LG | NC2000-BAAA | LG NC1000-BAAA Owner’s Manual

ENGLISH
OWNER’S MANUAL
DIGITAL SIGNAGE MEDIA PLAYER
Please read this manual carefully before operating
your set and retain it for future reference.
DIGITAL SIGNAGE MEDIA PLAYER
NC1000
NC2000
www.lgsupersign.com
www.LGsolutions.com 1
2
CONTENTS
NC1000
Specifications................................................................................................................. 4
General Specifications................................................................................................................. 4
Multi I/O Port................................................................................................................................ 4
Operational Specifications........................................................................................................... 4
Included in the Box......................................................................................................... 5
Basic Components....................................................................................................................... 5
Optional Items.............................................................................................................................. 5
Connections................................................................................................................... 6
Back Panel................................................................................................................................... 6
Installation...................................................................................................................... 7
In/Out Cable Connection................................................................................................ 9
Connecting a Monitor with D-sub Cable....................................................................................... 9
Connecting a Monitor with an HDMI Cable................................................................................ 12
Connecting/Disconnecting HDMI in Windows............................................................................ 14
Connection to Multiple Monitors................................................................................................. 15
NC2000
Specifications............................................................................................................... 16
General Specifications............................................................................................................... 16
Multi I/O port............................................................................................................................... 16
Operational Specifications......................................................................................................... 16
Included in the Box....................................................................................................... 17
Basic Components..................................................................................................................... 17
Connections................................................................................................................. 18
Back Panel................................................................................................................................. 18
Installation.................................................................................................................... 19
3
NC1000
Specifications
Attention
NC1000
General Specifications
● Product specifications may change without prior notice to improve
performance.
Dimensions
250 mm (W) x 220 mm (H) x 45 mm (D) (only Set)
Weight
1.321 kg (only Set)
CPU
Intel ATOM Processor 330 1.6 GHz(Dual Core), FSB 533 MHz
Chip Set
Nvidia MCP7A-I ON
Main Memory
DDR3 1066 SODIMM type 1 GB, 2 GB
SSD
8G
16G
32G
1GB NC1000-BAAB NC1000-CAAB NC1000-DAAB
DDR
2GB NC1000-BABB NC1000-CABB NC1000-DABB
Secondary Storage Device SATA SSD 8 GB, 16 GB, 32 GB
O/S
Windows Embedded Standard
Multi I/O Port
Serial Port
One external RS-232 Serial port
USB Port
Hi-Speed USB 2.0 port 480 Mbps rate (x5)
LAN Port
Realtek RTL8103E 10/100 Mbps Ethernet controller
VGA / HDMI
Nvidia MCP7A-ION integrated Graphic chipset
4-in-1 Card
Secure Digital (SD) / MultiMedia Card (MMC/MMC4.0) /
Memory Stick (MS/MS-Pro) / xD Memory Card
PCI Express Card Slot
Supported
LINE OUT
Supported
SPDIF
(Digital Audio Out)
5.1 Channel Supported (depending on source signal)
Operational Specifications
Resolution
Maximum Resolution
1920 x 1080 @ 60 Hz
Recommended Resolution
1920 x 1080 @ 60 Hz
Power
Rated Voltage
AC 100-240 V~, 50 / 60 Hz, 1.2 A
Sound Output Wattage
RMS Audio Output 10 W + 10 W (R + L) : When connected to the monitor (model name:M4224C)
Operating Condition
Operating Conditions
4
Sync (H/V)
Video
LED
Normal Mode
On/On
Active
On
Deep Sleep Mode
(Set = Off)
Off/Off
Off
Off
5 ℃ to 35 ℃
Humidity
10 % to 80 %
-20 ℃ to 60 ℃
Humidity
5 % to 95 %
Operating Conditions
Temperature
Storage Conditions
Temperature
NC1000
Included in the Box
Basic Components
The NC1000 with the following components. Please check that these components have been included prior
to installation.
NC1000
NC1000
User Manual / Cards
Box Guide
Power Cable
RS-232C Cable
Rail x 2
Handle x 2
(for attachment of handle)
M3, L8 x 8
M3, L12 x 4
(for attachment of Box Guide on the monitor)
Attention
● These illustrations may differ from your product and are subject to change.
Optional Items
The following items are supported by the NC1000, but are not provided with the product.
Please purchase optional items as needed.
● HDMI cable, D-sub cable, LINE-OUT cable, fiber optic cable, LAN cable, mouse, keyboard.
