LG | TSP500-A | LG TSP500-A Owner’s Manual

OWNER’S MANUAL
AD BOX FOR
TRANSPARENT DISPLAY
Please read this manual carefully before operating your set and retain it
for future reference.
AD BOX FOR TRANSPARENT DISPLAY MODELS
TSP500
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
LICENSES
32 CUSTOMIZING SETTINGS
32
Accessing the Main Menus
ASSEMBLING AND
PREPARING
33
- PICTURE Settings
36
- Power Sequence
4
Accessories
37
- AUDIO Settings
5
Parts and Buttons
38
- TIME Settings
6
Installing the Guide Brackets
7
REMOTE CONTROL
9
USING THE TSP500 SET
9
Connecting to a PC
9
- RGB Connection
10
- DVI Connection
10
- HDMI Connection
11
Adjusting the Screen
11
- Selecting an Image Mode
11
- Customizing Image Options
12
- Customizing PC Display Options
12
Adjusting the Sound
12
- Selecting an Sound Mode
13
- Customizing Sound Options
13
Using Additional Options
13
- Adjusting Aspect Ratio
15
- Using the Input List
4
16 ENTERTAINMENT
16
- Connecting to a Wired Network
17
- Network Status
18
- Connecting USB Storage Devices
19
- Browsing Files
21
- Viewing Movies
24
- Viewing Photos
27
- Listening to Music
29
- Viewing the Contents List
30
- DivX® VOD Guide
31
- Using PIP/PBP
39
- OPTION Settings
44
Picture ID
45
- NETWORK Settings
46 MAKING CONNECTIONS
47
External Device Connection
47
- DVI Connection
47
- HDMI Connection
48
- Component Connection
48
- AV(CVBS) Connection
49
Connecting to the LAN
49
Connecting to a USB
50 TROUBLESHOOTING
53 SPECIFICATIONS
55 IR CODES
56 CONTROLLING THE MULTIPLE
PRODUCT
56
Command Reference List
58
Transmission / Receiving Protocol
LICENSES
3
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
has passed rigorous testing to verify that it plays DivX video. Visit divx.com
for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents
: 7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
NOTE
The warranty will not cover any damages caused by using the product in an excessively dusty
yy
environment.
ENGLISH
LICENSES
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
OFF
Remote Control
and Batteries
RGB Cable
Guide Bracket
Screws
(For Guide Bracket)
Power Cord
LVDS Cable
for FHD
IR Receiver
LVDS Cable
for HD
Adaptor
CD (Owner's Manual,
SuperSign Elite-w,
SuperSign Elite-c
Program/SuperSign
Manual) / Cards
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
Risk of explosion if battery is replaced by an incorrect type.
yy
Dispose of used batteries according to the instructions.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
ASSEMBLING AND PREPARING
5
Parts and Buttons
OYGV#RXW
GF#LQ#+4<#Y####,
Power Indicator
LED On(Red) : Power is on.
yy
LED On(Amber) : DPM
yy
LED Off : Power is off.
yy
ENG
ENGLISH
2#L DXWR2VHW#
Buttons
PHQX LQSXW
IR Receiver
Connection Panel
Screen Marks
Description
Turns the power on or off.
/I
AUTO/SET
Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
Adjusts the volume level.
Adjusts the up and down.
MENU
Accesses the main menus, or saves your input and exits the menus.
INPUT
Changes the input source.
IR Receiver
This is where the unit receives signals from the remote control.
Power Indicator
Turns red when the TSP500 set is turned on; blinks amber when it is in Energy Saving
mode.
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
yy
6
ASSEMBLING AND PREPARING
Installing the Guide Brackets
ENGLISH
ENG
2#L
PHQX LQSXW
DXWR2VHW#
1 Install the guide brackets to the set using the screws supplied as accessories.
Back of the Product
224.2 mm
Guide Bracket
Screws (For Guide Bracket)
2 Fix the set with the guide brackets installed using the screws supplied as accessories.
Front of the Product
Guide Bracket
2#L
DXWR2VHW#
PHQX LQSXW
7
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the TSP500 set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control to the
yy
remote control sensor on the TSP500 set.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
1
4
7
.,!
GHI
PQRS
1/a/A
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
EXIT
ID
ON
ENERGY SAVING( )
Adjusts the brightness of
the screen to reduce energy
consumption.
(POWER)
Turns the TSP500 set on or off.
Monitor On / Off
Turn off the TSP500 and then
turn it back on.
POWER
ARC
Selects the Aspect Ratio
Mode.
MARK
Selects a specific file in the
USB mode.
INPUT
Selects the input mode.
INPUT
OFF
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
Number and Alphabet Buttons
Enters numerical or alphabetical
characters depending on the
setting.
DEF
MNO
WXYZ
CLEAR
Deletes the entered numerical
or alphabetical character.
MARK
ARC
Volume Up / Down
Adjusts the volume level.
PSM
Selects the Picture Status
Mode.
ENERGY
MONITOR
ON
1/a/A Button
Toggles between numerical
and alphabetical.
OFF
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
MUTE
Mutes all sounds.
OK
S.MENU
Brightness Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to
move to the next file list.
ENG
ENGLISH
REMOTE CONTROL
8
REMOTE CONTROL
ENGLISH
ENG
POWER
ENERGY
MONITOR
INPUT
OFF
ON
1
4
7
.,!
GHI
PQRS
1/a/A
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
POWER
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
BACK
TILE
S.MENU
OK
ENERGY
MONITOR
MENU
Accesses the main menus
or saves your input and exit
menus.
.,!
GHI
PQRS
1/a/A
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
ARC
Navigation Buttons
Scrolls through menus or
options.
PSM
P
BRIGHT A
NESS G
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
E
MUTE
MENU
OK
Selects menus or options and
confirms your input.
ID ON/OFF
When the number of Picture
ID is equal to Set ID you can
control the TSP500 which
you want in the multi TSP500
condition.
OFF
SAVING
MARK
BACK
Allows the user to move back
one step in user interaction
function.
EXIT
ID
ON
OFF
ON
INPUT
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
TILE
ID
ON
OFF
EXIT
EXIT
Clears all on-screen displays
and returns to the TSP500
set viewing from any menu.
TILE
Selects the TILE Mode.
USB Menu Control Buttons
Controls media playback.
9
USING THE TSP500 SET
Connecting to a PC
RGB Connection
The TSP500 does not include the monitor. You
can connect TSP500 to a transparent open frame
(model: 26TS30MF, 47TS30MF, 47TS50MF) to
view the picture on it.
Transmits the analog video signal from your PC
to TSP500. Connect the PC and TSP500 with
a 15 pin signal cable as shown the following
illustrations.
Select RGB input.
Your TSP500 set supports the Plug & Play* feature.
Side of the Product
* Plug & Play: A PC will have a built-in driver for
TSP500, no extra software is needed.
NOTE
It is recommended to use the TSP500 set
yy
with an HDMI connection for the best image
quality.
To comply with the specifications of the
yy
product, use a shielded interface cable
with ferrite core, such as the D-sub 15 pin
cable and DVI/HDMI cable provided with the
product.
If you turn the TSP500 set on when the
yy
TSP500 is cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
(not
included)
Macintosh
Adapter
(not included)
RGB OUT
AUDIO OUT
PC/MAC
PC
CAUTION
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the screen
yy
for a long period of time to prevent image
burn. Use a screensaver if possible.
NOTE
Use the standard Macintosh
yy
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter
yy
to connect to this TSP500. Call or visit their
web site for more information.
ENG
ENGLISH
USING THE TSP500 SET
10
USING THE TSP500 SET
ENGLISH
ENG
DVI Connection
HDMI Connection
Transmits a digtal video signal from your PC to
the TSP500 set. Connect the PC and the TSP500
set with a DVI cable as shown the following
illustrations.
Select DVI input.
Transmits digital video and audio signals from your
PC to the TSP500 set. Connect the PC and the
TSP500 set with an HDMI cable as shown in the
following illustrations.
Select HDMI input.
Side of the Product
Side of the Product
(not
included)
(not included)
(not included)
HDMI
PC
DVI OUT
AUDIO OUT
PC
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
If you want to use HDMI-PC mode, you must
yy
set the input label to PC mode.
When HDMI PC is used, a compatibility
yy
problem could occur.
USING THE TSP500 SET
Customizing Image Options
Selecting an Image Mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images in its optimized settings by
selecting one of the preset image modes.
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
Mode
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust the following options, and
then press OK.
Description
Vivid
Adjusts the video image for a retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for a normal
environment.
Cinema
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and
dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast
gaming screen such as PCs or games.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Option
Description
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright part of the
picture is saturated.
Brightness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark part of the picture is
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Customizes the advanced options.
Refer to the Advanced image options.
Control
Picture Reset
Restores the options to the default
setting.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
Adjusting the Screen
11
12
USING THE TSP500 SET
ENGLISH
ENG
Customizing PC Display Options
Adjusting the Sound
Customize options of each image mode for the
best image quality.
This function works in the following mode:
yy
RGB[PC] mode.
