LG LH-T550SB Owner's Manual

LH-T550SB JA2ALLA
DVD/CD
RECEIVER
OWNER'S MANUAL
MODEL: LH-T550SB
(Main Unit: LH-T550
Speakers: LHS-55SBS, LHS-55SBC,
LHS-55SBW)
R
Before connecting up, operating or repairing
product, please read this instruction booklet
carefully and completely.
this
P/N: 3834RH0115Y
Precautions
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user
about the presence of uninsulated dangerous
voltage within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric
This
shock to persons.
The exclamation mark within
is intended to alert the
important operating
an
equilateral triangle
about the presence of
and maintenance (servicing)
user
instructions in the instructions
About the
accompanying the
product.
symbols
Indicates hazards
itself
or
Indicates
special operating
Indicates
tips
MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
To
ensure
proper
use
a Laser System.
product, please read this owner's
employs
of this
carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service location (see service procedure).
manual
Performing controls, adjustments, or carrying out procedures
specified herein may result in hazardous radi-
other than those
ation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
(dripping
as
vases,
The
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
appliance is
not intended for use
infirm persons without
and hints for
features of this unit.
making
the task easier.
by young children
or
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
OTES ON COPYRIGHTS:
It is forbidden
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
supervision.
Young Children should be supervised
not play with appliance.
If the
harm to the unit
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
CAUTION:
This DVD/CD receiver
likely to cause
damage.
other material
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
for instructions
to ensure that
they do
appliance is supplied from a cord extension set or electriportable outlet device, the cord extention set on electrical
portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture,
SERIAL NUMBER: The serial number is located on the back
of this unit. This number is unique to this unit and not available
to others. You should record requested information here and
retain this guide as a permanent record of your purchase.
cal
2
Model No.
Serial No.
___________________________________
___________________________________
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
AudioCDandMP3/WMADisc...............21
Playing
an
Audio CD and MP3/WMA Disc
.
.
.
.
.
21
BeforeUse..............................4-5
Pause.............................21
PlayableDiscs...........................4
MovingtoanotherTrack...............21
RepeatTrack/All/Off...................21
Precautions.............................5
NotesonDiscs..........................5
Search.............................21
AboutSymbols..........................5
FrontPanelandRearPanel..................6
JPEGDiscOperation......................22
ViewingaJPEGdisc.....................22
RemoteControlOverview....................7
SlideShow.........................22
StillPicture.........................22
Preparation
Connections............................8-11
TVConnections.........................8
OptionalEquipmentConnections
.
.
.
.
.
.
.
.
.
.
.
.9
Movingtoanotherfile.................22
Torotatepicture......................22
ProgrammedPlayback.....................23
RepeatProgrammedTracks................23
.23
ErasingaTrackfromProgrammeList
23
Erasing the Complete Programme List
DivXDiscOperation.......................24
SpeakerSetup............................25
.
AerialConnections........................9
SpeakerSystemConnection...............10
SpeakerPositioning......................11
BeforeOperation.......................12-17
Mini Glossary for Audio Stream & Surround
Mode.................................12
SoundMode...........................12
On-ScreenDisplay.....................13
InitialSettings........................14-17
GeneralOperation....................14
Language..........................14
Display..........................14-15
Audio..............................15
Lock(ParentalControl)................16
Others.............................17
Operation
DVDorVideoCDOperation...............17-20
PlayingaDVDandVideoCD...............17
.
.
.
.
.
.
.
.
.
.
.
.
.
AdditionalInformation.....................26
LastConditionMemory...................26
ScreenSaver...........................26
SystemSelect..........................26
ControllingtheTV.......................26
OperationwithRadio......................27
Presettingtheradiostations................27
Listeningtotheradio.....................27
OtherFunctions...........................28
SleepTimerSetting......................28
Dimmer...............................28
Mute.................................28
UsingtheHeadphoneJack................28
SelectingtheInputSource.................28
XTS(ExcellentTrueSound)................28
XTSpro...............................28
GeneralFeatures.....................18-20
MovingtoanotherTITLE/GROUP.
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
.
.
.18
.
18
SlowMotion.........................18
Still Picture and
Frame-by-Frame Playback
.
18
Search.............................18
Repeat............................18
RepeatA-B.........................19
Reference
LanguageCodeList.......................29
CountryCodeList.........................29
Troubleshooting........................30-31
Specifications............................32
TimeSearch........................19
MarkerSearch.......................19
Zoom..............................19
SpecialDVDFeatures....................20
TitleMenu..........................20
DiscMenu..........................20
ChangingtheAudioLanguage.
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.20
.20
Subtitles...........................20
DVDAudioDiscs........................20
3
Introducin
Before Use
Playable
Discs
ote
on
DTS-encoded CDs
playing DTS-encoded CDs, excessive audio level
may be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adjust the
volume gradually, and keep the volume level low. To
enjoy DTS Digital Surround playback, an external 5.1
channel DTS Digital Surround decoder system must
be connected to the digital output of the unit.
When
DVD
(8cm/12cmdisc)
DVD audio discs
(8cm/12cmdisc)
TM
Video CD
TM
(VCD)
(8cm/12cmdisc)
Audio CD
Disc-related terms
(8cm/12cmdisc)
In
addition, this unit
SVCD and CD-R
or
MP3, WMA, JPEG
DVD-RW, DVD+RW,
CD-RW that contains audio titles,
can
or
play
a
DivX files.
Title
(DVD only)
The main film content
accompanying
or
feature content
additional feature content, or music album.
Each title is assigned a title reference number
or
you to locate it
enabling
easily.
otes
Depending
the conditions of the
recording equip(or DVD-RW, DVD+RW) disc
itself, some CD-R/RW (or DVD-RW, DVD+RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
ment or the CD-R/RW
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Group (DVD
audio discs
The main audio content
or
only)
accompanying
feature
con-
tent or additional feature content, or music album. Each
otes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
or
other functions may be added.
sure to also refer to the instructions
Make
supplied
with
the DVDs and Video CDs. Some DVDs made for business
purposes may not be able to be
played
on
the
group is assigned a group reference number
you to locate it easily.
Scene
On
enabling
(VCD)
Video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
unit.
of Video CDs
Types
Regional
code of the DVD/CD receiver and DVDs
This DVD/CD Receiver is
designed
and manufactured for
playback of region "4" encoded DVD software.
region code on the labels of some DVDs
4
indicates which type of player can play those
discs. This unit can only play DVDs labeled "4" or "ALL".
If you try to play any other discs, the message "Check
Regional Code" will appear on the TV screen. Some
DVDs that have no region code label may still be subject
to area restrictions and therefore not playable.
The
4
There
are
two
types of Video CDs:
Video CDs
PBC
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
functions, or other
still pictures
Moreover,
typical computer-like operations.
of
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
discs
playing,
store the disc in its case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
may be disturbed during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
To
keep
Do not
volatile
liquids,
contact with the unit for a
leave marks
Cleaning
such
as
a
use a
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
a
clean
quality.
cloth. Wipe
Before
distort the
can
picture
clean the disc
playing,
the disc from the centre out-
wards.
on
insecticide spray,
or
long period
plastic products in
of time. They will
the surface.
the unit
To clean the cabinet
Use
Cleaning
the exterior surfaces clean
use
the unit. Do not leave rubber
near
as there may be a considerable temperature
increase inside the car.
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzene,
or
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents such as alcohol,
thinner, as these might damage the surface
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for
vinyl
records.
use
About
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD Receiver is
a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
If the
may appear on the TV screen during operation.
This icon means the function explained in this owner's
manual is not available
About the disc
on
Discs
DVD-V
DVD-A
Disc
Handling
VCD2.0
Hold the disc
on
will not
VCD1.1
the surface.
Do not stick paper
that
symbols
specific
DVD-Video disc.
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD and finalized DVD±R/RW.
DVD Audio discs.
Video CDs with the PBC
(playback control)
function.
Do not touch the
get
playback side of the disc.
by the edges so that fingerprints
on
A section whose title has
applicable only
Notes
symbol display
""
Video CDs without the PBC
(playback control)
function.
or
tape
on
the disc.
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
DivX
DivX disc.
5
Introducin
Front Panel and Rear Panel
PHONES connector
STANDBY/ON
STANDBY indicator
DISC
Lights red when the receiver
is in Standby mode (off).
Tray
FUNCTION/PLAY
Press and hold down this button about 3
seconds, then press repeatedly
to select
other function.
