LH-CX247W NA2ALLS DVD/VCR COMBI RECEIVER Combi Receiver System OWNER'S MANUAL MODEL: LH-CX247 (Main Unit: LH-CX247W Speakers: LHS-CX247T, LHS-CX247W) CD-R/RW PAL G-CODE Before please connecting up, operating or repairing this read this instruction booklet carefully and R product, completely. CAUTION Warning: To reduce the risk of electric shock, do of this not remove There product. iceable the parts inside. Refer servicing qualified service Warning: To reduce the risk of fire electric uct to or back cover or are no user-serv- shock, do dripping to personnel. not expose this or prod- splashing water, rain, not place objects filled as vases, on the prod- or moisture. Do with water such CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS ECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. uct. SERIAL NUMBER: You can find the serial number on the back of the unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. ______________________________ ______________________________ Date of Purchase_________________________ Warning: This digital video disc player employs a laser system. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not open the enclosure. Visible laser radiation when open. Warning: Never stare laser beam. Warning: directly Caution: Do not install this confined space such similar unit. Notes on as a into the product book in a case or Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 2 .31-32 PlayingaDVDorVideoCD. GeneralFeatures.......................31 Contents . Introduction...................4 SymbolUsedinthisManual...............4 AbouttheSymbolDisplay..............4 NotesonDiscs..........................4 HandlingDiscs........................4 StoringDiscs.........................4 CleaningDiscs........................4 TypesofPlayableDiscs...................5 Regionalcode..........................5 Disc-relatedterms.......................6 FrontPanel.............................7 DisplayWindow.........................8 RemoteControl.........................9 RearPanel............................10 InstallationandSetup. . . . . . . . . .11 . . . . . . . . . . . MovingtoanotherTITLE...............31 .31 Moving to another CHAPTER/TRACK . . . . . Search.............................31 ChangingtheAudioChannel Still Picture and Frame-by-Frame Playback . . . . . . . . . . . . .31 .32 SlowMotion.........................32 Random............................32 RepeatA-B..........................32 Repeat.............................32 3DSurround.........................32 TimeSearch.........................32 Zoom..............................33 MarkerSearch.......................33 SpecialDVDFeatures...................33 TitleMenu..........................33 DiscMenu..........................33 ConnectingtoaTV.....................11 Accessory Audio/Video (A/V) Connections to CameraAngle.......................33 .33 ChangingtheAudioLanguage RadioAerialConnections................12 .34 PlayinganAudioCDorMP3/WMADisc AudioCDandMP3/WMADiscFeatures .35 Pause..............................35 DVD/VCRCombireceiver................12 SpeakerSystemConnection..............13 SpeakerPositioning.....................14 Mini Glossary for Audio Stream & Surroundmode.........................15 SoundMode...........................15 .16-20 BeforeOperation-VCRpart. .16 TuninginavideochannelonyourTV. .16 Using your receiver for the very first time . . . . . . . . . . . . . . . . . SettingtheclockManually................17 Tosetthecoloursystem.................17 Howtousethemainmenu..............18 .18 Tuning in TV stations Automatically .19 TuninginTVstationsManually. .20 ChangingtheorderofTVstations. . . . . . . . . . . . . . . . . . . . . . . . DeletingTVstations...................20 .21-25 BeforeOperation-DVDpart. On-ScreenDisplay......................21 InitialSettings.......................22-25 GeneralOperation....................22 . . . . . . . . . . . LANGUAGE.........................22 MenuLanguage....................22 .22 DiscAudio/Subtitle/Menu. DISPLAY...........................23 . . . . . . . . . AUDIO.............................23 5.1SpeakerSetup..................23 .23 DynamicRangeControl(DRC). . . . . . AutoPlay..........................24 DivX(R)VOD.......................24 LOCK(ParentalControl)................25 Rating............................25 .25 Password(SecurityCode). CountryCode......................25 . . . . . . . . . . Operation....................26 Playingatape.......................26-31 .26 CM(CommercialMessage)Skip. OPR (Optimum Picture Response) .26 .27 InstantTimerRecording(ITR). G-CODEProgramming..................28 Timer recording using On Screen Display .29 .30 IfTimerrecordeventsOverlap. .30 Change (Deleting) the Timer Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MovingtoanotherTrack................35 RepeatTrack/All/Off...................35 Search.............................35 Random............................35 RepeatA-B..........................35 3DSurround.........................35 ProgrammedPlayback.....................36 .36 RepeatProgrammedTracks. .36 ErasingaTrackfromProgramList .36 Erasing the Complete Program List ViewingaJPEGDisc......................37 . . . . . . . . . . . . . . . . . . . . . . . . . SlideShow..........................37 StillPicture..........................37 MovingtoanotherFile.................37 Zoom..............................37 Torotatepicture......................37 To listen to MP3/WMA music watching picture .37 SpeakerSetup.........................38 .39 PlayingaDVDVRformatDisc. . . . . . . . . . . . . . MaintenanceandService.................39 PlayingaDivXMovieDisc................40 Additional Features-VCR part . . . . . . . . . .41-42 . OnScreenDisplay....................41 TapeCounterMemoryStop.............41 .41 VideoDoctor(Self-Diagnosis). Hi-FiStereoSoundSystem.............42 . . . . . . . . . . AdditionalFeatures.....................43 LastSceneMemory...................43 ScreenSaver........................43 VideoModeSetting...................43 CopyingfromDVDtoVCR................44 .44 Recording from another video recorder RadioOperation........................45 .45 PresettingtheRadioStations ListeningtotheRadio..................45 . . . . . . . . ToCleartheStoredRadioStations . . . . . . . . . . . .45 .46 .46 Mute...............................46 TuningintoaStationManually Tuning into a Station Automatically . . . . Vocal.............................23 OTHERS...........................24 PBC.............................24 . . . TVAspect.........................23 DisplayMode......................23 ProgressiveScan...................23 . . Subtitles............................33 . . . . . . . . . . . . . . . . . . . . . . . Reference....................47 LanguageCodes.......................47 CountryCodes.........................47 Troubleshooting.....................48-49 Specification........................50-51 3 Introduction About the To proper use of this product, please read this owner's manual carefully and retain for future Symbol Display ensure reference. " " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service on that specific DVD video disc. Notes on Discs location. Symbol Handling Used in this Manual The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of Discs Do not touch the the disc on by the playback side of the disc. Hold edges so that fingerprints do not get the surface. Never stick paper or tape on the disc. electric shock. The exclamation point alerts you to the presimportant operating and maintenance servicing instructions. ence / of Storing Discs playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. After Indicates hazards unit itself or likely to cause harm to the other material damage. Note: Indicates special notes and operating features. Tip: Indicates tips and hints for A section whose title has is applicable only making the task easier. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. of the following symbols represented by the sym- one to the disc bol. DVD DVD and finalized DVD±R/RW VCD Video CDs CD Audio CDs MP3 MP3 Discs WMA Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static WMA Discs spray intended for older JPEG JPEG Discs DivX DivX Discs Setting the vinyl records. Output Source You must select one of your output VCR) to view on the TV screen. sources (DVD or If you want to view output source of DVD deck: Press DVD on the remote or DVD/VCR on the front panel until DVD indicator on the front panel lights and output source of DVD deck is viewed on the TV screen. ? If you want to view output source of VCR deck: Press VCR on the remote or DVD/VCR on the front panel until VCR indicator on the front panel lights and output source of VCR deck is viewed on the TV screen. ? 4 Types of Playable Discs Regional code This DVD player is designed and manufacplayback of region "4" encoded DVD software. This unit can play only DVD discs DVD tured for (8cm/12cmdisc) labeled "4" Video CD (VCD) (8cm/12cmdisc) Notes Audio CD ? (8cm/12cmdisc) In addition, this unit plays on or "ALL". Regional clearly a globe visible on with the one or more cover. This number must match your DVD al code or the disc cannot play. DivX file, DVD -R, DVD +R, and/or JPEG files. Codes Most DVD discs have numbers in it DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and CD-R / CD-RW that contains audio titles, MP3, WMA, ? 4 player's region- If you try to play a DVD with a different region code from your player, the message "Check Regional Code" appears on the TV screen. Notes: ? Depending on the conditions of the ment or the CD-R/RW (or recording equip- DVD -R, DVD +R, DVD - RW, DVD +RW) disc itself, some CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot be ? ? played on the unit. Do not attach any seal or label to either side labeled side or the recorded side) of a disc. (the irregularly shaped CDs (e.g., heartoctagonal) since they may result in Do not use shaped or malfunctions. Notes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally programmed by software manufacturers. This unit plays DVDs and Video CDs according to disc content manufacturer, therefore designed by the software playback features may some not be available or other functions may be added. Manufactured under license from Dolby Laboratories. Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. "Dolby", "Pro Manufactured under license from Digital Theater Inc. US Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 and other US and Systems, world-wide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Digital Theater Theater Systems, Systems, Inc. Copyright 1996, 2003 rights reserved. Inc. All 5 PBC: Playback Control (Video CD only) Playback control is available for Video CD (VCD) Disc-related terms DVD±R/DVD±RW DVD -R and DVD +R are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc DVD +RW and DVD -RW once. re-writable media, are only two standards for meaning the DVD content can be Single-sided discs can hold erased and re-recorded. 4.38 Gigabytes much. There and double-sided discs hold twice are no dual layer single sided recordable (Video CD) with quality CDs. Title (DVD video discs only) generally a distinct section of a DVD disc. For example the main feature could be title 1, a documentary describing how the film was made could be title 2, A title is and cast interviews could be title 3. Each title is A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB disc) of MPEG-1 full-motion video along typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) operate in the same way as audio as discs. VCD version 2.0 disc formats. PBC allows you to interact with the system via menus, search functions, or other stereo sound. MPEG assigned easily. an international standard for video and audio compression. MPEG-1 is used in encoding video for VCD and provides for multichannel surround sound coding such as PCM, Dolby Digital, DTS and MPEG audio. enabling Chapter (DVD video discs only) chapter is a segment of a title such film popular compression format used for digital files that yields very high near-CD quality. WMA Windows media audio file. A type of developed by Microsoft Corp. coding / decoding a series. Each as a scene in a is may not be recorded. On a interview in you to locate it chapter assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters or one Scene MP3 audio reference number A MPEG is MP3 is a (VCD) video CD with PBC (playback control) functions, pictures are divided into sections called "scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want. A scene is composed of one or several tracks. a moving pictures and still Track JPEG Expert Group. JPEG is a compressed that allows you to save images with no limit Joint Pictures file format on the number of colors. track of video DivX is the name which is based on of a the revolutionary new MPEG-4 new video codec compression play DivX standard for video.You will be able to 6 as picture or sound track for a specific language (DVD), or a musical piece on a video or audio CD. Each track is assigned a track number, enabling you to locate the track you want. DVD discs allow one DivX movies A distinct element of audiovisual information, such the using this DVD/CD/VCR receiver. of audio. (with multiple angles) and several tracks Front Panel OPEN/CLOSE Opens or (Z) EJECT(Z) closes the disc tray. PAUSE/STEP(X/C) Remote Sensor Pause Point the DVD/VCR Combi receiver remote control here. Disc Press a of playback Tray (DVD deck) Insert the tape in the VCR deck. Ejects tape a repeatedly for disc in the DVD or VCR deck temporarily. or a STOP disc here. of Stops playback a disc PLAY To play back a Introducin frame-by-frame playback. recorded tape or or (x) tape. (B) disc. REC/ITR (z) normally or to Timer Recording. To record activate Instant Cassette FM/AM To change between AM Insert and FM bands. a Compartment (VCR deck) video cassette here. PROG./ PRESET Display window DVD/VCR (output select) Select one of your output sources to view on the TV screen between DVD and VCR. PROG./PRESET (+/-) through memorized channels or to control tracking during playing back a tape (VCR mode). To tune in the desired station (Radio Mode). To scan up or down INPUT SELECT Select the VCR deck's VIDEO IN/AUDIO IN source (Tuner, A1, A2 or AV3) (Left/Right) Connect the audio/video output of an external system, TV/Monitor, Another VCR). source Reverse SKIP/SCAN DVD: Go to (S/Q) of current chapter/track or to previous chapter/track. Press and hold for two seconds for a fast reverse search. VCR: Rewinds the tape during the STOP mode or for fast reverse picture search. beginning Forward SKIP/SCAN (R/T) Press and hold for two seconds for a fast forward search. VCR: Advances the tape during the STOP mode or for fast forward picture search. DVD: Go to NEXT chapter/track. VOLUME Control STANDBY/ON Switches the DVD/VCR Combi receiver ON and OFF. Turn the knob clockwise to increase volume, counterclockwise to decrease the volume. 