LG | MBD102 | LG MBD102 Owner’s Manual

MBD102_62_JA2ALLA_ENG
Mini Home Theater
OWNER’S MANUAL
MODEL: MBD102
MBD102
MBS102V
MBD62
MBD62
MBS62V
USB
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of non insulated dangerous
voltage within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect
it from over heating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Should the unit require maintenance, contact an LG authorized
service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug
it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an
authorized LG Service Centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the plug is easily accessible.
The appliance is not intended for use by young
children or infirm persons without supervision.
Young Children should be supervised to ensure
that they do not play with appliance.
If the appliance is supplied from an extension cord
or an electrical portable outlet device, the
extension cord on electrical portable outlet device
must be positioned so that it is not subject to
splashing or ingress of moisture.
Introduction
Maintenance and Service
Before use . . . . . . . . . . . .
Front Panel/Back Panel . .
Remote Control . . . . . . . .
Maintenance and Service
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.3
.4
.5
.6
Installation and Setup
TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .7
Selecting input source . . . . . . . . . . . . . . . . . . .7
Antenna (Aerial) Connection . . . . . . . . . . . . . . .8
PORTABLE Function . . . . . . . . . . . . . . . . . . . . .8
Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . .8
Using Microphone . . . . . . . . . . . . . . . . . . . . . .8
To Adjust ECHO Volume . . . . . . . . . . . . . . . . . .8
USB Function . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Compatible Devices . . . . . . . . . . . . . . . . . . . . . .9
Speaker System Connection . . . . . . . . . . . . . . .9
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . .10
Timer Function . . . . . . . . . . . . . . . . . . . . . . . . .10
Sleep Timer Function . . . . . . . . . . . . . . . . . . . .10
Displaying Disc Information On-screen . . . . .11
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .11
GENERAL OPERATION . . . . . . . . . . . . . . . . . .11
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .11
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
LOCK (Parental Control) . . . . . . . . . . . . . . . .13
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Operation
General features . . . . . . . . . . . . . . . . .
Additional features . . . . . . . . . . . . . . .
Playing an Audio CD or MP3/WMA file
Programmed Playback . . . . . . . . . . . .
Viewing a JPEG file . . . . . . . . . . . . . . .
Playing a DivX Movie file . . . . . . . . . . .
Presetting the Radio Stations . . . . . . .
Listening to the Radio . . . . . . . . . . . . .
RDS Operation - Optional . . . . . . . . . .
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . .
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound Mode . . . . . . . . . . . . . . . . . . . . .
EQUALIZER Effect . . . . . . . . . . . . . . . .
DEMO . . . . . . . . . . . . . . . . . . . . . . . . . .
XDSS . . . . . . . . . . . . . . . . . . . . . . . . . .
MP3 Optimizer . . . . . . . . . . . . . . . . . . .
XTS Pro . . . . . . . . . . . . . . . . . . . . . . . .
VIRTUAL sound . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.15
.16
.17
.17
.18
.19
.20
.20
.21
.22
.22
.22
.22
.22
.22
.22
.22
.22
Refer to the information in this chapter before
contacting a service technician.
Handling the unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as insecticide spray
near the unit.
• Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
REFERENCE
Language Codes . . . . . . . . . . . . . . . . . . . . . . .23
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Troubleshooting . . . . . . . . . . . . . . . . . . . . .24-25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .26
3
Introduction
Before use
Types of Playable Discs
DVD
(8 cm / 12 cm disc)
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future
reference.
This manual provides information on the operation
and maintenance of your unit. Should the unit require
service, contact an authorized service location.
About the
Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Symbol Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
Indicates hazards likely to cause harm to the
unit itself or other material damage.
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
WMA
WMA files
JPEG
JPEG files
DivX
DivX files
Video CD (VCD)
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD±R/RW, SVCD
and CD-R or CD-RW that contains audio titles, MP3,
WMA, JPEG or DivX files.
Note:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs may
not be played on the unit.
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• Do not use irregularly shaped CDs (e.g., heart
shaped or octagonal). It may result in malfunctions.
Regional Code
This unit has a regional code printed on the bottom of
the unit. This unit can play only DVD discs labeled as
the same as the rear of the unit or “ALL”.
Note on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play.
• If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
POWER SAVE MODE
You can set up the unit into an economic power save
mode.
In power-on status, press and hold 1/[ on the front
panel (POWER on the remote control) for about 3
seconds.
- Nothing is displayed in the display window when
the unit enters the power save mode.
To cancel power save mode, press 1/[ on the front
panel (POWER on the remote control).
4
Introduction
Front Panel/ Back Panel
7. MIC1/ MIC2 (MIC Jacks)
1. 1/[ (POWER)
2. Display window
3. • VOLUME
• ./>(SKIP/SCAN)
• TUN. (-/+) (TUNER)
• B/[] (PLAY/PAUSE)
• x (STOP)
• MO./ ST. (MONO/ STEREO)
4. • MIC VOLUME KNOB
• FUNC. (FUNCTION)
(FM, AM, DVD/CD, USB, PORTABLE)
• CLOCK
• TIMER
• SET/ RDS(Optional)
5. PHONES
(Headphone jack :
8. • OPEN/CLOSE
• DEMO
9. DISC TRAY
10.