Selecting an Sound Mode
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
2 Press the Navigation buttons to scroll to
3 Press the Navigation buttons to scroll to
3 Press the Navigation buttons to scroll to Sound
4 Select and adjust following options, and then
4 Press the Navigation buttons to scroll to a
PICTURE and press OK.
Screen and press OK.
press OK.
Option
Description
Resolution
Selects a proper resolution. See
“Customizing PC display options”.
Auto
Config.
Sets to adjust the screen position, clock,
and phase automatically.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Play the sound in its optimized settings by
selecting one of the preset sound modes.
AUDIO and press OK.
Mode and press OK.
sound mode you want and press OK.
Mode
Description
Standard
Select when you want standard-quality
sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sports
Select when you watch sports events.
Game
Select when you play games.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
13
USING THE TSP500 SET
Using Additional Options
Customize options of each sound mode for the
best sound quality.
Adjusting Aspect Ratio
1 Press MENU to access the main menus.
Resize the image to view the image at its optimal
size by pressing ARC while you are watching the
display set.
2 Press the Navigation buttons to scroll to
AUDIO and press OK.
3 Press the Navigation buttons to scroll to Sound
Mode and press OK.
CAUTION
4 Press the Navigation buttons to scroll to a
sound mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Description
Infinite
LG's Infinity Sound option provides 5.1
Sound
channel stereo sound quality from two
If a fixed image displays on the screen for a
yy
long period of time, it could be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
yy
period of time, image burn may occur on the
letterboxed area of the screen.
speakers.
Treble
Increases the intensity of the high
frequency part of audio.
Bass
Increases the intensity of the low
NOTE
frequency part of audio.
Reset
Resets the sound mode to the default
setting.
You can also change the image size by
yy
accessing the main menus.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
MODE
AV
Component
RGB
DVI-D
16:9
o
o
PC
PC
DTV
PC
o
o
o
Just Scan
x
o
o
x
x
o
x
ARC
HDMI
1:1
x
x
o
o
x
o
4:3
o
o
o
o
o
o
Zoom
o
o
x
x
o
x
Cinema
Zoom
o
o
x
x
o
x
ENG
ENGLISH
Customizing Sound Options
14
USING THE TSP500 SET
ENGLISH
ENG
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image.
Note: If there is noise in original Picture, You can
see the noise at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only HDMI PC, DVI-D PC, RGB PC)
- Cinema Zoom : Choose Cinema Zoom when
you want to enlarge the picture in correct
proportion.
Note: When enlarging or reducing the picture,
the image may become distorted.
USING THE TSP500 SET
15
Using the Input List
1 Press INPUT to access the input source list.
2 Press the Navigation buttons to scroll to one of
the input sources and press OK.
Input source
Description
AV(CVBS)
Watch video from a VCR or other
external devices.
Component
Watch the content from a DVD or
other external devices, or through a
digital set-top box.
RGB
View a PC display on the screen.
DVI-D
Watch contents from a PC, DVD
of Digital set-top box other high
definition devices.
HDMI
Watch contents from a PC, DVD
of Digital set-top box other high
definition devices.
USB
Plays the multimedia file saved in
the USB.
ENG
ENGLISH
Selecting an Input Source
16
ENTERTAINMENT
ENGLISH
ENG
ENTERTAINMENT
Connecting to a Wired Network
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustration and set up the network settings.
The TSP500 only supports wired network connection. After making a physical connection, a small
number of networks may require the display network settings to be adjusted. For most networks,
the display will connect to automatically without
any adjustments.
For detail information, contact your internet provider or router manual.
To set up the network settings: (Even if your display has already connected automatically, running
setup again will not harm anything),
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Setting and press OK.
4 If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
LAN
Router
Router
@
LAN
Cable modem
Internet
Internet
WAN
-If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses will need to be input manually.
-IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
ETHERNET
Cable modem
CAUTION
yy
Do not connect a modular phone cable to the
LAN port.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
yy
Network setting menu will not be available until the display connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENTERTAINMENT
NOTE
Tips for Network Setting
yy
Use a standard LAN cable with this display.
Cat5 or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
network, quickly power off and/or disconnect
the power cable of the network router or cable
modem. Then power on and/or connect the
power cable again.
yy
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable terms of service. For details, contact your
ISP.
yy
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow
for such a connection, you will not be able to
connect the display.
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits sub-scription to one device, this display
may not be allowed to connect when a PC is
already connected.)
yy
The use of a “Router” may not be allowed or its
usage may be limited depending on the policies and restrictions of your ISP. For details,
contact your ISP directly.
Network Status
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after setting the network.
Return to the previous menu.
ENG
ENGLISH
yy
If you want to access the Internet directly on
your display, the internet connection should
always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yy
If you do not complete the network settings,
the network may not work properly.
17
18
ENTERTAINMENT
Connecting USB Storage Devices
ENGLISH
ENG
Connect USB storage devices such as a USB
flash memory or external hard drive to the display
to use multimedia features.
Connect a USB flash memory or USB memory
card reader to the Display as shown in the following illustration. The My media screen appears.
Tips for Using USB Storage Devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition program may not be recognized.
yy
A USB storage device which uses its own
driver may not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
or
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
yy
Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
CAUTION
yy
Do not turn the display off or remove a USB
storage device while the EMF(my media)
Menu is activated, as this could result in
loss of files or damage to the USB storage
device.
yy
Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
malfunction or fail to be played. Only use a
USB storage device which has normal music
files, image files or movie files.
yy
Please only use a USB storage device which
was formatted as a FAT32 file system, NTFS
file system provided with the Windows operating system. In case of a storage device
formatted as a different utility program which
is not supported by Windows, it may not be
recognized.
yy
Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable offered by the device maker.
yy
Some USB storage devices may not be supported or operated smoothly.
yy
File alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
yy
Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
19
ENTERTAINMENT
yy
If the USB HDD does not have an external
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
yy
If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
yy
If a USB memory device is connected to a
Browsing Files
Access the photo, music, or movie lists and browse
files.
1 Connect a USB storage device.
2 Press MENU to access the main menus.
3 Press the Navigation buttons to scroll to My
Media and press OK.
4 Press the Navigation buttons to choose
from Movie List, Photo List, Music List or
Contents List and press OK.
USB multi-card reader, its volume data may
not be detected.
yy
If the USB memory device does not work
properly, disconnect and reconnect it.
yy
How fast a USB memory device is detected
Movie List
Photo List
differs from device to device.
specific hard disk will automatically be
Page 1/1
Photo List
USB External
yy
The recommended capacity is 1 TB or less
001
for a USB external hard disk and 32 GB or
less for USB memory.
002
010
011
Contents List
2
1
yy
If the USB is connected in Standby Mode,
loaded when the display is turned on.
Music List
Drive1
Page 1/1
003
004
005
006
012
013
014
015
007
008
009
4
5
yy
Any device with more than the recommended
capacity may not work properly.
yy
If a USB external hard disk with a “Energy
Move
To Music List
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy
Maximum of 999 folders or files can be recognized under one folder.
yy
A USB 3.0 storage device may not work.
Change Numbers
View
Mark Mode
P
Page Change
Exit
3
No.
Description
1
Moves to upper level folder
2
Current page/Total pages
3
Corresponding buttons on the
remote control
4
Current page/ total pages of contents under
the folder focused on 1
5
Contents under the folder focused on 1
Button
Description
Green
Button
Press the green button to toggle between
Photo List -> Music List, Music List ->
Contents List, Contents List -> Movie List
or Movie List -> Photo List.
Yellow
Button
A method to view in 5 large thumbnail or
simple list.
Blue
Button
Convert to Mark Mode.
ENG
ENGLISH
power source, the USB device may not be
20
ENTERTAINMENT
Supported File Format
ENGLISH
ENG
Type
Movie
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Video format : DivX 3.11, DivX4, DivX5. DivX6
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Photo
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files)
JPEG
Music
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
yy You can play JPEG files only.
yy Non-supported files are displayed in the form
of predefined icon.
MP3
Bit rate 32 to 320
yy Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
yy Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
yy Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
Type
Content
(when
using
SuperSign
Manager)
Supported file format
File Extensions : *.cts/ *.cse
Movie
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX4, DivX5. DivX6
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03,Xvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
Audio format: MP2,MP3,Dolby Digital, LPCM,
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
File
Item
Profile
Extensions
Photo JPEG
JPG
supported
file format
BMP
Photo size
Music MP3
Bit rate
Sampling
rate
SOF0: baseline
SOF1: Extend
Sequential
SOF2:
Progressive
Min: 64 x 64
Max Type:
1366 x 768
32 kbps to 320
kbps
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
ENTERTAINMENT
Viewing Movies
21
5 Play a movie.
1 Press the Navigation buttons to scroll to My
Media and press OK.
NOTE
yy
Non-supported files are displayed the preview
image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
2 Press the Navigation buttons to scroll to Movie
List and press OK.