VOLUME controller
DISPLAY Window
OPEN/CLOSE button
Remote
sensor
MONO/STEREO/
PAUSE/STEP
TUNING(-/+)/SKIP(-/+)
buttons
STOP
Power Cord
SPEAKER connectors
FM Antenna connector
AV2 AUDIO
Connectors
AM
Loop
Antenna connectors
S-VIDEO OUT connector
MONITOR OUT connector
COMPONENT VIDEO OUT terminals
Connect to
AV1 AUDIO
Do not touch the inner
Electrostatic
panel.
damage
6
to the unit.
a
TV with Y Pb Pr
Input (L/R)/VIDEO
pins of the jacks on the rear
discharge may cause permanent
inputs.
IN Connectors
Input (L/R)/VIDEO
IN
Remote Control Overview
POWER
DVD
Select the output
source
(CD/DVD)
Selects input
DVD
tuner
To control the TV.
SLEEP
(FM and AM
bands)
directly
a
or
SUBTITLE
sound.
SOUND
MRAKER
-
SEARCH
Removes the setup
enjoy great sound effect.
an
audio
an
PRESET/
Marks
CH
language (DVD) or
(CD).
audio channel
Displays
+
setup
menu
Search backward
or
Selects the TV's
Acknowledges the
forward.
)
Search backward*/go to beginning of
current chapter or track or go to
previous chapter or track.
FORWARD SKIP( > )
Search forward*/go to next
chapter or track.
Select programme of TV
or removes
Program
a
radio station's
TITLE
Displays the disc's Title
VOLUME
To
menu.
frequency into
adjust speaker volume and TV volume.
Pause
playback
STOP
( x)
( X)
Stops playback.
ZOOM
CLEAR
track number
on
the
Enlarges the
program menu or a mark
MARKER SEARCH
on
the
DIMMER
a
menu, if available.
(+/-)
PLAY (B)
Starts playback.
PAUSE/STEP
the tuner.
Removes
Radio.
To tune in the desired radio station.
SKIP
MEMO.
Enter
or
TUN(-/+) (b/B):
PROG.
Accesses
selection.
menu
PRESET/CH(+/-) (v/V):
playback.
REVERSE SKIP( .
source.
ENTER
SCAN
SLOW-/+(t/T)
Reverse/ Forward slow
display.
b/B/v/V (left/right/up/down)
Selects an option in the menu.
-
.
SCAN-/+(bb/BB)
menu.
INPUT
DVD disc.
menu on a
MARKER SEARCH
Accesses On-Screen
MENU
Accesses the
point during playback.
DISPLAY
..
SETUP
or removes
a
SEARCH
SOUND MODE
Selects the sound mode.
Accesses
menu.
MARKER
AUDIO
Selects
speakers.
RETURN
AUDIO
XTS
To
System to turn off automatically.
specified time.
SUBTITLE
Selects a subtitle language (DVD).
natural and realistic
more
at a
Mute the
XTS pro
enjoy
only)
MUTE
service, programme number
select numbered options in a
menu.
To
TV
(LG
SLEEP
Set the
MUTE
0-9 numerical buttons
Select
source.
TV
BAND
System's
and closes the disc tray.
AUX
or
accesses
Select the
(Z)
OPEN/CLOSE
Opens
menu.
DVD video
image.
Press to change brightness of the
display window on the front panel
during in power-on status.
REPEAT
Repeat chapter, track, title, all.
REPEAT A-B
Repeats sequence.
Remote Control
Remote control
Operation Range
Point the remote control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote sensor
Angle: About
30° in each direction in front of the remote
sensor
Remove the
remote
battery
battery
cover on
control, and insert
AAA) batteries
correctly.
with
installation
the
rear
two R03
and
of the
(size
aligned
Caution
Do not mix old and
new
batteries. Never mix different types of batteries
(standard, alkaline, etc.).
7
Introducin
Connections
TV Connections
Make
the
of the
one
capabilities
following connections, depending
existing equipment.
on
of your
Progressive Scan (ColorStream pro)
connection
If your television is
ips
Depending
on
your TV and other
equipment
you wish
to connect, there are various ways you could connect
the DVD/CD Receiver. Use
one
high-definition
a
or
"digital ready"
television, you may take advantage of the DVD/CD
Receiver's progressive scan output for the highest
video resolution
of the connection
possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD Receiver.
methods described below.
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
Connect the COMPONENT VIDEO OUT
Caution
Make
jacks from the
corresponding in jacks on the
Pb Pr cable (C).
DVD/CD Receiver to the
sure
the DVD/CD Receiver is connected
TV
directly
using
an
optional
Y
to the TV. Select the correct AV
input on your TV.
Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
Rear of TV
protection system.
VIDEO
INPUT
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
S-Video connection
Y
Pb
Pr
L
Connect the S-VIDEO OUT
jack on the DVD/CD
Receiver to the S-VIDEO IN jack on the TV using
S-Video cable (S).
the
Video connection
Connect the MONITOR OUT
from the DVD/CD
Receiver to the VIDEO IN
the TV
video cable
jack
jack on
using
V
S
the
C
supplied (V).
Component
(Color Stream )
Video
connection
Connect the COMPONENT VIDEO OUT
DVD/CD Receiver to
TV
using
an
Y Pb Pr
jacks from the
the corresponding in jacks on the
cable (C).
L
AUDIO
R
AV2 IN
AV1 IN
Rear of DVD/CD Receiver
otes
Set the
Progressive to "On" on the Setup
progressive signal, see page 15.
menu
for
Set the progressive to "Off" by removing any disc
from the unit and close the disc tray. see that "no
disc" is displayed on the display window. Then, press
STOP and hold it for five seconds before
Progressive
scan
video connections
does not work with the
analog
(yellow VIDEO OUT jack) or
S-VIDEO connection.
8
releasing
it.
Connections
(Continued)
Optional Equipment
Connect
1
Connect
2
Connections
a
VCR to the AV IN connectors.
a
additional VCR to the AV2 connectors.
Prepa tion
VCR
OUT
IN
Additional VCR
IN
OUT
To AUDIO OUT
VIDEO
(L/R)/
VIDEO OUT
AUDIO
(L)
AUDIO
(R)
To AUDIO OUT
(L/R)/
VIDEO OUT
To AUDIO IN
VIDEO IN
(L/R)/
(AV1)
To AUDIO IN
(L/R)/
VIDEO IN (AV2)
L
AUDIO
R
AV2 IN
88
AV1 IN
888
ote
If the audio format of the
produce
a
digital output
strong, distorted sound
does not match the
or no
capabilities
of your DVD/CD Receiver, the receiver will
sound at all.
Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
Loop aerial to the AM aerial connector.
Connect the AM
Connect the FM Wire aerial to the FM aerial connector.
AM
FM Wire aerial
Loop
aerial
(supplied)
(supplied)
L
AUDIO
R
88
AV2 IN
888
AV1 IN
otes
To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire aerial.
After
connecting the
FM Wire
aerial, keep it
as
horizontal
as
possible.
9
Speaker System
Connection
Connect the
the
speakers using
To obtain the best
possible
supplied speaker
surround sound,
cords.
adjust
the
speaker parameters (volume, distance, etc.).
Connections
(Continued)
Speaker Positioning
In the
case
of normal
position
use
the 6
speakers (2
front
speakers,
centre
speaker,
2 rear
speakers
and sub-
woofer).
If you want to
subwoofer.
play
the excellent bass sound, DTS
Front speakers
According to your listening position
speakers to 45 degree.
Centre
set up the
speaker
speakers and front speakers
The centre
are
digital
surround
or
Dolby Digital surround,
speakers for equal distance. And by hearing position
ideally the
same
height.
But
normally place
it above
or
you should connect
a
set up the interval between
below the television.
Rear
speakers
right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
Place left and
the sound.
In the
rear
of
case
a
smaller
speakers above
60
room
size, if the audience is
90
than the listener 's
-
cm
near
to the rear wall set the rear
speakers opposite each other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Centre
Subwoofer
Speaker
Front
Speaker
(Right)
Front
Speaker
(Left)
Rear
Speaker
(Right)
Rear
Speaker
(Left)
Speaker Positioning Example
About Ferrite Core
Be
sure
cables
(Optional)
to attach the ferrite core to the
(for connecting
This ferrite
to this
reduce noises.
core can
How to attach the ferrite
1
speaker
unit).
Press the stopper
core
[a] of the ferrite
to
core
open.
2
Wind the cable
once on
the ferrite
core.
