LG | HECTO-Laser-Display | LG HECTO Laser Display Owner’s Manual

OWNER'S MANUAL
Laser Display
Please read the safety information carefully before using the product.
HECTO
www.lg.com
2
LICENSE
LICENSE
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
ABOUT DIVX VIDEO: DivX® is a digital video format created
by DivX, LLC, a subsidiary of Rovi Corporation. This is an
official DivX Certified® device that plays DivX video. Visit divx.
com for more information and software tools to convert your
files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play purchased
DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how
to complete your registration.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks
of Rovi Corporation or its subsidiaries and are used under
license.Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,487,535 & other U.S. and worldwide patents
issued & pending. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
This device meets the EMC requirements for home appliances (Class B) and is
intended for home usage. This device can be used in all regions.
NOTE
• The product images and On-Screen Display (OSD) in this manual are examples to
help you understand how to operate the product, so they may be different from the
actual Laser Display.
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Please take note of the safety instructions to prevent any potential accident or misuse
of the Laser Display.
Safety precautions are given in two forms, i.e. Warning and Caution as detailed below.
WARNING: Failure to follow the instructions may cause serious injury and even
death.
CAUTION: Failure to follow the instructions may cause injury to persons or
damage to the product.
Read the owner's manual carefully and keep it to hand.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with
WARNING/CAUTION
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RNING/CAUTION
OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE
AND ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
3
4
SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Indoor Installation
WARNING
• Do not place the product in direct
sunlight or near heat sources such as
radiators, fires, stoves, etc.
-- This may cause fire.
• Do not place inflammables such as
flammable spray near the product.
-- This may cause fire.
• Do not allow children to cling to or
climb up to the product.
-- This may cause the product to fall,
causing injury or death.
• Do not place the product directly on a
carpet, rug or place where ventilation
is restricted such as a book shelf or
closet.
-- This may cause the product's
internal temperature to rise and
cause fire.
• Do not place the product close to
sources of steam or oil such as a
humidifier or kitchen counter.
-- This may cause fire or electric
shock.
• Do not place the product where it
might be exposed to dust.
-- This may cause fire.
• Do not use the product in a damp
place, such as a bathroom or a place
exposed to the wind and rain, where
it is likely to get wet.
-- This may cause fire or electric
shock.
• Do not allow a tablecloth or curtain to
block the vents.
-- This may cause the internal
temperature of the product to rise
and cause fire.
• The distance between the air vent
of the product and the wall should
be more than 30 cm for ventilation
purposes.
-- Otherwise, this may cause the
internal temperature of the product
to rise and cause fire.
• When installing the product on a
ceiling, a professional technician
should install it using the authorized
tools. If installed improperly, the
product may fall.
-- This may cause personal injury or
property damage. For installation
of the product, please contact the
customer support center.
• If you use a ceiling mounting device,
use adhesive to prevent loosening of
screws, or apply oil or lubricant to the
product, this may cause the case to
crack and the product to fall.
• This may also cause serious personal
injury to the person below the device
(if any) and damage to the product
as well.
SAFETY INSTRUCTIONS
CAUTION
• When installing the product on a table
or shelf, be careful not to place it near
the edge.
-- This may fall causing injury to
persons or the product malfunction.
Make sure that you use the cabinet
or stand that fits the product.
• Turn off the product, disconnect
it from the power supply and all
connected apparatus before moving
it.
-- Otherwise, the power cord may be
damaged causing fire or electric
shock.
• Do not place the product on an
unstable or vibrating surface such as
a wobbly shelf or a slope.
-- It may fall or flip and cause injury.
• Be careful not to tip or drop the
product over when connecting
external devices to the product.
-- This may cause injury to persons or
damage to the product.
5
Power
WARNING
• The grounding wire should be
connected.
-- Be sure to connect the grounding
wire to avoid damage to the product
or an electric shock when there is a
short circuit.
• If it is not possible to ground the
unit, purchase a circuit breaker and
connect the product to its wall outlet.
• Do not try to ground the product to
the gas pipe, water pipe, lightning
rod, or telephone line, etc.
• The power plug should be inserted
fully into the power outlet.
-- An unstable connection may cause
fire.
• Do not place heavy objects on the
power cord.
-- This may cause fire or electric
shock.
• Never touch the power plug with a
wet hand.
-- This may cause electric shock.
• Do not plug too many devices into
one multi-power outlet.
-- This may cause fire due to the
power outlet overheating.
• Remove dust or contaminants around
power plug pins or wall outlets.
-- Failure to do so may cause fire.
• To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
6
SAFETY INSTRUCTIONS
CAUTION
• Hold the plug firmly when unplugging.
-- A broken wire in the cord may
cause fire.
• Ensure the power cord and plug are
not damaged, modified, severely
bent, twisted, pulled, sandwiched
or hot. Do not use the product if the
power outlet is loose.
-- This may cause fire or electric
shock.
• Keep the power cord away from any
heating devices.
-- The cord coating may melt and
cause fire or electric shock.
• Place the product where people will
not trip over or tread on the power
cord to protect the power cord and
plug from any damage.
-- This may cause fire or electric
shock.
• Do not turn the product on or off
by plugging in the power plug or
unplugging it from the wall outlet.
(Do not use the power plug as a
switch.)
-- This may cause electric shock or
product malfunction.
• Do not insert a conductor into the
other side of the wall outlet while the
power plug is inserted into the wall
outlet.
• In addition, do not touch the
power plug immediately after it is
disconnected from the wall outlet.
-- This may cause electric shock.
• Only use the official power cord
provided by LG Electronics. Do not
use other power cords.
-- This may cause fire or electric
shock.
When in Use
WARNING
• Do not place anything containing
liquid on top of the product, such as
a vase, flower pot, cup, cosmetics, or
medicine; or ornaments, candles, etc.
-- This may cause fire or electric
shock, or injury due to falling.
• In the event that there is a heavy
impact on the product or the cabinet
is damaged, switch it off, unplug it
from the power outlet and contact an
authorized service center.
-- Failure to do so may cause fire or
electric shock.
• Do not insert pieces of metal, such
as coins, hairpins or metal debris, or
flammable materials, such as paper
or matches, into the product.
-- This may cause fire or electric
shock.
• In the event that liquid or a foreign
object falls into the product, switch it
off and unplug it from the power outlet
and contact our service center.
-- Failure to do so may cause fire or
electric shock.
• Make sure that a child does not
swallow the batteries when you
replace the old remote control
batteries with new ones. Keep
batteries out of reach of children.
-- If a child swallows a battery, consult
a doctor immediately.
• Do not look directly into the lens
when the product is in use. The
strong light may damage your eyes.
• When the product is on or has just
been turned off, avoid touching the
air vent because it will be very hot.
• If there is a gas leak, do not touch
the wall outlet. Open the window for
ventilation.
-- A spark may cause a fire or burn.
SAFETY INSTRUCTIONS
• Never touch the product or power
cord during thunder or lightning.
-- This may cause electric shock.
• Do not use the product near
electronic devices that generate a
strong magnetic field.
• Do not wear the plastic package
used to pack the product around your
head.
-- This may cause suffocation.
• Do not touch the product with your
hand for a long time when it is
running.
• When you play a game by connecting
a game console to a product, it is
recommended that you maintain a
distance of more than 1.5 times the
diagonal length of the screen.
• Make sure that the length of
connecting cable is long enough.
-- Otherwise, the product may fall
causing personal injury or damage
to the product.
7
CAUTION
• Do not place a heavy object on the
product.
-- It may fall down and cause physical
injury.
• Be careful to protect the lens from
heavy impact during transportation.
• Do not touch the cover glass of the
product.
• Otherwise, the cover glass may be
damaged.
• Do not use any sharp tools on the
product, such as a knife or hammer,
because this may damage the
casing.
• In the event that no image appears
on the screen or no sound is heard,
stop using the product. Switch off
the product, unplug it from the power
outlet and contact our service center.
Failure to do so may cause fire or
electric shock.
• Do not drop anything onto the
product or apply heavy pressure to it.
-- This may cause injury to persons or
the product malfunction.
• It is recommended that you maintain
a distance of more than 1.5 - 3 times
the diagonal length of the screen
between your eyes and the screen.
-- If you watch the screen at a close
distance for a long time, your
eyesight may become worse.
• When closing the door of the product,
be careful not to jam your finger.
-- This may cause injury to persons or
the product malfunction.
8
SAFETY INSTRUCTIONS
• Do not block the light emitted from
the product's lens with a book or a
cover. Long exposure to the light
may melt or burn the object, possibly
causing fire. In addition, the lens may
be overheated and the product may
be damaged by the reflected light.
Stop projecting temporarily or turn off
the power.
• Do not start the product with volume
high.
-- High volume may damage hearing.
Be sure to lower the volume before
turning off the product. Raise the
volume gradually after turning on
the product.
• When you go out, place the product
out of reach of pets or other animals,
and unplug it from the wall outlet.
-- Otherwise, it may cause short circuit
and fire.
Cleaning
WARNING
• Do not spray water directly to the
product when cleaning. Do not allow
water to get into the product or do not
allow it to get wet.
-- This may cause fire or electric
shock.
• In the event that smoke or a strange
smell comes out from the product or
a foreign object falls into the product,
stop using it. Switch off the product,
unplug it from the power outlet and
contact our service center.
-- Otherwise, this may cause fire or
electric shock.
• To remove dust or stains on the cover
glass, use an air spray or use a swab
or soft cloth to wipe the glass gently.
CAUTION
• Contact your seller or our service
center once a year to clean the
internal parts of the product.
-- If you do not clean the Laser Display for a long period of time,
dust will accumulate, which may
cause fire or damage to the product.
• When cleaning plastic parts, such as
the product case, unplug the power
first and wipe with a soft cloth. Do
not spray with water or wipe with a
wet cloth. When cleaning the plastic
parts, such as the product case,
do not use cleanser, automobile or
industrial shiner, abrasive or wax,
benzene, alcohol, etc., which can
damage the product.
-- This can cause fire, electric shock
or product damage (deformation,
corrosion and damage).
SAFETY INSTRUCTIONS
Others
WARNING
• Only a qualified technician can
disassemble or modify the product.
For inspection, adjustment, or repair,
contact your seller or our service
center.
-- Otherwise, this may cause fire or
electric shock.
CAUTION
• Make sure you use the same type of
new battery for replacement.
• Do not mix new batteries with old
ones.
-- Burst or leaking batteries may
cause fire or electric shock.
• Unplug the power cord if the product
is not used for a long period.
-- Accumulated dust may cause
electric shock due to overheating,
ignition, or poor insulation, or fire
due to a short circuit.
• Do not charge the battery using any
devices other than the one provided
with the product.
-- This may cause damage to the
battery or fire.
• Dispose of the used battery properly.
-- Failure to do so may cause
explosion or fire. The correct
method of disposal may vary
depending on your country or
region. Dispose of the battery
pack according to the appropriate
instructions.
• Do not throw or disassemble the
battery.
-- This may cause fire or explosion
due to damage to the battery.
• Always use batteries approved and
certified by LG Electronics.Failure to
do so may cause fire or explosion.
9
• Store the battery away from metallic
objects, such as keys and paper
clips.
-- Excess current may cause a rapid
increase in temperature, resulting in
damage to battery, fire or burns.
• Do not store the battery near any
heat source, such as a heater.
This may cause fire or product
malfunction.
• Do not store it at temperatures higher
than 60°C or in high humidity.
-- This may cause explosion or fire.
• Keep the battery out of reach of
children.
-- Failure to do so may cause personal
injury or product malfunction.
• Make sure that the battery is installed
correctly.Failure to do so may cause
explosion or fire.
• The battery contains lithium-ion, so it
must be handled with care.