3 Press the Navigation buttons to scroll to a
6 Control playback by using the following buttons.
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
01:02:30 / 02:30:25
Page 1/1
Movie List
MENU
Drive1
USB1 USB Drive
001
002
005
006
003
Play
P
Page Change
Exit
Mark Mode
Page 1/1
Movie List
Mark Mode
Drive1
USB1 USB Drive
001
002
005
006
Exit
004
Move
Change Numbers
Hide
Page 1/1
Button
To Photo list
Option
Page 1/1
003
004
051. Apple_ ......
02:30:25
r
Description
Stops the playback.
s
Plays a video.
t
Pauses or resumes the playback.
v
Scans backward in a file.
w
MENU
Scans forward in a file.
HIDE
Hide the menu on the full-sized screen.
EXIT
Return to Movie List.
Skips to specific points in a file dur-
Show the Option menu.
ing playback. The time of a specific
Move
Play Marked
Menu
Mark All
Unmark All
Mark
Exit Mark Mode
P
Page Change
Exit
Description
Play Marked
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Mark All
Mark all movie files on the screen.
Unmark All
Deselect all marked movie files.
Exit Mark
Mode
Exit the Mark Mode.
< or >
point will appear on the status bar. In
some files, this function may not work
properly.
Adjusts the screen brightness to save
ENERGY
SAVING(
)
energy.
*Backlight function is not supported.
ENG
ENGLISH
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
22
ENTERTAINMENT
Tips for Using Playing Video Files
ENGLISH
ENG
yy
Some user-created subtitles may not work
properly.
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
Movie files produced with some encoders
may not be played correctly.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
Videos with resolutions higher than 1920
X 1080 @ 25/30 P may not work properly
depending on the frame.
yy
Movie files other than the specified types and
formats may not work properly.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yy
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
not supported for playback.
yy
A DivX movie file and its subtitle file must be
located in the same folder.
yy
A video file name and its subtitle file name
must be identical for it to be displayed.
yy
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
yy
Files encoded with GMC(Global Motion
Compensation) may not be played.
yy
When you are watching the movie by Movie
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Video Options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
yy
When replaying the video file after stopping,
you can play from where it stopped previously.
ENTERTAINMENT
When you select the Set Video Play,
German, Italian, Portuguese,
the Picture Size, Audio Language, Subtitle
Language or Repeat.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
Menu
Picture Size
Description
Selects your desired picture format
Audio
during movie play.
Changes the Language Group of the
Language
audio during movie play. Files
Support Language
English, Spanish, French,
Danish, Romanian, Norwegian,
Albanian, Gaelic, Welsh, Irish,
Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Latin2
Slovak, Slovenian, Serbian,
Latin4
Cyrillic
Hungarian
Estonian, Latvian, Lithuanian
Bulgarian, Macedonian, Russian,
Greek
Turkish
Korean
Ukrainian, Kazakh
Greek
Turkish
Korean
with a single audio track cannot be
selected.
Subtitle
Turn on/off the subtitle.
Language
Language
Activated for SMI subtitle and
can select the language within the
subtitle.
Code Page
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Sync
Adjusts the time synchronization of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
Position
Changes the position of the
subtitle either up or down during
movie play.
Size
Selects your desired Subtitle size
during movie play.
Repeat
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback is turned off, it can
run the playback if the file name is
similar to the previous file.
NOTE
yy
Only 10,000 of sync blocks can be supported
within the subtitle file.
yy
When playing a video, you can adjust the
Picture Size by pressing the ARC button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
ENG
ENGLISH
1 Press the Navigation buttons to scroll to show
Code Page
Latin1
23
24
ENTERTAINMENT
When you select the Set Video,
ENGLISH
ENG
1 Press the Navigation buttons to scroll to make
appropriate adjustments.
Page 1/1
Photo List
USB1 USB Drive
001
Drive1
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
When you select the Set Audio,
View
Move
Change Numbers
To Music List
009
P
Page Change
Exit
Mark Mode
1 Press the Navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
008
007
Page 1/1
Photo List
Mark Mode
USB1 USB Drive
Drive1
Page 1/1
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
011
003
004
005
006
012
013
014
015
Mark
Move
Viewing Photos
View Marked
Mark All
Unmark All
008
007
Exit Mark Mode
009
P
Page Change
Exit
View image files saved on a USB storage device.
The displays on the screen may differ from the
model.
View Marked
Display the selected photo file.
1 Press the Navigation buttons to scroll to My
Mark All
Mark all photo files on the screen.
Unmark All
Deselect all marked photo files.
Media and press OK.
2 Press the Navigation buttons to scroll to Photo
List and press OK.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
Menu
Description
Exit Mark Mode Exit the Mark Mode.
5 View photos.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
NOTE
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
ENTERTAINMENT
Using Photo Options
Option
Description
ENERGY
Adjusts the screen brightness to save
SAVING( ) energy.
*Backlight function is not supported.
Option
yySlide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
yyTransitionEffect: Set the view mode
of the slideshow.
yyBGM: Selects a music folder for
the background music. Press the
Navigation buttons to scroll to select
the Repeat or Random. Press the
Navigation buttons to scroll to make
appropriate adjustments.
NOTE
2/13
Slideshow
BGM
Options
Option
Slideshow
BGM
MENU
Option
Hide
Exit
yyYou cannot change the music
folder while the background music
is playing.
yyYou can only select the MP3 folder saved on the device that currently displays the photo.
Number of selected photos
Description
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos saved in the current folder display
during a slideshow.
To set a slideshow speed, select Option.
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust Option by MENU button
on the remote control.
(Rotate) Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
View the photo by zoom in 2, 4 times.
NOTE
yyPhotos with a resolution of
960x540 or less cannot be
enlarged.
Hide
EXIT
Hides the option window.
To display the options, press OK.
Return to Photo List.
Photo Options
1 Press MENU to show the Option menus.
2 Press the Navigation buttons to scroll to Set
Photo View, Set Video or Set Audio and press
OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
ENG
ENGLISH
Use the following options while viewing photos.
25
26
ENTERTAINMENT
When you select the Set Photo View,
ENGLISH
ENG
1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.
2 Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide.
Fade In
The current photo disappears and the next photo appears slowly.
ENTERTAINMENT
When you select the Set Video,
27
Listening to Music
appropriate adjustments.
1 Press the Navigation buttons to scroll to My Media and press OK.
2 Press the Navigation buttons to scroll to Music
When you select the Set Audio,
1 Press the Navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
List and press OK.
3 Press the Navigation buttons to scroll to a folder
you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Play
Move
Change Numbers
To Movie List
P
Page Change
Exit
Mark Mode
Page 1/1
Music List
Mark Mode
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play Marked
Menu
Mark All
Unmark All
Mark
P
Page Change
Exit Mark Mode
Exit
Description
Play Marked
Display the selected music file.
Mark All
Mark all music files on the screen.
Unmark All
Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
ENG
ENGLISH
1 Press the Navigation buttons to scroll to make
28
ENTERTAINMENT
6 Control playback by using the following buttons.
ENGLISH
ENG
3 file(s) Marked
004. - B04.mp3
00:00
Drive1
005. - B05.mp3
00:00
006. - B06.mp3
00:00
Page 1/1
007. - B07.mp3
00:00
005. - B05.mp3
NOTE
008. - B08.mp3
00:00
02:30 / 03:25
Play with Photo
Button
This unit cannot support the ID3 Tag
yy
embedded MP3 files.
Page 1/1
Music List
MENU
Option
Hide
Exit
Description
Stops playing back the file and moves
back to the music list.
Plays a music file.
Pauses or resumes playback.
Skips to the next file.
Skips to the previous file.
When playing,
When you press the v button, the previous music file will be played.
When you press the w button, the next
music file will be played.
Green
Start playing the selected music files and
button
then move to the Photo List.
ENERGY
Adjusts the screen brightness to save
SAVING( ) energy.
MENU
Show the Option menu.
Hides the option window.
Hide
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
EXIT
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
< or >
playback a cursor indicating the position
can be played.
or
Tips for Playing Music Files
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
yy
A damaged or corrupted music does not play
but displays 00:00 in playtime.
yy
A music downloaded from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
yy
If you press OK,
buttons, screen saver is
stopped.
yy
The PLAY( ), Pause( ),
, ,
buttons
on the remote control are also available in
this mode.
yy
You can use the
button to select the next
music and the
button to select the previous music.
file name
002. B02.mp3
00:31 / 04:04
Time elapsed /Duration
ENTERTAINMENT
Music Options
2 Press the Navigation buttons to scroll to Set Audio Play or Set Audio and press OK.
Viewing the Contents List
Plays back the stored files using the Export option
in SuperSign Manager.
1 Press the Navigation buttons to scroll to My
Media and press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and
Music List are changed likewise in Photo
List and Music List excluding Movie List.
When you select the Set Audio Play,
1 Press the Navigation buttons to scroll to select
the Repeat or Random.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
When you select the Set Audio,
1 Press the Navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
2 Press the Navigation buttons to scroll to Contents List and press OK.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Contents List
USB1 USB Drive
test1.cts
07/01/2011
Drive1
Page 1/1
test2.cts
07/01/2011
test3.cts
07/01/2011
test4.cts
07/01/2011
test5.cts
07/01/2011
Move
To Movie List
Change Numbers
Play
P
Page Change
Exit
NOTE
yy
While playing media files from Contents List,
only the BACK, EXIT or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
yy
If there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the TSP500
set.
