LG | M4200N-B10 | LG M4200N-B10 Owner’s Manual

Table of Contents
Safety
Installation
Precautions
and
A4
the Remote Control
A5
Name and Function of the Parts
A6
When
A7
Using
Connection
Connecting
Connecting
Watching
Selecting
Input
How to
Selection
and
A1
Accessories
Tracking
Miscellaneous
to your
product
your Product
RGB
and
A9
Adjusting
adjust
A7
Outputs
the OSD
the Screen
(On
Screen
Display)
A10
Screen
A13
Adjusting
Screen Coluor
A14
Selecting
the
A15
Adjusting
Screen CLOCK/PHASE and Position
Options
A19
Troubleshooting
A20
Specifications
A23
WARNING
This is
which
a
class A
case
the
product.
user
In
may be
a
domestic environment this
required
to take
adequate
i
product
may
measures.
cause
radio interference in
ENGLISH
Safety
Precautions
safety precautions carefully before using
Please read these
Warning
If you ignore the
dent or death.
Caution
If you
be
warning message, you may
seriously injured
or
the
there is
a
possibility of acci-
ignore the caution message, you may be slightly injured or the product may
Precautions in
installing
product.
be
damaged.
the Product
Warning
Keep away from
-
Electrical
heat
Keep the packing
-
sources
like electrical heaters.
shock, fire, malfunction
deformation may
or
anti-moisture material
occur.
vinyl packing out of the reach of children.
by mistake, force the patient to vomit and visit the
hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
or
Anti-moisture material is harmful if swallowed. If swallowed
nearest
Do not
-
put heavy objects on the product or sit upon it.
product collapses or is dropped, you may be injured.
If the
Children must pay
particular attention.
Do not leave the power or signal cable unattended on the pathway.
The passerby can falter, which can cause electrical shock, fire, product breakdown
-
Install the
-
Dust
or
product
moisture
in
neat and
a
can cause
If you can smell smoke
service center.
-
If you continue to
If you
-
use
or
injury.
dry place.
electrical
shock, fire
other odors
without
or
taking
or
hear
or
a
product damage.
strange
sound
unplug the power cord
proper measures, electrical shock
or
fire
and contact the
can occur.
dropped the product or the case is broken, turn off the product and unplug the power cord.
use without taking proper measures, electrical shock or fire can occur. Contact the service
If you continue to
cen-
ter.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable
objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and
-
contact the service center.
Caution
Make
product ventilation hole is not blocked. Install the product in a suitably wide place (more
wall)
install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
sure
the
than 10cm from the
-
If you
Do not block the ventilation hole of the
-
The
product can
be deformed
or
fire
can
product by a tablecloth or curtain.
break out due to overheating inside the product.
Install the
-
If the
product on a flat and stable place that has no risk of dropping
product is dropped, you may be injured or the product may be broken.
Install the
product where
no
EMI
occurs.
Keep the product away from direct sunlight.
The product can be damaged.
-
A1
the
product.
Electrical Power Related Precautions
ENGLISH
Warning
Make
-
sure
to connect the power cable to the
You may be electrocuted
or
grounded
current.
injured.
Use the rated
-
The
voltage only.
product can be damaged,
During
-
a
thunder
or
or
you may be electrocuted.
lightning storm, unplug
You may be electrocuted
or a
fire
can
Do not connect several extension
Use
-
the power cable
or
signal
cable.
break out.
cords, electrical appliances
power bar with a grounding terminal
A fire can break out due to overheating.
a
or
electrical heaters to
designed for exclusive
use
Do not touch the power plug with wet hands. Additionally, if the cord
the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
with the
pin
is wet
a single
computer.
or
outlet.
covered with
dust, dry
-
If you don't intend to
-
Covering
dust
use
the
can cause a
product for a long time, unplug the power cable from the product.
or insulation deterioration can cause electric leakage, electric shock or fire.
fire,
Fix the power cable completely.
If the power cable is not fixed completely,
-
a
fire
can
break out.
Hold the plug when pulling out the power cable. Do not bend the power cord with
heavy objects on the power cord.
The power line can be damaged, which may cause electric shock or fire.
excessive force
or
put
-
Do not insert
(like a metal chopstick) into one end of the power cable while the other end is
input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
a
conductor
connected to the
-
You may be electrocuted.
The power supply cord is used
accessible after installation.
as
the main disconnection device. Ensure that the socket-outlet is
Caution
Do not
-
unplug
the power cord while the
can damage the product.
product is
in
use.
