LG | LH-T6000 | LG LH-T6000 Owner’s Manual

LH-A6730A JA2ALLS
AV RECEIVER
OWNER'S MANUAL
MODEL: LH-T6000
(AMP: LH-A6730A
DVD Player: DV7100
Speakers: LHS-A6730T, LHS-A6730C,
LHS-A6730W)
Before
connecting up, operating or repairing
product, please read this instruction booklet
carefully and completely.
this
Safety
Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
risk of electric
a
shock to persons.
The exclamation mark within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the instructions
(servicing)
accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
CAUTION: The
(dripping
as
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
vases,
About the
symbols
Indicates hazards
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
Manufactured under license from
Dolby Laboratories.
Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
"Dolby",
"Pro
Manufactured under license from
SERIAL NUMBER: The serial number is located
on
the back
of this unit. This number is
unique to this unit and not available
requested information here and
permanent record of your purchase.
to others. You should record
retain this
Model No.
Serial No.
2
guide
as a
___________________________________
___________________________________
Digital
Theater
Systems, Inc. US Pat. No. 5,451,942 5,956,674,
5,974,380, 5,978,762 and other worldwide patents
issued and pending. "DTS" and "DTS
Digital Surround"
registered trademarks of Digital Theater Systems,
Inc. Copyright 1996, 2000 Digital Theater Systems, Inc.
All rights reserved.
are
Before Use
Table of Contents
Introduction
Precautions
SafetyPrecautions..........................2
TableofContents...........................3
BeforeUse................................3
FrontPanelButtonsandDisplayWindow
.
.
.
.
.
.
.
.
.4
Handling
When
the unit
shipping
the unit
RearPanel................................6
It may be convenient to keep the original shipping carton and packing materials come in handy. For maximum
Preparation
protection, re-pack
at the factory.
RemoteControlButtons......................5
the unit
it
as
was
originally packed
AntennaConnections........................7
ConnectingtoaTV.........................8
ConnectingtoVideoEquipment.................9
.10-11
ConnectingtoOptionalEquipment.
12
Assembling and Connecting to the Speakers
SpeakerSystemConnection..................13
SpeakerPositioning.........................14
.
.
.
.
.
.
.
.
.
Sound
.
.
.
.
.
.
To
keep
Do not
near
the surface clean
use
volatile
liquids,
such
as
insecticide spray,
the unit. Do not leave rubber of
contact with the unit for
leave marks
a
plastic products in
long period of time. They will
the surface.
on
Installing
Adjustments
Do not install the unit in
SpeakerSettings...........................15
DelayTimeSetting.......................15-16
SoundLevel..............................17
TestTone................................17
MiniGlossaryforSoundMode.................18
Display Information about External Digital
InputSignal..............................18
bookcase
or
a
confined space, such
as a
built-in cabinet.
Allow
adequate air circulation to prevent internal heat
buildup.
Do not place the unit on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may
block the ventilation slots.
Do not install the unit
SoundMode..............................19
ators
ToneControl..............................19
light,
AdjustingDynamicRange....................19
Do not
heat
near
sources
such
as
radi-
air ducts, or in a place subject to direct sunexcessive dust, mechanical vibration or shock.
or
place heavy objects
on
the unit.
SourceSelection...........................19
SelectingaDigitalSource....................19
Settings
and
Adjustments
Cleaning
the unit
To clean the cabinet
OSDMenuSettings......................20-21
.20
WhenselectingtheINPUTSELECT.
.21
WhenselectingtheTONECONTROL.
.21
WhenselectingtheSPEAKERLEVEL.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Use
a
use a
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
or
lightly
use
thinner,
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents, such
as
these
as
might damage
alcohol,
the surface
of the unit.
Operation
OperationwithRadio.....................22-23
.22
PresettingtheRadioStations.
ListeningtotheRadio....................23
OtherOperations...........................23
SleepTimerSetting......................23
.
.
.
.
.
.
.
.
.
.
.
.
.
Dimmer...............................23
Mute.................................23
UsingHeadphoneJack...................23
.23
VideoRecordingfromVIDEO1OUT.
.
.
.
.
.
.
.
.
Reference
Troubleshooting............................24
Specifications.............................25
3
INTRODUC
Front Panel Buttons and
Display
Window
SURROUND MODE Select
STANDBY-ON
FUNCTION/JOG Dial
MASTER VOLUME
Control(UP/DOWN)
TUNING MODE
REMOTE Sensor
DISPLAY Window
SET/MEMORY
INPUT SELECT
STANDBY indicator
red when the receiver
Lights
Standby
is in
mode
HEADPHONE Jack
(off).
Surround mode
indicator
Audio Stream
STEREO indicator
indicator
TUNED indicator
MEMORY indicator
MUTE indicator
SLEEP indicator
DIGITAL
MEMORY
SLEEP
STEREO TUNED
MUTE
PL II
dB
ms
kHz
MHz
PCM
Frequency/Delay time/Input signal/Volume
4
etc. Indicators
Remote Control Buttons
MUTE
POWER
VIDEO1
FM/AM
VIDEO2
CD/DVD
Input
Selector
TV
input
Selector
input
Selector
input
Selector
AUDIO INPUT(AMP)/TV AV(TV)
TITLE(DVD)
NUMBERS(DVD/TV)
TEST TONE(AMP)
BY PASS(AMP)
PRO LOGIC II(AMP)
DYNAMIC RANGE(AMP)
MONO/STEREO(AMP)
SURROUND(AMP)/
SOUND(DVD)
REPEAT(DVD)
REPEAT
A-B(DVD)
RETURN(DVD)
ZOOM(DVD)
CLEAR(DVD)
SPEAKER
MODE(AMP)
PROGRAM(DVD)
MARKER(DVD)
VOLUME(+/-)
PRESET(+/-)(AMP)/
SLOW(DVD)
SEARCH(DVD)
DELAY(AMP)/
MENU(DVD)
LEVEL(AMP)/
SETUP(DVD)
CURSOR
For
use
on a
GUI
in
(
highlighting
)(DVD)
a
OSD(AMP)/
DISPLAY(DVD)
selection
screen, TITLE and
menu
MENU
STOP(DVD)/
PAUSE/STEP(DVD)/
PLAY(DVD)
screen.
CHANNEL(TV)
MEMORY(AMP)/ENTER(DVD)
TONE(AMP)/
AUDIO(DVD)
SKIP/SCAN(
/
)(DVD)
Press and hold button for
about two seconds for search
SUBTITLE(DVD)
function.
TUNING(-/+)(AMP)
Selecting
the
source
control
Press
[AMP]
SLEEP(AMP)/
ANGLE(DVD)
Remote
operation:
to select the
"AMP" function.
Press
[DVD]
to select the
"DVD" function.
Press
[TV]
to select the
"TV" function.
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
remote
Angle:
sensor
installation
Remove the
the buttons.
Distance: About 23 ft
battery
battery
cover on
the
rear
of the remote control, and insert two
(7 m)
from the front of the
AAA AAA
sensor
R03
(size AAA) batteries
aligned correctly.
with
and
About 30° in each direction in front of the remote
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
5
INTRODUC
Rear Panel
FM 300Ω Antenna Connector
SPEAKER Connectors
AM Antenna Connectors
VIDEO1
Input
Connectors
VIDEO2
Input
Connectors
DVD
Input
Connectors
TV
Input
Connectors
VIDEO1
Output
POWER
Connectors
MONITOR OUT
Connector
SUBWOOFER PRE OUT
S-VIDEO OUT
Connector
Connector
6(5.1)
CHANNEL AUDIO OUT
Connect to
--
6(5.1) channel player
center speaker connection
a
--
speakers
(surround) speakers
--
--
rear
front
subwoofer connection
connections
connections
OPTICAL IN
Connector
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
6
S-VIDEO IN
Connector
COAXIAL IN
Connector
Cord
Antenna Connections
Connect the
supplied FM/AM antennas
loop antenna to the
Connect the AM
for
listening
to the radio.
AM antenna connector.
Connector the FM wire antenna to the FM 300Ω connector.
FM Wire antenna
AM
(supplied)
Loop
antenna
PREATION
(supplied)
otes
To
prevent noise pickup, keep the AM loop
Be
sure
After
antenna away from the AV Receiver and other
fully extend the FM wire antenna.
connecting the FM wire antenna, keep it
components.
to
as
horizontal
as
possible.
7
Connecting
Make
the
one
of the
capabilities
Tips
Depending
to
to a TV
following connections, depending
existing equipment.
on
of your
Connection
1
Connect the MONITOR OUT
jack
Receiver to the video in
on
video cable
on
your TV and other equipment you wish
are various ways you could connect
connect, there
2
the AV Receiver.
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
best connections.
Caution
the AV Receiver is connected
TV. Select the correct AV
using
the
(V).
Connect the VIDEO IN
the video out
3
jack
on
jack
on
the TV
the AV Receiver to
using
the video cable
Connect the Left and
of the
AV Receiver to the audio
on
TV
sure
the AV
(V).
System
Make
jack
on
the TV
input
on
directly
your TV.
to the
4
using
the audio
Right AUDIO IN jacks
left/right out jacks
cables (A).
Connect the S-VIDEO OUT
to the S-Video in
cable
jack
on
jack
the TV
on
the
the AV Receiver
using
the S-Video
(S).
otes
The
signal
of S-VIDEO OUT
jack
will
output only
when the unit is connected to S-VIDEO IN.
When you connect the AV Receiver to your TV, be
sure to turn off the power and unplug both units from
the wall outlet before making any connections.
8
Connecting
to Video
Equipment
Rear of VCR1
VIDEO
OUTPUT
AUDIO OUTPUT
L
R
VIDEO
L
OUT
PREATION
R
L
A
V
A
S-VIDEO
AUDIO INPUT
INPUT
S
Rear of AV receiver
Rear of VCR2
VIDEO
OUTPUT
or
LDP
AUDIO OUTPUT
R
L
Connection
1
Connect VCR1's audio and video out
VIDEO1 IN
jacks
on
the AV Receiver
audio and video cable
in
jacks
on
Connect the
2 IN
LDP
jacks
to the
the
The audio and video
the VCR1 should be connected to the
VIDEO1 OUT
2 VCR2,
(A, V).
jacks
using
jacks
analog
the AV Receiver.
audio and video
any other video
the AV Receiver.
or
on
on
outputs of
source
otes
When you select the function mode to VIDEO1,
video signal is not output at the jack.
If the audio format of the
match the
Receiver
a
capabilities
will produce
digital output
a
does not
of your AV Receiver, the AV
a strong, distorted sound or
no
sound at all.
to the VIDEO
9
Connecting
to
Optional Equipment
Rear of DVD
player (or Digital Device, etc)
VIDEO
OUTPUT
R
L
AUD
O
OPTICAL
OUTPUT
A
COAXIAL
D GITAL OUTPUT
V
O
X
Rear of AV receiver
Connection
If the
equipped with
COAXIAL or OPTICAL DIGITAL OUT jacks, connect
them to to the corresponding input jacks of the AV
auxiliary
devices
(e.g. DVD)
are
Receiver.
1
to the audio and video in
Receiver
2
jacks
Receiver to the OPTICAL OUTPUT
player
or
Digital
jacks
Receiver to the COAXIAL OUTPUT
player
or
Digital
on
the AV
jacks
on
the
Device.
Connect the COAXIAL INPUT
DVD
10
the video cable
Connect the OPTICAL INPUT
DVD
3
using
jacks on the DVD
jacks on the AV
supplied (A, V).
Device.
on
the AV
jacks
on
the
connecting
75 ohm coaxial
When
the COAXIAL
cable,
jack,
not normal
be
sure
to
use
type audio cable.
connecting the OPTICAL jack, be sure to use
optical fiber cable.