-- Failure to do so may cause
explosion or fire.
10
SAFETY INSTRUCTIONS
Eye Care Sensor
WARNING
• Do not poke the sensor with a sharp
object.
- This can damage the sensor and
cause it to malfunction.
Laser
WARNING
• This product contains a laser module.
Do not disassemble or modify the
product as this could be dangerous.
• You risk being exposed to laser
radiation if you manipulate or alter the
product in a way not specified in the
user manual.
• To protect your eyes avoid looking
directly into the bright light from the
unit.
• Please kindly take a 5W 440 - 460nm
Laser protective goggles when you
need direct access the Light, and
do not use sun glasses for the eye
protection.
CAUTION
• Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
• This product is a class 2 laser device
that meets IEC 60825-1.
Laser Display standard: class 2 laser
product
Wavelength: 446 nm
Wave source : Approximately 0.2 mW
Light output: < 24.5 mW
Radiation angle: 66 °
Built-in laser standard:
Class 4 laser module
Wavelength: 435 nm - 455 nm
Light output: approx. 1.6 W x 36
SAFETY INSTRUCTIONS
11
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Viewing direction
Screen
- This Laser Display is a Risk Group 2
device that meets safety standard IEC
62471 standard.
Risk Group 2
Laser beam
direction
CAUTION. Possibly hazardous optical
radiation emitted from this product. Do
not stare at operating lamp. May be
harmful to the eye.
The label of Laser Display is attached to
the top of the product.
Laser Display Label
Laser warning symbol and danger symbol
12
SAFETY INSTRUCTIONS
FCC NOTICE
Federal Communications
Commission (FCC) Statement
You are cautioned that changes or
modifications not expressly approved
by the part responsible for compliance
could void the user’s authority to operate
the equipment.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
part 15 of the FCC rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
1) this device may not cause harmful
interference, and 2) this device must
accept any interference received,
including interference that may cause
undesired operation of the device of the
device.
FCC Caution
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
equipment and For indoor use only, use
outdoors or in other modes not covered
by this manual may violate the FCC
regulation and violate the user authority
to use the product. Specially, within the
5.15-5.25 GHz band, U-NII device is
restricted to indoor operations to reduce
any potential for harmful interference to
co-channel MSS operations.
FCC RF Radiation Exposure
Statement:
This equipment complies with FCC
radiation exposure limits set forth for
an uncontrolled environment. End
users must follow the specific operating
instructions for satisfying RF exposure
compliance.
SAFETY INSTRUCTIONS
Disposal of your old appliance
13
Disposal of waste
batteries/accumulators
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
through designated collection
facilities appointed by your
government or your local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office, waste
disposal service or the shop where
you purchased the product.
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005 %
of mercury, 0.002 % of cadmium or
0.004 % of lead.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or the
local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information about
disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
14
TABLE OF CONTENTS
TABLE OF CONTENTS
LICENSE
2
SAFETY INSTRUCTIONS
3
-- Indoor Installation
-- Power
-- When in Use
-- Cleaning
-- Others
-- Eye Care Sensor
-- Laser
4
5
6
8
9
10
10
PREPARATION
16
Accessories
16
Optional Accessories
17
Accessories Shipped with Product 17
Parts and Components
18
-- Front
18
-- Back
19
Status Indicator
20
Installation
21
-- Installation Precautions
21
-- Projection Distance per Screen Size
22
-- Kensington Security System
23
REMOTE CONTROL
24
MAGIC REMOTE CONTROL 26
-- Pairing the Magic Remote Control 27
-- Re-pairing the Magic Remote Control
27
-- Using the Magic Remote Control 27
SETTING UP THE LASER
DISPLAY
28
Setting Up the Laser Display
28
-- Initial Setup
28
-- Watching Laser Display
30
Additional Options
31
-- Adjusting the Aspect Ratio
31
-- Using the Edge Adj Function
32
-- Using the Input List
32
To use SIMPLINK
33
Explanation on SIMPLINK features 34
Using the Quick Menu
34
NETWORK FEATURES
35
NETWORK Settings
-- One-Click Network Connection
-- Expert Settings for Network
Connection
-- Wireless Network Connection
-- Wireless Network Setup
-- Tips for Network Setup
Using the Wi-Fi Screen Share
Function
-- Connecting the Wi-Fi Direct
Using WiDi
-- WiDi Setup (Wireless Display)
35
35
SmartShare™
39
35
36
36
37
38
38
38
38
Before Using
39
-- Connecting a USB Device
39
-- Removing a USB Device
39
-- Connecting DLNA
41
Using SmartShare™
43
-- Watching the Videos
44
-- Viewing the Photos
47
-- Listening to Music
48
Using the Magical Mirroring Function
49
Running Magical Mirroring
49
-- MirrorOp Sender 52
TABLE OF CONTENTS
15
CUSTOMIZING SETTINGS
55
MAINTENANCE
85
Settings
PICTURE Settings
SOUND Settings
TIME Settings
OPTION Settings
NETWORK Settings
55
56
60
62
63
66
Cleaning
-- Cleaning Cover Glass
-- Cleaning the Laser Display Case
Updating the Software
85
85
85
86
SPECIFICATIONS
87
CONNECTING EXTERNAL
DEVICES
68
Connecting an HD Receiver, DVD
Player, or VCR
-- HDMI connection
-- HDMI to DVI Connection
Connecting a PC
-- RGB Connection
-- HDMI to DVI Connection
-- RGB to DVI Connection
Connecting External Devices
-- AV Connection
Component Connection
Connecting Headphones
-- Headphone Connection
Connecting a Laptop
-- RGB Connection
-- HDMI connection
Using the TRIGGER Port
-- Motor screen connection
69
69
70
70
70
71
71
72
72
72
73
73
73
73
74
75
75
SERIAL COMMUNICATION
FUNCTION
76
Using Serial Communication
76
Establishing Serial Communication76
Communication Protocol
77
16
PREPARATION
PREPARATION
Accessories
Check the accessories provided with the product.
The picture may be different from the actual product.
Accessories are subject to change without prior notice in order to improve the
performance of the product. New accessories may be added or old ones may be
removed.
HQHUJ\
KHOS
LQSXW
XVE
VDYLQJ
EDFN
VOHHS
VHWWLQJV
VWLOO
EODQN
YRO
UDWLR
SDJH
PXWH
VHWWLQJV
P
DXWR
T1PHQX
?
T
T1PHQX
RN
DY#PRGH
H[LW
EDFN
HGJH#DGM
Remote Control
Two AAA Batteries
Magic Remote Control
Two AA Batteries
User Guide
Owner's Manual CD
Polishing Cloth
Power Cord
or
(AJ-BB100)
(AJ-BB105)
Ez Bracket
• When connecting a cable to the HDMI or USB port, make sure the bezel of the cable
is not too large and will not block other ports.
PREPARATION
17
Optional Accessories
To purchase optional accessories, visit an electronics store or an online shopping site.
Optional extras are subject to change without prior notice in order to improve the
product quality, and new optional accessories may be added.
Video Cable
Audio Cable
HDMI Cable
Optical Cable
PC Audio Port
Connection Cable
Cables for Connecting
External Devices
Ceiling Bracket
(AJ-CB100)
Sound Bar
Accessories Shipped with Product
These accessories are shipped with the product when you purchase it.
Hecto Laser Display
Projection Screen
(SC100/ SC105)
18
PREPARATION
Parts and Components
Front
* This Laser Display is manufactured using high-precision technology. You may,
however, see tiny black dots and/or bright spots that continuously appear on the
screen. This is a normal result of the manufacturing process and does not indicate a
malfunction.
* Ceiling light glare depends on the light levels in a room and the distance between the
product and the ceiling. It is not a product defect.
Vent1
Electric Door
Vent1
Speaker
USB IN 2 Port
Control Panel
Button
Description
Moves between menus and changes the settings.
,
-, +
Adjusts the volume level, or enters a sub menu and changes the
settings.
OK
Shows the current mode and saves changes to the settings.
SETTINGS
Displays or closes the Settings menu.
INPUT
Changes the input source.
(Power)
Turns the the Laser Display on or off.
1 Due to the high temperature of the vent area, do not get close to the vent area.
NOTE
• Press the "USB IN 2" label shown in the figure above to make the USB IN 2 port
visible.
PREPARATION
19
❼
❾
Back
❹
❺
❻
❸
❷
❶
RS-232C IN
❿
⓫
❶ Component IN Port
❷ TRIGGER(12 V) Port
Connect an external device (e.g., roll screen) to this port.
❸ USB IN1 Port
❹
❺
❻
❼
❽
❾
❿
H/P OUT Port
AV IN Port
HDMI IN 1(ARC), 2, 3(PC) Port
RGB IN Port
AUDIO IN (RGB/HDMI-PC) Port
LAN Port
OPTICAL DIGITAL AUDIO OUT Port
In standby mode, digital audio is not output.
⓫ RS-232C IN Port
❽
20
PREPARATION
Status Indicator
Operation/Status Indicator
Operation/
Status Indicator
Off
Power standby state (Power is off.)
Red
Power standby state
White
Warm stand-by (Power standby state)
White (Brightness
changes slowly.)
The Laser Display is in the process of
turning on or off.
Off
In operation
Red (blinking)
High temperature warning
Red (blinking) +
Purple once (blinking)
The Laser Display has turned off due to
the high temperature.
Red (blinking) +
There may be a problem inside the
Purple twice (blinking) product, so contact a local service center.
Red (blinking) +
Purple three times
(blinking)
White (blinking) +
Purple once (blinking)
White (blinking) +
Purple twice (blinking)
White (blinking) +
Purple three times
(blinking)
NOTE
• If you turn off the power, the Laser Display may not complete the operation in
progress depending on conditions and the operation/status indicator may turn red
(standby mode).
PREPARATION
21
Installation
Installation Precautions
• Place the product in a well-ventilated
environment.
-- To prevent the internal heat from
building up, install the Laser Display
in a well-ventilated place.
Do not place anything near the
Laser Display. That may block
its air vents. If the air vents are
blocked, the internal temperature
will increase.
-- Do not place the Laser Display on
a carpet or rug. If a product has its
inlet vent on its bottom, do not block
the vent and use the product on a
leveled solid surface.
-- Be sure to prevent foreign objects,
such as scraps of paper, from
entering the inlet vent.
-- Leave enough distance (30 cm or
more) around the vent of the Laser
Display.
• Do not place the product in a hot or
humid environment.
-- Do not place the product in a hot,
cold, or humid environment.
(See the details about the operating
temperature and humidity.)
• Do not place the product in a dusty
place.
-- This may cause fire.
• Never open any cover on the product.
There is a high risk of electric shock.
• The Laser Display is manufactured
using high-precision technology. You
may, however, see tiny black dots
and/or bright spots that continuously
appear on the screen. This is a
normal result of the manufacturing
process and does not indicate a
malfunction.
• The remote control may not work
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
international standard lamp for the
remote control to work normally.
• Do not open or press the electric door
or by force.
-- This may cause product
malfunction.
22
PREPARATION
Projection Distance per Screen Size
1
2
3
4
Place the Laser Display on a sturdy level surface, together with the computer or
audio/video source.
Place the Laser Display at an appropriate distance away from the screen. The
distance between the Laser Display and the screen determines the actual size of
the image.
Position the Laser Display so that the lens is perpendicular to the screen. If the
lens is not perpendicular to the screen, the image displayed on the screen may be
distorted. To correct the distortion, use the Edge Adj function.
Connect the power cords of the Laser Display and the connected devices to the
wall outlet.