The
88
3
Close the ferrite
core
888
length here is
short
as
much
as
possible.
unitl it clicks.
Note:
Attach the ferrite
and
core near
the unit
(Refer
to the
fig.3
comment.).
11
Prepa tion
Before
Mini
Operation
for Audio Stream &
Glossary
Surround mode
Sound Mode
You
DVD
VCD2.0
VCD1.1
CD
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Allows you to
enjoy 5.1(or 6)
discrete channels of
high
audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of
quality digital
means identical to the original
exceptional clarity throughout a
transparent audio(which
masters)
and results in
degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under
license from DTS Technology, LLC.
true 360
When DVD is inserted
You
can change the Digital Audio Output mode by
pressing the AUDIO button on the remote control during
playback. Although the DVD contents differ from disc to
disc, the following explains the basic operation when
this feature is used.
After you select 2 channel
a)
3 ENG
D
2CH
button
) by pressing AUDIO button,
repeatedly.
Bypass
Dolby Digital surround format lets you enjoy up to
digital surround sound from a Dolby
Digital program source. If you play DVDs with
mark, you can enjoy even better sound quality, greater
spatial accuracy, and improved dynamic range.
(For example
2 ENG
D
2CH
press SOUND
Music
Movie
or
Matrix
The
5.1 channels of
"
"
After you select 5.1 channel
b)
(For example
1 ENG
D
5.1 CH
or
4 ENG
) by pressing AUDIO button,
DTS
5.1 CH
"
-"
-
press SOUND button.
indicator will be
displayed on the TV screen.
"BYPASS" indicator will be only displayed on the display
window.
(II)
Dolby
Pro
Logic
II creates five full-bandwidth
channels from two-channel
an
advanced, high-purity
sources.
output
This is done
using
matrix surround decoder that
extracts the
without
spatial properties of the original recording
adding any new sounds or tonal colorations.
MOVIE mode:
The Movie mode is for
use
the
quality
of discrete 5.1-channel sound.
MUSIC mode:
The Music mode is for
use
with any stereo music
→
HALL
STUDIO
CLUB
PL ll MOVIE
CHURCH
PL ll MTRX
BYPASS...
→
→
→
→
→
→
→
→
ote
After you select the "Bypass" of sound mode by
pressing SOUND button, press AUDIO button.
The Left, Right and Stereo of audio channel will be
displayed on the TV screen.
Each time you press SOUND button, the sound mode
of Audio CD is changed on the display window in the
following order.
MATRIX mode:
The Matrix mode is the
same as
the Music mode
except that the directional enhancement logic is
turned off. It may be used to enhance mono signals
by making them seem "larger." The Matrix mode may
use
BYPASS
THEATER 1
PL ll MUSIC
When CD is inserted
recordings.
also find
Each time you press SOUND button, the sound mode
of Video CD is changed on the display window in the
following order.
with stereo television
shows and all programs encoded in Dolby Surround.
The result is enhanced soundfield directionality that
approaches
When Video CD is inserted
in auto
systems, where the fluctuations
from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The
ultimate "cure" for poor FM stereo
simply to force the audio to mono.
reception
may be
BYPASS
You
BYPASS
-
played according
to the way it was recorded.
is
→
→
→
→
→
→
→
→
identify the encoding format of program
by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
can
software
-
signals
HALL
STUDIO
CLUB
PL ll MOVIE
CHURCH
PL ll MTRX
BYPASS...
For your reference
-
Software with multichannel surround audio
→
THEATER 1
PL ll MUSIC
ote
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
12
Before
Operation (Continued)
On-Screen
You
use
the
Some items
screen.
To
general playback status on the TV
can be changed using the menu.
on-screen display:
display
can
Display
the
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
Title Number
1/3
b /
B, Numbers
ENTER
Press DISPLAY
during playback.
1
Press
select
item.
2 The selected item is highlighted.
v / V to
Chapter
Number
1/12
b /
3
change
the
the number buttons if
use
inputting
Time search
the title
setting. You can
appropriate (e.g.
number).
For
press ENTER to execute the
some
also
0:20:09
Numbers, ENTER
A-B
Repeat
title
Repeat
sequence
Resume
Action
play
language
Digital Audio
Output mode
b/Bor
and
AUDIO
functions,
Subtitle language
setting.
A BC
prohibited
or
point
If
no
button is
screen
all of the features
pressed for 10 seconds,
display disappears.
b/B
Bypass
Selection Method
Items
provide
b/B
Example: On-Screen Display during
playing VCD
not available
otes
Some discs may not
shown below.
b/Bor
SUBTITLE
1/3
Sound
from this
1 ENG
Angle
PLAYBACK STATUS/RESTRICTIONS
Title
Prepa tion
ENTER
an
Audio
Press b / B to
B, Numbers
the
on-
Track Number
(or PBC mode)
1/3
b /
B, Numbers
ENTER
Time search
Numbers
ENTER
0:20:09
b/Bor
Audio Channel
AUDIO
Sound
Bypass
b/B
Example: On-Screen Display during
playing DVD Audio
Selection Method
Items
Group
b /
Number
ENTER
b /
Track Number
B, Numbers
ENTER
Time search
0:20:09
Audio
language
Digital Audio
Output mode
Display only
b/Bor
AUDIO
and
Subtitle language
B, Numbers
OFF
ABC
Display only
b/B
Page (or Angle)
or
1/3
13
Before
Initial
Operation (Continued)
LANGUAGE
Settings
the Setup menu, you can make various adjustments to items such as picture and sound. You can also
By using
LANGUAGE
language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
set a
item,
To
see
Press SET UP to
display
on
the
menu.
on
General
2
4
5
Original
A second press of
Move
previous
Select
Operation
Disc Audio / Subtitle / Menu
The setup
option
then
press B to move to the second level.
The screen will be shown the current setting for the
as
well
as
alternate
setting(s).
Use v / V to select the second desired
then press B to
move
option
to the third level.
/ V to select the desired
setting
Setup
menu
and
or
PLAY to exit the
Original:
disc
was
Refers to the
on-screen
DVD-V
display.
DVD-A
audio track
original language
(disc
in which the
recorded.
Other: To select another language, press number
buttons to enter the
according
to the
enter the wrong
remote control.
corresponding 4-digit number
language code list on page 29. If you
language code, press CLEAR on the
then press
ENTER to confirm your selection.
Some items require additional steps.
Press SET UP
for the
language
language you prefer for the
audio), subtitles, and the disc menu.
appears.
Use v / V to select the desired
v
a
Select the
menu
Select
OSD
level:
Press SET UP.
Use
Off
Disc Menu
the remote control.
selected item,
3
Disc Subtitle
screen.
the remote control.
To go back to the
1
Original
and exit the Menu:
SET UP will take you back to initial
To go to the next level:
Press b
English
Disc Audio
pages 14 to 17.
display
Press B
OSD
DISPLAY
setup
DISPLAY
menu.
TV
16:9
Aspect
Display
Mode
Progressive
Widescreen
Off
Scan
Move
TV
Aspect
DVD-V
Select
DVD-A
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display
Display
Mode
Mode
DVD-V
setting
DVD-A
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox:
Displays a wide picture with
portions of the screen.
bands
on
the
upper and lower
Panscan:
the entire
14
Automatically displays
the wide
picture
and cuts off the
portions
that do not fit.
screen
on
Before
Operation (Continued)
Progressive Scan
AUDIO
Progressive Scan Video provides
pictures with less flickering.
the
highest quality
Each DVD disc has
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the receiver to a standard (analog)
television,
set
Progressive Scan
Select
1
menu
scan
set
signal,
"Progressive
then press B
of audio output
on
5.1
a
to On.
Prepa tion
Select
Speaker Setup
DRC
On
Vocal
On
the DISPLAY
.
Move
Select
Off
Aspect
Display
to
use.
DISPLAY
TV
options.
options according
AUDIO
Progressive Scan
Scan"
variety
the type of audio system you
to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
progressive
a
Set the DVD/CD Receiver's AUDIO
On
Mode
Progressive
5.1
Scan
Speaker Setup
DVD-V
DVD-A
Select
speaker settings, including volume balance and
or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setting" page 25)
distance,
Move
v / V
Select
Dynamic Range Control (DRC)
2
3
Select "On"
Press ENTER to confirm your selection.
menu will appear.
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
4
When the confirm
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
using
the
buttons.
