Input Label
ꔏ
1
Move
Audio Language
Select OPTION.
Select Power Indicator.
Select On or Off.
4
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
89
OPTION SETTING
DEMO MODE
Display the slide show to explain the various logo of this Monitor set.
It is not possible to use Demo Mode in Home Use mode.
In Store Demo, Demo Mode is automatically set to On.
Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset.
The screen is reset automatically after 5 minutes in Demo Mode.
OPTION
Move
OPTION
OK
ꔎ
Disabled Assistance
Country Set ID
:1
Power Indicator
:On
Demo
Demo Mode
Mode
::Off
Off
Mode Setting
: Home Use
➩
ꔋ
Factory Reset
OPTION SETTING
2
3
4
MENU
OK
Disabled Assistance
: ­Australia
Input Label
1
Move
ꔎ
Country : ­Australia
Input Label
Set ID
:1
Power Indicator
Demo
Demo Mode
Mode
:On
Off
::Off
OffOff
Mode Setting
On Use
: Home
ꔋ
ꔋ
Factory Reset
Select OPTION.
Select Demo Mode.
Select On to show the various logo of Monitor set.
Return to Monitor set viewing.
If you want to stop the demo, press any button. (Except for MUTE,
+ , - button)
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
90
MODE SETTING
We recommend setting the Monitor set to “Home Use” mode for the best picture in your home environment.
“Store Demo” mode is an optimal setting for displaying at stores..
OPTION
Move
OPTION
OK
ꔎ
Disabled Assistance
Country Set ID
:1
Power Indicator
:On
Demo Mode
:Off
Mode Setting
Setting
Mode
Home Use
Use
:: Home
➩
ꔋ
: ­Australia
Input Label
Set ID
Demo Mode
:1
Selecting the environment.
:On
Choose the setting mode you want.
:Off
Mode Setting
Setting
Mode
Home Use
Use
:: Home
Factory Reset
Store Demo
ꔋ
Home Use
Select [Home Use] to use this TV at home.
To use this TV at store, select [Store Demo].
Select Mode Setting.
3
OPTION SETTING
Select OPTION.
2
4
Country Power Indicator
Factory Reset
MENU
OK
Disabled Assistance
: ­Australia
Input Label
1
Move
ꔎ
Select Store Demo or Home Use.
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
91
OPTION SETTING
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings.
But the settings of ꕬ Day and ꕬ Night of the Picture Mode cannot be initialized.
It is useful to initialize the product or when you move to other city or country.
When the Factory Reset is completed, you must restart the Initializing setup.
When the Lock System menu is "On", the message to enter the password appears.
OPTION
Move
OPTION
OK
ꔎ
Disabled Assistance
Country Move
OK
ꔎ
Disabled Assistance
: ­Australia
➩
Input Label
Country : ­Australia
Input Label
Set ID
:1
Set ID
:1
Power Indicator
:On
Power Indicator
:On
Demo Mode
:Off
Demo Mode
:Off
Mode Setting
: Home Use
Factory
Factory Reset
Reset
Mode Setting
ꔋ
Factory
Factory Reset
Reset
All user settings and channel
settings will be reset. Still
: Home Use
Continue?
ꔋ
Yes
OPTION SETTING
1
2
3
4
MENU
No
• In Lock System "On", if you forget your Select OPTION.
password, press '0', '3', '2', '5' on the remote
Select Factory Reset.
control handset.
Select Yes.
Start Factory Reset.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
92
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
If a channel is locked, enter the password to unlock it temporarily.
LOCK
Move
LOCK
OK
Set Password
Lock
LockSystem
System 1
2
4
5
OK
ꔋ
: :Off
Off
• Block Programme
• Parental Guidance
• Input Block
Key Lock
: Off
Select LOCK.
Lock
LockSystem
System ➩
Off
Off
: :Off
Off
ꔋ
On Programme
• Block
• Parental Guidance
• Input Block
Key Lock
: Off
ꔋ
• If you forget your password, press ‘0’, ‘3’, ‘2’, ‘5’ on
the remote control handset.
Select Lock System.
Select On.
Set the password.
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password for confirm.
PARENTAL CONTROL / RATINGS
3
MENU
Move
Set Password
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
93
PARENTAL CONTROL / RATINGS
BLOCK PROGRAMME
Blocks any programmes that you do not want to watch or that you do not want your children to watch.
This function is available in Lock System “On”.
Enter a password to watch a blocked programme.
1
LOCK
Move
1 ABC TV Sydney
Set Password
Lock System RADIO
DTV
YLE TV1
OK
9 Nine Digital
10 ABC2
: ON
11 ABC TV
12 ABC HDTV
•• Block
Block Programme
Programme ꔋ
13 ABC TV 1
14 ABC TV 2
70 7 HD Digital
71 7 Digital 1
72 7 Digital 2
73 7 Digital 3
• Parental Guidance
• Input Block
Key Lock
: Off
➩
Pr. Change
TV
7 7 Guide
77 7 Guide
90 Nine Digital HD
99 Nine Guide
100 ABC TV 3
Navigation
Page Change
Previous
Block / Unblock
1
2
PARENTAL CONTROL / RATINGS
3
4
MENU
Select LOCK.
Select Block Programme.
Enter the Block Programme.
GREEN Select a programme to be locked.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
94
PARENTAL CONTROL (IN DIGITAL MODE ONLY)
This function operates according to information from the broadcasting station. Therefore if the signal
has incorrect information, this function does not operate.
A password is required to gain access to this menu.
This set is programmed to remember which option it was last set to even if you switch the set off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
Enter a password to watch a blocked programme.
LOCK
Move
LOCK
OK
Set Password
Lock System : ON
• Block Programme
• Parental Guidance ꔋ
Move
OK
Set Password
• Input Block
Key Lock
: Off
➩
Lock System : ON
• Block Programme
Blocking Off : Permits all
programmes
• Parental Guidance ꔋ
• Input Block
Blocking Off : Permits all
Key Lock
: Off
programmes
Block All
G
PG
M
MA
AV
R
Blocking Off
(Only Australia)
Blocking Off : Permits all
programmes
4 and above
5 and above
6 and above
7 and above
8 and above
9 and above
10 and above
11 and above
12 and above
Block All
G
PG
M
MA
AV
R
ꔗ
Blocking Off
v
ꔗ
(Only New Zealand)
Blocking Off
(Only South Africa)
Select LOCK.
2
Select Parental Guidance.
3
Make appropriate adjustments.
4
PARENTAL CONTROL / RATINGS
1
MENU
ꔗ
Save
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
95
PARENTAL CONTROL / RATINGS
INPUT BLOCK
Enables you to block an input.
It is available to use this function in Lock System ”On”.
LOCK
Move
LOCK
OK
Set Password
: ON
• Block Programme
Lock System • Parental Guidance
• Input Block
Key Lock
OK
Set Password
Lock System Move
ꔋ
: Off
➩
Key Lock
: ON
AV
• Block Programme
Component
• Parental Guidance
RGB
• Input Block
ꔋ
: Off HDMI1
◄
HDMI2
Off
►
Off
Off
Off
Off
Close
1
PARENTAL CONTROL / RATINGS
MENU
Select LOCK.
