LG | DM2740DAB | LG DM2740DAB Owner’s Manual

ENGLISH
OWNER’S MANUAL
DVD Micro
Hi-Fi System
Please read this manual carefully before operating
your set and retain it for future reference.
DM2740DAB (DM2740DAB, CMS2730F)
www.lg.com
DM2740-CB_DAUSLLK_ENG.indd 1
2014-04-14
4:43:53
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
DM2740-CB_DAUSLLK_ENG.indd 2
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
2014-04-14
4:43:55
Getting Started
This device is equipped with a portable battery or
accumulator.
yy The appliance is not intended for use by young
children or infirm persons without supervision.
yy Young Children should be supervised to ensure
that they do not play with appliance.
yy If the appliance is supplied from a cord extension
set or an electrical portable outlet device, the
cord extension set on electrical portable outlet
device must be positioned so that it is not
subject to splashing or ingress of moisture.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance of 20 cm from your body.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Notes on Copyrights
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, video tapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
DM2740-CB_DAUSLLK_ENG.indd 3
2014-04-14
4:43:55
4
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6
Unique Features
6Accessories
7Introduction
7
– Playable Discs
7
– About the “7” Symbol Display
7
– Symbols Used in this Manual
7
– Regional Codes
8
Playable file Requirement
9
Remote control
10 Front panel
12 Rear panel
2Connecting
13
13
14
15
15
16
16
16
16
16
17
18
3 System Setting
19
19
19
20
20
21
21
22
DM2740-CB_DAUSLLK_ENG.indd 4
Attaching the speakers to the unit
Connections to Your TV
– HDMI Out Connection
– Video Connection
– Resolution Setting
Optional Equipment Connection
– AUDIO (PORT. IN) In Connection
– Listening to music from your portable
player or external device
– OPTICAL In connection
– Speaker ez setup
Antenna Connection
– USB Connection
Adjust the setup settings
– OSD Initial language settings Optional
– To display and exit the Setup menu
– Language
– Display
– Audio
– Lock (Parental Control)
– Others
2014-04-14
4:43:56
Table of Contents
4Operating
5Troubleshooting
23
23
24
24
24
24
24
25
25
25
25
25
25
26
26
27
28
28
28
29
29
29
29
30
30
30
30
30
30
30
30
31
31
36Troubleshooting
31
31
31
32
32
33
33
Using the Home Menu
Basic Operations
Other Operations
– Displaying Disc Information on-screen
– To display the DVD Menu
– To display the DVD title
– 1.5 times speed playback
– Starting play from selected time
– Resume playback
– Changing subtitle code page
– Last Scene Memory
– Screen Saver
– Power Resume - Optional
– Marked Playback
– Viewing a PHOTO file
– System Select - Optional
Setting the Clock
– Using your player as an alarm clock
– Sleep Timer Setting
– Dimmer
– Turn off the sound temporarily
– DEMO
– Auto Power Down
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting all the saved stations
– Deleting a saved station
– Improving poor FM reception
– Listening to the DAB
– Aligning the service names
– DAB scan
– Deleting all of the saved DAB scan
stations
Sound adjustment
– Setting the surround mode
– Adjust the speaker level settings
Advanced Operations
– Recording to USB
Using a Bluetooth® wireless technology
– Listening to music of a Bluetooth
device
DM2740-CB_DAUSLLK_ENG.indd 5
5
1
6Appendix
37 Area Code List
38 Language code List
39 Trademarks and Licenses
40Specifications
42Maintenance
42 – Handling the Unit
42 – Notes on Discs
2
3
4
5
6
2014-04-14
4:43:56
6
Getting Started
Unique Features
1
Portable In
Accessories
Please check and identify the supplied accessories.
Getting Started
Listens to music from your portable device. (MP3,
Notebook, etc)
USB Direct Recording
Records music from CD to your USB device.
Remote control (1)
Battery (1)
FM antenna (1)
Video cable (1)
HDMI cable (1)
DAB antenna (1)
Full HD up-scaling
Views Full HD picture quality with simple setup.
Bluetooth
Listens to music stored on your bluetooth device.
NFC Tag
You can easily connect to Bluetooth devices
through NFC Tag.
DM2740-CB_DAUSLLK_ENG.indd 6
2014-04-14
4:43:59
Getting Started
Introduction
Playable Discs
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm / 12 cm disc)
Video mode and finalized only.
DVD-RW (8 cm / 12 cm disc)
Video mode and finalized only.
DVD+R: Video mode only
Supports the double layer disc also.
DVD+RW (8 cm / 12 cm disc)
Video mode and finalized only.
Audio CD: Music CDs or CD-R/CDRW in music CD format that can be
purchased.
About the “7” Symbol Display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
DM2740-CB_DAUSLLK_ENG.indd 7
Symbols Used in this Manual
r
DVD-Video, DVD±R/RW in Video
mode or VR mode and finalized
t
Audio CDs
y
Video files contained in the
USB/Disc
u
Audio files contained in the
USB/Disc
i
Photo files
1
Getting Started
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, DivX, MP3, WMA and/or
JPEG files. Some DVD±RW/DVD±R or CD-RW/
CD-R cannot be played on this unit due to the
recording quality or physical condition of the disc,
or the characteristics of the recording device and
authoring software.
7
,,Note
Indicates special notes and operating features.
,,Tip
Indicates tip and hints for making the task easier.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Regional Codes
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled
same as the rear of the unit or “ALL”.
yy Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
yy If you try to play a DVD with a different regional
code from your unit, the message “Check
Regional Code” appears on the TV screen.
2014-04-14
4:44:02
8
Getting Started
Playable file
Requirement
1
Getting Started
Music file requirement
MP3/ WMA file compatibility with this unit is limited
as follows :
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Support Version : v2, v7, v8, v9
yy Maximum files : Under 999
yy File extensions : “.mp3”/ “.wma”
yy CD-ROM file format : ISO9660/ JOLIET
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
yy You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live File
System, you cannot use it on LG players.