DVD-V
The confirm
Cancel is
menu
appears on your screen
default. Use the b / B
highlighted as
highlight Enter.
buttons to
5 Pressing
Progressive
to
scan
DivX
thanks to
digital
audio
technology. However,
quietest ones). Then, you may listen to a movie
losing dialog intelligibility.
at a lower volume without
Set DRC to On for this effect.
mode.
otes
ote
Progressive Scan
menu
possible,
and the
ENTER will set the DVD/CD Receiver
DVD-A
will not be
displayed
in the
setup
when the VIDEO OUT SELECTOR switch is
set at SCART
position.
The DRC function works
The level of
depending
Caution
Vocal
only during playback
of
recorded discs.
Dolby Digital
Dynamic Range Compression
on
may differ
the DVD disc.
DVD-V
Once the
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1)
Set Vocal to On
only
DVD is
The karaoke channels
mix into
playing.
a
when
a
multi-channel Karaoke
on
the disc will
normal stereo sound.
Remove any disc from the unit and close the disc
on the display
tray. See that "NO DISC" is displayed
window
2)
Press and hold STOP ( x ) for five seconds then
release it. The video output will be restored to the
standard setting, and a picture will once again be
visible
on a
conventional
analog
TV
or
monitor.
15
Before
LOCK
Operation (Continued)
Password
(Parental Control)
You
LOCK
1
Unlock
Rating
****
Password
2
Code
Country
can
4
Move
that may not be suitable
of these discs contain parental
scenes
Many
applies
certain
scenes on
to the
complete
the disc. Movies and
Press SET UP to exit the
disc
or
rated
scenes are
1
2
Enter
your children from being able to view material you
believe is unsuitable.
setup
on
the LOCK
menu
then, press
Code
6-digit number
security code is
a new
code
can
"210499"
on
clear it
using
the setup
menu
cleared.
described above.
as
ote
When
"Rating"
the
and the
parental control feature allows you to block access
to scenes below the rating you input, thereby preventing
B
menu.
forget your Security
Input
to
The
Select
then press ENTER.
If you forget your security code you
the following steps:
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
1
2
it
Select
DVD-V
control information that
highlighted.
new 4-digit code,
again to verify.
Enter the
If you
for children to view.
change password.
Select Password on the LOCK menu then press B.
Follow step 2 as shown left (Rating). "Change" or
Input
Some movies contain
enter or
"New" is
3
Rating
(Security Code)
"
"
appears on the TV screen,
and then press SET UP to move to the
INPUT PASSWD
press STOP
(x)
menu.
Country
DVD-V
Code
.
Enter the code of the
To
the
access
Password and
Rating,
Country
4-digit
Code
features, you must input the
security code you created.
If you have not yet entered a security code you
prompted to do so.
are
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3 Selectaratingfrom1to8usingthev/V
buttons.
Rating 1-8: Rating
rating eight (8)
and
(1)
one
has the most restrictions
is the least restrictive.
country/area
whose standards
used to rate the DVD-Video disc, based
in the reference chapter.
were
Code"
1
Select
2
Follow
3
4
Select the first character
"Country
on
on
the list
the LOCK menu, then
press B.
step
Shift the
2
as
cursor
shown left
(Rating).
using
v / V
buttons.
using B button and select
using v / V buttons.
the
second character
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
ote
If you set a rating for the DVD/CD Receiver, all disc
scenes with the same rating or lower are played. Higher
rated
scenes are
is available
same
rating
on
not
played
or a
lower
one.
found, playback stops. You
word
or
unless
change
alternate
the
rating
If
no
scene
suitable alternative is
must enter the
level in order to
Press ENTER to confirm your
4 then press
16
an
the disc. The alternative must have the
SET UP to exit the
4-digit passplay the disc.
rating selection,
menu.
Press ENTER to confirm your
5 selection.
country code
Before
DVD
Operation (Continued)
OTHERS
or
Playing
Video CD
a
Operation
DVD and Video CD
OTHERS
Playback Setup
PBC
On
DivX(R) Registration
Select
Turn
on
DVD
VCD2.0
the TV and select the video
VCD1.1
input
source con-
nected to the DVD/CD Receiver.
Audio system: Turn on the audio system
and select the input source connected to the
Operation
DVD/CD Receiver.
Select
Move
PBC
Set
Press OPEN/CLOSE
1
VCD
Playback Control (PBC)
On:Video CDs with PBC
to On or Off.
to the
2 facing
played
are
the
same
way
as
Audio CDs.
Press OPEN/CLOSE
3 READING
DivX(R) Registration
You
can
DivX
show the DivX DRM
Your
Please
the
registration
use
:
using
the
To learn
only.
more
automatically.
(Z)
to close the
sure
tray.
the TV screen, and playback
If playback does not start,
on
might
menu
appear
instead.
If
with
Video On Demand service.
DivX(R)
tray, with the label
XXXXXXXX
register this player
This will allow you to rent and
appears
press PLAY.
In some cases, the disc
(Digital Right
code is
this code to
DivX(R)
starts
code for your unit
Management) Registration
tray.
up.
When a double-sided DVD is inserted, make
the side you want to play is facing down.
PBC.
Off:Video CDs with PBC
to open the disc
Load your chosen disc in the
played according
are
(Z)
The
purchase videos
DVD
Video On Demand format.
a menu screen
is
displayed
may be displayed first after
Video CD which contains a menu.
menu screen
or
loading
a
go to www.divx.com/vod
DVD-V
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental
The
an
encrypt movie file.
Use the b/B/v/V buttons to select the title/chapter you
view, then press ENTER to start. Press TITLE
want to
or
DVD MENU to return to the
menu screen.
DVD-A
otes
If you rent the DivX VOD file, it has several
viewing limits as show below.
options
of
Use the b/B/v/V buttons to select
an
option
you
want, then press ENTER to view the option.
VCD2.0
Display
the number which you
can
watch the file.
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
?
This rental video has 7 views left. A view
ends when you
video,
or
stop playback, play
turn off your
Do you want to
different
use one
of your 7 views
expired.
the authorization
This video
player
expired.
error.
is not authorized to
play this video.
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
menu screen.
You also may set PBC to Off under setup.
otes
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental
Display
menu screen.
and the exact
now
No
This rental is
setting
using
player.
Yes
The rental has been
a
Menu
Control",
(see
page 16).
region code.
on
DVDs may have a
Your receiver will not
play
discs that have
code different from your receiver. The
this player is 4 (four).
region
region code
a
for
17
DVD
Video CD
or
Operation (Continued)
Still Picture and
General Features
DVD-V
ote
Unless stated otherwise, all operations described
the remote control. Some features may also be
available
on
Moving
DVD-V
the
Setup
use
1
Press PAUSE/STEP
move
menu.
now
go into PAUSE
You
advance the
can
pressthe remote control.
on
to another TITLE/GROUP
DVD-A
a
disc has
than
more
to another
Moving
DVD-V
title/group
title/group,
one
as
you
can
follows:
a
title
VCD2.0
on a
more
as
Press .
or
one
more
than
track, you
one
chapter
can move
press DISP. Then, press 3/4 to select the
3
For
two-digit numbers, press
(0-9) in rapid succession.
Slow Motion
DVD-V
Press SLOW -/+
VCD2.0
during
VCD1.1
1
To
or
t 1/2
or
T 1/2
required speed: t
(backward), or T
(forward).
To exit slow motion mode, press PLAY.
The
To
The
3
in
mode, press
DVD-A
-
VCD2.0
mX8, mX16,
PLAY.
VCD1.1
DivX
Repeat Chapter/Title/Off
Repeat Chapter icon appears
on
the TV
screen.
repeat the title currently playing, press
second time.
a
Repeat Title icon appears
To exit
Repeat mode,
on
the TV
screen.
press REPEAT
a
third
time.
The
1
To
Repeat Off icon appears
on
the TV
screen.
reverse
is not
applicable
for
3
Video CD.
-
Repeat
Track/All/Off
repeat the track currently playing, press
REPEAT.
The
2
ote
playback
to select the
repeat the currently playing chapter, press
REPEAT
To
Repeat Track icon appears
on
the TV
screen.
repeat the disc currently playing, press
REPEAT
The
Slow motion
go into SEARCH mode.
REPEAT.
Video CDs
Use the SLOW -/+ to select the
1/8, t 1/4
T
1/16,
1/8, T 1/4
now
pause.