Screen
C
D
B
A
16:9 Aspect Ratio (Unit: mm)
ARC
2540
(2213 x 1245)
A
550
B
530
C
262.5
D
370
PREPARATION
Kensington Security System
• This the Laser Display has a Kensington Security Standard connector to prevent
theft. Connect a Kensington Security System cable as shown below.
• For more information on installation and use of the Kensington Security System,
refer to the user guide provided with the Kensington Security System.
• The Kensington Security System is an optional accessory.
• What is Kensington?
Kensington is a company that provides safety systems for laptops and other
electronic devices.
Website: http://www.kensington.com
23
24
REMOTE CONTROL
REMOTE CONTROL
Open the battery cover on the back of the remote control
and insert the batteries which is specified in the battery
room with
poles pointing in the correct direction.
The new and same type of batteries (1.5 V AAA) must
be used.
CAUTION
• Do not mix new batteries with old ones.
HQHUJ\
KHOS
LQSXW
XVE
VDYLQJ
VOHHS
VWLOO
EODQN
YRO
UDWLR
SDJH
PXWH
VHWWLQJV
DXWR
T1PHQX
RN
DY#PRGH
EDFN
HGJH#DGM
H[LW
POWER
Turns the Laser Display on or off.
ENERGY SAVING ꕊ
Changes the energy saving mode.
HELP
Enables the self-diagnosis.
INPUT
Changes the input source.
USB
Accesses USB mode.
Number buttons
Enters a number.
SLEEP
Sets the length of time until the Laser Display turns
off.
STILL
Freezes the moving image.
(Available in any mode other than DivX)
VOL +, Adjusts the volume level.
BLANK
Displays the empty screen for a while.
RATIO
Resizes the picture.
MUTE
Mutes the sound of the Laser Display.
PAGE ,
Moves to the previous/next page.
VOHHS
VWLOO
REMOTE CONTROL
EODQN
HQHUJ\
YRO
KHOS
UDWLR
LQSXW
XVE
VDYLQJ
PXWH
VHWWLQJV
VOHHS
VWLOO
EODQN
YRO
DXWR
UDWLR
RN
SDJH
PXWH
VHWWLQJV
DXWR
RN
T1PHQX
DY#PRGH
SDJH
SETTINGS
Displays or closes the Settings menu.
AUTO
T1PHQX
Automatically adjusts the PC input image.
Q.MENU
Changes the settings easily.
Up/Down/Left/Right buttons
Switches between menu functions.
OK
Shows the current mode and saves changes to the
settings.
BACK
Returns to the previous screen.
AV MODE
Sets the genrwe for the Laser Display program.
EXIT
Closes
H[LW a menu.
EDFN
DY#PRGH
EDFN
HGJH#DGM
HGJH#DGM
H[LW
Color buttons
Sets detailed settings or gesture for each menu.
Playback control buttons
Controls the playback of SmartShare.
Allows you to use the SimpLink function.
EDGE ADJ
Adjusts the image to fit the screen.
NOTE
• For seamless operation, do not block the IR receiver.
25
26
MAGIC REMOTE CONTROL
MAGIC REMOTE CONTROL
PUS
H
If the battery low message appears while using the Laser
Display, replace the batteries.
As shown in the figure, press the top of the battery cover
and slide it down the cover. Insert two new and identical
alkaline batteries (1.5V, AA type) with + and - poles
pointing in the correct direction in the remote control.
CAUTION
• Do not mix new batteries with old ones.
Pointer Signal Transmitter
BACK
ⱞⳮ
Press this button during
menuHOME
selection to return to the
previous step.
HOME
, , BACK
,
(top, bottom, left, right)
POWER
Turns Laser Display on or off.
EDFN
VHWWLQJV
ⱞⳮ
HOME
ⱞⳮ
HOME
ⱞⳮ
SETTINGS
or closes the Settings
menu.
Wheel (OK)
Select a menu or option.
If you press the , , or
button while the pointer is moving,
the pointer disappears and the
Magic remote control operates as
a normal remote control.
ㄮᗺ
To display the pointer on the
screen, shake the Magic remote
control to the left/right.
HOME
Displays
ⰶᲳ
ⰶᲳ
ㄮᗺ
(+, -)
Adjusts the volume level.
( , )P
Moves to the previous/next? YRO
page.
ⰶᲳ
ㄮᗺẲⱞ⩛
MUTE
/ხ㢢☎⳿
Mutes the sound of the Laser Display.
?
Opens the self-diagnosis
Ẳⱞ⩛
/ხ㢢☎⳿
window.
Ẳⱞ⩛
/ხ㢢☎⳿
P
ⰶᲳ
FK
?
?
T
T1PHQX
P\#DSSV
/T1PHQX
ㄮᗺ
?
?
Ẳⱞ⩛
Q.MENU: Shows the Q.MENU.
/ხ㢢☎⳿
MAGIC REMOTE CONTROL
27
Pairing the Magic Remote Control
You must pair the Magic remote control with the Laser Display to use it.
Pair the Magic remote control prior to use as follows:
1
2
Turn on the Laser Display and press the
Wheel (OK) button towards the Laser
Display. When the pairing is complete, the pairing completion message is displayed
on the Laser Display screen.
If the remote failed to pair, turn the Laser Display off and on and try pairing again by
pressing the
Wheel (OK) button.
Re-pairing the Magic Remote Control
1
Press the SETTINGS button and BACK button at the same time for about
HOME
5 seconds.
The Magic remote control will pair again when you press the
wheel (OK) button.
ⱞⳮ
2
Press the BACK button while pointing the remote control at the Laser Display for
about 5 seconds to reset and pair the remote control. When the pairing is complete,
the pairing completion message is displayed on the Laser Display screen.
Using the Magic Remote Control
1ⰶᲳ
Shake theㄮᗺ
Magic remote control lightly when there is no pointer displayed on the
2
screen. A pointer will be displayed on the screen.
→ The pointer disappears if the remote control is not used for a
certain period of time.
?
When you
move the pointer signal transmitter up/down/left/right
Ẳⱞ⩛
/ხ㢢☎⳿
while pointing
it toward the Laser Display, the pointer moves.
→ If the pointer is not working properly, do not move the Magic
remote control for about 10 seconds, and then try again.
NOTE
• Use the remote control within the specified range (10 meters). You may
experience communication failures when using the device outside the coverage
area or if there are obstacles within the coverage area.
• You may experience communication failures depending on nearby devices.
Devices, such as a microwave oven and wireless LAN, operate in the same
frequency band (2.4 GHz) as the Magic remote control. This may cause
communication failures.
• The Magic remote control may become damaged or may malfunction if it is
dropped or receives a heavy impact.
• Take care not to bump into nearby furniture, electronics or other people when
using the Magic remote control.
28
SETTING UP THE LASER DISPLAY
SETTING UP THE LASER DISPLAY
Setting Up the Laser Display
Initial Setup
1
2
3
Connect the power cord correctly.
After waiting for a moment, press the POWER button on the remote control or the
control panel.
When you turn on the Laser Display for the first time, a setting screen appears as
shown below.
Here, you can specify the items required for watching the Laser Display more easily.
SETTING UP THE LASER DISPLAY
29
30
SETTING UP THE LASER DISPLAY
Watching Laser Display
1
2
3
When in Standby mode, press the
POWER button to turn the Laser
Display on.
Press the INPUT button and select
the input signal you want.
Control the Laser Display using the
following buttons while watching the
screen.
Button
VOL -, +
MUTE
Q.MENU
Edge Adj
4
Description
Adjusts the volume level.
Mutes the sound from the
Laser Display.
Enters the quick menu.
Adjusts the image to fit the
screen.
To turn off the Laser Display, press
the POWER button.
SETTING UP THE LASER DISPLAY
Additional Options
31
-- 4:3: Resizes images to the aspect
ratio.
Adjusting the Aspect Ratio
You can adjust the aspect ratio of
the picture by pressing RATIO while
watching Laser Display.
NOTE
• Available options may vary
depending on the input signal.
• You can also use the Q.MENU or
SETTINGS button.
-- Zoom: Enlarges an image to fit the
screen width. The top and bottom of
the image may be truncated.
• Press the or button to zoom in
or out of the image.
• Press the or button to move
the image.
-- 16:9: Resizes images to fit the screen
width.
-- Just Scan: Displays video images in
the original size without cutting off the
edges.
-- Cinema Zoom 1: Formats an image
to the cinemascope ratio, 2.35:1. It
ranges from 1 to 16.
• Press the or button to zoom in
or out of the image.
• Press the or button to move
the image.
Just Scan
NOTE
• For Just Scan, you may see image
noises at the edges of the screen.
-- Set By Program: Displays images in
the same aspect ratio as the original
image.
Set By Program
NOTE
• If you enlarge or reduce the
picture, it may be distorted.
32
SETTING UP THE LASER DISPLAY
Using the Edge Adj Function
To prevent the screen image from
becoming trapezoidal, Edge Adj adjusts
the top and bottom width of the image if
the Laser Display is not set up at a right
angle to the screen.
Because the Edge Adj function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the Laser Display at an optimal
angle.
Using the Input List
Using the Input List
1
Press the INPUT button to display
the input selection screen.
Input List
Select an input device to view.
AV
Component
RGB-PC1
HDMI 1
HDMI 2
HDMI 3
Change Device name
2
SimpLink Setting
Select an input signal using the
INPUT button to switch the Laser
Display to the desired input mode.
You can use the or button to
switch between all the input modes.
Selecting an Input Label
1
Adjust the screen using the EDGE
ADJ button.
• The value range of Edge Adj is as
follows.
Left top (H: 0 ~ 100, V: 0 ~ 100)
Right top (H: -100 ~ 0, V: 0 ~ 100)
Left bottom (H: 0 ~ 100, V: -100 ~ 0)
Right bottom (H: -100 ~ 0, V:-100 ~ 0)
2
You can select an input label to display
which devices are connected to which
input ports.
Input label
AV
NOTE
RGB-PC
HDMI 1
HDMI 2
Select a device to change name.
Press the OK button after
adjustment.
• While you use the Test Pattern
option, the keys on the control
panel do not work.
Component
Close
Change Device name
1
2
3
4
SimpLink
Press the INPUT button to display
the input selection screen.
Press the red button.
Press the or button to select an
input and press OK button.
Use the , , or button to
select a device name.
SETTING UP THE LASER DISPLAY
To use SIMPLINK
SIMPLINK allows users to control and
manage multiple multimedia devices
using the convenient Laser Display
remote control and SIMPLINK menu.
1
2
3
4
5
6
Connect the Laser Display's HDMI
IN terminal with SIMPLINK device's
HDMI output terminal using HDMI
cable. For home theater units with
SIMPLINK function, connect HDMI
terminals as above and use an
optical cable to connect Optical
Digital Audio Out from the Laser
Display to Optical Digital Audio In of
the SIMPLINK device.
Press the SIMPLINK button.
SIMPLINK menu window appears.
Select Set SIMPLINK on SIMPLINK
menu window. SIMPLINK setup
window appears.
Set SIMPLINK to On in SIMPLINK
setup window.
Close SIMPLINK setup window.
Select the device to control from
SIMPLINK.
33
NOTE
• This function works only on
devices with the SIMPLINK logo
(
).
• Make sure that the external device
has a SIMPLINK logo.
• To use SIMPLINK function, use
a high-speed HDMIⓇ cable (with
CEC, or Consumer Electronics
Control feature added) and No.
13 pin connected for information
exchange between devices.
• Turn on or select the media of a
device with home theater features
to see the speaker switch to HT
Speaker.
• Connect with an Optical cable
(sold separately) to use HT
Speaker.
• Switching to external input causes
devices operating with SIMPLINK
to stop.
• Use of a third-party device with
HDMI-CEC features may cause
malfunctions.
