LH-T252SC JA4CLLA_English DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T252SC (Main Unit: LH-T252 Speakers: LHS-25SCS, LHS-25SCW) R Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely. this P/N: 3834RH0093B Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within an user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient to constitute magnitude a risk of electric About the shock to persons. The exclamation mark within is intended to alert the important operating an equilateral triangle about the presence of and maintenance (servicing) user instructions in the instructions accompanying the symbols Indicates hazards itself or other special operating Indicates tips WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK MOISTURE. WARNING: Do not install this such as a book case or equipment in confined space a similar unit. likely to cause material damage. Indicates product. HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR for instructions and hints for harm to the unit features of this unit. making the task easier. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. CAUTION: This DVD/CD receiver employs a laser OTES ON COPYRIGHTS: system. It is forbidden CAUTION: via cable, This DVD/CD receiver To ensure proper use employs of this a Laser System. product, please read this owner's manual unit tion carefully and retain it for future reference. Should the require maintenance, contact an authorized service loca(see service procedure). Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. play permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. 2 law to copy, broadcast, show, broadcast in public, or rent copyrighted material without by ___________________________________ ___________________________________ Ta ble of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............20 Playing an Audio CD and MP3/WMA Disc . . . . . 20 BeforeUse..............................4-5 Pause.............................20 PlayableDiscs...........................4 Precautions.............................5 MovingtoanotherTrack................20 RepeatTrack/All/Off...................20 NotesonDiscs..........................5 Search.............................20 AboutSymbols..........................5 FrontPanelandRearPanel..................6 JPEGDiscOperation......................21 ViewingaJPEGdisc.....................21 RemoteControlOverview....................7 SlideShow.........................21 StillPicture.........................21 Preparation Connections............................8-10 TVConnections.........................8 .8 ExternalEquipmentConnections SpeakerSystemConnection................9 . . . . . . . . . . . AerialConnections........................9 SpeakerPositioning......................10 BeforeOperation.......................11-16 Mini Glossary for Audio Stream & Surround Mode.................................11 SoundMode...........................11 On-ScreenDisplay.......................12 InitialSettings........................13-16 GeneralOperation....................13 Language..........................13 Display............................13 Movingtoanotherfile.................21 Torotatepicture......................21 ProgrammedPlayback.....................22 RepeatProgrammedTracks................22 .22 ErasingatrackfromProgrammeList. 22 Erasing the Complete Programme List DivXDiscOperation.......................23 . . . . . . . . . . . . . . AdditionalInformation......................24 LastConditionMemory...................24 ScreenSaver...........................24 ControllingtheTV.......................24 OperationwithRadio......................25 Presettingtheradiostations................25 Listeningtotheradio.....................25 OtherFunctions...........................26 SleepTimerSetting......................26 Dimmer...............................26 Audio..............................14 Mute.................................26 Lock(ParentalControl)................15 XTS(ExcellentTrueSound)................26 XTSpro...............................26 Others.............................16 Operation Reference DVDorVideoCDOperation...............17-19 PlayingaDVDandVideoCD...............17 LanguageCodeList.......................27 CountryCodeList.........................27 Troubleshooting........................28-29 Specification.............................30 GeneralFeatures.....................17-19 MovingtoanotherTITLE...............17 17 Moving to another CHAPTER/TRACK . . . . . SlowMotion.........................17 Still Picture and Frame-by-Frame Playback . 18 Search.............................18 Repeat............................18 RepeatA-B.........................18 TimeSearch........................18 MarkerSearch.......................19 Zoom..............................19 SpecialDVDFeatures....................19 TitleMenu..........................19 DiscMenu..........................19 ChangingtheAudioLanguage. ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . .19 .19 Subtitles...........................19 3 Introducin Before Use Playable Discs ote When (8cm/12cmdisc) Video CD (VCD) (8cm/12cmdisc) SVCD and CD-R or MP3, WMA, JPEG DVD-RW, DVD+RW, CD-RW that contains audio titles, play or DTS-encoded gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit. (8cm/12cmdisc) can playing volume Audio CD addition, this unit DTS-encoded CDs CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the DVD In on a DivX files. Disc-related terms Title (DVD only) The main film content Depending on the conditions of the the CD-R/RW ment or itself, some cannot be CD-R/RW played on labeled side recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs the unit. Do not attach any seal or label to either side (the side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. otes on or the recorded feature content additional feature content, or music album. Each title is assigned a title reference number DVDs and Video CDs playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available other functions may be added. Make sure to also refer to the instructions or supplied Regional played on the unit. code of the DVD/CD receiver and DVDs This DVD/CD Receiver is designed and manufactured for playback of region "4" encoded DVD software. The region code on the labels of some DVDs 4 indicates which type of player can play those discs. This unit can only play DVDs labeled "4" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. enabling easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. On (VCD) video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. with the DVDs and Video CDs. Some DVDs made for busi- purposes may not be able to be you to locate it Scene Some 4 accompanying or otes ness or of video CDs Types There are two types of video CDs: equipped with PBC (Version 2.0) (Playback control) functions allow you to interact Video CDs PBC with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) After the unit Handling When shipping the unit