(Mastered/ Live File System : Disc format system
for Windows Vista)
DTS is not supported, (In the case of playing DTS
audio format, there will be no audio output.)
Photo file requirement
Photo file compatibility with this unit is limited as
follows :
yy Max pixel in width : 2 760 x 2 048 pixel
yy Maximum files : Under 999
DivX file requirement
DivX file compatibility with this unit is limited as
follows:
yy Available resolution: up to 720 x 576 (W x H)
pixels.
yy The file name of the DivX subtitle should be
entered within 45 characters.
yy If there is impossible code to express in the
DivX file, it may be displayed as “ _ “ mark on the
display.
yy Frame rate : less than 30 fps.
yy If the video and audio structure of recorded
files is not interleaved, either video or audio is
outputted.
yy Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx”
yy Playable Subtitle format : SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt), Vobsub (*.sub)
yy Playable Codec format : “DIVX3.11”, “DIVX4”,
“DIVX5”, “DIVX6”.
yy Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192
kbps (WMA)
yy For Discs formatted in Live file system, you can
not it on this unit.
yy If the name of movie file is different from that of
the subtitle file, during playback of a DivX file,
subtitle may not be display.
yy If you play a DivX file differ from DivXspec, it may
not operate normally.
yy Some discs may not operate due to a different
recording format or the condition of disc.
yy File extensions: “.jpg”
yy CD-ROM file format : ISO9660/ JOLIET
DM2740-CB_DAUSLLK_ENG.indd 8
2014-04-14
4:44:03
Getting Started
Remote control
• • • • • • a • • • • • •
• • • • • • d • • • • • •
P RADIO&INPUT: Changes
input sources.
SPEAKER LEVEL: Sets the sound
level of desired speaker.
MARKER: Marks play list.
SOUND EFFECT: Selects a sound
effect mode.
B OPEN/CLOSE: Ejects or insert
the disc from slot loader.
SLEEP: Sets the System to turn off
automatically at a specified time.
(Dimmer : The display window will
be darken by half.)
m INFO/DISPLAY: Accesses OnScreen Display.
n HOME: Displays the [Home
Menu].
OPTICAL: Changes input source
to optical directly.
MUTE: Mutes the sound.
• • • • • • e • • • • • •
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a number when
setting the password.
DISC MENU: Accesses the menu
on a DVD disc.
REPEAT: Selects a play mode.
(Repeat/ Random)
• • • • • • b • • • • • •
• • • • • • f • • • • • •
W/S/A/D (up/ down/ left/
right): Used to navigate on-screen
displays.
PRESET +/-: Selects programme
of Radio.
TUNING -/+: Tunes in the desired
radio station.
Battery Installation
VOL +/- (Volume): Adjusts
speaker volume.
b ENTER: Acknowledges menu
selection.
Presetting the radio stations.
x RETURN: Moves backwards
in the menu or exits the setup
menu.
TITLE: If the current DVD title has
a menu, the title menu appears
on the screen. Otherwise, the disc
menu may not appear.
• • • • • • c • • • • • •
C/V SKIP: Goes to the next
or previous chapter / track / file.
1
Getting Started
1 POWER: Switches the unit ON
or OFF.
}vjhsGmhkly
9
TV Control buttons: Controls the
TV. (LG TV only)
-- You can control the sound lev
el, input source, and power
switching of LG TVs as well.
Hold POWER (TV) and press PR/
CH (+/-) button repeatedly until
the TV turns on or off.
X REC: USB Direct Recording.
?: This button is not available.
DAB INFO:
-- DAB radio type.
-- Changes the display
information of DAB channel.
SORT/SCAN:
-- Searches radio stations by radio
type.
-- Aligning the service names
DAB band scanning.
c/v SCAN: Searches
backward or forward.
Remove the battery cover on the
rear of the Remote Control, and
insert one (size AAA) battery with
4 and 5 matched correctly.
DM2740-CB_DAUSLLK_ENG.indd 9
Z STOP: Stops playback.
d PLAY, MONO/STEREO: Starts
playback. Selects Mono/ Stereo.
M PAUSE/STEP: Pauses playback.
2014-04-14
4:44:05
10
Getting Started
Front panel
1
Getting Started
DM2740-CB_DAUSLLK_ENG.indd 10
2014-04-14
4:44:05
Getting Started
a Disc Slot
Insert a disc in the disc slot with the label side
left.
b
You can easily connect to Bluetooth devices
through NFC Tag.
c 1/! (POWER)
Switches the unit ON or OFF.
>>Caution
Precautions in using the touch buttons
yy Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before
using.
d Display window
Shows the current status of the unit.
yy Do not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
e FUNC. (FUNCTION)
Changes the input source or function.
yy Touch the button that you want to work in
order to operate the function correctly.
f USB Port
Connects an USB device.
yy Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
g EQ
Chooses sound impressions.
1
Getting Started
11
SET/DEMO
Confirms the setting. Show DEMO.
ALARM
With the ALARM function you can turn DVD/
CD, USB play and TUNER reception on at a
desired time.
CLOCK
For setting the clock and checking the time.
h B (OPEN/CLOSE)
Ejects or insert the disc from slot loader.
i C/V (Skip/Search):
Goes to next or previous file/track.
Searches backward or forward (Press and hold)
Tunes in the desired radio station.
d/M (PLAY / PAUSE)
Starts playback.
Pauses playback temporarily, press again to exit
pause mode.
Selects stereo/mono in FM mode.
j o / p (VOLUME)
Adjusts speaker volume.
Z (STOP)
Stops playback.
k USB REC.
Recoding to USB.
l PORT. IN
Connects to a portable player with audio
outputs.
PHONES
Headphone jack
DM2740-CB_DAUSLLK_ENG.indd 11
2014-04-14
4:44:06
12
Getting Started
Rear panel
1
Getting Started
a DAB ANTENNA
Connects the DAB antenna.
f SPEAKERS terminal
b HDMI OUT
Connects to TV with HDMI inputs.