ENG
ENGLISH
1 Press MENU to access the Pop-Up menus.
29
30
ENTERTAINMENT
DivX® VOD Guide
ENGLISH
ENG
DivX® VOD Registration
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
DivX® VOD Deregistration
You should deregister your device with 8 digit DivX
deregistration code from your device at www.divx.
com/vod.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
1 Press MENU to access the main menus.
3 Press the Blue button.
2 Press the Navigation buttons to scroll to MY
4 Press the Navigation buttons to scroll to Deacti-
3 Press the Blue button.
5 Press the Navigation buttons to select Yes to
MEDIA and press OK.
4 Press the Navigation buttons to scroll to DivX
vation and press OK.
confirm.
Reg. Code and press OK.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
5 View the registration code of your display.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
NOTE
yy
While you are checking the registration code,
some buttons may not work.
yy
If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
product.
yy
The video or audio files that are not converted by the standard DivX codec may be
corrupted or not be played.
yy
The DivX VOD code allows you to activate
up to 6 devices under one account.
Yes
No
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
Once the deregistration is executed, you
yy
must register your device again to see
DivX® VOD contents.
31
ENTERTAINMENT
Using PIP/PBP
5 Select the PIP or PBP icon from the play list.
ENG
ENGLISH
Displays videos or photos stored on a USB device
on a single display by dividing it into the main and
sub screens.
1 Press the MENU button to move to OPTION
and press OK.
2 Press PIP/PBP to select PIP or PBP and then
01:02:30 / 02:30:25
press OK.
MENU
Exit
Hide
Option
< Movie List >
PIP/PBP
Mode
Move
Pre.
Off
Position
PIP
Size
PBP
3 Select Movie List or Photo List from My
Media. (With PIP/PBP selected, the Music
List and Contents List are deactivated.)
2/13
Slideshow
MENU
BGM
Option
Hide
Exit
< Photo List >
Movie List
Photo List
Music List
Contents List
6 Select either Main or Sub for sound. You must
4 Select a file you want and then press OK.
to select the output sound before running the
PIP or PBP function.
Page 1/1
Movie List
Select the sound path.
Drive1
USB1 USB Drive
001
002
005
006
Page 1/1
Main
004
003
Sub
7 The sub screen is displayed on the main
screen.
Move
To Photo list
Change Numbers
Mark Mode
Play
P
Exit
Page Change
32
CUSTOMIZING SETTINGS
ENGLISH
ENG
CUSTOMIZING SETTINGS
Accessing the Main Menus
MARK
ARC
PSM
1 Press MENU to access the main menus.
P
BRIGHT A
NESS G
E
MUTE
MENU
2 Press the Navigation buttons to scroll to one of the following menus and
press OK.
S.MENU
OK
BACK
3 Press the Navigation buttons to scroll to the setting or option you want
AUTO
TILE
EXIT
ID
ON
OFF
and press OK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE
Adjusts the image size,
quality, or effect.
PICTURE
OPTION
Customizes the general
settings.
OPTION
AUDIO
Adjusts the sound quality,
effect, or volume level.
AUDIO
NETWORK
NETWORK
Sets up the network
setting.
TIME
MY MEDIA
TIME
Sets the time, date, or
Timer feature.
MY MEDIA
Display and play movie,
photo and music content
stored on your USB.
CUSTOMIZING SETTINGS
PICTURE Settings
PICTURE
Energy Saving
2 Press the Navigation buttons to scroll to PICTURE and
press OK.
OK
ENG
ENGLISH
Aspect Ratio
1 Press MENU to access the main menus.
Move
33
: 16:9
: Off
• Easy Brightness Control : Off
Smart Energy Saving : Off
Picture Mode
3 Press the Navigation buttons to scroll to the setting or
: Standard
Backlight
option you want and press OK.
70
Contrast 100
Brightness 50
-To return to the previous level, press BACK.
Sharpness 50
4 When you are finished, press EXIT.
Color
When you return to the previous menu, press
BACK.
60
Tint
0
R
G
Color Temp. 0
W
C
Advanced Control
Picture Reset
Screen
The available picture settings are described in the following:
Setting
Aspect Ratio
Description
Changes the image size to view images at its optimal size.
Energy Saving Sets to automatically adjust the screen brightness corresponding to the surroundings.
Level
Easy
Brightness
Control
Off
Disables Energy Saving function.
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
*Backlight function is not supported.
Screen Off
The screen turns off in 3 seconds.
Adjusts the backlight according to the schedule you set.
Mode
Off
Disables Easy Brightness Control.
On
Enables Easy Brightness Control.
NOTE
yyEasy Brightness Control is disabled if the current time is not set.
yyIf Energy Saving is set to Maximum, Easy Brightness Control is disabled.
yyYou can set up to six schedules and they will be sorted in time ascending order.
yyIf more than six schedules are added, the latest schedule will be automatically deleted.
yyYou can delete a schedule by pressing the OK button.
yyDuplicate schedules are not added, but the backlight value changes.
yyIt may not be supported depending on the model.
Smart Energy
Saving
Adjusts the backlight and contrast depending on the screen brightness.
*Backlight function is not supported.
Level
Off
Disables the Smart Energy Saving function.
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
34
CUSTOMIZING SETTINGS
Setting
ENGLISH
ENG
Picture Mode
Description
Selects one of the preset image or customizes options in each mode for the best screen performance.
You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the display set.
Mode
SCREEN
(In RGB
Mode Only)
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Configure
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Basic Image Options
Setting
Description
Backlight
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
*Backlight function is not supported.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp .
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options. Refer to the Advanced image options.
Picture Reset
Restores the options to the default setting.
CUSTOMIZING SETTINGS
35
Advanced Control
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (This function can be used
only under Component.)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
(Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can
be used only Component.)
Clear White
(Off/High/Low)
Make the white area of screen brighter and more white.
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise
Reduction
(Off/High/
Medium/Low)
Reduces screen noise without compromising video quality. (This function can be used only under
Component.)
Digital Noise
Reduction
(Off/High/
Medium/Low)
This option reduces the noise produced while creating digital video signals.
Gamma
(High/Medium/
Low)
Set your own gamma value. On the display, high gamma values display whitish images and low
gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - Component, HDMI-DTV, DVI-D)
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game
yy
the subsequent menus will be automatically set.
You cannot adjust Sharpness, Color and Tint in the RGB-PC/ DVI-D-PC(DTV)/ HDMI-PC mode.
yy
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
ENG
ENGLISH
Setting
Dynamic
Contrast
(Off/High/
Medium/Low)
36
CUSTOMIZING SETTINGS
Power Sequence
ENGLISH
ENG
CAUTION
TSP500 requires additional transparent display and backlight in order to display image properly.
yy
If you do not follow the booting sequence below while launching backlight, the screen may be
yy
displayed abnormally (blinking or vertical stripes).
90%
Power Supply For LCD 0V
V
LCD
Interface Signal (Tx)
90%
10%
10%
T1
T2
T8
Valid Data
100%
T5
Vcm : LVDS Common mode Voltage
30%
0V
10%
T3
T4
T6
User Control Signal
(LVDS_select, BIT_select)
Parameter
Lamp ON
T7
Power for Lamp
Value
Unit
Notes
Min
Typ
Max
T1
0.5
-
20
ms
T2
0
-
-
ms
4
T3
200
-
-
ms
3
T4
200
-
-
ms
3
T5
1.0
-
-
s
5
T6
-
-
T2
ms
4
T7
0.5
-
-
s
T8
100
-
-
ms
The T3 / T4 is recommended value, the case when failed to meet a minimum specification,
yy
abnormal display would be shown. There is no reliability problem.
6
37
CUSTOMIZING SETTINGS
AUDIO Settings
AUDIO
Clear Voice II
2 Press the Navigation buttons to scroll to AUDIO and press
Sound Mode
: Off
Balance
OK.
OK
0
L
R
: Standard
Infinite Sound : Off
Treble 50
3 Press the Navigation buttons to scroll to the setting or
Bass
option you want and press OK.
50
Reset
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
Digital Audio Input
: Audio In
Speaker
: On
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others, it helps users make dialog more clear.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
The most commanding and natural audio.
Music
Select this option to enjoy the original sound when listening to the music.
Cinema
Select this option to enjoy sublime sound.
Sport
Select this option to watch sports broadcasting.
Game
To enjoy dynamic sound when playing a game.
NOTE
If sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
Option
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound from two
speakers.
Treble
Controls the dominant sounds in the output. When you turn up the treble, it
will increase the output to the higher frequency range.
Bass
Makes the output sound softer. When you turn up the bass, it will increase
the output to the lower Frequency.
Reset
Resets the sound mode to the default setting.
Digital Audio
Input
HDMI: Outputs the sound of digital signal from HDMI through the TSP500 speaker.
Audio In: Outputs the sound through the TSP500 by connecting HDMI to the Audio In port.
Speaker
ON: Enables sound to the TSP500 speaker. (* The TSP500 speaker is sold separately.)