The original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. To keep Do not radio, or or turn off the use volatile such liquids, contact with the unit for leave marks Cleaning a use a store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable increase inside the car. light, Cleaning discs Fingerprints or temperature as and dust on the disc can distort the picture reduce sound with a clean quality. Before playing, clean the disc cloth. Wipe the disc from the centre out- wards. on insecticide spray, as plastic products in long period of time. They will a or the surface. the unit Do not To clean the cabinet Use playing, the exterior surfaces clean the unit. Do not leave rubber near discs Storing Precautions soft, dry cloth. If the surfaces soft cloth benzene, or moistened with lightly solution. Do not use thinner, are a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static use spray intended for About vinyl records. Symbols of the unit. About the To obtain a clear picture The DVD/CD Receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. "" may appear on the TV screen during operation. This icon means the function explained in this owner's manual is not available About the disc on Discs DVD VCD2.0 Disc Handling get on playback by the edges VCD1.1 side of the disc. so that fingerprints the surface. Do not stick paper that symbols DVD video disc. for instructions following symbol is represented by the symbol. one to the disc specific of the DVD and finalized DVD±R/RW. Video CDs with the PBC (playback control) function. Do not touch the Hold the disc on A section whose title has applicable only Notes symbol display tape on the disc. (playback control) function. will not CD or Video CDs without the PBC Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. DivX DivX disc. 5 Introducin Front Panel and Rear Panel STANDBY/ON STANDBY indicator MIC Connect a microphone Lights red when the receiver is in Standby mode (off). to MIC sockets. DISC PLAY Tray Press and hold down this button about 3 seconds, then press repeatedly to select other function. TUNING(-/+)/ SKIP(-/+) OPEN/CLOSE button DISPLAY Window MONO/STEREO/ PAUSE/STEPSTOP POWER CORD SPEAKER Connectors FM Antenna Connector MONITOR OUT Connector AUX IN 66 8 6 6 6 MONITOR OUT AUXILIARY INPUT Connectors AM Do not touch the inner panel. Electrostatic damage to the unit. 6 Loop Antenna Connectors pins of the jacks on the rear discharge may cause permanent VOLUME controller Remote Control Overview POWER OPEN/CLOSE Opens DVD Select the output source (CD/DVD) Selects or DVD (FM and AM MUTE 0-9 numerical buttons directly or select numbered options in SUBTITLE sound. AUDIO SOUND MRAKER - an audio an SEARCH PRESET/ language (DVD) audio channel (CD). menu Accesses On-Screen Selects the TV's b/B/v/V - . Selects DVD disc. or REVERSE SCAN playback. Displays the disc's Title VOLUME To radio station's Starts playback. (x) Stops playback. ZOOM CLEAR the DVD video track number on the Enlarges program menu or a mark MARKER SEARCH on the DIMMER a menu. Press to REPEAT Repeat chapter, track, title, (X) playback STOP into menu, if available. (B) Pause the tuner. Removes Radio. (+/-) PAUSE/STEP menu. frequency or adjust speaker volume and TV volume. PLAY MEMO. a selection. TITLE PROG. Enter menu To tune in the desired radio station. SKIP SKIP(>) Program the TUN(-/+) (b/B): forward*/go to next chapter or track. or removes menu. Select programme of TV backward*/go to beginning of current chapter or track or go to previous chapter or track. Accesses in the option an PRESET/CH(+/-) (v/V): Search Search source. (left/right/up/down) Acknowledges forward. SKIP(.) FORWARD display. ENTER SLOW-/+(t/T) Reverse/ Forward slow menu. INPUT SCAN-/+(bb/BB) Search backward MARKER SEARCH DISPLAY MENU menu on a menu. .. SETUP Accesses the setup point during playback. a Displays + Selects the sound mode. setup language (DVD). SEARCH or or removes subtitle a Marks CH SOUND MODE Accesses speakers. Removes the AUDIO Selects automatically. MARKER sound effect. enjoy great off RETURN XTS To a Selects natural and realistic more at System to turn specified time. SUBTITLE XTS pro enjoy only) SLEEP Mute the a menu. To TV (LG MUTE service, programme number a source. Set the bands) Select input To control the TV. SLEEP System's tray. TV BAND tuner and closes the disc AUX accesses Select the (Z) display dur-ing all. image. change brightness window on the front of the panel in power-on status. REPEAT A-B Repeats sequence. MIC Remote Control ECHO VOL.(V/v) Adjusts echo volume. Adjusts microphone Remote control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: VOL.(V/v) About 30° in each direction in front of the remote sensor Remove the remote volume. battery battery cover on control, and insert AAA) batteries correctly. with installation the rear two R03 and of the (size aligned Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Introducin Connections TV Connections Make the of the following connections, depending capabilities of your existing equipment. one on Rear of TV VIDEO INPUT AUDIO INPUT SCART INPUT ip Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the R L L best connections. V Caution Make sure the DVD/CD Receiver is connected to the TV. Select the correct AV directly your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy input on protection system. VIDEO Cable AUX IN T MO Rear of DVD/CD receiver SCART-RCA OR O Adaptor Video connection Connect the MONITOR OUT from the DVD/CD Receiver to the VIDEO IN the TV video cable jack jack on using the Rear of DVD/CD receiver TV/MONITOR supplied (V). (SCART type) Tip: If you want to connect the DVD/CD receiver to a TV with SCART socket, use the SCART-RCA adapter (T). External Equipment Connections Connection Rear of VCR (L/R) jacks on the DVD/CD receiver to the AUDIO OUT (L/R) jacks on the VCR, LD player, etc using the audio cables. (or LD player, etc) Connect the AUX IN AUDIO OUTPUT L VIDEO OUTPUT R Tip: Press AUX these on the remote control to select input to jacks. AV 1 appears on the Display Window. AUX IN 66 8 6 6 6 MONITOR OUT 8 Connections (Continued) Speaker System Connection Connect the the speakers using To obtain the best possible Front supplied speaker surround Center speaker (Right) cords. sound, adjust the speaker parameters (volume, distance, etc.). Front speaker (Left) speaker Prepa tion AUX IN 66 666 8 MONITOR OUT Rear speaker (Right surround) Rear speaker (Left surround) Subwoofer otes Be to match the sure speaker cable to the appropriate terminal on the components: + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. If you front use speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. Aerial Connections Connect the Connect supplied FM/AM aerial for listening the AM Loop aerial to the AM aerial to the radio. connector. Connect the FM Wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial (supplied) (supplied) AUX IN 66 8 6 6 6 MONITOR OUT otes To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure After fully extend the FM wire aerial. connecting the FM Wire aerial, keep to it as horizontal as possible. 