advertisement
▼
Scroll to page 2
of 27
LH-T9656IA_JA2ALLA_ENG DVD RECEIVER OWNER'S MANUAL MODEL: LH-T9656IA (Main Unit: LH-T9656 Speakers: LHS-96IAS, LHS-96IAC, LHS-96IAW) R USB Before connecting up, operating or repairing this product, please read this instruction booklet carefully and completely. CAUTION: The CAUTION apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. (dripping as or vases, CAUTION Most CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER a (OR BACK) appliances dedicated That NO USER-SERVICEABLE PARTS INSIDE is, recommend be they placed upon outlet circuit which powers only that no additional outlets or branch and has circuits. Check the PERSONNEL. the Power Cord circuit; single a appliance REFER SERVICING TO QUALIFIED SERVICE concerning specification page of this owner's manual to be certain. This lightning flash with arrowhead symbol within equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric an Do not overload wall outlets. Overloaded wall loose damaged or wall outlets, outlets, extension cords, power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions frayed shock to persons. could result in electric shock The exclamation examine the cord of your appliance, and if its appearance indicates damage or deterioration, triangle within point an is intended to alert the equilateral user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. it, discontinue replaced with use an HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Slots and and to openings ensure in the cabinet reliable operation are of the provided for ventilation product and to protect it from over heating. openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or The the manufacturer's instruction have been adhered to. CLASS 1 LASER KLASSE 1 LASER PRODUKT LUOKAN 1 LASER PRODUCT LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. CAUTION: This To product employs a Laser System. proper use of this product, please read this owner's manual carefully and retain it for future reference. ensure Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments procedures other than those or the performance of specified herein may result hazardous radiation exposure. To prevent direct exposure to laser in beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. 2 Periodically unplug appliance, and have the cord replacement part by an exact authorized servicer. physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. fire. of the Protect the power cord from WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK or appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. Introduction Maintenance and Service MaintenanceandService.................3 Beforeuse.............................4 FrontPanel/RearPanel...................5 RemoteControl.........................6 Installation and a chapter before service technician. HANDLING THE UNIT Setup TVConnections.........................7 Optional Equipment Refer to the information in this contacting Connections . . . . . . . . . . .8 When shipping AntennaConnections....................8 Please Assembling and Connecting to the Speakers .9 SpeakerSystemConnection...............9 materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed HDMIConnection.......................10 at the .11 Displaying Disc Information on-screen InitialSettings.........................11 GeneralOperation......................11 Language...........................11 Display.............................12 . . . . save the the unit carton and original shipping packing factory. . the exterior surfaces clean Keeping Do not near volatile use liquids such as insecticide spray the unit. Do not leave rubber Audio..............................13 5.1SpeakerSetup.....................13 Lock(ParentalControl).................14 or plastic products in contact long period of time. since they with the unit for a leave marks the surface. on Others..............................14 Cleaning Operation Generalfeatures.......................15 Additionalfeatures.....................16 ControllingtheTV......................16 .17 Playing an Audio CD or MP3/WMA file ProgrammedPlayback..................17 ViewingaJPEGfile.....................18 PlayingaDivXMoviefile.................19 . . . . . DVDAudioDiscs.......................20 .21 PresettingtheRadioStations ListeningtotheRadio...................21 SleepTimerSetting.....................22 . . . . . . . . . . . the unit To clean the surfaces player, use a soft, dry cloth. If the extremely dirty, use a soft cloth lightly with a mild detergent solution. are moistened Do not or strong solvents such use thinner, as these as might damage alcohol, benzine, the surface of the unit. Maintaining the Unit . Dimmer...............................22 The DVD/CD Receiver is a high-tech, precision optical pick-up lens and disc drive parts worn, the picture quality could be device. If the are dirty or Mute.................................22 diminished. UsingHeadphoneJack..................22 Selectinginputsource...................22 XTS/XTSpro...........................22 Depending on the operating environment, regular inspection and maintenance are recommended after VIRTUALsound........................22 SoundMode...........................22 every 1,000 hours of For details, please use. contact your nearest authorized service center. REFERENCE LanguageCodes.......................23 AreaCodes...........................23 Troubleshooting.....................24-25 Specifications.........................26 3 Introduction Before of Types use Playable Discs DVD To ensure proper use of this product, please read this owner's manual carefully and retain for future (8cm/12cmdisc) reference. Video CD This manual provides information on the (VCD) (8cm/12cmdisc) operation Audio CD and maintenance of your DVD/CD Receiver. Should the unit require service, contact an authorized service location. (8cm/12cmdisc) In addition, this unit SVCD and CD-R About the " Symbol Display MP3, WMA, JPEG " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available on that Note: special notes and operating features. Tip: Indicates tips and hints for making the task easier. is applicable only symbol. to the disc of the following symbols represented by the one or DivX files. as the Notes rear on a regional code printed on the rear of the play only DVD discs labelled same can of the unit Regional or globe DVD and