LG | PF1000U | LG PF1000U Owner’s Manual

Owner's Manual
LG CineBeam
DLP Projector
Please read the safety information carefully before using this product.
PF1000U
www.lg.com
P/NO : SAC37034640 (1806-REV04)
Copyright ⓒ 2017 LG Electronics Inc. All Rights Reserved.
2
LICENSES
LICENSES
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
This DivX Certified® device has passed
rigorous testing to ensure it plays DivX®
video.
To play purchased DivX movies, first register
your device at vod.divx.com. Find your
registration code in the DivX VOD section of
your device setup menu.
DivX Certified® to play DivX® video up to HD
1080p, including premium content.
DivX®, DivX Certified® and associated logos
are trademarks of DivX, LLC and are used
under license.
Covered by DivX Patents 7,295,673;
7,515,710; RE45,052; and others available at
[www.divx.com/patents]
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.

NOTE
• Image shown may differ from your projector.
• Your projector’s OSD (On Screen Display) may differ slightly from
that shown in this manual.
SAFETY PRECAUTIONS
3
SAFETY PRECAUTIONS
Please take note of the safety instructions to prevent any potential accident
or misuse of the projector.
• Safety precautions are given in two forms, i.e., WARNING and
CAUTION as detailed below.
WARNING Failure to follow the instructions may cause serious
injury and even death.
CAUTION Failure to follow the instructions may cause personal
injury or product damage.
• Read the owner's manual carefully and keep it on hand.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol,
within an equilateral
triangle, is intended to alert the
user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point
within an equilateral
triangle is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING/CAUTION
-- TO REDUCE THE RISK
OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR
MOISTURE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Indoor Installation
WARNING
• Do not use the projector outside
and do not expose the product
to any humidity or water.
--Since the product is not
waterproof, this may result in
a fire or electric shock.
• Do not place the projector in
direct sunlight or near heat
sources such as radiators, fires,
stoves, etc.
--This may result in fire.
• Do not place flammable
materials such as aerosols near
the projector.
--This may result in fire.
• Do not allow children to cling to
or climb up to the projector.
--This may cause the projector
to fall, causing injury or
death.
4
SAFETY PRECAUTIONS
• Do not install the product in a
place with no ventilation (e.g.,
on a bookshelf or in a closet) or
on a carpet or cushion.
--This may result in fire due
to the increase in internal
temperature.
• Do not place the product close
to sources of steam, oil, or oil
mist, such as humidifiers and
kitchen counters.
--Failure to do so may result
in fire, electric shock, or
corrosion.
• Do not install the product onto
a wall or ceiling that is close to
sources of oil or oil mist.
--The product may be
damaged and fall, resulting in
serious injury.
• Do not place the projector where
it might be exposed to dust.
--This may result in fire.
• Do not use the projector in a
damp place such as a bathroom
where it is likely to get wet.
--This may result in fire or
electric shock.
• Do not allow a tablecloth or
curtain to block the air vent.
--This may result in fire due to
the increase in the internal
temperature.
• Ensure good ventilation around
the projector. The distance
between the projector and the
wall should be at least 30 cm.
--This will prevent fire due to
the increase in the internal
temperature.
CAUTION
• When placing the projector on a
table or shelf, be careful not to
put it near the edge.
--The projector could fall due
to balance problems, which
may cause personal injury or
damage to the product. Make
sure to use the projector
cabinet or stand that fits the
projector.
• When moving the projector,
make sure to switch it off and
remove the power plug and
cords.
--The power cord may be
damaged, resulting in fire or
electric shock.
• Do not place the projector on
an unstable or vibrating surface
such as a wobbly shelf or a
slope.
--It may fall and cause injury.
• Be careful not to tip the projector
over when connecting external
devices to the projector.
--This may cause personal
injury or damage to the
projector.
SAFETY PRECAUTIONS
Power
WARNING
• The appliance coupler is used
as the disconnect device.
--Please make sure the device
is installed near the wall
outlet to which it is connected
and that the outlet is easily
accessible.
• The grounding wire should be
connected.
--Ensure that you connect the
grounding cable to avoid
electric shock. If it is not
possible to ground the unit,
have a qualified electrician
install a separate circuit
breaker.
Do not try to ground the
projector by connecting it to
telephone wires, lightning
rods, or gas pipes.
• The power plug should be
inserted fully into the power
outlet.
--An unstable connection may
cause a fire.
• Do not place heavy objects on
the power cord.
--This may result in fire or
electric shock.
• Never touch the power plug with
wet hands.
--This may result in electric
shock.
• Do not plug too many devices
into one multi-power outlet.
--This may result in fire due to
the power outlet overheating.
5
• Keep the AC adapter, power
plug, and the used power outlet
clean from dust or foreign
materials building up.
--This may result in fire.
• If there is any smoke or a
burning smell from the projector
or AC adapter, stop using the
product immediately. Disconnect
the power cord from the power
outlet, and then contact the
customer service centre.
--This may result in fire.
CAUTION
• Always grab the plug to remove
the AC adapter or power cord.
--Otherwise, this may result
in a fire or may damage the
product.
• Hold the plug firmly when
unplugging.
--A damaged wire may create
a fire hazard.
• Refrain from constantly bending
the power cord of the AC
adapter.
--If the power cord is bent
excessively for a long period
of time, the cord may break
inside. This may result in a
fire or electric shock.
• Ensure the power cord and plug
are not damaged, modified,
severely bent, twisted, pulled,
sandwiched, or hot. Do not use
the product if the power outlet
is loose.
--This may result in fire or
electric shock.
6
SAFETY PRECAUTIONS
• Keep the power cord away from
heating devices.
--The wire's sheath may melt,
which may result in fire or
electric shock.
• Place the projector where
people will not trip over or step
on the power cord to protect the
power cord and plug from any
damage.
--This may result in fire or
electric shock.
• Do not turn the projector on or
off by plugging in the power plug
or unplugging it from the power
outlet. (Do not use the power
plug as a switch.)
--This may result in electric
shock or damage to the
product.
• Do not insert a conductor
into the other side of the wall
outlet while the power plug is
inserted into the wall outlet.
In addition, do not touch the
power plug immediately after it
is disconnected from the wall
outlet.
--This may result in electric
shock.
• Only use the official power cord
provided by LG Electronics. Do
not use other power cords.
--This may result in fire or
electric shock.
• If any water or foreign materials
have gone into the AC adapter,
power cord, or the interior of the
projector, turn off the projector
by pressing the power button.
Remove all the cables, and then
contact the customer service
centre.
--This may result in fire or
electric shock.
• The surface of the AC adapter is
hot. Keep the AC adapter out of
the reach of children and avoid
touching it during use.
• Never disassemble the power
supply devices (AC adapter/
power cord, etc.).
--This may damage the power
cord and result in a fire or
electric shock.
• Connect the AC adapter and the
power cord firmly.
--Not doing so may result in a
product failure or fire.
• Do not place heavy objects
or put pressure on the power
cord and AC adapter and avoid
damage.
--This may result in a fire or
may damage the product.
• Always use the AC adapter
provided or any AC adapters
approved and certified by LG
Electronics.
--Any other AC adapter
connected may result in the
screen flickering.
SAFETY PRECAUTIONS
When in Use
WARNING
• Do not place anything containing
liquid on top of the projector
such as a vase, flower pot,
cup, cosmetics, or medicine; or
ornaments, candles, etc.
--This may result in fire or
electric shock, or cause injury
due to falling.
• In the event that there is a
heavy impact or the cabinet is
damaged, switch it off, unplug
it from the power outlet and
contact an authorized service
centre.
--This may result in electric
shock.
• Do not insert pieces of metal
such as coins, hairpins, or metal
debris, nor flammable materials
such as paper or matches into
the projector.
--This is to prevent electric
shock or fire.
• Make sure that a child does
not swallow the batteries when
you replace the old remote
control batteries with new ones.
Keep batteries out of reach of
children.
--If a child swallows a battery,
consult a doctor immediately.
• Never open any cover on the
projector.
--There is a high risk of electric
shock.
7
• Do not look directly into the lens
when the projector is in use.
--The bright light may damage
your eyes.
• When the lamp is on or has just
been turned off, avoid touching
the air vent or lamp, because
these will be very hot.
• If there is a gas leak in the
room with the projector, do not
touch the projector or power
outlet. Open the windows for
ventilation.
--Sparks may cause fire or
burns.
• Unplug the power cord from the
outlet during a lightning storm.
--This will prevent shock or
damage to the projector.
• Do not use the projector near
electronic devices that generate
a strong magnetic field.
• Keep the plastic film used for
packaging the projector out of
the reach of children.
--If not handled safely, it can
cause suffocation.
• Do not keep your hand on the
projector for a long time when it
is running.
• When you play a game by
connecting a game console to
a projector, it is recommended
that you maintain a distance
of more than four times the
diagonal length of the screen.
--Make sure that the
connecting cable is long
enough. Otherwise, the
product may fall causing
personal injury or damage to
the product.
8
SAFETY PRECAUTIONS
• Do not place the projector or its
remote control with battery in
an extremely high temperature
environment.
--This may result in fire.
• Do not use 3D glasses if you do
not watch 3D.
CAUTION
• Do not place heavy objects on
the projector.
--It may fall down and cause
personal injury.
• Be careful not to allow any
impact to the lens during
transport.
• Do not touch the lens of the
projector.
--The lens may be damaged.
• Do not use any sharp tools on
the projector such as a knife
or hammer, because this may
damage the casing.
• In the event that no image
appears on the screen or no
sound is heard, stop using
the projector. Switch off the
projector, unplug it from the
power outlet and contact our
service centre.
--This may result in fire or
electric shock.
• Do not drop anything onto the
projector or allow anything to
bang into the projector.
--This may cause damage
to the projector or personal
injury.
• It is recommended that you
maintain a distance of at least
5-7 times the diagonal length of
the screen.
--If you watch the screen at
a close distance for a long
time, you may suffer from
eyestrain.
• Do not block the light beam
emitted from the projector using
a book or other object.
--Lengthy exposure to the
projector beam may result in
fire. In addition, the lens may
be overheated and damaged
by the reflected heat. Disable
the AV function to stop
projection temporarily or turn
off the power.
• Do not start the projector with
the volume turned up high.
--High volume may damage
hearing.
• Do not use high voltage
electrical equipment near the
projector, (e.g., a bug zapper).
This may result in product
malfunction.
SAFETY PRECAUTIONS
Cleaning
WARNING
• Do not spray the projector with
water when cleaning. Make sure
water does not flow into the
projector.
--This may result in fire or
electric shock.
• When there is smoke or a
strange smell coming out from
the projector or a foreign object
falls into the projector, please
switch it off and unplug it from
the power outlet and contact our
service centre.
--Otherwise, this may result in
fire or electric shock.
• Use air spray, a soft cloth, or
a cotton swab moistened with
a lens cleaning chemical or
alcohol to remove dust or stains
on the front projection lens.
CAUTION
• Contact your seller or our
service centre once a year to
clean the internal parts of the
projector.
--If you do not clean the
projector for a long period of
time, dust will accumulate,
which may result in fire or
damage to the projector.
9
• When cleaning plastic parts
such as the projector case,
unplug the power first and wipe
with a soft cloth. Do not spray
with water or wipe with a wet
cloth. Never use glass cleaner,
automobile or industrial polish,
abrasives, wax, benzene, or
alcohol as these can damage
the projector.