34
SETTING UP THE LASER DISPLAY
Explanation on
SIMPLINK features
Menu
Direct Play
Description
Play the multimedia
device on the Laser
Display instantly without
extra steps.
Select
Select the desired
multimedia device through the
device.
SIMPLINK menu and
instantly control it from
the Laser Display
screen.
Disc
Manage the multimedia
playback
device with the Laser
Display remote control.
Power off
Turning the Laser
all devices Display off with Auto
Power function On in
SIMPLINK setting will
turn the power off on all
SIMPLINK-connected
devices.
Sync Power If the Auto Power
on
function is set to On in
the SIMPLINK settings,
turning on a SIMPLINK
device will turn the Laser
Display on.
Speaker
Selects speaker on the
home theater unit or
Laser Display.
Using the Quick Menu
You can customize frequently used
menus.
1
2
Press Q.MENU to access the quick
menus.
Press the or button to select a
menu and press OK.
Menu
Aspect
Ratio
Picture
Mode
Sound
Mode
Sleep
Timer
Description
Resizes the picture.
Changes the picture
mode.
Sets the sound mode.
Sets the Laser Display
to be turned off at the
specified time.
ENERGY Adjusts the brightness.
SAVING
AV MODE Sets the genre.
Caption
Sets whether to display
captions.
USB
Allows you to remove a
Device
connected USB device in
a safe manner.(Displayed
only when a USB device is
connected.)
3
Press the , , or button to
scroll through the following menus.
NETWORK FEATURES
35
NETWORK FEATURES
NETWORK Settings
To use the smart functions, the wired or
wireless Internet must be connected.
Once the Internet is connected, you can
use DLNA functions, etc.
One-Click Network Connection
You can make a wireless network
connection easily.
1
2
3
4
Press the SETTINGS button.
Press the or button to select
NETWORK and press the OK
button.
Use the , , or button to set
Network Connection and press the
OK button.
It is automatically connected to the
network.
See the Help provided by the Laser
Display.
Expert Settings for Network
Connection
It is used in a specific environment such
as office (where fixed IP, etc. is used).
1
2
3
4
5
Press the SETTINGS button.
Press the or button to select
NETWORK and press the OK
button.
Use the , , or button to set
Network Connection and press the
OK button.
Select Set Expert in the network
connection list.
Select one of the following network
connection methods.
Item
AP List
Description
Select a network from a router
list.
Enter
Directly enter the name of the
the SSID wireless router to connect.
WPSPress the WPS button on the
PBC
wireless router supporting the
PBC to connect to the router in a
simple manner.
WPSEnter the PIN number in the
PIN
web page of the PIN-supporting
wireless router to connect to the
router in a simple manner.
Ad-hoc Use the PC, mobile phone, etc.
which is connected to Wi-Fi.
36
NETWORK FEATURES
Wireless Network Connection
You can use a wireless network by using the built-in wireless network module as shown
below.
A wireless router must be installed and operating at this time. Refer to the wireless
router's user manual to see how to install it.
The network settings and connection may be different depending on the network
environment. Set up the router as instructed in its user manual.
RS-232C IN
Wireless
Router
@
LAN
Cable Modem
WAN
Ethernet
Internet
Wireless Network Setup
This function allows you to use the wireless connection e.g., Wi-Fi Direct and WiDi.
You can share the screen of the device connected by the Wi-Fi Screen Share on the
SmartShare.
Turn on the Wi-Fi Screen Share. A list of devices available for connection is displayed.
Select a device to connect. A connection request message is displayed. Select Yes.
The Wi-Fi Screen Share is then connected.
1
2
3
Press the SETTINGS button.
Use the
,
Press the ,
OK button.
,
or
,
or
button to select NETWORK and press the OK button.
button to select Wi-Fi Screen Share and then press the
NETWORK FEATURES
Tips for Network Setup
• Modem reconfiguration may cause
network connection problems. If
it does, turn off the modem and
disconnect it from the product; then
turn on the modem again. It will be
working normally.
• LG Electronics is not responsible for
any Internet connection problems, or
any failure, error or malfunction due
to your Internet connection.
• The network connection may not
be working properly because of the
Internet Service Provider (ISP).
• DSL service requires a DSL modem,
and cable service requires a cable
modem. Internet connections may
be limited due to an agreement with
an Internet service provider (ISP)
and the Laser Display may not be
connected to a network. (When only
one device is allowed per line and
a PC is already connected, other
devices are not available for use.)
• The wireless network may be
affected by interference from a device
that uses 2.4 GHz frequency, such
as a wireless telephone, Bluetooth
device or microwave. Interference
may also be caused by a device that
uses 5 GHz frequency such as Wi-Fi
devices.
• The wireless network service may
run slowly depending on surrounding
wireless environment.
• Some devices may have network
traffic jam if any of local home
networks is turned on.
37
• To connect to a wireless router,
a router that supports wireless
connection is necessary; the
wireless connection function of
the corresponding router must
also be activated. Ask the router
manufacturer whether the router
supports wireless connection.
• To connect to a wireless router, verify
the SSID and security settings of
the wireless router. Please refer to
the user guide of the corresponding
router regarding SSID and security
settings of the wireless router.
• The Laser Display may not slow
down or malfunction if network
devices (wire/wireless router or hub,
etc.) are incorrectly set up. Be sure
to install the devices correctly by
referring to their user guides before
configuring the network connection.
• When Ad-hoc is used, it may not be
able to connect depending on the
device (for example, laptop) that is
connected.
• The connection method may vary
according to the manufacturer of the
wireless router.
38
NETWORK FEATURES
Using the Wi-Fi Screen
Share Function
With this function, you can use a
wireless connection such as Wi-Fi Direct
or WiDi, etc.
Using SmartShare, you can share a
device's screen through Wi-Fi Screen
Share.
Using WiDi
WiDi represents Wireless Display. It is a
system that sends video and sound files
a notebook PC that supports Intel WiDi.
WiDi Setup (Wireless Display)
Connecting the Wi-Fi Direct
1
2
1
2
3
3
4
5
6
7
8
9
Press the SETTINGS button.
Press the or button to select
NETWORK and press the OK
button.
Press the , , or button to
select Wi-Fi Screen Share and then
press the OK button.
Set Wi-Fi Screen Share to On. (If
you don't want to use this function,
set to Off.)
Enable Wi-Fi Direct on the device
that you want to connect to.
The list of devices that can connect
to the Laser Display is displayed.
4
5
6
7
Select a device to connect.
Select Yes when the connection
request message appears.
If the device that you want to
connect to accepts the request, WiFi Screen Share will be connected.
8
Press the SETTINGS button.
Use the , , or button to
select NETWORK and press the OK
button.
Press the , , or button to
select Wi-Fi Screen Share and then
press the OK button.
Set Wi-Fi Screen Share to On.
(If you don't want to use this
function, set to Off.)
Your laptop runs the Intel WiDi
program ( ).
The nearby LG Laser Displays
supporting WiDi are searched. In
the list, select the Laser Display you
want and click Connect.
Enter the 4-digit MY PIN number
displayed on the Laser Display in the
Intel WiDi program input field on a
laptop and press Continue.
In a moment, the laptop screen
is displayed on the Laser Display
screen. The wireless environment
may affect the screen display. If the
connection is poor, the Intel WiDi
connection may be lost.
* For more information on how to use
the Intel WiDi, visit http://intel.com/
go/widi.
SmartShare™
SmartShare™
Before Using
Connecting a USB Device
Connect a USB device (external HDD,
USB memory) to the USB port of Laser
Display to enjoy the content files stored
in the USB device with your Laser
Display.
You cannot write or delete data in the
USB device.
Connect a USB flash drive as shown
below.
USB flash drive
39
Removing a USB Device
1
2
3
Press Q.MENU to access the quick
menus.
Use the or button to move
to USB Device and press the OK
button.
Remove the USB device.
NOTE
• After the USB device is
disconnected, it cannot be read.
Remove the USB device and
connect it again.
40
SmartShare™
Tips for Using a USB Device
Supported Files for SmartShare™
• A USB device which has a built-in
automatic recognition program or
uses its own driver might not be
recognizable.
• Some USB devices may not be
supported or will not work properly.
• Please use only a USB device
formatted as a FAT32 or NTFS file
system provided by Windows.
• It is recommended to use an external
USB hard disk with rated voltage
of 5V or less and rated current of
500mA or less.
• It is recommended to use a USB
hub or hard disk drive with power
supplied. (If the power supplied is not
enough, the USB device may not be
detected properly.)
• It is recommended to use a USB
memory stick which is 32 GB or less
and a USB hard drive which is 2 TB
or less.
• If a USB external hard drive with
the power saving function does not
work, turn the hard drive off and on
again to make it work properly. See
the owner's manual of the USB hard
drive for more information.
• The data of a USB device may be
damaged, so it is recommended
to back up any important files.
Users are responsible for data
management. The manufacturer
bears no responsibility.
• Maximum data transmission rate:
20 Mbps (Megabit per second)
• Supported external subtitle formats:
*.smi, *.srt, *.sub (MicroDVD,
SubViewer 1.0/2.0), *.ass, *.ssa,
*.txt (TMPlayer), *.psb (PowerDivX)
• Supported internal subtitle formats:
XSUB (subtitles from DivX6 are
supported)
Subtitle Language
Subtitle
Language
Language
Latin1
English, Spanish,
French, German, Italian,
Swedish, Finnish, Dutch,
Portuguese, Danish,
Romanian, Norwegian,
Albanian, Gaelic, Welsh,
Irish, Catalan, Valencian
Latin2
Bosnian, Polish, Croatian,
Czech, Slovak, Slovenian,
Serbian, Hungarian
Latin4
Estonian, Latvian,
Lithuanian
Cyrillic
Bulgarian, Macedonian,
Russian, Ukranian,
Kazakh
Greek
Greek
Turkish
Turkish
Hebrew
Modern Hebrew
Chinese
Simplified Chinese
Korean
Korean
Arabic
Arabic
SmartShare™
Connecting DLNA
Connecting DLNA DMR (Digital
Digital Living Network Alliance (DLNA)
allows you to enjoy videos, music and
photos saved on your PC or server
using the Laser Display through a home
network.
Media Renderer)
Connecting the DLNA-Certified
Mobile Device
Laser Display and smartphone should
be connected to the same network.
1
2
3
4
5
6
7
8
Enable Wi-Fi on the smartphone.
Install/run the app to share content
on the smartphone.
With the Windows 7 or Window 8 PC
operating system or DLNA-certified
device (e.g. mobile phone), music/
videos/photos may be played on the
Laser Display without installing a
separate program.
1
2
Run “Share my mobile phone
Content”.
Select the kind of Content (video/
music/photo) to play.
Select the video, music, or photo file
to play on Laser Display.
Select Add to Playlist.
On the device that you want to play
the file, select the Laser Display
model. (You can find the Laser
Display model name on the product
label.)
Play ▶ Enjoy the selected file on
Laser Display.
41
3
Configure the Laser Display and
PC on the same network. Configure
Windows 7 or Window 8-installed PC
on the network.
To replay a music/video/photo file,
right-click on the file and use the
“Remote Playback” Windows 7 or
Window 8 feature.
To play on your mobile device, refer
to its user manual.
Content will be played in only one
device even though more than
one Laser Display or device is
connected. Play speed can vary
depending on network speed.
42
SmartShare™
Connecting DLNA DMP (Digital
When DLNA is Malfunctioning
Media Player)
• Check your network settings when
the DLNA option does not work
properly.
• To watch the 1080p video through
DLNA, a router that uses 5 GHz
frequency is required. If a 2.4 GHz
router is used, the video does not
play properly.
• When playing a video in DLNA mode,
the Multi Audio and Closed Caption
features are not supported.