finalized DVD±R/RW DVD Audio discs number must match your DVD code or the disc cannot play. Regional MP3 Discs WMA Discs JPEG Discs DivX Discs Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world- patents issued and pending. "DTS" and "DTS Digital Surround" are Inc. Inc. clearly visible on with the one or more cover. This player's regional If you try to play a DVD with a different regional code from your player, the message "Check Audio CDs 4 a numbers in it Video CDs Systems, Systems, "ALL". Codes Most DVD discs have wide DVD-RW, DVD+RW, titles, a Code Regional This unit has unit. This unit A section whose title has play CD-RW that contains audio Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions. specific Used in this Manual Indicates can Notes: DVD video disc. Symbol or registered trademarks of Digital Theater Copyright 1996, 2003 Digital Theater All Rights Reserved." Code" appears on the TV screen. Front Panel/Rear Panel MIC 1/MIC 2 Connect a MIC 2 to both sockets. or microphone to MIC 1 or PHONES connector STANDBY/ON DISC Lights Press and hold down this button about 3 mode OPEN/CLOSE button red when the receiver is in Introducin FUNC./PLAY Tray STANDBY indicator seconds, then press repeatedly to select other function. Standby (off). VOLUME controller DISPLAY Window Remote sensor USB host Connect to a USB MONO/ST./ port of (USB memory TUNING(-/+)/ SKIP( . bb/BB > ) P./STEP multimedia etc.) buttons STOP Power Cord SPEAKER connectors FM Antenna connector OPTICAL IN connector L AUDIO R AM Loop Antenna connectors S-VIDEO OUT connector Cooling fan HDMI OUT MONITOR OUT connector COMPONENT VIDEO OUT terminals Connect to AV1 AUDIO Do not touch the inner Electrostatic permanent damage TV with Y Pb Pr Input (L/R)/VIDEO AV2 AUDIO panel. a IN Connectors Input (L/R)/VIDEO pins of the jacks on discharge may cause the inputs. HDMI output providing interface a high quality for digital audio and video. IN Connectors rear to the unit. 5 AUX Selects DVD output To BAND Select the System's tuner (FM enjoy Selects the VIRTUAL sound MARKER 0-9 numerical buttons directly select numbered or Marks options in Displays a Selects XTS pro enjoy enjoy great an audio an sound effect. b/B/v/V Selects language (DVD) or (CD). or Reverse/Forward slow To selection. menu, if available. (+/-) adjust speaker volume. PROG. playback. Accesses or removes Program menu. MEMO. (./>) STOP (x) PAUSE/STEP ( X ) PLAY (B) Enter a radio station's frequency into the tuner. CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu. REPEAT all MUTE ZOOM SLEEP REPEAT A-B sequence. ECHO VOL.(V/v) Set the Adjusts echo volume MIC VOL.(V/v) ly Adjusts microphone menu Displays the disc's Title VOLUME REVERSE/FORWARD SKIP Repeats the TUN.(-/+) (b/B) forward. Repeat chapter, track, title, menu. TITLE SCAN/SLOW(bb/BB) Search backward in the To tune in the desired radio station. . DVD disc. menu on a option Select programme of Radio. MENU Accesses the an display. PRESET(-/+) (v/V) SETUP menu menu. (left/right/up/down) Acknowledges Selects the sound mode. setup setup ENTER audio channel or removes language (DVD). Accesses On-Screen SOUND Accesses subtitle DISPLAY AUDIO Selects a Removes the sound. To menu. RETURN natural and realistic more MARKER SEARCH SUBTITLE menu. To point during playback. a SEARCH service, programme number a the multimedia files. VIRTUAL and AM bands) Select input tray. source. USB (CD/DVD). source and closes the disc Opens POWER Select the (Z) OPEN/CLOSE Remote Control at a System to turn specified time. off automatical- RESOLUTION volume the resolution your TV. Changes on depending HDMI Switches the HDMI mode to HDMI (active) and OFF (inactive). DIMMER Press to change brightness of the display window on the front panel in power-on status. during TV To control the TV. (LG TV only) (See page16) Remote Control Remote Control Operation Range Point the Remote Control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: About 30° in each direction in front of the remote Remove the the Remote Caution 6 new batteries. Never mix different battery types of batteries (standard, alkaline, etc.). installation cover on the Control, and insert (size AAA) batteries aligned correctly. sensor Do not mix old and battery with rear of two R03 and Installation and Setup TV Connections Make the of the one capabilities following connections, depending existing equipment. on of your S-Video connection Connect the S-VIDEO OUT Receiver to the S-VIDEO IN Tips: S-Video cable jack on the DVD/CD jack on the TV using the (S). Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the Video connection Connect the MONITOR OUT from the DVD/CD connections described below. Receiver to the VIDEO IN the TV Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to video cable make the best connections. Make using the supplied (V). Component Video (Color Stream ) connection Connect the COMPONENT VIDEO OUT Caution: sure directly jack jack on the DVD/CD Receiver is connected to the TV. Select the correct AV input on the DVD/CD Receiver to the on the TV using an Y Pb Pr jacks from corresponding in jacks cable (C). your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. Rear of TV VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y S Pb V Pr C Rear of DVD/CD Receiver 7 If the drive of USB device is two Optional Equipment folder is Connections 1. Connect a 2. Connect an Device move folder, VCR to the AV IN connectors. etc) optical output Player (or Digital the menu press RETURN. camera and mobile Digital supported. more, a drive If you want to after you select a or screen. phone are not to the OPTICAL IN connector. 