--This can result in fire, electric
shock or cause damage to
the product (deformation and
corrosion).
• Do not wipe the optical system
(lens, mirror) right after the
product has been turned off
or while the product is being
operated. When cleaning each
part of the product, remove the
power cord and wipe gently
with a soft cloth. Do not spray
with water or wipe with a wet
cloth. Do not use detergents,
automobile or industrial polish,
abrasive substances, wax,
benzene, alcohol, water, etc. on
the product's main unit or optical
system (lens, mirror) as this may
damage the product.
--This can result in fire, electric
shock or cause damage to
the product (deformation and
corrosion).
• Remove the plug from the outlet
before cleaning the product.
--Otherwise, this may result in
electric shock.
10
SAFETY PRECAUTIONS
Antenna
• If you are using an outdoor
antenna, please install it away
from electrical wires to make
sure it does not touch any
nearby wires even when it falls
down due to heavy wind.
--Failure to do so may cause
electric shock or physical
injury.
• To prevent any raindrops flow
into the product, bend the
outdoor antenna wire where it
comes indoors.
--Raindrops flowing into the
product may cause fire or
electric shock.
Others
WARNING
• Some users may experience
a seizure or other abnormal
symptoms when they are
exposed to a flashing light or
particular patterns from a video
game.
• When you go out, place the
projector out of reach of
animals, and remove the power
plug from the wall outlet.
--Using a damaged power cord
may result in short circuit
or fire.
• Do not use the projector near
high precision electronic devices
or those that transmit weak
radio signals.
--This may affect the operation
of the product, causing an
accident.
• Only a qualified technician
can disassemble or modify
the projector. For diagnosis,
adjustment, or repair, contact
your seller or our service centre.
--This may result in fire or
electric shock.
• No user serviceable parts
inside unit. High voltage parts
can cause shock and even
electrocution.
• Proper ventilation required, do
not block airflow around unit.
Doing so can cause injury and
internal overheating.
• Do not touch the lens; doing so
can result in burns or damage
to lens. Lens and unit may be
HOT during and immediately
after use. Use caution when
handling unit, allowing for proper
cool down.
• Only use a grounded electrical
outlet.
• Do not insert anything into or
cover up the exhaust vents.
--This may result in fire or
electric shock.
• Follow all maintenance
guidelines for optimal use;
service only at an authorized
service centre.
SAFETY PRECAUTIONS
• Keep the batteries and remote
out of reach of children.
--This will prevent personal
injury or damage to the
product.
CAUTION
• Do not mix new batteries with
old ones.
--Burst or leaking batteries
may result in damage or
injury.
• Be sure to unplug if the projector
is not to be used for a long
period.
--Accumulated dust may result
in fire or electric shock due to
overheating, ignition, or poor
insulation.
• Only use the specified type of
battery.
-- Burst or leaking batteries may
result in damage or injury.
• Dispose of used batteries
properly.
--This may result in explosion
or fire. The correct method of
disposal may vary depending
on your country or region.
Dispose of the battery pack
as instructed.
• Do not throw or disassemble the
battery.
--This may result in fire or
explosion due to damage to
the battery.
11
• Store batteries away from
metallic objects, such as keys
and paper clips.
--Excess current may
cause a rapid increase in
temperature, resulting in fire
or burns.
• Do not store the batteries near
any heat source, such as a
heater.
--This may result in fire or
damage to the product.
• Do not store batteries at
temperatures higher than 60 °C
or in high humidity.
--This may result in explosion
or fire.
• Make sure that the battery is
installed correctly.
--This may prevent explosion
or fire.
• Make sure you use the
same type of batteries for
replacement.
• Incorrect battery replacement
may cause fire.

Risk Group 2
CAUTION Possibly hazardous
optical radiation emitted from this
product. Do not stare at operating
lamp. May be harmful to the eye.
12
CONTENTS
CONTENTS
LICENSES
2
USING THE PROJECTOR27
SAFETY PRECAUTIONS 3
Connecting the Antenna or
Cable
27
PREPARATION
14
Accessories
14
Optional Extras
15
Parts and Components
16
--Main Unit
16
--Side17
--Back18
Using the Joystick Button
--Basic Functions
--Adjusting the Menu
19
19
20
Projector Status Indicators 20
Installation
21
--Installation Precautions 21
--Projection Distance per
Screen Size
22
--Kensington Security System
23
REMOTE CONTROL
24
Watching Projector
28
--Turning on the Projector 28
--Focus of the Screen Image28
-- Watching With the Projector29
To Set Programme
30
--Memorizing the Available
Channels30
Additional Options
34
--Adjusting Aspect Ratio
34
--Using the Edge Adj (4 Corner
Keystone) Function
36
--Changing Input Device 37
--Blank Function
38
Using the Quick Menu
39
ENTERTAINMENT
40
Using SCREEN SHARE
40
Setting Up Bluetooth on the
Projector
41
--Searching for Bluetooth
Devices and Connecting 42
--Connecting, Disconnecting,
or Deleting Bluetooth
Devices in the List of
Registered Devices
43
--Adjusting AV Sync. Adjust 44
13
CONTENTS
MY MEDIA
45
CONNECTING DEVICES 94
Before Using
45
--Connecting a USB Device45
--Removing a USB Device 45
Connecting to HD Receiver,
DVD, or VCR Player, External
Devices
95
--HDMI Connection
95
--HDMI to DVI Connection 95
--AV Connection
96
--Component Connection 96
To Use My Media
--Watching the Videos
--Viewing the Photos
--Listening to Music
--Viewing Files
47
50
56
59
62
3D FUNCTION
66
While Watching 3D
66
Connecting a PC
--HDMI Connection
--HDMI to DVI Connection
--RGB Connection
97
97
98
99
Requirements for Watching 3D
Images
69
--Using the DLP-LINK (DLPReady) Type Glasses
70
Connecting a Laptop
--HDMI Connection
100
100
Connecting Headphones
101
To view 3D images
--Supported 3D Mode
Using the Mirroring Function
of a Mobile Phone
103
--MHL Connection
103
70
71
CUSTOMIZING SETTINGS 73
SETTINGS
73
Connecting a Digital Amp 101
MAINTENANCE
104
SETUP Settings
84
Cleaning
104
--Cleaning the Lens
104
--Cleaning the Projector Case
104
TIME Settings
85
WIRELESS Settings
86
SPECIFICATIONS
105
LOCK Settings
87
SYMBOLS
109
OPTION 1 Settings
89
OPTION 2 Settings
92
PICTURE Settings
74
AUDIO Settings
80
14
PREPARATION
PREPARATION
The pictures may differ slightly from the actual product.
Accessories
Accessories included with the projector are show below.
Accessories are subject to change without prior notice.
New accessories may be added or old ones removed.
#-"/,
Remote Control
Two AAA Batteries
Owner's Manual
Power cord
AC-DC Adaptor
Composite Gender
• When connecting an HDMI or USB
cable, or connecting a USB flash drive
to the HDMI or USB port, use a product
that has a width of 18 mm or less and
a height of 10 mm or less. If the USB
cable or USB flash drive does not fit
the USB ports of the projector, use an
extension cable that supports USB 2.0.
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display or a
connection error may occur. (Recommended HDMI cable types)
--High-Speed HDMI®/™ Cable
--High-Speed HDMI®/™ Cable with Ethernet
PREPARATION
15
Optional Extras
To purchase optional accessories, visit an electronics store or online
shopping site or contact the retail store where you purchased the product.
Optional accessories are subject to change without prior notice.
Projection Screen
LG Audio Device
HDMI Cable
Video Cable
Audio Cable
Computer Cable
Optical Cable
MHL Cable
3D glasses
(DLP-LINK or DLP
Ready Type)
RF Cable
Component Gender
16
PREPARATION
Parts and Components
This projector is manufactured using high-precision technology. You may,
however, see tiny black dots and/or bright coloured dots (red, blue, or
green) that continuously appear on the projector screen. This is a normal
result of the manufacturing process and does not indicate a malfunction.
Main Unit
Joystick Button
Mirror2)
Vent1)
Speaker
Vent1)
Focus Ring
Speaker
Lens2)
Vent1)
IR Reciver
Bottom of the Projector
Adjustable leg3)
1)Due to the high temperature of vent area, do not get close to the vent area.
2)Do not touch the Lens and Mirror when using the projector. The Lens
and Mirror may be damaged.
3)Turn the adjustable leg left or right to adjust the angle.
PREPARATION
Side
1 2 3
No.
1
4
5
Description
(Headphone Port)
2
COMPONENT IN Port
3
AV IN Port
4
OPTICAL DIGITAL AUDIO OUT Port
5
(USB port)
6
RGB IN Port
7
Port
6
7
17
18
PREPARATION
Back
1
No.
2
Description
Port
1
2
DC IN Port
3
ANTENNA IN Port
3
PREPARATION
19
Using the Joystick Button
You can operate the projector by pressing the button or moving the joystick
left, right, up, or down.
Basic Functions
Power On
When the projector is turned off,
place your finger on the joystick
button, press it once, and release it.
Power Off
When the projector is turned on,
place your finger on the joystick
button, press it once for a few
seconds, and release it. (However,
if the menu button is on the screen,
pressing and holding the joystick
button will let you exit the menu.)
Volume
Control
Place your finger over the joystick
button and move it left or right. You
can adjust the volume level.
Programmes
Control
If you place your finger over the
joystick button and move it up or
down, you can scroll through the
saved programmes.
NOTE
• Move the joystick button up, down, left, or right. Be careful not to
press the joystick button. If you press the joystick button first, you
may not be able to adjust the volume level and/or scroll through
saved programmes.
20
PREPARATION
Adjusting the Menu
When the projector is turned on, press the joystick button one time.
You can adjust the menu items ( ,
, , ) moving the joystick
button left, right, up, or down. Move to the desired menu item, and then
press the joystick button once to select it.
Close
Projector off
Turns the power off.
Input List
Changes the input source.
Close
Clears on-screen displays
and returns to projector
viewing.
Settings
Displays the Settings menu.
Projector Status Indicators
LED Power
Indicator
LED Power
Indicator
LED Power Indicator
Red
Power standby state
Off
The projector is operating with the power on.
PREPARATION
Installation
Installation Precautions
• Place the projector in a wellventilated environment.
--To prevent internal
overheating, install the
projector in a well-ventilated
place. Do not place anything
near the projector that may
block its air vents. If the
air vents are blocked, the
internal temperature of the
projector will increase.
--Do not place the projector
on a carpet or rug. If the
projector's inlet vent is on
the bottom, be careful not to
block the vent and always
use the projector on a solid,
level surface.
--Be sure to prevent foreign
objects such as paper debris
from entering the projector.
21
--Leave an adequate open
area (30 cm or more) around
the projector.
• Do not place the projector in a
hot, cool, or humid environment.
• Do not place the projector in a
place where it will easily attract
dust.
--This may result in fire.
• Never open any cover on the
projector. There is a high risk of
electric shock.
• The projector is manufactured
using high-precision technology.
You may, however, see
tiny black dots and/or bright
coloured dots (red, blue or
green) that continuously
appear on the projector screen.
This is a normal result of the
manufacturing process and
does not indicate a malfunction.
• The remote control may not
work in an environment where
a lamp equipped with electronic
ballasts or a three-wavelength
fluorescent lamp is installed.