7 Display Indicates current A disc is loaded in the DVD deck. audio stream. loaded in the DVD WMA disc inserted (Lights when a Window disc is deck.) DVD/VCR Combi receiver is in VCR timer mode Indicates the unit is radio mode. or a VCR timer recording is recording programmed. DVD to VCR copy is in progress. DVD/VCR Combi receiver is Indicates current surround mode. Recording a tape. Indicates the unit is playing back a tape recorded in Hi-Fi. MUTE indicator Programmed playback active A cassette is loaded in the VCR deck. DIGITAL PCM WMA PHOTO dts VCD ST II PROG PROLOGIC RADIO CHP/TRK Hi-Fi DVD MP3 TV RPTALLAB Total Indicates current track number chapter, or channel number. Indicates the unit is TV mode. MP3 disc inserted. Repeat playback mode indicators. VCD disc inserted. DVD disc inserted. Lights up when a JPEG disc inserted. 8 stereo broadcast is being received in radio mode. playing time/Elapsed time/ Frequency/remaining time/ Current deck status/Surround mode/Volume etc. indicators. Remote Control POWER OPEN/CLOSE, EJECT (Z) Opens and closes the disc tray. Switches DVD/VCR Combi receiver ON and OFF. 0-9 numerical buttons Selects numbered options in a menu. PROGRAM Accesses or removes Program menu. CLEAR Removes - Ejects the tape in the VCR deck. CD/DVD/VCR select buttons Select the output source (CD/DVD - EJECT OPEN/CLOSE POWER VCR) FM/AM VCR Select the DVD/VCR Combi receiver's tuner track number on the as on the AV Selects the VCR deck's menu. Press to clear preset stations from the tuner memory. - - AV PROGRAM CLEAR SOUND MODE AUDIO Select programme of VCR or Tuner Adjusts manually the tape's picture onscreen. (b/B): TUNING G-CODE DISPLAY CLK/CNT PR/TRK/PRESET SET UP/ i REC/ITR Records normally or Timer (z) DVD: Search backward*/go to beginning of current chapter or track or go to previous chapter or track. VCR: Rewinds the tape in STOP mode or for fast reverse picture search. *Press and hold button for about two seconds. FORWARD (>) - ENTER REC/ITR BACKWARD ANGLE REPEATA-B REPEAT TV/VCR Stops playback. CM SKIP SPEED TITLE ZOOM PLAY DVD camera (X) angle a radio stations frequency into Displays functions on the TV screen. Acknowledges menu selection. Accesses menu on a VOLUME DVD disc. (+/-) point during playback. menu. Momentarily silence the speaker of the DVD/VCR Combi receiver. TV/VCR Switch between your TV's tuner and the VCR's internal tuner. ZOOM Enlarges DVD video image. TITLE Displays the disc's Title RANDOM menu, if available. REPEAT A-B/SPEED/REPEAT PLAY (G) Starts playback. ANGLE a menu. Displays MARKER SEARCH S-TITLE Selects a subtitle language. MUTE FORWARD MUTE Selects setup SEARCH S-TITLE playback recording temporarily/press repeatedly for frame-by-frame playback. remove MARKER SEARCH or Enter Marks any MARKER Pause for Adjusts speaker volume. PR/TRK/PRESET VCR: Advances the tape in STOP mode or for fast forward picture search. *Press and hold button for about two seconds. STOP (A) PAUSE/STEP menu DISC MENU DISC MENU RETURN PAUSE/STEP forward*/go to next chapter or track. (CD). the tuner. - STOP DVD: Search source AV3). programming. SET UP/ i Access or TUNING+ OK MEMORY Recording. (.) audio channel - TUNING- activates Instant BACKWARD or OK/MEMORY/ENTER RETURN menu. AV2 SOUND MODE Selects sound mode between BYPASS, PRO LOGIC, PRO LOGICII (MOVIE, MUSIC, MATRIX) and 3D SURROUND. AUDIO Selects an audio language (DVD) or an G-CODE To tune in the desired radio station. Removes the setup listening choice. (FM and AM bands) G-CODE To display the programme PR/TRK/PRESET(v/V): - the (Tuner, AV1, DISPLAY, CLK/CNT Accesses On-Screen display. Switches among the clock, tape counter and tape remaining modes on the display. b/B/v/V (left/right/up/down) Selects an option in the menu. Introducin FM/AM Tuner select button CD/DVD program menu or a mark MARKER SEARCH a or to view on the TV screen. - - - if Repeat chapter, track, title, all. Repeats sequence. Selects recording speed. available. CM SKIP Fast forwards Play picture search through 30 seconds of recording. RANDOM tracks in random order. Note This remote control To use To use use the same buttons for VCR and DVD functions (ex. PLAY). VCR, first press the VCR button. the DVD, first press the CD/DVD button. the 9 Rear Panel AC Power Cord Plug into the power source. ANT.IN COMPONENT/PROGRESSIVE SCAN VIDEO OUT Connect to Pr) inputs. TV with Y Pb Pr a Connect the aerial using this jack. Pb (Y RF. OUT Connect to a TV with RF cable. DVD/VCR OUT VIDEO OUT/AUDIO OUT FM ANTENNA CONNECTOR (Left/Right)) Connect the FM antenna to this Connect to a TV with video and audio terminal. inputs. VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, another VCR). S-VIDEO OUT Connect to a S-Video (DVD OUT) Input on TV. FOR DVD VIEWING ONLY. SPEAKER CONNECTORS Connect the six supplied speakers to these terminals. AM ANTENNA CONNECTORS Connect the AM antenna to this terminal. Do not touch the inner Electrostatic discharge Remote Control of the pins may cause jacks on the rear Point the remote control at the remote sensor to the unit. Remote control Operation Range press the buttons. Distance: About 6m panel. permanent damage and battery Detach the battery cover on the rear of the remote control, and insert two (20ft) from the front of the AAA AAA R03 remote sensor Angle: installation (size AAA) batteries aligned correctly. with and About 30° in each direction of the front of the remote sensor Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 10 Installation and Tips Depending Setup your TV and other equipment you wish to connect, there are various ways you could connect the unit. Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. Caution Connect the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable. (C) 2. Connect the Left and Right AUDIO OUT jacks of this unit's DVD/VCR OUT to the audio left/right in jacks on the TV using the audio cables. (A) Notes: Set the Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel. Do not connect this unit's AUDIO OUT jack to the in jack (record deck) of your audio system. phono to a TV Connecting Make one of the following connections, depending the capabilities of your existing equipment. on When using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, set TV's INPUT to COMPONENT VIDEO. When using the S-VIDEO OUT jack, set the TV' INPUT to S-VIDEO. Basic connection 1. 1. on s on on this unit's DVD/VCR the TV using the video InstaliodSeup Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window. 2) (AV) Connect the VIDEO jack OUT to the video in jack Progressive to "On" on the setup menu for progressive signal, see page 23. Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Press STOP and hold it for five seconds before releasing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack) or S-VIDEO connection. Rear of this unit (DVD exclusive out connection) cable.(V) 2. Connect the Left and Right AUDIO jacks of this unit's DVD/VCR OUT to the audio left/right in jacks on the TV using the audio cables. (A) Basic connection (RF) 1. Connect the antenna cable from your indoor/ outdoor antenna to ANT.IN jack on the rear panel of this unit. 2. Connect the supplied RF antenna cable from the RF.OUT jack on the rear panel of this unit to your television's Antenna Input. (R) Component (for DVD) 1. 2. Video ) S connection Rear of TV Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the unit to the corresponding in jacks on the TV using an Y Pb Pr cable. (C) COMPONENT/PROGRESSIVE VIDEO INPUT AUDIO INPUT SCAN VIDEO INPUT Pr Connect the Left and Right AUDIO OUT jacks of this unit's DVD/VCR OUT to the audio left/right in jacks on the TV using the audio cables. (A) S-Video connection 1. (Color Stream C Pb Y S-VIDEO INPUT ANTENNA INPUT R A V (for DVD) R Connect the S-VIDEO OUT jack on this unit to the S-Video in jack on the TV using the S-Video cable. (S) 2. Connect the Left and Right AUDIO OUT jacks of this unit's DVD/VCR OUT to the audio left/right in jacks on the TV using the audio cables. (A) Progressive Scan (ColorStream Pro) If your television is connection high-definition "digital ready" television, you may take advantage of the DVD Player's progressive scan output for the highest video resolution possible. a or If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the unit. Rear of this unit (Basic connection) Note: If the TV has an S-video input, connect the DVD player with the S-video cable. When using an S-video cable, do not connect the yellow video cable. 11 Accessory Audio/Video (A/V) Connections to DVD/VCR Combi receiver Connect the AV 3 jacks on the DVD/VCR Combi receiver to the audio/video out jacks on your accessory component, using the optional audio/video cables. Accessory Device Jack Panel Front of this unit VIDEO OUTPUT AUDIO OUTPUT R L OR Rear of this unit Radio Aerial Connections Connect the ? ? supplied FM/AM loop aerial Connect the AM aerial for listening to the radio. to the AM aerial connector. Connect he FM wire aerial to the FM aerial connector. FM Wire aerial AM (supplied) Loop aerial (supplied) Notes To prevent noise ? Be ? 12 pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components. fully extend the FM wire aerial. After connecting the FM wire aerial, keep it as horizontal as possible. ? sure to Speaker System Connection Connect the speakers using To obtain the best possible the supplied speaker surround sound, cords. adjust the speaker parameters; distance, level, Front Speaker (Right) etc.. Front Centre Speaker (Left) Speaker InstaliodSeup Subwoofer Rear Speaker (Right Surround) Rear Speaker (Left Surround) Notes ? Be sure to match the speaker cable to the appropriate terminal the components: on + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. ? If you front use speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. ? Do not remove the front of cover supplied speaker. About Ferrite Core Be to attach the ferrite core to the sure (for connecting This ferrite to this core can cables 1 unit). reduce noises. How to attach the ferrite 1. Push the speaker a core stopper [a] of the ferrite a 2 core to open. A B 2. Wind the Subwoofer cable three times on the ferrite core Wind the Subwoofer cable (A). ferrite core once on the Make the (B). 3. Pass the others as straight on the ferrite core (B). short length here possible. as 3 A 4. Close the ferrite core until it clicks. Notes ? Take care ferrite ? not to pinch the speaker cables between the B cores. Attach the ferrite core near the unit (Refer to the fig.3 and comment.). 