2
Select Input Block.
3
Select input source.
4
Select On or Off.
5
Save
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
96
KEY LOCK
The Monitor set can be set so that the remote control is required to control it. This feature can be
used to prevent unauthorized viewing.
LOCK
Move
LOCK
OK
Set Password
1
MENU
: Off
• Block Programme
• Parental Guidance
• Input Block
Lock System : Off
• Block Programme
• Parental Guidance
KeyLock
Lock
Key
• Input Block
: :Off
ꔋ
Off
Off
On
On
ꔋ
•In Key Lock ‘On’, if the Monitor set is turned
off, press the INPUT, P ꕭ or ꕮ button on the
Monitor set or POWER, INPUT, P ꕭꕮ, TV/PC
Select Key Lock.
or NUMBER buttons on the remote Select On or Off.
•With the Key Lock On, the display ‘
Key Lock
On ’ appears on the screen if any button on the
front panel is pressed while viewing the Monitor
Save.
set.
PARENTAL CONTROL / RATINGS
control then the set will be turned on.
3
4
➩
: :Off
ꔋ
Off
Select OPTION.
2
OK
Set Password
Lock System KeyLock
Lock
Key
Move
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
97
TO USE A USB DEVICE
WHEN CONNECTING A USB DEVICE
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated or while the Bluetooth Headset is connected.
When the Pop Up menu does not appear, you can select Music List, Photo List or Movie List in the
USB menu.
In USB device, you can not add a new folder or delete the existing folder.
Connect the USB device to the USB IN jack
on the Monitor set.
• Only photo(JPEG), music (MP3) and movie
(DAT, MPG, MPEG, VOB, AVI, DIVX, MP4,
MKV, TS, TRP, TP) are supported.
USB IN
1
When removing the USB device
2
Select PHOTO LIST, MUSIC LIST or
MOVIE LIST
PHOTO LIST
3
TO USE A USB DEVICE
98
MUSIC LIST
MOVIE LIST
Select the USB Device menu before removing
the USB device.
1
2
Select USB Device.
Select Eject.
Precautions when using the USB device
TO USE A USB DEVICE
►►Only a USB storage device is recognizable.
►►If the USB storage device is connected through a USB hub, the device is not recognizable.
►►A USB storage device using an automatic recognition programme may not be recognized.
►►A USB storage device which uses its own driver may not be recognized.
►►The recognition speed of a USB storage device may depend on each device.
►►Please do not turn off the Monitor set or unplug the USB device when the connected USB storage device is
working. When such device is suddenly separated or unplugged, the stored files or the USB storage device
may be damaged.
►►Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may
cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which
has normal music files, image files or movie files.
►►Please use only a USB storage device which was formatted as a FAT, FAT16, FAT32, NTFS file system provided with the windows operating system. In case of a storage device formatted as a different utility programme
which is not supported by Windows, it may not be recognized.
►►If the file system of a USB storage is not FAT systems, the HD movies are abnormally played sometime.
►►Please connect power to a USB storage device(over 0.5 A) which requires an external power supply. If not,
the device may not be recognized.
►►Please connect a USB storage device with the cable offered by the device maker.
►►Some USB storage devices may not be supported or operated smoothly.
►►File alignment method of USB storage device is similar to Window XP and filename can recognize up to
100 English characters.
►►Be sure to back up important files since data stored in a USB memory device may be damaged. We will not
be responsible for any data loss.
►► If the USB HDD does not have an external power source, the USB device may not be detected. So be sure
to connect the external power source.
- Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source.
►►Data in a USB storage device cannot be deleted in the NTFS file system.
►►If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to
4 partitions or USB memory devices.
►►Only the FAT, FAT16, FAT32 file system supports the delete function.
►►If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.
►►If the USB memory device does not work properly, disconnect and reconnect it.
►►How fast a USB memory device is detected differs from device to device.
►►If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the Monitor
set is turned on.
►►The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.
►►Any device with more than the recommended capacity may not work properly.
►►If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on
again to make it work properly.
►►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
►►When a broken file is played in the USB storage, the Monitor set may turn off or work abnormally.
99
TO USE A USB DEVICE
PHOTO LIST
You can view photo files on USB storage device.
The On Screen Display may be different from your Monitor set. Images are an example to assist with the
Monitor set operation.
When you are watching the photo by the Photo List function, you can not change the picture mode.
PHOTO(*.JPEG) supporting file
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
• You can play JPEG files only.
• Non-supported files are displayed in the form of predefined icon.
Screen Components
2
1
MENU
Select Photo List.
Select USB.
TO USE A USB DEVICE
2
1 Moves to upper level folder.
2 Current page / Total pages.
Photo List
3 Total number of marked photos.
Page 2/3
Drive1
SGKIM001
4 Corresponding buttons on the
remote control.
1
Up Folder
Navigation
No Marked
Up Folder
1366x768, 125KB
Popup Menu
4
100
3
SG103
02/12/2010
SG101
02/12/2010
SG104
02/12/2010
SG102
02/12/2010
SG105
02/12/2010
SGKIM001
02/12/2010
SGKIM005
02/12/2010
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Page Change
MARK
Mark
Exit
Photo Selection and PopUp Menu
Photo List
Page 2/3
Drive1
SGKIM001
1366x768, 125KB
Up Folder
Navigation
No Marked
Up Folder
SG103
02/12/2010
SG101
02/12/2010
SG104
02/12/2010
SG102
02/12/2010
SG105
02/12/2010
SGKIM001
02/12/2010
SGKIM005
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Popup Menu
Page Change
MARK
02/12/2010
Mark
Exit
➩
Photo List
Page 2/3
Drive1
SGKIM001
Up Folder
1366x768, 125KB
Up Folder
Navigation
No Marked
Popup Menu
SG103
02/12/2010
SG101
02/12/2010
SG104
SG102
02/12/2010
SG105
SGKIM001
02/12/2010
SGKIM005
02/12/2010
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Page Change
02/12/2010
1366x768, 125KB
02/12/2010
ꔋ
View
Mark All
Delete
Close
MARK
Mark
►►View: Display the selected item.
►►Mark All: Mark all photos on the screen.
►►Unmark All: Deselect all marked photos.
►►Delete or Delete Marked: Delete the selected
photo item.
►►Close: Close the pop-up menu.
Exit
1
Select the target folder or drive.
2
Select the desired photos.
3
4
Select the desired PopUp menu.
TO USE A USB DEVICE
Show the PopUp menu.
• Use the P ꕭꕮ button to navigation in
the photo page.
• Use the MARK button to mark or
unmark a photo. When one or more
photos are marked, you can view each
marked photo or a slide show of the
marked photos. If no photos are
marked, you can view every individual
photo in the folder or a slide show of all
photos in the folder.
• Press the BACK button to move to the previous menu screen.