(Interface for digital audio and video)
h Power cord
g Cooling Fan
c ANTENNA (FM)
Connects the FM wired antenna
d VIDEO OUT
Connects to a TV with video inputs.
e OPTICAL IN
Connects to optical audio equipment.
DM2740-CB_DAUSLLK_ENG.indd 12
2014-04-14
4:44:06
Connecting
13
Attaching the speakers
to the unit
Connections to Your
TV
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
Make one of the following connections, depending
on the capabilities of your existing equipment.
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
,,Note
yy Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
2
Connecting
yy Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the player.
Use only one of the connections described
in this manual.
>>Caution
yy Make sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel
>>Caution
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
DM2740-CB_DAUSLLK_ENG.indd 13
yy Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
2014-04-14
4:44:07
14
Connecting
HDMI Out Connection
If you have a HDMI TV or monitor, you can connect
it to this unit using a HDMI cable (Type A, High
Speed HDMI™ cable).
Connect the HDMI OUT jack on the unit to the
HDMI IN jack on a HDMI compatible TV or monitor.
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
2
Connecting
Unit
,,Note
yy If a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or
may not output.
yy When you connect a HDMI or DVI
compatible device make sure of the
following:
- Try switching off the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this unit.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 480i (or 576i), 720 x 480p (or 576p),
1280 x 720p, 1920 x 1080i or 1920 x 1080p
video input.
yy Not all HDCP-compatible HDMI or DVI
devices will work with this unit.
TV
,,Tip
yy You can fully enjoy digital audio and video
signals together with this HDMI connection.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution” on page 15.)
- The picture will not be displayed properly
with non-HDCP device.
- This unit does not playback and TV screen
is changed to black or green screen or the
snow noise may occur on the screen.
yy If there is noise or lines on the screen, please
check the HDMI cable and usea higher
version cable than High Speed HDMI™
cable.
>>Caution
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the unit and then turn it
on again.
yy When the HDMI connection with HDCP is
not verified, TV screen is changed to black
or green screen or the snow noise may
occur on the screen. In this case, check the
HDMI connection, or disconnect the HDMI
cable.
DM2740-CB_DAUSLLK_ENG.indd 14
2014-04-14
4:44:08
Connecting
15
Video Connection
Resolution Setting
Connect the VIDEO OUT jack on the unit to the
video in jack on the TV using a video cable.
The unit provides several output resolutions for
HDMI OUT TO TV.
You can change the resolution using [Setup] menu.
You can hear the sound through the system’s
speakers.
Unit
1.Press n HOME.
2.Use A/D to select the [Setup] and press b
ENTER. The [Setup] menu appears.
2
Connecting
TV
3.Use W/S to select [Display] option then press
D to move to the second level.
4.Use W/S to select the [Resolution] option
then press D to move to the third level.
Yellow
5.Use W/S to select the desired resolution then
press b ENTER to confirm your selection.
,,Note
If your TV does not accept the resolution you
have set on the player, you can set resolution
to 480p (or 576p) as follows:
Press Z STOP for more than 5 seconds.
Video Output Resolution
Displayed resolution in display window and
outputted resolution may different according to
connection type.
[HDMI OUT]: 1080p, 1080i, 720p and 480p (or 576p)
and 480i (or 576i)
[VIDEO OUT]: 480i (or 576i).
DM2740-CB_DAUSLLK_ENG.indd 15
2014-04-14
4:44:09
16
Connecting
Optional Equipment
Connection
OPTICAL In connection
Connect an optical output of Unit (or Digital Device
etc) to the OPTICAL IN connector.
AUDIO (PORT. IN) In
Connection
2
Connect an output of portable device (MP3 or PMP
etc) to the AUDIO (PORT. IN) input connector.
Connecting
To the digital
optical output jack of your
component
Speaker ez setup
Listening to music from your
portable player or external
device
Listen to sound from TV, DVD and Digital Device
with 2 ch mode. Even in power off mode, if you
press OPTICAL, then power is on and automatically
changed to AUX OPT mode.
1. Connect the unit’s OPTICAL IN jack to jack on
optical out of your TV (or Digital Device etc.).
The unit can be used to play the music from many
types of portable player or external devices.
2. Select the AUX OPT by using the OPTICAL.
To select the AUX OPT directly.
1. Connect the portable player to the
PORT.IN(PORTABLE IN) connector of the unit.
3. Listen sound with 2 ch speaker.
2. Turn the power on by pressing 1 (POWER).
4. To escape from AUX OPT by using the OPTICAL.
Function is retuned to previous one.
3. Select the PORTABLE function by pressing
P RADIO&INPUT.
4. Turn on the portable player or external device
and start it playing.
DM2740-CB_DAUSLLK_ENG.indd 16
2014-04-14
4:44:10
Connecting
17
Antenna Connection
Connect the supplied FM and DAB antenna for
listening to the radio.
Connect the FM wire antenna to the FM antenna
connector.
Connect the DAB antenna to the DAB antenna
connector.
2
Connecting
,,Note
yy Be sure to fully extend the FM wire antenna.
yy When the broadcasting signal is weak
: Check the condition of broadcasting
reception. (check the QUALITY)
yy When moving the unit to other areas.
: It could delete all of the saved DAB scan
station.
DM2740-CB_DAUSLLK_ENG.indd 17
2014-04-14
4:44:11
18
Connecting
USB Connection
Compatible USB Devices
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :Devices that support USB2.0
or USB1.1.
yy The USB function of this unit does not support
some USB devices.
USB device requirement
2
Connecting
,,Note
Removing the USB Device from the unit
1. Choose a different function mode or press
Z on the unit or Z STOP on the remote
control twice in a row.