9 Connections (Continued) Speaker Positioning In the of normal case position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and sub- woofer). If you want to subwoofer. play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a ?F r ont speakers According to your listening position speakers to 45 degree. ? for speakers equal distance. And by hearing position set up the interval between Centre The ? set up the speaker centre speakers and front speakers are ideally the same height. But normally place it above or below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear ? case of speakers a smaller above 60 room size, if the audience is 90 than the listener's - cm near to the rear wall set the rear speakers opposite each ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Front Speaker (Left) Speaker (Right) Speaker (Left) Rear Speaker (Right) Speaker Positioning Example 10 other, and set the Before Mini Operation Glossary for Audio Stream & Surround mode Sound Mode You VCD2.0 DVD VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. When DVD is inserted You change can the Digital After you select 2 channel a) The Bypass - II creates five full-bandwidth output channels This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or Music Movie ) by pressing " -" sources. D 2CH or Matrix tonal colorations. MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. (For example 1 ENG D 5.1 CH or 4 ENG (II) from two-channel 2 ENG button, press SOUND After you select 5.1 channel b) DTS Logic by " 5.1 CH Pro (For example AUDIO ) by pressing button repeatedly. D Dolby mode this feature is used. 2CH " Output pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when 3 ENG Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital promark, you can enjoy gram source. If you play DVDs with even better sound quality, greater spatial accuracy, and improved dynamic range. Audio AUDIO indicator will be "BYPASS" indicator button, press SOUND button. displayed on the TV screen. will be only displayed on the display window. When Video CD is inserted Each time you press SOUND button, the sound mode of Video CD is changed on the display window in the following order. BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → → → → → → → → → MUSIC mode: The Music mode is for use with any stereo music recordings. ote MATRIX mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the audio to After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. mono. Each time you press SOUND button, the sound mode of Audio CD is changed on the display window in the fol- The Left, Right and Stereo of audio channel will be displayed the TV order. BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → Software with multichannel surround audio according to the way it was recorded. signals is played screen. When CD is inserted lowing BYPASS on → → → → → → → → For your reference ? You identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. can - - - otes When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). When you use a microphone except Karaoke function, you can't enjoy 5.1 channel output. Only 2 channel sound will out by the influence of the microphone system. 11 Prepa tion Before Operation (Continued) On-Screen You Display the general playback status on screen. Some items can be changed using the To use the on-screen display: display can the TV menu. Example: On-Screen Display during playing DVD Video Selection Method Items Title Number 1/3 b / B, Numbers ENTER Press DISPLAY during playback. 1 2Pressv/Vtoselectanitem. highlighted. Chapter Number 1/12 0:20:09 Numbers, ENTER Audio Press b / B to 3 change the the number buttons if use inputting the title You setting. appropriate (e.g. number). For press ENTER to execute the some can also A-B Repeat title Repeat sequence Resume Action play setting. language Angle prohibited or AUDIO point ABC 1 ENG SUBTITLE otes If no Selection Method Track Number button is screen for 10 pressed display disappears. all of the features seconds, the on- (or PBC 1/3 Time search Sound b / B, Numbers ENTER mode) Numbers 0:20:09 ENTER b/Bor Audio Channel 12 b/B Example: On-Screen Display during playing VCD not available provide b/B Bypass Items Some discs may not shown below. b/Bor 1/3 Sound from this b/Bor functions, PLAYBACK STATUS/RESTRICTIONS Title language and Digital Audio Output mode Subtitle B, Numbers ENTER Time search The selected item is b / AUDIO Bypass b/B Before Initial Operation (Continued) LANGUAGE Settings the menu, you can make various adjustments to items such as picture and sound. You can also By using set Setup for the subtitles and the language among other things. a item, To see For details on display the menu. SET UP will take you back to initial To go to the next level: v 4 5 Select menu v v audio), appears. option then the second level. will be shown the current setting for the B to move to screen item, as well as alternate setting(s). / V to select the second desired / V move option to the third level. Original Prepa tion setting language for the Setup menu on-screen display. DVD you prefer for the audio track subtitles, and the disc menu. Original: disc and was language Refers to the original language (disc in which the recorded. Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 28. If you enter the wrong language code, press CLEAR on the then press ENTER to confirm your selection. Some items require additional steps. or Select remote control. to select the desired Press SET UP a Select the then press B to Use Disc Menu Disc Audio / Subtitle / Menu / V to select the desired selected 3 Off OSD Operation setup 2 press Use Disc Subtitle Move Press SET UP. The Original screen. the remote control. on General Use Disc Audio A second press of To go back to the previous level: Press b on the remote control. The English and exit the Menu: Press SET UP to Press B Setup menu, each Setup menu OSD pages 13 to 16. display 1 LANGUAGE PLAY to exit the DISPLAY setup DISPLAY menu. TV 16:9 Aspect Display Mode Widescreen Move TV Aspect DVD 4:3: Select when a 16:9: Select when Mode Display Display Mode Select standard 4:3 TV is connected. a 16:9 wide TV is connected. DVD setting works only when the TV Aspect mode is set to "4:3". Letterbox: upper and bands on the Automatically displays the wide picture on screen and cuts off the portions that do not fit. Panscan: entire Displays a wide picture with lower portions of the screen. the 13 Before Operation (Continued) AUDIO Distance Each DVD disc has If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the a variety of audio Set the DVD/CD Receiver's AUDIO the type of audio system you output options. options according to use. listener at the AUDIO 5.1 sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press b / B to Select Speaker Setup DRC On Vocal On time. same adjust the Distance of the selected speaker. ote You Rear Move 