USB connector
11. Power cord
12. VIDEO OUT connector
13. COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) connector (Y PB PR)
14. Antenna terminal
15. Speaker terminal
3.5mm)
6. PORTABLE IN jack
5
Remote Control
1
20
2
3
4
19
5
18
6
7
8
17
9
10
16
11
12
15
13
14
1. POWER button
2. FUNCTION SELECT buttons
(TUNER/BAND, DVD, AUX, USB)
3. NUMERIC buttons (0-9)
4. EQ master, XDSS plus, XTS Pro, VSM buttons
5. SETUP button
6. • ARROW buttons (v / V / b / B )
(Selects an option in the menu.)
• PRESET (-/+) buttons (v / V )
• TUN. (-/+) buttons (b / B)
7. SELECT/ ENTER button
8. MENU button
(Use the MENU button to display the menu screen
included on DVD video discs.)
9. PROG./MEMO. button
10. REPEAT button
11. REPEAT A-B button
12. • SCAN (FF/GG) buttons
• SLOW (t/T) buttons
• SKIP (./>) buttons
• STOP (x)/MO.ST. button
• PAUSE([])/ STEP button
• PLAY (G) button
13. • DIMMER button
• SLEEP button
• RDS, PTY button - optional
14. ECHO VOL. ( / ), MIC VOL. ( / ) buttons
15. • CLEAR button
• ZOOM button
• MARKER, SEARCH buttons
16. VOLUME -/+ buttons
17. TITLE button
(Use the TITLE button to display the title screen
included on DVD video discs.)
18. DISPLAY button
19. • SOUND MODE button
• AUDIO ( ) button
• SUBTITLE ( ) button
• RETURN ( ) button
20. MUTE ( )button
Remote Control Operation Range
Point the remote control at the remote sensor and press the
buttons.
• Distance: About 23 ft (7 m) from the front of the remote
sensor
• Angle: About 30° in each direction in front of the remote
sensor
Remote control battery installation
Remove the battery cover on the rear of
the remote control, and insert two R03
(size AAA) batteries with
and
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
6
Installation and Setup
TV Connection
Component Video connection
Make one of the following connections, depending on
the capabilities of your existing equipment.
Connect the COMPONENT VIDEO OUT jacks from
the unit to the corresponding jacks on the TV using an
Y PB PR cable (C).
• If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD/CD
Receiver’s progressive scan output for higher video
resolution.
• If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
read owner’s manual for TV then set the resolution
that your TV can accept.
Installation and Setup
Tip:
• Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the unit. Use one of the connections
described below.
• Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution:
• Make sure the unit is connected directly to the TV.
Select an exact AV input on your TV.
• Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy
protection system.
Rear of TV
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Pb
Pr
C
VIDEO
INPUT
L
V
Video connection
Connect the VIDEO OUT jack from the unit to the
VIDEO IN jack on the TV using the video cable (V).
7
Antenna (Aerial) Connection
Headphone Jack
Connect the supplied FM/AM antennas for listening to
the radio.
Connect a stereo headphone plug ( 3.5mm) into the
headphone jack.
Connecting headphones will switch off the speakers
Using Microphone
FM wire
antenna
(supplied)
You can sing with a music source by connecting a
microphone to the unit.
1. Connect your microphone to the MIC1/ MIC 2
Jacks.
“MIC IN” and “ ” will be shown in the display
window.
For AM(MW)
reception,connect
the loop antenna
(aerial) to the
terminal marked AM
AM(MW) loop
antenna
(aerial) (supplied)
Note:
• To prevent noise pickup, keep the AM loop antenna
away from the unit and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
PORTABLE Function
When you connect a portable music playing device to
the PORABLE IN jack on this device by using a 3.5mm
mini stereo cable (not supplied), you can hear the sound
being outputted from the portable device through the
speaker.
3. Sing along with the accompaniment.
Adjust the microphone volume by pressing MIC
VOL. button (or turning MIC VOLUME KNOB).
(MIN,1 - 14, MAX steps)
Note:
• When not using the microphone, set the MIC VOL. to
minimum or turn off the MICs and remove the
microphone from the MIC Jacks.
• If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using MIC VOL..
• If sound through the microphone is extremely loud, it
may be distorted. In this case, decrease MIC volume.
To Adjust ECHO Volume
You can give an echo effect to the sound from the
microphones.
Press ECHO VOL. ( / ) on the remote control to
increase the echo volume or decrease it.
(MIN,1 - 14, MAX steps)
Portable Device
PORTABLE IN
Head phone or Line out
1. Connect the PORTABLE IN jack on this device to a
headphone jack or line out on another portable one
by using a cable.
2. Press AUX repeatedly to select PORTABLE function.
3. Start playing the connected portable device.
4. Adjust the volume by using VOLUME.
Note:
The “ 3.5mm mini stereo” is sold separately.
8
2. Play a music you want.
USB Function
Speaker System Connection
You can enjoy the media files such as pictures (JPG),
movies (Video file) and tunes (MP3/WMA file) saved
in an MP3 player or USB memory by connecting
storage devices to the USB port of this unit.