3. Connect the USB player, etc.) of DVD to displayed on the previous port of a USB Memory (or MP3 port on the front of the unit. to the USB Antenna Connections Connect the supplied FM/AM antenna for listening to the radio. Front of DVD/CD Receiver DVD Rear of VCR Player (or Digital Device, etc) IN Connect the AM OUT Loop antenna to the AM antenna connector. VID AUDI Connect the FM Wire antenna to the FM antenna OPTICAL OUT AUDIO connector. To AUDIO OUT USB Memory, MP3 Player (or Memory Card Reader, etc.) (L/R)/ VIDEO OUT To AV IN AUDIO Notes: (L/R)/ To VIDEO prevent noise pickup, keep the AM Loop antenna away components. from the DVD/CD Receiver and other Be to fully extend the FM wire antenna. connecting the FM Wire antenna, keep horizontal as possible. L AUDIO R sure After Note: If the audio format of the digital output does not match capabilities of your DVD/CD Receiver, the receiver produce a strong, distorted sound or no sound at the will all. AM FM Wire aerial Loop aerial (supplied) (supplied) To Remove the USB from the unit 1. Choose STOP different function mode a twice in (x) or press the a row. L AUDIO 2. Remove the USB from the unit. R Notes: Don't extract the USB device in Music files (MP3/WMA), image can be played. DivX files This unit can This unit can operating. (JPEG) files and not format memory card. not use USB HUB. Recommended Memory Card (CFC), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Secure Digital Card (SD), Multi Media Card (MMC), Memory Stick Pro (MS-Pro) Compatable with : FAT16,32 Only use the memory cards recommended. Devices which require additional program Compact Flash Card - - installation when you have connected the unit to computer are In a case of not USB HDD, make sure to connect an auxiliary power cord to the USB HDD for porper operation. A primary partition of drive is supported to four. If there is an extention partition it is not supported. 8 a supported. up it as Assembling and Connecting the Speakers The front and speaker rear speakers detached from the stands. Connect the assemble the front and stands are as rear to speaker speakers cords and from speaker Speaker System Connection Connect the the supplied speaker To obtain the best possible surround sound, adjust speaker parameters (volume, distance, etc.). the illustrated. 1. Connect the terminals on speaker cords to the appropriate the bottom of each front and rear 2. Attach the front and by rotating rear the speakers to the Front speaker (Left) Front speaker (Right) speaker. stands speakers using cords. speaker screw. Rear speaker (Left surround) Rear speaker (Right surround) Center speaker InstaliodSeup Subwoofer Notes: Be sure to match the appropriate -- to --. terminal If the cables speaker on are cable to the the components: + to + and reversed, the sound will be distorted and will lack base. If you use front rating, adjust excessive speakers the volume output on the with low maximum carefully to speakers. input avoid 9 HDMI Connection HDMI TV compatible HDMI If you have a HDMI TV or monitor, you can connect it to this DVD/CD Receiver using a HDMI cable. 1. Connect the HDMI OUT jack on jack on a Receiver to the HDMI TV or monitor 2. Set the TV's the DVD/CD HDMI compatible H (H). source to HDMI (refer to TV's Owner's manual). 3. In stop mode, select HDMI mode by pressing HDMI. Press RESOLUTION the resolution you wish to to select repeatedly change. L AUDIO R Notes: The the cable connector arrow on body should face up for correct alignment with the connector the DVD/CD Receiver. If HDMI cable is not not on connected, the HDMI button is operated. Resolution You setting change the resolution for the COMPONENT VIDEO OUT by pressing RESOLUTION on the Remote Control. Available resolution settings are as can shown below. OUTPUT Available Resolution CONNECTION PAL HDMI 1920 x VIDEO OUT 1280 x 720 If there is noise or lines on the screen, please check the HDMI cable. Not all HDCP-compatible 1920 x VIDEO OUT 1280 x DVI devices will work on Tip noise appears support HDCP, the screen, or picture may be vibrated. snow pressing HDMI connection, you can change the (576p, 720p, 1080i) for the HDMI output by use RESOLUTION on the remote control. x x 1080i 720p 480p 1920 x 1280 x 1080i 720p 480p 720 x 720 x 720 x 576i 720 x 480i MONITOR OUT 720 x 576i 720 x 480i S-VIDEO 720 x 576i 720 x 480i SCART 720 x 576i HDMI (High Definition Multimedia Interface) supports single digital connection for digital output to an HDMI or DVI-equipped both video and audio easy all- on a TV. Connection to an HDMI TV while connection to HDMI to DVI or requires an HDMI cable DVI-equipped TV requires an adaptor. HDMI has the enhanced, a capability to support standard, high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and between the AV connectors), source and communication and AV devices such as DTVs. HDMI, the HDMI logo and High-Definition Multimedia Interface HDMI are trademarks licensing LLC or registered trademarks of - Notes: For About HDMI 10 x 1280 720 1080i 720p 576p 1920 : When you resolution an 1080i 720p 576p COMPONENT with this DVD/CD Receiver. If TV does not x NTSC 720p and 1080i resolution on the component video out, only non-copy protected discs can be played back. If the disc is copy protected, it will be displayed at the 480p(NTSC) resolution. 1080i, 720p, and 480p do not work with the analog video connections (MONITOR OUT & S-VIDEO OUT). The component (Y/Pb/Pr) will output to black picture in the RGB mode. If you change the resolution, the display MENU (MP3/JPEG/DivX) size is changed. If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read TV's owner's manual then set the resolution that your TV can accept. Caution: Changing the resolution when the recorder is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the recorder and then turn it on again. Displaying Disc Information Initial on-screen You can loaded 1. display various information about the disc on-screen. Press DISPLAY to show various playback To information. The items 2. displayed differ depending playing status. type or You can change Title select an (Track) -- the disc by pressing v / V and setting by pressing b / B. Current title display and exit the Menu: Press SETUP to display the menu. SETUP will take you back to initial item select the or on Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 11 to 14 (or track). (or tracks). A second press of screen. To go to the next level: Press B on the Remote Control. To go back to the previous level: Press b on the Remote Control. number/total number of titles Chapter Current chapter number/total number of chapters. Time Elapsed playing time. Audio Selected audio language or channel. -- GENERAL OPERATION -- -- Subtitle Angle Sound -- -- -- Selected subtitle. Selected angle/total number of If no button is Press SETUP. The Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired press B to move to the third level. 4. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 5. Press SETUP angles. Selected sound mode. Note: screen 1. 