5.1 and Select Test DVD Speaker Setup adjust the Distance of Center speaker speakers (Left & Right) only. can Press b / B to test the Select speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. Adjust of each signals the volume to match the memorized in the Front Left system. (L) Right (R) Rear speaker. volume of test signals → Center → → Front Rear Left (L) Right (R) → → SubWoofer AUDIO Dynamic Range Control (DRC) Speaker Size DVD Front L DivX Small With the DVD Volume 0 dB Distance 2 m Test program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing dialog intelligibility. Off Select Move Return Enter Speaker Select format, you a a otes The DRC function works ote Certain speaker settings are prohibited by Digital licensing agreement. the Dolby depending Dynamic Range Compression on Set Vocal to On Since the speaker settings settings. are fixed, you cannot change Volume Press b / B to adjust the output speaker. (-5dB +5dB) ~ level of the selected of may differ the DVD disc. DVD Vocal Size only during playback recorded discs. Dolby Digital The level of 14 hear Set DRC to On for this effect. speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Center Speaker, SubWoofer, Rear speakers (Left), or Rear speakers (Right)) the can DVD is mix into playing. a only when a multi-channel Karaoke The karaoke channels normal stereo sound. on the disc will Before LOCK Operation (Continued) Password (Parental Control) You LOCK Unlock Rating **** Password Country can on 2 Follow shown left control information certain scenes on to that may not be suitable of these discs contain parental scenes Many that applies to the complete the disc. Movies and disc scenes are or 3 4 Press SET UP to exit the rated your children from being able to view material you believe is unsuitable. 1 2 "Rating" on 1 the LOCK menu then press the 6-digit number security code is and the 2 Enter a new code Rating, Password and Code features, you must input the security code you created. If you have not yet entered prompted to do so. a security Country 4-digit code you are Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3Selectaratingfrom1to8usingthev/V buttons. one (1) menu. has the most restrictions is the least restrictive. Code can "210499" on clear it the using setup menu cleared. described above. as ote When " " appears on the TV screen, and then press SET UP to move to the INPUT PASSWD press STOP (x) menu. Country Code DVD Enter the code of the Rating 1-8: Rating and rating eight (8) or then press ENTER. forget your Security Input setup B. To access the then press B. (Rating). "Change" If you forget your security code you the following steps: to control feature allows you to block access below the rating you input, thereby preventing Select menu Select parental scenes as highlighted. Enter the new 4-digit code, Input it again to verify. from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. The 2 step the LOCK "New" is DVD for children to view. change password. or Select Password If you Some movies contain enter 1 Code Move Rating (Security Code) were country/area used to rate the DVD video in the reference 1 Select 2 Follow whose standards disc, based on the list chapter. "Country Code" on the LOCK menu then press B. step 2 as shown left Select the first character 3 Shift 4 the second (Rating). using v / V buttons. using B button and select character using v / V buttons. cursor the Unlock If you select and the disc unlock, parental control is plays not active 5 in full. Press ENTER to confirm your country code selection. ote If you set a rating for the DVD/CD Receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are is available on not played unless an alternate scene the disc. The alternative must have the rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. same Press ENTER to confirm your 4 then press SET UP to exit the rating selection, menu. 15 Prepa tion Before Operation (Continued) OTHERS ? Display the number which you can OTHERS PBC ? On This rental video has 7 views left. A view ends when you Select DivX(R) Registration video, or stop playback, play turn off your Do you want to use one of your 7 views Set No expired. This rental is VCD Playback Control (PBC) to On or played according are expired. Off. ? On:Video CDs with PBC now Select Move PBC The rental has been different player. Yes ? a to the Display the authorization error. PBC. Off:Video CDs with PBC played are the same way as Audio CDs. DivX(R) Registration You can DivX show the DivX DRM Management) Registration Your Please the registration use DivX(R) (Digital Right code for your unit code is this code to the To learn XXXXXXXX register this player with Video On Demand service. This will allow you to rent and using : only. DivX(R) more purchase videos Video On Demand format. go to www.divx.com/vod The Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental an encrypt movie file. ote If you rent the DivX VOD file, it has several viewing limits as show below. 16 options of This video player play is not authorized to this video. watch the file. DVD or Playing Video CD a on General Features DVD and Video CD Playback Setup Tu rn Operation DVD VCD2.0 the TV and select the video VCD1.1 input ote source con- system: Turn and select the the audio on input source system 1 to open the disc When tray. 2 facing up. When a double-sided DVD is inserted, make the side you want to play is facing down. Press OPEN/CLOSE READING appears starts (Z) to close the menu might The a menu screen is tray. appear displayed may be displayed first after Video CD which contains a menu. menu screen DVD or loading a to can move follows: button (0-9) to select a title number. to another CHAPTER/TRACK VCD2.0 When a title disc has DivX on a more disc has than chapter/track as Press . or one more than track, you one chapter can move or a to another follows: > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISP. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track DVD number Use the bBvVbuttons to select the VCD2.0 Use the number buttons to select the track you want to view. Press RETURN to return to the setting the operating procedures depending on the disc. using may differ Follow the instructions on the each menu screen. You also may set PBC to Off under setup. for For two-digit numbers, press (0-9) in rapid succession. Slow Motion 1 the 4-digit code must VCD1.1 player pause. will enter SLOW mode. 3 To t e xit slow motion or t 1/2 or T 1/2 required speed: t (backward), or T (forward). mode, press PLAY. ote Slow motion discs that have code different from your receiver. The this player is 4 (four). The during (see page 15). region code. play Press SLOW -/+ 2 1/16, on DVDs may have a Your receiver will not VCD2.0 DVD 1/8, t 1/4 1/16, T 1/8, T 1/4 be entered and/or the disc must be authorized Control", the numbered buttons Use the SLOW -/+ to select the If Parental Control is set and the disc is not within the "Parental (0-9). ote otes Rating settings (not authorized), the