The receiver will enter SLOW mode.
t
DVD-V
DVD-Video discs
the numbered buttons
DVD-A
during playback.
or M
To exit SEARCH
Repeat
2
ote
VCD1.1
(backward) or MX2, MX4, MX8,
MX16, MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8, mX16 (backward) or
MX2, MX4, MX8, MX16 (forward).
follows:
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
or M
VCD2.0
mX100
or a
briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
Press m
DVD-A
The DVD/CD Receiver will
Press m
to another
>
DVD-V
repeatedly
2 required speed: mX2,
mX4,
DivX
disc has
than
chapter/track
2 1/16,
1
to another CHAPTER/TRACK
DVD-A
disc has
3
during playback.
picture frame-by-frame by
2 ing PAUSE/STEP repeatedly
DISP., then press the appropriate numbered
button (0-9) to select a title number.
1
DivX
mode.
Press
When
VCD1.1
The DVD/CD Receiver will
Search
When
Frame-by-frame playback
VCD2.0
DVD-A
To exit
second time.
a
Repeat
All icon appears
Repeat mode,
on
the TV
screen.
press REPEAT
a
third
time.
The
Repeat Off icon appears
on
the TV
screen.
ote
On
a
Video CD with
the setup
17.
18
menu
PBC, you must set PBC to Off on
Repeat function. See page
to use the
DVD
or
Video CD
General Features
Repeat
To repeat
A-B
a
DVD-V
Operation (Continued)
(continued)
DVD-A
a
You
from
can
briefly
on
again
A-B appears
briefly
sequence begins.
the TV
start
points
To enter
title:
Press A-B at your chosen
Press A-B
VCD1.1
DVD-V
nine
sequence in
A- appears
VCD2.0
Marker Search
starting point.
1
screen.
a
playback
Press DISP.
on a
on
the
The
playing
at
on-screen
dis-
The Time Search box shows the
seconds, press
Search icon in the
3/4
on-screen
to select the Time
display.
seconds, use the number buttons to
enter the required start time. Enter hours,
minutes, and seconds from left to right in the
Within 10
box.
If you enter the wrong numbers, press CLEAR to
the numbers you entered. Then enter the correct
remove
num-
bers.
Marked Scene
a
1 During
2
3 Playback
4
playback,
The MARKER SEARCH
press SEARCH.
menu
will appear
on
the
1/2 to select
seconds, press
a
screen.
marker
number that you want to recall.
To
will start from the Marked
remove
scene.
the MARKER SEARCH menu, press
To clear
a
Marked Scene
disc
1 During playback,
2
3
4 Repeat steps
5
The MARKER SEARCH
press SEARCH.
menu
will appear
on
the
screen.
Press 1 / 2 to select the marker number that you
want to
erase.
Press CLEAR.
Within 10
seconds, press
ENTER to confirm the
start time.
starts from the selected time on the disc. If you
time, playback will continue from the current
enter an invalid
point.
points
SEARCH.
The "-:--:--" appears in the Time Search box.
Playback
briefly.
Press ENTER.
elapsed playing time of
the current disc.
Within 10
screen
disc.
Within 10
screen.
the TV
on
1 to enter up to nine Marker
2 Repeat step
disc
during playback.
appears
to
During disc playback, press MARKER when
playback reaches the spot that you want to
To Recall
play
point. Up
mark, follow these steps.
The marker icon will appear
DVD-V
The Time Search function allows you to start
any chosen time on the disc.
memorized
a
be memorized.
can
memorize.
at your chosen end point.
the TV screen, and the repeat
on
To cancel the sequence, press A-B.
Time Search
VCD2.0
The marker number will be erased from the list.
2 and 3 to
erase
additional marker
numbers.
To
remove
the MARKER SEARCH menu, press
SEARCH.
Zoom
DVD-V
DVD-A
VCD2.0
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1
Press ZOOM
during playback
or
still
playback
activate the Zoom function.
If you press ZOOM
repeatedly, the magnification level
increases up to four steps.
100% size
→
1600% size
2
400% size
→
→
800%
100% size
Use the 1234 buttons to
zoomed
→
move
through
the
picture.
ote
The
zoom
function may not work for
some
DVDs.
19
to
Operation
DVD
Video CD
or
Operation (Continued)
DVD Features
Special
DVD-V
DVD-A
A
typical DVD Audio disc contains up to seven times the
capacity of a CD. This additional space is used for
data
the contents of DVD Video
discs: Menus
Checking
DVDs may contain menus that allow you to access
features. To use the disc menu, press MENU.
Then, press the appropriate number button to select an
option. Alternatively, use the 1/2/3/4 buttons to highlight your selection, then press ENTER.
special
music, either Advanced Resolution multi-channel sound
quality that is closer to the artist's master recording or
for longer recordings. Many DVD Audio discs contain
on-screen text, such as artist biographies, playlists, or
lyrics. Some DVD Audio discs contain photo galleries or
video clips.
ote
To
DVD-V
Title Menu
DVD-A
If the current title has
the
2
menu can
list
menu
may appear.
angles, spoken lanoptions, and chapters for the
camera
guage and subtitle
title.
receiver). If you use the DIGITAL OUT (OPTICAL or
COAXIAL) for your audio connection, the sound will
only be similar to CD-quality sound even though you're
playing a DVD Audio disc.
Moving
Disc Menu
DVD-V
menu
is
Changing
groups. Your player enables you to quickly access
different groups during playback via the on-screen
DVD-V
DVD-A
displayed.
the Audio
display.
Language
DivX
Press AUDIO repeatedly during playback to hear
different audio language or audio track.
Changing
the Audio Channel
a
1.
Press DISP.
2.
Press 3/4 to select
Press 1/2
3.
Group
in
on
stop mode.
icon.
the numbered buttons
(0-9)
to select a
Note:
VCD2.0
VCD1.1
ote
Sometimes the author of the disc creates hidden
content that can
only be accessed by entering a password. If the lock icon appears on the TV screen, enter
the password (sometimes you'll find it on the disc's
jacket
appears, the feature is not available
or
during playback
group number.
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT or RIGHT).
If
to another GROUP
Some DVD Audio discs divide content into different
DVD-A
Press MENU.
The disc
and surround effect of
Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD/CD
menu, the menu will appear on
Otherwise, the disc
screen.
The
a
quality
DVD
Press TITLE.
1
maximum sound
enjoy
on
the disc.
cover or on a
isn't dictated
by
web
site).
This
password
your DVD/CD receiver
---
it is
control
a
function
of the disc.
Subtitles
DVD-V
DivX
Press S-TITLE repeatedly during
different subtitle languages.
Since the
playback
to see the
otes
The subtitle file of the DivX file is displayed only smi,
srt and sub.
If there is no information or there is a code that can
not read in the DivX file, "1/1" etc are displayed.
DVD Audio Discs
DVD Audio is
building on the success
of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A
DVD Audio disc can be identified by the DVD audio logo
on the disc jacket or on the disc itself.
a new
disc format
DVD Audio can provide higher quality stereo than Audio
CDs with a sampling rate of up to 192kHz (compared to
44.1kHz for CDs). DVD Audio digital sound can be
delivered with up to 24 bits of data (compared to 16 bits
for a standard CD).
20
the
authoring of DVD Audio Discs varies, some of
display choices might not be available for
you're playing.
on-screen
the disc
another PAGE
Viewing
Since DVD Audio discs
are
various ways to
1.
Press DISP.
3 /4
can
see
hold
a
lot of content, there
on the disc.
what's available
during playback.
2.
Press
to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends upon
the way the disc
was
created.
Note:
Since the
the
authoring of DVD Audio Discs varies, some of
display choices might not be available for
you're playing.
on-screen
the disc
Audio CD
Playing
Disc
an
CD
MP3/WMA Disc
or
Operation
Audio CD and MP3/WMA
MP3
Repeat Track/All/Off
You
WMA
can
play
a
title/chapter/all/track
1 Press REPEAT when
The DVD/CD Receiver
recordings
on
play MP3/WMA formatted
CD-ROM, CD-R, or CD-RW discs.
can
List
Track1
Track8
Track2
Track3
Track3
Track12
Track4
Track7
Track5
Track6
Track6
Track9
Track7
Track1
Track8
Track10
does not
Off(No display):
CD
1 Press m or
Program
on a
WMA
disc.
disc. The repeat icon
repeat mode.
TRACK: repeats the current track
ALL: repeats all the tracks on a disc.
Search
Audio CD
a
2 Press REPEAT to select a desired
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
1/12
playing
MP3
appears.
Audio CD
0:00:00
CD
MP3
Operation
play repeatedly.