2. Remove the USB device from the unit.
DM2740-CB_DAUSLLK_ENG.indd 18
yy Devices which require additional program
installation connected to a computer, are not
supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than
a few minute to be searched.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Using NTFS file system is not supported. (Only
FAT(16/32) file system is supported.)
yy This unit is not supported when the total
number of files is 1 000 or more.
yy External HDD, Card readers, Locked devices, or hard type usb devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
2014-04-14
4:44:11
3
System Setting
System Setting
Adjust the setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
19
To display and exit the Setup
menu
1.Press n HOME.
Displays the [Home Menu].
You can also set a language for the subtitles and
the Setup menu, among other things. For details on
each Setup menu item, see pages 19 to 22.
2. Select an [Setup] by using A D.
3.Press b ENTER.
Displays the [Setup].
During the first use of this unit, the initial language
setup menu appears on your TV screen. You must
complete initial language selection before using
the unit. English will be selected as the initial
language.
About help menu for Setup
1.Press 1 (POWER) to turn the unit on. The
language setup menu will appear on the screen.
4.Press n HOME or x RETURN to exit in the
[Setup] Menu.
Menu
Buttons
Operation
WS
Moving to another
menu.
a
Move
A
Moving to previous
level.
d
Move
D
Moving to next
level or selecting
menu.
x RETURN
To exit the [Setup]
menu.
b ENTER
To confirm menu.
ws
Move
x
2.Use WSAD to select a language then press
b ENTER.
The confirm menu will appear.
Close
b
Select
3
System Setting
OSD Initial language settings
- Optional
3.Use AD to select the [Enter] then press b
ENTER to finish the language setup.
DM2740-CB_DAUSLLK_ENG.indd 19
2014-04-14
4:44:12
20 System Setting
Language
Display Mode
Menu Language
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
Select a language for the Setup menu and then on
screen display.
[Letterbox]
Disc Audio / Disc Subtitle / Disc
Menu
[Panscan]
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
3
Refers to the original language in which the
disc was recorded.
System Setting
[Other]
To select another language, press numeric
buttons and then b ENTER to enter the
corresponding 4-digit number according to
the language code list on the page 38. If you
enter the wrong language code, press CLEAR.
[Off (for Disc Subtitle)]
Turn off Subtitle.
Display
TV Aspect
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Displays a wide picture with bands on the
upper and lower portions of the screen.
Automatically displays the wide picture on the
entire screen and cuts off the portions that do
not fit. (If the disc/file is not compatible with
Pan Scan, the picture is displayed at Letterbox
ratio.)
Resolution
Sets the output resolution of the HDMI video signal.
Refer to “Resolution Setting” for details about the
resolution (page 15).
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV. If the VIDEO OUT is only
connected, this changes the resolution to 480i
(or 576i) as default resolution.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p (or 576p)]
Outputs 480 (or 576) lines of progressive video.
[480i (or 576i)]
Outputs 480 (or (576) lines of interlaced video.
DM2740-CB_DAUSLLK_ENG.indd 20
2014-04-14
4:44:12
System Setting
21
Audio
Lock (Parental Control)
DRC (Dynamic Range Control)
Initial Setting the Area Code
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
When you use this unit for the first time, you have
to set the Area Code.
Vocal
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
HD AV Sync
3. Select the first character using WS buttons.
4.Press b ENTER and select the second character
using WS buttons.
5.Press b ENTER to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
3
System Setting
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive:
this is called HD AV Sync. Use WS (on the remote
control) to scroll up and down through the delay
amount, which you can set at anything between 0
and 300ms.
1. Select the [Lock] menu and then press D.
2.Press D.
To access the [Lock] options, you must input the
password you have created. Input a password
and press b ENTER. Enter it again and press b
ENTER to verify. If you make a mistake before
pressing b ENTER, press CLEAR.
1. Select [Rating] on the [Lock] menu then press
D.
2. Input a password and press b ENTER.
3. Select a rating from 1 to 8 using the WS
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not
active and the disc plays in full.
4.Press b ENTER to confirm your rating selection.
DM2740-CB_DAUSLLK_ENG.indd 21
2014-04-14
4:44:12
22 System Setting
Password
Others
You can enter or change password.
1. Select [Password] on the [Lock] menu and then
press D.
2.Press b ENTER.
3. Input a password and press b ENTER.
To change the password, press b ENTER when
the [Change] option is highlighted. Input a
password and press b ENTER. Enter it again
and press b ENTER to verify.
4.Press n HOME to exit the menu.
,,Note
3
If you forget your password, you can clear it
using the following steps:
System Setting
1. Select the [Setup] menu on the [Home
Menu].
2. Input the 6-digit number “210499” and
press b ENTER. The password is cleared.
DivX(R) VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified®
device that has passed rigorous testing to verify
that it plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]
Displays the registration code of your unit.
[Deregister]
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 37.
1. Select [Area Code] on the [Lock] menu then
press D.
Deactivate your unit and display the
deactivation code.
,,Note
All the downloaded videos from DivX® VOD
can only be played back on this unit.
2. Input a password and press b ENTER.
3. Select the first character using WS buttons.
4.Press b ENTER and select the second character
using WS buttons.
5.Press b ENTER to confirm your Area code
selection.
DM2740-CB_DAUSLLK_ENG.indd 22
2014-04-14
4:44:12
Operating 23
Using the Home Menu
1.Press n HOME.
Displays the [Home Menu].
To
Stop
Playback
Pause
Do this
Press Z STOP
Press d PLAY, MONO/STEREO
Press M PAUSE/STEP
Press M PAUSE/STEP
Frame-byrepeatedly to play title FrameFrame playback
by-Frame. (DVD, DivX only)
2. Select an option by using AD.
3.Press b ENTER then selected option menu.
[Music] – Displays [MUSIC] menu.
[Movie] – Start video media’s playback or displays
the [MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
[Setup] – Displays the [Setup] menu.
,,Note
Basic Operations
1. Insert the disc by using the B OPEN/CLOSE or
Connect the USB device to the USB port.
2.Press n HOME.
Displays the [Home Menu].