13 Speaker Positioning In the of normal case position use the 6 speakers (2 front centre speakers, speaker, 2 rear speakers and subwoofer). If you want to a ? ? play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect subwoofer. Front speakers According to your listening position set up interval between speakers to 45 degree. Centre speaker speakers The centre and front speakers the speakers ideally are the for equal same distance. And height. But by hearing position normally place it above set up the or below the television. ? Rear speakers Place left and right for surround sound position ers a of case wall a or or ceiling smaller other, and set the ? playback. and install them at towards In the behind the rear listening These speakers above the level of the listener's to further room area. recreate sound motion and For best results, do not install the disperse speakers - 90 ears. atmosphere required listening direct the rear speak- too far behind the It is also effective to the sound. size, if the audience is above 60 speakers rear cm near to the rear wall set the rear than the listener's speakers opposite ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Speaker (Left) Front Speaker (Right) Rear Speaker (Right) Speaker (Left) Speaker Positioning Example 14 each Mini Glossary for Audio Stream 3D SURROUND This unit & Surround mode can produce instead of the five Allows you to enjoy 5.1(or 6) discrete channels of high a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. " Use this mode when nel which carries the effect of being effect with DOLBY in playing movie " " PRO LOGIC " Dolby Digital 2 chanmark. This mode provides the movie theatre a intensity which an can or or live concert house-an only be obtained through SURROUND. The effect (II) Dolby Logic II creates five full-bandwidth nels from two-channel sources. This is done output chan- using the any extracts spatial properties of the original recording without adding new sounds or speakers normally required to lis- works with DVD discs encoded with Dolby Pro Logic and Dolby Digital audio tracks. BYPASS Software with multichannel surround audio according signals is played to the way it was recorded. Sound Mode You can one of the enjoy surround sound simply by selecting pre-programmed sound fields according to the program you want to listen to. Press SOUND MODE repeatedly until the sound display window as mode you want appears in the below. Each time you press SOUND MODE button, the sound mode is changed in the following order; PRO LOGIC → → PL2 MOVIE 3D SURROUND → PL2 MUSIC → → PL2 MATRIX BYPASS When DVD is inserted. can change the stream of DVD (Dolby Digital, DTS, PCM, etc) by pressing the AUDIO button on the remote during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is You used. an advanced, high-purity matrix surround decoder that or more of the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynamic than before. Pro using 3D ten to multi-channel audio from a home theatre. This feature quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is 3D Surround effect, a Surround Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers tonal colorations. Each time you press AUDIO button, the sound mode of DVD changed as the following order; is →→→ MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. For your reference ? The Music mode is for and provides with any stereo music recordings, a wide and deep sound space. The Music mode use ? includes controls that allow the sound to be tailored to individual listening The DVD/VCR Combi receiver memorizes the last mode MUSIC mode: tastes. settings for each You identify individually. encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. can source the - MATRIX mode: - The Matrix mode is the same as the Music mode the directional enhancement to enhance mono logic is signals by making except that turned off. It may be used them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The reception may be simply to ultimate "cure" for poor FM stereo force the audio to mono. - Note ? When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). 15 Before Tuning in a Operation-VCR part video channel on your TV 6. Your TV receives recorder (VCR) signals a 8 ~ RF Make VCR 7. channel number usually Press PROG. that you have correctly installed your described earlier in this book. Turn 2. on 8. Select a TV channel number STANDBY/ON VCR and play tinue stages 3 4, instead of seeing video playback tune your TV until you see a bright blue ~ on when you have finished. Tune this channel so that watch video's. con- on which you wish to watch video's. Note Don't worry if you don't have a video-tape to stage! If you switch your VCR on and to select another video channel. can Insert a pre-recorded video tape into your VCR and press PLAY on the remote control. Select a TV channel number on which you wish to at this - ence appears. Store this channel your VCR. your TV. on + or also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a RCA lead. You so Press POWER to turn 68 You may select any channel number between 28 and 68. like another TV station. You sure as CHANNEL PSET R Press 1. the front of your VCR for the from the video dedicated video channel built into it, called AV. on screen. on your TV that you may watch video tapes. If you have used AUDIO and VIDEO cables then your TV should already have a have to select and tune it in - The The output frequency of this video recorder (VCR) is set at UHF channel 68. If channel 68 already used by another TV station, or if picture is distorted, you can change the transmitter channel of your VCR. Stages 5 will show you how to change the output frequency of your VCR. + or than 4 seconds. RF68 will appear in the display window. following picture will be displayed on the TV Notes is Press PROG. more Make sure on a the front of your VCR bright blue screen your TV. that you have correctly installed your successfully tuned in a dedicated on your TV. If you do not tune in a dedicated video channel on your TV you will be unable to view and record video tapes! video channel screen. 3. Tune this channel until the video picture is sharp and the sound is clear. If you have used a AUDIO and VIDEO cables you will not have to tune your TV, simply select the AV channel. The AV channel is optimum 4. video playback on already pre-tuned for your TV. Store this channel on your TV. You will need to look at the TV instruction book if you do not know how to do this. 5. time Following picture will display TV stations, To make tuning 3 to 4 shown "ACMS" as 1 be 4. Select a TV channel number on ~ displayed). the TV screen please follow stages (see p.18). ~ stages on when you have just connected your video recorder for the very first time. Only carry out stages 5 8 if you cannot obtain clear video playback as described in which you wish to watch video's. Make sure that your VCR is in standby pressing POWER on the remote control (only the clock will 16 Using your VCR for the very first ACMS Pr-12 ACMS Setting the clock Manually The clock in your VCR controls time and date settings for your VCR. 1. Press i. Press 1 or 2 to select TIME DATE. Press OK. To set the colour system 1. Press i. 2. The main 3. Press 1 or Press 3 or 4 4. menu will appear on the TV screen. 2 to select the SYSTEM and press OK. to select according to the COLOUR system used. HHMNDDMMYY :. - - -- -- -- --- . VCR REC TIME DATE Dr. E fOS ON OFF 2. Use the numbered buttons the remote control on HOURS, MINUTES, DAY, MONTH and to alter the 2 to select the RF AUDIO. Press 1 or YEAR. Press 3 or 4 Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. used. The day OPR of the week will appear 5. to select according to the RF AUDIO automatically when you enter the year. VCR REC E Dr. fOS ON OFF OPR HHMNDDMMYY 8 :. 00101 . THU 6. Press i to remove the menus from the TV screen. TIME DATE 3. If you make mistake press 1 a or 2 and enter the correct details. 4. Press i. 17 How to using This VCR the be easily displayed can menus The the main menus are Tuning menu programmed by using on screen. controlled from the Remote Control Handset. ing on your TV set and video recorder the POWER button. by press- Press i button. 2. The main on the TV problem please ING section 1. 2. will appear menu Automatically If the TV broadcast signal is weak your VCR may not detect the necessary information and will not be able to store them correctly. To overcome this Switch 1. in TV Stations on Press POWER to turn your VCR. on Press i button. The main screen. turn to the MANUAL TUN- page 19. Press 1 will appear on the TV 2 to select the ACMS. menu or screen. Press OK. VCR P SET R ON OFF Pr-12 SYS- TIME DATE ACMS TEM Dr. NIC fOSD OPR VCR 12 Pr-12 REC PSET R REC Timer recording setting (see p. 29). PR SET Manual tuning setting (see p. 19). ACMS ACMS (Automatic Channel Memory System) (see p. 18). TIME DATE Date & clock setting (see p. 17). SYSTEM To set the Colour TV System (see p. 17). Dr. To check a problem with your VCR (see p. 41). F.OSD ON/OFF To display the operational - TIME DATE SYSTEM Dr. Pr-12 NIC fOSD ON OFF OPR - - - O O O - ACMS - - Pr-12 ACMS 3. mode of your VCR O O OPR NIC - - Press OK (see p. 41). improve the playback picture (see p. 26). To To activate digital to start the automatic tuning 01 C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 deactivate the NICAM or sound again process. (see p. 42). S E Pr-12 ACMS Tip You can setup 3. change the menu language on the DVD (See the Menu Language on page 22.) menu. Press 1 and 2 to select the desired Press OK and press 3 4. Press "i" to return to a or 4 TV menu. 4. The TV STATION TABLE will appear when is complete. Press i to save picture. settings. 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 P SET R 18 your to select. PR-07 PR-08 MOVE : DELETE : , tuning in TV Stations Tuning In certain of the country broadcast areas 5. Manually Press 2 to select STATION your TV station. Press OK. The TV station signals may be too weak for your DVD/VCR Combi receiver's automatic tuning process to find or assign TV stations correctly. SEVEN PR C09 CH MFT C10 00 NINE TEN NBN GWN manually WIN PSET R Press i. The main Press 1 will appear on the TV 2 to select the PR SET. menu or list will appear. name SBS in order for your DVD/VCR Combi receiver to store them. 1. name ABC You must tune in these weaker broadcast stations that you may so 6. screen. Press 3 or 4 OK i to select a station name from the list. Press OK to select it. Press OK. If your station name isn't on InstaliodSeup the list do not press OK, but go to stage 7. PR 01 CH MFT STATION C02 00 PR-01 SBS ABC REC P SET R Pr-12 ACMS PR Dr. PSET R NIC fOSD ON OFF SEVEN VCR 12 CHANNEL/CABLE OKi OPR : PSET R AV C09 CH MFT C10 00 NINE TEN NBN i GWN WIN 2. Press i. PSET R The station table will appear. Press 3 or 4 to select the programme number that you want to tune (for example, PR 09). 01 C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PSET R 3. 7. : DELETE : change a TV station name manually using the "standard" names. Press 2. to select letters and numbers for Press 3 or 4 the station new Press 1 or 2 to name. move back and forth between characters. Press OK. OKi , can rather than PR-08 MOVE You OK i Press OK. Press AV to select C (Standard stations) or S PR C09 (Cable stations): C02 - C69, S01 - CH MFT STATION C10 00 ABC S41. Enter the channel number of station that you want P SET R OK i to tune with the numbered buttons or use 3 or 4 to find the required 8. station. Press i, confirm the station Press i again. Your new TV station has now placement. been tuned into your VCR. PR CH 09 C-- MFT -- If you wish to stages 1 8. STATION ---- manually tune other stations repeat - CHANNEL/CABLE : PSET R AV i 09 10 11 12 4. Searching will stop when it locates Press 2 to select MFT. Press 3 or 4 to station. 13 14 15 16 adjust. PSET R PR CH MFT 09 C10 00 ABC 00 -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- MOVE : DELETE : , OKi STATION CHANNEL/CABLE PSET R a C10 : AV i 19 the order of TV Stations Changing After TV stations into your DVD/VCR Combi change the order in tuning TV Stations Deleting After TV stations into your DVD/VCR Combi tuning receiver you may wish to receiver you may wish to delete a station. which The instructions they are stored without having to retune them against! The instructions given on this page will show you how you can simply move them into your desired order. 1. how 1. Press i. The main Press 1 Press i. The main Press 1 given on this page will show you delete any unwanted TV stations. easily will appear on the TV 2 to select the PR SET. menu or will appear on the TV 2 to select the PR SET. menu or screen. Press OK. screen. Press OK. PR CH MFT STATION 00 PR-01 01 VCR Pr-12 REC PR CH MFT STATION 00 PR-01 01 ACMS ON OFF Dr. CHANNEL/CABLE NIC fOSD : AV PSET R OPR VCR Pr-12 REC ACMS ON OFF 2. Dr. : AV 2. PSET R OPR Press 3 Press i. Press 3 or 4 or 4 to select the programme number (for example, PR 03) to select the programme number (for example, PR 03). move 02 C03 00 PR-02 03 C05 00 PR-03 04 C06 00 PR-04 05 C04 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 PSET R Press 3 Press i. you want to delete. you want to Press 2. 3. CHANNEL/CABLE NIC fOSD PR-08 : DELETE : or 4 C02 00 02 C03 00 PR-01 PR-02 03 PR-07 MOVE 01 04 C05 00 PR-04 05 C06 C07 00 PR-05 06 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 C03 00 PR-02 03 C05 00 PR-03 04 C06 00 PR-04 05 C04 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 PSET R 3. PR-07 PR-08 MOVE : DELETE : , Press 1. After a short while, the selected station will be deleted. PSET R , 02 to select the programme number you want to example, PR 05). 