WMA
Mduring playback.
The receiver will
now
2 Press m or M
go into SEARCH mode.
repeatedly
to select the
speed: mX2, mX4, mX8 (backward)
MX4, MX8 (forward).
3 To exit SEARCH
required
or
MX2,
mode, press PLAY.
MP3 / WMA
1.
Press v / V to select
see
2.
a
folder, and press ENTER
to
the folder contents.
MP3 / WMA disc
Press v / V to select a track then press PLAY
ENTER. Playback starts.
or
limited
as
compatibility
with this
player
is
follows:
Sampling frequency: within 32 48
within 24 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32- 192kbps (WMA)
kHz
The DVD/CD Receiver cannot read
an
-
(MP3),
-
0:00:00
1/104
-
MP3
List
Program
1-Music1
MP3/WMA
2-Music2
file that has
3-Music3
file extension other than
a
4-Music4
".mp3"
/
".wma".
5-Music5
6-Music6
CD-R
7-Music7
otes
If you are in a file list on the MP3/WMA menu and want
to return to the Folder list, use the v / V to highlight
and press ENTER.
Press MENU to
On
move
to the next page.
CD with MP3/WMA file and JPEG file, you can
switch MP3/WMA and JPEG menu. Press TITLE and
a
MP3/WMA
JPEG word
or
use b
lighted. Then,
Pause
CD
2 To return to
>
In
case
of audio
should not contain
an
This DVD/CD Receiver
WMA
press PLAY
the disc should be less
requires
discs and
recordings
achieve
or
are
press
CD
step back
to the
WMA
to the next
track.
previous
track.
CD,
track,
directly
using the numbered buttons (0-9)
to any
optimal playback quality. Pre-recorded DVDs
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MP3
briefly during playback to go
beginning of the current
to
on
to meet certain technical standards in order to
during playback.
to go
/ ?
*:"<>letc.
The total number of files
briefly
the track number
incorporate
than 999.
to return to the
Press . twice
.mp3 or .wma extension.
special letters such as
must
They
high-
playback,
again.
or
MP3 / WMA files. We
JPEG
to another Track
Press .
playback
is
PAUSE/STEP
Moving
to
recommend that you use Easy-CD Creator, which
creates an ISO 9660 file system.
File names should have a maximum of 8 letters and
or
on
top of the
impossible
menu
MP3
1 Press PAUSE/STEP
or
format should be ISO 9660
/ B to select MP3/WMA
then press ENTER.
track
physical
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
enter
these
require certain pre-existing conditions (see
above) to ensure compatible playback.
Customers should note that
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
during playback.
21
JPEG Disc
Viewing
Operation
JPEG disc
a
JPEG
JPEG disc
play discs with JPEG files.
Before playing JPEG recordings, read the
JPEG Recordings on right.
This unit
as
can
Insert
disc and close the
a
The JPEG
menu
appears
notes on
is limited
player
upon the size and number of JPEG
a long time for the DVD/CD
Depending
Receiver to read the disc's contents. If you don't
display after several minutes,
see an on-screen
the TV
screen.
of the files may be too large
reduce the
resolution of the JPEG files to less than 2760 x
some
JPEG
2048
List
with this
files, it could take
tray.
on
compatibility
follows:
Preview
---
pixels
and burn another disc.
JPEG Folder 1
The total number of files and folders
JPEG Folder 2
on
the disc
JPEG Folder 3
should be less than 999.
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
Some discs may be incompatible due to
recording format or the condition of disc.
JPEG Folder 7
JPEG Folder 8
2
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears.
If you are in a file list and want to return to the
previous
Folder list,
remote to
3
the v / V buttons
use
on
the
and press ENTER.
highlight
While
to the
viewing a file, you can press STOP
previous menu (JPEG menu).
to move
ips
There
four Slide
:
Speed options
(Normal), >>> (Fast) and II (off).
Use v/V/b/B to highlight the Speed. Then, use b / B
select the option you want to use then press ENTER.
If you set Speed option to Off, Slide is not active.
>
are
(Slow),
>>
JPEG
SLIDE SHOW
Use vVbBto
to
highlight
the
(Slide Show)
then
press ENTER.
STILL PICTURE
1.
JPEG
Press PAUSE/STEP
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide show, press PLAY
PAUSE/STEP again.
Press SKIP
(.
or
>)
once
TO ROTATE PICTURE
Press
b / B
picture
22
during showing
clockwise
or
while
previous
a
press
JPEG
MOVING TO ANOTHER FILE
to advance to the next or
or
viewing
a
picture
file.
JPEG
picture
to rotate the
counter-clockwise.
different
Ensure that all the selected files have the
extensions when
If the files have
rename
File
If you want to view a particular file, press v / V
to highlight a file and press ENTER or PLAY.
a
them
the files
by
are
Windows
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
names
to be read
copying
".jpg"
extension will not be able
this DVD/CD Receiver. Even
shown
Explorer.
as
JPEG
image
files in
though
Programmed Playback
CD
MP3
WMA
The program function enables you to store your favorite tracks from any disc in the receiver memory. A program
contain 300 tracks.
1
Insert
disc.
a
REPEAT PROGRAMMED TRACKS
1.
Audio CD and MP3/WMA Discs:
Audio CD
or
MP3/WMA
menu
appears
as
1/12
0:00:00
Audio CD
Program
playing
below.
Press REPEAT to select
a
1/104
MP3
List
Press REPEAT when
a
disc. The repeat
icon appears.
2.
0:00:00
can
desired repeat mode.
JPEG
TRACK: repeats the current track
ALL: repeats all the tracks on programmed list.
Program
List
Track1
Track8
Music Folder 1
Track2
Track3
Music Folder 2
Track3
Track12
Music Folder 3
Track4
Track7
Music Folder 4
Track5
Track6
Music Folder 5
Track6
Track9
Music Folder 6
Track7
Track1
Track8
Track10
Off(No display):
does not
play repeatedly.
Music Folder 7
ERASING A TRACK FROM "PROGRAM"
Music Folder 8
LIST
Audio CD Menu
MP3/WMA Menu
1.
Use vVto select the track that you wish to
Program list.
erase
from the
2
Select
or
a
track
"
on
the "List", then press PROGRAM
2.
icon then press ENTER to
the selected track on the "Program" list.
select
place
Repeat
to
(Add)"
place
additional tracks
on
the list.
You
can
add all tracks in the disc. Select
"
( Add All)" icon
then press ENTER.
3
Alternatively, select
(Delete)"
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks
ote
on
the list.
ERASING THE COMPLETE PROGRAM
LIST
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
Use v / V to select
page.
"
(Del all)",
then press ENTER.
ote
Press PLAY
4 the order
"
Press CLEAR.
or
ENTER to start.
Playback begins
programmed the tracks.
in which you
stops after all of the tracks
Playback
"Program"
list have
To
normal
resume
5 back, select
a
played
on
in
The programs
are
also cleared when the disc is removed.
the
once.
playback
from
track of AUDIO CD
programmed play(or MP3/WMA)
list and then press PLAY.
23
Operation
DivX Disc
Using
Operation
this DVD/CD Receiver you
can
play
DivX disc.
DivX disc
disc and close the tray. The DivX
appears on the TV screen.
Insert
1
a
0:00:00
menu
as
compatibility
with this
player
is limited
follows:
Available resolution size of the DivX file is under
720x576
1/12
(W
x
H) pixel.
DIVX
The file
List
name
of the DivX subtitle is available
20~40characters
Movie Folder 1
Movie Folder 2
Movie Folder 3
If there is
Movie Folder 4
impossible
code to express in the DivX
as
mark on the dis-
Movie Folder 6
Movie Folder 8
If the number of the
1
2
a
folder, and press ENTER. A
v / V buttons on the remote to
highlight
is not interleaved,
putted.
and
?
press ENTER.
If you want to view a particular file, press v / V to
a file and press ENTER or PLAY.
Press STOP to exit.
not
frame is
over
30 per
operate normally.
either video
or
audio is out-
If the file is recorded with
ports
3 highlight
screen
second, this unit may
If the video and audio structure of recorded file
list of files in the folder appears. If you are in a file
list and want to return to the Folder list, use the
4
"
_
play.
Movie Folder 7
Press v / V to select
"
file, it may be displayed
Movie Folder 5
by
(different by language).
*
some
of
1-point
GMC, the unit supof the record level.
GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
are different levels of GMC encoding, usually called
There
1-point, 2-point,
or
3-point GMC.
otes
?