Connect the speaker cable to the speaker terminal.
Note:
• Be sure to match the speaker cable to the
appropriate terminal on the components: + to + and
– to –. If the cords are reversed, the sound will be
distorted and will lack base.
• Connect the Left/ Right speaker correctly. If it
reversed, the sound may be distorted.
RED
1. Devices which require additional program
installation when you have connected it to a
computer, are not supported.
2. MP3 Player : Flash type MP3 player.
• The MP3 player requiring installation of a driver
is not supported.
3. USB Flash Drive : Devices that support USB2.0 or
USB1.1.
Installation and Setup
Compatible Devices
BLACK
Front
speaker (R)
Front
speaker (L)
Basic Playback
1. Connect the USB device to the USB port of your
unit.
2. Press USB to select USB function.
3. Press PLAY
Note:
Besides Basic Playback, If you want to operate other
functions, see the CD Playback section. Refer to the
page 15, 16, and 17.
To Remove the USB from the unit
1. Choose the other functions except USB
function in order to remove the USB.
2. Remove the USB from the unit.
Note:
• Do not extract the USB device in operating.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub, the
USB device might not be recognized.
• A device using NTFS file system is not supported.
(Only FAT (16/32) file system is supported.)
• The USB function of this unit does not support all
USB devices.
• Digital camera and mobile phone are not supported.
• This unit is not supported when the total number of
files is 1000 or more.
• If the drive of USB device is two or more, a drive
folder is displayed on the screen. If you want to
move to the previous menu after you select a folder,
press RETURN.
9
Setting the Clock
1. Press CLOCK.
2. Select a 24 hour time system or a 12 hour time
system by pressing ./>.
(12HR)
or
(24HR)
3. Press SET to confirm the selected hour time
system.
4. Press ./> on the front panel to set the
correct hours.
5. Press SET.
6. Press ./> on the front panel to set the
correct minutes.
7. Press SET and the correct time is shown on the
display window.
8. Press CLOCK at any time to display the time for
about 5 seconds.
Note:
If you want to reset the clock, press and hold CLOCK
for more than 2 seconds.
Timer Function
With the TIMER function, you can have the radio
reception, CD play and USB play turned on and off at
the desired time.
1. Press CLOCK to check the current time.
(If you don’t set clock, the timer function doesn’t
work.)
2. Press TIMER to enter the timer setting mode. If
you want to correct the previous memorized
TIMER setting, press and hold the TIMER for
more than 2 seconds.
- The previously memorized timer on the time and
“ ” indicator appears in the display window.
3. Each function (TUNER → DVD/CD → USB)
flashes in the display window in turn. Press SET
when the desired function is flashing.
4. a. When you select the TUNER function, select
the previously memorized preset number by
pressing ./ > on the front panel and
press SET.
- “ON TIME” indicator appears for about
0.5 seconds in the display window and
then disappears.
b. When you select the DVD/CD or USB function,
- “ON TIME” indicator appears for about 0.5
seconds in the display window and then
disappears.
5. Set the hour to switch on by pressing ./>
on the front panel.
6. Press SET.
7. Set the minute to switch on by pressing ./>
on the front panel.
10
8. Press SET.
- “OFF TIME” indicator appears for about 0.5
seconds in the display window and then
disappears.
9. Set the hour to switch off by pressing ./>
on the front panel.
10. Press SET.
11. Set the minute to switch off by pressing ./>
on the front panel.
12. Press SET.
13. Adjust the volume level by pressing ./> on
the front panel.
14. Press SET.
“ ” appears in the display window and the timer
setting has been completed.
15. Switch the system off.
The selected function is automatically switched on
and off at the time set.
To cancel or check the timer
Each time the TIMER is pressed you can select the
timer set or cancel. You can also check the timer
setting status.
To activate or check the timer, press the TIMER that
“ ” appears in the display window.
To cancel the TIMER, press the TIMER that “ ”
disappears in the display window.
Note:
• If you insert the DVD,VCD or DivX except audio
CD/MP3/WMA on the unit, the timer function will be
operated to the TUNER.
• This is not supported in the multi card reader.
Sleep Timer Function
When the sleep timer is used, the power is
automatically turned off after the specified time has
elapsed.
1. Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time appears in
the display window.
2. Each time you press SLEEP the setting changes
in the following order.
SLEEP 180 (minutes) → 150 (minutes) → 120
(minutes) → 90 (minutes) → 80 (minutes) →
70 (minutes) → 60 (minutes) → 50 (minutes) →
40 (minutes) → 30 (minutes) → 20 (minutes) →
10 (minutes) → OFF (No display)
Note:
If you press SLEEP while the sleep time is
displayed, the SLEEP time is reset.
To cancel the sleep timer mode
If you have to stop the function, press the SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
Displaying Disc Information
On - screen
GENERAL OPERATION
You can display various information about the disc
loaded on-screen.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
Title (Track) – Current title (or track) number/
total number of titles (or tracks).
Chapter – Current chapter number/total number
of chapters.
Time – Elapsed playing time.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/ total number of angles.
Sound – Selected sound mode.
3. Use v / V to select the second desired option and
then press B to move to the third level.