When connecting the OPTICAL jack, remove the dust
cover. If the OPTICAL jack is not used, insert the dust
the
Connect the audio and video out
player
otes
When
cover.
Connecting
Analog
to
Optional Equipment (Cont'd)
connection to
connectors
a
multi-channel A/V receiver with
6(5.1) Channel
(Dolby Digital)
This AV receiver contains
a
multi-channel decoder. This enables
Surround without the need for
an
optional
playback
of DVDs recorded in Multi-channel
decoder.
PREATION
Rear of
DVD
player
C
F
R
1
Connect the CENTER and WOOFER
jacks for the
speaker and the Subwoofer (C) to the corresponding in jacks on your receiver.
Center
Rear of AV Receiver
3
Connect the Left and
to the
corresponding
Right REAR speaker jacks (R)
jacks on your receiver.
in
Connect the Left and
2 (F)
to the
Right FRONT speaker jacks
corresponding in jacks on your receiver.
11
Assembling
The front and
front and
rear
and
Connecting
to the
speakers are detached from the speaker
speakers from speaker stands as illustrated.
rear
Speakers
stands. Connect the
speaker
cords and assemble the
How to connect the
use
Connect the
cords to the
nals
on
After
speaker
use
connecting
terminals
on
12
speaker
to the stand
appropriate termirear speaker.
the stand
the
speaker
cords to the
the back of each front and
and attach the front and
er
the stand
the back of each front and
When you
To attach the
Speakers
When you do not
rear
speakers
appropriate
speaker
the speak-
rear
to
stands.
To detach the
speaker
from the stand
Connection
Speaker System
Connect the
speakers using
To obtain the best
possible
the
supplied speaker
surround sound,
cords.
adjust
the
speaker parameters (distance, level, etc.).
Front
Speaker
(Right)
Front
Speaker
(Left)
If you feel lack of bass frequency
Connect
an
PREATION
active subwoofer to the
WOOFER PRE-OUT connector
using a monaural audio cord (not
supplied). When you connect an
active
subwoofer, disconnect the
woofer from the SUBWOOFER
speaker
connector.
Active Subwoofer
Center
(Not supplied)
Speaker
Rear Speaker
(Left surround)
Rear
Speaker
(Right surround)
Passive Subwoofer
otes
Be
sure
to match the
speaker
cord to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cords
are
reversed,
the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
Do not disassemble the front cover of supplied speaker.
adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
13
Speaker Positioning
In the
case
of normal
position
use
the 6
front
speakers (2
speakers,
centre
speaker,
2
rear
speakers
and sub-
woofer).
If you want to
subwoofer.
?
?
play
the excellent bass sound, DTS
Front speakers
According to your listening position
speakers to 45 degree.
Centre
speaker
speakers
The centre
?
and front
set up the
speakers
are
digital
for
speakers
ideally
the
surround
equal
same
or
Dolby Digital surround,
distance. And
height.
But
by hearing position
normally place
it above
or
you should connect
a
set up the interval between
below the television.
Rear
speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
room
-
90
size, if the audience is
cm
than the listener 's
near
to the
rear
wall set the
rear
speakers opposite
each
other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Front
Speaker
(Left)
Centre
Speaker
Front
Speaker
(Right)
Rear
Speaker
(Right)
Rear
Speaker
(Left)
Speaker
14
Placement
Example
Speaker Settings
Delay
After you have installed this unit and connected all the
components, you first perform the speaker setup setfor the
optimum sound acoustics according
environment and speaker layout.
tings
to your
In
Dolby Digital
Turn
on
ers
is
Dolby
If not then
equal.
center
the unit.
or
Setting
Pro
Logic
mode it is assumed
that the distance from the listener to each of the
or rear
neously by
1
2 control.
Time
the
setting
delay
speak-
times of the
the sound will be heard simulta-
speakers
the listener.
The interval from the
to the listener. If the dis-
speakers
tance from the listener to each
Press AMP and press SPK MODE
The current
speaker
the remote
on
mode will appear in the
Display
the
Dolby Digital and
speaker
time of each
speaker is the same, in
Dolby Pro Logic mode the delay
is
follows
as
In
Dolby Digital mode
delay time : 0 5ms
Rear delay time: 0
15ms
In Dolby Pro Logic mode
Centre delay time : cannot be set
If the rear delay time is set in Dolby Digital mode, in the
Dolby Pro Logic mode the delay time will be automatically set.
The delay time is 1 msec per 30 cm.
If the centre and rear speakers are further than the front
speakers from the listener, the delay time will be at
Window.
Centre
~
~
3
Press
desired
/
on
the remote control to select
speaker.
Each time you press these buttons, the sound
changed in the following order;
mode is
FRNT(FRONT)
→
CENT(CENTER)
→
REAR
→
WOOFER...
Press
/
on the remote control to select
desired mode.
4
Depending
one
speaker type, you
following speaker types.
on
of these
LARGE: Select this when
can
fully
minimum.
select
connecting speakers
that
(A)
L
R
C
reduce sounds below 80 Hz.
SMALL: Select this when
cannot
can
your
fully
connecting speakers
DC
that
DF
reduce sounds below 80 Hz.
When this is
selected, sounds below
SW
80 Hz
are
sent to
DS
the subwoofer.
NONE: Select this when
When this is
SL
no
speakers
selected, sounds
are
are
SR
(B)
connected.
sent to the front
speakers.
YES/NO: Select the desired
subwoofer is connected
5
Repeat
ers are
or
depending
on
whether
a
not.
Surround
the above steps 3 and 4 until the
all set to the desired mode.
speak-
ote
When the
selected
the
6(5.1) CH INPUT is
speaker setting mode can
not be selected.
as an
input
source,
delay
time
If the distance of DS is
setting
longer than the DF in
figure,
Delay Time as 0ms.
Otherwise, change the setting according to the below.
Ex) If the distance from front speakers to the listener is
3 m and from rear speakers from the listener is 1.5 m,
in the Dolby Digital mode the rear delay time is 5 msec.
3m (DF)
1.5m (DS)
1.5m (B)
1.5m (B)
150cm / 30cm
5msec
the left
equal
-
or
=
=
In
to
set the Surround
=
Dolby Pro Logic II (Surround delay time):
Logic: 15 30msec
Pro
~
Movie: 10
Music: 0
~
Matrix: 0
Centre
25msec
~
15msec
~
15msec
delay
time
setting
If the distance of DF is
(Dolby Digital
mode
only)
to the distance of DC in
equal
figure, set the Centre Delay Time as 0ms.
Otherwise, change the setting according to the table
the left
below.
Ex)
er
If the distance from the front
is 3m and from the centre
speakers to the listenspeaker to the listener is
2.4m, the centre delay time is 2msec.
3m
(DF)
(A)
60cm
-
2.4m
(DC)
/ 30cm
=
=
60cm
(A)
2msec
15
SOUNDAJTME
Delay
Time
Setting (Cont'd)
C WIDTH
Setting the delay time in the
Dolby Digital and Dolby Pro
Logic (II) mode
The current surround
time appears in the
delay
Display
Window.
2
Press
3
If
/
to
change
the
time.
delay
posispeaker and the left/right
speakers over a range of eight steps. Step "3" uses a
combination of all three front speakers to give the best
vocal imaging and most seamless soundstage presentation, and is recommended for most recordings. Step
"0" places all centre sound in the centre speaker. Step
"7" places all centre sound equally in the left/right
speakers, just as in conventional stereo.
tioned between the centre
Press AMP and DELAY.
1
DIMENSE
is
setting
complete,
(Center Width)
This control allows centre-channel sounds to be
press DELAY.
(DIMENSION)
This control allows the
user
to
gradually adjust
sound field either towards the front
or
the
rear.
the
This
can
be useful to
ote
You
can
adjust the center delay time only
delay time appears.
in the
Dolby Digital
mode and its
the Sound Effects in the
Setting
Music mode of
Dolby
Pro
help achieve the desired balance from all
the speakers with certain recordings that may contain
either too much or too little spatial effect. Step "0" is the
recommended setting, which has no effect on the
sound. Steps 1, 2, and 3 gradually move the sound forward, and steps --1, --2, and --3
move
the sound
towards the surrounds.
PANOR
Logic (II)
(PANORAMA)
This control extends the front stereo
image to include
speakers for an exciting "wraparound"
effect with side-wall imaging. It is particularly effective
for recordings which have strong left- or right-channel
the surround
1
Press AMP and press
select the Music mode.
repeatedly
to
Each time you press these buttons, the sound
changed in the following order;
mode is
PRO LOGIC
PLII MATRIX
2
Press
→
PLII MOVIE
→
PLII MUSIC
→
...
DELAY.
The current surround
delay
time appears in the
Display
Window.
3
Press
/
to select
C WIDTH
4
a
desired Sound mode.
Each time you press the
in the following order;
Press
→
/
DIMENSE
to
→
change
/
button, it is changed
PANOR
...
the steps.
CWITH:0~+7
DIMENSE:-3~+3
PANOR
5
16
If
setting
:
is
ON/OFF
complete,
press DELAY.
elements in the mix, as these are detected and
by the Panorama process.
tuated
accen-
Sound Level
You
can
Test Tone
set the sound level of the desired channel.
Press AMP and press LEVEL
1
on
the remote
control.
2
The level indicator will appear in the
Display
Press
speaker
/
to select
a
desired
Each time you press the
in the
/
Window.
This function allows you to can easily adjust the sound
balance of the speakers from the listener's position.
Select the test tone mode
1
A hiss noise
to set.
speakers
button, it is changed
FL
(Front Left) → C (Centre) → FR (Front Right)
(Surround Right) → SL (Surround Left) →
SW (Subwoofer) → FL (Front Left)
(see
3
p.
2
speaker setting(NONE
or
NO), Centre,
Subwoofer channel will not be selected.
15).
Press
You
adjust the sound level while the test
operating. First press LEVEL then press
/
the
buttons, so that the sound level from
all the speakers is same from the listener's
position.
to
adjust the sound level
(-6dB +6dB)
selected channel.
Repeat step
4 the
other
2-3 and
adjust
the sound level of
During the
paused
be
of the
~
can
tone is
?
/
→
...
ote
to the
out for 2 seconds from each
following order;
(Front Left) → C (Centre) → FR (Front Right)
(Surround Right) → SL (Surround Left) →
SW (Subwoofer) → FL (Front Left)
→
...
or
comes
in the
SR
SR
Surround
TEST
FL
following order;
According
by pressing
TONE.
3
If
setting
is
tone, if you adjust the sound
in the current speaker channel.
test
complete,
level, it will
press TEST TONE.
channels.
5
If
setting
is
complete,
press LEVEL.
otes
When the
6(5.1)CH
is selected
as an
input
source, the Test
Tone function does not work.
According
to the
tone of the
(see
p.
speaker setting(NONE or NO), the
corresponding channel is not available.
test
15).
17
SOUNDAJTME
Mini
Glossary
for Sound Mode
(II)
Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources bearing the trademark such
as
ers
discs, DVD and compact discs, etc. DTS Digital Surround delivup to 6 channels of transparent audio(which means identical to
the
original masters) and results in exceptional clarity throughout a
degree sound field. The term DTS is a trademark of DTS
Technology, LLC. Manufactured under license from DTS
Technology, LLC.
true 360
Dolby
Pro
II creates five full-bandwidth
Logic
from two-channel
sources.
This is done
using
output channels
an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
MOVIE mode:
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
The
Dolby Digital surround format lets you enjoy up to 5.1(or 6)
digital surround sound from a Dolby Digital program
source. If you play DVDs with
mark, you can enjoy even
better sound quality, greater spatial accuracy, and improved
dynamic range.
5.1-channel sound.
channels of
"
MUSIC mode:
"
The Music mode is for
and
provides
vides
with any stereo music recordings,
sound space. The Music mode
deep
includes controls that allow the sound to be tailored to individual
listening
When
use
wide and
a
playing recordings of live music and classic, this mode proa feeling similar to actually being in a small concert hall.
tastes.