2. pressed for a display disappears. few seconds, the on- or Setup menu appears. PLAY to exit the option Setup InstaliodSeup then menu. LANGUAGE LANGUAGE OSD English Disc Audio Original Disc Subtitle Off Disc Menu Original Move Select OSD Select a language for the Setup menu and on-screen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio (disc audio), subtitles, and the disc menu. Original -- Refers to the track original language the disc was Other To select another in which recorded. language, press number corresponding 4digit number according to the language code list on page 23. If you enter the wrong language code, -- buttons then ENTER to enter the press CLEAR. 11 DISPLAY DISPLAY TV 16:9 Aspect Display Widescreen Mode Move TV Select Aspect 4:3 Select when -- 16:9 Display Display -- a Select when standard 4:3 TV is connected. a 16:9 wide TV is connected. Mode Mode setting works only when the TV Aspect mode is set to "4:3". Letterbox -- Displays a wide picture with bands portions of the screen. on the upper and lower Panscan on do not fit. 12 -- Automatically displays the entire screen the wide and cuts off the picture portions that AUDIO 5.1 Each DVD disc has Set the receiver's variety of audio output options. AUDIO options according to the a type of audio system you Press ENTER and 5.1 On Speaker Front L 0ms Sync Size Small Volume 0 dB Distance 0 m Test Move Off Select Select With the DVD* 1 Control (DRC) format, you can hear a program's soundtrack in the most accurate and realistic thanks to audio 3. Adjust options using Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this Select Dolby Digital only Return Use b / B to select the desired 4. effect. Move 2. presentation possible, digital technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). *1: Enter speaker. v / V / b / B buttons. Press ENTER to confirm your selection. Returns to the previous menu. speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer) a Certain Set Vocal to On only DVD is The karaoke channels playing. when a multi-channel karaoke on the disc will HD AV can Video Since the Sync adjust delay time between signal in milli-seconeds. 0→10→20→... →300 speaker settings are prohibited by Digital licensing agreement. the Dolby Size mix into normal stereo sound. a InstaliodSeup selection Speaker Note: Vocal You menu On Vocal Dynamic Range Speaker Setup AUDIO Select Speaker Setup DRC HD AV for the built-in 5.1 channel appears. AUDIO 5.1 following settings surround decoder. 1. use. Speaker Setup Make the a Audio signal and change speaker settings settings. fixed, you are cannot the Volume Press b / B to speaker. (-5dB adjust the output 5dB) level of the selected ~ Distance If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the Press b / B to speaker. (You same time. the Distance of the selected adjust adjust can't front / Woofer speakers) Test Press b / B to test the of each signals the volume to match the volume of test memorized in the Front Left Rear speaker. Adjust signals system. (L) Right (R) → Center → → Front Rear Left (L) Right (R) → → SubWoofer 13 LOCK Area Code (Parental Control) Enter the code of the LOCK Rating Unlock Password **** Area Code US whose standards area used to rate the DVD video disc, based on were the list on page 23. Select "Area Code" 1. on the LOCK then menu press B. Follow 2. Move step 2 as shown previous paragraph (Rating). Select Select the first character 3. using Rating Blocks of rated DVDs based playback content. Not all discs are 1. Select the LOCK "Rating" on on Press B and select the second character 4. their v / V buttons. using v / V buttons. rated. menu Press ENTER to confirm your Area code selection. 5. then press B. 2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. OTHERS OTHERS Input password and press ENTER. Enter it again and press ENTER to verify. If you make a mistake a before pressing ENTER, 3. Select a Rating rating PBC On DivX(R) Registration Select press CLEAR. from 1 to 8 using the v / V buttons. Rating one (1) has the most rating eight (8) is the least 1-8: restrictions and Select Move restrictive. PBC Unlock: If you select unlock, parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating press SETUP to exit the menu. Set Playback enter Off: Video CDs with PBC or change password. 1. Select Password 2. Follow step 2 as on the LOCK shown above then press B. (Rating). change the password, press ENTER when the "Change" option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 3. Press SETUP to exit the 1. 2. Press SETUP to the display as are played to the same information, visit www.divx.com/vod. 1. Select 2. Press ENTER while "Select" is selected and the "DivX(R) Registration" option then press B. registration code will appear. Use the registration code to purchase clear it using the Setup rent the www.divx.com/vod. Follow the instructions and a disc for playback on this unit. menu. Input 6-digit number "210499" and press ENTER. The password is cleared. or VOD service at download the video onto the played according Audio CDs. videos from DivX can are provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more menu. you Off. We forget your password If you forget your password, following steps: or DivX(R) Registration menu To If you to On the PBC. way can (PBC) On: Video CDs with PBC selection, then Password You Control 3. Press ENTER to exit. Note: All the downloaded videos from DivX be 14 played back on this unit. VOD can only Operation General features Buttons Z (OPEN X (PAUSE) / CLOSE) Opens (. closes the disc or During playback, Press X SKIP Discs Operations / >) tray. press X to pause repeatedly to playback. play Frame-by-Frame. During playback, press next chapter/track or to current chapter/track. SKIP Press SKIP . twice briefly (. to >) to go to the beginning of the or return to the step back to the previous chapter/track. SCAN (m / M) During playback, press SCAN (m or M) repeatedly required scan speed. DVD : 5 steps (X2, X4, X8, X16, X100) DivX disc, Video CD : 4 steps (X2, X4, X8, X16) WMA/MP3, Audio CD : 3 steps (X2, X4, X8) to select the REPEAT During playback, desired DVD Video discs: Video A-B press REPEAT repeatedly to select a repeat mode. Chapter/Title/Off CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off During playback, each press of A-B button to select point point B and repeats a sequence from point A (Starting point) to point B (End point). A and Press REPEAT A-B exit. ZOOM During playback or pause mode, press ZOOM to enlarge image (3 steps). You can move through the