01 C02 00 PR-01 02 C03 00 03 C05 C06 00 PR-02 PR-04 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 04 move to 01 C02 00 PR-01 02 C03 00 PR-02 04 C06 00 PR-04 05 06 C04 C07 00 00 PR-05 PR-06 07 C08 00 08 C09 00 (for PR-07 PR-08 MOVE DELETE P R SET : : , 05 4. Press i to remove the menus from the TV If you wish to delete other TV stations stages 1 3. PSET R screen. repeat - 4. Press OK. The selected programme will be moved to the new programme number. If you wish to C02 00 02 C03 00 PR-02 04 C04 00 PR-04 05 other TV stations repeat stages 1 4. Press i to remove the menus from the TV screen. move 01 - PR-01 C07 00 PR-05 06 C08 00 PR-06 07 C09 C10 00 00 PR-07 PR-08 08 MOVE: DELETE PSET R 01 C02 00 PR-01 02 C03 00 03 C05 C06 00 04 00 PR-02 PR-03 PR-04 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 P SET R MOVE : DELETE : , How to selecting Stored TV stations ways. Press + or - : , Stored TV stations: can be selected in either of two to select different stations that are tuned into your DVD/VCR Combi receiver. You may also directly select stations numbered buttons 20 on using the remote control. the Before Operation-DVD part On-Screen You general playback status on the TV can be changed using the menu. on-screen display: display can the use the 1. Press DISPLAY 2. Press v / V to select Press b / B to an highlighted. change the inputting the title setting. You can appropriate (e.g. For number). press ENTER to execute the Selection Method 1/3 b / B, Numbers ENTER (or PBC mode) item. the number buttons if use Items Track Number during playback. The selected item is 3. Example: On-Screen Display during playing VCD Some items screen. To Display also Time search 0:20:09 Audio Channel STEREO Numbers ENTER b/Bor AUDIO InstaliodSeup functions, some Sound setting. 3D SUR b/B Notes: ? ? Some discs may not shown below. If no provide all of the features button is screen pressed for 10 seconds, display disappears. the Example: On-Screen Display during playing divx movie disc on- Items Selection Method Track Number Playback 1/3 A-B 1/9 Repeat title Repeat sequence Enter Marker MARKER SEARCH 123456789 a Time search language Digital Audio Output mode Action play prohibited MP3 Numbers, ENTER b/Bor AUDIO menu from this or 1 and Subtitle language Resume 0:20:09 Audio Marker Search B, Numbers ENTER Status/Restrictions TITLE b / ABC ENG point Sound not available 3D SUR b/Bor S-TITLE b/B Example: On-Screen Display during playing DVD Video Selection Method Items Title Number Chapter 1/3 Number 1/12 Angle Sound b / B, Numbers ENTER 0:20:09 Audio language and Digital Audio Numbers, ENTER b/Bor AUDIO mode Subtitle language B, Numbers ENTER Time search Output b / ABC 1 ENG b/Bor S-TITLE 1/3 b/Bor ANGLE 3D SUR b/B 21 Initial LANGUAGE Settings LANGUAGE By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 22 to 25. To display the menu. SETUP will take you back to initial To go back to the on previous move alternate 22 menu appears. option the selected item, move as well as option then to the third level. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items additional steps. Press SETUP or Menu Language Select a for the language PLAY to exit the Original: Refers to the disc recorded. was Setup menu and on-screen DVD Setup menu. original language Other: To select another according chapter. reference press CLEAR. to the If you track in which the language, press number corresponding 4-digit language code list in the enter the wrong language code, buttons then ENTER to enter the number Use v / V to select the second desired press B to 5. Setup setting for setting(s). Select language you prefer for the audio (disc audio), subtitles, and the disc menu. then press to the second level. The screen shows the current Move Select the Use v / V to select the desired require Original Disc Audio / Subtitle / Menu Operation 2. 4. Off Disc Menu display. level: Press SETUP. The 3. Disc Subtitle A second press of the remote control. 1. B to Original screen. To go to the next level: Press B on the remote control. General English Language Disc Audio and exit the Menu: display Press SETUP to Press b Menu DISPLAY 5. Pressing scan DISPLAY TV 16 Aspect Display Mode Progressive Scan : ENTER will set this unit to Progressive mode. 9Wide Widescreen Caution: Off Once the setting for progressive scan output is entered, image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to an Move TV : Select Select when Press STOP and hold it for five seconds before releas- 2) DVD Aspect 4:3 On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window. a ing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. standard 4:3 TV is connected. InstaliodSeup 16:9 Wide: Select when a 16:9 wide TV is connected. Display Display Mode AUDIO DVD Mode setting works only when the TV Aspect LetterBox: Each DVD disc has upper and Displays a wide picture with lower portions of the screen. Panscan: Automatically displays bands on the audio system you use. AUDIO 5.1 the entire screen Progressive and cuts off the the wide portions picture on that do not fit. progressive scan: Connect component out of this unit to the input of your monitor/television, set your television or monitor to Component Input. 1. Select Select Speaker Setup DRC On Vocal On Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. To turn On a variety of audio output options. options according to the type of Set this unit AUDIO mode is set to "4:3". "Progressive Scan" on the DISPLAY menu Speaker Setup DVD speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 37.) Select Aspect Mode Progressive Scan Control (DRC) DVD DivX With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). DISPLAY Display Select 5.1 Dynamic Range then press B. TV Move On This allows you to listen to a movie at a lower volume losing clarity of sound. Set DRC to On for this Off without effect. Vocal Prev. 2. Select "On" using Move Enter the v / V buttons. DVD Set to On playing. only when a multi-channel karaoke DVD is The karaoke channels on the disc mix into normal stereo sound. 3. Press ENTER to confirm your selection. The confirm menu will appear. Note: If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. 4. When the confirm menu appears on your screen Cancel is highlighted as default. Use the b button to highlight Enter. 23 OTHERS DivX(R) The PBC, Auto Play and DivX(R) VOD settings can be changed. VOD DivX can display the DivX DRM (Digital Rights Management) Registration code for your unit only. You OTHERS PBC Auto On DivX(R) DivX(R) Off Play Your Select VOD Video On Demand registration To learn code is more : XXXXXXXX visit www.divx.com/vod Move PBC Set (Done) Select Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an The VCD Playback Control (PBC) On: Video CDs with PBC to On or Off. encrypt are played according are played to the PBC. Off: Video CDs with PBC the same way as Audio CDs. Auto Play move Notes: If you rent the DivX VOD file, it has several limits as shown below. ? Display Play View play can watch the file. player will longest playback time and automatically. On: Auto Play function is active. Off: Auto Play function is not active. VOD Rental Do you want to mode is set to On, this DVD back the title DivX(R) This rental has 3 views left. use one of your 3 views now? search for title that has the then the number which you DVD can If Auto (Yes) (No) ? The rental has been expired. Notes: The Auto Play function may not work for some DVDs. Rental Expired (Done) ? Display the authorization error. Authorization Error This player is not authorized to play this video. (Done) 24 options viewing set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. You file. of LOCK Password (Parental Control) You LOCK Unlock Rating Password Country (Security Code) enter or New 2. Follow step "New" is Move Input Select Some movies contain that may not be suitable of these discs contain scenes Many parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer suitable more scenes as an If you or 4-digit code, verify. then press ENTER. to forget your Security Code 1. 2. Press SETUP to Input the display the can Setup clear it InstaliodSeup menu. number "210499" and the 6-digit using security code is cleared. parental control feature allows you to block rating you input, there to scenes below the 3. your children from being able to view material you believe is unsuitable. "Rating" on the LOCK menu Country are code as described above. Code DVD country/area whose standards used to rate the DVD video disc, based list in the reference chapter. were Rating, Password and Country Code features, you must input the 4-digit security code you created. If you have not yet entered a security code you a new Enter the code of the then press B. 2. To access the Enter by preventing 1. Select new again If you forget your security code you the following steps: alternative. access (Rating). "Change" 4. Press SETUP to exit the menu. DVD for children to view. The it 2 as shown left highlighted. 3. Enter the Rating change password. 1. Select Password on the LOCK menu then press B. AU Code can prompted to do so. Input 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. a 1. Select "Country Code" on the LOCK on menu the then press B. 2. Follow step 2 3. Select the first character 4. Shift the as cursor shown left (Rating). using v / V buttons. using B button and select using v / V buttons. the second character 3. Select a rating from 1 to 8 using the v / V buttons. 5. Rating 1-8: tions and Rating one (1) rating eight (8) is has the most restric- Press ENTER to confirm your country code selection. the least restrictive. Unlock If you select unlock, parental control is not active and the disc plays in full. Notes: If you set the same scenes rating for the player, all disc scenes with rating or lower are played. Higher rated are not played unless an alternate scene is available a on the disc. The alternative must have the rating or a lower one. If no suitable alternative found, playback stops. You must enter the 4-digit password or change the rating level in order to play same is the disc. 4. Press ENTER to confirm your rating press SETUP to exit the menu. selection, then 25 Operation You Tape Playing a You will be able to load and only eject video cassettes when your DVD/VCR Combi receiver is plugged into the mains. Your DVD/VCR Combi receiver may also playback recordings from NTSC tapes (on PAL TV). Getting a better picture When a cassette is inserted and playback started, the automatic tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press 3 or 4 on the remote control or on the front panel to manually press PROG. + or adjust the tracking until any distortions have been can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) To switch off the slow motion and shuttle, press the desired function. During appear slow motion and shuttle, the noise bars may on the picture according to the status of tape. If distortions can them with D or be 6. Press STOP to end - removed. Press numbered 0 switch automatic on back tracking 1. Make sure that you have the remote control to on again. connected your described earlier in correctly DVD/VCR Combi receiver as this book. on your TV. Press POWER to turn on your DVD/VCR Combi receiver. Insert the video cassette Turn into your DVD/VCR Combi receiver. The video casfacing up and sette should have the window side the arrow facing away from you. 2. Press PLAY to start playing reduce playback. Press EJECT. If the end of the tape is reached, your DVD/VCR Combi receiver will stop playback automatically, rewind, stop, eject the tape. CM (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then resume normal playback. While tape is playing press CM SKIP on the remote control to skip commercial (or another programme material). Repeatedly press CM SKIP to skip: 3 Press 90 seconds 4 Press 120 seconds 5 Press 150 seconds AUTO TRACKING 6 Press 180 seconds Your VCR will automatically adjust picture quality. the tracking to OPR a picture. repeatedly to advance (Optimum Picture Response) automatically improves playback picture quality by adjusting your DVD/VCR Combi receiver to This feature 3. Press PAUSE/STEP to still Press PAUSE/STEP picture, 2 Press 60 seconds If you load a record protection tab removed, playback of the cassette will start automatically. the best in the 1 Press 30 seconds your tape. video cassette which has had its give seen E. the tape frame by frame. If you press FORWARD, the picture will be slowed the condition of the tape. 1. Press i. down at about 1/19 times the normal for up to 5 minutes. After 5 minutes your DVD/VCR Combi receiver will stop the tape to prevent damaging the tape playback. Tapes or ity can be paused 2. Press 1 or 2 to select OPR. 3. Press OK. your DVD/VCR Combi receiver. Still picture qualcan be improved slightly by pressing 3 or 4. 