Replace the lamp with an
international standard lamp
for the remote control to work
normally.
• To install to the ceiling, attach
the ceiling-type bracket to
the projector with M4 x 8 mm
screws.
22
PREPARATION
Projection Distance per Screen Size
1 Place the projector on a sturdy, level surface, together with the PC or
audio/video source.
2 Place the projector an appropriate distance away from the screen. The
distance between the projector and the screen determines the actual
size of the image.
3 Position the projector so that the lens is at a right angle to the screen.
If the projector is not at a right angle, the projected image will look
distorted. To correct the distortion, use the keystone function.
(See page 36.)
4 Connect the power cord of the projector and the connected device to
the wall outlet.
Ratio of upward projection: 125 %
X
Screen
Y
C
D
C
B
D
A
Screen Size [mm]
1524
Horizontal Size (X) x 1328 x
Vertical Size (Y) [mm] 747
A [mm]
414
B [mm]
105
C [mm]
149
D [mm]
241
1778
1550 x
872
482
173
181
273
2032
1771 x
996
550
241
213
304
2286
1992 x
1121
618
309
245
336
2540
2214 x
1245
686
377
276
368
The projection distance may vary depending on the installation conditions.
CAUTION
• If the projected image looks distorted or bent, check to see if the
screen is installed properly.
PREPARATION
23
Kensington Security System
• This projector has a Kensington Security Standard connector as an
anti-theft mechanism. Connect a Kensington Security System cable as
shown below.
• For more information on installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington Security
System.
• The Kensington Security System is an optional accessory.
• What is Kensington?
Kensington is a company that provides safety systems for laptops and
other electronic devices. Website: http://www.kensington.com
24
REMOTE CONTROL
REMOTE CONTROL
Open the battery cover on the back
of the remote control and insert the
batteries which are specified in the
battery room with
poles pointing
in the correct direction. The new and
same type of batteries (1.5 V AAA)
must be used.
CAUTION
• Do not mix new batteries with old ones.
(POWER)
Turns the projector on or off.
#-"/,
TV/RAD
Selects Radio, TV and DTV programme.
BLANK
Blanks the screen.
TEXT (Teletext buttons)
T.OPT /
These buttons are used for teletext.
INPUT
Changes the input source.
Number buttons
Enters a number.
LIST
Displays the programme list.
Q.VIEW
Returns to the previously viewed
programme.
Adjusts the volume level.
FAV
Accesses your favourite programme list.
3D
Shows 3D images.
MUTE
Mutes the sound of the projector.
P
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
REMOTE CONTROL
#-"/,
25
L/R
Switches left and right in 3D mode.
INFO
Displays the information of a programme
or screen.
STILL
Freezes the moving image.
(Available in any mode other than USB
mode.)
SETTINGS
Displays or closes the Settings menu.
Q.MENU
Allows you to change the settings easily.
Up/Down/Left/Right buttons
Sets the function or moves the cursor.
OK
Shows the current mode and saves
changes to the settings.
Returns to the previous screen.
EXIT
Exits the menu.
SUBTITLE
Recalls your preferred subtitle in digital
mode.
GUIDE
Shows programme guide.
Playback control buttons
Controls playback of MY MEDIA.
Colour buttons
Sets detailed settings or gesture for each
menu.
26
REMOTE CONTROL
NOTE
• When using the remote control, the
optimal operation range is 6 metres or
less (left/right) and within a 30 degree
arc of the remote control IR receiver.
• If a cable is connected to the back
port, the optimal operating range is
3 metres or less (left/right) and within
a 30 degree arc of the remote control
IR receiver.
• For seamless operation, do not block the IR receiver.
• When you carry the remote control in the portable bag, make
sure that the buttons on the remote control are not pressed by the
projector, cables, documents, or any other accessories in the bag.
Otherwise, it may significantly reduce the battery life.
USING THE PROJECTOR
USING THE PROJECTOR
Connecting the Antenna or Cable
To watch TV using an indoor/
outdoor antenna, connect a wall
terminal and the
port
of the projector using an RF cable
(75 Ω).
You can watch public TV or cable
(analog, digital) TV.
(The RF cable is sold separately.)
NOTE
• Ensure you use a standard coaxial cable (75 Ω, sold separately)
when connecting to the projector input.
• For better image quality in locations where signal strength is low,
purchase and install a signal amplifier (booster).
• A signal splitter is required if you want to use two or more
projectors through one antenna.
• If you have any problems when installing the antenna, please
consult a suitable retailer or the store where you purchased the
antenna.
27
28
USING THE PROJECTOR
Watching Projector
Turning on the Projector
The menu screen display in this owner's manual is an example to help
users understand how to operate the product and may look different from
the actual screen.
1 Connect the power cord correctly.
2 After waiting for a moment, press the POWER button on the remote
control or the joystick button.
3 In the Language Selection screen, select a language.
4 Sets the country/region that the projector uses.
5 In the Mode Setting screen, select the setting mode you want.
* Store Demo is used when displaying the product in-store. The
picture mode is automatically reset after a certain period of time.
You can select Standard to use the product at home.
6 In the Time Zone screen, select Time Zone region option.
* This feature is available in certain countries only.
7 Select an input signal by using the INPUT button on the remote control.
Focus of the Screen Image
When an image appears on the screen, check if it is in focus and fits the
screen properly.
Focus Ring
• To adjust the focus of the image, rotate the focus ring.
• Make sure the product does not move when adjusting the focus.
USING THE PROJECTOR
29
Watching With the Projector
1 When in standby mode, press the POWER button to turn the projector
on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while watching
projector.
Button
P
Description
Scrolls through the saved programmes.
LIST
Displays the programme list.
0-9
Enters a programme number.
Adjusts the volume level.
MUTE
Mutes all sounds.
Q.MENU
Accesses the quick menu. (See page 39.)
Q.VIEW
Returns to the previously viewed programme.
4 To turn the projector off, press the POWER button.
30
USING THE PROJECTOR
To Set Programme
Image shown may differ from your projector.
Memorizing the Available Channels
Using the Auto Tuning function
This function allows your projector to memorize the available channels. Be
sure to activate this function when you move home or move the position of
your projector. The antenna must be connected to your projector and the
channels must be currently available to use this function.
1 Press the SETTINGS button.
2 Press the , , , or button to select SETUP and press the OK
button.
3 Press the
button.
,
button to select Auto Tuning and press the OK
4 Select Start to start automatic tuning. The projector scans and saves
available programmes automatically.
5 When you are finished, press EXIT.
USING THE PROJECTOR
31
Memorizing or Deleting Channels Manually
1 Press the SETTINGS button.
2 Press the , , , or button to select SETUP and press the OK
button.
3 Press the
button.
,
button to select Manual Tuning and press the OK
4 Scroll through the programme types, and then add or delete
programmes.
5 When you are finished, press EXIT.
NOTE
• If the projector scans a blocked programme, you will be prompted
to enter your password to keep the programme scanned.
• You can store up to 1000 programmes. The number of
programmes that you can store differs depending on the
broadcasting signal environment.
• Auto Tuning memorizes the programmes that are currently being
broadcast.
• The programmes are stored in the order of DTV, RADIO and TV.
32
USING THE PROJECTOR
Editing Your Programme List
1 Press the SETTINGS button.
2 Press the , , , or button to select SETUP and press the OK
button.
3 Press the
button.
,
button to select Programme Edit and press the OK
4 Edit programmes using the following buttons.
Button
Description
Green
Selects a programme number to be skipped.
Yellow
Block or unblock a programme.
Blue
Programme Number Edit (Only Digital mode)
Selects your desired programme number.
FAV
Adds a favourite programme.
5 When you are finished, press EXIT.
USING THE PROJECTOR
33
Favourite Programme Setup
1 Press the SETTINGS button.
2 Press the , , , or button to select SETUP and press the OK
button.
3 Press the
button.
,
button to select Programme Edit and press the OK
4 Move to your desired programme.
5 Press FAV to access the Set as Favourite.
6 Press the , buttons to scrolls through programme group.
7 Press the OK button.
Set as Favourite
Select a favourite programme group.
Multiple selection is available.
Group A
Group B
Group C
Group D
OK
Cancel
34
USING THE PROJECTOR
Additional Options
Adjusting Aspect Ratio
• Select SETTINGS → PICTURE → Aspect Ratio to change the aspect
ratio.
NOTE
• Available picture size may differ depending on the input signal.
• You can also use the Q.MENU button.
Menu
Description
16:9
Resizes images to the 16:9 ratio.
Just Scan
Displays video images in the original size without
removing parts of the edge of the image.
• If you select Just Scan, you may see image noise at
the edge or edges of the screen.
Original
When your projector receives a wide screen signal it will
automatically change to the picture format broadcasted.
Full Wide
When projector receives the wide screen signal, it will let
you adjust the picture horizontally or vertically, in a linear
proportion,to fill the entire screen fully. 4:3 and 14:9 video
is supported in full screen without any video distortion
through DTV input.
• In Analogue/DTV/AV mode, Full Wide is available.
4:3
Resizes images to the previous standard 4:3.
14:9
You can view a picture format of 14:9 or a general
projector programme in the 14:9 mode. The 14:9 screen
is viewed in the same way as in 4:3, but is moved up or
down.
Zoom
Resizes the image to fit the screen width. The top and
bottom parts of the image may be cut off.
• Press the
or
button to zoom in or out of the
image.
• Press the
or
button to move the image.
USING THE PROJECTOR
Menu
Cinema
Zoom 1
Description
Formats an image to the cinemascope ratio, 2.35:1. It
ranges from 1 to 16.
• Press the
or
button to zoom in or out of the
image.
• Press the
or
button to move the image.
• If you enlarge or reduce an image, the image may be
distorted.
35
36
USING THE PROJECTOR
Using the Edge Adj (4 Corner Keystone) Function
Edge Adj (4 Corner Keystone) adjusts the horizontal and vertical sides of
the projected image if the projector is at an angle and not perpendicular to
the screen. This feature ensures the shape of the projected image is not
distorted.
Use this feature only when the projector cannot be set up at the optimal
angle. Edge Adj may result in a loss of image quality.
Edge Adj
ꔂ Move
Prev.
Top Left
Top Right
Bottom Left
Bottom Right
Reset
Test Pattern
1 Go to SETTINGS → OPTION 2 → Edge Adj.
2 The value range of Edge Adj is as follows.
--Top Left (H: 0 to 100, V: 0 to 100)
--Top Right (H: -100 to 0, V: 0 to 100)
--Bottom Left (H: 0 to 100, V: -100 to 0)
--Bottom Right (H: -100 to 0, V:-100 to 0)
NOTE
•When using Auto Keystone(Vertical), the current value set for
Edge Adj is changed to the value that has been set with Auto
Keystone(Vertical).
•When the input is set to SCREEN SHARE, Edge Adj feature is
disabled and cannot be used.
USING THE PROJECTOR
Changing Input Device
To select an external input
Selects external input.
The illustration of the menu may differ from the actual screen on the
product.
• Press the INPUT button on the remote control to display the input
selection screen.
--Connected inputs are displayed first. However, SCREEN SHARE
and AV input is always activated.
• Select an input signal using the remote control's INPUT button to
connect the projector to the desired input.
You can use the
,
, , or
button to switch between all the
input modes.