zoomed picture using bBvV the video buttons. TITLE If the current DVD title has appears on the screen. a menu, the title Otherwise, the disc menu menu may appears. DVD MENU (SUBTITLE) The disc menu appears on the screen. During playback, press SUBTITLE repeatedly language. to select a desired subtitle (AUDIO language) During playback, press AUDIO repeatedly different audio language or audio track. (AUDIO channel) Press AUDIO to hear a repeatedly during playback to hear a (STER., LEFT or RIGHT). different audio channel SLOW Pause mode, press SLOW (m or M) to select the required speed. DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16) Video CD : T (1/2, 1/4, 1/8, 1/16) 15 Notes general features: on Last Scene If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback This receiver memorizes last that is viewed. The last The A-B on some scene from the last disc remains in memory the disc from the receiver or cancels. Zoom may not work Memory scene even if you remove switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled. DVDs. repeat function is available only in the current title. Note: This receiver does not memorize the Additional features switch off the receiver before Time Search To start playing Press DISPLAY 1. on the disc: Input the required appropriate system mode for your system. If NO DISC appears in the display window, press and hold P./STEP on the front panel or Remote Control for select start time in hours, minutes, and right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. Press ENTER to confirm. Playback the not be You a starts from the with NTSC-TV. PAL: Select when DVD/CD Receiver is connected with PAL-TV. Marker start can desired point the TV screen a on the disc. The Marker icon appears to enter up to nine Your Remote Control is Receiver on To Recall or 1. During disc search menu Clear a seconds, press b / B to select scene. playback or a marker clear. starts from the Or, Press CLEAR and the marker You on can play any marker by the marker search menu. the Remote using different Control, press the TV inputting 2. The POWER be sure on Remote Control Setting (+/-), and operate Remote Control Codes for LG TV Hold POWER (TV) and press CHANNEL( E / D ) button on or off. until the TV Note: the other code appears when you leave the unit in mode for about five minutes. or use operate your the Remote Control with the LG TV. Due to the variety COMPANY cannot (LG particular TV, try originally and Gold of codes used Star) by manufacturers, guarantee that the operate every model of LG TV. 16 used to the LG TV. supplied Stop VOLUME are If the Remote Control does not screen saver a its number Screen Saver The (to operate to press the TV first. (TV), CHANNEL(E/D), INPUT buttons to select operated. device), repeatedly number is erased from the list. 4. Before operate for your LG TV. To switch the Remote Control mode press SEARCH. The marker appears on the screen. playback, Press ENTER and marked capable of operating your DVD/CD limited functions of LG TV. as the device to be Marked Scene number that you want to recall 3. well Follow the instructions below to 1. Within 10 as briefly. Repeat markers. 2. the TV Controlling from up to nine memorized marker, press MARKER at the playback To enter points. displayed. Select when DVD/CD Receiver is connected Marker Search To enter than 5 seconds to be able to system does not coincide with system of your TV, normal colour picture may NTSC: selected time. more system (PAL, NTSC). a When the selected seconds from left to 4. disc if you the disc. TV "--:--:--" appears. 3. a play You must select the during playback. Press v / V to select the time clock icon and 2. of to Select System at any chosen time scene commencing remote OUR control will Playing This unit an Audio CD Audio CDs play can or or MP3/WMA file MP3/WMA files The program function enables you to store your favorite tracks from any disc in the receiver memory. A recorded media. Once you insert CD, MP3/WMA files recorded media an a menu the TV on or 2. 0:00:00 0:00:00 Select a track the on "List", then press PROG. or " additional tracks place 1/104 MP3 Program disc. (Add)" icon then press ENTER to place the selected track on the "Program" list. Repeat to 1/12 List a select functions. Refer to page 15. Audio CD Insert Audio CD and MP3/WMA Discs: screen. appears Press v / V to select a track/file then press PLAY or ENTER and playback starts. You can use variable playback 1. contain 300 tracks. can program MP3/ WMA/ Audio CD Audio Programmed Playback JPEG on the list. Program List Track1 Music Folder 1 Track2 Music Folder 2 Note: Track3 Music Folder 3 Track4 Music Folder 4 Track5 Music Folder 5 Track6 You Music Folder 6 Track7 Music Folder 8 add all tracks in the disc. Select Tips: Press MENU to move to the next page. PHOTO word on top of the menu as compatibility is 4. Press PLAY highlighted. with this player is 5. follows: ? list have file extension other than an / ".wma". CD-R ? If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to 1. format should be ISO 9660 File names 2. playback MP3 / WMA files.We recommend Easy-CD Creator, which creates an ISO normal played once. playback from programmed (or track of AUDIO CD a list and then press PLAY. a incorporate ? They should not ? The total number of files an / ? " * : ? a disc. The a desired Off(No display): a does not Track from play repeatedly. "Program" 2. discs and recordings to optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that permission is required Use vVto select the track that you wish to Program list. the copyright erase " Press CLEAR. Alternatively, select (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks Erasing on the the list. Complete Program Use v / V to select " (Del all)", List then press ENTER. in order to download MP3 / WMA files and music from the Internet. Our company has no right to permission. Permission should always be Operation List 999. meet certain technical standards in order to achieve repeat mode. repeats the current track ALL: repeats all the tracks on programmed list. from the the disc should be less than requires repeat TRACK: Erasing 1. <>letc. on playing Press REPEAT to select ? maximum of 8 letters and .mp3 or .wma extension. contain special letters such as must Tracks Press REPEAT when ? should have This DVD/CD Receiver in icon appears. that you use 9660 file system. ? resume Repeat Programmed MP3/WMA file ".mp3" ? physical Playback begins - The DVD/CD Receiver cannot read a To playback, MP3/WMA) - that has ENTER to start. select Sampling frequency: within 32 48 kHz (MP3), within 24 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) - or the order in which you programmed the tracks. Playback stops after all of the tracks on the - ? icon Select the track you want to start playing on the "Program" list. Press MENU to move to the next "Program" MP3 / WMA disc ? ( Add All)" page. CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or a limited " then press ENTER. 