4. Press PLAY to continue playing your tape. VCR 12 12 Picture search: MS back press either FORWARD or BACKWARD and this will enable you to rapidly wind the tape (7 times normal playback) and see ON OFF During playing where you are on the tape. Logic search: During fast forwarding FORWARD played or 5. Slow motion During playing 26 3 rewinding press and hold picture will be normal playback speed. : press F or G. i repeatedly Please note you may or playback, Shuttle back or still picture or 4 OPR OPR to select: OFF, SOFT SHARP. playing BACKWARD the back at 7 times 4. Press Dr. C f a only tape. 5. Press i return to screen. set OPR when or Instant Timer 5. Recording (ITR) Play. SP will produce improved picture and quality, however LP will provide twice recording time as SP. Your DVD/VCR Combi receiver allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR) start recording a set period of time or until the for immediately video cassette runs 6. incorporates Long which enables you to record up to twice the amount of time on a video cassette. For examE-180 will record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be an in slight loss using LP. picture Press REC/ITR to start and sound quality 7. Make Press PAUSE/STEP to avoid when Press POWER to turn on your DVD/VCR Combi receiver. video cassette with protection tab into your DVD/VCR Combi receiver. The video cassette should have the window side facing 3. up and the arrow facing away from you. Press PR 3 or 4 to select the programme number you wish to record. You may also directly select programme number using the numbered buttons on the remote control. 4. unwanted recording. pause mode and ITR is cancelled. Tapes can be paused for up to 5 minutes; RECP displayed when 8. Press STOP to end recording. EJECT will appear on recording from AUDIO (VCR IN AV1) terminals L/R on (VCR the IN rear AV1)/ a few cassette. It is possible to record on a video cassette protection tab removed by covering watching VIDEO for If you do not wish to record on a tape (this can happen quite easily by accident!) remove the protection tab on the back edge of the video (L(MONO)/R)/ VIDEO AV 1 for screen Notes: with self adhesive press AV until the socket you wish to record from is displayed. the TV seconds. If you wish to record directly from the AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN repeatedly tape is paused. After 5 Press EJECT. record IN terminals a minutes your DVD/VCR Combi receiver will stop recording to prevent damaging the tape or your DVD/VCR Combi receiver. sure a recording If you press PAUSE/STEP during ITR, this DVD/VCR Combi receiver will enter the record that you have correctly connected your DVD/VCR Combi receiver as described earlier in Insert much recording. Press PAUSE/STEP to continue this book. 2. sound as scenes. will be 1. or press will increase the record time by 30 minutes until you reach a maximum of 9 hours. Play (LP) a Long Play RECORD will appear on the TV screen. Press REC/ITR several times. Each successive out. Your DVD/VCR Combi receiver ple Press SPEED if you wish to record in Standard with the the hole tape. Remember you can record one programme while another by starting your instant recording, press TV/VCR to appear TV indicator in the display window and then selecting a different channel on your TV. of your unit. AV 2 for recording from AUDIO IN VIDEO IN terminals on (L(MONO)/R)/ the front of your unit. 27 G-CODE Programming PR G-CODE greatly simplifies entering the date, channel, start and end times of a Timer Recording by simply entering a G-CODE. GCODES are published in most TV guide magazines; they can vary one to nine numbers in length. 6. Press F or to revise. G-CODE is a registered trademark Development Corporation. of Gemstar Press D Make sure TIME 12 10 :: 111155 SP :: SP ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- or 2. a protection -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP settings that SP). PR DATE PR-01 12 -- -- -- TIME -- -- -- -- -- -- -- -- -- -- -- -- -- -- 10 -- SP :: 11 11 ~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- SP -- SP -- SP -- SP -- SP -- SP tab into your VCR. Press G-CODE. 7. Press G to select the Press D IP, or or recording speed. E to select the desired -------- Check that the timer event details ONCE 0~9, REC PR or E to select the ONCE: To record recording type. time every week. (except Saturday and same DAILY: To record every day Sunday) at the same time. 4. DATE PR-01 once. WEEKLY: To record at the tape is left and speed from SP to LP, if necessary, to complete recording the program. switches G-CODE NO. Press D tape speed (SP, LP). IP mode determines how much 3. 12 are 8. record. If you make a mistake press F then enter the revised number. TIME 10 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: 111155 ~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP Press i to save your settings. If PLEASE CHECK is displayed, you have entered incorrect information and will need to re-enter the data. If you want to make another G-CODE 2 8. repeat stages Press i to 24687654 0~9, The recording details of your displayed. If "- -" is displayed tion "PR", press Press F press numbered buttons programme will be on the channel posi"- -" or G to select or D or E to select the , then channel position you wish to record manually. If PLEASE CHECK is displayed it means that you have entered the wrong G-CODE numbers, entered the G-CODE numbers incorrectly or the G-CODE programming number has been printed incorrectly in the TV guide. If you wish to record from AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/ VIDEO IN from the back or on the front of your unit, press AV to select for correct disor the menus. AV2). Press POWER to timer recording standby mode, press POWER and DVD to switch to DVD mode. during Press OK. play (AV1 remove will appear in the display window while your VCR waits to make the recording. To watch a DVD ONCE REC recordings - switch your VCR power off mode. G-CODE NO. 28 correct. Press the numbered buttons to enter the GCODE of the TV programme that you wish to 5. you wish E to enter the correct information. that TV channels have been tuned and video cassette with -~ :: -- TIME and stored. Insert -- G to select the (PR, DATE, The G-CODE system is manufactured under license from Gemstar Development Corporation. 1. DATE -- 9. Press STOP to end recording. recording using On Screen Display Timer PR DATE TIME PR-01 You may set up to seven timer record events within one month of the current date. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ SP -- SP -- SP -- SP -- SP -- SP -- SP SUMOTUWETHFRSA -- -- -- :: -- -~ -- Note Before the timer make sure that you have correctly and you know which stations you have tuned TV stations on your VCR. setting set the VCR clock 1. Insert a video cassette with protection 6. start and end times of the programme that you wish to record. tab into Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. your VCR. The video cassette should have the window side facing up and the arrow facing away from you. 2. You may also select the the start and end times pressing Press i. Press 1 or 2 to select REC. Press OK. DATE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ TIME 190020 :: :: -- -~ :: -- -~ :: -- -~ :: -- -~ DELETE: SP ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ SP -- 7. SP -- Press 2 to select the -- 4. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ Press or 4 3 :: -- -~ recording speed. or :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ PR PR-01 SP -- 5. TIME -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- -- SP SP SP SP SP SP SP Press the numbered buttons to enter the date of the programme. If you press OK before entering the date you may select one of the following automated recording features. Press 1 or 2 to select, then press OK to confirm. DLY To record every day (except Saturday and Sunday) at the same time. SU SA To record at the same time every week. ~ 1900 :: 2000 ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP SP -- 8. Check that the timer event details are correct. Press i twice. If PLEASE CHECK is displayed, you have entered incorrect and will need to re-enter the data. Press POWER to switch your VCR Standby. will appear in the display window while your VCR waits to make the recording. To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode. 9. Press STOP to end - DATE TIME 16 -- SP -- - -- DATE necessary, to SP -- Press the numbered buttons to enter the station that you wish to record. When selecting stations 1 9, press 0 first, then the channel number; for example Stations 3 03. You may also select Channels by pressing 3 or 4. Once selected press 2. If you wish to record from AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/ VIDEO IN from the back or on the front of your unit, press AV to select for correct display (AV1 or AV2). PR tape is left and speed from SP to LP, if complete recording the program. switches SP -- tape speed LP). SP -- SP -- to select the desired SP -- SP -- , TIME -- SP -- SP -- Press OK to start setting the timer record event. If all timer record events are full press 3 or 4 to select the event that you wish to remove and replace. Press 1 to delete the event. DATE SP -- SP -- (SP, IP, PR SP -- IP mode determines how much 3. SP -- SP -- Dr. OPR 16 -- SP -- NIC fOSD ON OFF Pr-12 DATE -- TIME -- by or 4. PR VCR ACMS 3 PR-01 PR PSET R Press the numbered buttons to enter the record- ing recording. Notes If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press 3 or 4 to select the event that you wish to delete or change. Press 1 to delete the event...or Press OK to change; then press 1 or 2 to select; Station, Date, Start and End times and LP. Press 3 or 4 to enter the correct information. If Timer record events Overlap... Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority. Example: Programme 1 is end at 17:00. programmed to start at 16:00 and Programme 2 is programmed to start at 16:30 and end at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.) 29 If Timer record events Overlap... Change (Deleting) Do not overlap programmes, since overlapping porconflicting programmes will not be recorded. Earlier recording times have priority over later recording times as shown in the diagram. tions of the the Timer Programme If at a later date you wish to delete or change any of settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press D the E to select the event that you wish to delete or change. Press F to delete the event...or or Example: Programme 1 will be recorded in its the last 30 minutes of Programme entirety, but only 2 will be recorded. Press OK to Press D PROGRAMME 1 17:00 16:00 17:30 16:30 PROGRAMME 2 (This portion will not be recorded.) If two programmed timer recordings overlap at 00:00 a.m., programme 2 will not be recorded. 30 midnight change, then press F or G to select; Station, Date, Start and End times and LP. or E to enter the correct information. Playing DVD a or General Features Video CD Note: Playback Setup Turn 1. on Unless stated otherwise, all the TV and select the video connected to the DVD Turn 2. the on input source player. the audio system (if applicable) and select source connected to the DVD player. input Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the play- 3. back side down. Press OPEN/CLOSE to close the tray. Playback automatically. If playback does not start, 4. starts press PLAY. In some cases, the disc menu might operations described Moving to another TITLE When disc has a more than title, you one stopped then the b / B to move to another title. You can playback appear play any title by inputting is stopped. its number while to another CHAPTER/TRACK Use the b B v V buttons to select the title/chapter you want to view, then press ENTER to start. When title or DISC MENU to return to the menu to playback is appropriate number (0-9) or use Moving Press TITLE can move another title. Press DISPLAY while instead: screen. use the remote control. Some features may also be available on the Setup menu. a disc has er ? on a more disc has than chapter/track as one than more track, you one chapter can move or a to anoth- follows: Press . or > briefly during playback to select chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, the next Use the number buttons to select the track you ? want to view and press RETURN to return to the menu screen. Menu settings and operating procedures may differ. Follow the instructions on the each menu screen. You also may set PBC to Off (See "PBC" on page ? press DISPLAY and press v / V to select the icon. Then, input the chapter/track chapter/track 24). numberoruseb/B. Notes: ? If parental control is set and the disc is not within rating settings you must input the password. (See "Lock Menu" on page 25.) the ? DVDs may have a region code. Your player does play discs that have a region code different from Search 1. player. (four). ? To watch a The DVD region during code for this timer player is 4 or > for about two seconds during playback. The not your Press and hold . 