4. Use v / V to select the desired setting then press
SELECT/ENTER to confirm your selection. Some
items require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
LANGUAGE
Installation and Setup
1. Press DISPLAY to show various playback
information.
The displayed items differ depending on the disc
type or playing status.
1. Press SETUP. The Setup menu appears.
Note:
If any button is not pressed for a few seconds, the onscreen display disappears.
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see the pages 11 to 14.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level: Press B.
To go back to the previous level: Press b.
OSD
Select a language for the Setup menu and the onscreen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original – Refers to the original language in which
the disc was recorded.
Other – To select another language, press
numeric buttons and then
SELECT/ENTER to enter the
corresponding 4-digit number according to
the language code list on the page 23. If
you enter the wrong language code, press
CLEAR.
11
DISPLAY
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the unit to a standard (analog)
television, set Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
On.
To Turn ON progressive scan:
TV Aspect
4:3 – Select when a standard 4:3 TV is connected.
16:9 – Select when a 16:9 wide TV is connected.
Display Mode
The display Mode setting works only when the TV
Aspect mode is set to “4:3”.
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the
screen.
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the
portions that do not fit.
12
Connect component out of the unit to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select “Progressive Scan” on the DISPLAY menu
then press B.
2. Select “On” using v / V.
3. Pressing SELECT/ENTER will set the player to
Progressive scan mode.
Caution:
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit. First,
remove the disc in the unit. Next, press STOP( x )
and hold it for five seconds before releasing it. The
video output will be restored to the standard setting,
and a picture will once again be visible on a
conventional analog TV or monitor.
AUDIO
3. Select a rating from 1 to 8 using v / V.
Each DVD disc has a variety of audio output options.
Set the unit’s AUDIO options according to the type of
audio system you use.
Rating 1-8: Rating one (1) has the most
restrictions and rating eight (8) is the
least restrictive.
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press SELECT/ENTER to confirm your rating
selection, then press SETUP to exit the menu.
Password
You can enter or change password.
1. Select “Password” on the LOCK menu and then
press B.
With the DVD*1 format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). Then, you may
listen to a movie at a lower volume without losing
clarity of sound. Set DRC to On for this effect.
*1: Dolby Digital only
Vocal
2. Follow the step 2 as shown above (Rating).
To change the password, press SELECT/ENTER
when the “Change” option is highlighted. Input a
password and press SELECT/ENTER. Enter it
again and press SELECT/ENTER to verify.
Installation and Setup
Dynamic Range Control (DRC)
3. Press SETUP to exit the menu.
If you forget your password
If you forget your password, you can clear it using the
following steps:
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
1. Press SETUP to display the Setup menu.
LOCK (Parental Control)
Area Code
2. Input the 6-digit number “210499” and press
SELECT/ENTER. The password is cleared.
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 23.
US
1. Select “Area Code” on the LOCK menu then
press B.
2. Follow the step 2 as shown previous paragraph
(Rating).
Rating
3. Select the first character using v / V.
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
4. Press B and select the second character using
v / V.
1. Select “Rating” on the LOCK menu then
press B.
5. Press SELECT/ENTER to confirm your Area code
selection.
2. To access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
Input a password and press SELECT/ENTER.
Enter it again and press SELECT/ENTER to verify.
If you make a mistake before pressing
SELECT/ENTER, press CLEAR.
13
OTHERS
Semi Karaoke
When a chapter/ title / track is fully finished ,this
function shows the score in the screen with a fanfare
sound.
On : Turn the “Semi Karaoke”function on.
When you finished singing a score will
appear on the screen.
Off : Turn the “Semi Karaoke” function off.
Fanfare and score do not appears on the
screen
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Off: Video CDs with PBC are played in the same
way as Audio CDs.
DivX(R) Registration
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos based on the DivX® VOD service. For more
information, visit www.divx.com/vod.
1. Select “DivX(R) Registration” option and then
press B.
2. Press SELECT/ENTER while “Select” is selected
and the registration code will appear.
Use the registration code to purchase or rent the
videos from DivX® VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on
this unit.
3. Press SELECT/ENTER to exit.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
14
Available discs for the Semi Karaoke function:
• DVD discs
• DVD Karaoke Discs
• VCD discs with more than 2 tracks
Note:
• This function operate on the DVD/CD mode.
• The Semi Karaoke function is available only when a
microphone is connected.
• Watching movies, “off” the Semi Karaoke at the
SETUP menu or enjoy it without connecting the
MIC if the fanfare or score appears during changing
a chapter.
Operation
General features
Discs
Buttons
Operations
OPEN / CLOSE
Opens or closes the disc tray.
X (PAUSE)
During playback, press X to pause playback.
ALL
Press X repeatedly to play Frame-by-Frame.
DVD
During playback, press SKIP (. or >) to go to the
next chapter/track or to return to the beginning of the
current chapter/track.
ALL
SKIP (. / >)
ALL
VCD
DivX
Press SKIP . twice briefly to step back to the previous
chapter/track.