5
NC1000
Connections
Back Panel
D
C
B
F
G
M
E
E
NC1000
A
H
Number
6
I
J
K
E
L
Connection
Description
A
Power Cable In
For the power cable.
B
Power Switch
Provides power to the NC1000.
C
RS-232C Out
For the RS-232C cable.
D
USB Wireless Modem In
For a USB-type wireless modem.
E
USB In
For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse.
F
HDMI Out
For an HDMI-compatible monitor.
G
LAN Connector
For a LAN cable.
H
4 IN 1 Multi-Card Slot
Accommodates memory cards for storing video or reading images.
Supported cards include Secure Digital (SD), MultiMedia (MMC/
MMC4.0), Memory Stick (MS/MS-Pro), and xD Memory Cards.
I
D-sub Out
For the monitor's RGB video in.
J
OPTICAL Out
For an optical cable for digital audio transfer.
K
NC1000 Power Button
Turns NC1000 on.
L
LINE-OUT Connector
For a LINE-OUT cable for analog audio transfer.
M
PCI MINI EXPRESS Card Slot
Provided for PCI Mini Express Cards.
NC1000
Installation
We recommend you to use the items provided with your NC1000 and follow our instructions for integrating
the product with your monitor in order to ensure the correct results.
Attention
The illustrations shown are to guide your integration and may differ from your product.
Place the handle into the slots on the side of the product.
2
Use screws to secure the handle.
3
Place the rail in the slots on the side of the product.
NC1000
1
Warning
● Be careful of sharp edges on the rail and the handle.
7
NC1000
As shown below, use screws to secure the Box Guide in the four slots at the back of the monitor.
5
Attach the Box Guide to the rail slots, and press it upward.
6
Use screws to secure the player and the Box Guide as shown below.
NC1000
4
8
NC1000
In/Out Cable Connection
In order to watch video on a monitor, you need to use a D-sub cable or an HDMI cable to connect the
NC1000 to a monitor.
Attention
NC1000
● D-sub, HDMI, LINE-OUT, OPTICAL, and LAN cables are not included with the NC1000. If the cables were
not provided with your monitor, you may need to purchase them separately.
● After all required cables are connected, configure SET ID to 1 for the first monitor connected to the
NC1000. The SET ID for one of the connected monitors should be configured to 1.
● To configure the SET ID, please refer to the owner’s manual for your monitor.
● Monitors used with NC1000 should support LG RS-232C protocols. The brightness, resolution, sound, and
other features of an LG RS-232C protocol-enabled monitor can be controlled by SuperSign Manager software.
Note
● A SET ID is a reference number for the monitor that can be set to the user's preference. The monitor
SET ID is used by the SuperSign Manager software to identify monitors.
Connecting a Monitor with D-sub Cable
Attention
● A D-sub cable connection does not include an audio signal. For audio, you need to connect a LINE-OUT
or OPTICAL cable.
Note
● D-sub cables are also known as RGB cables.
1
Connect the appropriate power cables to a monitor and NC1000 respectively.
9
NC1000
In/Out Cable Connection
Connect the D-sub port of NC1000 and RGB-IN port of the monitor with a D-sub cable.
3
Connect NC1000 (OUT) to the monitor (IN) with an RS-232C cable.
NC1000
2
10
NC1000
In/Out Cable Connection
Connect the NC1000 to the monitor with a LINE-OUT cable.
5
Connect a LAN cable to the NC1000.
NC1000
4
11
NC1000
In/Out Cable Connection
Connecting a Monitor with an HDMI Cable
HDMI connections allow digital video and audio signals to be transferred with one cable.
HDMI cable connections do not require an additional audio in cable.
NC1000
Note
12
● In and Out signals are not differentiated when using HDMI cables.
Attention
● The monitor to connect with NC1000 should have the HDMI in for the HDMI connection.
● To use the HDMI device, you need to activate the HDMI device in Microsoft Windows Embedded Standard, the
operating system of the NC1000. The procedures for activating and deactivating HDMI devices are described below.
1
Connect the appropriate power cables to a monitor and NC1000 respectively.
2
Connect NC1000 to a monitor with an HDMI cable.
NC1000
In/Out Cable Connection
Connect NC1000 (OUT) to the monitor (IN) with an RS-232C cable.
4
Connect a LAN cable to NC1000.
NC1000
3
13
NC1000
Connecting/Disconnecting HDMI in Windows
Connecting HDMI
NC1000
Move to the desktop of the monitor connected to the NC1000.
1
Click the
button in the lower left of the screen.
2
Select Start > Control Panel > Sounds and Audio Devices > Audio.