Locating a
point quickly by
playing a file in
fast forward or
fast reverse
Playing
repeatedly or
randomly
3. Select an option by using AD.
If you select the [Movie], [Photo] or [Music]
option when you connect up to two devices, it
appears as belows. Select a media then press b
ENTER.
4.Press b ENTER then selected option menu.
,,Note
During playback, press
c/v SCAN repeatedly to
select the required scan speed.
To return to normal speed,
press d PLAY, MONO/
STEREO.
Press REPEAT repeatedly,
and the current title, chapter
or track will be played back
repeatedly or randomly.
4
Operating
You can not select the [Music], [Movie] or
[Photo] option when the USB device is not
connected or a disc is not inserted.
During playback, press
C/V SKIP to go to the
Skipping to the next chapter/ track/ file or to
next/ previous return to the beginning of the
chapter/ track/ current chapter/ track/ file.
file
Press C SKIP twice briefly
to step back to the previous
chapter/ track/ file.
- DVD : Chapter/ Title/ Off
- DivX : Title/ All/ Off
- Audio CD/ MP3/ WMA : Track/
All/ Random/ Off
Slowing down
the playing
speed
In the pause mode, press
SLOW (c or v) to select
the required speed. (DVD, DivX
only) The DivX file cannot be
slow down reverse playback.
yy For the most Audio CD and DVD-ROM discs,
playback starts automatically.
yy The unit plays only music file contained in
the USB storage device or disc automatically.
DM2740-CB_DAUSLLK_ENG.indd 23
2014-04-14
4:44:12
24 Operating
Other Operations
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
1.Press m INFO/DISPLAY to show various
playback information.
The displayed items differ depending on the
disc type or playing status.
2. You can select an item by pressing WS and
change or select the setting by pressing AD.
Title – Current title number/ total number of titles.
Chapter – Current chapter number/ total number
of chapters.
4
To display the DVD title
r
When you play a DVD which contains several title,
you can select the title you want using the Menu.
1.Press TITLE.
The disc’s title appears.
2. Select the menu by pressing WSAD.
3.Press d PLAY, MONO/STEREO to confirm.
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
Time – Elapsed playing time.
1. During playback, press d PLAY, MONO/
STEREO to play at 1.5 times speed. “dX1.5”
appears on the screen.
Audio – Selected audio language or channel.
2.Press d PLAY, MONO/STEREO again to exit.
Operating
Subtitle – Selected subtitle.
Angle – Selected angle/ total number of angles.
,,Note
If any button is not pressed for a few seconds,
the on-screen display disappears.
To display the DVD Menu
r
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
1.Press DISC MENU.
The disc’s menu appears.
2. Select the menu by using WSAD.
3.Press d PLAY, MONO/STEREO to confirm.
DM2740-CB_DAUSLLK_ENG.indd 24
2014-04-14
4:44:12
Operating 25
Starting play from selected
time
ry
To start playing at any chosen time on the file or
title.
Changing subtitle code page
y
If the subtitle is not displayed properly, you can
change the subtitle code page to view the subtitle
file properly.
1.Press m INFO/DISPLAY during playback.
1. During playback, press m INFO/DISPLAY to
display the On-Screen display.
2.Press WS to select the time clock icon and
“--:--:--” appears.
2.Use WS to select the [Code Page] option.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by using
numerical buttons.
4.Press b ENTER to confirm. Playback starts from
the selected time.
ryut
The unit records the point where you pressed the
Z STOP depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d PLAY, MONO/STEREO to resume playback
(from the scene point).
If you press Z STOP twice or unload the disc,
“Z”(Complete Stop) appears on the screen. The
unit will clear the stopped point.
,,Note
4.Press x RETURN to exit the On-Screen display.
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Screen Saver
The screen saver appears when you leave the unit
in Stop mode for about five minutes.
4
Operating
Resume playback
3.Use AD to select desired code option.
Power Resume - Optional
r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save
current playback status.
The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B OPEN/CLOSE, etc).
DM2740-CB_DAUSLLK_ENG.indd 25
2014-04-14
4:44:12
26 Operating
Marked Playback
ut
The mark function enables you to store your
favourite files from any disc or USB device in the
unit memory.
1. Select [Music] on the [Home Menu].
Returning to the upper folder.
(MP3/ WMA only)
File information will be displayed
according to the ID3TAG information
on the appropriate music file. (MP3
only)
To delete a Marker
1.Use WS to select the track that you wish to erase
from the marked file.
2.Press MARKER.
To delete all Markers
Use WSAD to select [Deselect All] then press b
ENTER in program edit mode.
,,Note
The markers are also cleared when the disc or
USB device is removed, the unit is switched to
power off or the function is switched to others.
Viewing a PHOTO file
i
This unit can play discs with photo files.
4
Operating
1. Select [Photo] on the [Home Menu] and press
b ENTER.
Selecting all tracks/ files.
Deselecting all tracks/files.
Moving to the previous or
next file list.
Moving to the previous or
next file list.
2. Select a desired music on the [List] by using the
WS then press MARKER to appears the mark on
the list.
3.Press b ENTER or d PLAY, MONO/STEREO.
Displays the play mode.
4. Select the play mode by using the WS and press
b ENTER.
[Mark Play]
Marked playback.
[Current Play]
Normal playback.
,,Note
Returning to the upper
folder.
2.Press W S to select a folder, and then press b
ENTER.
3. If you want to view a slide show, press W S
to highlight a file and press d PLAY, MONO/
STEREO.
If you want to select all files on the list, select
[Select All] and press b ENTER.
DM2740-CB_DAUSLLK_ENG.indd 26
2014-04-14
4:44:12
Operating 27
About help menu in the [Photo] menu
Menu
Buttons
d Slide
Show
d
PLAY, MONO/
STEREO
Operation
wsad
Move
SWAD
Moving to another
file or content.
b
Select
b ENTER
Viewing a particular
file.
x
Close
x RETURN
Viewing a slide
show.
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press
m INFO/DISPLAY to display the option menu.