2. player will now go into SEARCH mode. Press and hold . or > repeatedly . to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, recording standby MX100 mode, press POWER and DVD to switch to DVD With mode. a (forward). Video CD, the Search speed changes: mX2, mX4, mX8 (backward) MX4, MX8 (forward). 3. or MX2, To exit SEARCH mode, press PLAY. Changing the Audio Channel Press AUDIO repeatedly during playback to hear (Stereo, Left, or Right). a dif- ferent audio channel 31 Still Picture and Frame-by-Frame Playback Repeat You 1. 2. Press PAUSE/STEP the remote control during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly. on ? Slow Motion The DVD ? player now ? go into PAUSE mode. ? ? 2. Press . The during pause. will enter SLOW mode. player Use the . 3. > or or > to select the t 1/16, t 1/8, t 1/4 or t 1/2 T 1/16, T 1/8, T 1/4 or T 1/2 required speed: (backward), or (forward). To exit Slow Motion mode, press PLAY. playback in reverse is not with possible - Repeat Chapter/Title/Off chapter. the current Title: repeats the current title. Off : does not play repeatedly. Track All Repeat Track/All/Off repeats the current track repeats all the tracks on a disc. : Off - : does not : play repeatedly. Notes: ?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe setup menu to use the repeat function (See "PBC" on page 24). ? Note: Slow motion Chapter: repeats Video CDs (X) during playback. will title/chapter/all/track on a disc. during playback to select a desired DVD Video Discs To exit still motion mode, press PLAY. Press PAUSE/STEP a repeat mode. ? 1. play can Press REPEAT If you press > once during Repeat back, the repeat playback cancels. Chapter (Track) play- 3D Surround Video CDs and DivX Discs. To Random 1. Press RANDOM during playback or in stop mode. automatically begins random playback and RANDOM appears on the TV audio again 1. to normal. 3. By pressing . or > the unit selects another during Random playback, title (track) and resumes playback. setup menu PBC, You must set PBC to Off to use the random function on (See "PBC" on the 1. 3. sequence. 3. 32 will be option. highlighted. Use1or2totoselect"3DSUR". playing at any chosen time on the disc: Press DISPLAY during playback. The elapsed playing time. time search Press v / V to select the time clock icon and Press A-B at your chosen appears briefly on the TV starting point. again at your chosen "A B" appears briefly on the TV repeat sequence begins. again the required start time in " A * to cancel. end " point. screen and the hours, minutes, and If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. screen. Press A-B Press A-B Input seconds from left to 4. 2. option "-:--:--" appears. A-B a to select the sound or 4 box shows the 2. To repeat during playback. To turn off the 3D Surround effect, select "Normal". page 24). 1. Use 3 To start Video CD with Repeat Press DISPLAY Time Search Note: a speakers (instead of speakers normally required for multi-channel from a home theater system). The sound Tip: On 3D surround effect that simulates multi- screen. 2. Press RANDOM Random a the five+ The unit 2. produce channel audio from two stereo right. Press ENTER to confirm. selected time. Playback starts from the Zoom Use to zoom the video enlarge Press ZOOM 1. image. during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture. → 1600% size → screen fit mode → You can when the contents of DVD discs: Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press DISC Input image appears on you're playing a DVD movie. Use the bBvVbuttons to zoomed To move through repeatedly normal or playback, appears menu may appear. ? press ZOOM To enter Press DISC MENU Camera Marker a the as camera options, angles, and point the TV screen on on briefly. Repeat markers. To Recall or Clear 1. During disc search menu a Marked Scene press SEARCH. The marker appears on the screen. playback, Press ENTER and marked scene. playback a is displayed. recorded at different scenes angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select a desired angle. Note that the number of the current angle appears on the display. Changing Within 10 seconds, press b / B to select number that you want to recall or clear. menu to exit. Angle If the disc contains the disc. The Marker icon appears to enter up to nine again camera playback from up to nine memorized To enter a marker, press MARKER at the start can desired 3. subtitle Press DISC MENU and the disc Marker Search 2. a menu, Disc Menu disc, VR disc and movie file. points. the b Press TITLE to exit. 3. CLEAR button. Zoom may not work on some DVDs. Screen fit mode is available for playing the DVD You or use Otherwise, the disc screen. offers features such menu spoken language and chapters for the title. Notes: ? on the menu The 2. the picture. resume number selection. Then press Press TITLE. If the current title has 1. Press 3/4 to select between Normal, Enhanced, 4. corresponding highlight your ENTER. and Maximum. 3. the B v V buttons to Title Menu the way the change screen Checking 100% size Screen fit mode: the DVD Features MENU. Each press of the ZOOM button changes the TV screen in the sequence: 100% size → 400% size 2. Special marker starts from the Or, press CLEAR and the marker the Audio Press AUDIO different audio Language repeatedly during playback language or audio track. to hear a With DVD-RW discs recorded in VR mode that have both a main and Bilingual audio channel, you can (L), Bilingual (R), or a mix of Bilingual) by pressing AUDIO. a switch between Main both (Main + number is erased from the list. 4. You on any marker by the marker search menu. can play inputting its number Subtitles Press S-TITLE repeatedly during playback languages. to see the different subtitle Note: ? The subtitle file of the DivX file is displayed only smi, srt and sub. ? If there is no information not read in the DivX file, or " 1 there is " or a code that etc. are can displayed. 33 Playing Audio CD an or MP3/WMA MP3 / WMA disc limited Disc ? The DVD player play recordings on CD-ROM, CD-R, or ? CD-RW discs. player is Sampling frequency: within 8 48 kHz (MP3), 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32 192kbps (WMA) The player cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which - within 32 MP3/WMA formatted can with this compatibility follows: as - - - ? Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER and playback starts. ? ? AUDIO CD 1/12 0:52:07 List Program creates an ISO 9660 file Track1 Track2 Track3 ? Track4 File names and must Track5 Track6 Track7 ? Clear All Track8 PROGRAM They should have maximum of 8 letters .mp3 or .wma extension. contain special letters such as / incorporate should not system. a an ?*:"<>letc. Edit ? The total number of files on the disc should be less than 650. MP3 / WMA 1. Press v / V to select folder, and press ENTER a to see the folder contents. 2. Press v / V to select a track then press PLAY ENTER. Playback starts. or player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MUSIC 0:00:00 This DVD 1/12 these List require certain pre-existing conditions (see above) to ensure compatible playback. Program 1-Music1 2-Music2 Customers should note that 3-Music3 4-Music4 required 5-Music5 6-Music6 DISPLAY Info PROGRAM Edit should Tip: ? If you owner. are in a file list return to the Folder on list, the MUSIC menu the v / V to use and want to highlight and press ENTER. ? ? ? Press DISC MENU to to the next page. On a CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO word on When a playing titles, you 34 move top of the file can see menu is highlighted. containing information such as track by pressing DISPLAY. the information is and music from the Internet. Our company has no right to grant such permission. Permission Clear All 7-Music7 permission in order to download MP3 / WMA files always be sought from the copyright Audio CD and MP3 / WMA Disc Random Features 1. Pause screen. Press PAUSE/STEP 1. To return to 2. Press RANDOM during playback or when playback is stopped. Random Playback begins immediately and RANDOM appears on the menu 2. during playback. playback, press PLAY, again. ENTER repeatedly or playback, press RANDOM disappears from the To return to normal until RANDOM menu screen. press PAUSE/STEP Tip: Moving > or the next track briefly during playback to go to beginning of the to return to the or current track. Press . twice 2. previous In briefly to step back to the 1. during random playback, the resumes random playback. 2. unit selects A-B To repeat a sequence during disc playback press A-B at your chosen starting point. The Repeat icon and "A" appear case tons Repeat track. of audio CD, to go directly to any track, enter the track number using the numbered but- 3. > another track and Press . 1. By pressing to another Track on the menu screen. Press A-B again at your chosen end point. The icon and "A-B" appear on the menu screen, and the sequence begins to play Repeat (0-9). repeatedly. Track/All/Off Repeat You 1. 3. can play a track/all on a Press REPEAT when disc. playing a To exit the sequence and return to normal play, press A-B again. The Repeat icon disappears from the disc. The repeat menu screen. icon appears. 2. Press REPEAT to select ? ? ? a desired repeat mode. To Track: repeats the current track All: repeats all the tracks on a disc. Off(No display): does not repeat playback once produce a 3D surround effect that simulates multi-channel audio from two stereo play repeatedly. Note: If you press > 3D Surround during Repeat Track playback, the speakers (instead speakers normally required for multi-channel audio from a home theater system). of the five+ 1. cancels. 2. Press AUDIO on To return to normal playback, press AUDIO disappears from repeatedly Search 1. during playback. "3D SUR." appears the until "3D SUR." menu screen. the menu screen. Press and hold . or > for about two seconds during playback. The 2. player will now go into SEARCH mode. Press and hold . or > repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Search speed and direction are indicated on the menu screen. 3. To exit SEARCH mode, press PLAY. 35 Repeat Programmed Programmed Playback 1. program 1. Insert a Press REPEAT when 2. contain 30 tracks. Press REPEAT to select ? disc. ? ? Audio CD MUSIC or menu Erasing Press PROGRAM again, then the Program the mark will E MUSIC 1/12 List E Program Track5 Track2 Track7 1-Music1 4-Music4 Track3 Track4 2-Music2 6-Music6 Track4 Track1 3-Music3 1-Music1 2. Press B to List Program Press PROGRAM in the stop mode to enter Program Edit mode. : move to the "Program" list. Use v/V to select the track that you wish to "Program" list. erase from the 4-Music4 5-Music5 Track7 4. 6-Music6 Clear All Track8 Clear All 7-Music7 DISPLAY Audio CD Menu PROGRAM Edit Info MP3/WMA Menu Video CD: Press PROGRAM while The program PROGRAM to exit the stopped. playback 1. is menu. 2. Note: List Track2 Track3 Track3 Track4 Track1 Clear All Video CD Menu Select a track on the "List", then press ENTER to place the selected track on the "Program" list. to place additional tracks on the list. Press B. Select the track you want to start list. playing on the "Program" Press PLAY or ENTER to start. Playback begins the order in which you programmed the tracks. Playback stops after all of the tracks on the "Program" list have To normal resume played once. playback from select a track of CD and then press PLAY. playback, "Erasing a List Track from Program Use 3/4 to select "Clear All", then press ENTER. complete Program for the disc will be erased. Note: Track5 Repeat Complete Program The programs removed. E Program Track5 Track2 to erase additional tracks on VIDEO CD Track1 the Follow steps 1-2 of List" as above. The On a Video CD with PBC, you must set PBC to Off the setup menu to use the programmed playback (See "PBC" on page 24). Repeat the list. Erasing appears. Press menu Press CLEAR. on PROGRAM Edit 36 during Repeat Track playback, the Track from Video CD 3. 2-Music2 Track6 6. once E Program Track1 Track5 5. play repeatedly. 1/12 0:00:00 List a 1. Edit mode. AUDIO CD 4. does not If you press > Note: 3. Off(No display): repeat playback cancels. 0:52:07 desired repeat mode. Track: repeats the current track repeats all the tracks on programmed list. mark will appear to the right of the word "Program" on the right side of the menu screen. to exit a Note: appears. E disappear disc. The repeat All: Press PROGRAM. The a MP3/WMA Discs: or AUDIO CD 2. playing icon appears. The program function enables you to store your favorite tracks from any disc in the player memory. A can Tracks programmed (or MP3/WMA) list in are also cleared when the disc is Viewing JPEG Disc a Moving Using this DVD Player you can view Kodak PICTURE CDs and discs with JPEG files. 