Input List

ꔂ Move ꔉ OK
AV
SCREEN SHARE
HDMI1
HDMI2
Antenna
USB
Component
Input Label
RGB
Exit
37
38
USING THE PROJECTOR
Selecting an Input Label
Displays which devices are connected to which input ports.
Input Label
AV
Component
RGB
HDMI1
HDMI2
Close
1 Press the INPUT button on the remote control to display the input
selection screen.
2 Press the Red button.
3 Use the or button to scroll to one of the input sources.
4 Use the or button to select one of the input labels.
Blank Function
Using the Blank Function
This function may be effective when you need to draw attention during a
meeting or training.
1 Press the BLANK button, and the screen is covered by the
background colour. You can change the background colour by
referring to Selecting a Blank Image.
2 Press any button to clear the blank function. To cover the screen
temporarily, press the BLANK button on the remote control. Do not
block the lens with any object while the projector is running. It may
become overheated and deformed or even cause a fire.
USING THE PROJECTOR
Selecting a Blank Image
1 Press the SETTINGS button.
2 Press the , , , or buttons to select OPTION 2 and press
the OK button.
3 Press the
button.
buttons to select Blank Image and press the OK
,
4 Press the
or
button to move to the setting or option you want
and press the OK button.
Using the Quick Menu
You can easily customize your frequently used menus.
1 Press the Q.MENU button.
2 Press the or button to select a menu and press OK button.
Menu
Description
Aspect Ratio
Resizes the picture.
PJT Mode
Turns the projected image upside down or flips it
horizontally.
Picture Mode
Changes the picture mode.
Audio or
Audio
Language
Changes the sound output.
Sleep Timer
Sets the projector to be turned off at the specified
time.
Clear Voice II
Makes the voice from the projector crisp and clear.
Skip Off/On
Sets the Skip Off/On.
USB Device
Allows you to remove a connected USB device in a
safe manner.
(The menu is displayed only when the USB device is
connected.)
3 Press the
or
button to scroll through the following menus.
39
40
ENTERTAINMENT
ENTERTAINMENT
Using SCREEN SHARE
1 Set the external input of the projector to SCREEN SHARE.
2 Enable related SCREEN SHARE function on the device you wish to
connect.
3 Connect the projector from the search list on the device you wish to
connect. (When you connect the projector to your laptop, input the PIN
code shown on your display. The request for a PIN will be shown only
at the initial connection.)
4 If the desired device accepts the request, SCREEN SHARE will be
started.
CAUTION
• Windows 7 / 8 / 8.1 are compatible with SCREEN SHARE. However,
other versions of Windows, and some other operating systems, may
not be compatible with SCREEN SHARE.
• Ice Cream Sandwich, Jellybean, and KitKat versions of LG’s Android
devices are guaranteed to be compatible.
• When connecting via SCREEN SHARE, place the device close to
the projector.
• The response rate and image quality may vary depending upon the
user’s environment.
• For more information on the device you want to connect to, refer to
its owner’s manual.
• Certain Windows 8.1 laptops may have difficulty in reconnecting
when initializing the device information during a wireless connection.
In this case, it is recommended that you remove the registered
device and reconnect.
• When the input is set to SCREEN SHARE, these features are
disabled and cannot be used: Edge Adj, PJT Mode, and Auto
Keystone(Vertical).
ENTERTAINMENT
Setting Up Bluetooth on the Projector
This option is used to output sound from the projector through Bluetooth
audio devices.
NOTE
•The devices that can be connected are as follows: LG BTS1,
LG HBS-700 , LG HBS- 730 , LG HBS-800 (Models available for
purchase may vary by region.)
•Products from other manufacturers may not be compatible.
•You can use the remote control to adjust the volume of the
connected device.
•When connecting devices wirelessly, if the device connection fails,
check that the device is connected to a power supply and also check
that the Bluetooth audio device is operating properly.
•If Bluetooth is turned on, the projector will automatically connect
to the last connected Bluetooth device when the projector powers
on. (Be sure to check that the last connected Bluetooth device is
powered on as well.)
•This projector does not support the LG TV Sound Sync feature. To
use products that support the LG TV Sound Sync feature, use the
general Bluetooth mode instead of the LG TV mode.
•The Bluetooth function is to connect the product to Bluetooth
speakers or Bluetooth headset. You cannot connect the product to a
mobile phone through the Bluetooth function.
41
42
ENTERTAINMENT
Searching for Bluetooth Devices and Connecting
Go to SETTINGS → AUDIO → Sound Out → Bluetooth → Search
Device to search for nearby Bluetooth audio devices and then connect any
detected devices to the projector. (If the device name is longer than
20 characters, only the first 20 will be displayed.)
1 Set the Bluetooth device to pairing mode and then select Search
Device.
• Select Stop searching to view the devices detected so far.
• If the device has not been detected, check that the device is powered
on and in pairing mode.
• The time it takes to search for devices may vary according to the
signal strength and the number of devices.
AUDIO
•• Sound Mode
ꔂ Move ꔉ OK
: Standard
•• Sound Effect
•• Auto Volume
: Off
• Sound Out
: Bluetooth
•• DTV Audio Setting : Auto
•• AV Sync. Adjust
: Off
2 When the search is complete, you can select a Bluetooth device and
connect to it.
• You can stop the connection process immediately by selecting Stop
searching.
• The time it takes to connect to a device may vary according to the
signal strength and the number of devices.
Search Device
List
Search Device
Searching...
Please wait.
List
Search complete
HBS-700
Press OK(ꔉ) to connect the device.
Stop searching
Close
Re-search
Close
ENTERTAINMENT
43
3 When a Bluetooth device is connected, you will hear sound from the
projector through the connected device.
• The connected Bluetooth device will be added automatically to the
List of registered devices. Once registered, Bluetooth devices can
be connected simply by selecting them from the List of registered
devices without having to search for them.
• Connected devices can only be disconnected from SETTINGS →
AUDIO → Sound Out → Bluetooth → List of registered devices.
Connecting, Disconnecting, or Deleting Bluetooth
Devices in the List of Registered Devices
In SETTINGS → AUDIO → Sound Out → Bluetooth → List of
registered devices, Bluetooth devices are shown in the order that they
were connected, and the same devices can be reconnected simply by
selecting them without having to search for them again.
List of registered devices
List
HBS-700
Press OK(ꔉ) to connect the device.
Delete All
Delete
Close
Connecting
Select a Bluetooth device from the List of registered devices to connect
to it.
• The registered Bluetooth device will attempt to connect automatically
depending on the characteristics of the device. (Refer to the manual for
the Bluetooth device.)
• You can stop the connection process immediately by selecting Stop.
• The time it takes to connect to a device may vary according to the signal
strength and the number of devices.
44
ENTERTAINMENT
Disconnecting
Select Disconnect to disconnect the device.
• You can only disconnect a device from the List of registered devices.
Deleting
Select Delete Marked or Delete All to delete any registered devices.
• Delete Marked: Press the red button in List of registered devices to
delete the selected device.
• Delete All: Select Delete All in List of registered devices to delete all
of the registered devices.
Adjusting AV Sync. Adjust
When a Bluetooth device is connected, go to SETTINGS → AUDIO →
AV Sync. Adjust to adjust the synchronization between the video and the
Bluetooth headset sound.
◀
• AV Sync.Adjust
• Bluetooth
0 -
On
▶
+
Close
• This feature is only available when a Bluetooth device is connected.
• Audio sync may vary by manufacturer.
• When playing video from a connected USB drive, AV Sync. Adjust can
also be adjusted using the Set Audio. menu.
MY MEDIA
45
MY MEDIA
Before Using
Connecting a USB Device
Connect a USB device (external
HDD, USB memory) to the USB port
of projector to enjoy the content files
stored in the USB device with your
projector. You cannot write or delete
data in the USB device. Connect a
USB flash drive as shown below.
USB flash
Drive

Removing a USB Device
1 Click the Q.MENU button.
2 Use the or button to move to USB Device and press the OK
button.
3 Select a USB to remove. Wait for confirmation that the USB device has
stopped before removing the USB.

NOTE
• If detached early, an error may occur on the projector or the USB
storage device.
• Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
46
MY MEDIA
Tips for using a USB device
• If the USB storage device has a built-in auto recognition program or uses
its own driver, it may not work.
• Some USB storage devices may not work or may work incorrectly.
• If you use a USB extension cable, the USB device may not be
recognized or may not work properly.
• Use only USB storage devices formatted with the Windows FAT32 or
NTFS file system.
• For external USB HDDs, it is recommended that you use devices with a
rated voltage of less than 5 V and a rated current of less than 500 mA.
• It is recommended to use a Hard Disk Drive with its own power supply.
(If the power being supplied is not sufficient, the USB storage device
may not be detected correctly.) Note, a USB Hub is not supported.
• It is recommended that you use USB flash drives of 32 GB or less and
USB HDDs of 2 TB or less.
• If a USB HDD with power-saving function does not work properly, turn
the power off and on. For more information, refer to the user manual of
the USB HDD.
• Data in USB storage device can be damaged so be sure to back
up important files to other devices. Data maintenance is the user's
responsibility and the manufacturer is not responsible for data loss.
MY MEDIA
47
To Use My Media
1 Press the SETTINGS button on the remote control.
2 Select MY MEDIA.
Select desired file from the list. Watch the chosen file.
Sets play related settings by checking option during disk playback.
My Media supporting file
• Maximum data transmission rate: 20 Mbps (Mega bit per second)
• External supported subtitle formats: *.smi, *.srt, *.sub (MicroDVD,
SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX)
• Internal supported subtitle formats: SRT/ASS/SSA (Supports internal
subtitles generated from DivX6)
Video Supported Codec
Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p)
Extension
.asf
.wmv
.divx
.avi
.mp4
.m4v
.mov
.mkv
.ts
.trp
.tp .mts
.m2ts
Codec
Video
VC-1 Advanced Profile, VC-1 Simple and
Main Profiles
Audio
WMA Standard, WMA 9 Professional
Video
DivX3.11, DivX4, DivX5, DivX6, XVID,
H.264/AVC
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital
Video
H.264 / AVC, MPEG-4 Part 2
Audio
AAC
Video
H.264 / AVC
Audio
HE-AAC, Dolby Digital
Video
H.264 / AVC, MPEG-2, VC-1
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, AAC
48
MY MEDIA
Extension
.vob
.mpg
.mpeg
Codec
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVDLPCM
Video
MPEG-1
Audio
MPEG-1 Layer I, II
Audio File
File type
mp3
AC3
MPEG
AAC,
HEAAC
CDDA
Item
Bit rate
Sampling rate
Bit rate
Sampling rate
Bit rate
Sampling rate
Bit rate
Sampling rate
32 kHz to 48 kHz
32 kbps to 640 kbps
32 kHz, 44.1 kHz, 48 kHz
32 kbps to 448 kbps
32 kHz to 48 kHz
24 kbps to 3844 kbps
8 kHz to 96 kHz
Bit rate
1.44 kbps
Sampling rate
44.1 kHz
Bit rate
LPCM
Info
32 Kbps to 320 Kbps
Sampling rate
1.41 Mbps to 9.6 Mbps
Multi-channel : 44.1 kHz, 88.2 kHz /
48 kHz, 96 kHz
Stereo : 176.4 kHz, 192 kHz
MY MEDIA
49
Available photo file
File type
2D (jpeg,
jpg, jpe),
3D (jps)
3D (mpo)
BMP
Item
Info
Support
File type
SOF0: Baseline, SOF1: Extend Sequential,
SOF2: Progressive
Picture
Size
Minimum: 64 x 64
Maximum: Normal Type: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
Support
File type
MPO
Picture
Size
4:3 size : 3648 x 2736, 2592 x 1944,
2048 x 1536
3:2 size : 3648 x 2432
Picture
Size
Minimum: 64 x 64
Maximum: 9600 (W) x 6400 (H)
Support
File type
Interlace, Non-Interlace
Picture
Size
Minimum: 64 x 64
Maximum: Interlace: 1200 (W) x 800 (H)
Non-Interlace: 9600 (W) x 6400 (H)
PNG
* BMP and PNG format files may be slower to display than JPEG.