Electrical shock
Precautions in
Moving
the Product
Warning
Make
-
Make
-
sure
to turn off the
You may be electrocuted
sure
to
remove
product.
or the product can
be
damaged.
all cables before
You may be electrocuted
or
the
moving the product.
product can be damaged.
A2
easily
Precautions
Safety
Caution
Do not shock the
-
Do not
dispose the product-packing
Make the
-
product when moving it.
or the product can
You may be electrocuted
be
damaged.
box. Use it when you
move.
face forward and hold it with both hands to
panel
drop the product, the damaged product can
repair.
If you
Precautions in
Using
cause
move.
electric shock or fire. Contact with the service center for
the Product
Warning
Do not
-
-
Fire
disassemble, repair or modify the product
or
electric shock accident
Contact the service center for
at your
discretion.
own
can occur.
check, calibration
Do not spray water on the product
electric shock accident can occur.
or
or
scrub with
repair.
an
inflammable substance
(thinner or benzene).
Fire
or
Keep the product away from water.
-
Fire
or
electric shock accident
can occur.
Caution
Do not
-
put
There is
a
or
store inflammable substances
danger of explosion or fire
near
the
due to careless
product.
handling of the
inflammable substances.
When
cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
The water can sink into the product, which can cause electric shock or serious malfunction.
-
Take
a
rest from time to time to
Keep the product clean
at all times.
Take
a
comfortable and natural
Take
a
regular
Do not press
scratch on it.
protect your vision.
break when
position
working with
strongly upon
the
panel
when
a
with
working with
a
product to
relax the muscles.
product for a long time.
a
hand
or
sharp object such
as
nail, pencil
or
pen,
or
make
Keep proper distance from the product.
Your vision may be impaired if you look at the product too closely.
-
Set the
-
appropriate
Your vision
can
Use authorized
-
Product
On
can
be
resolution and clock
by referring to the
User's Guide.
impaired.
detergent only when cleaning the product. (Do
not
use
benzene, thinner or alcohol.)
be deformed.
Disposal
The fluorescent
lamp used in this product contains a small amount of mercury.
dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your
Do not
A3
local
authority.
a
Accessories
Please check the accessories in the
*
The
product
and the accessories
product package.
be different from the
can
figures
shown here.
+
+
-
Remote Control/
RS-232C Cable
Power Cord
15-pin
Batteries
D-Sub
Signal
Cable
*
Please refer to the manual
included in the CD for driver
User's Guide/
installation related instruction
Cards/Driver CD
for main board and audio driver.
Optional
Wall-mount Rack
Please refer to the enclosed "Installation Guide" when
Inserting
1. Take out the
batteries into remote Control
battery cap.
2. Insert batteries with correct
3. Close the
?
?
You
installing the wall-mount rack.
polarity (+/-).
battery cap.
can use a
remote Control 7 meter distance and 30
ing unit scope.
Dispose of used
batteries in the
recycle
bin to
A4
degree (left/right)
within the receiv-
prevent environmental pollution.
ENGLISH
Using the
Remote Control
Name of the Remote Control Buttons
Power On/Off Button
POWER
Input
MENU
+
SOURCE
Menu Button
Digital signal
Auto Button
PC: Automatic
adjust-
Bring up and down
Brightness level.
ment function
(Operational for the
analog signal only)
BRIGHT Button
adjust the brightness
of the
AUTO
OK
screen.
LOCK Button
CONTRAST Button
To
adjust the contrast of the screen.
CONTRAST
BRIGHT
LOCK
(See A18)
ARC
To select the
TILE Button
It is used to
and
enlarge the screen
also used with several products to view
Contrast and
OK Button
-
To
Analogue signal
+
-
?
Select Button
If you press the button once, the
source will change.
ARC Button
TILE
0
the
image
size of
screen.
screen.
12
3
Number Select Button
456
789
A5
input
Name and Function of the Parts
Rear View
Power Connector
ENGLISH
:
Connect the power cord
RS-232C Serial Ports
Analogue Signal Input/Output
Mouse Port
Keyboard
Port
VGA Port
LAN Port
USB Port
Serial Port
Note
?
It's possible to output AUDIO OUT. But it's
product dosen't include this specification.
A6
not
ensure
the
guarantee
because this
When
Connecting
1.
This
Connecting to your Product
your Product
product
contains
Rear side of the
DVI-Signal settings.
product.
Connect the power cord.