OFF: Disables sound to the TSP500 speaker. Use this option when using an external sound device.
ENG
ENGLISH
1 Press MENU to access the main menus.
Move
38
CUSTOMIZING SETTINGS
TIME Settings
TIME
Move
ENGLISH
ENG
1 Press MENU to access the main menus.
Clock
2 Press the Navigation buttons to scroll to TIME and press
Off Time
: Off
On Time
: Off
Sleep Timer
: Off
Power On Delay
: Off
Auto Off
: 15 min.
Automatic Standby
: Off
OK.
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
OK
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sets the time to turn on or off the TSP500 set.
Sleep Timer
Sets the length of time until the TSP500 set to turns off. When you turn the TSP500 set off and
turn it on again, the Sleep Timer will be set to off.
Power on delay
When connecting multiple TSP500s and turning the power on, the TSP500s are turned on
individually to prevent overload.
Auto off
If Auto off is active and there is no input signal, the TSP500 set switches to off mode automatically
after 15 minutes.
Automatic
Standby
If you do not use the TSP500 for more than 4 hours, it will be in standby mode automatically.
NOTE
yyOnce the on or off time is set, these functions operate daily at the preset time.
yyThe scheduled power-off function works properly only when the TSP500 set time is set correctly.
yyWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the
power-on time if the set is turned on, and vice versa if the TSP500 set is turned off.
The "Auto Off, Automatic Standby" function may not be available depending on the country.
yy
If time has not been reset for a long period of time, tolerance may occur due to environmental
yy
conditions, for example temperature.
39
CUSTOMIZING SETTINGS
OPTION Settings
OPTION
Move
Language
2 Press the Navigation buttons to scroll to OPTION and press
ISM Method
: Normal
DPM Select
: On
Fail Over
: Off
OK.
3 Press the Navigation buttons to scroll to the setting or option
Power Indicator
Factory Reset
you want and press OK.
Set ID
-To return to the previous level, press BACK.
Tile Mode
:1
PIP/PBP
4 When you are finished, press EXIT.
Key Lock
When you return to the previous menu, press BACK.
: Off
USB Content Recovery : Off
Product/Service Info.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
Power Indicator
Use this function to set the power indicator on the front side of the product to On or Off.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
DPM Select
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
A user can choose to turn the power saving mode on / off.
NOTE
yyYou can set Energy Saving to Off or set the length of time before entering Energy Saving
mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
yyIt makes a little difference according to your environment.
yyIt may not be supported depending on the model.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
ENG
ENGLISH
1 Press MENU to access the main menus.
OK
40
CUSTOMIZING SETTINGS
Setting
Description
ENGLISH
ENG
Factory Reset
Select this option to return to the default factory settings.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Tile Mode
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position
Moving the screen position horizontally and vertically.
Size
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
PIP/PBP
Displays videos or photos stored in the USB device on a single display by dividing it into the main
and sub screens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Adjusts the position of the sub screen (top left, bottom left, top right, bottom
right).
The default value is the bottom right.
Size
Adjusts the size of the sub screen (Size 0 to 10).
NOTE
yyThe Position and Size options are enabled only in PIP mode.
CUSTOMIZING SETTINGS
Setting
41
Description
Key input does not work. This prevents invalid key input.
USB Content
Recovery
Replays the content in a USB when the power is back on if it is turned off during playing a content.
(This function operates the same when a USB is disconnected and connected again.)
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
ENG
ENGLISH
Key Lock
42
CUSTOMIZING SETTINGS
Tile Mode
ENGLISH
ENG
This TSP500 set can be tiled with additional displays to create a large tiled display.
•Off
When the Tile Mode
option is disabled
•1X2
When using 2 displays
ID 1
3X3
When using 9 displays
•2X2
When using 4 displays
ID 2
ID 1
ID 2
ID 1
ID 2
ID 3
ID 3
ID 4
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
Tile ID
•4X4
When using 16 displays
•5X5
When using 25 displays
ID 1
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 5
ID 6
ID 7
ID 8
ID 6
ID 7
ID 8
ID 9
ID 10
ID 9
ID 10
ID 11
ID 12
ID 11
ID 12
ID 13
ID 14
ID 15
ID 13
ID 14
ID 15
ID 16
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
Tile Mode - Natural Mode
When active, the part of the image that would normally be displayed in the gap between the displays is
omitted.
Before
After
CUSTOMIZING SETTINGS
PIP/PBP
NOTE
yyThe subscreen is only supported when using the
USB device.
Mode
Sub
*PIP(Picture In Picture): Displays the Sub screen
in the main screen.
*PBP(Picture By Picture): Displays the Sub
screen next to the main screen.
Sub
screen
Main
screen
PIP
PBP
Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
top left
top right
USB
Main
Component
O
RGB
O
HDMI/DVI-D
O
AV
X
yyYou can only change the size and position in PIP
mode.
yyWith PBP selected, the Aspect Ratio option in the
PICTURE menu is disabled (Fixed as 16:9).
yyWhile running the PBP function, the Tile Mode function
does not work.
yyYou must select the output sound before running
the PIP or PBP functions. (Select either Main or
Sub.)
yyIf you fail to select Main or Sub from the sound
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
yyYou cannot change the sound while running the
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
yyThe picture quality of the subscreen is set
according to the values selected in the main menu,
not the USB device.
yyIf you play videos you selected in PIP/PBP mode,
the videos will play back repeatedly in succession.
yyThe buttons below work in PIP mode.
Button
bottom left
bottom right
Size
Adjusts the size of the subscreen (Size 0-10).
Photo
Movie
ENG
ENGLISH
Displays videos or photos stored in the USB device
on a single display by dividing it into the main and
sub screens.
43
44
CUSTOMIZING SETTINGS
Picture ID
ENGLISH
ENG
Picture ID is used to change the settings of a
specific display using a single IR receiver for
multi-vision. The set receiving the IR signal
communicates with another set via an RS-232C
connection. Each set is identified by a Set ID. If
you assign the Picture ID using the remote control,
only displays with the same Picture ID and Set ID
can be controlled remotely.
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
REMOTE
CONTROL IN
2 If you press the left/right buttons or press the
ON button repeatedly, the Picture ID cycles
through OFF and 1 to 4. Assign the ID you
want.
Picture ID
Off
◀
POWER
Close
IR Receiver
ENERGY
MONITOR
INPUT
.,!
GHI
PQRS
1/a/A
ON
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
Picture ID
◄
Off
►
Close
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
2X2 Multi-Vision (Total
SetE ID: 4)
Set IDs are assigned
as shown in the picture.
MUTE
MENU
AUTO
ENERGY
MONITOR
OFF
ON
▶
POWER
S.MENU
INPUT
OFF
SAVING
If you assign. , !the Set
each set with
yy
ABCID to DEF
multi-vision, and then assign the Picture ID
using the redGHIbuttonJKLon theMNOremote control,
the key command is displayed for the set
PQRS
TUV
WXYZ
with the same
Set ID
and Picture
ID. A set
with different
and
Picture
IDs
cannot
1/a/ASet IDs
CLEAR
-*#
be controlled by IRMARK
signals.
ARC on how to assign the
For more information
yy
Set ID, see "Set ID".
P
BRIGHT A
PSM
G
NESSPicture
The maximum value of the
ID can be
yy
E
set in the Total Set
ID
menu.
MUTE
Please refer to the Installation Manual for
yy
AUTO
more information
on Total
Set ID assignment.
S.MENU
MENU
1 Press the red ON button on the remote control
to assign the PictureOKID.
BACK
TILE
ID
ON
OFF
NOTE
EXIT
OK
For example, if the Picture ID is assigned
yy
EXIT (Set ID: 2) can
BACK right
TILE display
to 2, the upper
ID
be controlled
by
IR
signals.
OFF
ON
For each set, you can change the
yy
settings for the PICTURE, AUDIO, TIME,
NETWORK and MY MEDIA menus or the
hot keys on the remote control.
If you press the green OFF button for
yy
Picture IDs, the Picture IDs for all sets are
turned off. If you then press any button
on the remote control, all sets will start
working again.
Picture ID will be disabled while using the
yy
MY MEDIA menu.
CUSTOMIZING SETTINGS
NETWORK Settings
NETWORK
Move
Player Name Setting
Network Setting
: None
2 Press the Navigation buttons to scroll to NETWORK and
Network Status
: Not connected
press OK.
3 Press the Navigation buttons to scroll to the setting or option
Server IP Setting
Server IP Status
: Not connected
you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Setting
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Network Setting
Configure the network settings.
Network Status
Display the network status.
- Internet is connected : Externally connected
- Network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting
Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
OK
ENG
ENGLISH
1 Press MENU to access the main menus.
45
46
MAKING CONNECTIONS
MAKING CONNECTIONS
ENGLISH
ENG
Connect various external devices to the ports on the TSP500 set’s panel.