50
MY MEDIA
Watching the Videos
In the Movie List, you can watch movies stored on the connected USB
device.
Controls playback and sets options while viewing videos.
Tips for Playing Video Files
• Some subtitles created by users may not work properly.
• The video and subtitle files should be placed in the same folder. For
subtitles to display correctly, the video and subtitle files must have the
same name.
• We do not support any stream that contains GMC (Global Motion
Compensation) or Qpel (Quarterpel Motion Estimation).
• Only H.264 / AVC profile level 4.1 and lower is supported.
• Video files that exceed 50 GB (gigabyte) are not supported for playback.
The file size limit is dependent on the encoding environment.
• DTS audio codec is not supported.
Browsing Movie List
Play a video file stored from a connected device.
1 Connect a USB storage device.
2 Press the SETTINGS button.
3 Use the , , , or button to select MY MEDIA and press the
OK button.
4 Use the
button.
, or
button to select Movie List and press the OK
MY MEDIA
5 Use the
,
,
the OK button.
, or
button to select the file you want and press
2
1
4
3
Page 1/1
Movie List
USB STORAGE DEVICE
Drive1
Drive2
Drive3
Drive4
5
PAGE
Drive5
6
No.
Go to upper folder
Exit
7
8
Description
Thumbnails
1
Abnormal file
File not supported
2
File List
3
Moves to the upper level folder.
4
Current page/Total no. of folder pages
5
Current page/Total no. of file pages
6
Moves to the top level folder.
7
Moves to the upper level folder.
8
Exit Movie List.
Page Change
Page 1/1
Butterfly_...
01:34:33
Go to root folder
51
52
MY MEDIA
6 Control playback by using the following buttons.

Item
Q.MENU
Option
Hide
나가기 Exit
Description
Shows the current playing position. Use
move forward or backward.
Stops playing and returns to Movie List.
or
buttons to
Returns to normal playback.
Pauses the media player.
If no button is pressed on the remote control for 10 minutes
after pausing, the playback is restarted.
Displays in slow motion.
Whenever this button is pressed, the playback speed is
changed.: x2, x4, x8, x16, x32
Reduces power consumption by adjusting peak screen
brightness.
Switches to the 3D screen.
Option
Hide
Exit
A pop-up window will appear.
Hides the playback bar. Press the OK button to make it
appear.
Returns to the Movie List screen.
MY MEDIA
53
Options for Movie List
1 Press the Q.MENU button.
2 Use the or button to move to a desired option and press the OK
button.
3 Use the
,
,
, or
button to set up each item.
Set Video Play.
Item
Description
Picture
Size
Selects the size of a playback screen.
• Full: Files are played in full screen mode according to
the aspect ratio of video.
• Original: Displays the video in the original size.
Audio
Language
Allows you to select the language you want for the file with
multiple audio tracks. This option is not available if the file
has only one audio track.
Subtitle
Language
The subtitle can be turned on or off.
• Language: One of any of the available languages can
be selected.
• Code Page: A character set used for a subtitle can be
selected.
--Sync: If a subtitle is not synchronized with its video,
you can adjust its speed at 0.5 seconds unit.
--Position: Moves the location of a subtitle.
--Size: Changes the subtitle font size.
Repeat
Turns the repeat function On or Off.
When it is set to off, the next file can be played
sequentially if the file name is similar.
Set Video.
You can change video settings. (Refer to PICTURE Settings on page 74.)
Set Audio.
You can change audio settings. (Refer to AUDIO Settings on page 80.)
Set 3D Video
You can set 3D video or 2D video.
3D setting
You can set 3D settings. (Refer to OPTION 1 Settings on page 89.)
54
MY MEDIA
Registering the DivX code
Checks DivX Reg. Code for replaying DivX protected videos. Register at
http://vod.divx.com.
Use Reg. Code to rent or purchase movies at www.divx.com/vod.
1 In the Settings menu, move to OPTION 1 and press DivX(R) VOD.
Registration
Deregistration

2 Press the
button.
or
Close
button to move to Registration and press the OK
You must register your device to
play DivX(R) protected videos.
Registration Code: XXXXXXXXXX
Register at http://vod.divx.com

Yes
3 Check the DivX Registration Code.

NOTE
• Rented/purchased DivX files cannot be played if the DivX
Registration Code of a different device is used. Use only the DivX
Registration Code granted to this specific device.
• Converted files not conforming to the DivX Codec Standard may not
play or may produce abnormal sound.
MY MEDIA
To deregister the DivX code
Use the DivX deregistration code to deactivate the DivX DRM function.
1 In the Settings menu, move to OPTION 1 and press DivX(R) VOD.
2 Use the or button to go to Deregistration and press the OK
button.
3 Select Yes.
Your device is already registered.
Are you sure you wish to deregister?
Yes
No
Deregistration code : ********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No


NOTE
• What is DRM [Digital Rights Management]?
DRM technologies and services protect the interests and rights of
copyright holders by preventing illegal use of digital content. Files
can be played after the license is verified through an online method,
etc.
55
56
MY MEDIA
Viewing the Photos
You can view photos stored on a connected device.
Supported Photo Files
PHOTO (*.JPEG)
Baseline: 64-pixel (width) x 64-pixel (height) - 15360-pixel (width) x
8640-pixel (height)
Progressive: 64-pixel (width) x 64-pixel (height) - 1920-pixel (width) x
1440-pixel (height)
• Only JPEG files are supported.
• Non-supported files are displayed in the form of an icon.
• An error message is displayed for corrupted files or file formats that
cannot be played.
• Corrupted files may not be displayed properly.
• It may take some time to view high-resolution images in full screen.
Browsing Photo List
1 Connect a USB storage device.
2 Press the SETTINGS button.
3 Use the , , , or button to select MY MEDIA and press the
OK button.
4 Use the
button.
buttons to select Photo List and press the OK
or
5 Use the
,
,
the OK button.
, or
button to select the file you want and press
4
3
2
1
Page 1/1
Photo List
USB STORAGE DEVICE
Drive1
Drive2
Drive3
Drive4
5
PAGE
Drive5
Page 1/1
Butterfly_...
06/09/2014
Go to root folder
6
Go to upper folder
7
Page Change
Exit
8
MY MEDIA
No.
Description
Thumbnails
1
Abnormal file
File not supported
2
File List
3
Moves to the upper level folder.
4
Current page/Total no. of folder pages
5
Current page/Total no. of file pages
6
Moves to the top level folder.
7
Moves to the upper level folder.
8
Exits Photo List.
6 Control playback by using the following buttons.
01_a.jpg
2008/12/10
1920 x 1080
479 KB
[1/4]
Slideshow
Item
BGM
Q.MENU
Option
Hide
Exit
Description
Selects the previous or next photo.
Slideshow
BGM
All photos are displayed during slide show.
• Set Slide Speed in the Option → Set Photo View.
menu.
You can listen to music while viewing photos in full size.
• Set the BGM in Option → Set Photo View. menu.
57
58
MY MEDIA
Item
Description
Rotates photos.
• Rotates a photo 90°, 180°, 270°, 360° clockwise.
• Photos cannot be rotated if their width is greater than
the height of the max. supported resolution.
Views the photo in full mode or original mode.
Press the blue button to enlarge the image.
Reduces power consumption by adjusting peak screen
brightness.
Switches to the 3D screen.
A pop-up window will appear.
Option
Hide
Hides the menu on the full size screen.
• To see the menu, press the OK button on the remote
control.
Exit
Exit from full screen photo view.
Options for Photo List
1 Press the Q.MENU button.
2 Use the or button to move to a desired option and press the OK
button.
3 Use the
,
,
, or
button to set up each item.
Set Photo View.
Item
Description
Slide speed
Selects a slideshow speed.
BGM
Selects a music folder for the background music.
• You cannot change the music folder while the
background music is playing.
• For background music, only the folder from the same
device can be selected.
--Repeat: Selects repeat play.
--Random: Selects random play.
MY MEDIA
59
Set Video.
You can change video settings. (Refer to PICTURE Settings on page 74.)
Set Audio.
You can change audio settings. (Refer to AUDIO Settings on page 80.)
Set 3D Video
You can set 3D image or 2D image.
3D setting
You can set 3D settings. You can set 3D settings. (Refer to OPTION 1
Settings on page 89.)
Listening to Music
You can play audio files stored on the connected device.
Supported Music Files
*.MP3
Bit rate range 32 Kbps to 320 Kbps
• Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz
• Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz
Browsing Music List
1 Connect a USB storage device.
2 Press the SETTINGS button.
3 Use the , , , or button to select MY MEDIA and press the
OK button.
4 Use the
5 Use the
button to select Music List and press the OK button.
or
,
,
the OK button.
1
, or
button to select the file you want and press
4
3
2
Page 1/1
Music List
USB STORAGE DEVICE
Drive1
Drive2
Drive3
Drive4
5
PAGE
Drive5
Page 1/1
Butterfly_...
03:25
Go to root folder
6
Go to upper folder
7
Page Change
Exit
8
60
MY MEDIA
No.
Description
Thumbnails
Abnormal file
1
File not supported
2
File List
3
Moves to the upper level folder.
4
Current page/Total no. of folder pages
5
Current page/Total no. of file pages
6
Moves to the top level folder.
7
Moves to the upper level folder.
8
Exits Music List.
6 Control playback by using the following buttons.
Page 1/1
Music List
USB STORAGE DEVICE
Drive1
PAGE
Page Change
Page 1/1
Butterfly_...
03:25
002. - B02.mp3
Q.MENU
Item
Option
Hide
Description
Changes the playing position.
Stops playing.
Returns to normal playback.
Pauses the media player.
Exit
MY MEDIA
Item
61
Description
Plays the previous/next file.
Reduces power consumption by adjusting peak screen
brightness.
Option
Sets up the options of Music List.
Hide
Hides the playback bar.
• Press the OK button to make the playback bar appear.
Exit
Returns to the Music List screen.
Options for Music List
1 Press the Q.MENU button.
2 Use the or button to move to a desired option and press the OK
button.
3 Use the
,
Set Audio Play.
,
, or
button to set up each item.
Item
Description
Repeat
Selects repeat play.
Random
Selects random play.
Set Audio.
You can change audio settings. (Refer to AUDIO Settings on page 80.)
62
MY MEDIA
Viewing Files
You can see document files stored on a connected device.
Supported File Formats
XLS, XLSX, DOC, DOCX, PPT, PPTX, TXT, PDF, HWP
Microsoft Office: 97/2000/2002/2003/2007 Version
Adobe PDF: 1.0/1.1/1.2/1.3/ 1.4 Version
Hangul: 97/2000/2002/2005/2007 Version
• File Viewer realigns a document, so it may look different from what is
displayed on a PC.