MATRIX mode:
The Matrix mode is the
same as
the Music mode
directional enhancement
enhance
When
a
playing recordings of live music and classic, this mode provides
feeling similar to actually being in a large concert hall.
provides
a
three dimensional effect similar to that of
except that the
off. It may be used to
seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause dis-
turbing
This mode
mono
logic is turned
signals by making them
surround
signals
from
"cure" for poor FM stereo
audio to mono.
a
a logic decoder. The
reception may be simply
ultimate
to force the
movie theater.
SURROUND OFF
(2CH STEREO)
right speakers and subcompletely bypass
the sound field processing. This allows you to play any source
using only the front left and right speakers and subwoofer. You can
select SURROUND OFF by pressing BY-PASS on the remote
Outputs
the sound from the front left and
woofer. Standard two channel
(stereo)
sources
control.
Display
This
display
Information about External
appears
depending
UNLOCK DISPLAY
CHANNEL DISPLAY
on
the
change
of the external
18
digital input signal.
appears when the problem gets in external digital input while normally operating in optical or coaxial function. It could be displayed instantaneously according to the external
system quality while operating in switching audio
or
appears when Audio coding mode is changed
or the function mode is switched.
when the stream information is
changed
1+1
ch1, ch2
1/0
C
2/0
L,R
3/0
L,R,C
2/1
L, R, S(Mono Surround)
2/2
L,R,Ls,Rs
3/1
L, R, C, S(Mono Surround)
3/2
L,R,C,Ls,Rs
.1
Digital Input Signal
LFE
signal,
no
LFE
signal
or
in
skip,
open and channel
up/down.
Sound Mode
You
Adjusting Dynamic Range
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Press SURR. repeatedly until the sound mode you want
appears in the display window as below.
Each time you press SURR., the sound mode is
in the following order;
changed
PRO LOGIC
→
HALL 1
→
HALL 2
When PCM indicator is
display
THEATER
→
only displayed
in the
PRO LOGIC
→
PLII MOVIE
→
PLII MUSIC
function available 2-channel mode
→
PLII MATRIX
2
Press D.RANGE
on
the remote control.
The DRANGE ON indicator appears for three seconds in
the Display window.
Press D.RANGE
once
again.
The DRANGE OFF indicator appears for three seconds in
the Display window.
Source Selection
....
You
only)
can use
VCRs
or
other units connected to the VIDEO1,
VIDEO2, DVD, TV, COAXIAL connectors
For your reference
You
1
window:
Each time you press
PL II button, the sound mode
changed in the following order;
?
playing the Dolby Digital Source in Surround
(Dolby digital, Dolby Pro LogicII movie, Dolby Pro
LogicII music and Dolby Pro LogicII matrix) you can turn
down the audio volume, by adjusting the dynamic range
of the playback signal for the balanced sound.
mode
...
is
(This
When
identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
tor. Refer to the owner's manual
can
-
-
information
on
the
on
FUNCTION/JOG dial
input
OPTICAL connecthe unit for further
operation.
Press FUNCTION
desired
or
supplied with
the remote control
on
the front
panel
or
turn the
to select the
source.
-
DVD: To select
INPUT
a source
VIDEO 1: To select
otes
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
VIDEO 1 INPUT
Sound Mode is not
applicable
when
headphone
VIDEO 2 INPUT
is used.
TV: To select
INPUT
rear
panel
DVD
a source
connected to the
rear
panel
connected to the
rear
panel
jacks.
VIDEO 2: To select
frequency).
connected to the
jacks.
a source
jacks.
a source
connected to the
rear
panel
TV
jacks.
Tone Control
Selecting
During
a
listening
session you may wish to
BASS and TREBLE to suit your
1
listening
Press AMP and press TONE
3
4
tastes.
Press
/
Display
to select the BASS
or
Window.
TREBLE
mode.
level of the audio.
Repeat step
To utilize the
Dolby Digital mode you must have a digital
properly connected to this unit.
Connect the digital outputs from DVD and HDTV
receivers to the OPTICAL or COAXIAL inputs on the
rear panel. In order to provide a backup signal and a
source for analog stereo recoding, the analog outputs
provided on digital source equipment should also be
connected to their appropriate inputs on the rear panel
of the unit.
Press ENTER and press
mode.
Digital Source
source
the remote
on
a
the
control.
The word TONE will appear in the
2
adjust
(-10dB
2-3 and
/
~
adjust
to
adjust
+10dB)
the
the level of the other
When
playing a digital source such as DVD, first select
analog input (DVD) using the remote control or frontpanel controls to feed its video signal to the TV monitor
and to provide its analog audio signal for recording.
Next, select the digital input connected with the DVD
player by pressing INPUT on the remote control to
choose either of the OPTICAL or COAXIAL inputs, as
they appear in the Display Window.
its
ote
The Optical
input function is available only when
Sampling Frequency is 32 48kHz.
(PCM: 92kHz)
other unit's
the
~
19
SOUNDAJTME
OSD Menu
Settings
The
OSD(On-screen display) menu allows you to persetup procedures easily. In most situations,
you will only need to set this once during the installation
and layout of your home theater, and it rarely needs to
be changed later.
form the
Press OSD
1
on
1
When
selecting
Press
/
INPUT
the INPUT SELECT
the remote control to select the
on
ENTER.
SELECT, then press
the remote control.
The MAIN MENU
screen
is
displayed
INPUT SELECT
OSD MENU
INPUT
SELECT
SPEAKER
MODE
SPEAKER
2
Press
cursor
/
on
to the
:
INPUT
:
VIDEO 2
OPTICAL
RETURN TO MAIN MENU
LEVEL
TONE
CONTROL
EXIT
MENU
the remote control to
setting
FUNCTION
to be
move
the
changed.
2
Press
/
desired
the remote control to select the
on
input
function.
Each time you press
/
the sound mode
changed in the following order;
,
3
Press
desired
/
on
the remote control to set the
DVD
setting.
on
the remote
To return to the Main Menu, move cursor to RETURN
TO MAIN MENU and press ENTER.
TV
↔
Press
ips
To exit the Main Menu, press OSD
control.
is
3 INPUT,
audio
↔
/
VIDEO1
on
↔
↔
TUNER
...
the remote control to select the
/
then press
input
VIDEO2
to select the desired
source.
Each time you press
/
the sound mode
is changed in the following order;
,
COAX(COAXIAL)
ANA(ANALOG)
↔
OPT(OPTICAL0
↔
6CH(5.1)
↔
...
INPUT SELECT
FUNCTION
:
VIDEO 2
INPUT
:
OPTICAL
RETURN TO MAIN MENU
ote
When
input
20
a
Tuner
source
(FM, AM) Input
source
will not be selected.
is selected, the
OSD Menu
When
selecting the TONE CONTROL
Press
1
TONE
Settings (Cont'd)
/
on
3
/
one
the remote control to select the
your speaker type, you
following speaker types.
on
of these
ENTER.
LARGE: Select this when
SELECT
SPEAKER
MODE
cannot
fully
CONTROL
EXIT
MENU
that
connecting speakers
that
reduce sounds below 80 Hz.
When this is
LEVEL
TONE
select
connecting speakers
SMALL: Select this when
OSD MENU
INPUT
can
reduce sounds below 80 Hz.
fully
can
SPEAKER
on
Depending
the remote control to select the
CONTROL, then press
Press
desired mode.
selected, sounds below
80 Hz
are
sent to
the subwoofer.
NONE: Select this when
When this is
no
speakers
selected, sounds
are
are
connected.
sent to the front
speakers.
Press
2
/
on
the remote control to select the
YES/NO: Select the desired
desired tone mode.
subwoofer is connected
When
or
depending
on
whether
a
not.
the SPEAKER LEVEL
selecting
TONE CONTROL
BASS
:
0dB
TREBLE
:
0 dB
At the desired tone
3
remote control to
Press
1
RETURN TO MAIN MENU
/
mode, press
adjust the selected
on
/
on
SPEAKER
the remote control to select the
LEVEL, then press
ENTER.
the
OSD MENU
tone
as
INPUT
desired.
SELECT
SPEAKER
MODE
SPEAKER
LEVEL
TONE
CONTROL
EXIT
MENU
otes
The tone level
-10
~
can
be
adjusted
within the range of
+10 dB.
In
general, we recommend the bass and treble to be adjustdB(flat level).
Extreme settings at high volume may damage your speakers.
2
Press
/
desired
on
the remote control to select the
speaker.
ed to 0
When
SPEAKER LEVEL
selecting the SPEAKER MODE
FRONTL
:
FRONTR
:
0dB
CENTER
:
+2dB
REARL
:
REARR:
WOOFER
:
-6dB
-
-
-dB
-dB
0 dB
RETURN TO MAIN MENU
1
Press
/
SPEAKER
on
the remote control to select the
MODE, then press
ENTER.
ote
According
OSD MENU
2
Press
desired
/
on
INPUT
SELECT
SPEAKER
MODE
SPEAKER
LEVEL
TONE
CONTROL
EXIT
MENU
the remote control to select the
speaker.
Surround
(see
3
p.
to the
or
speaker setting(NONE
or
NO), Centre,
Subwoofer channel will not be selected.
15).
Press
/
to
adjust the sound
(-6dB +6dB)
selected channel.
Repeat step
4 the
other
2-3 and
level of the
~
adjust
the sound level of
channels.
SPEAKER MODE
FRONT
:
SMALL
CENTER
:
NONE
REAR
:
LARGE
WOOFER
:
NO
RETURN TO MAIN MENU
21
SETING&ADJUM
with Radio
Operation
Presetting
You
can
ing,
make
that you have turned down the volume.
By using
1
on
Press TUNING MODE twice
until the
frequency
on
the front
band appears in the
panel
Display
Window.
the Remote control
Press FM/AM
1
the Front Panel
By using
30 stations for FM and AM. Before tun-
preset
sure
the Radio Stations
The word FM
or
AM will blink in the
Display
Window.
the remote control to select
desired band.
kHz
STEREO
2
MHz
Press and hold TUNING
2
(
)
or
Turn FUNCTION/JOG dial
on
the front
panel
to
select desired band.
the
on
STEREO
remote control for about two seconds until the
frequency
indication starts to
then
change,
MHz
release.
Scanning stops
when the AV Receiver tunes in
station. "TUNED" appear in the
Display
a
3
Window.
Press TUNING MODE
The word kHZ
or
on
the front
MHz will flash in the
panel.
Display
Window.
STEREO
STEREO
MHz
MHz
Press MEMORY
3
A
on
the remote control.
preset number will blink in the Display Window.
4
STEREO
MEMORY
While the "kHZ"
or
"MHZ" indicator
FUNCTION/JOG dial
desired
on
Press TUNING
(
STEREO
) on the remote
preset number you want.
or
to select the
MHz
5
STEREO
MEMORY
blinks, turn
panel to select
frequency.
MHz
4 control
the front
Press SET/MEMORY
A
preset
on
the
number will blink in the
on
the front
Display
panel.
Window.
MHz
MEMORY
Press MEMORY
5
on
STEREO
the remote control.
MHz
The station is stored.
6 Repeat steps
2 to 5 to store other stations.
6
To clear all the stored stations
Turn FUNCTION/JOG dial
on
the front
panel
to
select the preset number you want.
MEMORY
STEREO
Press and hold MEMORY for about three seconds and
"CLEAR ALL" is
appeared in the Display
MEMORY again, the stations
Window and
then press
are
cleared.
7
ote
If all stations have
already
been entered, the FULL
message will appear in the Display Window for
moment and then a preset number will flash.
To
change
above.
MHz
the
preset number, follow the steps
a
3-5
Press SET/MEMORY
on
the front
panel.