3
Select Play Sounds > NVIDIA High Definition Audio from the list and click OK.
Disconnecting HDMI
Move to the desktop of the monitor connected to the NC1000.
1
Click the
button in the lower left of the screen.
2
Select Start > Control Panel > Sounds and Audio Devices > Audio.
3
Select Play Sounds > Realtek HD Audio output from the list and click OK.
Attention
● If you do not reset after disconnecting the HDMI cable from the NC1000, the sound will not work.
● In order for the sound to work properly, stop playing the content and restart the NC1000.
14
NC1000
Connection to Multiple Monitors
Each NC1000 can accommodate up to 25 monitors for video playback. (SET ID: 1 to 25)
Connect the NC1000's D-sub OUT to the D-sub IN of the first monitor, which has SET ID = 1.
2
Connect other monitors with D-sub cables as shown below (IN/OUT separated).
3
Connect the NC1000's RS-232C OUT to the RS-232C IN of the first monitor, which has SET ID = 1.
4
Connect other monitors with RS-232C cables as shown below (IN/OUT separated).
NC1000
1
Attention
● You may want to purchase additional RS-232C cables to use several monitors together.
● You cannot use multiple monitors with the HDMI cable.
15
NC2000
Specifications
Attention
NC2000
General Specifications
● Product specifications may change without prior notice to improve
performance.
Dimensions
99.8 mm (W) x 183.3 mm (H) x 28.4 mm (D) (only Set)
Weight
0.215 kg (only Set)
CPU
Intel ATOM Processor 330 1.6 GHz(Dual Core), FSB 533 MHz
Chip Set
Nvidia MCP7A-I ON
Main Memory
DDR3 1066 SODIMM type 1 GB, 2 GB
Secondary Storage
Device
SATA SSD 8 GB, 16 GB, 32 GB
O/S
Windows Embedded Standard
SSD
8G
16G
32G
1GB NC2000-BAAB NC2000-CAAB NC2000-DAAB
DDR
2GB NC2000-BABB NC2000-CABB NC2000-DABB
Multi I/O port
Serial Port
N/A
USB Port
Hi-Speed USB 2.0 port 480 Mbps rate (x3)
LAN Port
Realtek RTL8103E 10/100 Mbps Ethernet controller
VGA / HDMI
Nvidia MCP7A-ION integrated Graphic chipset
4-in-1 Card
N/A
PCI Express Card Slot
Supported
LINE OUT
N/A
SPDIF
(Digital Audio Out)
N/A
Operational Specifications
Resolution
Maximum Resolution
1920 x 1080 @ 60 Hz
Recommended Resolution
1920 x 1080 @ 60 Hz
Power
Rated Voltage
DC 12 V / 3.5 A
Sound Output Wattage
N/A
Operating Condition
Operating Conditions
16
Sync (H/V)
Video
LED
Normal Mode
On/On
Active
On
Deep Sleep Mode
(Set = Off)
Off/Off
Off
Off
Operating Conditions
Temperature
5 ℃ to 35 ℃
Humidity
10 % to 80 %
Storage Conditions
Temperature
-20 ℃ to 60 ℃
Humidity
5 % to 95 %
NC2000
Included in the Box
Basic Components
The NC2000 consists of the following components. Please check that these components have been
included prior to installation.
NC2000
NC2000
User Manual / Cards
screw x 2
Attention
● These illustrations may differ from your product and are subject to change.
17
NC2000
Connections
Back Panel
B
D
C
C
NC2000
A
Number
18
Connection
Description
A
HDMI Out
For an HDMI-compatible monitor.
B
LAN Connector
For a LAN cable.
C
USB In
For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse.
D
PCI MINI EXPRESS Card Slot
Provided for PCI Mini Express Cards.
NC2000
Installation
We recommend you to use the items provided with your NC2000 and follow our instructions for integrating
the product with your monitor in order to ensure the correct results.
Attention
The illustrations shown are to guide your integration and may differ from your product.
Remove the screw and Metal cover.
2
Attach the Box Guide to the rail slots, and press it upward.
NC2000
1
Note
If card does not become fully inserted into the insertion direction.
Hit by hand carefully to make fully connected.
3
Use screws to secure the player and the Box Guide as shown below.
19
Make sure to read the Important Precautions
before using the product.
Keep the User’s Guide(CD) in an accessible
place for furture reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
WARNING - This is a class A product. In
a domestic environment this product may
cause radio interference in which case the
user may be required to take adequate
measures.
Temporary noise is normal when powering
ON or OFF this device.
20
Download PDF

advertising