• If multiple Laser Displays are
connected to one server in the
DLNA mode, the content may not be
played properly depending on server
performance.
• Subtitles are only supported on some
DMC devices.
• The DLNA function may not work
properly depending on the network
environment.
• The DLNA function may not be
supported for a router that does
not support multi-cast. For more
information, refer to the user guide
that came with your router or contact
to the manufacturer.
• Even for the file format supported by
the Laser Display, the supported file
format may differ depending on the
DLNA server environment.
• If there are too many folders or files
in a folder, it may not work properly.
• The information on the file imported
from the DLNA server may not be
displayed correctly.
• When viewing video subtitles on a
DLNA server, we recommend that
you use SmartShare PC Software.
• When a subtitle file is added later,
disable the shared folder and then
enable it again.
• The DRM file and document file in the
DLNA server are not played.
With a PC having SmartShare PC
Software, music/video/photo files may
be replayed on the Laser Display by
linking them via home networking.
1
2
3
Configure the Laser Display and
the PC on the same network. Laser
Display and each device should be
connected through a single access
point to enable DLNA service.
Install SmartShare PC Software
on PC from the web site. Before
installation, close all running
programs including firewall and
Anti-Virus programs.
The sever should be running in order
to watch the shared file on your
Laser Display.
NOTE
• For how to use the SmartShare
PC software, refer to the software
help.
SmartShare™
43
Using SmartShare™
1
Press the USB button on the remote control.
You can watch the photo, music and video on the Laser Display by connecting a USB
or home network (DLNA). It shows all the photos, music and videos in the device
connected to the Laser Display.
44
SmartShare™
Watching the Videos
In the Movie List, you can watch movies
stored on the connected USB device.
Tips for Playing Videos
• Some subtitles created by a user may
not work.
• A video file and its subtitle file must
be located in the same folder. A video
file name and its subtitle file name
must be identical in order to display
the subtitle properly.
• Streaming of files encoded by GMC
(Global Motion Compensation) or
Qpel (Quarterpel Motion Estimation)
is not supported.
• H.264/AVC profile level 4.1 or below
is supported.
• The file sizes that can be played
may be different depending on the
encoding environment.
• Video files created by some encoders
may not be played back.
• Video files in formats other than
the ones specified here may not be
played back.
• Videos stored on a USB device
that does not support high-speed
playback may not play properly.
• The DTS is supported only for
playback of USB video files.
SmartShare™
Video Codec
Maximum supported resolution: 1920 x 1080 @ 30p
Extension
.asf
.wmv
.divx
.avi
.mp4
.m4v
.mov
.mkv
.ts
.trp
.tp
.vob
.mpg
.mpeg
Codec
Video
VC-1 Advanced Profile, VC-1 Simple and Main Profile
Audio
WMA Standard, WMA 9 Professional
Video
DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC,
Motion Jpeg
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, LPCM, ADPCM, DTS
Video
H.264/AVC, MPEG-4 Part 2
Audio
AAC
Video
H.264/AVC
Audio
HE-AAC, Dolby Digital
Video
H.264/AVC, MPEG-2, VC-1
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
Dolby Digital, Dolby Digital Plus, AAC
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
Video
MPEG-1
Audio
MPEG-1 Layer I, II
45
46
SmartShare™
Controlling the Video Playback
You can control playback using the following buttons.
Option
Item
List
Description
Shows the current playing position. You can use the
backward.
Stops playing and returns to Movie List.
or
button to move forward or
Resumes normal playback.
Pauses the media player.
Displays in slow motion.
Option
List
Whenever this button is pressed, the playback speed is increased or decreased by
one unit.
Sets the option.
Stops the playback and returns to the list.
SmartShare™
Viewing the Photos
You can view photos stored on a connected device.
Photo File
File Format
2D
(jpeg, jpg, jpe)
Item
Supported
format
Size
Information
SOF0: baseline
SOF1: Extend Sequential
SOF2: Progressive
Min.
64 x 64
Max.
Normal Type: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
Controlling the Photo Playback
You can control playback using the following buttons.
Slideshow
BGM
Option
List
Item
Description
Selects the previous or next photo.
,
Slideshow If no picture is selected, all photos in the current folder are displayed in a slide
BGM
Option
List
show. If one or photos are selected, those photos are displayed in a slide show.
Set Slide Speed in the Option → Set Photo View menu.
You can listen to music while viewing full-size photos.
Set BGM in the Option → Set Photo View menu.
Rotates photos.
Rotates a photo 90°, 180°, 270°, 360° clockwise.
Photos cannot be rotated if their width is greater than the height of the maximum
supported resolution.
Enlarges or reduces the photo.
Use the Up/Down/Left/Right buttons to select a page and press the OK button.
A setting popup window will appear.
Stops the playback and returns to the list.
47
48
SmartShare™
Listening to Music
You can play audio files stored on the connected device.
Audio File
File Format
Item
Bit rate
MP3
Sample freq.
Support
Information
32 Kbps - 320 Kbps
16 kHz - 48 kHz
MPEG1, MPEG2, Layer2, Layer3
Controlling Music Playback
You can control playback using the following buttons.
Option
Item
Description
Changes the playing position.
Stops playing.
Resumes normal playback.
Plays the previous/next file.
Sets the repeat playback.
Sets the random playback.
Option
List
Sets Option for the music list.
Returns to a list.
List
SmartShare™
49
Using the Magical Mirroring Function
The Magical Mirroring feature is used to wirelessly transmit and project the screen of
a network-connected laptop (PC) to the Laser Display. To use this function, MirrorOp
Sender, an application for PC, should be installed in the user's laptop (PC).
You can download this PC program from www.mirrorop.com/products_support/LG/. (To
obtain a full-featured MirrorOp Sender program, a user should purchase one.)
System Requirements
CPU
Display Adaptor
Dual core 1.8 GHz or higher (excluding Atom processor)
nVIDIA or ATI graphic card with 64MB VRAM or above
Operating System
Windows Vista, Windows 7
Wi-Fi
802.11 n
Running Magical Mirroring
1
Select Magical Mirroring from the Settings.
NETWORK
• Network Connection
• Network Status
• Wi-Fi Screen Share
• Smart Share Setting
• Magical Mirroring
Ͱ
CAUTION
• Magical Mirroring is available only when a network is connected.
• When Magical Mirroring is running, only the following buttons are available on the
remote control and control panel: Power, Volume, Previous and Exit.
50
2
3
SmartShare™
After running Magical Mirroring, execute the MirrorOp Sender program in the PC on
a standby screen as follows.
In the Remote Device IP field of the MirrorOp Sender, enter the IP which is the
same as the host IP of the Magical Mirroring and press Connect.
<PC Screen>
SmartShare™
4
51
If MirrorOp Sender is connected normally, the connected PCs are displayed
in Device List of Magical Mirroring as shown below. (All connected PCs are
displayed.)
If MirrorOp Sender does not run, Device List of Magical Mirroring is shown as
follows. Check the network connection.
5
In the Device List, select a desired PC by pressing the Up/Down key and press the
OK button.
CAUTION
• While running Magical Mirroring, the video or audio transmitted from the PC may
be interrupted due to PC performance or wireless network status.
52
SmartShare™
MirrorOp Sender
Changing MirrorOp Mode
Move the button to this position to change the transfer mode to application mode.
Move the button to this position to change the transfer mode to movie mode.
Mode
Application Mode
Movie Mode
Description
When MirrorOp is set to this mode, the software will transfer images with
greater quality. When you run applications such as games, you can set
to this mode. This mode requires broadband, so we suggest you use the
wired network when using this mode.
This mode is only for movies. When you play a movie on your PC, you can
change to this mode. In this mode, the mouse and other applications do
not work in real time.
SmartShare™
53
Configuring MirrorOp
-- Search Host
• Searches the devices available for connection on the local network.
-- Projection Quality
• Changes the quality of the projected image. If the network speed is high, select
'Best'; if not, select 'Normal'.
-- Remote Cursor Size
• Controls the size of mouse cursor (1x, 2x, 3x).
NOTE
• Using this option, you can select "Normal" or "Best" for the projection quality. If the
network connection is good, select "Best"; if not, "Normal".
54
SmartShare™
-- TV Offset Compensation
• Adjusts the size of screen projected to the Laser Display. Adjust the horizontal and
vertical offset, and click the Apply button.
-- Auto Power Management
• Choose this option when you run the MirrorOp application on your laptop.
This option enables your Wi-Fi network to always work at an optimum level.
-- Auto Wi-Fi Connect
• When you choose this option, your MirrorOp will automatically connect to the server
and log in.
-- Advanced Screen Capture
• Different PCs have different video output formats. When this option is not selected,
some video images might not be displayed normally, for example, when you play a
movie using a certain media player. When you play a movie on your PC and cannot
see it with Laser Display, you should choose this option.
-- Activate This Sender Software
• If you purchased or already have a license, please enter the license information.
-- Check for Updates...
• Check the newest version on the network.
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
SETTINGS
1
2
3
4
Press the SETTINGS button.
Use the
,
,
or
button to select a desired item and press the OK button.
Use the
,
,
or
button to set the desired item and press the OK button.
Press the EXIT button when completed.
Menu
PICTURE
SOUND
TIME
OPTION
Description
Adjusts the image quality for optimal viewing.
Adjusts the sound quality and volume level.
Time-releated features.
Customizes the general settings.
NETWORK Sets the network.
SUPPORT
Shows the Laser Display information.
55
56
CUSTOMIZING SETTINGS
PICTURE Settings
1
2
3
Press the SETTINGS button.
PICTURE
Use the or button to select PICTURE and
press the OK button.
︿
• ꕊEnergySaving:Medium
• PictureMode :Vivid
• Contrast
100
• Brightness 50
• Sharpness 25
• Color
60
• Tint
0
Use the , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
G
R
﹀
?
The available picture settings are described as follows.
Item
ENERGY
SAVING
PICTURE
Mode
Description
Adjusts the brightness.
Selects one of the preset images or customizes options in each mode
for the best screen performance.
You can also customize advanced options for each mode.
Mode
Vivid
Standard
Cinema
Game
Maximizes the visual effect of video.
Displays a crystal clear picture by enhancing contrast,
brightness, and sharpness.
Displays the picture with normal contrast, brightness and
sharpness.
Optimizes the image for a movie.
Optimizes the image for playing games on fast-moving
screens.
Expert1/2 Adjusts the detailed image settings.
Contrast
Increases or decreases the gradient of the video signal.
Brightness Adjusts the base level of the video signal to make the image brighter or
darker.
Sharpness Adjusts the level of edge sharpness between the light and dark areas of
the picture. The lower the level is, the softer the image looks.
Horizontal and Vertical Sharpness are available only in Expert1/2.
Color
Adjusts the intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Advanced Customizes the advanced settings.
Control
Picture
Sets optional settings.
Option
CUSTOMIZING SETTINGS
Item
Picture
Reset
Aspect
Ratio
Picture
Wizard II
Screen
(RGB-PC)
57
Description
Restores each mode's options to the factory default.
Resizes the picture.
By following the instructions, you can easily adjust the picture quality
to technical standards using the remote control without needing an
expensive pattern device or a picture quality expert.
Adjusts the picture quality in RGB-PC input.
Item
Resolution
Available resolution is 768
(1024x768/1280x768/1360x768, 60 Hz).
Auto Config. Provides optimized picture quality by automatically
calibrating mismatched horizontal width and a shaky
picture caused by conflicts between the internal settings
of the Laser Display and various PC graphic signals.
You can also use the AUTO button on the remote control.
Position
Moves the image up/down/left/right.
Size
Changes the screen size.
Phase
Makes the picture look clear by removing horizontal noise.
Reset
Restores all the settings to the factory default.