When
using
First of
all,
Then,
with the D-Sub
see
if the
connect the
signal.
computer, product and the peripherals
signal input
Rear side of the
cable.
product.
Connect the power cord.
A7
are
turned off.
2.
Turn
on
by pressing
power
the power button
on
the
ENGLISH
product.
Power button
If you press the Power button the
the screen will turn ON/OFF.
3.
Select
on
the remote control to select the
Or, press the SOURCE button
(Digital signal)
If the PC is installed
selecting
4.
and the PC connected to
input signal.
an
Press the SOURCE button
DVI
screen
the DVI
Install with the
?
internally you
can
only display the
screen
connected to the PC when
source.
graphic driver.
graphic
driver installation
How to connect to two
Connect the
signal
computers.
(DVI and D-Sub)
cables
Press the SOURCE button in
?
input signal.
product.
RGB(Analogue signal)
Make reference to the
Note
at the front side of the
a
guide
book.
to each
computer.
computer to
remote control to select the
Directly connect to a grounded power outlet on the wall
wire.
A8
or a
use.
power bar with
a
ground
When
Connecting to your Product
Watching
RGB
Use this function when
?
To
use
Outputs
displaying
ANALOG RGB
inputs
of
a
PC to the other
product.
different
Connect
one
connector of
products connected to each other
signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT
product 1 and connect the other end to the RGB INPUT connector of other
end of the
products.
-
Change
SOURCE to
Analogue signal
D-Sub
desiring
Product 3
Product 2
15-pin
when
Signal
to
see
input signal
Product 4
Cable
D-SUB(OUT)
D-SUB(OUT)
D-SUB(OUT)
D-SUB(IN)
D-SUB(IN)
D-SUB(IN)
Product 1
D-SUB(OUT)
VGA
D-SUB(IN)
15-pin
D-Sub
Signal
Cable
A9
of the
Analogue signal.
Selecting and Adjusting the Screen
Name of the Buttons in the Screen
Adjustment
Unit
ENGLISH
Power Button
?
Press this button to turn
turn it off.
(If you
nected to the
?
Power Indicator
?
MENU Button
on
the power. Press this button
press the Power button the
screen
will turn
screen
again
and the PC
to
con-
ON/OFF.)
This Indicator
lights up green when the display operates normally(on
mode). If the display is in sleep (Energy Saving) mode, this indicator
color changes to amber. (When turning the power OFF the power of the
screen and the PC will take several seconds to turn off completely. )
Use this button to show/hide the OSD
(On
Screen
Display)
menu
screen.
?
OSD Select /
Adjust
Use this button to select
an
icon
or
adjust the setting
in the OSD
Button
?
Use this button to
A10
directly
control
brightsignal
(Digital signal, Analog signal ).
ness
and contrast of the PC
screen.
Selecting and Adjusting the Screen
Name of the Buttons in the Screen
AUTO/SELECT Button
Adjustment
Unit
[For Analog signal]
If the resolution is 1360X768
Auto in progress
If the resolution is not 1360X768
Auto in progress
For
optimal display change
Change
resolution to 1360 X 768
[For Digital signal]
?
SOURCE Button
?
The current
Select the
DVI
signal
and mode information will be
input signal
(Digital signal)
RGB(Analogue signal)
Digital signal and Analogue signal can't
when
displayed.
be
outputted
at the
same
transferring the source connect the connector and then turn
power.
IR Receiver
?
The unit that receives the
A11
signal
from the remote control.
time
on
so
the
OSD Menu
Icon
Function
Adjusts
screen
Description
brightness,
contrast and color that you
prefer.
PICTURE
Adjusts
the
screen
status
Adjusts
the
screen
video.
according
to the circumstances.
SPECIAL
SCREEN
Note
OSD(On
Screen
Display)
The OSD function enables you to
cal presentation.
adjust the
A12
screen
status
conveniently
since it
provides graphi-
ENGLISH
How to adjust the OSD(On Screen
How to
Display)screen
adjust the OSD (On Screen Display)
+
screen
+
MENU
+
-
+
-
OK
OK
-
Pops
up the
-
Move where you
want to adjust
menu screen
Select
menu
Select
Move where you
want to adjust
a
icon
menu
a
icon
+
MENU
+
-
-
Adjust the
Exit from the
the OSD
menu screen.
1
Press the MENU
2
To
3
When the icon you want becomes
highlighted,
4
Use the
adjust the
5
Exit the OSD
access a
How to
the
by pressing
adjust
computer
section to set
of the OSD appears.