• For documents that include images, the resolution may look lower during
the realigning process.
• If the document is large or has many pages, it may take longer to load.
• Unsupported fonts may be replaced by other fonts.
• The file viewer may not open for Office documents that contain many
high resolution images. In that case, reduce the image file size, save it
on a USB storage device and run the file viewer again or connect your
PC to the projector and open the file on your PC.
MY MEDIA
63
Browsing File List
1 Connect a USB storage device.
2 Press the SETTINGS button.
3 Use the , , , or button to select MY MEDIA and press the
OK button.
4 Use the
5 Use the
button to select File List and press the OK button.
or
,
,
the OK button.
, or
button to select the file you want and press
2
1
Page 1/1
File List
USB STORAGE DEVICE
DOC
3
Drive1
Drive2
Drive3
Drive4
4
PAGE
Drive5
Page 1/1
Butterfly_...
06/09/2014
Go to root folder
Go to upper folder
Exit
5
6
7
No.
Description
1
File List
2
Moves to the upper level folder.
3
Current page/Total no. of folder pages
4
Current page/Total no. of file pages
5
Moves to the top level folder.
6
Moves to the upper level folder.
7
Exits File List.
Page Change
64
MY MEDIA
6 Control playback by using the following buttons.
• Click Go Page, then the pop-up window for selecting the number of
page appears. Input the page to move to the page you want.
• Press the
button to zoom in or zoom out.
Press the OK button and then use the Up/Down/Left/Right buttons to
move to Go Page or Zoom.

Item
Go Page
ꔦ Zoom
Q.MENU
Option
Hide
Exit
Description
Go Page
Moves to the page you want.
Use the Up/Down/Left/Right buttons to select a page
and press the OK button.
Zoom
Enlarges or reduces the document.
Option
Sets up the options of File Viewer.
Hide
Hides the menu.
• Press the OK button to make it appear.
Exit
Returns to the File Viewer screen.
MY MEDIA
65
Options for File List
1 Press the Q.MENU button.
2 Use the , , , or
button to set up each item.
Set FileViewer Option
Item
Single Page
Loading
Image Quality
Docu­ment
Align
Description
On
Loads and displays pages one by one. The
initial loading time is short but a content-heavy
page may be displayed slowly.
Off
Loads all pages of a file to memory before it
starts to display them. The initial loading time is
long but you can navigate pages quickly after
loading is complete.
If a file is too large, it may fail to load all the
pages.
You can set the quality of the image included in the
document. The following three options are available
for the image quality: High, Medium, Low. Higher the
image quality, lower the display time.
Selects initial document align method.
File Viewer settings are default, so close the currently opened document to
apply changes to the new document, if any.
66
3D FUNCTION
3D FUNCTION
3D technology uses different video frames for each eye to add depth to the
video.
While Watching 3D
WARNING
• If you view 3D video or images too closely for a long period of time, you
may experience eyestrain.
• If you watch the projector or game screen for a long time with 3D
glasses on, you may experience dizziness or eye fatigue.
• People with chronic diseases (epilepsy, cardiovascular disease, blood
pressure-related diseases, etc.), pregnant women, and people with
serious motion sickness should avoid watching 3D video.
• People with stereo blindness, or with stereopsis problems, should also
avoid watching 3D video content. It may cause double vision or visual
discomfort.
• People with strabismus, amblyopia, or astigmatism may have difficulty
perceiving video depth and may be fatigued easily due to double vision
or other ailments. It is recommended to rest more frequently than other
viewers.
• Because 3D can be perceived as real, some viewers may be surprised
or overexcited.
• Do not watch 3D images near fragile objects or any objects that can be
knocked over easily.
• Take care not to injure yourself as you may subconsciously try to move
away from the life-like 3D images.
3D FUNCTION
67
• Warning about photosensitivity seizures
--Some users may experience a seizure or other abnormal symptoms
when they are exposed to a flashing light or particular patterns from
a video game. If anyone in your family has a history of epilepsy or
has ever experienced any kind of seizure, please consult your doctor
before viewing 3D images.
If you experience one of the following symptoms while watching a 3D
video, stop watching the 3D video immediately and take a rest.
--Dizziness, switched eyesight, twitching of the eye or facial muscles,
involuntary movements, cramp, loss of consciousness, confusion,
loss of sense of direction, or nausea. If the symptom does not
disappear, please consult your doctor.
• You can reduce the risk of photosensitive seizures by taking the
following preventive measures.
--Take a rest of 5 to 15 mins. for every 1 hour of viewing.
--If vision varies between each eye, correct the variation before
beginning to watch a 3D video.
--Ensure that the 3D video is directly in front of you, at eye level.
--You should stop watching if you experience a headache, fatigue, or
dizziness.
--Do not view 3D images for a long period of time when you are tired
or ill.
CAUTION
• Extra special care is required for children watching a 3D video.
When Watching 3D Video
• Prevent children of 5 years or younger from watching a 3D video. It may
impair the development of their eyes.
• Children 10 years old or younger are still developing their eyesight and
may have an excessive tendency to touch or jump at the screen. Adult
guidance and supervision is recommended.
• Since the distance between the eyes is narrower for children than in
adults, children tend to notice a greater difference in the images seen by
each eye. Therefore, even while watching the same 3D video, children
may have a greater depth perception than adults.
• Children under 19 years old or younger may respond with sensitivity to
the light stimuli of 3D content. Excessive viewing when fatigued is not
recommended.
68
3D FUNCTION
• Elderly viewers may have a reduced depth perception than younger
viewers. Avoid watching video nearer than the recommended distance.
• Watch 3D images within the optimum viewing angle and distance.
• If you are outside the viewing angle or distance, you may not be able to
see 3D images. You cannot view 3D images when you are lying down.
• You may see left and right images overlapped during projector
initialization after it is powered on. It may take some time for
optimization.
• It may take some time for the 3D image to look normal after you turn
your eyes away from the screen and look back at the 3D image.
• It may flicker slightly while watching 3D images under a 3 wavelength
lamp fluorescent light (50 Hz to 60 Hz) or near windows. If so, it is
recommended to block the sun light with a curtain and to dim the lights.
• The 3D glasses must be DLP-LINK (DLP Ready) type.
• You may not be able to watch 3D properly if there is an obstacle
between the projector and 3D glasses.
• Install the 3D projector as far as possible from other devices.
• If a future 3D broadcasting format that is not supported by this projector
becomes the standard, an additional device such as a set-top box may
be required.
Please check the following when using 3D glasses.
• Do not use 3D glasses as ordinary glasses, sunglasses, or protective
goggles.
--If you do so, this may cause injury.
• Do not store 3D glasses in very hot or very cold conditions. If you do,
this may cause them to become distorted. Do not use distorted glasses.
• Do not drop 3D glasses or allow them to come into contact with other
objects.
--This may cause product malfunction.
• The lenses of 3D glasses are easily scratched. Use a soft clean cloth
when cleaning them.
• Foreign particles on the cloth may cause scratches.
• Do not scratch the surface of the 3D glasses' lenses with sharp objects
or wipe them with chemicals. If the lenses get scratched, images may
not look normal when viewing 3D.
69
3D FUNCTION
Requirements for Watching 3D Images
* Optimum viewing angle: Top/Bottom/Left/Right 9°
Recommended viewing distance: 3 m to 5 m
Recommended screen size: 101 cm

* Watching 3D videos should be done in dark room environments only.
NOTE
• The pairing with the DLP-LINK glasses is affected by the intensity of
light reflected from the screen. Therefore, the pairing with DLP-LINK
glasses may not work properly if the light reflected from the screen is
not bright enough, such as when the surrounding area is bright, the
screen is big, or the maximum energy saving mode is enabled.
• Some menus may not work while playing a 3D video.
• You can only watch a 3D video properly when the 3D video format
option has been selected on the projector.
70
3D FUNCTION
Using the DLP-LINK (DLP-Ready) Type Glasses
1 While watching 3D images from the projector, press buttons on the
glasses.
2 When you press the button, the glasses flicker while synchronizing with
the 3D images. (The flickering is a unique operation method of DLPLINK type glasses. It may be different depending on the glasses type.)
3 If the glasses flicker or problems occur while watching 3D, first turn
the lights off to make the room darker. Contact your projector seller for
queries about the glasses.
To view 3D images
3D imaging is a technology that utilizes the slight difference in left/
right eyes to make the images on the projector appear just like real-life
3-dimensional space.
1 Play a 3D-image title or tune to a 3D channel.
2 Press the 3D button to activate 3D.
3 Turn on the 3D glasses and put them on.
4 While viewing 3D images, press the 3D button on the remote control to
end 3D image viewing.
5 Press the L/R button to switch the playing direction of an image. Select
a screen with better 3D display quality.
--If you press the 3D button during viewing, it returns to 2D.
* Depending on the input signal, the available 3D type may differ.
3D FUNCTION
71
Supported 3D Mode
Horizontal Vertical
Signal Resolution Frequency Frequency
(kHz)
(Hz)
720p
1080i
1280 x
720
89.9 / 90
59.94
/ 60
Frame Packing
75
50
Frame Packing
45
60
Side by
side(Half), Top
and Bottom
37.5
50
Side by
side(Half), Top
and Bottom
33.7
60
Side by side
(Half), Top and
Bottom
28.125
50
Side by
side(Half), Top
and Bottom
53.95
/ 54
23.98
/ 24
Frame Packing
60
Side by
side(Half), Top
and Bottom,
Single Frame
Sequential
56.25
50
Side by
side(Half), Top
and Bottom,
Single Frame
Sequential
27
24
Side by
side(Half), Top
and Bottom
33.7
30
Side by side
(Half), Top and
Bottom
1920 x
1080
HDMI
67.5
1080p
1920 x
1080
Supported 3D
Formats
72
3D FUNCTION
Horizontal Vertical
Signal Resolution Frequency Frequency
(kHz)
(Hz)
Supported 3D
Formats
33.75
30
Side by
side(Half),
Top and
Bottom, MPO,
JPS(Photo)
USB
1080p
1920 x
1080
RGB
1080p
1920 x
1080
67.5
60
Side by
side(Half), Top
and Bottom
720p
1280 x
720
37.5
50
Side by side,
Top and Bottom
1080i
1920 x
1080
28.125
50
Side by side,
Top and Bottom
DTV
CUSTOMIZING SETTINGS
73
CUSTOMIZING SETTINGS
* The illustration of the menu may differ from the actual screen on the
product.
SETTINGS
1 Press the SETTINGS button.
2 Use the , , , or button to select the desired item and press
the OK button.
3 Use the
,
,
the OK button.
, or
button to set up the desired item and press
4 Press the EXIT button when completed.
Menu
Description
PICTURE
Adjusts the image quality for optimal viewing.
AUDIO
Adjusts the sound quality and volume level.
SETUP
Sets up or edits a programme.
TIME
Sets the time and time-related features.
WIRELESS
Wireless-related features.
LOCK
Locks or unlocks a programme.
OPTION 1
Customizes the general settings.
OPTION 2
Customizes the settings related the projector.
INPUT
Selects the desired input source.
MY MEDIA
Accesses photo, music, movie, and document files.
74
CUSTOMIZING SETTINGS
PICTURE Settings
1 Press the SETTINGS button.
2 Use the , , , or
buttons to select PICTURE
and press the OK button.