The station is stored.
8 Repeat steps
2 to 7 to store other stations.
as
To clear all the stored stations
Press and hold SET/MEMORY for about three seconds
and "CLEAR ALL" is
appeared
and then press SET/MEMORY
cleared.
22
in the
again,
Display
Window
the stations
are
Operation
with Radio
Other
(Cont'd)
to the Radio
Listening
Sleep
Preset radio stations in the AV receiver's memory first
(see "Presetting the radio stations" on page 22.)
You
1
Press FM/AM
on
2
Setting
automatically
at
a
time.
Press SLEEP to set the desired
The SLEEP indicator and
play
the remote control.
The last received station is tuned in.
Timer
set the AV receiver to turn off
can
specified
1
Operations
sleep
sleep
time.
time appears in the dis-
window.
Each time you press SLEEP the
in the following order.
setting changes
SLEEP 90→80→70→60→50→40→30→20→10→
OFF
STEREO
MHz
Press
2 preset
PRESET(
) repeatedly
to select the
station you want.
Each time you press the button, the AV receiver tunes in
one preset station at a time.
ote
Yo u can check the time remaining before the AV
receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
Dimmer
This function will change the brightness of the display
window on the front panel during in power-on status.
MHz
Press the DIMMER
3
by pressing VOLUME + or
on the remote control or by rotating MASTER
VOLUME on the front panel repeatedly.
Adjust
the volume
To turn off the radio
Press POWER to turn the AV receiver off
another function mode
or
select
(CD/DVD, TV, VIDEO1, VIDEO2).
or
automatic
tuning
in
step
For manual
the front
tuning, press TUNING (
panel repeatedly.
For automatic
(
panel.
)
or
tuning,
Press MO./ST.
"STEREO"
no
The
plug
on
plug ( 3.5mm)
into the
speakers are automatically disconnected
in a headphone (not supplied).
when you
the front
Video
Recording
Select the desired
from VIDEO1 OUT
recording input
mode from
VIDEO2.
noisy
the remote control
stereo
in the
Display
so
that
Window.
effect, but the reception will
Press the button
again
effect.
To
on
1
disappears
There will be
improve.
on
)
Jack
press and hold TUNING
for about two seconds
For your reference
If an FM program is
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the Display
Window.
Connect a stereo headphone
PHONES connector.
2.
or
Mute
Using Headphone
To listen to non-preset radio stations
Use manual
repeatedly.
-
improve reception
supplied antennas.
2
Start video
recording from the VCR connected
jacks on the rear panel of
to the VIDEO1 OUT
this unit.
to restore the stereo
The external unit with video
3 playback.
input
starts
Reorient the
23
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
up when STANDBY-ON button is
a
problem
before
?
The power
plug
is not
Correction
fully
inserted.
insert the unit's power
Fully
?
plug
into
a
power socket.
light
?
POWER button is not ON.
?
?
Connections
?
pressed.
No sound from Front
service.
contacting
Cause
Symptom
LED indicator does not
of
are
faulty
incomplete.
or
Press the POWER button
Make
sure
securely.
the connections
are
function-
ing.
speakers.
?
The MASTER VOLUME
setting
is low.
?T
urn
the MASTER VOLUME clockwise
to increase sound volume.
No sound from
Surround
?
Input
?
Connections
sources are
are
faulty.
faulty
?
incomplete.
or
?
speakers.
speaker.
faulty input
Make
sure
the connections
are
function-
?
The Surround mode is off.
?
Select
?
The Surround
?
Set the Surround mode to "LARGE"
speaker
mode is set to
?
appropriate
Connections
are
faulty
or
incomplete.
?
or
Ordinary
?
The Centre
speaker
Make
sure
?
Select the
?
Set the Centre
mode is set to
"LARGE"
Interference of radio
wave occurs.
the connections
are
function-
ing.
stereo mode is selected.
?
?
Surround mode.
"SMALL".
"NONE" mode.
FM radio sound is
source.
ing.
"NONE".
No sound from Centre
Fix
?
Change
appropriate
or
Surround mode.
speaker
mode to
"SMALL".
the location and direction of
antenna to avoid interference.
abnormal.
AM radio sound is
?T V, VCR
abnormal.
nearby
interferes with AM
loop
?
antenna.
Install antenna away from electric appliIf possible, turn electric appliance
ance.
off.
Recording
can't be per-
?
Beat noise of electric
?
The connections between devices may
not be appropriate.
?
The external devices may not
?R efer to Owner's Manuals of corresponding devices.
formed.
?
wave occurs.
?
perform
properly.
The remote control
does not work
?
The remote control is not
remote
properly.
?
sensor
pointed
at the
?
of the AV Receiver.
There is
an
obstacle in the
path
Check the connections between
Point the remote control at the remote
sensor
The remote control is too far from the
of the
antenna location and direction.
devices.
of the AV Receiver.
?
Operate the
23ft(7m).
?
Remove the obstacle.
?
Replace
AV Receiver.
?
Change
remote control within about
remote control and the AV Receiver.
?
The batteries in the remote control
exhausted.
24
are
the batteries with
new ones.
Specifications
Power
Power
[Genral]
External dimensions
(W
x
H
x
D)
conditions
[FM]
AM
[MW]
kg
360
x
82
344
x
Temperature:
Video
1.0 V
S-video
output
at the bottom
cover)
cover)
mm
5°C to 35°C,
Operation
status: Horizontal
(Y)
(C)
(Y)
(C)
(p-p), 75 Ω, negative sync., RCA jack x 2
(p-p), 75 Ω, negative sync., RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin
0.3 V (p-p), 75 Ω
1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin
0.3 V (p-p), 75 Ω
REF NC
1.0 V
output
input
at the bottom
5% to 85%
87.5
Tuning Range
Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Intermediate
108.0 MHz
-
or
65.0
-
74.0
MHz, 87.5
-
x
1
x
1
108.0 MHz
10.7 MHz
60 dB
150
522
-
-
(Mono)
8,000 Hz
1,611 kHz
or
530
1,610 kHz
-
450 kHz
Stereo mode
70W+70W(8Ωat1kHz,THD10%)
Front: 70W + 70W (THD 10 %)
Surround mode
[Amplifer]
5.9
Operating
Operating humidity
Video input
S-video
(labeled
(labeled
Refer to main label
Mass
[Video]
[Tuner]
Refer to main label
supply
consumption
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 70W
Inputs
Outputs
VIDEO 1, VIDEO 2, DVD, TV, COAXIAL AUDIO, OPTICAL AUDIO
Surround*: 70W
+
Subwoofer*: 120W
VIDEO 1
70W
(8Ω
(4Ω
at 60
(AUDIO OUT)
(32 Ω, 0.8V)
:
at 1
kHz, THD 10 %)
Hz, THD 10 %)
2 V
PHONES:
MONITOR, WOOFER FRE OUT (2 V)
Front/Rear
Type
Impedance
[Speakrs]
Centre
Speaker
(LHS-A6730T)
2 Way 3 Speaker
speaker
(LHS-A6730C)
2 Way 3 Speaker
8Ω
Sound Pressure Level
83 dB/W
Rated
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight
8Ω
83 dB/W
(1m)
70W
140 W
170x1300x97mm
5.6
Passive Subwoofer
1
(LHS-A6730W)
Way 1 Speaker
4Ω
(1m)
83 dB/W
70W
120 W
140 W
240 W
(1m)
370x126.5x102mm 260x320x372mm
kg
1.7kg
8.4kg
?Audiocable.........................1?Videocable.........................1
[Suplied Acesori ]
Designs
?Coaxialcable........................1?Speakercables......................6
?Remotecontrol......................1?Batteries(AAA).......................2
?AMloopantenna.....................1?FMantenna.........................1
and
specifications
are
subject
to
change
without notice.
25
DV7142FDM_LGEAP
Table of Contents
Introduction
TableofContents..........................2
BeforeUse..............................3-4
PlayableDiscs...........................3
Precautions.............................4
NotesonDiscs..........................4
AboutSymbols..........................4
.5
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
18-19
.
.
.
.
.
.
.
.
.
.
18
.18
Pause.............................19
MovingtoanotherTrack...............19
RepeatTrack/All/Off..................19
Search.............................19
Random...........................19
.
RearPanel................................6
RepeatA-B.........................19
3DSurround........................19
.19
ChangingtheAudioChannel.
OperationwithJPEGDisc...................20
ViewingaJPEGdisc.....................20
MovingtoanotherFile.................20
.
Preparation
Connections.............................7-8
ConnectingtoaTV.......................7
.8
ConnectingtoOptionalEquipment.
BeforeOperation........................9-13
GeneralExplanation......................9
On-ScreenDisplay.....................9-10
InitialSettings........................11-13
11
Initial Settings General Operation
Language..........................11
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................11
Sound.............................12
Others.............................12
ParentalControl......................13
.
.
.
.
.
.
.
.
.
StillPicture.........................20
Toflipthepicture.....................20
Torotatepicture......................20
.20
NotesonJPEGRecordings.
ProgrammedPlayback.....................21
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
MP3/WMADisc.........................21
ProgrammedPlaybackwithVideoCD.
RepeatProgrammedTracks
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.21
.21
.21
.21
AdditionalInformation.....................22
Operation
LastConditionMemory...................22
.14-17
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............14
.
.
.
.
.
.
.
GeneralFeatures........................14
MovingtoanotherTITLE/GROUP.
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
.
.
.14
.
ScreenSaver...........................22
ControllingtheTV.......................22
VideoModeSetting......................22
SystemSelect..........................22
14
Search.............................14
Pause.............................14
Still Picture and
Frame-by-Frame Playback
.
15
SlowMotion.........................15
Random...........................15
RepeatA-B.........................15
Repeat............................15
Reference
Troubleshooting..........................23
SpeakerSettings..........................24
LanguageCodeList.......................25
CountryCodeList.........................26
Specifications............................27
TimeSearch........................15
3DSurround........................16
Zoom..............................16
MarkerSearch.......................16
SpecialDVDFeatures....................16
TitleMenu..........................16
About the
symbols
Indicates hazards
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
DiscMenu..........................16
CameraAngle.......................16
.16
ChangingtheAudioLanguage.
.16
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................16
DVDAudioDiscs........................17
MovingtoanotherGROUP..............17
ViewinganotherPAGE.................17
2
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
Before Use
Playable
Disc-related terms
Discs
Title
DVD video discs
(8cm/12cmdisc)
DVD audio discs
(DVD
video discs
The main film content
or
only)
accompanying
feature content
additional feature content, or music album.
Each title is assigned a title reference number
or
you to locate it
enabling
easily.
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In addition, this unit
can
play
a
DVD±R, DVD±RW,
Kodak PICTURE CD, SVCD, and CD-R or CD-RW that
contains audio titles, MP3, WMA or JPEG files.
Chapter (DVD video discs only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Group (DVD
audio discs
The main audio content
or
only)
accompanying
feature
content or additional feature content, or music album.
Each group is
Notes
--
Depending
the conditions of the
recording equip(or DVD±R/±RW) disc itself,
some CD-R/RW (or DVD±R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
enabling
assigned
you to locate it
a
group reference number
easily.
ment or the CD-R/RW
--
--
Track
(DVD
audio discs,Video CD and audio CD
only)
Sections of
a
picture
or a
musical
audio CD. Each track is
or an
enabling
piece
assigned
on a
a
video CD
track number,
you to locate the track you want.
Scene
On
Notes
Some
on
DVDs and Video CDs
playback operations
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content
some
designed by the software manufacturer,
playback features of the unit may not be available
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
Regional
code of the DVD
is
player
and DVDs
and manufactured
player designed
4
playback of region "4" encoded DVD software. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "4" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
for
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
of video CDs
Types
There
are
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
This DVD
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
with the
functions, or other
still pictures
Moreover,
typical computer-like operations.
of
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
3
INTRODUC
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
The
setting up the unit
The picture and sound of a
When
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
liquids,
contact with the unit for a
leave marks
such
on
Cleaning
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
or
long period
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzine,
light, as there may be a considerable temperature
increase inside the car.
insecticide spray,
as
To clean the cabinet
a
store the disc in its case.