101
TO USE A USB DEVICE
Detailed operations are available on full-sized photo view screen.
Photo List
Page 2/3
Drive1
SGKIM001
1366x768, 125KB
Up Folder
Navigation
No Marked
Up Folder
SG103
02/12/2010
SG101
02/12/2010
SG104
02/12/2010
SG102
02/12/2010
SG105
02/12/2010
SGKIM001
02/12/2010
SGKIM005
02/12/2010
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Popup Menu
Page Change
MARK
Mark
Exit
➩
Photo List
Page 2/3
Drive1
SGKIM001
1366x768, 125KB
Up Folder
Navigation
No Marked
Up Folder
Popup Menu
SG103
02/12/2010
SG101
02/12/2010
SG104
SG102
02/12/2010
SG105
SGKIM001
02/12/2010
SGKIM005
02/12/2010
SGKIM002
02/12/2010
SGKIM006
02/12/2010
SGKIM003
02/12/2010
SGKIM007
02/12/2010
SGKIM004
02/12/2010
SGKIM008
02/12/2010
Page Change
02/12/2010
1366x768, 125KB
02/12/2010
➩
◄
ꔋ
View
Slideshow ꘡
Mark All
BGM ꘡
1/17
꘤
Delete
►
Q.MENU
Option
Hide
Delete
Close
MARK
Mark
Exit
The aspect ratio of a photo may change the size of the photo
displayed on the screen in full size.
Press the BACK button to move to the previous menu screen.
1
Select the target folder or drive.
2
• Use the P ꕭꕮ button to navigation in
the photo page.
TO USE A USB DEVICE
Select the desired photos.
3
Show the PopUp menu.
4
Select View.
5
The selected photo is displayed in full size.
• Press the BACK button to move to the previous menu screen.
102
6
◄
Slideshow ꘡
BGM ꘡
1/17
꘤
Delete
►
Q.MENU
Option
Hide
Select the Slideshow , BGM, ꘤
(Rotate), Delete , Option or Hide.
• Use < > button to select the previous or
next photo.
• Use < > button to select and control the
menu on the full-sized screen.
►►Slideshow : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos
are selected, those photos are displayed in a slide show.
■■Set the time interval of the slide show in Option.
►►BGM (Background Music): Listen to music while viewing photos
in full size.
■■Set the Music Folder for BGM in Options before using
this function.
►►Delete: Delete photos.
►►Option: Set values for Sl ide Speed and Music Folder for BGM.
■■Use ꕭꕮ < > button and OK button to set values. Press
OK to save the settings.
■■You cannot change Music Folder while BGM is playing.
TO USE A USB DEVICE
►► ꘤ (Rotate): Rotate photos.
■■Rotates the photo 90°, 180°, 270°, 360° clockwise.
■■It can not be rotate when the width of a picture is bigger than supported height.
►►Hide: Hide the menu on the full-sized screen.
■■To see the menu again on the full-sized screen, press
OK button to display.
103
TO USE A USB DEVICE
Using the Photo List function
Choose Options.
Set Photo View
Set Video.
◄
Slideshow ꘡
►
1/17
꘤
BGM ꘡
Set Audio.
Delete
Q.MENU
Option
Hide
ꕪ Previous
1
Show the PopUp menu.
2
Select Set Photo View, Set Video or Set Audio.
►When
►
you select the Set Photo View,
Set Photo View.
Slide Speed
◄
Music Folder
TO USE A USB DEVICE
104
Fast
►
...
Repeat
◄
On
►
Random
◄
Off
►
ꕪ Previous
1
Show the Slide Speed or Music Folder.
2
Make appropriate adjustments.
• When “Off” is selected in Repeat
menu, replay will stop once the last file
in the list finishes playing. But, when
“►►” button is pressed while the last
fine in the list is in the middle of replay
and “Repeat” is in “Off” position, the
first file in the list will be played and
“Repeat” menu will be activated.
►When
►
you select the Set Video,
Set Video.
Picture Mode
◄
Vivid
►
● Dynamic Contrast
◄
Medium
►
● Noise Reduction
◄
Medium
►
● Backlight
100
● Contrast
100
● Brightness
50
● Colour
50
● Picture Reset
ꕪ Previous
1
Make appropriate adjustments.(Refer to p. 61, 64, 65)
►When
►
you select the Set Audio,
Set Audio.
Sound Mode
◄
Standrd
►
• Auto Volume
◄
Off
►
• Clear Voice II
◄
Off
►
• Balance
0
ꕪ Previous
Show the Sound Mode, Auto Volume, Clear Voice II, Balance.
2
Make appropriate adjustments. (Refer to p. 71 to 75)
TO USE A USB DEVICE
1
105
TO USE A USB DEVICE
MUSIC LIST
You can play music files on USB storage device.
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be
supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your Monitor set. Images are an example to assist with
the Monitor set operation.
MUSIC (*.MP3) supporting file
Bit rate 32 to 320
• Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz
• Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz
• Sampling rate MPEG2.5 Layer3: 8 kHz, 11.025 kHz, 12 kHz
Screen Components
2
1
MENU
Select Music List.
Select USB.
TO USE A USB DEVICE
3
1 Preview: If any album jacket for
the file (Album Art Image)
Music List
exists, this jacket is displayed.
2 Moves to upper level folder.
1
3 Current page / Total pages.
Page 2/3
remote control.
00:00/01:34
Up Folder
Navigation
Duration
Up Folder
title.
2
No Marked
Title
Music
SGKIM003
4 Total number of marked music
5 Corresponding buttons on the
Popup Menu
SGKIM001
03:33
SGKIM002
04:45
SGKIM003
01:30
SGKIM004
02:37
SGKIM005
01:58
Page Change
5
106
4
MARK
Mark
Q.MENU
Option
Exit
Music Selection and PopUp Menu
As shown, up to 6 music titles are listed per page.
Music List
No Marked
Duration
Up Folder
00:00/01:34
Up Folder
Navigation
Page 2/3
Title
Music
SGKIM003
SGKIM001
03:33
SGKIM002
04:45
SGKIM003
01:30
SGKIM004
02:37
SGKIM005
01:58
Popup Menu
MARK
Page Change
Mark
Q.MENU
Option
Exit
➩
Music List
Page 2/3
No Marked
Title
Music
SGKIM003
Up Folder
SGKIM001
SGKIM002
SGKIM003
00:00/01:34
Up Folder
Navigation
Popup Menu
SGKIM004
Duration
4395KB 1Kbps
Play
ꔋ
Play with Photo
Mark All
Delete
Close
04:45
01:30
02:37
01:58
SGKIM005
Page Change
03:33
MARK
Mark
Q.MENU
Option
Exit
►►Play (During stop): Play the selected music titles.
One playback of a piece of music finishes, the
next selected one will be played. When there
are no selected music titles to play, the next
one in the current folder will be played. If you
go to a different folder and press the OK button, the current music in playback will
stop.