numbered buttons menu screen. and the exact menu using title/chapter you want to view, then press ENTER to start. Press TITLE or MENU to return to the menu screen. Menu title, you DISP., then press the appropriate numbered DVD instead. If one Press Moving the TV screen, and playback If playback does not start, press PLAY. In some cases, the disc as than more DVD sure on automatically. disc has a another title Load your chosen disc in the tray, with the label 3 to another TITLE Moving (Z) use connected to the DVD/CD Receiver. Press OPEN/CLOSE otherwise, all operations described the remote control. Some features may also be available on the Setup menu. nected to the DVD/CD Receiver. Audio Unless stated region region code playback in reverse is not applicable for Video CD. a for 17 Operation DVD Video CD or General Features Still Picture and VCD2.0 DVD 1 Operation (Continued) (continued) Repeat Frame-by-frame playback VCD1.1 during playback. The DVD/CD Receiver will now repeat 1 2 DivX Press PAUSE/STEP To go into PAUSE A-B a sequence in title: Press A-B at your chosen A- appears briefly Press A-B the TV on A-B appears briefly begins. starting point. screen. at your chosen end again on the TV screen, and the sequence You To cancel the sequence, press A-B can advance the PAUSE/STEP picture frame-by-frame by pressrepeatedly on the remote control. 3 Time Search Search VCD2.0 DVD Press m or M VCD1.1 or M now go into SEARCH mode. 2 required speed: mX2, mX4, mX8, mX16, MX2, MX4, MX8, (backward) MX16, MX100 (forward). With or CD, the Search speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). To e xit Press DISP. or CLEAR. VCD1.2 during playback. The play appears on the playing on-screen elapsed playing Within 10 seconds, press 3/4 to select the Time Search icon in the on-screen display. 3 Within 10 seconds, use the number buttons to enter the required start time. Enter hours, min- utes, and seconds from left to right in the box. VCD2.0 DVD DVD Video Discs To To REPEAT Playback To icon appears on the TV screen. e xit To icon appears the TV on screen. Repeat mode, press REPEAT a third Repeat - Off icon appears the TV on screen. Repeat Track/All/Off repeat the track currently playing, press REPEAT. The To Repeat Track icon appears on the TV screen. repeat the disc currently playing, press REPEAT The a second time. Repeat All icon appears e xit on the TV screen. REPEAT Repeat mode, press a third time. The Repeat Off icon appears on the TV screen. ote On a the setup 16. 18 invalid time, playback the disc. If you will continue from the current on ote time. To an starts from the selected time point. second time. a Repeat Title Video CDs 3 4 Within 10 seconds, press ENTER to confirm the start time. enter Repeat Chapter num- repeat the title currently playing, press The 2 Repeat Chapter/Title/Off - remove bers. DivX REPEAT. The 1 VCD1.1 repeat the currently playing chapter, press The 3 time of The "-:--:--" appears in the Time Search box. SEARCH mode, press PLAY. Repeat 2 dis- the current disc. If you enter the wrong numbers, press CLEAR to the numbers you entered. Then enter the correct 1 at screen. The Time Search box shows the 2 Video a VCD2.0 repeat The Time Search function allows you to start any chosen time on the disc. 1 to select the repeatedly mX100 DVD point. DivX during playback. The DVD/CD Receiver will Press m 3 a VCD1.1 mode. 2 ing 1 VCD2.0 DVD Video CD with menu to PBC, you use the must set PBC to Off Repeat on function. See page On a Video CD with the setup menu to PBC, you use the must set PBC to Off Repeat function. on DVD Video CD or General Features Marker Search You can nine start points To enter 1 a (continued) VCD1.1 DVD from playback can a VCD2.0 memorized During playback playback, the contents of DVD Video discs: Menus point. Up to DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select option. Or, use the 1/2/3/4 buttons to highlight your selection, then press ENTER. press MARKER when reaches the spot that you want to memorize. the TV screen briefly. 1 to enter up to nine Marker Repeat step on a on points disc. To Recall During 1 2 3 Playback 4 menu will appear on the Within 10 seconds, press 1/2 to select 2 a screen. Otherwise, the disc The menu can list camera guage and subtitle title. menu menu will appear scene. The disc may appear. angles, spoken lanoptions, and chapters for the DVD is menu displayed. the MARKER SEARCH menu, press SEARCH. the Audio Changing DivX Marked Scene disc SEARCH. playback, press 1 2 3 Repeat steps 4 5 The MARKER SEARCH menu DVD Language Press AUDIO During on Press MENU. will start from the Marked a menu, the screen. Disc Menu Press ENTER. To clear a Marker number that you want to recall. remove If the current title has the SEARCH. playback, press The MARKER SEARCH To Press TITLE. Marked Scene disc an DVD Title Menu 1 a DVD Checking mark, follow these steps. disc DVD Features Special be memorized. The Marker icon will appear 2 Operation (Continued) will appear on different the repeatedly during playback audio language or audio track. to hear a VCD2.0 VCD1.1 screen. Press 1/2 to select the Marker number that you want to erase. Changing the Audio Channel Press AUDIO different Press CLEAR. repeatedly during playback to hear a audio channel (STER., LEFT or RIGHT). The Marker number will be erased from the list. 2 and 3 to erase additional Marker numbers. To remove the MARKER SEARCH menu, press SEARCH. Zoom DVD during playback If you press ZOOM increases up to four 2 or still playback activate the Zoom function. 400% size → Use the 1 2 zoomed appears, the feature is not available Subtitles different VCD1.1 DVD repeatedly, to see the The subtitle file of the DivX file is displayed only smi, srt and sub. to If there is no information or there is file, "1/1" etc a code that are displayed. can level steps. 800% 3 4 magnification the disc. DivX repeatedly during playback subtitle languages. not read in the DivX the on otes The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 If Press S-TITLE VCD2.0 Press ZOOM ote → 1600% size buttons to move through the picture. ote The zoom function may not work for some DVDs. 19 Operation Audio CD Playing Disc an MP3/WMA Disc or Audio CD and MP3/WMA MP3 CD Operation Repeat You WMA play can recordings on MP3/WMA formatted play can CD-ROM, CD-R, or CD-RW discs. 2 Press REPEAT to select Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press ? ENTER and playback a disc. disc. The repeat icon ? desired a repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on a disc. does not Off(No display): play repeatedly. starts. 1/12 0:00:00 playing on a WMA appears. ? or MP3 CD title/chapter/all/track a 1 Press REPEAT when The DVD/CD Receiver PLAY Track/All/Off Audio CD List Program Track1 Track8 Track2 Track3 Track3 Track12 Track4 Track7 Track5 Track6 Track6 Track9 Track7 Track1 Track8 Track10 Search CD 1 Press m or WMA Mduring playback. The receiver will 2 Press m MP3 now M or go into SEARCH mode. repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). 