1 Find an external device you want to connect to your TSP500 set shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI
DVI
AV(CVBS)
Component
DVD
HDMI
DVI
AV(CVBS)
Component
VCR
AV(CVBS)
Component
Speaker
USB
Memory storage
PC
HDMI
DVI
RGB
LAN
Camcorder/Camera
HDMI
DVI
AV(CVBS)
Component
Gaming Device
HDMI
AV(CVBS)
Component
NOTE
If you connect a gaming device to the TSP500 set, use the cable supplied with the gaming device.
yy
MAKING CONNECTIONS
47
HDMI Connection
Connect a HD receiver, DVD player, or VCR to the
TSP500 set and select an appropriate input mode.
Transmits the digital video and audio signals from
an external device to the TSP500 set. Connect the
external device and the TSP500 set with the HDMI
cable as shown on the following illustration.
DVI Connection
Transmits the digital video signal from an external
device to the TSP500 set. Connect the external
device and the TSP500 set with the DVI cable as
shown in the following illustration. To transmit an
audio signal, connect an optional audio cable.
Side of the Product
Side of the Product
(not included)
(not
included)
(not included)
HDMI
DVI OUT
AUDIO OUT
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
ENG
ENGLISH
External Device Connection
48
MAKING CONNECTIONS
ENGLISH
ENG
Component Connection
AV(CVBS) Connection
Transmits the analog video and audio signals from
an external device to the TSP500 set. Connect
the external device and the TSP500 set with the
RCA-Component cable as shown in the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Transmits the analog video and audio signals from
an external device to the TSP500 set. Connect
the external device and the TSP500 set with
the Composite cable as shown in the following
illustration.
Side of the Product
Side of the Product
(not included)
(not
included)
(not included)
VIDEO
OUT
(not included)
VIDEO
AUDIO OUT
NOTE
When connecting to the AV or Component
yy
port using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
AUDIO
OUT
NOTE
For AV (CVBS) connection, the red and blue
yy
cables in a shared interface are not in use.
MAKING CONNECTIONS
Connecting to the LAN
PC
Network
or
B Using the Internet.
LAN
TSP500 Set
Network
PC
ENG
ENGLISH
Switch
TSP500 Set
Connecting to a USB
Connect a USB storage device such as a USB
flash memory, external hard drive, MP3 player or a
USB memory card reader to the TSP500 set and
access the USB menu to use various multimedia
files.
A Using a router(Switch)
LAN
49
50
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
No image is displayed
Problem
Is the product power cord
connected?
Is the power indicator light on?
Resolution
yy See if the power cord is properly connected to the outlet.
yy See if the power switch is turned on.
yy May need service.
yy Adjust brightness and contrast again.
ower is on but the screen
P
appears extremely dark.
The power indicator is blinking? yy If the product is in power saving mode, move the mouse or press any
key.
yy Turn both devices off and then back on.
Does the 'Invalid Format'
yy The signal from the PC (video card) is out of the vertical or horizontal
message appear?
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz
Does the 'No signal' message
yy The signal cable between PC and product is not connected. Check
appear?
the signal cable.
yy Press the 'INPUT' menu in the remote Control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
yy See if the plug&play function is supported by referring to the video
card user manual.
'Key Lock On' message appears.
Problem
The 'Key Lock On' message
appears when pressing the
Menu button.
Resolution
yy The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
TROUBLESHOOTING
51
The screen image looks abnormal.
Resolution
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Position] in OSD menu.
yy See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
background screen?
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Size] in OSD menu.
Horizontal noise appears or the yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
characters look blurred.
current mode. If adjustment is not satisfactory, select [PICTURE] [Screen] - [Phase] in OSD menu.
The screen is displayed
yy The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
Vertical, horizontal lines and
yy Stop using items such as wireless telephones, hair dryers, or electrical
meshes appear on the screen
drills, etc. because the problem is caused by high frequency electronic
momentarily and they are
devices or strong electro-magnetic sources. If you use the product
shaking.
near these devices, it may be powered off.
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
yy When a dark image is displayed on the screen after an image with
high contrast (black and white or gray), this may cause image sticking.
This is normal for LCD screen.
The audio function does not work.
Problem
No sound?
Sound is too dull.
Sound is too low.
Resolution
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Select the appropriate equalize sound.
yy Adjust the volume.
ENG
ENGLISH
Problem
Is the screen position wrong?
52
TROUBLESHOOTING
Screen color is abnormal.
ENGLISH
ENG
Problem
Resolution
Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
Screen color is unstable or
yy Check the connection status of the signal cable. Or, re-insert the PC
mono-colored.
video card.
Do black spots appear on the
yy Several pixels (red, green, white or black color) may appear on the
screen?
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Resolution
yy Is the sleep timer set?
yy Check the power control settings. Power interrupted.
SPECIFICATIONS
Video Signal
Input Connector
Power
Environmental
conditions
Max. Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video
card type.
Recommended Resolution RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video
card type.
Horizontal Frequency
RGB : 30 kHz to 83 kHz
HDMI/DVI : 30kHz to 83 kHz
Vertical Frequency
RGB : 56 Hz to 60 Hz
HDMI/DVI : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital, SOG
Synchronization Type
15-pin D-Sub type (RGB), HDMI/DVI(digital), RS-232C,
LAN, USB
DC 19 V
3.42 A
Rated Voltage
Power Consumption
On Mode : 18 W Typ.
Off Mode : = < 1 W
Operating Temperature
0 °C to 40 °C
Operating Humidity
10 % to 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
5 % to 95 %
Dimensions
(Width x Height x 198.2 mm x 144.7 mm x 29.3 mm / 700 g
Depth) / Weight
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
Speaker Impedance
5 W + 5 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
ENG
ENGLISH
SPECIFICATIONS
53
54
SPECIFICATIONS
Power Indicator
RGB (PC) Supported Mode
ENGLISH
ENG
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Mode
1366 x 768
47.7
60
On Mode
60
Sleep Mode
1920 x 1080
67.5
Product
Off Mode
Red
Amber
-
TSP500 supports resolution of FHD (1920 x 1080)
or HD (1366 x 768) depending on the connected
display set.
HDMI/DVI(PC) Supported Mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
1366 x 768
47.7
60
1920 x 1080
67.5
60
TSP500 supports resolution of FHD (1920 x 1080)
or HD (1366 x 768) depending on the connected
display set.
NOTE
PC resolutions available as the input label
yy
option in RGB and HDMI/DVI input mode :
640 x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920
x 1080 / 60 Hz and DTV resolutions : 480p,
720p, 1080p.
NOTE
DTV Mode
Resolution
HDMI(DTV)
1080p
o
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
IR CODES
55
IR CODES
ENG
ENGLISH
All models do not support the HDMI/USB function.
yy
Some key codes are not supported depending on the model.
yy
Code (Hexa)
Function
95
Energy Saving (
08
POWER
)
Note
R/C BUTTON
R/C BUTTON (ON/OFF)
0B
INPUT
R/C BUTTON
C4
Monitor On
R/C BUTTON
C5
Monitor Off
R/C BUTTON
43
MENU
R/C BUTTON
40
Up ( )
R/C BUTTON
41
Down ( )
R/C BUTTON
07
Left ( )
R/C BUTTON
06
Right ( )
R/C BUTTON
44
OK( )
28
BACK(
5B
EXIT
R/C BUTTON
4D
PSM
R/C BUTTON
02
Volume
R/C BUTTON
03
Volume
R/C BUTTON
09
MUTE
E0
BRIGHTNESS
(Page UP)
R/C BUTTON
E1
BRIGHTNESS
(Page Down)
R/C BUTTON
10 to 19
Number Key 0 to 9
R/C BUTTON
72
Red Key (ID ON)
R/C BUTTON
71
Green Key (ID OFF)
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
7B
TILE
R/C BUTTON
76
ARC (4:3)
R/C BUTTON
77
ARC (16:9)
R/C BUTTON
AF
ARC (ZOOM)
R/C BUTTON
79
ARC (MARK)
R/C BUTTON
99
Auto Config.
R/C BUTTON
R/C BUTTON
R/C BUTTON
)
R/C BUTTON
B1
R/C BUTTON
B0
R/C BUTTON
BA
R/C BUTTON
8F
R/C BUTTON
8E
R/C BUTTON
56
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
CONTROLLING THE MULTIPLE PRODUCT
Command Reference List
COMMAND
DATA
(Hexadecimal)
1
2
01. Power
k
a
00 to 01
02. Input Select
x
b
Refer to ‘Input Select.’
03. Aspect Ratio
k
c
Refer to ‘Aspect Ratio.’
04. Energy Saving
j
q
Refer to ‘Energy Saving.’
05. Picture mode
d
x
Refer to ‘Picture mode.’
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Sharpness
k
k
00 to 64
09. Color
k
i
00 to 64
10. Tint
k
j
00 to 64
11. Color Temperature
x
u
00 to 64
12. H Position
f
q
00 to 64
13. V Position
f
r
00 to 64
14. H Size
f
s
00 to 64
15. Auto configuration
j
u
01
16. Balance
k
t
00 to 64
17. Sound mode
d
y
Refer to ‘Sound mode.’
18. Treble
k
r
00 to 64
19. Bass
k
s
00 to 64
20. Speaker
d
v
00 to 01
21. Volume Mute
k
e
00 to 01
22. Volume Control
k
f
00 to 64
23. Time 1(Years/ Months/ Days)
f
a
Refer to ‘Time 1.’