►►Play Marked: Play the selected music titles. Once a
music finishes playing, the next selected one will be
played automatically.
►►Stop Play (During playback): Stop the playing music
titles.
►►Play with Photo: Start playing the selected music titles
and then move to the Photo List.
►►Mark All: Mark all music titles in the folder.
►►Unmark All: Deselect all marked music titles.
►►Delete or Delete Marked: Delete the selected music
titles.
►►Close: Close the pop-up menu.
1
Select the target folder or drive.
2
Select the desired photos.
Show the PopUp menu.
4
Select the desired PopUp menu.
TO USE A USB DEVICE
3
• Use the P ꕭꕮ button to navigate up/
down in the music page.
• Use MARK button to mark or unmark a
music. When one or more music files
are marked, the marked music title will
be played in sequence. For example, if
you want to listen to only one music
repeatedly, just mark the music only and
play it. If no music is marked, all the
music in the folder will be played in
sequence.
• Press the BACK button to move to the previous menu screen.
107
TO USE A USB DEVICE
■■ If you don't press any button for a while during the playing, the play information
box (as shown in the below) will float as a screen saver.
■■ The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.
Music
S003
► 0:27 / 3:67
Q.MENU
Option
! NOTE
►When
►
a music file is played, ♪ is displayed behind the title.
►A
► damaged or corrupted music does not play but displays 00:00 in playtime.
►A
► music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
►If
► you press OK, ꔠ buttons, screen saver is stopped.
►The
►
PLAY(►), Pause(II), ꔠ, ►►, ◄◄ buttons on the remote control are also available in this mode.
►You
►
can use the ►► button to select the next music and the ◄◄ button to select the previous
music.
Using the Music List function, play
TO USE A USB DEVICE
Music List
Page 2/3
Duration
Up Folder
00:00/01:34
Up Folder
Navigation
No Marked
Title
Music
SG003
Popup Menu
S001
03:33
S002
04:45
S003
01:30
S004
02:37
S005
01:58
Page Change
MARK
Mark
Q.MENU
Option
Choose Options.
Set Audio Play.
Set Audio.
Exit
1
Show the PopUp menu.
2
Select Set Audio Play or Set Audio.
108
ꕪ Previous
►When
►
you select the Set Audio Play,
Set Audio Play.
◄
Repeat
Random
On
►
Off
ꕪ Previous
1
Show the Set Audio Play.
2
Make appropriate adjustments.
• When “Off” is selected in Repeat
menu, replay will stop once the last file
in the list finishes playing. But, when
“►►” button is pressed while the last
fine in the list is in the middle of replay
and “Repeat” is in “Off” position, the
first file in the list will be played and
“Repeat” menu will be activated.
►When
►
you select the Set Audio,
Set Audio.
Sound Mode
◄
Standrd
►
• Auto Volume
◄
Off
►
◄
Off
►
• Clear Voice II
• Balance
0
1
Show the Sound Mode, Auto Volume, Clear Voice II, Balance.
2
TO USE A USB DEVICE
ꕪ Previous
Make appropriate adjustments. (Refer to p. 71 to 75)
109
TO USE A USB DEVICE
MOVIE LIST
You can play movie files on a USB storage device.
The movie list is activated once USB is detected. It is used when playing movie files on Monitor set.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
It is a movie list that displays folder information and movie file.
The On Screen Display may be different from your Monitor set. Images are an example to assist with
the Monitor set operation.
TO USE A USB DEVICE
110
Movie(*.dat/*.mpg/*.mpeg/*.ts/*.trp/*.tp/*.vob/*.mp4/*.mkv/*.avi/*.divx) supporting file
Video format :DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid 1.10- beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC
Audio format: Dolby Digital, AAC, Mpeg, MP3, LPCM, HE-AAC
Bit rate: within 32 kbps to 320 kbps (MP3)
Subtitle format: *.smi/*.srt/*.sub(MicroDVD, SubViewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.
psb(PowerDivx).
• Some user-created subtitles may not work properly.
• Some special characters are not supported in subtitles.
• HTML tags are not supported in subtitles.
• Subtitles in languages other than the supported languages are not available.
• Time information in an external subtitle file should be arranged in ascending order to be played.
• The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the
audio language is changed.
• A damaged movie file may not be played correctly, or some player functions may not be usable.
• Movie files produced with some encoders may not be played correctly.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• HD videos with a maximum of 1920 x 1080 @ 25/30P or 1280 x 720 @ 50/60P are supported,
depending on the frame.
• Videos with resolutions higher than 1920 x 1080 @ 25/30P or 1280 x 720 @ 50/60P may not
work properly depending on the frame.
• Movie files other than the specified types and formats may not work properly.
• Max bitrate of playable movie file is 20 Mbps.
• We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
• DTS Audio codec is not supported.
• A movie file more than 30GB in file size is not supported for playback.
• A DivX movie file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
• Playing a video via a USB connection that doesn’t support high speed may not work properly..
• Files encoded with GMC (Global Motion Compensation) may not be played.
• When you are watching the movie by Movie List function, you can adjust an image by Energy
Saving key on the remote control. User setup for each image mode does not operate.
File
Max
Resolution
Video Decoder
Audio Codec
mpeg, vob
MPEG1, MPEG2
Dolby Digital, MPEG, MP3, LPCM
dat
MPEG1
Dolby Digital, MPEG, MP3, LPCM
ts,trp,tp
MPEG2, H.264/AVC
Dolby Digital, AAC, MPEG
mp4
MPEG4 SP, MPEG4 ASP, Divx 3.11, Dvix 4.12,
Dvix 5.x, Dvix 6, Xvid 1.00, Xvid 1.01, Xvid 1.02,
Xvid 1.03, Xvid 1.10–beta 1, Xvid 1.10-beta 2,
H.264/AVC
Dolby Digital, HE-AAC,
AAC, MPEG, MP3, LPCM
avi
MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11,
Divx 4, Divx 5, Divx 6, Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03, Xvid 1.10–beta 1,
Xvid 1.10–beta 2, H.264/AVC
Dolby Digital, HE-AAC, AAC,
MPEG, MP3,LPCM
mkv
H.264/AVC, MPEG 1, MPEG 2, MPEG 4 SP ,
MPEG4 ASP
Dolby Digital,HE-AAC,
AAC, MPEG, MP3, LPCM
divx
MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11,
Divx 4, Divx 5, Divx 6, Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03, Xvid 1.10–beta 1,
Xvid 1.10–beta 2, H.264/AVC
Dolby Digital, HE-AAC, AAC,
MPEG, MP3, LPCM
Extension
name
1920 x 1080 @
30p
Screen Components
2
1
MENU
Select Movie List.
Select USB.
3
Page 2/3
No Marked
1 Moves to upper level folder.
2 Current page/Total pages.
Movie List
3 Total number of marked movie
title.
Title
Movie
SGKIM002
4 Corresponding buttons on the
Duration
Up Folder
remote control.