Advanced Control
Item
Description
Dynamic
Contrast
Dynamic
Color
Clear White
Preferred
Color
Adjusts the contrast to keep it at the best level for the brightness of
the screen.
Adjusts screen colors so that they look natural.
Super
Resolution
Color
Temperature
Gamma
Color Gamut
Improves blurry and unclear parts in the picture to make the picture
more vivid.
Adjusts the overall color of the screen to suit your preference. You can
select Warm, Cool, Medium or Natural.
Sets a gradation curve between video input and output signal.
Selects the range of colors to display.
Standard: Displays the original colors of an input signal regardless of
the display features.
Wide: Sets to use the rich colors of the display.
Makes the white area of the screen look brighter and whiter.
Skin Color
Adjusts the skin color in the picture to your
preference.
Grass Color Adjusts only the natural color area of e.g., field and
mountain.
Sky Color
Adjusts only the color of the sky.
Available options may differ depending on the input signal or video mode, etc.
58
CUSTOMIZING SETTINGS
Expert Control
Item
Description
Dynamic
Contrast
Super
Resolution
Color Gamut
Adjusts the contrast to keep it at the best level for the brightness of
the screen.
Improves blurry and unclear parts in the picture to make the picture
more vivid.
Selects the range of colors to display.
Standard: Displays the original colors of an input signal regardless of
the display features.
Wide: Sets to use the rich colors of the display.
Provides much sharper and clearer edges to the picture.
Edge
Enhancer
xvYCC
Color Filter
Gamma
Expert
Pattern
White
Balance
Color
Management
system
Displays much richer colors.
Accurately adjusts color and tint by filtering a specific color area of
RGB space.
Sets a gradation curve between video input and output signal.
Patterns used for expert adjustment.
Adjusts white balance. Detailed adjustment is possible as shown
below.
Color Temperature: Select Warm, Cool, Medium or Natural.
a. Method: 2 points
Pattern: Inner, Outer
Contrast Red/Green/Blue, Brightness Red/Green/Blue:
Adjustable range -50 - +50.
b. Method: 20 point IRE
Pattern: Inner, Outer
Institute of Radio Engineers (IRE) is the unit indicating the size of a
video signal and can be set to 5, 10, 15, ... 100.You can fine-tune for
each setting as shown below.
Luminance: If you set up luminance for 100 IRE, a luminance value
satisfying each gamma is automatically calculated for
each step from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50 - +50.
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors. Allows an
expert to adjust the tint using a test pattern. Six colors (Red/Green/
Blue/Cyan/Magenta/Yellow) can be selectively adjusted without
affecting other colors.
You may not see colors change on a normal picture even after
adjustment.
Chroma Red/Green/Blue/Yellow/Cyan/Magenta,
Tone Red/Green/Blue/Yellow/Cyan, Magenta:
The adjustment range is -30 - +30 each.
Available options may differ depending on the input signal or video mode, etc.
CUSTOMIZING SETTINGS
59
Picture Option
Item
Description
Noise
Removes noises in the picture.
Reduction
MPEG Noise Reduces the noise produced while creating digital video signals.
Reduction
Black Level Compensates the brightness and contrast of a screen to balance with
the black level of the video input.
Real Cinema Provides optimal picture quality for watching a movie.
TruMotion
Makes the picture look smooth by compensating it.
Mode
Smooth The De-Judder value is set to 3.
Clear
The De-Judder value is set to 7.
User
You can set this function manually.
De-Judder: Adjusts the juddering on a screen.
* If the video signal is 60 Hz, TruMotion may not work.
60
CUSTOMIZING SETTINGS
SOUND Settings
1
2
3
Press the SETTINGS button.
SOUND
Use the or button to select SOUND and
press the OK button.
• SoundMode :Standard
• UserEQ
Use the , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
• VolumeMode
• VirtualSurround:Off
• ClearVoiceII:Offꕅ2
• AVSync.:Off
?
• SoundSetting
The available sound settings are described as follows.
Item
Description
Sound Mode Optimizes Laser Display audio to the selected sound mode.
Mode
Standard
Suitable for all types of video.
Music / Cinema / Sets audio optimized for a specific genre.
Sport / Game
Vivid
Delivers distinct voices with rich bass and clear,
high-pitched sounds.
User Setting
Adjusts the volume to a level of your choice using
the User EQ.
User EQ
Allows you to adjust the treble and bass sound.
Sets Sound Mode at User Setting first.
Mode
100 Hz / 300 Hz Sets EQ by manual adjustment of sound bands.
/ 1 kHz / 3 kHz /
10 kHz
Reset
Resets the equalizer value changed by the user.
Volume
Sets the Laser Display volume.
Mode
Virtual
Provides realistic stereo sound.
Surround
Clear Voice II Makes the voice from the Laser Display crisp and clear.
CUSTOMIZING SETTINGS
Item
AV Sync.
Sound
Setting
61
Description
Allows you to manually adjust picture and audio when they are not
synced.
Balances the sound.
Mode
ARC Mode
External audio devices can be connected via
High-Speed HDMIⓇ cable without an extra optical
audio cable to output SPDIF. It interfaces with
SIMPLINK.
For an external device that supports ARC (Audio
Return Channel), connect it to the HDMI(ARC)
port.
Balance
Adjusts left/right audio balance.
Laser Display
When listening via speakers on external audio
Speaker
devices connected to the Laser display, such
as home theatre equipment, the Laser display
speaker may be turned off. If there is a home
theatre device connected to SIMPLINK, setting
the Laser display Speaker to Off will turn the home
theatre equipment on automatically.
Digital Sound
Sets up Digital Sound Output.
Out
LG Sound Sync Provide the optimized sound with LG audio device
(Optical)
and optical cable.
62
CUSTOMIZING SETTINGS
TIME Settings
1
2
3
Press the SETTINGS button.
TIME
Use the or button to select TIME and
press the OK button.
• SleepTimer
Use the , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
:Off
• AutoOff
:60min.
• AutomaticStandby
:4hours
?
The available time settings are described as follows.
Item
Description
Sleep Timer
Auto Off
Sets the Laser Display to be turned off at the specified time.
If there is no signal, the Laser Display automatically turns off after the
preset time has elapsed.
Turn off the Laser Display at the preset time if there is no input within
the given period of time.
Automatic
Standby
CUSTOMIZING SETTINGS
63
OPTION Settings
1
2
3
Press the SETTINGS button.
OPTION
Use the or button to select OPTION and
press the OK button.
︿
• Language
• Caption
Use the , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
:Off
• Pointer
• SetID
:1
• PJTMode
:Front
• EdgeAdj
• BlankImage
?
:Blue
﹀
The available option settings are described as follows.
Item
Language
Caption
Description
Selects the desired language.
If the language for the AV input is set to Korean, captions can be
turned on or off.
Pointer
Customizes the pointer settings.
Speed
Sets the move speed of a pointer.
Shape
Selects the pointer shape.
Size
Selects the pointer size.
Alignment Turn on this option. While using the Magic remote
control, if the pointing position of the remote control
and the actual pointer position do not match, shake the
Magic remote control to the left and right.
The pointer automatically moves to the center of screen
to match the movement.
Set ID
The range of the set ID is 1 - 99.
Only the saved set ID takes effect.
PJT Mode
Turns the projected image upside down or flips it horizontally.
Edge Adj
Compensates for the trapezoidal image shape created when
projecting an image from an angle not perpendicular to the screen.
Blank Image Selects the background for blank image.
Auto Power Makes the Laser Display turn on automatically when the power cord is
connected.
Item
On
When the power cord is connected to the Laser Display,
it turns on automatically.
Off
When the power cord is connected to the Laser Display,
it goes into standby mode.
Power
The alert sound plays upon turning on/off the power.
Sound
64
CUSTOMIZING SETTINGS
Item
Description
High Altitude If the Laser Display is used at an altitude higher than 1200 meters,
turn this option on.
When High Altitude is not enabled, the Laser Display may overheat or
its protection function may be activated. If this happens, turn the Laser
Display off and then on again after waiting for several minutes.
Test Pattern You can run this option when installing the Laser Display to adjust the
screen size and focus.
NOTE
• While you use the Test Pattern option, the keys on the control
panel do not work.
Auto Input
Search
Automatically searches for and displays the input signal type when it is
received. It is available only with external inputs (RGB, HDMI, AV and
Component).
CUSTOMIZING SETTINGS
Item
Eye Care
Sensor
Description
Change the eye care sensor settings.
NOTE
• If a user gets closer to the product while the eye care sensor is
turned on, the sensor detects it and reduces the light intensity
automatically to protect the user's eyes.
• The eye care sensor does not work when the test pattern or
the Edge Adj function is used.
• The eye care sensor may not work properly if the sensor is
blocked by an object or placed in an area where direct sunlight
or wind comes in contact with it.
• The eye care sensor is more sensitive to horizontal movement
than vertical movement.
• The detection range may vary depending on the installation
environment, temperature, or brightness.
• The eye care sensor detects heat sources, so it may respond
to animals moving or heaters placed close by.
• The eye care sensor detects heat sources, so it may not be
able to detect the user if there is no exposed skin or if an
obstacle is placed between the sensor and the user.
• It may not be able to detect the user if there is no movement
for a long time.
• The eye care sensor may also detect a small animal (e.g. cat
or dog) or rotating heater.
• The eye care sensor may not be able to detect when room
temperature rises to skin temperature (30 ℃ or more in
summer) or when a user is wearing thick clothes or standing
with their back to the sensor.
• The detection area may change if curtains or plants move in
the wind. Detection also depends on variable conditions such
as clothing and temperature.
• The eye care sensor works normally even if the product is
wobbling.
• A wired/wireless communication device may cause the sensor
to malfunction.
• The eye care sensor may not work for a maximum of one
minute after it is turned on.
• When a user moves away from the unit, the light intensity is
recovered within three seconds.
• The eye care sensor may be disabled momentarily when
energy saving option is changed.
65
66
CUSTOMIZING SETTINGS
Item
Eye Care
Sensor
Description
Item
Sensor
Sensitivity
Turn the eye care sensor on/off.
Set the sensitivity of the eye care sensor.
The default is medium, but set it higher for better
sensitivity or lower for less sensitivity.
Balloon Help Enables/disables the balloon help.
Initial
Resets all the Laser Display settings to the factory settings.
Setting
NETWORK Settings
1
2
3
Press the SETTINGS button.
NETWORK
Use the or button to select NETWORK
and press the OK button.
• NetworkConnection
• NetworkStatus
Use the , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
• Wi-FiScreenShare
• SmartShareSetting
• MagicalMirroring
?
The available network settings are described as follows.
Item
Network
Connection
Network
status
Wi-Fi Screen
Share
Description
Connects the network.
Checks the network status.
Wi-Fi Screen Share supports the wired/wireless connection
technology, such as Wi-Fi Direct and WiDi. You can share the file and
screen of the devices connected by the Wi-Fi Screen Share on the
SmartShare.
CUSTOMIZING SETTINGS
Item
67
Description
Smart Share Changes the settings for SmartShare.
Setting
Item
Laser
Changes the name that appears when searching for
Display
the Laser Display from other devices.
Name
Share
Allows / prevents connection to the Laser Display from
My Laser
other devices. Turns DMR (Digital Media Renderer)
Display
connection on/off.
Auto Play on Accepts / rejects content transferred from other
Recieve
devices.
DivX(R) VOD Registers or releases DivX.
Checks DivX Registration Code for playing DivXprotected videos. Register at http://vod.divx.com.
Uses Registration Code to rent or purchase movies at
www.divx.com/vod.
• Rented/purchased DivX files cannot be played if
the DivX Registration Code of a different device
is used. Use only the DivX Registration Code
granted to this device.
