LG | W1943TE-PF | LG W1943TE-PF Owner’s Manual

User’s Guide
W1943TE
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
A1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
A2
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or
other liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A3
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
Stand Body
Stand Base
3. Tie down the base lock to perpendicularity direction.
4.
Once assembled take the monitor up carefully and face
the front side
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
A4
Connecting the Display
Disassembling the stand
1. Put a cushion or soft cloth on a flat
2. Place the monitor face down on
surface.
3.
the cushion or soft cloth.
Change your lock on the product as it follows and turn it in the arrow direction.
If you can't release the stand base even the locking rib is at a release position,
Please push the indicated rib down and retry it.
4. Pull out the stand to remove.
A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range: -5˚~15˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.
A6
Connecting the Display
Using the Computer
1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form 1 to 2 .
NOTE
A Connect DVI-D Cable
B Connect D-sub Cable (PC)
C Connect D-sub Cable (Mac)
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ
from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable)
with ferrite cores to maintain standard compliance for the product.
Power Cord
Signal Cable
Varies according to model.
Wall-outlet type
Or
Mac adapter
For Apple Macintosh use, a separate plug adapter is
needed to change the 15 pin high density (3 row) D-sub
VGA connector on the supplied cable to a 15 pin 2 row
connector.
Wall-outlet type
DVI-D (This feature is not available in all countries.)
2. Press
button on the front switch panel to turn the
power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve
resolution.
A7
Connecting the Display
OPEN
Using the cable holder (This feature is not available in all models.)
Cable holder
2
OPEN
1
4
3
EN
OP
A8
Control Panel Functions
Front Panel Controls
Control
Button
MENU Button
Function
Use this button to enter 4:3 IN WIDE, PHOTO EFFECT
items, for more information, refer to page A17.
Use this button to enter or exit from the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so
that these settings are not inadvertently changed. To lock the
OSD settings, press and hold the MENU button for several
seconds. The message "OSD LOCKED" appears.
You can unlock the OSD settings at any time by
pushing the MENU button for several seconds. The
message "OSD UNLOCKED" appears.
A9
Control Panel Functions
Control
Function
Buttons
Button
(
Use these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A18.
)
Button
(source)
AUTO/SET
Button
Use this button to make either D-sub or DVI connector
avtive.This feature is used when two computers are
connected to this display.The default setting is D-sub.
Use this button to select an icon in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode).
The best display mode is:
W1943TE: 1360 x 768
Power Button
Use this button to turn the display on or off.
Power Indicator
This Indicator lights up as red when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to flicker.
A10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the
/
Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Button once to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A11
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment, and
setting menus.
Main menu
Sub-menu
A D
4:3 IN WIDE
Reference
To adjust the image size
NORMAL
PHOTO
EFFECT
GAUSSIAN BLUR
To adjust screen color mode
SEPIA
MONOCHROME
BRIGHTNESS
PICTURE
To adjust the brightness, contrast and
gamma of the screen
CONTRAST
GAMMA
sRGB
PRESET
6500K
9300K
COLOR
To costomize the color of the screen
RED
GREEN
BLUE
HORIZONTAL
To adjust the position of the screen
VERTICAL
TRACKING
CLOCK
To improve the clarity and stability of the
screen
PHASE
SHARPNESS
LANGUAGE
SETUP
HORIZONTAL
OSD
POSITION VERTICAL
To costomize the screen status for a
user's operating environment
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
MOVIE
INTERNET
FLATRON
F-ENGINE
To select or customize desired image
settings
USER
NORMAL
DEMO
: Adjustable
A : Analog Input
D : Digital Input
NOTE
The order of icons may differ depending on the model (A12~A18 ).
A12
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Main Menu
MENU
: Exit
: Adjust (Decrease/Increase)
SET
: Enter
: Select another sub-menu
: Restart to select sub-menu
Button Tip
Menu Name
Sub-menus
Icons
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
A13
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
PICTURE
BRIGHTNESS
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
COLOR
COLOR
PRESET
• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
RED
Set your own red color levels.
Set your own green color levels.
GREEN
MENU : Exit
: Decrease
BLUE
: Increase
SET : Select another sub-menu
Set your own blue color levels.
A14
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
TRACKING
TRACKING
HORIZONTAL
To move image left and right.
VERTICAL
To move image up and down.
CLOCK
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
MENU : Exit
: Decrease
SHARPNESS
: Increase
SET : Select another sub-menu
A15
To adjust the clearness of the
screen.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
LANGUAGE
To choose the language in which the
control names are displayed.
OSD
POSITION
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
FACTORY
RESET
Restore all factory default settings except
"LANGUAGE."
Press the
,
buttons to reset immediately.
SETUP
SETUP
MENU : Exit
: Adjust
: Adjust
SET : Select another
sub-menu
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
A16
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
monitor.