3 To e xit SEARCH required MX2, or mode, press PLAY. MP3 / WMA 1. Press v / V to select folder, and press ENTER to the folder contents. see 2. a Press v / V to select ENTER. a MP3 / WMA disc track then press PLAY or starts. Playback with this player 48 Sampling frequency: within 24 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32- 192kbps (WMA) kHz (MP3), The DVD/CD Receiver cannot read an limited ? as compatibility is follows: within 32 - - 0:00:00 1/104 ? MP3 List Program ? 1-Music1 - MP3/WMA 2-Music2 file that has 3-Music3 a file extension other than 4-Music4 ".mp3" / ".wma". 5-Music5 6-Music6 7-Music7 ? CD-R ? If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is otes If you are in file list a on to return to the Folder the MP3/WMA list, use the v / V to impossible and want menu mend that highlight an and press ENTER. ? Press MENU to On a move to the next page. CD with MP3/WMA file and JPEG switch MP3/WMA and JPEG menu. MP3/WMA top of the or lighted. Then, JPEG word use on file, you can ? Press TITLE and is menu b / B to select MP3/WMA highJPEG or physical format should be ISO 9660 playback MP3 / WMA files. We recomyou use Easy-CD Creator, which creates to ISO 9660 file File names system. should have must incorporate They should not a maximum of 8 letters and .mp3 or .wma extension. contain special letters such as an / ? *:"<>letc. ? The total number of files on the disc should be less than 999. then press ENTER. This DVD/CD Receiver Pause MP3 CD 1 Press PAUSE/STEP WMA playback, PAUSE/STEP again. Moving Press . track or or to return In CD, of audio the track number during playback. 20 or to CD step back to go using directly are press to the WMA to the next track. previous to any optimal playback quality. Pre-recorded DVDs automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MP3 briefly during playback to go to the beginning of the current briefly recordings achieve > Press . twice case press PLAY to another Track discs and to meet certain technical standards in order to during playback. 2 To return to requires track, the numbered buttons track. enter (0-9) these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that required permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. JPEG Disc Viewing This unit a Operation JPEG disc JPEG JPEG disc limited play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. 1 can Insert disc and close the tray. The JPEG menu appears on the TV notes on ? a screen. with this receiver is follows: as upon the size and number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc's contents. If you don't Depending see an on-screen display after several minutes, Operation of the files may be too large reduce the resolution of the JPEG files to less than 2760 x some JPEG 2048 List compatibility Preview --- pixels and burn another disc. JPEG Folder 1 ? JPEG Folder 2 The total number of files and folders on the disc JPEG Folder 3 should be less than 999. JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 ? Some discs may be incompatible due to recording format or the condition of disc. ? Ensure that all the selected files have the JPEG Folder 8 2 Press v / V to select folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder remote to 3 a list, the v / V buttons use ? the on and press ENTER. highlight extensions when File them to be read While Windows to the to move ".jpg" layout. the files ".jpe" or ".jpeg" extensions, please as ".jpg" file. without names If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. viewing a file, you can press STOP previous menu (JPEG menu). into the CD different If the files have rename ? copying a by are ".jpg" extension will not be able this DVD/CD Receiver. Even shown as JPEG image though files in Explorer. ips ? ? There four Slide : Speed options > (Slow), >> (Normal), >>> (Fast) and II (off). Use vVbBto highlight the Speed. Then, use b / B select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. are SLIDE SHOW Use vVbBto to JPEG the highlight (Slide Show) then press ENTER. JPEG STILL PICTURE 1. Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide PAUSE/STEP show, press PLAY (. or >) to advance to the next or once JPEG during showing ture clockwise or while previous viewing a picture file. JPEG TO ROTATE PICTURE Press b / B press again. MOVING TO ANOTHER FILE Press SKIP or a picture to rotate the pic- counter clockwise. 21 Programmed Playback MP3 CD WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert a disc. REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Press REPEAT when Press REPEAT to select disc. The repeat icon a desired repeat mode. JPEG ? Program a 1/104 MP3 List playing appears. below. 2. 0:00:00 can Program List Track1 Track8 Music Folder 1 Track2 Track3 Music Folder 2 Track3 Track12 Music Folder 3 Track4 Track7 Music Folder 4 Track5 Track6 Music Folder 5 Track6 Track9 Music Folder 6 Track7 Track1 Track8 Track10 ? ? TRACK: repeats the current track ALL: repeats all the tracks on programmed list. Off(No display): does not play repeatedly. Music Folder 7 ERASING A TRACK FROM "PROGRAM" Music Folder 8 LIST Audio CD Menu 2 Select or a select track " on the MP3/WMA Menu 1. to 2. (Add)" place erase "List", then press PROGRAM icon then press ENTER to the selected track on the "Program" list. place Repeat Use vVto select the track that you wish to from the Program list. additional tracks on Press CLEAR. Or, select " (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks on the list. the list. ote You can add all tracks in the disc. Select " (Add All)" icon then press ENTER. ERASING THE COMPLETE PROGRAM LIST 3 Select the track you want to start playing on the "Program" list. Press MENU to move to the next Use v / V to select page. 4 or ENTER to start. Playback begins programmed the tracks. the order in which you Playback stops after all of the tracks "Program" resume 5 back, list have played normal playback select a on in the once. from track of AUDIO list and then press PLAY. 22 (Del all)", then press ENTER. ote Press PLAY To " programmed playCD (or MP3/WMA) The programs are also cleared when the disc is removed. DivX Disc Using this DVD/CD Receiver you Insert 1 Operation a appears disc and close the on the TV can play DivX disc. DivX disc tray. The DivX menu as compatibility with this player is limited follows: screen. ?A v ailable resolution size of the DivX file is under 720x576 1/12 0:00:00 (W x H) pixel. DIVX ? List The file name of the DivX subtitle is available 20~40characters Movie Folder 1 Movie Folder 2 Movie Folder 3 ? Movie Folder 4 Movie Folder 6 Movie Folder 8 ? Press v / V to select a folder, and press ENTER. A ? list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / on " express in the DivX mark on the dis" _ If the number of the screen frame is 1 V buttons impossible code to may be displayed as play. Movie Folder 7 2 (different by language). If there is file, it Movie Folder 5 by the remote to and press highlight ENTER. 