3. On can Music Folder 7 Track8 grant such sought from Note: The programs are also cleared when the disc is removed. owner. 17 Viewing a JPEG file JPEG JPEG disc limited with this player is This unit Before can play discs with JPEG files. playing JPEG recordings, read the Recordings on right. compatibility follows: as JPEG Insert 1. disc and close the a The PHOTO menu notes on ? on see an on-screen the TV screen. of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels some PHOTO as Preview List upon the size and number of JPEG a long time for the DVD/CD Receiver to read the disc's contents. If you don't display after several minutes, tray. appears Depending files, it could take --- 2760 x 2048 and burn another disc. pixels JPEG Folder 1 JPEG Folder 2 ? JPEG Folder 3 JPEG Folder 4 The total number of files and folders on the disc should be less than 999. JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 ? JPEG Folder 8 ? Press v / V to select 2. folder, and press ENTER. a A list of files in the folder appears. If you are in a file list and want to return to the Folder previous remote to list, use the v / V buttons on ? ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. While 3. viewing a file, you can press STOP previous menu (JPEG menu). to move to the Note: When viewing a JPEG file, the resolution is changed 480p if the resolution set to 1080i. You 720p or can change the resolution for 480p. Tips: There four Slide : Speed options (Normal), >>> (Fast) and II (off). Use v /V /b /B to highlight the Speed. Then, use b / select the option you want to use then press ENTER. > are (Slow), >> If you set Speed option to Off, Slide is B to not active. Slide Show Use vVbBto press highlight the (Slide Show) ENTER.(You can not change resolution) then Still Picture 1. Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide PAUSE/STEP Moving (. or >) once while or viewing a previous file. picture Press b / B 18 press again. to advance to the next To rotate picture or to another File Press SKIP picture show, press PLAY during showing clockwise or a picture to rotate the counter-clockwise. Ensure that all the selected files have the extensions when the and press ENTER. highlight Some discs may be incompatible due to a different recording format or the condition of disc. copying If the files have ".jpe" please them File rename names without able to be read though the files Windows by ".jpg" layout. ".jpeg" extensions, ".jpg" file. ".jpg" extension will not be this DVD/CD Receiver. Even are Explorer. or as into the CD shown as JPEG image files in Playing DivX Movie file a DivX disc as this DVD/CD Receiver you Using can play compatibility with this player is limited follows: DivX disc. ?A vailable resolution size of the DivX file is under 1. Insert disc and close the a the TV on appears tray. The MOVIE menu 800x600 screen. ? The file (W x name H) pixel. of the DivX subtitle is available by 45 characters. MOVIE 0:00:00 List ? Movie Folder 1 If there is impossible code to express in the DivX as mark on the file, it may be displayed Movie Folder 2 Movie Folder 3 Movie Folder 4 " " _ display. Movie Folder 5 Movie Folder 6 Movie Folder 7 ? Movie Folder 8 If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. 2. Press v / V to select a folder, and press ENTER. ? A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to interleaved, either video or audio is outputted. and highlight If the video and audio structure of recorded file is not press ENTER. Playable 3. 4. If you want to view a particular file, press v / V to highlight a file and press ENTER ? or On CD with a Playable Subtitle format SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) ? Tips: move to the next page. MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted. Playable ? Be sure DivX file to select "SUBTITLE ON" mode by playing the subtitle file every time before a Playable "AC3 . ? When the subtile has the more than two languages in file, original subtile is only available. The DivX files in your memory card can ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", ", "3IVX ". Audio format ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 32 48 kHz (MP3), 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) - within 24 ? not be Codec format "DIVX3.xx "MP43 Notes: pressing DivX file ", ".mpg ", ".mpeg ", ".divx" PLAY. Press STOP to exit. Press MENU to ".avi - Operation - - played. The microphone You can during not does not work adjust the DivX file Notice for a DivX file. sound mode and VITUAL sound playing. displaying If the subtitle does not during playing the Divx subtitle display properly during playback, press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle is displayed properlyp 19 DVD Audio Discs DVD Audio is success disc format building provide high quality, a new of DVD to Moving multi-channel audio for on Some DVD Audio discs divide content into different the uncompressed, experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on a new groups. Your player enables you to quickly access different groups during playback via the on-screen display. 