24. Time 2(Hours/ Minutes/Seconds)
f
x
Refer to ‘Time 2.’
25. Off Timer(Repeat mode/ Time)
f
e
Refer to ‘Off Timer.’
26. On Timer(Repeat Mode/ Time)
f
d
Refer to ‘On Timer.’
27. On Timer Input
f
u
Refer to ‘On Timer Input.’
28. Sleep Time
f
f
00 to 08
29. Power On Delay
f
h
00 to 64
30. Automatic Standby
m
n
00 to 01
31. Auto Off
f
g
00 to 01
32. Language
f
i
Refer to ‘Language.’
33. Power Indicator(Standby Light)
f
o
00 to 01
34. Power Indicator(Power Light)
f
p
00 to 01
35. ISM mode
j
p
Refer to ‘ISM Method.’
36. Fail Over Select
m
i
00 to 02
37. Fail Over Input Select
m
j
Refer to ‘Fail Over Input Select.’
38. Reset
f
K
00 to 02
CONTROLLING THE MULTIPLE PRODUCT
COMMAND
2
39. Tile Mode
d
d
00 to 01
40. Tile Mode Check
d
z
FF
41. Tile ID
d
i
Refer to ‘Tile ID.’
42. Tile H Position
d
e
00 to 32
43. Tile V Position
d
f
00 to 32
44. Tile H Size
d
g
00 to 32
45. Tile V Size
d
h
00 to 32
46. Natural Mode (In Tile mode)
d
j
00 to 01
47. DPM Select
f
j
00 to 01
48. FAN Control
d
o
00 to 03
49. FAN Fault Check
d
w
FF
50. Temperature Value
d
n
FF
51. Remote Lock/ key Lock
k
m
00 to 01
52. Key
m
c
Refer to ‘Key.’
53. OSD Select
k
l
00 to 01
54. Elapsed time return
d
l
FF
55. Serial No. Check
f
y
FF
56. S/W Version
f
z
FF
57. White Balance Red Gain
j
m
00 to FE
58. White Balance Green Gain
j
n
00 to FE
59. White Balance Blue Gain
j
o
00 to FE
60. Backlight
m
g
00 to 64
61. PC Power Control
d
t
00 to 01
62. PC Power
d
s
00 to 01
63. Easy Brightness Control Mode
65. Status check
s
s
s
m
s
v
00 to 01
66. BLU Maintenance
m
t
00 to 01
67. Screen mute
k
d
00 to 01
64. Easy Brightness Control Schedule
Refer to ‘Easy Brightness Control Schedule.’
Refer to ‘Status check.’
Note : During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c)
yy
are not executed and treated as NG.
Some commands are not supported depending on the model.
yy
The ‘f f’ command which shows the status of a certain command does not display the OSD as the
yy
result in order to be compatible with SuperSign program.
ENG
ENGLISH
DATA
(Hexadecimal)
1
57
58
CONTROLLING THE MULTIPLE PRODUCT
Transmission / Receiving Protocol
ENGLISH
ENG
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0 x 00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0 x 0D’.
* [ ]: ASCII code space ‘0 x 20’
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* When the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is
in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the
data that is sent from the PC.
* If a command is sent with Set ID '00' (=0 x 00), the data is reflected to all monitor sets and they do send any
acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
* Some commands are not supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
To control the Power On/Off the display.
Data 00 : Off
01 : On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Only when the monitor set is fully powered on, the
Acknowledgement signal is returned properly.
* There may be a certain time of delay between the
Transmission and Acknowledgement signals.
04. Energy Saving (Command: j q)
To set the Energy Saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03. Maximum
04: Auto
05. Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
02. Input Select (Command: x b)
To select the Input Source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: Input (AV)
40: Component
60: RGB
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(HDMI1)(DTV)
A0: HDMI(HDMI1)(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
91: HDMI2/SDI(DTV)
A1: HDMI2/SDI(PC)
B0: SuperSign
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
05. Picture Mode (Command: d x)
To select the Picture Mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported
depending on the model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
02: 16:9
04: Zoom
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
09: Just scan (720p or more)
(Component, HDMI/ DVI-D/ Display Port DTV)
* RGB, DVI-D, HDMI/Display Port PC mode (1:1)
10 to 1F: Cinema Zoom 1 to 16
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
* Available data types differ depending on the input
signal. For more information, see the aspect ratio
section of the owner's manual.
* The aspect ratio may differ depending on the
model's input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
59
60
CONTROLLING THE MULTIPLE PRODUCT
07. Brightness (Command: k h)
To adjust the screen brightness.
ENGLISH
ENG
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
To adjust the screen sharpness.
* This function is available only in AV/Component
input.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust the screen color.
* This function is available only in AV/Component
input.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
To adjust the screen tint.
* This function is available only in AV/Component
input.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint R50 to G50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
To adjust the screen Color Temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
12. H Position (Command: f q)
To adjust the screen Horizontal Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. -50 (Left) to max. 50 (Right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
16. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to 64: min. -50 (Bottom) to max. 50 (Top)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
14. H Size (Command: f s)
To adjust the screen Horizontal Size.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data 00 - 64: Min. -50 (Reduce) - Max. 50 (Expand)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Auto Configuration (Command: j u)
To adjust the picture position and minimize image
shaking automatically.
(Only available for RGB-PC input.)
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
To select the Sound Mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sport
05. Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
To adjust the Treble values.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
13. V Position (Command: f r)
To adjust the screen Vertical Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
61
62
CONTROLLING THE MULTIPLE PRODUCT
19. Bass (Command: k s)
To adjust the Bass values.
ENGLISH
ENG
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Bass 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
To select the speaker on/off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
22. Volume Control (Command: k f)
To set the playback volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
23. Time 1(Year/ Month/ Day) (Command: f a)
To set the Time 1(Year/ Month/ Day) values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 100 to 14: 2010 to 2030
Data 201 to 0C: January to December
Data 301 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1(Year/
Month/ Day) values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
21. Volume Mute (Command: k e)
To control the Volume Mute on/off.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Mute (Volume Off)
01 : Current volume (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
24. Time 2(Hour/ Minute/ Second) (Command: f x)
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 17: 00 to 23 hours
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2(Hour/
Minute/ Second) values.
** This command won’t work if Time 1(Year/ Month/
Day) has not been set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
CONTROLLING THE MULTIPLE PRODUCT
63
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st Off Time data
F2: Read the 2nd Off Time data
F3: Read the 3rd Off Time data
F4: Read the 4th Off Time data
F5: Read the 5th Off Time data
F6: Read the 6th Off Time data
F7: Read the 7th Off Time data
2. E1-E7 (Delete one index), E0 (Delete all indexes)
E0: Delete all Off Time data
E1: Delete the 1st Off Time data
E2: Delete the 2nd Off Time data
E3: Delete the 3rd Off Time data
E4: Delete the 4th Off Time data
E5: Delete the 5th Off Time data
E6: Delete the 6th Off Time data
E7: Delete the 7th Off Time data
3. 01 to 0C (Set the day of week for Off Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fe 01 f1 ff ff - Read the 1st Off Time
data.)
(Example 2: fe 01 e1 ff ff - Delete the 1st Off Time
data.)
(Example 3: fe 01 04 02 03 - Set the Off Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
1. F1 to F7 (Read data)
F1: Read the 1st On Time data
F2: Read the 2nd On Time data
F3: Read the 3rd On Time data
F4: Read the 4th On Time data
F5: Read the 5th On Time data
F6: Read the 6th On Time data
F7: Read the 7th On Time data
2. E1-E7 (Delete one index), E0 (Delete all indexes)
E0: Delete all On Time data
E1: Delete the 1st On Time data
E2: Delete the 2nd On Time data
E3: Delete the 3rd On Time data
E4: Delete the 4th On Time data
E5: Delete the 5th On Time data
E6: Delete the 6th On Time data
E7: Delete the 7th On Time data
3. 01 to 0C (Set the day of week for On Time)
00: Off
01: Once
02. Daily
03: Monday to Friday
04: Monday to Saturday
05: Saturday to Sunday
06. Sunday
07. Monday
08. Tuesday
09. Wednesday
0A. Thursday
0B. Friday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fd 01 f1 ff ff - Read the 1st On Time
data.)
(Example 2: fd 01 e1 ff ff - Delete the 1st On Time
data.)
(Example 3: fd 01 04 02 03 - Set the On Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENG
ENGLISH
25. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat Mode/ Time) function.
64
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
27. On Timer Input (Command: f u)
To select an external input for the current On Time
setting and add a new schedule or change the
existing schedule.
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
Data (Add schedule)
20: Input (AV)
40: Component
60. RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
Data1 (Change schedule)
1. F1 to F7 (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component
60: RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
* To read the schedule input, enter FFH for [Data2].
If no schedule is available for [Data1] when
attempting to read or change the schedule data, the
text NG will be displayed and the operation fails.
(Example 1: fu 01 60 - Move each schedule input
down one row and save the 1st schedule input in
RGB mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule
input.)