3 If you want to view a particular file, press v / V to highlight a file and press ENTER 4 Press STOP to exit. PLAY. not 30 per operate normally. If the video and audio structure of recorded file is not interleaved, either video or audio is out- putted. ? If the file is recorded with GMC, the unit supports some of 1-point of the record level. * or second, this unit may over GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 There encoders, like DivX are or Xvid, have this option. different levels of GMC 1-point, 2-point, or 3-point encoding, usually called GMC. otes ? Be to select "SUBTITLE ON" mode before sure DivX file ? ENTER every time. When the Subtile has more than two languages in the original ? playback The Pro a by pressing Subtile is logic only file, available. II Sound mode is not available for DivX file. Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". ? Sampling frequency: within 32 48 kHz - within 24 ? Bit 40 (MP3), 48kHz (WMA) rate: within 32 320kbps (MP3), 192kbps (WMA) - - - 23 Operation Additional Information Last Condition Memory This DVD/CD Receiver Controlling DVD memorizes the settings user for or Your remote control is DVD/CD Receiver the last disc that you have viewed. Settings remain in memory even if you remove the disc from the receiver the TV as capable well as of operating your limited functions of LG TV. Follow the instructions below to operate for your LG TV. switch off the receiver. If you load latest stop a disc that has its position is settings memorized, automatically recalled. the Before 1 using the remote select the device to be To s witch different control, press the TV operated. the remote control mode device), be to (to operate a to press the TV first. sure otes Settings are stored in memory for use any time. This DVD/CD Receiver does not memorize settings of disc if you switch off the DVD/CD Receiver before commencing to play it. 2 The POWER, CH(E/D), VOLUME (+/-), and INPUT buttons on remote control are used to operate the LG TV. a Screen Saver The appears when you leave the DVD mode for about five minutes. Setting Remote Control Codes for LG TV Hold POWER and press PR/CH(+/-) repeatedly until the TV on or off. (E/D) button screen saver player in Stop ote If the remote control does not TV, try the other code originally supplied Due to the variety or use 24 the remote control with the LG TV. of codes used OUR COMPANY cannot control will operate your particular by manufacturers, guarantee that the operate every model of LG TV. remote Operation Presetting You can preset make tuning, with Radio the radio stations 50 stations for FM and AM sure Before (MW). that you have turned down the vol- Preset radio stations in the DVD/CD Receiver's memory first (see "Presetting radio stations" on the left). ume. Press BAND 1 AM 2 3 the remote control until FM on (MW) appears in the display or 2 until the 3 then release. when the DVD/CD Receiver tunes in station. "TUNED" and "STEREO" appear in the 4 stereo a program) PR(D/E) on Press PROG./MEMO. 6 again. remote the remote control weak a in step 3 manually. Press and hold PROG./MEMO. for about two seconds and "CLEAR ALL" is appeared in the and then press PROG./MEMO. cleared. display window again, the stations are by automatic tuning in step or 2. TUN+ B on the tuning, itself and change preset radio station directly a the number buttons on the remote control a (within 3 seconds). For your reference If an FM program is Press MONO/ST. disappears stereo If you have accidentally entered into the "CLEAR ALL" and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" will go off etc.,). preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 To clear all the stored stations display or tuning, press TUN- b control repeatedly. can use to select signal repeatedly or to tune in the station AV 1, to 6 to store other stations. station with Press TUNING (DVD/CD, or press and hold TUN- b or TUN+ B for about two seconds on the remote control. You a want. - To select To tune in preset station you Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. For automatic Repeat steps 3 the remote control on For manual The station is stored. 7 to select the Use manual want. on PR(D/E) repeatedly To listen to non-preset radio stations the remote control to select 5 the preset number you Press select another function mode preset number will flash in the display window. Press window. Press POWER to turn the DVD/CD Receiver off the remote control. on FM appears in the or To turn off the radio window. display Press PROG./MEMO. A (for display (MW) Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. on panel for about two seconds frequency indication starts to change, Press BAND until AM The last received station is tuned in. or the front Scanning stops 1 window. And then every time you press BAND, FM and AM (MW) changes alternately. Press and hold TUNING to the radio Listening in the effect, but the button again on noisy the front panel so that "ST." display window. There will the reception will improve. be no Press to restore the stereo effect. To improve reception Reorient the supplied antennas. to mode. ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change the preset number, follow the steps a 5-6 as above. 25 Operation Other Functions Sleep Timer Setting XTS You You can cally 1 at a specified time. Press SLEEP to set the desired The SLEEP indicator and play 2 set the DVD/CD Receiver to turn off automati- sleep sleep time. time appears in the dis- window. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. (Excellent True Sound) enjoy the vivid stereophonic sound of the digital original source without any signal distortion. can Each time you press XTS during 2 channel mode, the setting changes in the following order. XTS-1→XTS-2→XTS-3→NORMAL... Tips: XTS- 1: sound XTS- 2: source front Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. of sound at woofer effect via the by playing rear speakers the sound same as the speakers. You can operate both XTS- 1 and XTS- 2 simultaneously and it can complement the relative degrading of the sound pitch of the woofer at the XTS- 2 mode. repeatedly. Mute sense for you to satisfy with. In the mode of 2 CH BYPASS, It creates the high display This function will change the brightness of the display window on the front panel during in power-on status. Press the DIMMER playing the movie with the weak bass relatively to the general music, it enforces the XTS- 3: Dimmer When ote The XTS- 2 mode is temporarily disabled when from 2.1 CH to 5.1 CH and it is enabled when changing changing it to 2.1 CH. XTS pro The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. Each time you press XTS pro the the following order. XTS-P ON 26 → XTS-P OFF setting changes in Language Codes Use this list to your desired language for the Disc Audio, Disc Subtitle, Disc Menu. input following initial settings: Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 7771 Somali 8379 Afrikaans 6570 Galician 7176 7783 Spanish 