Main menu
button on the right bottom of the
Sub menu
4:3 IN WIDE
Description
To select the image size of the screen.
WIDE
4:3
• WIDE: Switch to full screen mode according to
input image signal.
• 4 : 3: Change the image signal ratio into 4:3.
PHOTO EFFECT
- NORMAL:
The PhotoEffect function is disabled.
- GAUSSIAN BLUR:
This option is to add the effect to the screen
that the dark and sharp image becomes
brighter and more blurred.
- SEPIA:
This option changes the screen to be Sepia
tone. The Sepia tone is brown color tone.
- MONOCHROME:
This option changed the screen to be Gray
tone. The screen is displayed by white, black,
gray.
A17
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
the monitor.
button on the right bottom of
Menu Name
Icons
Sub-menu Name
Main menu
Sub menu
Description
MOVIE This feature lets you easily select the best desired
INTERNET image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation images in videos or movies
INTERNET: For text images (Word processing etc.)
MENU : Exit
,
: Move
USER
To adjust the USER sub-menu
function,press the AUTO/SET Button.
User
You can manually adjust ACE or RCM.
You can save or restore the adjusted value even
when using a different environment.
...ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
...RCM(Real Color Management): Selects the color mode.
0
1
2
3
Not applied
Green enhance
Flesh tone
Color Enhance
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
NORMAL This is under normal operating conditions.
* Normal mode is when f-ENGINE is turned off.
DEMO
This is just for advertising to customer in the
shops. It’s setting is same with Movie mode and
screen is divided by half.
A18
Troubleshooting
Check the following before calling for service.
No image appears
● Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
● Is the power indicator
light on?
• Press the Power button.
● Is the power indicator
flickering?
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
● Do you see an "OUT OF • This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message on
frequency range of the display. See the
the screen?
'Specifications' section of this manual and
configure your display again.
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
● Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
A19
Troubleshooting
Display image is incorrect
● Display Position is
incorrect.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
● On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may
be blurred and the screen may be dimmed, truncated or biased. Make sure to
select the recommend resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
A20
Troubleshooting
Display image is incorrect
● The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
•Make sure the video card is properly inserted in
the slot.
•Set the color setting higher than 24 bits (true color)
at Control Panel -Settings .
● The screen blinks.
• Check if the screen is set to interlace mode and if
yes,change it to the recommend resolution.
Have you installed the display driver?
● Have you installed
the display driver?
• Be sure to install the display driver from the display
driver CD (or diskette)that comes with your
display.Or,you can also download the driver from
our web site:http://www.lge.com.
• Make sure to check if the video card supports
● Do you see an
"Unrecognized monitor, Plug&Play function.
Plug&Play (VESA DDC)
monitor found"
message?
A21
Specifications
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Tilt Range
Power Input
AC-DC Adapter
Environmental
Conditions
Stand Base
Power cord
W1943TE
18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 47.0 cm
0.300*0.300 mm pixel pitch
Horizontal Freq.
Analog : 30 - 61 kHz (Automatic)
Digital : 30 - 61 kHz (Automatic)
Vertical Freq.
56 - 75 Hz (Automatic)
Input Form
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital(HDCP)
Signal Input
15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form
RGB Analog (0.7 Vp-p/ 75 ohm),Digital
Max
Anlaog: VESA 1360 x 768 @ 60 Hz
Digital: VESA 1360 x 768 @60 Hz
Recommend
VESA:1360 x 768 @60 Hz
DDC 2B(Digital),DDC 2AB(Anlaog)
:
21W(Typ.)
On Mode
Sleep Mode
≤
1W
Off Mode
≤
1W
With Stand
Without Stand
Width
44.90 cm / 17.68 inches
44.90 cm / 17.68 inches
Height 36.08 cm / 14.20 inches
29.10 cm / 11.46 inches
Depth 18.30 cm / 7.20 inches
5.56 cm / 2.19 inches
Net
2.5 kg (5.62 lbs)
Tilt
-5˚~ 15˚
12V
2.0A
Type ADS-24S-12 1224G*,manufactured by HONOR Electronic
or type MU24-B120200-xx,manufactured by LEADER Electronics
or type LCAP07F,manufactured by Lien Chang
or type DSA-50W-12 1 120420,manufactured by Dee Van
or type LCAP08F,manufactured by Lien Chang
or type ADS-24NP-12-1 12024G,manufactured by HONOR Electronic
or type DSA-36W-12 1 24,manufactured by Dee Van
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
NOTE
Information in this document is subject to change without notice.
A22
Specifications
Preset Modes (Resolution)
W1943TE
Display Modes (Resolution)
1
2
3
4
5
6
7
8
*9
Horizontal Freq. (kHz)
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
47.712
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1360 x 768
Vertical Freq. (Hz)
70
60
75
60
75
75
60
75
60
* Recommend Mode
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
Red
Flicker
Off
A23
Digitally yours
Download PDF