2. Select an option using WSAD.
Returning to the
[Home Menu].
About help menu in the full screen
a
Menu
Buttons
Operation
Menu
m
INFO/
DISPLAY
Displaying the Option
menu.
a/d
Prev./ Next
A/D
Moving to another file.
b Slide Show z/M– Press  ENTER to start
or pause slide show.
Returning to the
[Photo] menu.
c Speed x3/ x2/ x1 – Use  ENTER to select
a delaying speed between photos in a slide
show.
x
RETURN
b c
de
a Current photo/ Total number of photos –
Use AD to view previous/next photo.
4
Operating
x
Close
d Rotate – Press  ENTER to rotate the photo.
e Go to list – Press  ENTER to return [Photo]
menu.
System Select - Optional
You must select the appropriate system mode for
your TV system. Press and hold M PAUSE/STEP
for more than five seconds to be able to select a
system in the [Home Menu].
,,Note
If the USB device is connected or a disc is
inserted, this function is not operated.
DM2740-CB_DAUSLLK_ENG.indd 27
2014-04-14
4:44:13
28 Operating
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK.
3. Select time mode by pressing C/V.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press SET/DEMO to confirm your selection.
5. Select the hours by pressing C/V.
6.Press SET/DEMO.
7. Select the minutes by pressing C/V.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ by pressing
CLOCK even when the player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ and setting
informaiton by pressing ALARM even when
the unit is turned off.
yy Press ALARM, you can selects a ALARM on
/ off mode.
8.Press SET/DEMO.
Using your player as an alarm
clock
4
Sleep Timer Setting
Operating
1. Turn the unit on.
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
2. Press and hold ALARM.
To check the remaining time, press SLEEP.
3.Press C/V to change the hours and
minutes and press SET/DEMO to save.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
4. Press C/V to select function and press
SET/DEMO.
5.Press C/V to change the volume and
press SET/DEMO to save. The clock icon “(“
shows that the alarm is set.
DM2740-CB_DAUSLLK_ENG.indd 28
,,Note
You can check the remaining time before the
Unit turns off.
Press SLEEP The remaining time appears in the
display window.
2014-04-14
4:44:13
Operating 29
Dimmer
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off. If touch the buttons in Sleep Timer
mode, the buttons will be lightening for 5 seconds
and darkening again.
Turn off the sound temporarily
Press
MUTE to mute your unit.
You can mute your unit, for example, to answer
the telephone, the “q” is displayed in the display
window.
DEMO
In the power off state, it demonstrates the function
on display window by pressing DEMO. To cancel
the DEMO, press it again.
,,Note
4
Operating
hile DEMO, this unit will keep DEMO
yy W
status even if you unplug the power cord
connection.
ou can enjoy other functions during
yy Y
the DEMO. Then the DEMO will pause to
temporary.
-Without input key in 10 sec, the DEMO
will play back automatically.
Auto Power Down
This unit will power off itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 20
minutes.
This unit will power off after six hours when
connected to a device using an analog input.
DM2740-CB_DAUSLLK_ENG.indd 29
2014-04-14
4:44:13
30 Operating
Radio Operations
Be sure that FM and DAB aerial is connected. (Refer
to the page 17.)
Listening to the radio
1.Press P RADIO&INPUT until FM or DAB
appears in the display window.
The last received station is tuned in.
2. [FM]
Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING (-/+) repeatedly.
4
[DAB]
Press TUNING (-/+) and press d PLAY.
Operating
3. Adjust the volume by rotating -/+ on the front
panel or by pressing VOL (+/-)on the remote
control repeatedly. In DAB function, press d
PLAY, MONO/STEREO to start.
Presetting the Radio Stations
You can preset 50 stations for FM or DAB.
Before tuning, make sure that you have turned
down the volume.
1.Press P RADIO&INPUT until FM or DAB
appears in the display window.
2. [FM]
Select the desired frequency by using
TUNING (-/+).
[DAB]
Press TUNING (-/+) and press d PLAY.
3.Press b ENTER a preset number will flash in
the display window.
4.Press PRESET (-/+) to select the preset number
you want.
5.Press b ENTER. The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Deleting a saved station
1.Press PRESET - / + to Select a preset number
you want to delete.
2.Press CLEAR, the preset number will blink in the
display window.
3.Press CLEAR again, to delete the selected
preset number.
Improving poor FM reception
Press d PLAY, MONO/STEREO on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Listening to the DAB
You can change the display information of the
currently broadcasting DABchannel. Press
DAB INFO. on the remote control repeatedly, the
display changes in the following order,
SERVICE -> PTY NAME -> FREQ -> DLS -> QUALITY
-> ENSEMBLE
SERVICE
isplays the Name of the channel for
D
the current broadcast.
PTY NAMEDisplays the Type of the channel for
the current broadcast.
FREQDisplays the frequency of the channel
for the current broadcast.
DLS
It displays the current Scroll of the
channel which is selected.
QUALITY
It displays the current strength of the
broadcast signal in Bar form.
ENSEMBLE
Displays the Ensemble of the channel
for the current broadcast.
Aligning the service names
Press SORT/SCAN on the remote control to display
the sorting mode of DAB broadcastings. Then, press
the button once again to change the mode.
Default sort:The service names are aligned in a
scanning order.
Name sort:The service names are aligned in an
alphabetical order.
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up on the unit display.
2. Press CLEAR to erase all saved of the radio stations.
DM2740-CB_DAUSLLK_ENG.indd 30
2014-04-14
4:44:13
Operating
31
DAB scan
On Display
Description
Press SORT/SCAN on the remote control for longer
than 3 seconds, all ofthe DAB bands are scanned.
Then press it again, scanning will be cancelled.
MP3 -- OPT
This function is optimized for
compressible MP3, WMA file. It
improves the treble sound.
Deleting all of the saved DAB
scan stations
BASS BLAST
During playback, reinforce
the treble, bass and surround
sound effect.