Be
sure
DivX file
?
?
to select "SUBTITLE ON" mode before
playback
ENTER every time.
When the subtile has more than two languages in the
a
by pressing
original subtile is only available.
The Pro logic II Sound mode is not available for
file,
DivX file.
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 32 48 kHz
-
within 24
Bit
40
24
48kHz
(WMA)
rate: within 32 320kbps (MP3),
192kbps (WMA)
-
-
-
(MP3),
Speaker Setup
Adjust
the
for the built-in 5.1 channel
following settings
surround decoder.
Distance
If you connected speakers to your DVD/CD Receiver,
the distance lets the speakers know how far the
setting
1
2
3
Press SET UP. The
setup
menu
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
appears.
listener at the
Use v / V to select the AUDIO
B to move to
option
then press
Use v / V to select the
move
time.
adjust
the Distance of the selected
speaker.
the second level.
then press B to
is highlighted.
same
Press b / B to
Speaker Setup option
to the third level. "Select"
ote
You
Press ENTER and 5.1
4 appears.
Speaker Setup
menu
can adjust the distance
speakers (left & right) only.
of Center
speaker
and Rear
Test
AUDIO
Press b / B to test the
Adjust
Front L
Speaker
Size
0
dB
Distance
2
m
speaker.
signals
Rear
Right (R)
→
→
Front
Rear Left
(L)
Right (R)
→
→
SubWoofer
Off
Select
Move
Return
Use b / B to select the desired
6 Adjust options using
7
→
Volume
Test
5
memorized in the system.
Front Left (L)
Center
Small
of each
signals
the volume to match the volume of test
Enter
speaker.
v / V / b / B
buttons.
Press ENTER to confirm your selection. The
unit returns to the
previous
menu.
Speaker
Select
a speaker that you want to adjust.
(Front speakers (Left), Front speakers (Right), Center
Speaker, SubWoofer, Rear speakers (Left), or Rear
speakers (Right))
ote
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
speaker settings
are
fixed, you
cannot
change
them.
Volume
Press b / B to
speaker. (-5dB
adjust the output
+5dB)
level of the selected
~
25
Operation
Additional Information
Last Condition
Memory
Controlling
DVD
This DVD/CD Receiver memorizes the
user
for
settings
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
player. If you load
memorized, the latest stop
switch off the
a
tings
ly recalled.
position
the TV
Your remote control is
DVD/CD Receiver
as
of operating your
limited functions of LG TV.
capable
well
as
Follow the instructions below to operate for your LG TV.
disc that has its setis automatical-
Before
1
using
the remote control, press the TV to
select the device to be
operated.
To switch the remote control mode
different
device),
be
(to operate
a
to press the TV first.
sure
otes
Settings
are
stored in memory for
use
any time.
This DVD/CD Receiver does not memorize
settings
of
disc if you switch off the DVD/CD Receiver before
commencing to play it.
2
The
POWER, CH( E / D ),
buttons
on
VOLUME
(+/-), and INPUT
operate the
remote control are used to
LG TV.
a
Remote Control Codes for LG TV
Hold POWER and press PR/CH(+/-)
repeatedly until the TV on or off.
Screen Saver
The
Setting
appears when you leave the DVD
mode for about five minutes.
(E/D)
button
screen saver
in
player
Stop
ote
If the remote control does not
System
TV, try the other code
Select
You must select the
appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold PAUSE/STEP on the front panel or
remote control for more than 5 seconds to be able to
select
a
system (PAL, NTSC
or
AUTO).
When the selected system does not coincide with the
system of your TV, normal colour picture may not be
displayed.
AUTO:
Select when DVD/CD Receiver is connected
with Multi
NTSC:
system TV.
Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL:
Select when DVD/CD Receiver is connected
with PAL-TV.
26
originally supplied
Due to the variety
or use
operate your particular
the remote control
with the LG TV.
of codes used
by manufacturers,
OUR COMPANY cannot guarantee that the remote
control will operate every model of LG TV.
Operation
Presetting
You
can
tuning,
with Radio
the radio stations
preset 50 stations for FM and AM (MW). Before
make
sure
Preset radio stations in the DVD/CD Receiver's memory
(see "Presetting radio stations" on the left).
that you have turned down the vol-
first
the remote control until FM
1
ume.
Press BAND
1
AM
on
(MW) appears
in the
display
or
window.
2
And then every time you press
AM (MW) changes alternately.
BAND,
3
Press and hold TUNING
or
until the
appear in the
on
Press
the remote control.
( D / E ) on the remote control
the preset number you want.
-
To turn off the radio
select another function mode
to select
Use manual
(DVD/CD,
AV 1,
or
automatic
tuning
in
step
or
etc.,).
2.
tuning, press TUNING
the remote control repeatedly.
For manual
the remote control
For automatic
tuning,
or
press and hold TUNING
for about two seconds
or
on
the
remote control.
To select
You
a
by rotating VOLUME on the
by pressing VOLUME + or on the
control repeatedly.
or
3 to 6 to store other stations.
Repeat steps
To tune in
the remote control
To listen to non-preset radio stations
The station is stored.
7
on
preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
on
on
PR(D/E) repeatedly
Press POWER to turn the DVD/CD Receiver off
Press PR
Press PROG./MEMO.
FM appears in the
to select the
remote
a
program)
preset number will flash in the display window.
6 again.
or
the volume
display window.
Press PROG./MEMO.
A
stereo
display
front
when the DVD/CD Receiver tunes in
(for
(MW)
window.
3 Adjustpanel
then
release.
Scanning stops
2
on
panel for about two seconds
frequency indication starts to change,
Press BAND until AM
The last received station is tuned in.
FM and
the front
station. "TUNED" and "STEREO"
to the radio
Listening
station with
Press TUNING
a
weak
the number buttons
on
the remote control
to select a
signal
repeatedly
or
to tune in the station
preset radio station directly
a
can use
in
step 3
manually.
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
(within
3
seconds).
To clear all the stored stations
Press and hold PROG./MEMO. for about two seconds
and "CLEAR ALL" is
and then press
in the
display window
PROG./MEMO. again, the stations are
appeared
cleared.
If you have accidentally entered into the "CLEAR ALL"
and you do not wish to clear the memory, do not
press any key. After a few seconds, the "CLEAR ALL"
display
will go off
by
itself and
change
to mode.
For your reference
If an FM program is
Press MONO/ST.
noisy
panel so that
display window.
There will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
"STEREO"
on
the front
disappears
in the
effect.
To
improve reception
supplied antennas.
Reorient the
ote
If all stations have
already
been entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
a
the preset number, follow the steps 5-6
as
above.
27
Operation
Other Functions
Sleep
You
Timer
XTS
Setting
set the DVD/CD Receiver to turn off automatiat a specified time.
can
cally
Press SLEEP to set the desired
1
The SLEEP indicator and
time.
sleep
sleep time appears
in the dis-
play window.
Each time you press SLEEP the
in the following order.
2
setting changes
SLEEP 180 →150 →120→90→80→70 →60→50→
40→30→20→10 →OFF
ote
You can check the time remaining before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
(Excellent True Sound)
You
can enjoy the vivid stereophonic sound of the
digital original source without any signal distortion.
Each time you press XTS during 2 channel
the setting changes in the following order.
XTS-1→XTS-2→XTS-3→NORMAL...
Tips:
XTS- 1: When
sound
high display
source
front
Using
the
Connect
a
Headphone
stereo headphone
PHONES connector.
Jack
plug ( 3.5mm)
into the
speakers are automatically disconnected
in a headphone (not supplied).
Selecting
IN
can use
or
the
VCRs
when you
Input Source
or
Press AUX
the unit for further information
repeatedly on the remote
input source.
on
the
control to
select the desired
Each time you press this button, the mode of the
changes in the following sequence:
function
AV 1: for
selecting the analog signal from
(L/R) & VIDEO IN Connectors.
AV1 AUDIO IN
AV 2: for
AV2 AUDIO IN
selecting the analog signal from
(L/R) & VIDEO IN Connectors.
ote
can
also select the
FUNC. button
28
by playing the sound
speakers same as the
speakers.
can
operate both XTS-
1 and XTS- 2
woofer at the XTS- 2 mode.
on
input source by pressing
panel.
the front
temporarily disabled when changing
changing it
from 2.1 CH to 5.1 CH and it is enabled when
to
2.1 CH.
XTS pro
The unique sound quality of the LG Technology creates
the optimum sound for you to play the perfect playback
of the original sound and to feel the living sound source.