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the exterior surfaces clean
use
the unit. Do not leave rubber
use a
discs
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents such as alcohol,
thinner, as these might damage the surface
or
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD-V
DVD-A
Handling
discs
Do not touch the
Hold the disc
get
on
by
playback
edges
so
that
fingerprints
or
tape
on
the disc.
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD Video discs
DVD Audio discs
Video CDs with the PBC
(playback control)
function.
side of the disc.
will not
VCD1.1
Video CDs without the PBC
function.
the surface.
Do not stick paper
4
VCD2.0
the
on
A section whose title has
applicable only
Notes
symbol display
"
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
(playback control)
Front Panel and
Display
Window
PLAY(2)
playback.
Starts
PAUSE(;)
Pause playback temporarily/ press repeatedly
for frame-by-frame playback.
INTRODUC
STOP(9)
Stops playback.
Reverse Skip/Scan ( Q / S )
Go to beginning of current chapter/track
Power indicator
Lights green when the
DVD player is turned on.
PREVIOUS
or
to
chapter/track.
Press and hold for two seconds for
a
fast
reverse
search.
POWER
Switches the
Forward Skip/Scan ( T / R
Go to NEXT chapter/track.
player
ON and OFF.
)
Press and hold for two seconds for
a
fast forward search.
OPEN/CLOSE ( / )
or closes the disc tray.
Opens
Display
window
Shows the current status of
the
Disc
Insert
ANGLE active
DVD
DVD video disc inserted
DVD A
DVD audio disc inserted
player.
Tray
TITLE
a
disc here.
Remote Sensor
Indicates current title number
CHP/TRK
Indicates current
Indicates total
CD Audio CD inserted
chapter
or
track number
playing time/elapsed
time
VCD Video CD inserted
MP3 MP3
or
PROG.
WMA disc
Programmed playback
active
inserted
RANDOM RANDOM
playback
active
Indicates current
player
function:
Indicates repeat
Playback, Pause, etc.
mode
MP3 VCD
CD DVD A
TITLE
CHP/TRK
PROG.
RANDOM ALL AB
5
Rear Panel
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver,
or
stereo
system.
VIDEO OUT
Connect to a TV with video
inputs.
5.1 CHANNEL AUDIO OUT
Connect to
--
--
--
--
center
a
5.1 channel receiver
speaker
connection
subwoofer connection
front
rear
speakers connections
(surround) speakers connections
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
Connect to
a
TV with Y Pb Pr
(Y
Pb
S-VIDEO OUT
Connect to
OPTICAL
a
TV with S-Video
AC Power Cord
inputs.
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
6
Pr)
inputs.
Plug
into the power
source.
Connections
Tips
Depending
Progressive Scan (ColorStream
If your television is
your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
on
video resolution
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
best connections.
reproduction, connect
jacks to the audio in jacks
the
player's
of your
audio/video equipment.
amplifier, receiver,
See "Connecting to Optional Equipment" on
stereo or
--
--
Make
Player
is connected
system.
PROGRESSIVE SCAN
jacks on the DVD Player
corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
2 the
TV
to
on
--
Set the
Progressive to "On" on the setup
progressive signal, see page 11.
Set the Progressive to "Off" by removing
menu
STOP and hold it for five seconds before
relesasing it.
analog video
for
any disc
from the unit and close the disc tray. See that "no
disc" is displayed on the display window. Then press
does not work with the
Progressive
scan
connections
(yellow VIDEO OUT jack)
or
S-VIDEO
connection.
Video connection
Connect the VIDEO OUT
the video in
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the supplied audio cables.
DVD
Notes
--
to a TV
Make one of the following connections, depending
the capabilities of your existing equipment.
2
Connect the COMPONENT VIDEO OUT/
the
--
Connecting
1
possible.
Connect the Left and
the DVD
directly to the
TV. Tune the TV to the correct video input channel.
Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
sure
1
page 8.
Caution
--
"digital ready"
or
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
System
For better sound
high-definition
television, you may take advantage of the DVD
Player's progressive scan output for the highest
described below.
AUDIO OUT
a
connection
pro)
jack
jack on the DVD Player to
using the video cable (V).
Rear of TV
the TV
on
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
COMPONENT VIDEO /
S-VIDEO
PROGRESSIVE SCAN INPUT
INPUT
Pr
Pb
Y
AUDIO INPUT
R
VIDEO
INPUT
L
S-Video connection
1
2
Connect the S-VIDEO OUT jack
jack on the TV
cable (S).
to the S-Video in
S
C
AV
Video
(ColorStream )
connection
(Best)
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
the
Y
2
the DVD Player
the S-Video
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
Component
1
on
using
corresponding
Pb Pr cable (C).
in
jacks on the DVD Player
jacks on the TV using the
to
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the audio cables.
the DVD
TV
Rear of
DVD
player
Note
If the TV has
an
S-video
input, connect the DVD player
using an S-video cable,
yellow video cable.
with the S-video cable. When
do not connect the
7
PREATION
Connections
Connecting
(Continued)
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
DVD
Player to the
amplifier, receiver,
cables (A).
Right AUDIO OUT jacks on the
right in jacks on your
stereo system, using the audio
audio left and
or
--
--To
Connect
one of the DVD Player's DIGITAL AUDIO
jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
2 (See "Digital
Digital
Audio
see
player's digital output.
Output" on page 12).
Analog
digital
quality.
provides
display,
the best
sound
For this you need a multi-channel
Audio/Video receiver that supports one or more of the
supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
audio formats
connection to
multi-channel A/V receiver
a
(Dolby Digital)
This DVD
Player contains a multi-channel decoder. This
playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
enables
1
Connect the CENTER and WOOFER
Center
and the Subwoofer
speaker
sponding in jacks
on
jacks for the
(C) to the corre-
your receiver.
Connect the Left and
2 (F)
3 (R)
to the
Right FRONT speaker jacks
corresponding in jacks on your receiver.
to the
Right REAR speaker jacks
corresponding in jacks on your receiver.
Sound
Make the
for
settings
Analog
4 Output andappropriate
Speaker Settings the setup
in
menu.
See page 12.
Rear of
Caution:
DVD
Due to the DTS
Licensing agreement, the digital output
DTS digital out when DTS audio stream is
F
player
selected.
Rear of DVD
player
C
Front R
Front L
Center
Rear R
Rear L
Subwoofer
ANA
R
O
X
OPTICAL
A
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
8
R
L
AUDIO INPUT
on-
press AUDIO.
Connect the Left and
Multi-channel sound
multi-channel connection
will be in
the audio format of the current DVD in the
with 6 Channel connectors
OUT
You will need to activate the
A
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
screen
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
1
If the audio format of the
OG 5.1CH
AUDIO INPUT
Amplifier
(Receiver)
Before
Operation
Caution:
the remote control, press the DVD
button to select the device to be operated.
Before
using
General
or
TV
gives
DVD
Some DVDs
numbers
basic instructions for
operating the
Player.
require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the DVD
Player or is not available on the disc.
General
screen.
playback
TITLE
2
displayed on the TV
changed on the menu.
can
be
display operation
Press DISPLAY
during playback.
title
setting
Repeat
item.
For
some
setting
functions,
setting.
Title
Repeat Chapter
Repeat Group (DVD
Repeat
audio discs
Track
audio discs
OFF
an
Feedback Field Icons
GROUP
TRACK
of
be also be used for
number).
CHAPT
AB
status can be
Some items
On-screen
1
Display
(e.g.,
can
press ENTER to execute the
ALL
On-Screen
the
change
The number buttons
Temporary
Explanation
This manual
Press 1/2 to
3
(non-PBC
only)
Repeat
All Tracks
Repeat
A-B
only)
Video CDs and DVD
(non-PBC
Video CDs
only)
Repeat Off
Resume
Action
play
from this
prohibited
or
point
not available
Notes
Some discs may not
Press 3/4 to select
an
The selected item will be
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
on-screen
item.
highlighted.
DVD-V
Items
Function (Press 3/4 to select desired item)
Title Number
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio language
and Digital Audio
Output
Subtitle
Angle
Sound
1 ENG
D
mode
language
5.1 CH
ABC
Selection Method
titles, and skips
Shows the current title number and total number of
to the desired title number.
1/2,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
1/2,or
Numbers, ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Numbers, ENTER
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1/2,or
AUDIO
OFF
Shows the current subtitles language, and
changes the setting.
1/2,or
1/1
Shows the current angle number and total number of
angles, and changes the angle number.
1/2,or
Shows the current sound mode, and
changes the setting.
1/2,or
NORM.
S-TITLE
ANGLE
SOUND
9
PREATION
Before
Operation (Continued)
On-Screen
Display (Continued)
d
DVD-A
Items
Group
Function (Press 3/4 to select desired item)
Number
2/6
Track Number
1 /12
Time search
0:10:15
DVD Audio
Output
1PPCM
mode
Shows the current group number and total number
of groups, and skips to the desired group number.
1/2,or
Numbers, ENTER
Shows the current track number and total number
of tracks, and skips to the desired track number.
1/2,or
Numbers, ENTER
Shows the elapsed playing time.(Display only)
_
Shows the current encoding method, and channel
number, and changes the setting.
5CH
Subtitle
language
Page (or Angle)
ABC
Selection Method
1/2,or
AUDIO
OFF
Shows the current subtitles language, and
changes the setting.
1/2,or
1 /12
Shows the current page (or angle) number and total number
of pages (or angle), and changes the page (or angle) number.
1/2,or
S-TITLE
ANGLE
or
1/1
VCD2.0
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
1/4
Time
0:20:09
Shows the elapsed playing time (Display only)
STER.
Shows the audio channel, and
changes the audio channel.
Audio Channel
Sound
10
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
NORM.
Shows the current sound mode, and
changes the setting.
Selection Method
1/2,or
Numbers, ENTER
--
1/2,or
AUDIO
1/2,or
SOUND
Before
Initial
Yo u
Operation (Continued)
Picture
Settings
set your own Personal Preferences on the
can
player.
TV
Aspect
nected.
Initial
1
DVD-V
Settings
General
Operation
The setup
Displays
above and below the
appears.
Scan
is
English
16:9 Wide: Select when
Disc Menu
French
Rating
German
Disc Audio
4:3
Letterbox
Spanish
Disc Subtitle
4:3
Panscan
Italian
Disc Menu
16:9 Wide
Code
Aspect
Language
Scan
Audio
Output
played
off).
Chinese
Rating
Polish
Country
Hungarian
TV
5.1
Press 3/4 to select the desired item.
well
as
as
While the desired item is selected, press 2, then
3/4 to select the desired
Press ENTER to confirm
items
selection.
additional
Press
or
PLAY to exit the
menu.
Language
Language
Output
Speaker Setup
DVD-V
Progressive Scan
DVD-A
DVD-A
for the disc's Menu, Audio, and
language
DVD-V
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Player to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Subtitle.
Disc Audio
Off
Disc Subtitle
On
Disc Menu
Rating
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 25. If you enter the wrong language
:
The
Country
To select another
TV
5.1
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Code
Language
Progressive
Digital
5.1
Scan
Audio
Output
Speaker Setup
Language
Select
a
Spanish
Caution
Chinese
Polish
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
Hungarian
an
Other--------
to On in error, you must reset the unit.
1)
for the setup menu. This is the
when you press SET UP.
language
Disc Audio
English
2)
Press STOP and hold it for five seconds before
it. The video
French
standard
setting
Rating
German
TV
window.