Press and hold DAB INFO. on the remote control
for 3 seconds. “DAB INIT” will be displayed. Press
DAB INFO. to erase all the saved stations.
LOUDNESS
Improves the bass and treble
sound.
BYPASS
Sound adjustment
Setting the surround mode
You can change the SOUND EFFECT using A D
arrow key while the sound effect information is
displayed on.
The displayed items for the equalizer maybe
different depending on sound sources and effects.
On Display
NATURAL
Description
You can enjoy comfortable
and natural sound.
Regionally optimized
sound effect. (DANGDUT/
Local
Specialization ARABIC/ PERSIAN/ INDIA/
REGUETON/ MERENGUE/
equalizer
(Optional)
SALSA/ SAMBA/ CUMBIA/
AFRO)
AUTO EQ
POP
CLASSIC
JAZZ
ROCK
,,Note
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
yy You may need to reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
Adjust the speaker level
settings
4
Operating
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
You can enjoy the sound
without equalizer effect.
You can adjust the sound level of each speaker.
1.Press SPEAKER LEVEL repeatedly to select a
desired speaker to set.
2.Press VOL -/+ to adjust the sound level of the
selected speaker while the level setting memu
is displayed on the display window.
3. Repeat and adjust the sound level of the other
speakers.
Realizes the sound equalizer
that is the most similar to the
genre of which is included in
the MP3 ID3 tag of song files.
This program lends an
enthusiastic atmosphere to
the sound, giving you the
feeling you are at an actual
pop, classic, jazz, rock or
concert.
DM2740-CB_DAUSLLK_ENG.indd 31
2014-04-14
4:44:13
32 Operating
Advanced Operations
Recording to USB
You can record music or sound souce to USB device
by connecting in to the port on the unit.
yy During recording MP3/WMA, there is no
sound.
1. Connect the USB device to the unit.
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Audio CD only)
2. Select a mode in which you want to record.
Play back a sound source first.
3. Start the recording by pressing X REC.
4. To stop recording, press Z STOP.
[All tracks/ files recording]
Record to USB in stop or play mode.
[Program list recording]
4
,,Note
yy You can check the recording percentage
rate for the USB record on the screen during
the recording. (Audio CD or MP3/ WMA CD
only)
After marking desired file(s) and you can record
it to USB.
It’ll be stored as follows.
Operating
Audio CD
MP3/ WMA
yy Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete file may be made and not
deleted on PC.
yy Recording through microphones is not
availabe.
yy If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
yy Multi card reader device or external HDD
can not be used for USB recording.
yy A file is recorded by 128 Mbyte (about 2
hours) when you record for a long term.
There are recorded less than 4 files.
yy When you stop recording during playback,
the file will not be stored.
yy In the state CD-G, DTS disc USB record is not
operated.
The other
sources (Tuner,
Portable)
yy The files in the sub-folders are not recorded
during all track recording.
yy You may not record more than 999 files.
yy The nunbering of the recording file is
entered from the lowest number. So if you
delete some of the recording files, the next
recording file could be the lowest number
among them.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
DM2740-CB_DAUSLLK_ENG.indd 32
2014-04-14
4:44:14
Operating 33
Using a Bluetooth®
wireless technology
About Bluetooth
Bluetooth is wireless communication technology
for short range connection.
The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.
Connecting individual devices under
Bluetooth® wireless technology does not incur any
charges. A mobile phone with
Bluetooth® wireless technology can be operated
via the Cascade if the connection was made via
Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the P
RADIO&INPUT.
“BT READY” appears in the display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit appears as “LG MICRO(XX:XX)”.
,,Note
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “LG MICRO
(F7:08)” on your Bluetooth device.
3. Enter the PIN code.
PIN code : 0000
4
Operating
Bluetooth Profiles
Listening to music of a
Bluetooth device
4. When this unit successfully paired with your
Bluetooth device, Bluetooth LED of this unit
lights up and appears “BT PAIRED”.
,,Note
Depending on the Bluetooth device type,
some device have a different pairing way.
5. Listening to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
DM2740-CB_DAUSLLK_ENG.indd 33
2014-04-14
4:44:14
34 Operating
,,Note
yy When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible.
However it may not work well in the case
below :
-- There is a obstacle between the unit and
the bluetooth device.
-- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device
to this unit again when you restart it.
yy The sound may be interrupted when
same frequency devices is used by other
electronic equipment.
4
yy You cannot control the Bluetooth device
with this unit.
Operating
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy When not connected the Bluetooth,
“BLUETOOTH” and “BT READY” appears on
the control panel.
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yy The more distant between the unit and
the bluetooth device, the lower the sound
quality becomes.
yy When Bluetooth connection is
disconnected, connect the bluetooth device
to the unit again.
yy Bluetooth function will be converted, when
connected via Bluetooth or NFC. (REC action
is excluded.)
DM2740-CB_DAUSLLK_ENG.indd 34
2014-04-14
4:44:14
Operating 35
Pairing your unit and Bluetooth
device through NFC Tag
About NFC Tag
Connect to the Bluetooth by using the Bluetooth
devices that support NFC.
1. Activates the NFC feature of your NFC-enabled
phone.
,,Note
yy Please use a device which the NFC feature is
available.
yy NFC Recognition area may be different
depending on the type of Bluetooth device.
Please check the position of NFC recognition
area of the Bluetooth device before tagging.
2. Turn on the unit.
yy If the screen of the Bluetooth device is
locked, the device may not recognize the
NFC Tag.
3. Tag the back of your NFC-enabled phone over
the unit.
yy In some cases, the device may not recognize
the NFC.
-- When the case of the Bluetooth devices
is chrome-plated material.
-- Accordance to the material and
thickness of the case of Bluetooth
devices.
-- According to the performance of the
NFC of the Bluetooth devices.
yy You can disconnect the device by tagging
again while connected to Bluetooth. Do
not place the Bluetooth device on NFC Tag
Location after connecting to a Bluetooth
device.