3 Use the
PICTURE
ꔂ Move ꔉ OK
•• ꕊ Energy Saving : Minimum
•• Picture Mode
,
,
, or
button to set up the desired
item and press the OK
button.
--To return to the previous
menu, press the
button.
: Standard
•• Contrast 100
•• Brightness 50
•• Sharpness 20
•• Colour
•• Tint
55
0
R
4 Press the EXIT button when
completed.
The available picture settings are described as follows.
Menu
Energy
Saving
Description
Reduces power consumption by adjusting peak
screen brightness.
Mode
Minimum/
Applies the pre-set Energy Saving
Medium/
mode.
Maximum
G
CUSTOMIZING SETTINGS
75
Menu
Description
Picture Mode
Selects the picture mode optimized for the viewing
environment or the program.
You can also customize advanced options for each
mode.
Mode
Maximizes the visual effect of video.
Vivid
Heightens contrast, brightness, and
sharpness to display vivid images.
Displays images in standard levels of
Standard
contrast, brightness, and sharpness.
Cinema
Optimizes the image for a movie.
Optimised picture mode for football
matches. The pitch and kits are
Soccer
presented in vibrant colours,
with crystal-clear images even for fast
movements.
Optimizes the image for playing games
Game
on fast-moving screens.
Menu for adjusting picture quality that
allows experts and amateurs to enjoy
the best projector viewing.
Expert1 /
--Expert mode is for picture tuning
Expert2
professionals to control and fine-tune
using a specific image. For normal
images, the effects may not be
dramatic.
Contrast
Adjusts the difference between bright and dark
regions of the screen.
Brightness
Adjusts the overall screen brightness.
Sharpness
Adjusts the sharpness of the borders between bright
and dark. Horizontal and Vertical Sharpness are
available only in Expert1 / Expert2.
Colour
Adjusts the intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Advanced
Control
Customizes the advanced settings.
76
CUSTOMIZING SETTINGS
Menu
Description
Picture Option
Sets optional settings.
Picture Reset
Resets values customized by the user.
Each picture mode is reset. Select the picture mode
you wish to reset.
Aspect Ratio
Resizes the picture.
Adjusts the picture quality of RGB input.
Option
Screen
Resolution
Available resolutions are 768
resolution (1024 x 768/ 1280 x 768/
1360 x 768, 60 Hz).
Auto
Config.
Provides optimized picture quality by
automatically calibrating the mismatch
of horizontal width and picture shake
caused by clashes between the
internal settings of the projector and
various PC graphic signals.
Position
Moves the image up/down/left/right.
Size
Changes the screen size.
Phase
Makes the picture look clear by
removing horizontal noise.
Reset
Restores all the settings to the factory
default.
CUSTOMIZING SETTINGS
77
Advanced Control
Menu
Description
Dynamic
Contrast
Adjusts contrast and colour to the optimal level
according to the screen’s brightness.
Dynamic
Colour
Adjusts colours for more natural-looking colours.
Colour
Gamut
Selects the range of colours that can be expressed.
• Standard: Displays the original colours of an input
signal regardless of the display features.
• Wide: Makes use of the display's rich colours.
Skin Colour
Skin colour spectrum can be separately set to
implement the skin colour as defined by the user.
Sky Colour
Sky colour is set separately.
Grass
Colour
Natural colour spectrum (meadows, hills, etc.) can be
separately set.
Gamma
Sets the gradation curve according to the output of the
picture signal in relation to the input signal.
* Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.
Expert Control
Menu
Description
Dynamic
Contrast
Adjusts contrast and colour to the optimal level
according to the screen’s brightness.
Colour Gamut
Selects the range of colours that can be expressed.
• Standard: Displays the original colours of an input
signal regardless of the display features.
• Wide: Makes use of the display's rich colours.
Edge Enhancer
Shows clearer and distinctive yet natural edges of
the video.
Expert Pattern
Patterns used for expert adjustment.
Colour Filter
Filters a specific colour spectrum in RGB colours to
fine-tune colour saturation and hue accurately.
78
CUSTOMIZING SETTINGS
Menu
Description
In Expert mode, you can customize the options of
each mode.
Colour
Temperature
Colour
Management
System
Gamma: Select 1.9, 2.2,or 2.4.
a. Method: 2 Points
--Pattern: Inner, Outer
--Points: Low, High
--Red/Green/Blue: The adjustment range for
each colour is from -50 to +50.
--Apply to all inputs: The values of the Colour
Temperature is applied to all the input modes.
b. Method: 20 Point IRE
--Pattern: Inner, Outer
--IRE (Institute of Radio Engineers) is the unit
indicating the size of a video signal and can be
set to 5,10,15, … 100. You can fine-tune for
each setting as shown below.
--Luminance: The adjustment range is 50 to
500.
--Red/Green/Blue: The adjustment range is -50
to +50.
--Apply to all inputs: The values of the Colour
Temperature is applied to all the input modes.
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow
colours. Allows an expert to adjust the tint using a
test pattern. Six colours (Red/Green/Blue/Cyan/
Magenta/Yellow) can be selectively adjusted without
affecting other colours. You may not see colours
change on a normal picture even after adjustment.
--Saturation Red/Green/Blue/Cyan/Magenta/
Yellow, Tint Red/Green/Blue/Cyan/Magenta/
Yellow, Luminance Red/Green/Blue/Cyan/
Magenta/Yellow:
The adjustment range is -30 to +30 each.
* Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.
CUSTOMIZING SETTINGS
79
Picture Option
Menu
Description
Noise Reduction
Reduces screen noise in the video.
MPEG Noise
Reduction
Eliminates noise generated while creating digital
picture signals.
Black Level
Adjusts the brightness or darkness of the screen
to suit the black level of the picture input using the
degree of darkness (black level) of the screen.
Real Cinema
Optimizes the screen for movie viewing.
Colour
Temperature
Adjusts the overall colour of the screen to suit your
preference.
Select Warm, Natural, Cool, or Medium.
80
CUSTOMIZING SETTINGS
AUDIO Settings
1 Press the SETTINGS button.
2 Use the , , , or
button to select AUDIO and
press the OK button.
3 Use the
,
,
, or
button to set up the desired
item and press the OK
button.
--To return to the previous
menu, press the
button.
AUDIO
•• Sound Mode
ꔂ Move ꔉ OK
: Standard
•• Sound Effect
•• Auto Volume
: Off
•• Sound Out
: Projector Speaker
•• DTV Audio Setting : Auto
•• AV Sync. Adjust
: Off
4 Press the EXIT button when
completed.
The available audio settings are described as follows.
Menu
Description
Sets the sound mode.
Mode
Sound
Mode
Standard
Suitable for all types of video.
News /
Music /
Cinema / Soccer /
Game
Sets audio optimized for a specific genre.
CUSTOMIZING SETTINGS
Menu
81
Description
The user can select various sound effects.
Mode
Clear
Voice II
Makes the voice from the projector crisp
and clear.
Virtual
Surround
LG’s proprietary audio processing
technology allows 5.1 channel-like
surround sound from two speakers.
• When Clear Voice II is set to on, Virtual
Surround cannot be selected.
Equalizer
Adjusts the volume to a level of your choice
using the Equalizer.
• Audio-band (100 Hz / 300 Hz / 1 kHz / 3 kHz / 10 kHz) can be adjusted from
-10 to 10.
• Reset: Resets voice options that the
user has changed.
Balance
Adjusts the balance of the left and right
speakers.
Reset
Initialize the applied effect under the
Sound Effect menu.
Sound
Effect
Auto
Volume
Automatically adjusts the volume level.
82
CUSTOMIZING SETTINGS
Menu
Description
Sets the audio output of the projector.
Mode
Projector
Speaker
Sound is output through the projector
speaker.
External
Speaker
(Optical)
Sound is output through the speaker
connected to the optical port.
• Digital Sound Out: Sets up Digital
Sound Output.
Sound is output through the Bluetooth
headset.
First, set Bluetooth to on.
Sound Out
Item
Bluetooth
DTV Audio
Setting
Search
Device
Search for the device to
connect to.
List of
registered
devices
Connected devices are
saved in the List of
registered devices. The
saved list of registered
devices can be displayed.
When an input signal comprises different audio signals,
this function allows you to select the audio type you want.
If set to Auto, the search order is HE-AAC → Dolby
Digital+ → Dolby Digital → MPEG and output is
produced in the first Audio Format found.
• This feature is available in certain countries only.
• If the selected Audio Format is not supported, another
Audio Format may be used for output.
CUSTOMIZING SETTINGS
Menu
83
Description
Synchronizes video and audio directly when they do not
match. If you set AV Sync. Adjust to On, you can adjust
the sound output (projector speakers or SPDIF) to the
screen image.
Mode
Projector
Speaker
Adjusts the synchronization of the sound
from the projector's internal speakers.
The + and - buttons allow the viewer to
synchronize the audio with the video.
External
Speaker
Adjusts how the sound is synced to
external speakers, such as an external
speaker connected to the digital audio
output port, LG audio device, projector
speaker, SPDIF, and headphone.
The + and - buttons allow the viewer to
synchronize the audio with the video.
Bluetooth
Adjusts the synchronization between the
video and the Bluetooth device sound.
--This feature is only available when a
Bluetooth device is connected.
--Audio sync may vary by manufacturer.
--When playing video and music from a
connected USB drive, AV Sync. Adjust
can also be adjusted using the Set
Audio. menu.
Bypass
Outputs broadcasting signals or the audio
of an external device without audio delay.
Audio may be output before video as it
takes time to process video input into the
projector.
AV Sync.
Adjust
84
CUSTOMIZING SETTINGS
SETUP Settings
1 Press the SETTINGS button.
2 Use the , , , or
button to select SETUP and
press the OK button.
3 Use the
,
,
, or
button to set up the desired
item and press the OK button.
--To return to the previous
menu, press the
button.
SETUP
ꔂ Move ꔉ OK
•• Auto Tuning
•• Manual Tuning
•• Programme Edit
4 Press the EXIT button when
completed.
The available setup settings are described as follows.
Menu
Description
Auto
Tuning
Automatically tunes the programmes.
1. Select Country where the projector is used.
Programme settings change depending on the
country you choose.
2. Initiate Auto Tuning.
3. Select Input Source of your choice.
4. Set Auto Tuning following screen instructions.
If Input Source is not connected properly, programme
registration may not work.
Auto Tuning only finds programmes that are currently
broadcasting.
If Lock System is turned on, a pop-up window will
appear asking for password.
Manual
Tuning
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal
quality can be checked.
For analogue broadcasting, you can set up station
names and use fine tuning (except for Satellite mode).
Normally fine tuning is only necessary if reception is
poor.
You can also adjust the frequency (kHz) and Bandwidth.
Programme
Edit
Edits the saved programmes.
Set as favourite programme, block/unblock programme,
skip programme etc. of the selected programme.
CUSTOMIZING SETTINGS
TIME Settings
1 Press the SETTINGS button.
2 Use the , , , or
button to select TIME and
press the OK button.
3 Use the
,
,
, or
button to set up the desired
item and press the OK button.
--To return to the previous
menu, press the
button.
TIME
85
ꔂ Move ꔉ OK
•• Clock
•• Off Time
: Off
•• On Time
: Off
•• Sleep Timer
: Off
•• Auto Off
: 60 min.
4 Press the EXIT button when
completed.
The available time settings are described as follows.