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
DVD : bb, bbb, bbbb, bbbbb, bbbbbb or
BB, BBB, BBBB, BBBBB, BBBBBB
DivX disc, Video CD : bb, bbb, bbbb, bbbbb or
BB, BBB, BBBB, BBBBB
WMA/MP3, Audio CD : m(X2, X4, X8) or M(X2, X4, X8)
DVD
MP3
DivX
ACD
VCD
WMA
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
DVD
MP3
DivX
ACD
VCD
WMA
REPEAT A-B
During playback, press REPEAT A-B to select a point A
and a point B and repeats a sequence from point A
(Starting point) to point B (End point).
Press REPEAT A-B to exit.
DVD
VCD
ZOOM
During playback or in the pause mode, press ZOOM to
the video image (3 steps).
You can move through the zoomed picture using b B v
V.
DVD
VCD
TITLE
If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may
appears.
DVD
MENU
The disc menu appears on the screen.
DVD
During playback, press SUBTITLE repeatedly to select a
desired subtitle language.
DVD
DivX
(AUDIO language) During playback, press AUDIO repeatedly to hear a
different audio language or audio track.
DVD
DivX
(AUDIO channel)
Press AUDIO repeatedly during playback to hear a
different audio channel (STEREO., LEFT or RIGHT).
VCD
Press SLOW (t or T) to select required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Video CD : T (1/2, 1/4, 1/8, 1/16)
DVD
REPEAT
(SUBTITLE)
SLOW
Operation
SCAN (m / M)
VCD
Notes on general features:
• Zoom may not work on some DVDs.
• The A-B repeat function is available only in the current title.
• If you want to operate REPEAT on VCD, you can use it after PBC is set to “off” on the SETUP MENU.
15
Additional features
Time Search
DVD
VCD
Last Scene Memory
DivX
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds. If you enter the wrong numbers, press
CLEAR to remove the numbers you entered. Then
input the correct numbers.
4. Press SELECT/ENTER to confirm. Playback starts
from the selected time.
Marker Search
DVD
VCD
DivX
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press SELECT/ENTER and playback starts from
the marked scene. Or press CLEAR and the
marker number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
Screen Saver
The screen saver appears when you leave the unit in
Stop mode for about five minutes.
16
DVD
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in the memory
even if you remove the disc from the unit or switch off
the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Note:
This unit does not memorize the scene of a disc if you switch
off the unit before commencing to play the disc.
1.5 speed playback
DVD
VCD
MP3
WMA
ACD
You can quickly enjoy a music and movie.
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed on the disc.
1. Press PLAY during the normal playback. The
screen will appear at 1.5 speed with sound .
2. To return to the normal PLAY, press PLAY.
System Select
You must select an appropriate system mode for your
TV system. If NO DISC appears in the display
window, press and hold PAUSE/STEP for more than 5
seconds to select a system (PAL, NTSC or AUTO).
When the selected system is not compatible with
the system of your TV, normal colour picture may
not be displayed.
NTSC: Select when unit is connected with NTSC-TV.
PAL:
Select when unit is connected with PAL-TV.
AUTO: Select when unit is connected with Multi
system TV.
This unit can play Audio CDs or MP3/WMA files.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recording media
Audio CD, a menu appears on the TV screen.
Press v / V to select a track/file and then press PLAY
or SELECT/ENTER, and playback starts. You can use
variable playback functions. Refer to the page 15, 16.
ID3 TAG
When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY repeatedly. The information [ Folder and file
name, Song, Artist, Album, Genre, Comment, Time
information ] of the MP3/WMA file will be shown in the
display window or TV screen.
To move to next or previous files, press the SKIP
(. / >) button.
Tip:
• Press MENU to move to the next page.
• On a CD with MP3/WMA and JPEG, you can switch
MP3/WMA and JPEG. Press TITLE, and MUSIC or
PHOTO word on top of the menu is highlighted.
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• The unit cannot read an MP3/WMA file that has a file
extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files.We recommend
that you use Easy-CD Creator, which creates an ISO
9660 file system.
• File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ? * : “
< > l etc.
• The total number of files on the disc should be less than
999.
This unit requires discs and recordings to meet certain
technical standards in order to achieve optimal playback
quality. Pre-recorded DVDs are automatically set to these
standards. There are many different types of recordable
disc formats (including CD-R containing MP3 or WMA files)
and these require certain pre-existing conditions (see
above) to ensure compatible playback.
Customers should note that permission is required in
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the copyright owner.
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the unit memory. A
program can contain 300 tracks.
1. Insert a disc.
Audio CD and MP3/WMA discs:
2. Select a track on the “List”, and then press
PROG.MEMO. or select “
(Add)” icon and then
press SELECT/ENTER to place the selected track
on the “Program” list. Repeat to place additional
tracks on the list.
Note:
You can add all tracks in the disc. Select “
then press SELECT/ENTER.
(Add All)” icon
3. Select the track you want to start playing on the
“Program” list. Press MENU to move to the next
page.
4. Press PLAY or SELECT/ENTER to start. Playback
begins in the order in which you programmed the
tracks. Playback stops after all of the tracks on the
“Program” list have played once.
5. To resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track
• ALL: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
Operation
Playing an Audio CD or MP3/WMA
file
Erasing a Track from “Program” List
1. Use v V to select the track that you wish to erase
from the Program list.