1. Press DISPLAY 2. Press 3/4 to select the disc itself. DVD Audio provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can (compared A to another GROUP be delivered with up to 24 bits of data to 16 bits for a standard CD). used for music, either Advanced Resolution multi- quality that is closer to the artist's recording or for longer recordings. Many DVD on-screen text, such as a or in stop mode. icon. the numbered buttons (0-9) to select group number. Note: channel sound Audio discs contain Press 1/2 3. on Sometimes the author of the disc creates hidden DVD Audio disc contains up to seven times capacity of a CD. This additional space is master Group can the data typical during playback artist biographies, playlists, or lyrics. Some DVD Audio discs contain photo galleries or video clips. content that can only be accessed by entering a password. If the lock icon appears on the TV screen, enter the password (sometimes you'll find it on the disc's jacket cover or on a web site). This password control isn't dictated by your DVD/CD Receiver it is --- a function of the disc. Since the available authoring of DVD Audio Discs varies, display choices might not be for the disc you're playing. Viewing another PAGE of the some on-screen Note: To enjoy of DVD maximum sound Audio, you must quality use output (5.1CH AUDIO OUT jacks Receiver). and surround effect 5.1 channel on analog audio the DVD/CD Since DVD Audio discs can hold a lot of content, there on the disc. are various ways to see what's available 1. Press DISPLAY during playback. 2. Press 3/4 to select 3. Press 1/2 to select Page a icon. page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. Note: Since the of the available 20 authoring of DVD Audio Discs varies, display choices might not be for the disc you're playing. on-screen some the Radio Stations Presetting You can Before preset 50 stations for FM and AM make tuning, sure Preset radio stations in the DVD/CD Receiver's (MW). that you have turned down the volume. AM (MW) on the Remote Control until FM appears in the display And then every time you press 2. window. display the TUN.(-/+) for frequency indication about two seconds until the starts to Scanning stops a AM (MW) repeatedly Control to select the appears in the the Remote on preset station you want. Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. change, when the DVD/CD Receiver tunes in or window. Press PRESET +/- 2. Press and hold Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the Remote Control repeatedly. 3. station. - Press PROG/MEMO A on The last received station is tuned in. BAND, FM and AM then release. 4. radio stations" (see "Presetting Press BAND until FM 1. or (MW) changes alternately. 3. memory first left). Press BAND 1. to the Radio Listening on the Remote Control. To turn off the radio preset number will flash in the display window. Press POWER to turn the DVD/CD Receiver off Press PRESET +/- 5. select the on preset number you Press PROG/MEMO 6. the Remote Control to on select another function mode want. the Remote Control again. 7. Repeat steps To listen to non-preset radio stations Use manual The station is stored. For manual 3 to 6 to store other stations. or a station with Press TUN.(-/+) repeatedly station manually. a in weak step signal s elect a Press and hold PROG/MEMO for about two seconds in the again, display window the stations are If you have accidentally entered into the "ERASE ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the "ERASE ALL" display will go off by itself and change to normal mode. 2. TUN.(-/+) repeatedly. tuning, preset radio station directly the number buttons on the Remote press 1 then 9 a (within 3 For your reference If an FM program is Press MONO/ST. disappears stereo in the on seconds). noisy the front display panel so that "ST." window. There will be no effect, but the reception will improve. Press again to restore the stereo effect. To If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. change step preset radio station directly. For example, to listen to preset station 4, press 4 on the Remote Control. To listen to preset station 19, the button Note: To can use Control to select To clear all the stored stations appeared in 3 to tune in the To and then press PROG/MEMO cleared. press tuning press and hold TUN.(-/+) for about two seconds on the front panel. You and "ERASE ALL" is automatic tuning, For automatic To tune in or (DVD/CD, AUX, USB). the preset number, follow the steps improve reception Reorient the supplied antennas. a 5-6 as above. 21 Timer Sleep You XTS/XTS pro Setting set the DVD/CD Receiver to turn off can at automatically a specified The SLEEP indicator and display sleep sleep XTS ON window. The When check the time can Press SLEEP. The playing the movie with the relatively to the general music, it before the DVD/CD remaining sense remaining disabled when changing changing NORMAL VIRTUAL sound mute your unit in can the telephone, window. order, for example, to "MUTE" indicator flashes in the Using Headphone Connect a stereo headphone PHONES connector. Selecting input VCRs can use or plug ( 3.5mm) Press AUX when Source Display Effect 2.1 ch. VIRTUAL 3D STEREO 5.1 ch VIRTUAL Multichannel sound Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players. source the QBS sound. into the other units connected to the AV on setting 3D STEREO IN. Refer to the owner's manual for further information press VIRTUAL the Jack speakers are automatically disconnected plug in a headphone (not supplied). supplied operation. repeatedly on the Remote input source. with the unit Multichannel sound Control to The Multichannel sound makes a 5.1 ch feel 10.1 select the desired ch sound therefore this mode Each time you press this button, the mode of the function changes in the following sequence: which you are involved with sound and you feel detailed sound. AV1/2 IN it to 2.1 CH. XTS-P and XTS mode tune off Press MUTE to mute your unit. : (L/R) for selecting the analog signal from AV1/2 AUDIO & VIDEO IN Connectors. AV2 OPT: for selecting the optical digital signal from AV2 You the Notes: function is available when Optical input only Sampling Frequency is 32 96kHz. You can also select the input source by pressing FUNC. button on the front panel. the other unit's then press repeatedly to select input seconds, source. emotion can enjoy surround sound simply by selecting pre-programmed sound fields according to program you want to listen to. (2 ch. sound only) of the BYPASS ON STAGE STUDIO CLUB THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX →BYPASS... → → → → → → → ~ Press and hold down this button about 3 a can → The provides Sound Mode one VIDEO IN & OPTICAL IN Connector. 