Spanish
Disc Menu
Code
Remove any disc from the unit and close the disc
on the display
tray. See that "no disc" is displayed
menu
releasing
Disc Subtitle
Country
Output
Speaker Setup
Others
Others
Menu
Scan
Audio
Italian
Aspect
Menu
Language
Progressive
Digital
Disc Audio
Code
Aspect
Menu
code, press CLEAR.
see
Scan
Audio
Others
setting for the
alternate setting(s).
3
setting.
your
4 Some
require
steps.
SET UP, RETURN,
5 setup
you
16:9 wide TV is connected.
will show the current
screen
selected item,
:
a
Code
Progressive
Digital
Other
sides of the
Aspect
Menu Language
Other--------
Speaker Setup
style (Both
cut
Others
Original
back in that
Disc Subtitle
5.1
con-
bars
conventional TV set is
style
picture are
Digital
a
masking
Original
Progressive
Select
a
with
Disc Audio
Menu
Disc
standard 4:3 TV is
images
picture.
connected. The video material formatted in the Pan &
menu
Country
The
a
theatrical
4:3 Panscan: Select when
Press SET UP.
TV
2
DVD-A
4:3 Letterbox: Select when
Italian
visible
on a
output will be restored
to the
picture will once again be
conventional analog TV or monitor.
and
a
Aspect
Menu
Language
11
PREATION
Before
Operation (Continued)
Sound
Others
Audio
Digital
Output
Each DVD disc has
Set the
of audio output
variety
options.
player's Digital Audio Output according to the
a
type of audio system you
use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
The DRC, Vocal, PBC and Auto
be changed.
between On and Off.
Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected
the DVD Player's DIGITAL OUT jack to an amplifier or
other
DTS decoder,
MPEG decoder.
equipment
decoder
or
with
a
PCM: Select when connected to
stereo
amplifier.
The DVD
a
player outputs
Disc Audio
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
Code
Digital
5.1
Audio
Off
Aspect
Language
Digital
5.1
Scan
Audio
Output
Speaker Setup
Others
Dynamic Range Control (DRC)
thanks to
audio
digital
and the
at a lower volume without
technology. However,
quietest ones). Then, you may
losing clarity
listen to
a
movie
of sound. Set
DRC to On for this effect.
Output
Speaker Setup
Vocal
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
the
Set Vocal to On
only
DVD is
The karaoke channels
Speaker settings
DVD-V
Select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 24.)
when
a
multi-channel karaoke
on
the disc will
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
Play
can
ically
DVD-A
playing.
mix into normal stereo sound.
You
5.1
On
Play
Code
48 KHz
Sample Frequency
change
Auto
Sample Freq.
Others
To
Rating
Progressive
possible,
96KHz
Scan
Progressive
PBC
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
Rating
Aspect
Menu Language
On
Disc Menu
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
DOLBY
DIGITAL
TV
On
Vocal
Menu
sounds in the
recording system.
Country
DRC
Disc Subtitle
TV
digital
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
Disc Audio
Country
Dolby Digital
2-channel
can
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equipment with a
Play settings
set up the DVD
starts
If Auto
Play
search
a
play
DVD-V
playing
Player
so a
DVD disc automat-
whenever the DVD is inserted.
mode is set to On, this DVD player will
playback time is long most and then
title that
back the title
automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Disc Audio
Disc Subtitle
R
Disc Menu
Country
TV
Code
Aspect
Language
Menu
Progressive
Digital
5.1
12
Scan
Audio
Output
Speaker Setup
Others
R
Volume
Size
Distance
Test
Return
Note
The Auto
Front L
Rating
0 dB
Large
1 ft
Play
function may not work for
some
DVDs.
Before
Operation (Continued)
Parental Control
Rating
DVD-V
Enter the code of
DVD-V
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
Code
Country
the disc. These
scenes on
scenes are
Disc Audio
Rating
Country
TV
Disc Subtitle
7
Disc Menu
6
Digital
Country
TV
Menu
Code
3
Progressive
5.1
1
Scan
Audio
Speaker Setup
Select
Change
Others
Code
Country
the setup
using
Country
2
step
3
Select
4
Shift
5
6 selection,
1
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
3 of
the
"Rating"
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
"Rating"
is selected, press 2.
tons to create a
personal 4-digit security password.
then press ENTER. Enter the 4-digit password
again and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER.
If you make
4
Select
a
rating from 1
(1) has the
tons. One
Unlock: If you select
unless
an
the code is
Changing
is necessary when
the 4-digit code"
the
4-digit
code
4
Enter the
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
ENTER.
5
Enter
time and veri-
6
Press SET UP to exit the
using the 3/4 butplayback restrictions.
playback restrictions.
Unlock, Parental Control is
play
scenes
scene
Steps
1-2 as shown above to the left
(Rating).
menu.
in full.
scenes
not
will not be
is available
same
on
rating
played
If you
If you
Press ENTER to confirm your
forget your 4-digit
forget
your
password,
code
to clear the current pass-
word, follow the procedure below.
the disc.
1
Press SET UP to
or a
2
Use the Number buttons to enter the
no
5 then press SET UP
4-digit password
changed (see "Changing
below.).
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
If
Note
Confirmation of the
to 8
The alternative must have the
lower
Press ENTER to confirm your country code
then press SET UP to exit the menu.
least
rated
alternative
button and select the
3/4 buttons.
3
1 to 8: Some discs contain
played. Higher
the 3/4 buttons.
Enter the old code, then press ENTER.
Select Change using 3/4 buttons then press
ENTER.
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
using
Follow
not active. The disc will
Ratings
left.
1
has the most
Eight (8)
using 2
using
on
2
mistake before
pressing ENTER, press
CLEAR and enter 4-digit security password again.
a
cursor
second character
2
on
Code is selected, press 2.
the first character
Select
the 3/4 buttons
menu.
Follow
Unlock
Output
Output
Speaker Setup
While
2
Language
Digital
1
4
Aspect
Scan
Audio
Others
5
Rating
Language
Progressive
5.1
8
Code
Aspect
Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
PREATION
US
Disc Menu
are
The Parental Control feature allows
country-dependent.
were
Code Set
Disc Subtitle
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
whose standards
country/area
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 26.).
rating selection,
display
the setup
menu.
6-digit
number
"210499".
The
4-digit password is cleared.
display for a moment.
3
Enter
a new
code
as
"P CLr" appears
shown above to the left
on
the
(Rating).
to exit the menu.
13
Operation
Playing
a
with DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
DVD-V
VCD2.0
DVD-A
the TV and select the video
nected to the DVD
General Features
input
Note
VCD1.1
source con-
player.
available
Audio system: Turn on the audio system and select
the input source connected to the DVD player.
1
Load your chosen disc in the tray, with the
playback side down.
3
starts
automatically.
the TV screen, and playback
If playback does not start,
a
disc has
might
Moving
DVD-V
is
displayed
may be displayed first after
Video CD which offer a menu.
menu screen
DVD
or
than
one
as
title/group,
you
can
follows:
to another CHAPTER/TRACK
VCD1.1
1/3
1 /12
appear
When
a menu screen
1/6
title/group
DVD-A
a
title
disc has
If
more
to another
1 /12
menu
1/3
DVD-A
Press DISPLAY, then press the appropriate num(0-9) to select a title/group number.
instead.
The
the
bered button
on
press PLAY.
In some cases, the disc
When
move
Press OPEN/CLOSE of the main unit to close
the tray.
READING appears
DVD-V
use
Setup menu.
to another TITLE /GROUP
on
Moving
Press OPEN/CLOSE of the main unit to open the
disc tray.
2
Unless stated otherwise, all operations described
the remote control. Some features may also be
loading
a
on a
disc has
more
than
one
chapter
or a
than one track, you can move to another
chapter/track as follows:
Press SKIP/SCAN . or > briefly during
more
playback to select the next chapter/track or to return
beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter/track during DVD
playback, press DISPLAY. Then, press 3/4 to select
the chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
to the
DVD-V
Use the 1 234 buttons to select the title/chapter you
view, then press ENTER to start playback.
want to
Press TITLE
or
MENU to return to the
menu screen.
DVD-A
Use the 1 2
3
4
buttons to select
an
option
you
Note
want, then press ENTER to view the option.
For
two-digit numbers, press
(0-9)in rapid succession.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
menu screen.
operating procedures
depending on the disc.
the menu may differ
Follow the instructions on the each
for
menu screen.
You also may set PBC to Off under setup. See page
12.
Notes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
--
"Parental Control",
DVDs may have a
DVD-V
DVD-A
(see
on page 13).
region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 4 (four).
two seconds
The
player
VCD1.1
or
> for about
during playback.
will
now
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
to select the
3 To exit SEARCH mode, press PLAY.
Note
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
Pause
DVD-V
DVD-A
1 Press PAUSE/STEP
2 To return to
14
VCD2.0
1 Press and hold SKIP/SCAN .
and the exact
using
Search
the numbered buttons
VCD2.0
VCD1.1
during playback.
playback,
press PLAY.
with DVD and Video CD
Operation
General Features
Still Picture and
DVD-V
1 Press PAUSE/STEP
The
2 You
VCD1.1
during playback.
1 To
will now go into PAUSE mode.
advance the picture frame-by-frame
pressing PAUSE/STEP repeatedly
on
the remote
con-
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
repeat the title
second time.
segments.
1 Press SLOW
VCD2.0
Repeat mode,
VCD1.1
during playback.
2 Use the SLOW
U or u
a
to select the
t 1/16, t 1/8, t 1/4
or
t 1/2
OFF
required speed:
(backward), or
(forward).
T 1/16, T 1/8, T 1/4 or T 1/2
3 To exit slow motion mode, press PLAY.
segments.
on
on
screen.
press REPEAT
the TV
the TV
a
screen.
press REPEAT
a
third time.
screen.
Repeat Track/Group/Off
Repeat Track icon appears
repeat the group
second time.
The
3 To exit
Repeat mode,
-
2 To
repeat the disc
second time.
Repeat
press REPEAT
the TV
on
press REPEAT
on
the TV
screen.
a
third time.
screen.
press REPEAT.
currently playing,
Repeat Track icon appears
The
screen.
Repeat Track/All/Off
repeat the track
The
the TV
currently playing,
Repeat Off icon appears
The
1 To
on
Repeat Group icon appears
Video CDs
Notes
Slow motion playback in reverse is not applicable for
Video CD.
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
the TV
repeat the currently playing track, press REPEAT.
2 To
will enter SLOW mode.
player
1 To
-
on
currently playing,
Repeat Off icon appears
The
The
U or u
ALL
Repeat Chapter/Title/Off
Repeat Title icon appears
3 To exit
DVD Audio Discs
DVD-A
TRACK
Repeat Chapter icon appears
2 To
The
DVD-V
-
VCD1.1
repeat the currently playing chapter, press
The
Note
The
GROUP
VCD2.0
REPEAT.
by
trol.
Slow Motion
DVD-A
TITLE
DVD Video Discs
player
can
DVD-V
CHAPT
Frame-by-Frame playback
VCD2.0
DVD-A
Repeat
(continued)
on
the TV
currently playing,
All icon appears
the TV
on
screen.
press REPEAT
a
screen.
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
3 To exit
Random
Karaoke DVD
VCD2.0
VCD1.1
The
1 Press RANDOM
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears on the display window.
To return to normal playback, press RANDOM until
"RANDOM" disappears on the display window.
The unit
2
Note
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 12.
Time Search
Tips
By pressing SKIP/SCAN
>
the unit selects another title
Random playback.
during Random playback,
(track) and resumes
OnaVideoCDwithPBC,youmustsetPBCtoOffon
the setup
page 12.
Repeat
menu
A-B
A*
to use the Random function. See
DVD-V
AB
To repeat
a
DVD-A
VCD2.0
1 Press DISPLAY
A
*
"
appears
briefly
2 Press REPEAT A-B
on
appears
on
during playback.
the
The
playing
on-screen
at
dis-
screen.