2. Press CLEAR. Alternatively, select “
(Delete)”
icon then press SELECT/ENTER to place the
selected track on the Program list. Repeat to
erase additional tracks on the list.
Erasing the Complete Program List
Use v / V to select “
SELECT/ENTER.
(Del all)” and then press
Note:
The programs are also cleared when the disc is removed.
17
Zoom
Viewing a JPEG file
This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on the right.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
Press the ZOOM repeatedly.
Zoom on y Zoom off
Press v, B or M to enlarge the photo(video) image.
Press V, b or m to reduce the photo(video) image.
PHOTO
List
Preview
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG file compatibility with this player is limited
as follows:
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
2. Press v / V to select a folder, and then press
SELECT/ENTER. A list of files in the folder
appears.
If you are in a file list and want to return to the
previous Folder list, use v / V to highlight
and
press SELECT/ENTER or PLAY.
3. If you want to view a particular file, press v / V to
highlight a file and press SELECT/ENTER or
PLAY. While viewing a file, you can press STOP
to move to the previous menu (JPEG menu).
Slide Show
Use v V b B to highlight the
(Slide Show) then
press SELECT/ENTER or PLAY.
Tip:
• There are four Slide Speed options
:
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use v /V /b /B to highlight the Speed. Then, use b / B to
select the option you want to use and then press
SELECT/ENTER.
• If you set Speed option to Off, the slide show is not active.
Still Picture
1. Press PAUSE/STEP during the slide show.
The unit will now enter the PAUSE mode.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
Moving to another File
Press SKIP (. or >) once during viewing a
picture to advance to the next or previous file.
Rotating the picture
Press v /V /b /B during showing a picture to rotate
the picture clockwise or counter-clockwise.
18
• Depending upon the size and the number of
JPEG files, it could take a long time for the unit to
read the disc’s contents. If you don’t see an onscreen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
2048 pixels and burn another disc.
• The total number of files and folders on the disc
should be less than 999.
• Some discs may not operate due to a different
recording format or the condition of disc.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this unit. Even though the files
are shown as JPEG image files in Windows
Explorer.
Playing a DivX Movie file
Using this unit you can play DivX file.
1. Insert a disc and close the tray. The MOVIE menu
appears on the TV screen.
0:00:00
1/5
DivX file compatibility with this player is limited
as follows:
• Available resolution size of the DivX file is under
800x600 (W x H) pixel.
• The file name of the DivX subtitle is available by
45 characters.
MOVIE
List
Movie Folder 1
Movie Folder 2
Movie Folder 3
Movie Folder 4
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the
display.
Movie Folder 5
Movie Folder 7
Movie Folder 8
2. Press v / V to select a folder and then press
SELECT/ENTER. A list of files in the folder
appears. If you are in a file list and want to return
to the Folder list, use v / V to highlight
and
press SELECT/ENTER or PLAY.
3. If you want to view a particular file, press
v / V to highlight a file and press SELECT/ENTER
or PLAY.
4. Press STOP to exit.
Tip:
• Press MENU to move to the next page.
• On a CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
is highlighted.
Note:
• Be sure to select “SUBTITLE ON” mode by pressing the
subtitle file every time before playing a DivX file .
• When the subtitle has more than two languages in the file,
original subtitle is only available.
• You can not adjust sound mode and VIRTUAL sound
during the DivX file playing.
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
• If the video and audio structure of recorded
files is not interleaved, either video or audio is
outputted.
Playable DivX file
• ".avi ", ".mpg ", ".mpeg ", ".divx"
Playable Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
Playable Codec format
• "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "MP43 ",
"3IVX ".
Playable Audio format
• "AC3 ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3),
40 - 192kbps (WMA)
Operation
Movie Folder 6
• The DivX subtitle file name has to be identified with the
DivX file name to display by this unit.
Notice for displaying the Divx subtitle
If the subtitle does not display properly during playback,
press and hold SUBTITLE for about 3 seconds then
press SUBTITLE to select another language code until
the subtitle is displayed properly
19
Presetting the Radio Stations
Listening to the Radio
You can preset 50 stations for FM and AM. Before
tuning, make sure that you have turned down the
volume to the minimum.
1. Press TUNER/BAND to select the frequency (AM or
FM) you want.
1. Press TUNER/BAND to select the frequency (AM or
FM) you want.
The last received station is tuned in.
2. Select a station you want by pressing
TUN. (-/+).
Tuning in automatically
- Press TUN. (-/+) for more than 0.5 second.
Scanning stops when the unit tunes in a stations.
Tuning in manually
Press TUN. (-/+) briefly and repeatedly.
3. Press PROG./MEMO..
A preset number will flash in the display window.
4. Press PRESET (v/V) to select the preset number
you want.
5. Press PROG./ MEMO. again.
The station is stored.
6. Repeat the steps 1 (or 2) to 5 to store other
stations.
To delete all the memorized stations
Press and hold PROG./ MEMO. for about two
seconds, “ERASE ALL” appears in the display window
and then PROG./ MEMO. again, the stations are
deleted.