1. Insert a appears disc and close the tray. The PHOTO on the TV screen. menu PHOTO List JPEG to another File Press . or > during viewing a picture to the previous file. once advance to the next file to or JPEG Zoom Use zoom (see 33 the to enlarge page) photo image. Preview To rotate JPEG Folder 1 JPEG Folder 2 picture >>> JPEG Folder 3 Press v / V JPEG Folder 4 during showing JPEG Folder 5 picture JPEG Folder 6 JPEG Folder 7 clockwise or a to rotate the picture counter clockwise. JPEG Folder 8 To listen to MP3/WMA music watching picture JPEG 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, the v / V buttons use the remote to Viewing the file proceeding starts. While viewing a file, you can press STOP to the previous menu (PHOTO menu). Slide Show 1. move or PLAY. files while on same containing to MP3/WMA disc. the two types of file in player. display PHOTO Press TITLE to 3. Press v / V to select 4. Use B / V to select Playback STOP is to the next page. listening the 2. to move photo starts. The a menu. Operation file. icon then press ENTER. will continue until playback pressed. Tip: JPEG Use vVbBto display Insert the disc the If you want to view a particular file, press v / V to highlight a file and press ENTER Press DISC MENU to can music files recorded and press ENTER. highlight 3. on You To listen to highlight the (Slide Show) then press ENTER. only the desired music watching picture, programmed the desired tracks from the "MUSIC" menu and then proceed as above. Tip: ? There are three Slide (Normal) and ? Speed options (Slow). : >>> (Fast), >> On a disc with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO word ? > on top of the menu is JPEG disc limited ? as compatibility with this player is follows: Depending upon the size and number of JPEG a long time for the DVD player files, it could take highlighted. to read the disc's contents. If you don't see an onscreen Press RETURN, information of file is hidden. display after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels as 2760 x --- Still Picture 1. 2048 Press PAUSE/STEP The 2. JPEG player will now during slide show. ? go into PAUSE mode. To return to the slide show, press PLAY PAUSE/STEP again. or pixels and burn another disc. The total number of files and folders on the disc should be less than 650. press ? Some discs may be incompatible due to a recording format or the condition of disc. different ? Ensure that all the selected files have the extensions when ? If the files have rename ? File them names are Windows into the CD ".jpg" layout. ".jpe" or ".jpeg" extensions, please ".jpg" file. as without able to be read the files copying by shown ".jpg" extension will not be this DVD as JPEG player. image Even though files in Explorer. 37 5.1 Speaker Setup This to chapter includes important reference information help you set your DVD/VCR Combi receiver. If you connected following settings for the built-in 5.1 channel how far the sound has to travel to reach your set lisThis allows the sound from each speaker tening point. Press b / B to 1. Press SETUP. The setup 2. Use v / V to select the AUDIO 3. move menu speaker. [0.3(1)m(ft) appears. option Use v / V to select the move Speaker Setup option to the third level. "Select" is Press ENTER and 5.1 Speaker Setup menu appears. AUDIO Speaker Size Volume Distance Test Front L Small dB 0 m(ft) 0.6(2) Off Select Move Return 5. Use b / B to select the desired 6. Adjust options using 7. Press RETURN to return to the Speaker Enter speaker. v / V / b / B buttons. menu screen. selection Select a speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer) Note: Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the change speaker settings settings. are fixed, you cannot the Volume Press b / B to speaker. (-6dB 38 adjust the output 6dB) ~ the Distance of the selected 6.0(20)m(ft)] Test then highlighted. 4. - adjust then press to the second level. press B to to your DVD/VCR Combi to reach the listener at the same time. surround decoder. B to speakers receiver, setting the Distance lets the speakers know Speaker Setup Make the Distance level of the selected Press b / B to test the signals of each the volume to match the volume of test rized in the system. Front Left (L) → Center → Rear Left (R) → Front Right (R) Right (L) → SubWoofer. → Rear speaker. Adjust signals memo- DVD VR format Disc Playing a This unit will play DVD-R/RW discs recorded Maintenance and Service using using the DVD-Video format that have been finalized a ? This unit will play DVD-RW discs recorded using Recording (VR) format. disc and close the tray. The TITLE LIST on the TV screen. Insert a menu appears DVD-VR When shipping Please ? save ? Press v / V to select a track then press PLAY ENTER and playback starts. Press TITLE to move or to the list menu. original shipping carton and packing the exterior surfaces clean Do not use near volatile liquids such as insecticide the unit. or plastic products in contact long period of time. since they Do not leave rubber with the unit for a leave marks the surface. Cleaning on Operation the unit player, use a soft, dry cloth. If the extremely dirty, use a soft cloth lightly with a mild detergent solution. To clean the Note: Unfinalized DVD-R/RW discs cannot be played in this surfaces are moistened player. ? the the unit factory. spray ? before materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed Keeping 3. chapter service technician. the Unit Handling at the 2. a DVD-recorder. the Video 1. Refer to the information in this contacting Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player does not support these kinds of discs. Do not or use thinner, strong solvents such as these as might damage alcohol, benzine, the surface of the unit. What is 'CPRM'? CPRM is a copy protection system (with scramble system) only allowing the recording of 'copy once' broadcast programs. CPRM stands for Content Protection for Recordable Media. play is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings This can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings players that are only be played on specifically compatible with CPRM. can Maintaining the Unit The DVD player is a high-tech, precision device. optical pick-up lens and disc drive parts are dirty worn, the picture quality could be diminished. If the or Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of For details, please use. contact your nearest authorized service center. 39 Playing a DivX Movie Disc DivX disc Using this DVD Player you can play with this player is limited DivX disc. ? disc and close the tray. The MOVIE appears on the TV screen. Insert 1. compatibility follows: as a menu Available resolution size of the DivX file is under 720x576 ? MOVIE The file (W x name H) pixel. of the DivX subtitle is available by 56 characters. 0:00:00 List Movie Folder 1 ? Movie Folder 2 Movie Folder 3 If there is impossible code to express in the DivX as mark on the " file, it may be displayed Movie Folder 4 Movie Folder 5 " _ display. Movie Folder 6 Movie Folder 7 Movie Folder 8 ? If the number of the screen frame is over 30 per 1 second, this unit may not operate Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the 2. v / V buttons on the remote to normally. ? and highlight ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. ? If the file is recorded with GMC, the unit supports only 1-point of the record level. * GMC? MPEG4 encoders, like DivX or Xvid, have this option. are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC. Press DISC MENU to On a move to the next page. CD with MP3/WMA, JPEG and MOVIE file, you can MUSIC, PHOTO and MOVIE menu. Press TITLE switch and is audio is There Tip: ? or GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some Press STOP to exit. 4. interleaved, either video outputted. press ENTER. 3. If the video and audio structure of recorded file is not MUSIC, PHOTO and MOVIE word highlighted. on top of the menu Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 8 48 kHz (MP3), ? - within 32 ? Bit rate: within 8 32 40 48kHz (WMA) 320kbps (MP3), 192kbps (WMA) - - - Additional Features-VCR part On Screen You may Video Doctor Display easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will appear on the TV screen. If a recording is taking place these On Screen onto the Displays This feature informs you that there is a problem with your DVD/VCR Combi receiver. These error messages will appear on the TV screen. 1. will not be recorded Press i. Press 1 tape. or 2 to select Dr. Press OK. Press CLK/CNT to 1. Press CLK/CNT display. repeatedly to cycle through VIDEO DOCTOR the HEAD STATUS display options. The tape counter and amount of tape left will appear if there is a tape loaded. TAPE STATUS NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME PSET R REC majority of the On Screen leaving only the clock or tape ON OFF After 3 seconds the Displays will clear counter and the amount of Press CLK/CNT the TV again tape left on to remove all the screen. displays 2. Pr-12 ACMS NIC fOSD 2. (Self-Diagnosis) OK OPR Press 3 or 4 to check a problem. HEAD STATUS from O screen. PLEASE CLEAN: Clean your video heads. TAPE STATUS Tape Counter Memory Stop Digital Tape Counter display window instead of The O Insert displayed on the the time by pressing CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings on 1. can be tape with its protection tab in place 2Shows the number of timer recording. NEXT TIMER PROGRAMME O Press CLK/CNT. or start recording. will display the The tape counter in hours, minutes and seconds. Press STOP when playback or actual recording play PR-01 26 10:00~11:00SP Shows the current status of timer Press CLEAR to set the counter to 0:00:00. 2. a NO. OF TIMER PROGRAMME O the tape. Press PLAY NOT RECORDABLE: time 3. recording. Press i is complete. Press BACKWARD. The tape will rewind and automatically stop when the counter returns to 0:00:00. 41 Hi-Fi Stereo Sound System Your DVD/VCR Combi receiver will record and back Hi-Fi stereo sound. In addition it has NICAM digital to record and a play- stereo stereo sound decoder. This allows you the sound in several different playback ways. Video cassettes recorded on your DVD/VCR Combi receiver will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc receiver. 1. another DVD/VCR Combi or Your DVD/VCR Combi receiver's NICAM digital sound decoder allows you to enjoy broadcasts with NICAM sound, as well as standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds: STEREO NICAM Sound is automatically recorded on the Hi-Fi stereo and mono tracks of the video tape. BIL NICAM Both audio channels will be recorded stereo tracks. The will be recorded on primary language the mono on the Hi-Fi channel (left) track of the video tape. MONO The sound is recorded mono on the Hi-Fi tracks and the track of the video tape without any separation. 2. Press AUDIO repeatedly until the desired audio mode appears. 3. The choice is STEREO, LEFT, RIGHT and MONO. In BIL NICAM playback the primary language is output on the left channel and the secondary channel is output simultaneously from the right channel when audio output is set to STEREO. The primary language willbe output from both channels when the audio setting is MONO. Please note that when adjusting the tracking control Hi-Fi stereo sound may revert to MONO. 42 Additional Features Last Scene Memory This player memorizes last if you even off the remove from the last disc scene If you load scene is player. scene remains in memory the disc from the player or switch that is viewed. The last memorized, the a disc that has the automatically scene recalled. Note: This player does not memorize the scene of a disc if you player before commencing to play the disc. switch off the Screen Saver The appears when you leave the DVD mode for about five minutes. screen saver in player Stop Video Mode Setting With certain discs, the flickering That or means playback picture may be on straight lines. interpolation or De-interlace is Dot Crawl is shown Vertical perfectly matched with the disc. In this case, the picture quality may be improved by changing the not video mode. To change the video mode, press and hold during disc playback. DISPLAY about 3 seconds The on new video mode number selected is the TV has until screen. displayed quality procedure Check whether the video improved. If not, repeat the picture quality is improved. Video mode sequence: MODE1 → MODE2 → MODE3 above → MODE1 If you turn off the power, the video mode will return to initial default state Detailed MODE1 al or : MODE2 : Description The video (MODE1). of each Video Mode material of the DVD video (film materimaterial) is determined from disc information. source Suitable for playing film based content or video by the progressive scan method. based material recorded MODE3 : Suitable for playing video based comparatively little motion. content with Note: The video mode setting only works when Progressive Scan mode is set to "On" on the the setup menu. 43 Copying from DVD To VCR This unit allows you to copy the contents of a DVD to a VHS tape with a press of the REC/ITR button. Notes: Be sure setup to set to "Off" on the menu. If the DVD you protected, 1. "Progressive Scan" to copy is copy you may not be able to copy the disc. are attempting 3. Insert VHS With this video recorder you can make recordings from an external source, such as copying from another blank VHS a Copy the DVD to VHS videotape Tape or a camcorder. In the following description, this video recorder will be recording and will be referred to as VCR The other appliance will be used for playback and used for one will be referred to 1. into the VCR deck. 2. Press the REC/ITR button. video recorder Note Tape Insert another video recorder B. Insert Disc Insert the disc you wish to copy in the DVD deck and close the disc tray. 2. Recording from as VCR A. VCR A should be connected to the AUDIO L/R (VCR IN AV1)/VIDEO (VCR IN AV1) on the rear panel of your unit or AUDIO IN (L(MONO)/R) / VIDEO IN on the front panel of your unit. Insert the recorded tape into VCR A and a blank tape into VCR B. The DVD will go into Play mode and the DVD/VCR Combi receiver will go into Record mode. If the DVD disc to press the 3. appears, you may need button manually to begin menu Play recording from AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) terminals on the AV 1 for copying. of your unit. AV 2 for recording from AUDIO IN Note: VIDEO IN terminals If you press the REC/ITR button, be sure this DVD/VCR Combi receiver in DVD mode. 4. Stop the Copy Process When the DVD is finished playing, press STOP to end the copy. You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again. 