6983 Albanian 8381 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Ameharic 6577 German 6869 Maltese 7784 Swahili 8387 Arabic 6582 Greek 6976 Maori 7773 Swedish 8386 Armenian 7289 Greenlandic 7576 Marathi 7782 8476 Assamese 6583 Guarani 7178 Moldavian 7779 Tagalog Tajik Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tamil 8465 Bashkir 6665 Hausa 7265 Nauru 7865 Tatar 8484 Basque Bengali; Bangla 6985 Hebrew 7387 7869 Telugu 8469 6678 Hindi 7273 7879 Thai 8472 Bhutani 6890 Hungarian 7285 7982 Tibetan 6679 Bihari 6672 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Bulgarian 6671 Interlingua 7365 Persian 7065 Tu rkish 8482 Burmese 7789 Irish 7165 Polish 8076 Tu r kmen 8475 Byelorussian 6669 Italian 7384 Po r tuguese 8084 Twi 8487 Cambodian 7577 Japanese 7465 Quechua 8185 Ukrainian 8575 Catalan 6765 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Chinese 9072 Kannada 7578 Rumanian 8279 Uzbek 8590 Corsican 6779 Kashmiri 7583 Russian 8285 Vietnamese 8673 Croatian 7282 Kazakh 7575 Samoan 8377 Volapuk 8679 Czech 6783 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Danish 6865 Korean 7579 Scots Gaelic 7168 Wolof 8779 Dutch 7876 Kurdish 7585 Serbian 8382 Xhosa 8872 English Esperanto 6978 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 6979 Latin 7665 Shona 8378 Yoruba 8979 Estonian 6984 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Faroese 7079 Lingala 7678 Singhalese 8373 Fiji 7074 Lithuanian 7684 Slovak 8375 8471 8479 Country Codes Choose a country code from this list. Country Afghanistan Argentina Code Code Code ET Country Malaysia MY Saudi Arabia SA FJ Maldives MV SN AR Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE Chile CL Hong Kong Hungary HU NG Switzerland CH China CN India IN Nigeria Norway NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM Pa raguay PY Ukraine UA Czech CZ JP Philippines PH United States US KE Poland PL Uruguay UY KW Por tugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Republic AF Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg Country Code Country Ethiopia Fiji SG SK UG 27 Refrnce Tr oubleshooting Check the following guide for the possible cause of a before problem service. contacting Cause Symptom Correction No power. ? The power cord is disconnected. ? the power cord wall outlet. The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Insert does not work. No Plug that the DVD or, audio CD indicator in the DVD display is a disc. (Check lit.) picture. ? The TV is not set to receive DVD signal ? output. Select the on the TV appropriate video input mode so the picture from the DVD/ CD Receiver appears ? The video cable is not connected ? securely. There is no sound or ?Turn ? The ? equipment connected with the audio cable is not set to receive DVD The playback picture is poor. The DVD/CD Receiver does not start jacks The audio cables not connected are Select the correct input mode of the you can hear the sound from the DVD/CD Receiver. ? securely. so Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. ?Turn ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. ? Insert ? screen. the TV. on audio receiver signal output. ? the TV securely. The connected TV power is turned off. a on Connect the video cable into the ? very low-level sound is heard. only into the securely connecting cable is damaged. dirty. the on equipment connected with the audio cable. playback. a it with disc. new one. (Check that the DVD, audio CD indicator in the DVD or display is lit.) ? An unplayable disc is inserted. ? Insert a (Check the disc system and Regional code.) type, colour ? The disc is placed upside down. ? disc. playable Place the disc with the playback side down. ? The disc is not placed within the guide. ? Place the disc inside the ? The disc is ?Amenu is dirty. on the TV screen. on the disc tray correctly guide. ? Clean the disc. ? Press the SET UP button to turn off the menu screen. ? The Rating level is set. ? Cancel the the Loud hum or noise is ? The plugs and jacks are dirty. ? Wipe or change level. them with a cloth slightly mois- tened with alcohol. heard. ? The disc is ? The ? dirty. speakers and components connected poorly. are The DVD/CD Receiver is located too close to the TV. 28 rating function Rating ? Clean the disc. ? Connect the speakers and components securely. ?M ove your TV away from the audio ponents. com- Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The signal strength weak (when tuning tuning). of the stations is too ?Tune in the station in with automatic No stations have been preset or preset ? Preset the stations manually. Refrnce (page 25). stations have been cleared (when tuning by scanning preset stations). The remote control does not work ? The remote control is not remote properly. ? sensor pointed at the ?Point the remote control at the remote of the DVD/CD Receiver. The remote control is too far from the sensor ? DVD/CD Receiver. ? There is an Use the remote control within about 23 ft obstacle in the path of the of the DVD/CD Receiver. (7 m). ? Remove the obstacle. are ? Replace panel ? Press DIMMER remote control and the DVD/CD Receiver. ? The batteries in the remote control flat. The front panel display is too dim. ? Nothing display. is displayed on the front the batteries with on new ones. the remote control. 29 Specification Power Power Refer to main label Mass Genral External dimensions CD/ VD FM Tuner Refer to main label supply consumption AM [MW] (W x H x D) kg 360 x 56 Suplied Acesori Designs 30 310 Temperature: Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) NTSC 525/60 0.5 % Video 1.0 V mm 5°C to 35°C, Operation status: Horizontal 5% to 85% laser, wavelength 650 nm 140 Hz to 20 kHz More than 75 dB (1 kHz, NOP-3dB, 20 kHz LPF/A-Filter) More than 80 dB output 87.5 Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency (1 kHz, at 12W position) (20 kHz LPF/A-Filter) (p-p), 75 Ω, negative sync., RCA jack 108.0 MHz - or 65.0 - 74.0 MHz, 87.5 108.0 MHz - 10.7 MHz 60 dB 140 522 - - (Mono) 10,000 Hz 1,620 kHz 520 or - 1,720 kHz 450 kHz Stereo mode 30W+30W(6Ωat1kHz,THD10%) Front: 30W + 30W (THD 10 %) (* Depending on the sound mode settings and the source, there may be no sound output.) Centre*: 30W Outputs MONITOR Surround*: 30W 1 Type Impedance Frequency Response (8Ω (6Ω at 30 at 1 Way 1 Speaker kHz, THD Hz, THD Speaker (LHS-25SCS) 160 10 10 H x D) %) %) Passive Subwoofer 1 Way 1 (LHS-25SCW) Speaker 8Ω 20,000 Hz - 84 dB/W Rated x 30W 6Ω Sound Pressure Level Input Power Max. Input Power Net Dimensions (W Net Weight + Subwoofer*: 70W Satellite Speakrs x Operating conditions Operating humidity Surround mode Amplifer 2.5 (1m) 65 - 1,500 Hz 82 dB/W (1m) 30W 70W 60W 140W 92x115x80mm 160x350x280mm 0.5 kg 3.18 kg ?Speakers..........................6?Videocable.........................1 ?AMloopantenna.....................1?FMantenna.........................1 ?Remotecontrol......................1?Batteries(AAA).......................2 and specifications are subject to change without notice.