• Converted files not conforming to the DivX Codec
Standard may not play or may produce abnormal
images and sound.
Magical
Transmits wirelessly and projects the screen of a network-connected
Mirroring
laptop (PC) to a Laser Display.
68
CONNECTING EXTERNAL DEVICES
CONNECTING EXTERNAL DEVICES
You can connect various external devices to Laser Display.
Computer/Laptop
DVD
Video
Digital Device
USB
Headphones
HDMI - Page 69
Component - Page 72
Input(AV) - Page 72
RGB - Page 70
USB Devices - Page 39
Headphones - Page 73
Game Console
CONNECTING EXTERNAL DEVICES
69
Connecting an HD
Receiver, DVD Player,
or VCR
Connect an HD receiver, DVD, or VCR
player to Laser Display and select an
appropriate input mode.
NOTE
• Audio Return Channel (ARC)
• An external audio device that
supports SIMPLINK and ARC must
be connected using HDMI input 1
(ARC) port.
• When connected with a highspeed HDMIⓇ cable, the external
audio device supporting ARC
outputs optical SPDIF works with
the SimpLink function without
additional optical audio cable.
HDMI connection
With an HDMI cable, you can enjoy high
quality picture and sound. Connect the
HDMI input port of Laser Display to the
HDMI output port.
Press the INPUT button on the remote
control to select HDMI. You can use any
HDMI input port for connection.
RS-232C IN
+'0,
70
CONNECTING EXTERNAL DEVICES
HDMI to DVI Connection
Use the HDMI to DVI cable to connect
the HDMI input port of the Laser Display
to the DVI output port.
Press the INPUT button on the remote
control to select HDMI. You can select
any HDMI input port for connection.
Connecting a PC
This Laser Display supports the Plug &
Play function. Your PC will automatically
detect the Laser Display and requires no
driver installation.
RGB Connection
Connect the PC output and the PC video
input port of the Laser Display with an
RGB cable.
Connect the Laser Display's video (PC)
input port to the RGB output port.
To output the audio, connect the PC
to the Laser Display using an optional
audio cable.
RS-232C IN
RS-232C IN
RS-232C IN
DVI OUT
AUDIO OUT
RGB OUT (PC)
AUDIO OUT
CONNECTING EXTERNAL DEVICES
71
HDMI to DVI Connection
RGB to DVI Connection
Use the HDMI to DVI cable to connect
the HDMI input port of the Laser Display
to the DVI output port.
Press the INPUT button on the remote
control to select HDMI. You can use any
HDMI input port for connection.
Connect the Laser Display's video (PC)
input port to the DVI output port.
To output the audio, connect the PC
to the Laser Display using an optional
audio cable.
RS-232C IN
RS-232C IN
RS-232C IN
DVI OUT
AUDIO OUT
DVI OUT
AUDIO OUT
72
CONNECTING EXTERNAL DEVICES
Connecting External
Devices
Component
Connection
AV Connection
Connect the output ports of an external
device and the AV input ports of the
Laser Display using AV connection
cables. Press the INPUT button to select
AV.
You can enjoy more vivid images when
you connect an external device with a
component port to the component input
port of the Laser Display. Press the
INPUT button on the remote control to
select Component.
The output jack Y, PB or PR of the DVD
player may be marked as Y, B-Y, R-Y/Y,
Cb, Cr/Y, Pb or Pr depending on the
model.
Red
White
Yellow
RS-2
RS-232C IN
Red
White
Red
Blue
Green
/HIW
Red
White
Yellow
$9287
5LJKW
$8',2287
/HIW
Red
35
White
3%
$9287
Red
Blue
Green
<
5LJKW
$8',2287
CONNECTING EXTERNAL DEVICES
Connecting
Headphones
Connecting a Laptop
Headphone Connection
RGB Connection
You can listen to the sound from Laser
Display using headphones.
You can connect the Laser Display to a
laptop to use various functions.
You can connect it to the video (PC)
input port of the Laser Display.
RS-232C IN
RS-232C IN
73
74
CONNECTING EXTERNAL DEVICES
HDMI connection
Connect the HDMI input port of Laser
Display to the HDMI output port.
RS-232C IN
The table below shows examples
of switching the output. For more
information, refer to the "External
Output", "Connecting to an External
Monitor", or similar sections of the
owner's manual of your computer.
Brand
Switching Output
NEC
[Fn]+[F3]
Panasonic
[Fn]+[F3]
Toshiba
[Fn]+[F5]
IBM
[Fn]+[F7]
Sony
[Fn]+[F7]
Fujitsu
[Fn]+[F10]
LG
[Fn]+[F7]
Samsung
[Fn]+[F4]
Macintosh
Adjust the control panel
to enable mirroring after
start-up.
75
CONNECTING EXTERNAL DEVICES
Using the TRIGGER
Port
Motor screen connection
Connect an external device (e.g., roll
screen) to the TRIGGER (12V) port
USB 입력1
using a mini jack cable (3.5 mm).
타임머신 Ready
3(PC)
안테나/케이블 입력
이어폰
영상
2
1(ARC)
HDMI 입력
좌(모노)-음성-우
외부
입력
TRIGGER
(12V)
컴포넌트
입력
우
좌
영상
음성
광디지털
음성출력
서비스 전용
USB 입력1
타임머신 Ready
3(PC)
안테나/케이블 입력
이어폰
영상
좌(모노)-음성-우
외부
입력
TRIGGER
(12V)
컴포넌트
입력
우
좌
영상
2
HDMI 입력
음성
광디지털
음성출력
서비스 전용
NOTE
• Do not plug an earphone jack into the TRIGGER (12V) port. This may cause
damage to the earphones.
• When a device is connected to the TRIGGER port, turning the power on outputs
voltage from the port; turning the power off stops outputting.
1(ARC)
76
SERIAL COMMUNICATION FUNCTION
SERIAL COMMUNICATION FUNCTION
Using Serial Communication
If the Laser Display is connected to a PC through an RS-232C cable, you can use the
PC to control functions of the Laser Display such as power On/Off or input selection,
etc.
This function may not be available for a particular menu or input mode.
Establishing Serial Communication
Connect the RS-232C (serial connector) of the PC to the RS-232C connector at the
back of the Laser Display.
You need to purchase a cable to connect the RS-232C connectors as it is not provided
as an accessory.
* A RS-232C cable is necessary for the remote control of the Laser Display (see Figure 1).
Laser
(Laser
Display)
(PC)
PC
Display
RS-232C IN
[Figure 1] RS-232 Connection Diagram
RXD
TXD
DTR
GND
DSR
RTS
CTS
2
3
4
5
6
7
8
2
3
4
5
6
7
8
RXD
TXD
DTR
GND
DSR
RTS
CTS
PC
Laser Display
* There is no connection to Pin 1 and Pin 9.
9
5
6
1
77
SERIAL COMMUNICATION FUNCTION
2. OK Acknowledgement
Communication Parameter Setup
Baud Rate: 9600 bps(UART)
Data Length: 8 bit
Parity: none
Stop bit: 1 bit
Flow Control: none
Communication code: ASCII code
[Command2] [ ] [Set ID] [ ] [OK] [Data] [x]
* The set transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates
present status data. If the data is data write mode, it
returns the data of the PC computer.
Communication
Protocol
3. Error Acknowledgement
[Command2] [ ] [Set ID] [ ] [NG] [Data] [x]
1. Transmission
If a set receives an abnormal piece of data
such as a non-supported function or there is a
communication error, it returns ACK in the above
format.
Data [00]: illegal code
(This command is not supported.)
[Command1] [Command2] [ ] [Set ID] [ ]
[Data] [Cr]
[Command1]: The first command to control the
Laser Display (k. j, x, m, n, ASCII
code, 1 Character)
[Command2]: The second command to control
the Laser Display (ASCII code, 1
character)
[Set ID]: You can adjust the set ID to choose
desired monitor ID number in option
menu. Adjustment range is 1 to 99. When
selecting Set ID ‘0’, every connected set is
controlled. Set ID is indicated as decimal (1
to 99) on menu and as Hexa decimal (0x0
to 0x63) on transmission/receiving protocol.
[Data]: To transmit command data (hexadecimal).
Transmit ‘FF’ data to read status of
command.
[Cr]: Carriage Return
It corresponds to ASCII code ‘0x0D’.
[ ] : ASCII code ‘space (0x20)
Data Structure
10
16
0
00
1
01
2
02
3
03
4
04
5
10
16
10
16
10
16
10
16
10
16
10
16
10
16
10
16
10
11
0B
21
15
31
1F
12
0C
22
16
32
20
13
0D
23
17
33
21
14
0E
24
18
34
22
05
15
0F
25
19
35
6
06
16
10
26
1A
7
07
17
11
27
8
08
18
12
9
09
19
10
0A
20
16
41
29
51
33
61
3D
71
47
81
51
91
5B
42
2A
52
34
62
3E
72
48
82
52
92
5C
43
2B
53
35
63
3F
73
49
83
53
93
5D
44
2C
54
36
64
40
74
4A
84
54
94
5E
23
45
2D
55
37
65
41
75
4B
85
55
95
5F
36
24
46
2E
56
38
66
42
76
4C
86
56
96
60
1B
37
25
47
2F
57
39
67
43
77
4D
87
57
97
61
28
1C
38
26
48
30
58
3A
68
44
78
4E
88
58
98
62
13
29
1D
39
27
49
31
59
3B
69
45
79
4F
89
59
99
63
14
30
1E
40
28
50
32
60
3C
70
46
80
50
90
5A
100
64
78
SERIAL COMMUNICATION FUNCTION
Command Reference List
Command 1
Command 2
Data (Hexadecimal)
01. POWER
k
a
00 - 01
02. Aspect Ratio
k
c
*
03. Blank Image
k
d
00 - 01
04. Contrast
k
g
00 - 64
05. Brightness
k
h
00 - 64
06. Color
k
i
00 - 64
07. Tint
k
j
00 - 64
08. Sharpness
k
k
00 - 32
09. OSD Control
k
l
00 - 01
10. Key Lock
k
m
00 - 01
11. Color Temperature
k
u
00 - 04 (excluding 03)
12. Black Level
n
m
00 - 01
13. Energy Saving
n
p
00 - 02
14. Auto configuration
j
u
01
15. Input
x
b
*
16. Key
m
c
Key Code
17. Picture Mode
n
s
00 - 05
18. Mute
k
e
00 - 01
19. Volume
k
f
00 - 64
* For more information about the data(*), refer to next page.
* When playing a video or photo file stored on a storage media (USB memory stick or
HDD, etc.) that is connected through USB, all commands are disabled, other than
Power (ka), Key (mc) and Blank Image. If a command cannot be used in a specific
menu or input state, it is processed as NG.
SERIAL COMMUNICATION FUNCTION
01. Power (Command: ka)
02. Aspect Ratio (Command: kc)
⇒ Powers the set on/off.
⇒ Adjusts the aspect ratio.
Transmission
Transmission
[k][a][][Set ID][][Data][Cr]
[k][c][][Set ID][][Data][Cr]
Data
Data
00: Power Off
01: Power On
02: 16:9
04: Zoom
Ack
06: Set By Program
09: Just scan
[a][][Set ID][][OK][Data][x]
Data
01: 4:3
00: Power Off
01: Power On
⇒T
o Show Power On (Only working when
the Laser display is turned on)
Transmission
10 - 1f: Cinema Zoom 1 - 16
Ack
[c][] [Set ID][][OK][Data][x]
Data
01: 4:3
02: 16:9
04: Zoom
[k][a][][Set ID][][FF][Cr]
06: Set By Program
09: Just scan
Ack
10 - 1f: Cinema Zoom 1 - 16
[a][] [Set ID][][OK][Data][x]
Data
01: Power On
⇒ As with other functions, if data is
transmitted as ‘0xFF‘ in the above format, the
current status of each function is returned as
a feedback in Ack data.