For your reference
If all stations have already been entered, “FULL”
message will appear in the display window for a
moment and then a preset number will flash. To
change the preset number, follow the steps 4-5.
To recall presets
Press and hold PRESET (v/V) until the desired preset
number appears or press it repeatedly.
20
2. Press PRESET (v/V) repeatedly to select the
preset station you want.
- Each time you press the button, the unit tunes in
one preset station at a time.
3. Adjust the volume by pressing VOLUME (-/+)
repeatedly.
To listen to non-preset radio stations
• For manual tuning, see “Tuning in manually” in the
step 2 on left.
• For automatic tuning, see “Tuning in automatically”
in the step 2 on left.
To turn off the radio
Press POWER to turn the unit off or select another
function mode (DVD/CD, USB, AUX).
For your reference
• If an FM program is noisy;
Press MO./ ST. that “STEREO” appears in the
display window. There will be no stereo effect, but
the reception will be improved.
Press MO./ ST. again to restore the stereo effect.
• To improve reception;
Reposition the supplied antennas.
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
Now in use in many countries, RDS is a system for
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS TUNING
When a FM station is tuned in and it contains RDS
data, the unit will automatically display the station’s
call sign and the RDS indicator will light in the Display
Window as well as indicators for the RDS services
programme (PS), programme type recognition (PTY),
Radiotext (RT) and Clock Time (CT) if transmitted by
the station.
RDS DISPLAY OPTIONS
The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign
that appears when a station is first tuned. In normal
RDS operation the display will indicate the station
name, broadcast network or call letters. Pressing RDS
enables you to cycle through the various data types in
the sequence:
(PS → FREQUENCY → PTY → RT → CT)
• PS (Programme Service name)- The name of the
channel is shown in the Display Window.
• PTY (Programme type recognition)- The name of
the programme type is shown in the Display
Window.
• RT (Radiotext)- A “text” message contains special
information from the broadcast station. Note that
this message may scroll across the display to permit
message.
• CT (Time controlled by the channel)- Enables the
unit to receive the actual time and show it in the
Display Window.
Note:
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not being transmitted, the
Display Window will show a PTY NONE, RT NONE,
CT NONE, PS NONE message.
Programme Search (PTY)
A major benefit of RDS is its ability to encode
broadcasts with Programme Type (PTY) codes that
indicate the type of material being broadcast. The
following list shows the abbreviations used to indicate
each PTY along with an explanation of the PTY.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TEST
ALARM !
News
Current Affairs
Information
Sports
Educational
Drama
Culture
Science
Varied Speech Programme
Popular Music
Rock Music
Easy Listening Music
Light Music
Classical Music
Other Music
Weather Information
Financial Programmes
Children’s Programmes
Social Affairs Programmes
Religious Broadcasts
Phone-In Programmes
Travel and Touring
Leisure and Hobby
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary Programmes
Station Alarm Test Message
Emergency Broadcast Information
Operation
RDS Operation - Optional
You may search for a specific Programme Type (PTY)
by following these steps:
1. Press TUNER/BAND to select FM mode.
2. Press PTY, the display will show the last PTY in
use.
3. Press PTY repeatedly to select a desired PTY.
4. When the PTY is selected, press TUN.(-/+).The unit
will go into an automatic search mode. When a station is
tuned, the search will stop.
21
Dimmer
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.
Press XDSS plus to reinforce treble, bass and the
surround effect.
The “XDSS ON” or “NORMAL” indicator lights.
Mute
Press MUTE to mute your unit.
MP3 Optimizer
You can mute your unit in order, for example, to
answer the telephone.
Sound Mode
You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the program you want to listen to (2 ch. sound only).
Press SOUND MODE repeatedly.
BYPASS → ON STAGE → STUDIO → CLUB → HALL
→ THEATER 1 → CHURCH → BYPASS...
Note:
Initial sound mode is BYPASS.
EQUALIZER Effect
You can choose 7 fixed sound impressions and adjust
the BASS, MIDDLE and TREBLE.
- You can select a desired sound impressions by
using EQ master.
→
NORMAL → USER EQ → POP
This function is optimized for compressible MP3 files
so that it improves the bass sound. Each time you
press XDSS plus the setting changes in the following
order.
XDSS ON t MP3 -- OPT ON t NORMAL
XTS Pro
The function creates the optimum sound for you to
play of the original sound. Each time you press XTS
Pro, “XTS -- P ON” or “NORMAL” is displayed in turn.
Note:
The XTS Pro function will not be operated when a
headphone has been connected.
VIRTUAL sound
Press VSM to set the VIRTUAL sound.
CLASSIC
Source
2.1 ch.
5.1 ch
→
→
→
→
JAZZ
DRAMA
ROCK
- Press EQ master to select USER EQ.
1. To enter the “USER EQ” setting mode, press SET
while “USER EQ” is displayed.
2. In USER EQ mode, press B[] or x on the front
panel repeatedly. Then you can select the sound
effect you want among BASS, MIDDLE or TREBLE.
3. When a menu you select is displayed, press
. / > on the front panel to set the sound level
MIN, -4 ~ +4, MAX steps.
- Then the sound level is displayed for a moment
and the setting completed.