Each time you press XTS pro the
the following order.
XTS-P ON
other units connected to the AV 1
AV 2 connectors. Refer to the owner's manual
supplied with
operation.
You
rear
ote
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display
window.
You
effect
via the
The XTS- 2 mode is
Press MUTE to mute your unit.
plug
of sound at woofer
simultaneously and it can complement the
relative degrading of the sound pitch of the
repeatedly.
Mute
The
sense
for you to satisfy with.
XTS- 2: In the mode of 2 CH BYPASS, It creates the
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER
playing the movie with the weak bass
relatively to the general music, it
enforces the
XTS- 3: You
Dimmer
mode,
→
XTS-P OFF
setting changes
in
Language Codes
Use this list to
input your desired language
Subtitle, Disc Menu.
for the
following
initial
settings:
Disc Audio, Disc
Language
Code
Language
Code
Language
Code
Language
Code
Abkhazian
6566
Finnish
7073
Macedonian
7775
Slovenian
8376
Afar
6565
French
7082
7771
Somali
8379
Afrikaans
6570
Galician
7176
7783
Spanish
6983
Albanian
8381
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Ameharic
6577
German
6869
Maltese
7784
Swahili
8387
Arabic
6582
Greek
6976
Maori
7773
Swedish
8386
Armenian
7289
Greenlandic
7576
Marathi
7782
8476
Assamese
6583
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tamil
8465
Bashkir
6665
Hausa
7265
Nauru
7865
Tatar
8484
Basque
Bengali; Bangla
6985
Hebrew
7387
7869
Telugu
8469
6678
Hindi
7273
7879
Thai
8472
Bhutani
6890
Hungarian
7285
7982
Tibetan
6679
Bihari
6672
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Breton
6682
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkish
8482
Burmese
7789
Irish
7165
Polish
8076
Turkmen
8475
Byelorussian
6669
Italian
7384
Portuguese
8084
Twi
8487
Cambodian
7577
Japanese
7465
Quechua
8185
Ukrainian
8575
Catalan
6765
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Chinese
9072
Kannada
7578
Rumanian
8279
Uzbek
8590
Corsican
6779
Kashmiri
7583
Russian
8285
Vietnamese
8673
Croatian
7282
Kazakh
7575
Samoan
8377
Volapuk
8679
Czech
6783
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Danish
6865
Korean
7579
Scots Gaelic
7168
Wolof
8779
Dutch
7876
Kurdish
7585
Serbian
8382
Xhosa
8872
English
Esperanto
6978
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
6979
Latin
7665
Shona
8378
Yoruba
8979
Estonian
6984
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Faroese
7079
Lingala
7678
Singhalese
8373
Fiji
7074
Lithuanian
7684
Slovak
8375
Country
Choose
a
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Country
Code
AR
Country
Ethiopia
Fiji
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Dutch Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
Ukraine
UA
CZ
JP
PH
United States
US
DK
Japan
Kenya
Paraguay
Philippines
PY
Czech Republic
Denmark
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
TR
29
Refrnce
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
service.
contacting
Cause
Symptom
Correction
No power.
The power cord is disconnected.
Plug the power cord
wall outlet.
The power is on, but
the DVD/CD Receiver
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display is
does not work.
No
signal
output.
T he video cable is not connected
securely.
The equipment connected with the
audio cable is not set to receive DVD
no
signal output.
The audio cables
not connected
are
securely.
The audio
is
Connect the video cable into the
jacks
T urn
on
the TV.
Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
playback picture
Select the appropriate video input mode
on the TV so the picture from the DVD/
CD Receiver appears on the TV screen.
securely.
The connected TV power is turned off.
sound or
only a very low-level
sound is heard.
The
into the
lit.)
The TV is not set to receive DVD
picture.
There is
securely
connecting
The disc is
cable is
damaged.
T urn
on
the
equipment
connected with
the audio cable.
it with
Replace
a new one.
Clean the disc.
dirty.
poor.
The DVD/CD Receiver
does not start playback.
No disc is inserted.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
An
unplayable
disc is inserted.
Insert
a
playable
disc.
the disc
(Check
type, colour system and Regional code.)
The disc is
placed upside
The disc is not
The disc is
Amenu is
placed
Place the disc with the
down.
down.
within the
guide.
the TV
Place the disc on the disc tray
inside the guide.
side
correctly
Clean the disc.
dirty.
on
playback
Press the SET UP button to turn off the
screen.
menu screen.
The
Rating
Cancel the Rating function
rating level.
level is set.
or
change
the
Loud hum
heard.
or
noise is
The
plugs
and
The disc is
jacks
are
W ipe them with
a cloth
tened with alcohol.
dirty.
are
The DVD/CD Receiver is located too
close to the TV.
30
mois-
Clean the disc.
dirty.
The speakers and components
connected poorly.
slightly
Connect the
speakers
and components
securely.
Move your TV away from the audio
components.
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
be tuned in.
The antenna is
Correction
positioned
or
connected
poorly.
Connect the antenna
securely.
the antennas and connect
external antenna if necessary.
Adjust
The
of the stations is too
weak
in with automatic
signal strength
(when tuning
tuning).
No stations have been preset
or
preset
T une in the station
Preset the stations
an
manually.
Refrnce
(page 27).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
does not work properly.
The front
panel display
is too dim.
T he remote control is not
pointed
at the
Point the remote control at the remote
of the DVD/CD Receiver.
remote sensor of the DVD/CD Receiver.
sensor
The remote control is too far from the
DVD/CD Receiver.
Use the remote control within about 23
ft (7 m).
There is an obstacle in the path of the
remote control and the DVD/CD
Receiver.
Remove the obstacle.
The batteries in the remote control
flat.
Replace
Nothing
display.
is
displayed
on
the front
are
panel
the batteries with
Press DIMMER
on
new ones.
the remote control.
31
Specifications
Power
Power
Refer to main label
supply
consumption
Refer to main label
Mass
Genral
External dimensions
CD/ VD
(W
x
H
x
D)
Tuner
[MW]
x
350
mm
Laser
Semiconductor laser,
PAL
to
35°C, Operation
(1 kHz, NOP,
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
(p-p), 75 Ω, negative sync., RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1
1.0 V
108.0 MHz
87.5
Stereo mode
70W+70W(8Ωat1kHz,THD10%)
Front: 70W + 70W (THD 10 %)
-
or
65.0
32
74.0
-
MHz, 87.5
60 dB
140
522
(Mono)
1,620 kHz
-
520
or
-
1,720 kHz
450 kHz
Inputs
Outputs
AV IN
Surround*: 70W
+
70W
(8Ω
(4Ω
at 30
Subwoofer*: 150W
kHz, THD 10 %)
Hz, THD 10 %)
at 1
S-VIDEO, MONITOR, PHONES: (32 Ω,
Type
Impedance
Frequency Response
1
Way
1
Speaker
110
-
Rated
Input Power
Input Power
(1m)
70W
H
x
D)
V)
Passive Subwoofer
(LHS-55SBC)
1
Way
1
Speaker
(LHS-55SBW)
1
Way
110
-
20,000 Hz
82 dB/W
1
Speaker
4Ω
8Ω
20,000 Hz
82 dB/W
1.0
Centre speaker
Speaker
8Ω
Sound Pressure Level
x
108.0 MHz
10,000 Hz
-
Centre*: 70W
(W
-
1
10.7 MHz
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Net
LPF/A-Filter)
0.5 %
Video output
Net Dimensions
Designs
20 kHz
More than 70 dB
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Max.
nm
140 Hz to 20 kHz
More than 75 dB
(LHS-55SBS)
Suplied Acesori
650
wavelength
625/50, NTSC 525/60
Satellite
Speakrs
status: Horizontal
5% to 85%
Surround mode
Amplifer
54
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
Component
AM
x
Temperature: 5°C
S-video output
FM
kg
430
Operating conditions
Operating humidity
Video output
Video
3.9
(1m)
70W
40
-
1,500 Hz
82 dB/W
(1m)
150 W
140 W
140 W
140x222x153mm
300x116x91mm
180x400x355mm
0.95kg
1.0kg
5.6kg
Weight
300 W
Speakers..........................6 Speakercables......................6
AMloopantenna.....................1 FMantenna.........................1
Remotecontrol......................1 Batteries(AAA).......................2
V ideocable.........................1
and
specifications
are
subject
to
change
without notice.
">