4
Operating
yy Only available on Android devices with Jelly
Bean (4.1.2 Version) or higher.
yy Depending on the Bluetooth device type,
some device have a different pairing way.
4. Enter the PIN code.
PIN code : 0000
5. Displayed on the unit if Bluetooth pairing is
successful.
6. You can listen to music played on this unit using
your Bluetooth device.
DM2740-CB_DAUSLLK_ENG.indd 35
2014-04-14
4:44:14
36 Troubleshooting
Troubleshooting
PROBLEM
No power
No picture
CORRECTION
Plug the power cord into the wall outlet securely.
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
Connect the video cables securely to both the TV and unit.
Select the correct input mode of the unit so you can hear the sound
from the unit.
There is little or no sound
Connect the audio cables into the connection terminals correctly.
Replace with a new audio cable.
The DVD picture quality is poor
Clean the disc using a soft cloth with outward strokes.
Insert a disc.
A DVD/CD will not play
Insert a playable disc (check the disc type, colour system and
regional code).
Enter your password or change the rating level.
5
Humming noise heard while a DVD
or CD is playing
Clean the disc using a soft cloth with outward strokes.
Move unit and audio components further away from your TV.
Troubleshooting
Check the antenna connection and adjust its position.
Radio stations can’t be tuned in
properly
Attach an external aerial if necessary.
Tune to the station manually.
Preset some radio stations, see page 30 for details.
The remote is not pointed directly at the unit.
Point the remote directly at the unit.
The remote is too far from the unit.
Use the remote within 7m of the unit.
The remote control doesn’t work
well / at all
There is an obstacle in the path between the remote control and
the unit.
Remove the obstacle.
The battery in the remote control are flat.
Replace the battery with new ones.
DM2740-CB_DAUSLLK_ENG.indd 36
2014-04-14
4:44:15
6Appendix
Appendix 37
Area Code List
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
AF Fiji Afghanistan FJ Monaco MC Singapore SG
SK
Argentina AR Finland FI Mongolia MN Slovak Republic Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
SI
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
Vietnam RU Zimbabwe SA
VN
ZW
6
SN
Appendix
DM2740-CB_DAUSLLK_ENG.indd 37
LY Russian
LU Federation TH
2014-04-14
4:44:15
38 Appendix
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
6
LanguageCode
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Ameharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
8387
8386
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili Aymara 6588
Guarani 7178
Moldavian 7779
Swedish Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru7865
Language Code
Basque 6985
Hebrew 7387
Nepali 7869
Tajik 8471
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Tamil 8465
Bhutani 6890
Hungarian 7285
Oriya 7982
Telugu 8469
Bihari 6672
Icelandic 7383
Panjabi 8065
Thai 8472
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Tonga 8479
7065
Turkish 8482
Appendix
Bulgarian 6671
Interlingua 7365
Persian Burmese 7789
Irish 7165
Polish 8076
Turkmen 8475
Byelorussian 6669
Italian 7384
Portuguese 8084
Twi 8487
Chinese 9072
Japanese 7465
Quechua 8185
Ukrainian 8575
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Urdu 8582
Czech 6783
Kashmiri 7583
Rumanian 8279
Uzbek 8590
Danish 6865
Kazakh 7575
Russian 8285
Vietnamese 8673
Dutch 7876
Kirghiz 7589
Samoan 8377
Volapük 8679
English 6978
Korean 7579
Sanskrit 8365
Welsh 6789
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Wolof 8779
Estonian 6984 Laothian Faroese 7079
Fiji 7074
Finnish 7073
DM2740-CB_DAUSLLK_ENG.indd 38
7679
Serbian 8382
Xhosa 8872
Latin 7665
Serbo-Croatian 8372
Yiddish 7473
Latvian, Lettish 7686
Shona 8378
Yoruba 8979
Lingala 7678
Zulu 9085
2014-04-14
4:44:15
Appendix 39
Trademarks and
Licenses
DivX Certified® to play DivX® video, including
premium content.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Covered by one or more of the following U.S.
patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
6
Appendix
DM2740-CB_DAUSLLK_ENG.indd 39
2014-04-14
4:44:19
40 Appendix
Specifications
General
Power requirements
Refer to the main label.
Power consumption
Refer to the main label.
Dimensions (W x H x D)
(135 x 295 x 315) mm
Net Weight (Approx.)
3.7 kg
Operating temperature
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity
5 % to 90 %
Inputs/ Outputs
VIDEO OUT
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
HDMI OUT (video/audio):
19 pin Type A, HDMI™ Connector
DIGITAL IN (OPTICAL):
3 V (p-p), Optical jack x 1
PORT. IN
0.6 Vrms (3.5 mm stereo jack)
System
6
Laser
Semiconductor laser, wavelength: 650 nm
Signal system
Standard NTSC/PAL color TV system
Frequency response
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)
Signal-to-noise ratio
More than 80 dB
Harmonic distortion
0.05 % at 1 W
Dynamic range
More than 85 dB
Bus Power Supply
5V01A
Appendix
Amplifier
Stereo mode
80 W + 80 W (4Ω at 1kHz)
Tuner
FM Tuning Range
DM2740-CB_DAUSLLK_ENG.indd 40
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
2014-04-14
4:44:19
Appendix
41
Front Speaker
Type
3 Way 4 speaker
Impedance
4Ω
Rated Input Power
80 W
Max. Input Power
160 W
Dimensions (W x H x D)
(126 X 295 X 315) mm
Net Weight
3.5 kg
yy Design and specifications are subject to change without notice.
6
Appendix
DM2740-CB_DAUSLLK_ENG.indd 41
2014-04-14
4:44:19
42 Appendix
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Maintaining the Unit
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
DM2740-CB_DAUSLLK_ENG.indd 42
2014-04-14
4:44:19
DM2740-CB_DAUSLLK_ENG.indd 43
2014-04-14
4:44:19
DM2740-CB_DAUSLLK_ENG.indd 44
2014-04-14
4:44:19
Download PDF