The Time Search box shows the
elapsed playing time of the
current disc.
2 Within 10 seconds, press 3/4 to select the Time
Search icon in the on-screen display.
The "-:--:--" appears in the Time Search box.
VCD1.1
onds from left to
right
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
a
title
or
the TV
again
4 Within 10
group:
1 Press REPEAT A-B at your chosen
"
-:--:--
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
OFF
sequence in
0:20:09
The Time Search function allows you to start
any chosen time on the disc.
play
Note
This function only works with DVD Karaoke discs and
video CD without PBC.
DVD-V
starting point.
screen.
at your chosen end
seconds, press ENTER to confirm the start
time.
Playback
an
starts from the selected time on the disc. If you enter
playback will continue from the current point.
invalid time,
point.
"A B" appears
briefly on the TV screen, and the repeat
sequence begins ("AsB" appears the display window).
3 To cancel the sequence, press REPEAT A-B.
15
OPERATION
with DVD and Video CD
Operation
General Features
3D Surround
This unit
produce
can
VCD2.0
DVD-V
a
The Marker number will be erased from the list.
3D SUR
NORM.
VCD1.1
Press CLEAR.
3
(continued)
4
3D Surround effect, which
playback from two
To remove the MARKER SEARCH menu, press
SEARCH.
5
simulates multi-channel audio
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
a
or
during playback.
2 To turn off the 3D Surround effect, press SOUND
again to select "NORM".
DVD-V
VCD2.0
DVD-A
VCD1.1
during playback
or
If you press ZOOM repeatedly, the
increases up to six steps.
2 Use the 1 234 buttons to
still
playback
press the appropriate number button to select an option.
use the 1 234 buttons to highlight your selection,
then press ENTER.
to acti-
magnification level
If the current title has
move
through
normal
playback
or
menu can
and subtitle
return to
3 To
remove
function may not work for
some
DVDs.
DVD-V
VCD2.0
VCD1.1
2 To
You can start playback from a memorized
nine points can be memorized.
To enter a mark, follow these steps.
point. Up
to
memorize.
DVD-A
again.
DVD-V
is
displayed.
the disc menu, press MENU
on
the TV
again.
points
on a
Changing
Marked Scene
disc
playback,
The MARKER SEARCH
menu
will appear
on
a
the
the Audio
the
display.
Language
D
1PPCM
5.1 CH
5CH
VCD2.0
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
will appear
on
Subtitles
DVD-V
DVD-A
ABC
Press S-TITLE repeatedly during
different subtitle languages.
To clear a Marked Scene
1 During disc playback, press SEARCH.
the
a
dif-
VCD1.1
a
dif-
1 ENG
playback
to see the
screen.
Press 1/2 to select the Marker number that you want
to erase.
DVD-A
scene.
SEARCH.
menu
on
ferent audio channel
4 To remove the MARKER SEARCH menu, press
The MARKER SEARCH
angle appears
a
screen.
Marker
3 Press ENTER.
will start from the Marked
camera
Press AUDIO repeatedly during playback to hear
ferent audio language or audio track.
press SEARCH.
2 Within 10 seconds, press 1/2 to select
number that you want to recall.
Playback
recorded at different
scenes
1 ENG
DVD-V
a
1/1
DVD-V
briefly.
screen
1 to enter up to nine Marker
Repeat step
To Recall
DVD-A
Angle
If the disc contains
disc.
16
and
The number of the current
The Marker icon will appear
2
may appear.
angles, spoken language
chapters for the title.
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
During disc playback, press MARKER when
playback reaches the spot that you want to
During
menu
camera
the title menu, press TITLE
menu
remove
Camera
1
menu, the menu will appear on the
MARKER SEARCH
1/9
2
a
1 Press MENU.
The disc
Marker Search
list
options,
Disc Menu
zoom
DVD-V
Otherwise, the disc
screen.
the zoomed
Note
1
DVD-A
1 Press TITLE.
paused image.
The
Title Menu
2 The
resume
the contents of DVD discs:
Checking
Or,
picture.
the
DVD-A
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
vate the Zoom function.
3 Press CLEAR to
DVD-V
Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
home theater system.
1 Press SOUND to select "3D SUR"
Zoom
2 and 3 to erase additional Marker
Repeat steps
numbers.
Note
If
appears, the feature is not available
on
the disc.
Operation
with DVD and Video CD
DVD Audio Discs
DVD-A
Viewing
another PAGE
Since DVD Audio discs
DVD Audio is
building on the success
of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A
DVD Audio disc can be identified by the DVD audio logo
on the disc jacket or on the disc itself.
a new
disc format
DVD Audio
can provide higher quality stereo than Audio
sampling rate of up to 192kHz (compared to
44.1kHz for CDs). DVD Audio digital sound can be
delivered with up to 24 bits of data (compared to 16 bits
for a standard CD).
CDs with
A
a
typical DVD Audio disc contains up to seven times the
capacity of a CD. This additional space is used for
data
can
hold
DVD-A
a
1 /12
lot of content, there
on the disc.
various ways to see what's available
1 Press DISPLAY during playback.
are
2 Press 3/4 to select
3 Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to disc
because the information available depends upon the way the
disc
was
created.
Note
Since the
the
authoring
display choices might
you're playing.
on-screen
the disc
of DVD Audio Discs varies,
some
music, either Advanced Resolution multi-channel sound
quality that is closer to the artist's master recording or
for longer recordings. Many DVD Audio discs contain
on-screen text, such as artist biographies, playlists, or
lyrics. Some DVD Audio discs contain photo galleries or
video clips.
Note
To
enjoy
maximum sound
DVD Audio, you must
quality
and surround effect of
analog audio output
(5.1CH AUDIO OUT jacks on the DVD Player). If you use
the DIGITAL OUT (OPTICAL or COAXIAL) for your audio
connection, the sound will only be similar to CD-quality
sound even though you're playing a DVD Audio disc.
Moving
use
5.1 channel
to another GROUP
1/6
DVD-A
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access different groups during playback via the on-screen display.
1 Press DISPLAY
during playback
Group icon.
on
in
stop mode.
2 Press 3/4 to select
3 Press 1/2
or
the numbered buttons
(0-9)
to select a
group number.
Note
Sometimes the author of the disc creates hidden
tent that can
only
be accessed
If the lock icon appears
on
by entering
a
of
not be available for
con-
password.
the TV screen, enter the
password (sometimes you'll find it on the disc's jacket
cover or on a web site). This password control isn't dicit is a function of the disc.
tated by your DVD Player
Since the authoring of DVD Audio Discs varies, some of
the on-screen display choices might not be available for
the disc you're playing.
---
17
OPERATION
with Audio CD and MP3/WMA Disc
Operation
Playing an Audio CD and MP3/WMA Disc
CD
MP3
The DVD
Notes
MP3/WMA
Insert
play
Recordings
files that have
The
player
can
not read an MP3 file that has a file
extension other than
".mp3".
a
About
WMA(Window Media Audio)
An WMA file is
technology.
WMA(Windows
compression of
MP3 WMA
JPEG
Press 3/4 to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to
choice menu.
1.
2.
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
Microsoft audio
Media
3
4
Press 3/4 to select
ENTER.
compatibility
track then press PLAY
or
is
-
-
CD Creator", which creates an ISO9660 file system.
single session disc requires MP3/WMA files in the
A
6.
File
no
MP3/WMA file in the 1st
or use a new one.
names
and must
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
Press MENU to
player
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
Playback starts.
During playback,
Press TITLE to
with this
follows:
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy-
the disc
a
offers double the audio
the MP3 format.
first track. If there is
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
Audio)
compression
-
3.
MP3 WMA
as
22.05
to the MP3/WMA-JPEG
move
a
MP3/WMA Disc
limited
2
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
right.
on
disc and close the tray.
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
1
Recordings
An MP3 file is audio data
MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
can
MP3/WMA
About MP3
WMA
Player
on
move
to the
previous page.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Program
CD
Program
MP3 WMA
TRACK01
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK 5.mp3
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
STER.
NORM.
Audio CD
menu
0: 56: 18
Clear All
TRACK 8.mp3
00:00
1
If you
are
use
MP3/WMA
in
return to the
To stop
5
18
a
menu
file list and want to return to the Folder
the 3/4 to
and
highlight
previous menu screen.
playback
at any other
optimal
automatically
types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
OFF
Tip
list,
are
of recordable disc formats
TRACK 4.mp3
TRACK05
Pre-recorded DVDs
set to these standards. There are many different
TRACK 3.mp3
TRACK04
playback quality.
press ENTER to
time, press STOP.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
always
be
sought
from the
copyright
owner.
right
with Audio and MP3/WMA Disc
Operation
Pause
CD
MP3
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
to another Track
Moving
Press SKIP/SCAN .
or
>
Press SKIP/SCAN . twice
the previous track.
case
MP3
WMA
briefly during
or
to return to the
starting point.
The
Repeat icon and "A
2 Press REPEAT A-B
step back
to
briefly
to
The
of audio CD, to go directly to any track, enter
using the numbered buttons (0-9)
Repeat Track/All/Off
CD
MP3
WMA
on
the
menu screen.
at your chosen end
Repeat icon and "TRACK" appears
the
on
Repeat icon and "OFF" appears
3D Surround
This unit
more
menu
can
repeat all tracks
on a
disc, press REPEAT
Repeat icon and
"ALL" appears
on
the
Repeat mode,
Search
CD
MP3
produce
channel audio from
press
menu screen.
a
3D Surround effect, which
a
or
to listen to multi-
home theater system.
during playback.
2 To turn off the 3D Surround effect, press SOUND
again to select "NORM.".
a sec-
the
third time.
a
menu screen.
Press AUDIO
the Audio Channel
CD
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
different audio channel
WMA
1 Press and hold SKIP/SCAN .
two seconds
The player will
on
play,
menu screen.
press REPEAT
Repeat icon and "OFF" appears
the
point.
screen,
CD
speakers normally required
Changing
3 To cancel
on
1 Press SOUND to select "3D SUR"
ond time.
The
appears
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five
repeat the track currently playing, press REPEAT.
The
"
again
screen.
2 To
*
3 To exit the sequence and return to normal
REPEAT A-B again.
during playback.
The
sen
Repeat icon and "A B" appears on the menu
and the sequence begins to play repeatedly.
the track number
1 To
CD
To repeat a sequence.
1 During disc playback, press REPEAT A-B at your cho-
press
CD
A-B
The
playback to go to the next track
beginning of the current track.
In
or
(Continued)
> for about
or
during playback.
now
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
to select the
Search
speed and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH mode, press PLAY.
Random
CD
1 Press RANDOM
MP3
WMA
during playback
or
when
playback
is
stopped.
The unit automatically begins Random Playback and
RANDOM or "RAND." appears on the display window
and menu screen.
2 To return to normal
edly until RANDOM
display window and
press RANDOM repeat"RAND." disappears on the
playback,
or
menu screen.
19
OPERATION
Operation
Viewing
with JPEG Disc
JPEG disc
a
Moving
JPEG
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
This DVD
Insert
a
appears
on
>
once
during viewing a
previous file.
Still Picture
1 Press PAUSE/STEP
menu
or
to advance to the next file or to the
picture
disc and close the tray.
The MP3/WMA-JPEG choice
TV
to another File
Press SKIP/SCAN .
the
screen.
slide show.
during
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
The
player
will
now
MP3 WMA
To
JPEG
2
Press 3/4 during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
menu
appears
on
the TV
flip the picture
To rotate
screen.
Press 1/2
JPEG
picture
Folder1
Folder2
to
flip
the
picture
during showing
clockwise
or
a
picture
to rotate the
counter clockwise.