Favorite Music
SGKIM001
640x480, 720KB
1
Up Folder
Navigation
Popup Menu
SGKM002
01:34:15
SGKIM001
01:35:30
SGKIM001
01:30:20
Page Change
MARK
Mark
TO USE A USB DEVICE
2
Exit
4
111
TO USE A USB DEVICE
Movie Selection and PopUp Menu
Movie List
Page 2/3
No Marked
Title
Movie
SGKIM002
Duration
Up Folder
Favorite Music
SGKIM001
640x480, 720KB
Up Folder
Navigation
SGKM002
01:34:15
SGKIM001
01:35:30
SGKIM001
01:30:20
Popup Menu
Page Change
MARK
Mark
Exit
➩
Movie List
Page 2/3
No Marked
Title
Movie
SGKIM002
Duration
1366x768, 125KB
Up Folder
Play
Favorite Music
SGKIM001
Delete
SGKM002
640x480, 720KB
Up Folder
Navigation
Popup Menu
Close
SGKIM001
01:34:15
01:35:30
01:30:20
SGKIM001
Page Change
ꔋ
Mark All
MARK
Mark
Exit
►►Play: Play the selected movie. Divx Play is executed
while screen changes.
►►Mark All: Mark all Movie in the folder.
►►Unmark All: Deselect all marked movies.
►►Delete or Delete Marked: Delete the selected Movie
item.
►►Close: Close the pop-up menu.
1
Select the target folder or drive.
2
Select the desired movie title
TO USE A USB DEVICE
3
Show the PopUp menu.
• Use the P ꕭꕮ button to navigation in
the movie page.
• Use MARK button to mark or unmark a
movie. When one or more movie files
are marked, the marked movies will be
played in sequence.e.
4
Select the desired PopUp menu.
• Press the BACK button to move to the previous menu screen.
! NOTE
►In
► the case of files not supported, a message regarding non-supported file is displayed.
112
Using the Movie List function, play
Choose Options.
Set Video Play.
Set Video.
Set Audio.
ꕪ Previous
Q.MENU
Option
1
Show the PopUp menu.
2
Select Set Video Play, Set Video or Set Audio.
TO USE A USB DEVICE
113
TO USE A USB DEVICE
►When
►
you select the Set Video Play,
◄
Picture Size
Audio Language
Subtitle Language
Full
►
1
Off
. Sync
0
. Position
0
ꕪNormal
Previous
. Size
ꕪ Previous
►►Picture Size: Selects your desired picture format during
movie play.
►►Audio Language & Subtitle Language: Changes the
Language Group of the audio/subtitle during movie play.
►►Sync: Adjusts the time synchronization of the subtitle from
-10 secs to +10 secs by steps of 0.5 secs during movie play.
►►Position: Changes the position of the subtitle either up or
down during movie play.
►►Size: Selects your desired Subtitle size during movie play.
1
Show the Picture Size, Audio Language or Subtitle Language.
2
Make appropriate adjustments.
TO USE A USB DEVICE
! NOTE
►In
► New Zealand the only language supprorted for subtitles is English.
114
►When
►
you select the Set Video,
Set Video.
Picture Mode
◄
Vivid
►
● Dynamic Contrast
◄
Medium
►
● Noise Reduction
◄
Medium
►
● Backlight
100
● Contrast
100
● Brightness
50
● Colour
50
● Picture Reset
ꕪ Previous
1
Make appropriate adjustments.(Refer to p. 61, 64, 65)
►When
►
you select the Set Audio.
Set Audio.
Sound Mode
◄
Standrd
►
• Auto Volume
◄
Off
►
• Clear Voice II
◄
Off
►
• Balance
0
ꕪ Previous
Show the Sound Mode, Auto Volume, Clear Voice II, Balance.
2
Make appropriate adjustments. (Refer to p. 71 to 75)
TO USE A USB DEVICE
1
115
TO USE A USB DEVICE
Using the remote control
◄◄ / ►►
When playing,
repeatedly, press the REW(◄◄) button to speed up ◄◄(x2) → ◄◄◄
(x4) → ◄◄ ◄◄ (x8) → ◄◄◄◄◄(x16) → ◄◄◄◄◄◄(x32) .
repeatedly, press the FF(►►) button to speed up ►►(x2) → ►►► (x4)
→ ►►►► (x8) → ►►►►►(x16) → ►►►►► (x32).
■■ Pressing these buttons repeatedly increases the fast forward/reverse
speed.
ll
During playback, press the Pause (II) button.
■■ Still screen is displayed.
■■ If no buttons are pressed on the remote control for 10 minutes after
pausing, the TV returns to the playback state.
■■ Press the Pause (II) button and then use the FF (►►) button for slow
motion.
< >
When using the < or > button during playback a cursor indicating the
position can be viewed on the screen.
Play(►)
Press the Play(►) button to return to normal playback.
Press the ENERGY SAVING button repeatedly to increase the brightness of
your screen. (Refer to p. 59)
TO USE A USB DEVICE
116
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the Monitor set. Using the registration number, movies
can be rented or purchased at www.divx.com/vod.
With a DivX registration code from other Monitor set, playback of rented or purchased DivX file is not
allowed. (Only DivX files matched with the registration code of the purchased Monitor set are playable.)
USB
Move
USB
OK
Photo List
Photo List
Music List
Music List
Movie List
DivX
DivX Reg.
Reg. Code
Code
ꔋ
Deactivation
➩
Movie List
DivX
DivX Reg.
Reg. Code
Code
Deactivation
Move
OK
DivX(R) Video On Demand
ꔋ Code is: xxxxxxxxxx
Your registration
To learn more visit www.divx.com/vod.
Close
1
MENU
Select USB.
2
Select DivX Reg. Code.
3
Display DivX Reg. Code.
! NOTE
TO USE A USB DEVICE
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
►Movie
►
files are supported as follows
Resolution: under 1920x1080 WxH pixels
Frame rate: under 30 frames/sec(1920x1080), under 60 frames/sec(under 1280x720)
►Video
►
Codec: MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6,
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid 1.10-beta2
117
TO USE A USB DEVICE
DEACTIVATION
The purpose of deactivation is to allow deactivation of devices for users who have activated all the
available devices through the web server and are blocked from activating more devices. DivX VOD
allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any
of those devices, the consumer had to contact DivX Support and request deletion. Now with this
added feature, consumers will be able to deactivate the device themselves and hence better manage
their DivX VOD devices.
USB
Move
USB
OK
Photo List
Photo List
Music List
Music List
Movie List
DivX Reg. Code
Deactivation
Deactivation
ꔋ
Move
Movie List
➩
DivX Reg. Code
DivX(R) Video On Demand
Deactivation
ꔋ
Deactivation
Do you want to deactivate your device?
Yes
1
MENU
OK
No
➩
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is: xxxxxxxx
To learn more visit www.divx.com/vod.
Close
Select USB.
2
Select Deactivation.
TO USE A USB DEVICE
3
Select Yes.