Buttons.
press the OK Button.
item to the desired level.
the MENU Button.
the
an
display when connecting the prodchanging the mode. Refer to the followoptimal product screen.
screen
in the PC
(AUTO
analog signal. Then,
button in
an
optimal
a
remote
screen
adjustment
is not
tion, clock and
satisfactory, you need
phase in the OSD menu.
to
Auto in progress
If the resolution is not 1360X768
status
will be selected that fits into the current mode.
If
If the resolution is 1360X768
or
Press the AUTO/SELECT button
Control)
menu
adjust
screen.
adjust the screen automatically
uct to
ing
use
Buttons to
You need to
a new
Button, then the main
control,
Use the remote control to
?
status
Auto in progress
For
adjust
screen
A13
posi-
optimal display change
Change
resolution to 1360 X 768
Adjusting Screen Colour
ACC
?
6500K/9300K/3600K
Selecting a factory setting color set.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
3600K: Slightly yellowish white.
?
User
:
Select this option to use
the user-defined settings.
Contrast
To
adjust the contrast of the screen.
Brightness
To adjust the brightness of the screen.
Red / Green / Blue
Set your
A14
own
color levels.
ENGLISH
Selecting and Adjsting the screen
the
Selecting
options
Set ID
Access Code
Input
If you press the button once, the following
Input Signal Window will appear. Select
the
signal type
you want
using
the
button.
Set ID
Access Code
Child Lock
Use the
buttons to select On
or
with the remote control. This feature
In order to lock the OSD
In order to unlock
*
on
can
be set up
so
that it
can
only
be used
prevent unauthorized viewing.
can
set the Child Lock tab to the 'On'
position.
the remote control and set Child Lock to the 'Off'
position.
screen
adjustment,
it, do the following
Push the MENU button
Off. The Set
:
Language
To choose the
Power
Use this function to set the power indicator on the front side of the product to On
If you set Off, it will go off. If you set On at any time, the power indicator will
Indicator
automatically
Transparency
To
adjust
the
language
be turned
in which the control
names are
on.
transparency of the OSD
menu screen.
A15
displayed.
or
Off.
Selecting
?
To
-
use
You
the
options
ENGLISH
this function
can
connect the
Tile mode
product with
several other
products
and
use
It is used to
the Tile mode function.
the
enlarge
products to view screen,
screen
and also used with several
Set ID
Access Code
Tile mode and choose Tile
of the current
*
product to
alignment and
set the ID
set location.
Only after pressing the OK button the
adjustments made to the settings will be
saved.
Set ID
Access Code
?
Position
The location of the
at the Position
adjusting
*
Set ID
screen can
menu
and
can
be
adjusted
by
be set
the size of the bezel.
If you exit the menu after making the
changes to the settings the adjustments
will be saved.
Access Code
?HSize
Adjust the horizontal size of the
taking
screen
into account the size of the bezel.
?VSize
Adjust the vertical size of the screen
taking into account the size of the bezel.
Set ID
?
Access Code
Tile recall
Function to initialize and release Tile.
All Tile
setting
are
Tile recall and the
released when
screen
selecting.
returns to Full
screen.
?ID
Select the location of the Tile
A16
by setting
an
ID.
Selecting and Adjsting the screen
Selecting
?
the
options
Tile mode
-Tilemode:rowxcolumn(r=1,2,3,4 c=1,2,3,4)
-
-
-
4
x
4 available.
Configuration
Tile mode
of
an
integration
(product
1
screen
4) : r(2)
~
x
is also available
as
well
as
configuration
c(2)
row
ID1
ID2
column
ID3
-
Tile mode
ID4
(product
1
9) : r(3) x c(3)
~
row
ID1
ID2
ID3
ID4
ID5
ID6
column
ID7
ID8
ID9
A17
of
one
by
one
Display.
Selecting
-
Tile mode
(product
1
the
options
ENGLISH
2) : r(2) x c(1)
~
row
ID1
ID2
column
Set ID
You
can assign a unique Set ID NO (name
assignment) to each product when several products are connected for display. Specify the number (0~255)using the
button and exit. Use
the assigned Set ID to individually control each
product using the Product Control Program.
Set ID
Access Code
Access code
Code values
through
be
can
assigned
for all the
products
the communication with RS-232 to set
and reset LOCK.
[To
Current Code
Set ID
set Access
Code]
Use the number button and the
0
New Code
button to
input New Code (ex. 000~255,except for 251).