44 Press AV until the socket you wish to record from is displayed. (VCR B) on rear (L(MONO)/R)/ the front of your unit. 4. To start recording, press the REC/ITR and PLAY on VCR A. 5. When you want to finish on both video recorders. copying, on VCR B press the STOP Presetting You make that you have turned down the sure (see "Presetting radio stations" on the left). Press FM/AM the remote control on front on Preset radio stations in the DVD/VCR Combi receiver memory first volume. 1. to the Radio Listening preset 50 stations for FM and AM. Before can tuning, the Radio Stations panel until the frequency the display and TV screen. or on the 1. band appears Press FM/AM the remote control on front on panel until the frequency the display and TV screen. or on the band appears The last received station is tuned in. 2. Press 3/4 on select the preset station you the remote control repeatedly to want. Each time you press the button, the DVD/VCR Combi RADIO AM receiver tunes in 01 522kHZ 3. OK, CLEAR , one preset station at a time. Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. - To Clear the Stored Radio Stations 1. RADIO FM Press FM/AM 108. 00MHZ on 3. Press 3/4 the Operation on Press FM/AM panel Hold down on the remote control 1 or 2 or on the RADIO to select the desired band. + PRESET hold down 1 and 2 seconds, and - on a on the front panel FM or , station is searched for 2. Press 3/4 on 06 the remote control to select your RADIO 87. 50MHZ , OK, CLEAR desired station. RADIO FM 06 108. 00MHZ the remote control for automatically. 6. or on band appears the remote control to select your desired radio channel. front 4. panel until the frequency the display and TV screen. OK, CLEAR , 2. the remote control on front 06 AM OK, CLEAR Press MEMORY on , the remote control. 3. 10 522kHZ OK, CLEAR Press CLEAR the remote control to clear the stored radio station. 7. Repeat steps 2 to 5 to store other stations. RADIO FM 10 98. 00MHZ , OK, CLEAR Note While record or record pause mode, the CLEAR function may not be operated. 45 into Tuning a Press FM/AM 1. Station on Manually the remote control front panel until the frequency the display and TV screen. on Press FM/AM 2. front panel Press 3. 1 + and on the the remote control or on the to select the desired band. PRESET 2 or on band appears on on the front panel or press the remote control to tune in the - desired station. into Tuning Hold down + Station PRESET down 1 and 2 seconds, and a a on - on Automatically the front panel the remote control for 1 station is searched for hold or or 2 automatically. Note The search may not stop at weak a station with a very signal. Mute Press MUTE to mute your unit. can mute your unit in order, for You answer appear in 46 telephone, MUTING the display. the example, to and MUTE indicator Reference Language Codes Use this list to input your desired language for the Disc Audio, Disc Subtitle, Disc Menu. following initial settings: Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Country Choose a 8373 8471 8479 Codes country code from this list. Country Afghanistan Argentina Code Code Country Malaysia Code ET MY Saudi Arabia SA FJ Maldives MV SN Country Code AR Country Ethiopia Fiji Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU AF SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK Costa Rica CR Italy IT Panama PA Turkey Uganda UG Croatia HR Jamaica JM Ukraine UA CZ JP PH United States US DK Japan Kenya Paraguay Philippines PY Czech Republic Denmark KE Poland PL Uruguay UY Ecuador EC Kuwait KW Portugal PT Uzbekistan UZ Egypt EG LY Romania RO Vietnam VN El Salvador SV Libya Luxembourg LU Russian Federation RU Zimbabwe ZW TR 47 Troubleshooting Check the following guide for the possible cause of a problem before service. contacting Cause Symptom Correction No power. The power cord is disconnected. Plug securely. The power is on, but the DVD/VCR Combi receiver does not work. No disc is inserted. No tape is inserted. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) No The TV is not set to receive DVD/VCR Combi receiver signal output. picture. the power cord into the wall outlet Select the appropriate video input mode the TV so the picture from the DVD/VCR Combi receiver appears on the TV screen. on TV/VCR mode for DVD/VCR Combi receiver is set to TV. Press the TV/VCR button on the remote control repeatedly to choose VCR mode. TV indicator disappears in the display window. The video cable is not connected Connect the video cable securely. securely. No sound. the TV. The connected TV power is turned off. Turn The equipment connected with the audio cable is not set to receive DVD/VCR Combi receiver signal output. Select the correct input mode on the audio receiver so you can listen to the sound from the DVD/VCR Combi receiver. The audio cables Connect the audio cables are not connected on securely. securely. The power of the equipment connected with the audio cables is turned off. The digital audio output position. is set to the wrong The playback picture is poor. The disc is Tape heads are The DVD/VCR Combi receiver does not start playback. unplayable digital audio output to the position, then turn on the DVD/VCR Combi receiver again by pressing POWER. Clean the disc. Clean video heads. dirty. or was recorded on Use v/V for manual tracking while tape is playing. adjustment Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) No disc is inserted. No tape is inserted. An Set the correct dirty. Tape is a rental another VCR. Turn on the equipment connected with the audio cables. Insert disc is inserted. a playable disc. the disc (Check type, color system, and Regional code.) The disc is placed upside The disc is not placed within the 48 damaged tapes might. guide. playback dirty. Clean the disc. The level is set. Cancel the Rating function rating level. Rating side down. Place the disc on the disc tray inside the guide. The disc is Video Head Cleaning Whenever a video cassette is inserted into or ejected from This should mean that additional head cleaning should not However dirt accumulating on the head after a long period blurred or broken up. High quality video cassette tapes will or Place the disc with the down. or correctly change the your VCR the video head is automatically cleaned. be necessary. of time can cause the playback picture to become not normally deposit dirt onto the video head, but old Symptom Cause This remote control uses the same buttons for VCR and DVD functions The remote control is not pointed at the remote sensor of the DVD/VCR Combi receiver. sensor The remote control is too far from the DVD/VCR Combi receiver. Operate (7 m). There is an obstacle in the path of the remote control and the DVD/VCR Combi receiver. Remove the obstacle. The batteries in the remote control exhausted. Replace (ex. PLAY). Correction are the remote control within 23 ft the batteries with (ex. PLAY). Press PAUSE/STEP during recording. The DVD/VCR Combi receiver is in the RECORD PAUSE MODE. The tape will not rewind or fast-forward. The tape is forwarded. The run playback picture If Check the tape. the RF cable for con- Set the TV to the Video channel nection. (see Noise appears visual search. This is normal. Turn camcorder p. 16). on and operate properly. Noise appears during normal playback. The automatic Breaks are noticeable in Hi-Fi soundtrack. There is no tape loaded, or the tape loaded has had its record safety tab removed. Recording to resume fast- rewound does not appear while the tape is running. during (X) recording. or already fully you're using only new ones. When using a VCR, first press the VCR button. When using a DVD, first press the CD/DVD button. This remote control uses the same buttons for VCR and DVD functions The tape does not Point the remote control at the remote of the DVD/VCR Combi receiver. The automatic cannot be The started. tracking tracking mode is engaged. engaged. mode is (another VCR, camcorder) properly connected. source not been has Try manual tracking (see p. 26). Try manual tracking (see p. 26). Insert cover a tape, or using adhesive tape, the hole where the tab was removed. Tape-to-tape editing not possible. Timer work. recording is The clock/or the timer have been set incorrectly. won't The timer is not Re-perform tings. engaged. The loaded tape has had its record tab removed. Audio mode is not set Confirm that the camcorder is connected. safety properly the clock and/or timer set- Press POWER and confirm that the timer indicator is displayed on the DVD/VCR Combi receiver's Display. Insert a pate with adhesive tape, or insert a tape with the record safety tab intact. properly. Select "STEREO" by repeatedly pressing AUDIO on the remote control. No Hi-Fi sound. Moisture Condensation Moisture condensation ? When the DVD/VCR Combi receiver is moved from a ? can occur: cold Under place to a warm extremely In locations where moisture condensation may ? place. humid conditions. ? occur: the DVD/VCR Combi receiver plugged into an AC power outlet with POWER On. This will help prevent condensation. Keep When condensation has occurred, wait a few hours for the DVD/VCR Combi receiver to dry before using it. 49 Specification General Power requirements consumption Dimensions (approx.) Mass (approx.) Operating temperature Power Refer to main label Refer to main label 430X81X360mm(wxhxd) 5.8 kg (17.6 lbs) 5˚C to 40˚C Timer 24-hour Operating humidity 5%to90% (41˚F to 104˚F) display type DVD Section Semiconductor laser, PAL/NTSC Laser Signal system Frequency response wavelength 650 nm DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto20kHz CD:8Hzto20kHz Signal-to-noise ratio More than 65 dB Harmonic distortion Less than 1.0% Dynamic More than 60 dB range (analog out connectors only) (DVD, CD) Outputs S-VIDEO OUT COMPONENT VIDEO OUT (PROGRESSIVE SCAN) (Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin (C) 0.3 V (p-p) 75 ohms (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 x 1 VCR Section Head system 6 heads helical Television system Recording format PAL/SECAM colour system PAL/MESECAM RF OUT RF Modulator G UHF 28 Tape speed PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP) 68 - scan azimuth system (Adjustable) NTSC (Playback only); 35.35 mm/s (SP), 16.67 (EP) SP: 4 h (E-240 tape), LP: 8 h (E-240 tape) About 180 min (E-180 tape) VIDEO: 1.0 V(p-p), 75 ohms, unbalanced mm/s 11.12 mm/s Maximum recording time Rewind time Input level Output level Signal-to-noise AUDIO: -6.0 dBm, more than 47 kohms VIDEO: 1.0 V(p-p), 75 ohms, unbalanced ratio VIDEO: More than 43 dB AUDIO: More than 72 dB More than 42 dB Dynamic range (Hi-Fi) (Mono) AUDIO: More than 85 dB Tuner Section Tuning FM: 87.5 range AM: 522 Intermediate frequency - - 108.0 MHz 1611 kHz FM: 10.7 MHz AM: 450 kHz Amplifier Section Stereo mode Surround mode 25W+25W(6ohmat1kHz,THD10%) Front: 25W + 25W (THD 10%) Centre: 25W Surround: 25W + Subwoofer: 60W 50 25W (8 (6 ohm at 1 kHz, THD ohm at 30 Hz, THD 10%) 10%) (LP), Speaker Section Satellite (LHS-CX247T) Type Impedance Frequency Response 1 Way 1 Speaker 6Ω 130 20,000 Hz - Sound Pressure Level 85 dB/W Rated 25W Input Power Max Input Power Net Dimensions (W Net Weight 50W x H x 90x138.5x100mm D) 0.89 Passive Subwoofer (LHS-CX247W) Type Impedance Frequency Response 1 kg Way 1 Speaker 8Ω 50 1,500 Hz - Sound Pressure Level 82 dB/W Rated 60W Input Power Max Input Power Net Dimensions (W Net Weight (1m) (1m) 120W x H x 160x350x345mm D) 4.5 kg Accessories: AM/FM antenna, Design and Speaker cable specifications are Manufactured under license from x 5, RCA cable, Remote control subject to change x 1, Batteries (AAA) x 2 without notice. Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. 51 P/N: 3834RH0064B
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021