Folder3
Folder4
Folder5
Notes
Folder6
Folder7
on
JPEG
Recordings
Folder8
Slide
Speed
Depending
Off
upon the size and number of the JPEG
a long time for the DVD player to
files, it could take
3
Press 3/4 to select
a
folder, and ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice
menu.
If you
are
in
a
file list and want to return to the Folder
the 34 buttons
on
the remote to
highlight
and press ENTER to return to the
"
previous
menu screen.
If
want to view a
you
4 highlight
particular file, press
file and press ENTER
the file proceeding starts.
a
or
Viewing
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
3/4 to
PLAY.
to move to
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip
are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
There
then press 3/4 to select the
option
you want to
use, and press ENTER.
To stop viewing at any other time, press STOP.
The JPEG menu appears.
20
pixels
and burn another disc.
on
the disc should
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the ".jpg" extensions
when
copying
rename
them
into the CD
layout.
by
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
".jpg" extension will not be able to
player. Even though the files are
JPEG image files in windows explorer.
names
shown
Picture2.jpg
5
reduce the resolution of the JPEG files
Some disc may be incompatible due to different
recording format or condition of disc.
be read
Picture1.jpg
Speed
---
be less than 650.
File
move
Folder1
5/32
big
If the files have
to the next page.
Press MENU to move to the previous page.
JPEG
too
Total number of files and folders
use
"
are
to less than 2 mega
Tip
list,
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
screen
without
this DVD
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
with Video CD
Note
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 12.
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA Disc
The
MP3
during playback or in
Program Edit mode.
mode to enter the
the stop
E
The
mark will appear to the right of the word
on the right side of the menu screen.
Program
OPERATION
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
menu
playback
Program
VCD
is
stopped.
will appear.
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Program
TRACK 4
Edit mode;
TRACK 5
TRACK 6
E
the
mark will
Select
2
disappear.
TRACK 7
track, then press ENTER
a
selected track
the
on
Clear All
TRACK 8
Program
to
place
the
list.
Note
2 to
Repeat step
Program list.
3
place
E
Program
CD
additional tracks
the
Program
MP3 WMA
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 7
TRACK 7.mp3
Clear All
TRACK 8
0: 56: 18
STER.
Audio CD
00:00
Clear All
3
MP3/WMA
menu
programmed track you selected last is highlighted
on
5 playing.
from
with
left.
resume
normal
Tracks
currently playing,
Repeat icon and "TRACK" appears
The
press REPEAT.
on
the
menu
screen.
To repeat all tracks on the program list, press
REPEAT a second time.
Repeat icon and "ALL" appears on the menu screen.
Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
The
Press TITLE to
To cancel
to the next page.
Press MENU to move to the previous page.
move
Press PLAY to start.
6 Playback begins
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks
have played once.
resume
playback,
To
To repeat the track
Press 3/4 to select the track you want to start
To
on
Repeat Programmed
menu
the program list.
7
"Programmed Playback
Audio CD and MP3/WMA disc"
"PROG." indicator disappears in the display window.
OFF
Press 2.
The
menu.
playback
4 programmed playback,
press PROGRAM.
TRACK 3.mp3
TRACK 8.mp3
NORM.
Follow steps 2-6 of
Program
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
PROGRAM to exit the
or
TRACK 2.mp3
TRACK 4.mp3
TRACK 6
Press RETURN
3
E
TRACK 8.mp3
TRACK 5
4
on
normal
select
a
playback
on
the
Program list
programmed
(or MP3/WMA) list
and then press ENTER.
"PROG." indicator disappears
on
the
a
menu screen.
Track from
Program
List
1 Press PROGRAM
MP3/WMA disc
Program
from
track of CD
Erasing
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
the
1 Follow
steps
List"
as
Program list.
Complete Program
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear All", then press ENTER.
The
complete Program for the disc
The programs
are
will be erased.
also cleared when the disc is removed.
21
Additional Information
Last Condition
DVD-V
This
DVD-A
VCD1.1
memorizes the
player
Video Mode
Memory
CD
DVD-V
user
settings
Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
means
If you load a disc that has its settings memorized, the latest stop position is automatically recalled.
player.
video mode.
To change the video mode, press and hold DISPLAY
about 3 seconds during disc playback. The new video
mode number selected is displayed on the TV screen.
Check whether the video quality has improved. If not,
Notes
--
VCD1.1
With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That
for the last disc
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
--
Setting
VCD2.0
DVD-A
Settings are stored in memory for use any time.
player does not memorize settings of a disc if
you switch off the player before commencing to play
This
repeat the above procedure until picture quality is
it.
improved.
Video mode
change
sequence:
Screen Saver
MODE1
The
If you turn off the power, the video mode will be back
to initial state (MODE1).
picture
screen saver
DVD
Player
in
appears when you leave the
stop mode for about five minutes.
After the Screen Saver has been
engaged
for about five
minutes, the DVD Player will automatically turn itself off.
Controlling
the TV
Your remote control is
player
as
well
as
capable
of
operating
your DVD
limited functions of LG TV.
Follow the instructions below to operate for your LG TV.
the remote control, press the DVD
TV button to select the device to be operated.
Before
1
using
To switch the remote control mode
ferent
be
device),
sure
(to operate
a
dif-
to press the DVD or TV
MUTE and TV AV buttons
used to operate the
for Video Modes
The video mode setting only works when the
Scan mode is set to "On" in the Setup menu.
TV
on
remote control are
LG TV.
Progressive
Select
When the unit is
shipped
from the
factory,
the remote
control is set to Code 1.
To set the remote control to Code 2, hold down both
on the
the TV button and the number "2" button
appropriate system mode for your
system. If NO DISC appears in the display window,
press and hold PAUSE on the front panel for more than
5 seconds to be able to select a system (PAL, NTSC,
?
This remote control supports two remote control
codes for LG TV: Code 1 and Code 2.
AUTO).
When the selected system does not coincide with the
system of your TV, normal color picture may not be
displayed.
AUTO: Select when DVD
(If
replaced while the remote control
2, the setting will revert to Code 1.)
is set to Code
NTSC:
remote control.
Note
If the remote control does not
TV, try the other code
or use
ly supplied
with the LG TV.
Due to the
variety
operate your particular
the remote control original-
of codes used
by manufacturers,
OUR COMPANY cannot guarantee that the remote
trol will operate every model of LG TV.
Select when DVD
con-
is connected with
player
is connected with
player
is connected with
NTSC-TV.
PAL:
Select when DVD
PAL-TV.
To set the remote control back to Code 1, hold down
both the TV button and the number "1" button on the
player
Multi system TV.
the batteries in the remote control
are
22
MODE1
MODE2: Suitable for playing film based content or video based
material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with comparatively little motion.
System
Remote Control Codes for LG TV
remote control.
Descriptions
→
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information.
or
Setting
MODE3
You must select the
POWER, CHANNEL(E/D), VOLUME (+/-),
The
Detailed
→
Note
or
button first.
2
MODE2
→
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
service.
Cause
Symptom
Correction
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
No
The TV is not set to receive DVD
picture.
signal
output.
window is
lit.)
Select the
on the TV
so
player
cord into the wall outlet
appropriate video input mode
the picture from the DVD
appears
on
the TV
Connect the video cable
The video cable is not connected
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The Progressive Scan is set to "On" on
the setup menu but is connected to a
standard(analog) television.
Set
The equipment connected with the
audio cable is not set to receive DVD
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
signal output.
The audio cables
are
not connected
on
the TV.
Progressive Scan
page 11).
to "Off"
(see
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The
Digital Audio Output
position.
is set to the
playback picture
is
The disc is
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The
Turn on the equipment connected with
the audio cable.
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
An
unplayable
disc is inserted.
Insert
a
playable
disc.
the disc
(Check
type, color system, and Regional code.)
The disc is
placed upside
The disc is not
The remote control
does not work
properly.
placed
Place the disc with the
down.
down.
within the
guide.
playback
Place the disc on the disc tray
inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
The remote control is not pointed at the
remote sensor of the DVD player.
correctly
change
Point the remote control at the remote
of the DVD player.
sensor
the remote control within 23 ft
The remote control is too far from the
DVD player.
Operate
(7 m).
There is an obstacle in the path of the
remote control and the DVD player.
Remove the obstacle.
The batteries in the remote control
exhausted.
Replace
are
or
side
the batteries with
new ones.
23
REF NC
Speaker Settings
Make the
following settings
for the built-in 5.1 channel
surround decoder.
If you connected speakers to your DVD Player, setting
the Distance lets the speakers know how far the sound
Disc Audio
has to travel to reach your set listening point. This
allows the sound from each speaker to reach the listen-
Disc Subtitle
R
Disc Menu
Code
Digital
Audio
Large
Distance
Scan
(1
Press ENTER to test the
Return
Adjust
Speaker Setup
Select "5.1
Speaker Setup" using
2
While "5.1
setup
is selected, press 2
Press 1/2 buttons to select the desired
Select
3 41 2
speaker.
buttons.
selection
Speaker
speaker that you want to adjust. (Front speak(Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer)
a
ers
Volume
Press 1 / 2 to adjust the output
speaker. (-10dB 0dB)
level of the selected
-
Size
Press 1 / 2 to set
a
mode.
(Large, Small
or
None)
If you have connected the system to a speaker with
a low frequency of 100Hz or below, select "Large."
If you have connected the system to a speaker withfrequency of 100Hz or below, select
out a low
"Small." If you have not connected a subwoofer,
always select "Large" for Front speaker (L/R).
When you do not have
select "None."
Front L/R
speaker's
a
size
certain
can
speaker connected,
be set to
"Large"
or
"Small."
If Front L/R
Center
speaker's
speaker's size
size is set to "Small," Rear and
can be set to "Small" or
"None."
Subwoofer's size
"None".
24
can
signals
be set
only
to
of each
speaker.
signals
Rear
Right (R)
→
→
Front
Rear Left
Right (R)
(L)
Return
button.
3
4 Adjust options by using
cm)
the 3/4 but-
menu.
Speaker Setup"
30.48
the volume to match the volume of test
→
→
tons on the
=
memorized in the system.
Front Left (L)
Center
Others
1
ft
Test
1 ft
Test
Output
at the same time.
0 dB
Size
Language
Progressive
5.1
er
Volume
Aspect
Menu
R
Front L
Rating
Country
TV
Distance
"Large"
or
Press ENTER to return to the
previous
menu.
Language Code
Enter the
(See
appropriate
11).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
25
Country
Enter the
Code List
appropriate
code number for the initial
setting "Country Code" (See
page
13).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and Barbuda
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape Verde
JP
Japan
PL
Poland
VI
Virgin Islands (British)
Virgin Islands (USA)
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Anguilla
Kingdom
Outlying
Islands
Miquelon
City State
Grenadines
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
26
Republic
(French)
Specifications
General
Power
Power
requirements
AC 110-240V
consumption
14W
Dimensions
Mass
(approx.)
,
50/60 Hz
430X48X242mm(wxhxd)
2.34
(approx.)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
(41˚F
to
REF NC
95˚F)
System
Laser
Semiconductor laser,
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1
Vp-p
75
Ω, sync negative, RCA jack
x
1
S-VIDEO OUT
(Y)
(p-p),
(C)0.3V(p-p)75Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output
(digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio output
(optical audio)
3 V
Audio output
(analog audio)
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
Design
and
1.0 V
specifications
are
Manufactured under license from
marks of
subject
to
75
(p-p),
change
75
Ω, negative sync, Mini DIN 4-pin
Ω, Optical
connector
x
x
x
1
1
1
without notice.
Dolby Laboratories. "Dolby", "Pro Logic",
"MLP
Lossless", and the double-D symbol
are
trade-
Dolby Laboratories.
DTS and DTS
Digital Surround
are
registered trademarks of Digital Theater Systems,
Inc.
27
P/NO: 3834RH0024E
Download PDF