Always input three digits. (ex. 001, 010, 100...).
Save the code value by pressing the OK button.
Access Code
[To
set Lock
]
Press the Lock button
the select
Access Code
Access Code
125
125
Input
screen
on
the remote control and
will show.
the Access Code
as
shown
previously
and
press the OK button and the OK message will
show which indicates the Lock function.
OK
Press the Lock button
on
the remote control to
undo the Lock function.
Note
?
If you input the wrong Access Code and press the OK button
will show.
message
saying
"NG"
If the NG message shows the Lock will be set so press the Lock button to undo the
Lock and press the Lock button again to set it.
If you set the Access Code after you have set the Lock function the remote control will
->
?
a
not work.
->
Press Lock button to undo the Lock function.
A18
Selecting and Adjsting the screen
Adjusting Screen CLOCK/PHASE
and Position
Auto-configure
Reset
To select the
ARC
(1:1
menu
image
size of the
and the Zoom
screen.
menu are
not
supported
over
1360 X 768
resolution)
Auto-configure
Reset
Auto
config.
This button is for the automatic
This function is suitable for
adjustment of the screen position,
analoge singnal input only.
clock and
phase.
Clock
To minimize any vertical bars or stripes visible on the screen background. The horizontal
screen size will also change. This function is suitable for analoge singnal input only.
Phase
To
adjust
and clear
the focus of the
sharpen
singnal input only.
or
the
display. This item allows you to remove any
image of characters. This function is suitable
To
Position
adjust position
of the
horizontal noise
for
analoge
screen.
This function is suitable for
analoge singnal
input only.
Auto-configure
Press the
button to
display
the submenu for
position.
Reset
Horizontal
Left
Vertical
Right
Up
Down
Reset
Use this function to reset the
product
will not be initialized.
A19
to the
factory
Moving
the
screen
position horizontally.
Moving
the
screen
position vertically.
default.
However, language selection
Troubleshooting
No
Is the
product
is
image
power cord connected?
?
displayed
See if the power cord is
properly connected to the
outlet.
Is the power indicator
light on?
Power is on, power indicator is green
screen appears extremely dark.
?
See if the power switch is turned
?
Adjust brightness
and contrast
on.
again.
but the
Is the power indicator amber?
?
If the
product is
mouse or
Does the 'Out of
range'
message
?
The
Does the 'Check
signal
cable' message
?
Maximum resolution
RGB
:
DVI
1280 X 1024 @60Hz
The
:
1600 X 1200 @60Hz
cable between PC and
signal
Press the 'SOURCE'
to check the
Did you check the SOURCE
Key?
?
the
horizontal
or
connected. Check the
?
move
(video card) is out of the
frequency range of the product. Adjust the frequency range by referring to the
Specifications in this manual.
*
appear?
saving mode,
key.
from the PC
signal
vertical
appear?
in power
press any
menu
product
is not
cable.
in the remote Control
input signal.
Press the 'SOURCE'
to check the
signal
menu
in the remote Control
input signal.
'Unknown Product' message appears when the product is connected.
Did you install the driver?
?
See if the
referring
Note
*
plug&play
function is
to the video card
user
supported by
manual.
Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
*
Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The
unit is kHz.
A20
ENGLISH
Is the
screen
position wrong?
?
D-Sub
analog signal
--
the remote control to
mal
status that fits into the current mode. If
screen
is not
adjustment
OSD
?
Press the "AUTO" button in
automatically select the opti-
satisfactory,
use
the Position
menu.
See if the video card resolution and
supported by the product.
If the
frequency are
frequency is out of
range, set to the recommended resolution in the
Control Panel
Display Setting menu.
--
Do thin lines appear on the
background screen?
?
D-Sub
analog signal
screen
mode. If
the
?
D-Sub
analog signal
screen
mode. If
screen
is
displayed abnormally.
is not
?
--
use
the
Press the "AUTO" button
automatically select an
is not
satisfactory,
use
the
menu.
The proper
input signal
signal port.
Connect the
with the
satisfactory,
status that fits into the current
adjustment
Phase OSD
The
automatically select an
menu.
in the remote control to
optimal
Press the "AUTO" button
status that fits into the current
adjustment
Clock OSD
or
--
in the remote control to
optimal
Horizontal noise appears
characters look blurred.