03. Blank Image (Command: kd)
⇒ Enables/disables the blank image.
Transmission
[k][d][][Set ID][Data][Cr]
Data 00: Screen Mute Off (picture on)
01: Screen Mute On (picture off)
Ack
[d][][Set ID][][OK][Data][x]
Data 00: Screen Mute Off (picture on)
01: Screen Mute On (picture off)
79
80
SERIAL COMMUNICATION FUNCTION
04. Contrast (Command: kg)
06. Color (Command: ki)
⇒ Adjusts the screen contrast.
⇒ Adjusts the screen color.
Transmission
Transmission
[k][g][][Set ID][][Data][Cr]
[k][i][][Set ID][][Data][Cr]
Data
Data
Min: 0H - Max: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
Min: 0H - Max: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
[g][][Set ID][][OK][Data][x]
[i][][Set ID][][OK][Data][x]
Data
Data Min: 0H - Max: 64H
Min: 0H - Max: 64H
05. Brightness (Command: kh)
07. Tint (Command: kj)
⇒ Adjusts the screen brightness.
⇒ Adjusts the screen tint.
Transmission
Transmission
[k][h][][Set ID][][Data][Cr]
[k][j][][Set ID][][Data][Cr]
Data
Data
Min: 0H - Max: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
Red: 0H - Green: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
[h][] [Set ID][][OK][Data][x]
[j][][Set ID][][OK][Data][x]
Data
Data
Min: 0H - Max: 64H
Red: 0H - Green: 64H
SERIAL COMMUNICATION FUNCTION
08. Sharpness (Command: kk)
⇒ Adjusts screen sharpness.
Transmission
[k][k][][Set ID][][Data][Cr]
Data
Min: 0H - Max: 32H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
10. Key Lock (Command: km)
⇒ To Set the function of locking the remote
control and front panel control on the Laser
Display.
Transmission
[k][m][][Set ID][][Data][Cr]
Data 00: Disables the key lock.
01: Enables the key lock.
Ack
[k][][Set ID][][OK][Data][x]
Data
81
[m][] [Set ID][][OK][Data][x]
Min: 0H - Max: 32H
Data 00: Disables the key lock.
01: Enables the key lock.
09. OSD Control (Command: kl)
⇒ Selects OSD On/Off.
Transmission
►► This function is configured when the keys on the
remote control or control panel are not used. If
the unit is fully discharged after its power plug
is pulled out of a wall outlet, the LOCK function
is cleared.
►► If the unit is in the key lock standby mode, the
Laser Display will not respond to the power
button on the remote control or control panel.
[k][l][][Set ID][][Data][Cr]
Data 00: OSD selection mode off
01: OSD selection mode on
Ack
[l][][Set ID][][OK][Data][x]
11. Color Temperature
(Command: ku)
⇒ Adjusts the value of color temperature.
Transmission
[k][u][][Set ID][][Data][Cr]
Data 00: OSD selection mode off
01: OSD selection mode on
Data 00: Medium
02: Warm
01: Cool
04: Medium
(* Transmitted in hexadecimal code)
*Data 03 is not used.
Ack
[u][][Set ID][][OK][Data][x]
Data 00: Medium
02: Warm
01: Cool
04: Medium
82
SERIAL COMMUNICATION FUNCTION
12. Black Level (Command: nm)
⇒ Adjusts the value of black level.
Transmission
⇒ Optimizes the screen automatically in PC
input mode.
Transmission
[n][m][][Set ID][][Data][Cr]
Data 00: Low
14. Auto Configure (Command: ju)
[j][u][][Set ID][][Data][Cr]
01: High
(* Transmitted in hexadecimal code)
Data
01: To set
(* Transmitted in hexadecimal code)
Ack
Ack
[m][][Set ID][][OK][Data][x]
Data 00: Low
[u][] [Set ID][][OK][Data][x]
01: High
Data
01: To set
15. Input Select (Command: xb)
13. Energy Saving (Command: np)
⇒ Sets the energy saving mode.
Transmission
[n][p][][Set ID][][Data][Cr]
Data
00: Minimum
Data
01: Medium
Data
02: Maximum
(* Transmitted in hexadecimal code)
Ack
⇒ Selects the input signal.
Transmission
[x][b][][Set ID][][Data][Cr]
Data
20: AV
40: Component
60: RGB-PC
90: HDMI 1
91: HDMI 2
92: HDMI 3
(* Transmitted in hexadecimal code)
Ack
[b][] [Set ID][][OK][Data][x]
[p][] [Set ID][][OK][Data][x]
Data
00: Minimum
Data
01: Medium
Data
02: Maximum
Data
20: AV
40: Component
60: RGB-PC
90: HDMI 1
91: HDMI 2
92: HDMI 3
SERIAL COMMUNICATION FUNCTION
16. Key (Command: mc)
18. Mute (Command: ke)
⇒ Sends a key code of the IR remote control.
⇒ Enables/disables the mute function.
Transmission
Transmission
[k][e][][Set ID][][Data][Cr]
[m][c][][Set ID][][Data][Cr]
Data Key Code See Page 84
(* Transmitted in hexadecimal code)
Ack
[c][] [Set ID][][OK][Data][x]
Data Key Code
Data 00: Mute On (volume off)
01: Mute Off (volume on)
Ack
[e][] [Set ID][][OK][Data][x]
Data 00: Mute On (volume off)
01: Mute Off (volume on)
17. Picture Mode (Command: ns)
⇒ Sets the picture mode.
19. Volume (Command: kf)
Transmission
⇒ Controls the volume.
[n][s][][Set ID][][Data][Cr]
Transmission
Data
00: Vivid
01: Standard
02: Cinema
03: Game
[k][f][][Set ID][][Data][Cr]
04: Expert1
05: Expert2
Data Min: 0H (Vol 0) - Max: 64H (Vol 100)
(* Transmitted in hexadecimal code)
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
[b][] [Set ID][][OK][Data][x]
Ack
[f][] [Set ID][][OK][Data][x]
Data
00: Vivid
01: Standard
02: Cinema
03: Game
04: Expert1
05: Expert2
(* Transmitted in hexadecimal code)
Data
Min: 0H (Vol 0) - Max: 64H (Vol 100)
83
84
SERIAL COMMUNICATION FUNCTION
<Key Code>
Key Name
Key Code
Key Name
Key Code
∧
0x40
USB
0x7C
∨
0x41
MUTE
0x09
>
0x06
PAGE ∧
0x00
<
0x07
PAGE ∨
0x01
POWER
0x08
STILL
0xBC
INPUT
0x0B
EXIT
0x5B
SETTINGS
0x43
0
0x10
(BACK)
0x28
1
0x11
OK
0x44
2
0x12
ENERGY SAVING
0x95
3
0x13
RATIO
0x79
4
0x14
BLANK
0x84
5
0x15
AUTO
0x92
6
0x16
AV MODE
0x30
7
0x17
VOL+
0x02
8
0x18
VOL -
0x03
9
0x19
RED
0x72
ꕙ
0x8E
GREEN
0x71
ꕚ
0x8F
YELLOW
0x63
▶
0xB0
BLUE
0x61
ꕗ
0xB1
SIMPLINK
0x7E
ꕘ
0xBA
EDGE ADJ
0xA4
SLEEP
0x0E
Q.MENU
0x45
HELP
0x81
MAINTENANCE
MAINTENANCE
Clean your Laser Display to keep it in
optimal condition.
Cleaning
Cleaning Cover Glass
To remove dust or stains on the cover
glass, use an air spray or use a swab or
soft cloth to wipe the glass gently.
Cleaning the Laser Display
Case
To clean the case of Laser Display, first
unplug the power cord.
To remove dust or stains, use only a dry,
lint-free, soft cloth to polish the lens.
Do not use alcohol, benzene, thinners
or other chemicals, which may damage
the case.
85
86
MAINTENANCE
Updating the Software
When a software update is required, run the software update to obtain the latest
software version.
You can manually check for and download any software updates.
1
2
Press the SETTINGS button.
Select SUPPORT and go to Software Update.
Item
Description
Software Update
Turn on this option.
When an update file is found, it is downloaded automatically.
When the update file is completely downloaded, a software
update window appears.
Check Update
Version
Product/Service Info
Self Diagnosis
If an update file of a higher version exists after checking
the latest update version, you can proceed with the update
manually.
Shows the product related information.
Performs the self-diagnosis function. This function suggests
corrective actions for the problems that might occur while
using this product.
• The update service to get the latest version is provided through an Internet
connection.
• If the software is not updated, some functions may not work well.
SPECIFICATIONS
87
SPECIFICATIONS
MODELS
Resolution (Pixel)
Aspect ratio
Panel size (mm)
Projection distance
(Video size)
Ratio of upward
projection
POWER
Audio output
Video input
Height (mm)
Width (mm)
Depth (mm)
Weight (kg)
USB Device
Operation
environment
HECTO (HECTO-GL)
1920 (Horizontal) × 1080 (Vertical)
16:9 (Horizontal:Vertical)
14.515 (Horizontal), 8.1648 (Vertical)
0.53 m (2.54 m)
123 %
AC 100 - 240 V, 50/60 Hz
10 W + 10 W
NTSC M / PAL-B, D, G, H, I / PAL M / PAL N / PAL 60 / SECAM
145 (excluding foot), 156.1 (including foot)
546.3
406.6
14
5 V, 0.5 A (Max.)
Temperature
Operation
0 °C - 40 °C
Storage
-20 °C - 60 °C
Relative humidity
Operation
0 % - 80 %
Storage
0 % - 85 %
88
SPECIFICATIONS
Supported Monitor Display
Supported HDMI/DVI-DTV Mode
Horizontal
Vertical
Resolution Frequency Frequency
(kHz)
(Hz)
720 x 400
31.469
70.08
640 x 480
31.469
59.94
800 x 600
37.879
60.31
1024 x 768
48.363
60.00
1152 x 864
54.348
60.053
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.02
1920 x 1080
67.5
60
• If an invalid signal is input into the
product, it will not be displayed
properly on the screen or a message
such as “No Signal” or “Invalid Mode”
will be displayed.
• The product supports the DDC1/2B
type as the Plug & Play function
(Auto-recognition of PC monitor).
• PC synchronization signal
types supported: Separate type
synchronization.
• 1920 x 1080 is recommended as the
best picture quality in the PC mode.
Horizontal
Vertical
Resolution Frequency Frequency
(kHz)
(Hz)
31.5
60
31.469
59.94
576p
31.25
50
37.5
50
720p
44.96
59.94
45
60
28.125
50
33.716
59.94
33.75
60
56.25
50
67.432
59.94
67.5
60
67.432
59.939
27
24
26.97
23.976
28.125
25
480p
1080i
1080p
33.75
30
33.71
29.97
SPECIFICATIONS
Component Port Connection
Signal
Component
480i / 576i
o
480p / 576p
o
720p/1080i
o
1080p
o
89
Open Source software Information
To obtain the source code under GPL,
LGPL, MPL and other open source
licenses, that is contained in this
product,
please visit http://opensource.lge.com .
In addition to the source code, all
referred license terms, warranty
disclaimers and copyright notices are
available for download.
LG Electronics will also provide open
source code to you on CD-ROM for a
charge covering the cost of performing
such distribution (such as the cost of
media, shipping and handling) upon
email request to opensource@lge.com.
This offer is valid for three (3) years from
the date on which you purchased the
product.
The model and serial number of the Laser
Display are located on the back or on the
side of the Laser Display. Record them
below should you ever need service.
MODEL
SERIAL
Download PDF