4
Display Deactivation.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
118
TELETEXT
* This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
The teletext decoder of this set can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number
of pages which are selected by directly entering the corresponding
page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed on
the screen headline. The first page number indicates your selection,
while the second shows the current page displayed.
Press the TEXT or EXIT button to switch off teletext. The previous
mode reappears.
SIMPLE TEXT
■■ Page selection
1 Enter the desired page number as a three-digit number with the NUMBER buttons. If during
selection you press a wrong number, you must complete the three-digit number and then re-enter
the correct page number.
2 The P ꕭꕮ button can be used to select the previous or next page.
TOP TEXT
The user guide displays four fields--red, green, yellow and blue at the bottom of the screen. The yellow
field denotes the next group and the blue field indicates the next block.
■■ Block / group / page selection
2 Use the yellow button to proceed to the next group with automatic overflow to the next block.
3 With the green button you can proceed to the next existing page with automatic overflow to the
next group.
TELETEXT
1 With the blue button you can progress from block to block.
4 Alternatively, the P ꕭ button can be used.
The red button permits you to return to previous selection. Alternatively, the P ꕮ button can be
used.
■■ Direct page selection
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using
the NUMBER buttons in TOP mode.
119
TELETEXT
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
■■ Page selection
1 Press the T.OPT button and then use ꕭꕮ button to select ꕉ menu. Display the index page.
2 You can select the pages which are colour coded along the bottom line with corresponding
coloured buttons.
3 AS with SIMPLE teletext mode, you can select a page by entering its three digit page number
with the NUMBER buttons in FASTEXT mode.
4 The P ꕭꕮ button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTION
■■ Press the T. OPT button and then use ꕭꕮ button to select the Text Option menu.
ꕉ
■■ Index
Select the each index page.
ꕎ
■■ Time
When viewing a TV programme, select this menu to display the time at the top
right hand corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub
page number is displayed at the bottom of the screen. To hold or change the
sub page, press the RED/GREEN, < > or NUMBER buttons.
ꕘ
Text Option
Index
Time
Hold
Reveal
Update
Close
TELETEXT
■■ Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub
pages. The number of sub pages and the sub page displayed is, usually, shown on the screen
below the time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive.
ꕌ
■■ Reveal
Select this menu to display concealed information, such as solutions to riddles or puzzles.
ꕋ
■■ Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear
at the top left hand corner of the screen. When the updated page is available then display will
change to the page number. Select this menu again to view the updated teletext page.
120
DIGITAL TELETEXT
* This feature is not available in all countries.
The TV gives you access to digital teletext which is greatly improved in various aspects such as text,
graphics etc.
This digital teletext can access special digital teletext services and specific services which broadcast
digital teletext.
You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
TELETEXT WITHIN DIGITAL SERVICE
1
Press the numeric or P ꕭꕮ button to select a digital service which broadcasts digital teletext.
2
Follow the indications on digital teletext and move
onto the next step by pressing TEXT, OK, ꕭꕮ< > ,
RED, GREEN, YELLOW, BLUE or NUMBER buttons
and etc.
3
To change digital teletext service, select a different
service by the numeric or P ꕭꕮ button.
TELETEXT IN DIGITAL SERVICE
Press the numeric or P ꕭꕮ button to select a certain service which broadcasts digital teletext.
2
Press the TEXT or coloured button to switch on
teletext.
3
Follow the indications on digital teletext and move
onto the next step by pressing OK, ꕭꕮ< > , RED,
GREEN, YELLOW, BLUE or NUMBER buttons and
so on.
4
Press the TEXT or colour button to switch off digital teletext and return to TV viewing.
Some services may allow you to access text services by pressing the RED button.
DIGITAL TELETEXT
1
121
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
The remote control
doesn’t work
■■ Check to see if there is any object between the product and the
remote control causing
■■ obstruction. Ensure you are pointing the remote control directly at
the set.
■■ Ensure that the batteries are installed with correct polarity (+ to +, - to
-).
■■ Ensure that the correct remote operating mode is set: TV, VCR, etc.
■■ Install new batteries.
Power is suddenly
turned off
■■ Is the sleep timer set?
■■ Check the power control settings. Power interrupted.
■■ If the Monitor set is switched on and there is no input signal, it will
switch off automatically after 15 minutes to save the power
consumption.
■■ When a broken file was played in the USB mode, the Monitor set
may turn off. Please check the file in your usb storage.
■■ Except the screen off mode of the energy saving menu.
The video function does not work.
No picture &No sound
Picture appears slowly
after switching on
No color, poor colour,
or poor picture
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
APPENDIX
122
Lines or streaks
in pictures
No picture
when connecting HDMI
■■ Check whether the product is turned on.
■■ Try another channel. The problem may be with the broadcast.
■■ Is the power cord inserted into wall power outlet?
■■ Check your antenna direction and/or location.
■■ Test the wall power outlet, plug another product’s power cord into
the outlet where the product’s power cord was plugged in.
■■ This is normal, the image is muted during the product startup process. Please contact your service centre, if the picture has not
appeared after five minutes.
■■ Adjust Colour in menu option.
■■ Keep a sufficient distance between the product and the VCR.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the video cables installed properly?
■■ Activate any function to restore the brightness of the picture.
■■ Check for local interference such as an electrical appliance or power
tool.
■■ Station or cable product experiencing problems, tune to another
station.
■■ Station signal is weak, reorient antenna to receive weaker station.
■■ Check for sources of possible interference.
■■ Check antenna (Change the direction of the antenna).
■■ If an HDMI cable doesn’t support High Speed HDMI, it can cause
flickers or no screen display. In this case, use the latest cables that
support High Speed HDMI.
The audio function does not work.
Picture OK & No sound
■■ Press the
+ or - button.
■■ Sound muted? Press MUTE button.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the audio cables installed properly?
No output from one
of the speakers
■■ Adjust Balance in menu option.
Unusual sound from
inside the product
■■ A change in ambient humidity or temperature may result in an
unusual noise when the product is turned on or off and does not
indicate a problem with the product.
No sound when
connecting HDMI
or USB
■■ Check HDMI cable is High Speed HDMI Cable.
■■ Check USB cable over version 2.0.
■■ If the sound is abnormal in the HDMI, check the audio format in
your external equipments.
►►HDMI Audio supported format : Dolby Digital, PCM
►►DTS Audio format is not supported
There is a problem with PICTURE settings.
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of time.
■■ It means that the Monitor set is currently set to Store Demo mode.
To switch to Home use mode you should do the followings:
From the Monitor set Menu, OPTION → Mode Setting → Home use.
Now, you have completed switching to the Home use mode.
Only PC mode applied
No image is displayed.
Power is on, power indictor
is blue but the screen
appears extremely dark.
■■ Adjust brightness and contrast again.
■■ The signal from the PC (Video card) is out of the vertical or
horizontal frequency range of the product.
Adjust the frequency range by referring to the Specifications in this
user’s guide.
Does the ‘Check signal
cable’ message appear?
■■ The signal cable between PC and product is not connected. Check
the signal cable.