22 temporarily from 2.1 CH to 5.1 CH and it is enabled when repeatedly. Mute You via the Note: The XTS mode is Press the DIMMER you of sound at woofer for you to satisfy with. BYPASS, It creates the high display effect by playing the sound source rear speakers same as the front speakers. window. This function will change the brightness of the display window on the front panel during in power-on status. The weak bass sound enforces the In the mode of 2 CH time appears in the Dimmer display unique XTS ON Receiver turns off. answer XTS-P ON... creates the Note: You → sound quality of the LG Technology optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. setting SLEEP180→150→120→90→80→70→60→50→40→ display NORMAL → XTS-P ON 30→20→10→OFF You in time. time appears in the Each time you press SLEEP the changes in the following order. 2. setting changes the Press SLEEP to set the desired 1. Each time you press XTS pro the following order. time. Note: Initial sound mode is BYPASS → HALL Language Codes Use this list to Disc input your desired language for the following initial settings: Audio, Disc Subtitle, Disc Menu. Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 8373 8471 8479 Area Codes Choose a area Area code from this list. Code AF Area Code Area Code Area Code ET Malaysia MY Saudi Arabia SA FJ Maldives MV SN Finland FI Mexico MX France FR Monaco MC Senegal Singapore Slovak Republic BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Heard and McDonald Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU Afghanistan Argentina AR Ethiopia Fiji Australia AU Austria AT Belgium SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY KW Portugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Czech Republic Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg UG 23 Troubleshooting Check the following guide for the possible cause of a before problem contacting Correction Cause Symptom No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Plug the power cord wall outlet. securely Insert that the DVD or, is ? picture. a disc. (Check into the audio CD indicator in the DVD does not work. No service. The TV is not set to receive DVD signal ? Select the mode output. display lit.) appropriate the TV on so video the input picture from the DVD/CD Receiver appears TV screen. ? The video cable is not connected ? no sound or The connected TV power is turned off. ?T ? The ? a connected with the equipment not connected are ? ?T ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. connecting cable does not start is damaged. dirty. poor. The DVD/CD Receiver input mode of the so Connect the audio cable into the The power of the equipment connected with the audio cable is turned off. ? is Select the correct jacks securely. securely. playback picture the TV. you can hear the sound from the DVD/CD Receiver. signal output. The audio cables urn on audio receiver audio cable is not set to receive DVD ? The Connect the video cable into the ? very low-level sound is heard. only urn on the equipment connected with the audio cable. ? Insert a it with disc. new one. (Check that the DVD, audio CD indicator in the DVD playback. is ? An the jacks securely. securely. There is on unplayable disc is inserted. ? or display lit.) Insert disc a playable disc. the (Check type, colour system and Regional code.) ? ? The disc is placed upside The disc is not placed ? down. Place the disc with the within the guide. ? Place the disc correctly ? The disc is ?Amenu is ? dirty. on the TV ? The Rating screen. level is set. ? heard. or noise is ? The disc is ? The ? dirty. speakers and components poorly. are ? The DVD/CD Receiver is located too close to the TV. 24 the disc tray guide. menu screen. Cancel the rating Rating function or change level. Clean the disc. Connect the speakers and components securely. connected ? on inside the Press the SETUP button to turn off the Loud hum side Clean the disc. the ? playback down. ? Move your TV away from the audio components. Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset or preset ?T ? une in the station Preset the stations manually. (page 21). stations have been cleared (when tuning by scanning preset stations). The Remote Control ? properly. The Remote Control is not remote does not work ? sensor pointed at the ? of the DVD/CD Receiver. The Remote Control is too far from the ? DVD/CD Receiver. ? There is an Point the Remote Control at the remote sensor Use the Remote Control within about 23 ft obstacle in the path of the of the DVD/CD Receiver. (7 m). ? Remove the obstacle. ? Replace ? Press DIMMER Remote Control and the DVD/CD Receiver. ? The batteries in the Remote Control are flat. The front display panel is too dim. ? Nothing display. is displayed on the front panel the batteries with on new ones. the Remote Control. 25 Specifications Power Genral Refer to main label Net 3.9 kg 430 x External dimensions (W x H x D) conditions CD/ VD AM [MW] Amplifer mm 5°C to Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 35°C, Operation 625/50, More than 75 dB (1 kHz, NOP -6 (1 kHz, at 1W position) (20 kHz LPF) (p-p), 75 Ω, negative sync., RCA jack x 2 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x (Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 1 output 87.5 - 108.0 MHz or 65.0 - 26 74.0 MHz, 87.5 60 dB 140 1 1 108.0 MHz 522 (Mono) 8,000 Hz - 1,620 kHz - or 520 - 1,720 kHz 450 kHz 155W Surround mode Front: 155W (* Depending on the sound mode settings and the source, there may be no sound output.) Surround*: 155W + 155W (Rated Output Power 130W, 4Ω at 1 kHz, THD 10 %) 155W (Rated Output Power 130W, THD 10 %) + Centre*: 155W + 155W Subwoofer*: 225W AV Inputs Outputs (Rated Output Power 130W, 4Ω at 1 kHz, THD 10 %) (Rated Output Power 180W, 3Ω at 30 Hz, THD 10 %) IN, OPTICAL AUDIO S-VIDEO, MONITOR, PHONES: (32 Ω, Type Impedance Frequency Response 2 Speaker Center Way 3 Speaker 80 Sound Pressure Level - Rated Input Power Max. Input Power NetDimensions(WxHxD) Net Weight (1m) 155 W 310 W 300x1350x300mm 5.35kg to change speaker V) Passive Subwoofer Way 3 Speaker (LHS-96IAW) 1 1 Way 4Ω 18,000 Hz 86 dB/W 1.0 (LHS-96IAC) 2 4Ω subject - x 10.7 MHz Stereo mode are LPF/A-Filter) 1.0 V output specifications 20 kHz dB, 0.5 % Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency and nm More than 70 dB (LHS-96IAS) Designs 650 laser, wavelength NTSC 525/60 150 Hz to 18 kHz Front/Rear Speakrs status: Horizontal 5% to 85% COMPONENT VIDEO OUT FM 295 x Temperature: S-video Video 57 Operating Operating humidity Video Tuner Refer to main label supply consumption Weight Power without notice. 80 - 18,000 Hz 86 dB/W (1m) 155 W 310 W 500x160x155mm 1.73kg Speaker 3Ω 40 - 1,500 Hz 82 dB/W (1m) 225 W 450 W 240x450x390mm 10.5kg P/NO : 3834RT0004F
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project