--
source
is not connected to the
signal
input signal.
cable that matches
The 'Controls locked' message
appears when pressing the Menu
?
appears when the
uct is turned off.
prod-
Screen has poor color resolution
locking function prevents unintentional
setting change due to careless usage. To unlock
the controls, simultaneously press the Menu button
and
button for several seconds. (You cannot set this
function using the remote control buttons. You can set
this function in the product only.)
OSD
button.
After-image
The control
?
If you
use a
fixed
may be damaged
function.
?
(16 colors).
image for a long time, the pixels
quickly. Use the screensaver
Set the number of colors to
Select Control Panel
Table
Screen color is unstable
or
mono-col-
?
ored.
Do black
more
than 24 bits
(true
color)
menu
--
Display
--
Settings
--
Color
in Windows.
Check the connection status of the
signal
cable.
Or, re-insert the PC video card.
spots appear
on
the screen?
?
Several
pixels (red, green, white or black color)
may appear on the screen, which can be attributable to the unique characteristics of the LCD
panel.
It is not
a
malfunction of the LCD.
Specifications
The
product specifications
LCD Panel
can
change
without
prior
notice for
product improvement.
42 inches
(106.73 cm) TFT (Thin Film Transistor)
(Liquid Crystal Display) Panel
Visible diagonal size: 106.73 cm
0.681 mm (Pixel Pitch)
LCD
Power
Rated
Power
Voltage
Consumption
AC 100-240V~50/60Hz 2.8A
On Mode
:
270 W
(With
(Only
(Only
(With
(Only
240 W
Mode
Sleep
Off Mode
: ≤
15W
: ≤
20W
≤ 13W
Video
Signal
Max. Resolution
RGB
:
DVI
1280 X 1024 @60Hz
:
1600 X1200 @60Hz
depending
Recommended Resolution
on
the OS
:
DVI
1360 X 768 @60Hz
Frequency
RGB
:
supported
type.
1360 X 768 @60Hz
supported depending
Horizontal
It may not be
--
video card
or
RGB
:
PC)
MNT)
MNT)
PC)
MNT)
30
-
on
--
the OS
It may not be
or
supported
video card
type.
83 kHz
DVI:30-72kHz
Vertical
56
Frequency
Synchronization Type
Input Connector
-
85 Hz
Separate/Composite/SOG (Sync On Green)/Digital
15-pin D-Sub type, RS-232C,
mouse,
keyboard, VGA,
LAN, USB, SERIAL
Dimensions
Width
x
1057.0
mm
&Weight
Height
x
Depth
(41.61 inches) x 653.0 mm (25.71 inches) x 119.1
mm
(4.69 inches)
Net
27.54
Environmental
Conditions
kg (60.71 lbs)
Operational Condition Temperature: 5˚C 35˚C Humidity: 10%
Storage Condition
Temperature: -20˚C 60˚C Humidity: 5%
~
,
NOTE
Information in this document is
subject to change
A23
80%
~
,
~
without notice.
95%
~
PC Mode
--
Preset Mode
Preset mode
1
VGA
640
x
2
VGA
720
x
3
VGA
640
4
Horizontal
Vertical
Frequency
(kHz)
Frequency
(Hz)
Horizontal
Vertical
Frequency Frequency
(Hz)
(kHz)
Preset mode
350
31.469
70
11
VESA 1024
x
768
60.123
75
400
31.468
70
12
VESA 1024
x
768
68.68
85
x
480
31.469
60
13
VESA 1280
x
720
44.772
60
VESA 640
x
480
37.500
75
14
VESA 1360
x
768
47.72
60
5
VESA 640
x
480
43.269
85
15
VESA 1280
x
1024
63.981
60
6
VESA 800
x
600
37.879
60
16
VESA 1280
x
1024
79.98
75
7
VESA 800
x
600
46.875
75
17
VESA 1600
x
1200
75.00
60
8
VESA 800
x
600
53.674
85
MAC
x
624
49.725
75
48.363
60
9
832
VESA 1024
10
x
768
RGB:Mode1~17
DVI:Mode1~ 15
Power Indicator
Mode
On Mode
Sleep
Mode
Off Mode
Product
Green
Amber
-
A24
ENGLISH
Specifications
VESA wall
mounting
Connected to another
object (stand type and wall-mounted type.)
product accepts VESA-compliant mounting interface pad.- (optional)
For further information, refer to the VESA Wall Mounting Instruction Guide.
This
a
Kensington Security Slot- optional
a locking cable that can be purchased separately at most computer stores
Connected to
A25
Download PDF