■■ Press the ‘INPUT’ button in the remote control to check the input
signal.
APPENDIX
Does the ‘Invalid format’
message appear?
123
APPENDIX
‘Unknown Product’ message appears when the product is connected.
Did you install the driver?
■■ Install the product driver, which is provided with the product, or
download it from the web site. (http://www.lg.com)
■■ See if the plug & play function is supported by referring to the video
card user’s guide.
After-image appears on the product.
After-image appears when
the product is turned off.
■■ If you use a fixed image for a long time, the pixels may be damaged
quickly.
Use the screen saver function.
Screen color is abnormal.
Screen has poor color
resolution (16_colors).
■■ Set screen color resolution to more than 24 bits (true color)
Select control Panel - Display - Settings - Colour Table menu in
Windows.
Screen color is unstable
or mono color.
■■ Check the connection status of the signal cable.
Do back spots appear on
the screen?
■■ Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel.
It is not a malfunction of the LCD.
The screen image looks abnormal.
Is the screen position
wrong?
APPENDIX
124
■■ Adjust the Position menu in OSD.
■■ A See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel-Display-Setting menu.
Do thin lines appear on
the background screen?
■■ Adjust the Clock menu in OSD.
Horizontal noise appears
or the characters look
blurred.
■■ Adjust the Phase menu in OSD.
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new set.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is
almost dry, and then use it to wipe the screen.
2 Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before
switching on.
Cleaning the Cabinet
■■ To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■■ Do not to use a wet cloth.
Extended Absence
WARNING
►►If you expect to leave your Monitor set dormant for prolonged periods (such as a holiday), unplug the
power cord to protect against possible damage from lightning or power surges.
APPENDIX
125
APPENDIX
PRODUCT SPECIFICATIONS
M2380D
M2380DF
584.2 mm Wide (23 inch) TFT (Thin Film Transistor)
Screen Type
LCD Panel
Video Signal
Visible diagonal size: 584.2 mm
Pixel Pitch
0.265 mm (H) x 0.265 mm (V)
Max. Resolution
1920 x 1080 @ 60 Hz
Recommended Resolution
1920 x 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 83 kHz
Vertical Frequency
56 Hz to 75 Hz
Synchronization Type
Separate Sync, Digital
TV, D-Sub Analog, PC Audio In, component, HDMI*2, CVBS
Input Connector
Rated Voltage
Power
Power Consumption
AC/DC Adapter
Tilt
LCD (Liquid Crystal Display) Panel
19 V
2.4 A
On Mode : 40 W( typ.)
Off Mode ≤ 1 W
Manufacturer: LITE-ON, Model PA-1650-68
Tilt Range
-5° to 10°
M2380D
547 mm x 415.7 mm x 193.8 mm
Dimensions (Width x Height x Depth)
3.8 Kg
Weight
M2380DF
547 mm x 427.9 mm x 193.9 mm
4.4 kg
Environmental
conditions
Operating Temperature
10 °C to 35 °C
Operating Humidity
20 % to 80 %
Storage Temperature
-10 °C to 60 °C
Storage Humidity
APPENDIX
126
5 % to 90 %
■■ The specifications shown above may be changed without prior notice for quality improvement.
IR CODES
•This feature is not available for all models.
Code (Hexa)
95
Function
Note
Energy Saving
R/C BUTTON
08
POWER
R/C BUTTON (POWER ON/OFF)
50
TV / PC
R/C BUTTON
0B
INPUT
R/C BUTTON
79
RATIO
R/C BUTTON
F0
TV/RAD
R/C BUTTON
45
Q.MENU
R/C BUTTON
43
MENU
R/C BUTTON
AB
GUIDE
R/C BUTTON
40
Up (ꕭ)
R/C BUTTON
41
Down (ꕮ)
R/C BUTTON
07
Left (<)
R/C BUTTON
06
Right (>)
R/C BUTTON
44
OK(ꔋ)
R/C BUTTON
28
BACK
R/C BUTTON
5B
EXIT
R/C BUTTON
AA
꘍
R/C BUTTON
02
03
(+)
R/C BUTTON
(-)
FAV ( MARK )
R/C BUTTON
1E
R/C BUTTON
09
MUTE
R/C BUTTON
00
P (ꕭ)
R/C BUTTON
01
P (ꕮ)
R/C BUTTON
Number Key 0 to 9
R/C BUTTON
53
LIST
R/C BUTTON
10 to 19
1A
Q.VIEW
R/C BUTTON
72
RED Key
R/C BUTTON
71
GREEN Key
R/C BUTTON
63
YELLOW Key
R/C BUTTON
BLUE Key
R/C BUTTON
TEXT
R/C BUTTON
21
T.OPT (T.Option)
R/C BUTTON
39
SUBTITLE
R/C BUTTON
99
Auto Config.
R/C BUTTON
B1
r
R/C BUTTON
B0
s
ll
R/C BUTTON
BA
8F
◄◄
R/C BUTTON
8E
►►
R/C BUTTON
R/C BUTTON
APPENDIX
61
20
127
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product’s functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied with the product.
2
HDMI DVI IN
OPTICAL
AUDIO
DIGITAL
IN
AUDIO OUT (RGB/DVI)
1
YP
AV IN2
USB IN
VIDEO
B
VIDEO
PR
(MONO) L -
H/P
AUDIO - R
ANTENNA /
CABLE IN
LR
AUDIO
COMPONENT IN
Type of Connector; D-Sub 9-Pin Male
No.
1
2
3
4
5
6
7
8
9
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
RS-232C Configurations
3-Wire Configurations(Not standard)
7-Wire Configurations (Standard RS-232C cable)
APPENDIX
RXD TXD
GND
DTR
DSR
RTS
CTS
128
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. ► p.134
OPTION
Move
OPTION
OK
: English
Audio Language
: English
Subtitle Language : English
Subtitle Language : English
Disabled Assistance
Country ➩
: ­- -
Input Label
Country 2
3
: ­- -
Input Label
ꔋ
:: 11
Set
Set ID
ID
:: 11
Power Indicator
:On
Power Indicator
:On
:Off
Demo Mode
v
MENU
OK
Disabled Assistance
Set
Set ID
ID
Demo Mode
1
Move
Audio Language
:Off
ꔋ
◄
1
►
Close
v
Select OPTION.
Select Set ID.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1 to 99.
APPENDIX
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
129
APPENDIX
Communication Parameters
■■ Baud rate: 9600 bps (UART)
■■ Data length: 8 bits
■■ Parity : None
■■ Stop bit: 1 bit
■■ Communication code: ASCII code
■■ Use a crossed (reverse) cable.
Transmission / Receiving Protocol
Command Reference List
COMMAND COMMAND
1
2
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
01. Power
k
a
00 to 01
02. Aspect Ratio
k
c
Refer to p. 131
03. Screen Mute
k
d
00 to 01
04. Volume Mute
k
e
00 to 01
05. Volume Control
k
f
00 to 64
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10. Sharpness
k
k
00 to 64
11. OSD Select
k
l
00 to 01
12. Remote control lock
mode
k
m
00 to 01
13. Treble
k
r
00 to 64
14. Bass
k
s
00 to 64
* [Command 1] : First command to control the Monitor set. (j, k, m or x)
* [Command 2] : Second command to control the Monitor set.