4. Repeat the steps from 2 to 3 to set other sound
effect.
5. Press SET.
DEMO
Press DEMO on the front panel in power off state to
demonstrate the function in the display window. To
cancel it, press POWER or DEMO again.
22
XDSS
(Extreme Dynamic Sound
System)
Display
VIRTUAL
VIRTUAL
Effect
3D STEREO
VIRTUAL sound
3D STEREO
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
VIRTUAL sound
A pending down mix technology converts 5.1
channel to 2 channel sound having directional
information of audio. And it makes a 2 channel or
2.1 channel feel 5.1 channel sound.
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Area
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
RU
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
FI
FR
DE
GB
GR
GL
Heard and McDonald Islands HM
Hong Kong
HK
Hungary
HU
India
IN
Indonesia
ID
Israel
IL
Italy
IT
Jamaica
JM
Japan
JP
Kenya
KE
Kuwait
KW
Libya
LY
Luxembourg
LU
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
REFERENCE
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
23
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Correction
No power.
• The power cord is disconnected.
• Plug the power cord securely into the
wall outlet.
The power is on, but
the unit does not work.
• No disc is inserted.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display
is lit.)
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input
mode on the TV so the picture from
the unit appears on the TV screen.
• The video cable is not connected
securely.
• The connected TV power is turned off.
• Connect the video cable into the
jacks securely.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
unit so you can hear the sound from
the unit.
• The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected
with the audio cable.
The playback picture is
poor.
• The disc is dirty.
• Clean the disc.
The unit does not start
playback.
• No disc is inserted.
• Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display
is lit.)
• An unplayable disc is inserted.
• Insert a playable disc. (Check the
disc type, colour system and Regional
code.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
• The disc is not placed within the guide.
• Place the disc on the disc tray
correctly inside the guide.
• The disc is dirty.
• Clean the disc.
• A menu is on the TV screen.
• Press the SETUP button to turn off
the menu screen.
• The Rating level is set.
• Cancel the Rating function or change
the rating level.
• The disc is dirty.
• Clean the disc.
• The speakers and components are
connected poorly.
• Connect the speakers and
components securely.
• The unit is located too close to the TV.
• Move your TV away from the audio
components.
There is no sound or
only a very low-level
sound is heard.
Loud hum or noise is
heard.
24
Cause
• Turn on the TV.
Correction
• Connect the antenna securely.
• Adjust the antennas and connect an
external antenna if necessary.
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning).
• Tune in the station manually.
• No stations have been preset or preset
stations have been cleared (when
tuning by scanning preset stations).
• Preset the stations (page 20).
• The remote control is not pointed at the
remote sensor of the unit.
• Point the remote control at the remote
sensor of the unit.
• The remote control is too far from the
unit.
• Use the remote control within about 23
ft (7 m).
• There is an obstacle in the path of the
remote control and the unit.
• Remove the obstacle.
• The batteries in the remote control are
not enough.
• Replace the batteries with new ones.
The front panel
display is too dim.
• The Dimmer function is operated
• Press DIMMER.
Nothing is display on
the front panel
display.
• The unit enters the power save mode
• To cancel power save mode.
The remote control
does not work
properly.
REFERENCE
Cause
Symptom
Radio stations cannot • The antenna is positioned or connected
poorly.
be tuned in.
25
Specifications
General
Power supply
Power consumption
Net Weight
External dimensions (WxHxD)
Refer to the back panel of the unit.
Refer to the back panel of the unit.
3.08kg (MBD102 Model)
3.00kg (MBD62 Model)
300 x 130 x 243 mm
CD/DVD
Laser
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Semiconductor laser, wavelength 650 nm
PAL 625/50, NTSC 525/60
40 Hz to 20 kHz
More than 75 dB (1 kHz, NOP -3 dB, 20 kHz LPF/A-Filter)
More than 75 dB
0.5 % (1 kHz, at 1W position) (20 kHz LPF)
Video
Video output
COMPONENT VIDEO OUT
Tuner
FM Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
AM Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Amplifier
Output Power
1.0 V (p-p), 75 Ω, negative sync./ RCA jack x 1
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(PB)/(PR) 0.7 V (p-p), 75 ohms, RCA jack x 1
87.5 - 108.0MHz or 65 - 74MHz, 87.5 - 108.0MHz
10.7MHz
60/55dB
50 - 10000Hz
522 - 1620kHz or 520 - 1720kHz
450kHz
30dB
80 - 1800Hz
T.H.D
Frequency Response
Signal-to-noise ratio
50W + 50W (MBD102 Model)
30W + 30W (MBD62 Model)
0.5%
40 - 20000Hz
75dB
Speakers
Speaker Name
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (WxHxD)
Net Weight (1EA)
MBS102V
Bass Reflex 2Way 2 Speaker
4Ω
60 - 20000Hz
82dB/W (1m)
50W
100W
160 x 308 x 233mm
2.8kg
MBS62V
Bass Reflex 2Way 2Speaker
4Ω
60 - 20000Hz
82dB/W (1m)
30W
60W
160 x 308 x 204 mm
2.5kg
Designs and specifications are subject to change without notice.
P/NO : MFL38043310
Download PDF

advertising