(Example 3: fu 01 f3 20 - Change the 3rd data
schedule input to the current On Time and AV input.
If there is no third schedule, the text NG will be
displayed and the operation fails.)
* This function is supported only when 1 (Year/
Month/Day), 2 (Hour/Minute/Second), On Time
(Repeat Mode/Time) are set.
** It may not be supported depending on the model.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
28. Sleep Time (Command: f f)
To set the Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00: Off (Sleep Timer off)
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on. (Unit: Second)
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to max. 100 (sec.)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
30. Automatic Standby (Command: m n)
To set the Automatic Standby function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 4 hours)
01: 4 Hours (Off after 4 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
31. Auto Off (Command: f g)
To set the Auto Off function.
Data 00: Off (No off after 15 minutes)
01: 15 min.(Off after 15 minutes)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
To set the language for OSD.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish (EU)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese (Cantonese)
34. Power Indicator (Power Light) (Command: f p)
To set the Power Indicator (Power Light) function.
Transmission
[f][p][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
35. ISM mode (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08. Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
33. Power Indicator (Standby Light) (Command: f o)
To set the Power Indicator (Standby Light) function.
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
36. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
65
66
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
37. Fail Over Input Select (Command: m j)
To select the input source for auto switch.
* This command is only available when the fail over
(auto) mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[ ][Data4][ ][Data5][Cr]
Data 1 to 5 (Priority 1 to 5)
60: RGB
70: DVI-D
90: HDMI(HDMI1)
C0: Display Port
91: HDMI2/SDI
* The number of data items differs depending on the
model.
40. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Check Tile Mode status.
** It may not be supported depending on the model.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
Data2
Data3
00: Tile Mode Off
01: Tile Mode On
00 to 0F: Tile Row
00 to 0F: Tile Column
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[ ][Data5][x]
41. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
38. Reset (Command: f k)
To execute the Picture, Screen, Audio and Factory
reset function.
(Screen Reset can only be performed in RGB input
mode.)
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile
Row).
** It may not be supported depending on the model.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
*NG will be return if data is over (Tile Column) x (Tile
Row), except 0xFF.
00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
42. Tile H Position (Command: d e)
To adjust the Tile Horizontal position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
39. Tile Mode (Command: d d)
To set a Tile Mode and Tile Column/ Row values.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: 1st byte - Tile Row
2nd byte - Tile Column
*00, 01, 10, 11 means Tile Mode Off
** It may not be supported depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 32: -50 (Left) to 0 (Right)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 0 to 32: 0 (Bottom) to 50 (Top)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
44. Tile H Size (Command: d g)
To adjust the Tile Horizontal Size.
*Set Tile H Position to 0x32 before setting Tile H
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
46. Natural Mode (In Tile Mode) (Command : d j)
To display the image naturally, the part of the image
that would normally be displayed in the gap between
the monitors is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
47. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
* Data settings may vary depending on your model
as below.
Data 00: Off
01: 5 sec.
02: 10 sec.
03: 15 sec.
04: 1 min.
05: 3 min.
06: 5 min.
07: 10 min.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Tile V Size (Command: d h)
To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
48. FAN Control (Command : d o)
To set the Fan mode.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
03: Off
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
43. Tile V Position (Command: d f)
To adjust the Tile Vertical position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
67
68
CONTROLLING THE MULTIPLE PRODUCT
49. FAN Fault Check (Command: d w)
To check the fan errors.
ENGLISH
ENG
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Fan fault
01: Fan OK
02: Model without a Fan
50. Temperature Value (Command: d n)
To check the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
52. Key (Command: m c)
To send a key code of the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For a key code, see the IR Code.
* Some key codes are not supported depending on
the model.
53. OSD Select (Command: k l)
To select OSD(On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed in hexadecimal.
51. Remote Controller Lock/ Key Lock
(Command: k m)
When the remote control and front keys are locked in
standby mode, the power cannot be turned on using
the remote control or front power button.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01: On (Lock On)
* Display will not be turned on by power on key of
remote controller and front panel control keys, if key
is locked on in standby mode.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
54. Elapsed time return (Command: d l)
To check the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
CONTROLLING THE MULTIPLE PRODUCT
55. Serial No.Check (Command: f y)
To check the Serial Numbers.
Data FF: Check the product Serial Number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
58. White Balance Green Gain (Command: j n)
To set the White Balance Green Gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green Gain 0 to 254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
56. S/W Version (Command: f z)
To check the Software Version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check the Software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
57. White Balance Red Gain (Command: j m)
To set the White Balance Red Gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red Gain 0 to 254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
59. White Balance Blue Gain (Command: j o)
To set the White Balance Blue Gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue Gain 0 to 254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
60. Backlight (Command: m g)
To adjust the screen backlight.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
** It may not be supported depending on the model.
ENG
ENGLISH
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
69
70
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
61. PC Power Control (Command: d t)
To control the PC power if the PC and the monitor
are synchronized.
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
Data
00: S
ynchronized (When the monitor is off, the PC is
also turned off.)
01: N
ot synchronized (The monitor is off but the PC
is on.)
02: M
aintain the power-on state of the PC. (When
you turn on the monitor while the Media Player is
turned off, the Media Player is turned on.)
** It may not be supported depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
62. PC Power (Command: d s)
Control the PC power.
Transmission
[d][s][ ][Set ID][ ][Data][Cr]
Data 00: PC is turned off.
01: PC is turned on.
** It may not be supported depending on the model.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
64. Easy Brightness Control Schedule (Command: s
s)
Sets the Easy Brightness Control Schedule.
Transmission
[s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1 - F6 (Data Reading Functions)
F1: Reads the data of the 1st Easy Brightness
Control
F2: Reads the data of the 2nd Easy Brightness
Control
F3: Reads the data of the 3rd Easy Brightness
Control
F4: Reads the data of the 4th Easy Brightness
Control
F5: Reads the data of the 5th Easy Brightness
Control
F6: Reads the data of the 6th Easy Brightness
Control
2. E1-E6 (Deletes One Index), E0 (Delete All
Indexes)
E0: Deletes all Easy Brightness Controls
E1: Deletes the 1st Easy Brightness Control
E2: Deletes the 2nd Easy Brightness Control
E3: Deletes the 3rd Easy Brightness Control
E4: Deletes the 4th Easy Brightness Control
E5: Deletes the 5th Easy Brightness Control
E6: Deletes the 6th Easy Brightness Control
3. 00-17: 00 - 23:00
Data2 00-3B: 00 - 59 minutes
Data3 00-64: backlight 0 - 100
* To read or delete the configured Easy Brightness
Control list, set [Data2][Data3] to FF.
(ex1: ss 01 f1 ff ff - Reads the 1st index data from the
Easy Brightness Control.
ex2: ss 01 e1 ff ff - Deletes the 1st index data from
the Easy Brightness Control.
ex3: ss 01 07 1E 46 - Adds a schedule to the
backlight 70 at 07:30.)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
** It may not be supported, depending on the model.
63. Easy Brightness Control Mode (Command: s m)
Selects ON/OFF of Easy Brightness Control Mode.
Transmission
[s][m][ ][Set ID][ ][Data][Cr]
Data 00: Easy Brightness Control OFF
01: Easy Brightness Control ON
* It does not work if the current time is not set up.
** It may not be supported, depending on the model.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
65. Status check (Command: s v)
Check various statuses.
Data 05: Check the normal operation of No.1 and
No.2 luminance sensors.
06: luminance sensor being used:
07: Check the normal operation of top, bottom,
or main temperature sensors.
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
66. BLU Maintenance (Command: m t)
Select ON/OFF of BLU Maintenance.
Transmission
[m][t][ ][Set ID][ ][Data][Cr]
Data 00: BLU Maintenance OFF
01: BLU Maintenance ON
** It may not be supported, depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
When the Data is 05
Data100: All normal
01: BLU sensor 1 normal, BLU sensor 2 fail
02: BLU sensor 1 fail, BLU sensor 2 normal
03: All fail
When the Data is 06
Data100: No.1 luminance sensor is being used
01: No.2 luminance sensor is being used
When the Data is 07
Data100: All temperature sensors fail
01: Top normal, Bottom fail, Main fail
02: Top fail, Bottom normal, Main fail
03: Top normal, Bottom normal, Main fail
04: Top fail, Bottom fail, Main normal
05: Top normal, Bottom fail, Main fail
06: Top fail, Bottom normal, Main fail
07: All temperature sensors normal
When the Data is 08
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][Data3][x]
Data1: Temperature of the top sensor area when the
set is powered off.
Data2: Temperature of the bottom sensor area when
the set is powered off.
Data3: Temperature of the main sensor area when
the set is powered off.
When the Data is 09
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][x]
Data1 00-ff: Upper 2-byte of Fan Speed
Data2 00-ff: Lower 2-byte of Fan Speed
Fan Speed: Hex 0-20D0, Decimal 0-8400
** It may not be supported, depending on the model.
67. Screen mute (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Turns the screen on.
01: Turns the screen off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
71
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.
Temporary noise is normal when powering ON or
OFF this device.
Download PDF

advertising