: You can adjust the set ID to choose
* [Set ID]
desired monitor ID number in option
menu. Adjustment range is 1 to 99.
When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1 to 99)
on menu and as Hexa decimal (0x0 to
0x63) on transmission/receiving protocol.
[DATA]
:
To
transmit command data.
*
Transmit ‘FF’ data to read status of
command.
: Carriage Return
* [Cr] ASCII code ‘0x0D’
: ASCII code ‘space (0x20)’
* [ ]
15. Balance
k
t
00 to 64
OK Acknowledgement
16. Colour Temperature
x
u
00 to 64
17. Energy Saving
j
q
00 to 05
18. Auto Configuration
APPENDIX
130
DATA
(Hexadecimal)
j
u
01
19. Tune Command
m
a
Refer to p. 133
20. Programme Add/
Skip
m
b
00 to 01
21. Key
m
c
Key Code
22. Control Back Light
m
g
00 to 64
23. Input select (Main)
x
b
Refer to p. 134
* When setting the 17 to 24, a menu does not appear
on screen.
* Note : During USB operations such as Dvix or EMF,
all commands except Power(ka) and Key(mc) are not
executed and treated as NG.
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates
present status data. If the data is data write mode,
it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based
on this format when receiving abnormal data from
non-viable functions or communication errors.
Data00: Illegal Code
01. Power (Command: k a)
►► To control Power On/Off of the set.
Transmission
03. Screen Mute (Command: k d)
[k][a][ ][Set ID][ ][Data][Cr]
[k][d][ ][Set ID][ ][Data][Cr]
Data00 :Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Acknowledgement
Data00 : Power Off
Ack
01 : Power On
[a][ ][Set ID][ ][OK/NG][Data][x]
►► To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’ data
based on this format, Acknowledgement data
feed back presents status about each function.
* OK Ack., Error Ack. and other message may display on the screen when Monitor set is power
On.
►► To select screen mute on/off.
Transmission
[d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, Monitor set will display On Screen Display(OSD). But, in case of
Screen mute on, Monitor set will not display OSD.
04. Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
02. Aspect Ratio (Command: k c) (Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data01 : Normal screen (4:3)
02 : Wide screen (16:9)
04 : Zoom
06 : Original
07 : 14:9
09 : Just Scan
10 to 1F : Cinema Zoom 1 to 16
Data00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the VOLUME buttons on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 134.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page134.
Acknowledgement
APPENDIX
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50
Hz / 60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60
Hz), Component( 720p, 1080i, 1080p 50 Hz /
60 Hz) mode, Just Scan is available.
Full
Wide is supported only for Analogue, AV.
*
[g][ ][Set ID][ ][OK/NG][Data][x]
131
APPENDIX
07. Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when controlling remotely.
Transmission
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 134.
Acknowledgement
[k][l][ ][Set ID][ ][Data][Cr]
[h][ ][Set ID][ ][OK/NG][Data][x]
[l][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
►► To adjust the screen colour. (Except PC mode)
You can also adjust colour in the PICTURE menu.
Transmission
12. Remote control lock mode (Command: k m)
[k][i][ ][Set ID][ ][Data][Cr]
[k][m][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 134.
Acknowledgement
Data00 : Lock off
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
►► To adjust the screen tint. (Except PC mode)
You can also adjust tint in the PICTURE menu.
Data 00 : OSD off
Acknowledgement
01 : OSD on
►► To lock the front panel controls on the monitor and
remote control.
Transmission
01 : Lock on
[m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is on/off, external control lock is
released.
* Local Power Key will work properly.
13. Treble (Command: k r)
Transmission
►► To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
[k][r][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
* Refer to ‘Real data mapping 1’. See page 134.
Acknowledgement
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 134.
[j][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
10. Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
14. Bass (Command: k s)
[k][k][ ][Set ID][ ][Data][Cr]
[k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 134.
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
►► To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 134.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
132
15. Balance (Command: k t)
18. Auto Configure(Command: j u)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
►► To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
[j][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 134.
Acknowledgement
Data01: To set
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
19.Tune Command (Command: m a)
►► To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
Transmission
►► Select channel to following physical number.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data00 :High channel data
Data01 :Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Data02 :0x00 : Analogue Main
0x10 : DTV Main
0x20 : Radio
Data Min : 00 to Max : 64
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Energy Saving (Command: j q)
►►To reduce the power consumption of the Monitor
set. You can also adjust Energy Saving in OPTION
menu.
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
Acknowledgement
Transmission
[a][ ][Set ID][ ][OK/NG][Data][x]
[j][q][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 7DH
Power
Saving
Function
Level
7 6 5 4
3 2
1
Description
0
0 0 0 0
Low
Power
0 0 0 0
0 0 0 0
Low
Power
0 0 0
1
Minimum
0 0 0 0
Low
Power
0 0
1
0
Medium
0 0 0 0
Low
Power
0 0
1
1
Maximum
0 0 0 0
Low
Power
0
0
1
Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
1
Off
133
APPENDIX
20. Programme Add/Skip(Command: m b)
21. Key(Command: m c)
►► To set skip status for the current Programme.
Transmission
►► To send IR remote key code.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code - Refer to page 126.
Acknowledgement
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
[c][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping 1
00 : Step 0
A:
Step 10 (Set ID 10)
F:
10 :
Step 15 (Set ID 15)
Step 16 (Set ID 16)
64 : Step 100
Tint
Step 0 : R50
Step 49 : R1
Step 50 : 0
Step 51 : G1
22. Control Back Light (Command: m g)
Step 100 : G50
[m][g][ ][Set ID][ ][Data][Cr]
►► To Control the back light.
Transmission
Data : data Min: 00 to Max: 64
6E :
Step 110
73 :
74 :
Step 115
Step 116
CF : Step 199
FE :
FF :
Step 254
Step 255
Balance
Step 0 : L50
Step 49 : L1
Step 50 : 0
Step 51 : R1
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
Step 100 : R50
Colour Temperature
Step 0 : W50
Step 49 : W1
Step 50 : 0
Step 51 : C1
Step 100 : C50
23. Input select (Command: x b)
(Main Picture Input)
►► To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data Structure
Data
00: DTV
40: Component
10: Analogue
60: RGB
20: AV
90: HDMI
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
134
LICENSES
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc.
This is an official DivX Certified device that plays DivX video. Visit www.divx.
com for more information and software tools to convert your files into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device
setup menu. Go to vod.divx.com with this code to complete the registration
process and learn more about DivX VOD.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc.
and are used under license.”
“Pat. 7,295,673; 7,460,668; 7,515,710; 7,519,274”
LICENSES
135
Make sure to read the Safety Precautions before
using the product.
Keep the Owner’s Manual (CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Download PDF