Menu
Description
Checks or changes the time while watching projector.
Mode
Clock
Auto
Synchronizes the projector clock to the digital
time information sent by the TV station.
Manual
Sets the time and date manually if the auto
setup does not correspond to the current
time.
Off Time /
On Time
Sets On/Off time.
Select Off on Repeat to discontinue On Time / Off Time.
• To use On Time / Off Time, set the current time
correctly.
• If you set both Off Time and On Time features to the
same time, the Off Time feature overrides the On Time
feature.
• Even when the On Time function is on, the projector
will turn off automatically in 120 minutes when no button
is pressed within that time.
Sleep
Timer
Turns off the projector after a preset number of minutes.
To cancel the Sleep Timer, select Off.
Auto Off
If there is no input signal or button press, the projector
automatically turns off after the preset time has elapsed.
86
CUSTOMIZING SETTINGS
WIRELESS Settings
1 Press the SETTINGS button.
2 Use the , , , or
button to select WIRELESS
and press the OK button.
WIRELESS
•• SCREEN SHARE
ꔂ Move ꔉ OK
: [PJTR][LG]PF1000U[0000]
•• Group
3 Use the
,
,
, or
button to set up the desired
item and press the OK
button.
--To return to the previous
menu, press the
button.
•• Channel
4 Press the EXIT button when
completed.
The available wireless settings are described as follows.
Menu
Description
The SCREEN SHARE displays the screen of the
connected device.
• You can check the SCREEN SHARE's ID.
Mode
Group
This is the group setting for each device
supporting the SCREEN SHARE feature.
When the wireless connection is weak
or unstable, adjust the group setting to
correct the problem.
Channel
You can change the channel used for
wireless connections.
• Search Channels: Select channel
searching methods.
--Auto: The projector searches for
available channels and automatically
selects the least used channel.
--Manual: You can select a channel
manually.
• Channel: This is shown when Search
Channels is set to Manual. It allows you
to specify a channel number to use.
SCREEN
SHARE
CUSTOMIZING SETTINGS
LOCK Settings
1 Press the SETTINGS button.
2 Use the , , , or
button to select LOCK and
press the OK button.
--To enter the LOCK menu,
enter the preset 4-digit
password. The initial
password is set as 0000.
LOCK
•• Set Password
•• Block Programme
•• Parental Guidance : Blocking Off
•• Input Block
•• Key Lock
,
,
, or
button to set up the desired
item and press the OK button.
--To return to the previous
menu, press the
button.
4 Press the EXIT button when
completed.
The available lock settings are described as follows.
Menu
ꔂ Move ꔉ OK
•• Lock System : Off
3 Use the
Set
Password
87
Description
Sets or changes projector password.
• The initial password is set as 0000.
: Off
88
CUSTOMIZING SETTINGS
Menu
Description
Locks the selected programme or external input.
First set Lock System to On.
Item
Block
Programme
Blocks programmes with content
inappropriate for children. Programmes
can be selected but the screen is blank
and the audio is muted. To watch a locked
programme, enter the password.
Parental
Guidance
This function operates according to
information from the broadcaster.
Therefore if the signal has incorrect
information, this function does not
operate. Prevents children from watching
certain adult TV programmes according
to the ratings limit set. Enter a password
to watch a blocked programme. Ratings
differ by country.
• This feature is available in certain
countries only.
Input Block
Block the input sources.
Lock
System
Key Lock
Locks control buttons on projector.
• Key Lock function remains intact even in case of power
outage or when the power cord is removed from the
wall socket.
• Key Lock function can only be set by remote control,
and not by the button on the projector.
• Even though Key Lock is set to on, projector’s buttons
can turn on the power.
CUSTOMIZING SETTINGS
89
OPTION 1 Settings
* The illustration of the menu may
differ from the actual screen on
the product.
1 Press the SETTINGS button.
2 Use the , , , or
OPTION 1
ꔂ Move ꔉ OK
•• Language(Language)
•• Country
: --
•• Disability Assistance
•• 3D Mode
button to select OPTION 1
and press the OK button.
•• Auto Input Search : Off
,
,
, or
button to set up the desired
item and press the OK
button.
--To return to the previous
menu, press the
button.
•• Factory Reset
3 Use the
•• Data Service
: Teletext
•• DivX(R) VOD
•• Mode Setting
: Standard
4 Press the EXIT button when
completed.
The available option 1 settings are described as follows.
Menu
Description
Language
Selects a desired menu language.
ZIP Code
This function sets your area as the ZIP Code.
• This feature is available in certain countries only.
Country / Region
[Depending on country]
Sets the country/region that the projector uses.
Projector settings are changed according to the
broadcast environment of the selected country/region.
• If the country/region setting is changed, the Auto
Tuning information screen may appear.
• In a country/region that Digital broadcasting
regulation isn’t fixed, some DTV functions may
not work depending on digital broadcasting
circumstances.
• If the country/region setting is set to “--”, European
terrestrial digital standard broadcasting programmes
are available, but some DTV functions may not work
properly.
90
CUSTOMIZING SETTINGS
Menu
Description
Disability
Assistance
Audio commentary or subtitles are provided for those
who are hard of hearing or visually impaired.
• This feature is available in certain countries only.
• Hard of Hearing: This function is used for the
hearing impaired. If it is set to on, the subtitle is
displayed by default.
• Audio Description: This function is for the blind,
and provides explanatory audio describing the
current situation in a TV programme in addition to
the basic audio. When Audio Description is selected
On, basic audio and Audio Description are provided
only for those programmes that have Audio
Description included.
Hard of
Hearing
This function is used for the hearing impaired.
If it is set to on, the subtitle is displayed by default.
• This feature is available in certain countries only.
Adjusts various aspects of 3D imaging.
3D Mode
Mode
3D Picture
Correction
Switches left/right images of 3D video.
Auto Input
Search
Automatically searches for and displays the input
signal type when it is received. It is available only with
external inputs (RGB, HDMI, AV, and Component).
Additional
Audio
Selection
Audio commentary or subtitles are provided for those
who are hard of hearing or visually impaired. (Only
DTV)
• This feature is available in certain countries only.
• None: Selects default Audio.
• Audio Description: [For the visually impaired]
Selects the preferred default Audio combined with
Visual Impaired Audio.
• Clean Audio: [For the hearing-impaired] Selects the
preferred Clean Effect and Hearing Impaired Audio.
• Spoken Subtitles: [For the visually impaired]
Selects the preferred Visual Impaired Audio only.
CUSTOMIZING SETTINGS
91
Menu
Description
Data Service
This function allows users to choose between MHEG
(Digital Teletext) and Teletext if both exist at the same
time.
If only one of them exists, either MHEG or Teletext is
enabled regardless of which option you selected.
• This feature is available in certain countries only.
DivX(R) VOD
Sets DivX related settings.
Factory
Reset
All stored information is deleted and projector settings
are reset.
• Projector turns itself off and back on, and all settings
are reset.
• When Lock System is in place, a pop-up window
appears and asks for password.
• Do not turn off the power during initialization.
Mode Setting
Selects Standard or Store Demo.
When in use in home, please select Standard.
Store Demo mode is for store display.
92
CUSTOMIZING SETTINGS
OPTION 2 Settings
1 Press the SETTINGS button.
2 Use the , , , or
OPTION 2
ꔂ Move ꔉ OK
button to select OPTION 2
and press the OK button.
•• Edge Adj
•• Auto Keystone(Vertical)
: Off
,
,
, or
button to set up the desired
item and press the OK
button.
--To return to the previous
menu, press the
button.
•• PJT Mode
: Front
•• High Altitude
: Off
•• Blank Image
: Blue
•• Auto Power
: Off
3 Use the
•• Self Diagnosis
4 Press the EXIT button when
completed.
The settings for OPTION 2 are described as follows.
Menu
Edge Adj
Auto
Keystone
(Vertical)
PJT Mode
Description
Edge Adj adjusts the right, left, top, and bottom width of
the projected image if the projected image and screen
are not perpendicular to each other due to a tilted screen.
Auto Keystone(Vertical) provides a rectangular screen
image by automatically adjusting the Keystone number
when there is a trapezoidal screen image caused by
tilting of the projector.
Item
On
Automatically adjusts the Keystone number.
Off
Manually adjusts the Keystone number.
This function turns the projected image upside down or
flips horizontal.
• Select Rear when projecting from the back of the
transparent screen purchased separately.
• Select Front Ceiling when installing the product on the
ceiling.
• When the PJT Mode is Rear Ceiling/Front Ceiling,
the left/right of the speaker changes automatically.
CUSTOMIZING SETTINGS
Menu
Description
High
Altitude
If the projector is used at an altitude higher than 1200
metres, turn this on.
Otherwise, the projector may overheat or its protection
function may be activated. If this happens, turn the
projector off and then on again after waiting for several
minutes.
Blank
Image
Selects a background for blank image.
Makes the projector turn on automatically when the
adaptor plug is inserted.
Auto
Power
Self
Diagnosis
Item
On
When the AC/DC plug is connected to the
projector, it turns on automatically.
Off
When the AC/DC plug is connected to the
projector, it goes into standby mode.
Troubleshoots functional problems that can arise while
using the product.
* When the input is set to SCREEN SHARE, these features are
disabled and cannot be used: Edge Adj, PJT Mode, and Auto
Keystone(Vertical).
93
94
CONNECTING DEVICES
CONNECTING DEVICES
You can connect various external devices to the projector.
Computer/Notebook

USB
Video/DVD
Digital Device
LG Audio Device
Headphone
Games Console
Mobile Phone
HDMI - Page 95
Composite (AV) - Page 96
Component - Page 96
RGB - Page 99
USB Device - Page 45
Headphone - Page 101
Digital Amp - Page 101
Mobile Phone (MHL) - Page 103
CONNECTING DEVICES
Connecting to HD
Receiver, DVD, or
VCR Player, External
Devices
Connect an HD receiver, DVD,
VCR player, or external devices
to the projector and select an
appropriate input mode.
HDMI Connection
With an HDMI cable, you can enjoy
high quality picture and sound.
Using a HDMI cable, connect the
port of the projector to
the HDMI output port of the device
to connect. Both video and audio
are output at the same time. You
can also use the
.
Press the INPUT button on the
remote control to select HDMI.
You can connect with any HDMI
input port.
HDMI to DVI Connection
Using an HDMI to DVI cable,
connect the projector's
port to the DVI OUT port.
To output audio, use an audio
cable for connection. You can also
use the
.
Press the INPUT button on the
remote control to select HDMI.
You can connect with any HDMI
input port.
Optional
Extras
AUDIO OUT
Optional Extras
95
Not
provided
DVI OUT
96
CONNECTING DEVICES
AV Connection
Component Connection
Connect the output ports of an
external device and the AV IN
ports of the projector using an AV
cable. Press the INPUT button on
the remote control to select AV.
Check whether cables of the same
colour are connected properly.
You can enjoy a video by
connecting the component port
of an external device to the
COMPONENT IN port of the
projector. Press the INPUT button
on the remote control to select
Component. Check whether
cables of the same colour are
connected properly.
A)
Accessories
White
Red
White
Red
Red
Yellow
Red
Blue
Red
Blue
Red
White
Green
White
Yellow
Not
provided
Green
Yellow
Accessories
Optional
Extras
Red
White
Yellow
Not
provided
Not
provided
Red
White
Red
Blue
Green
CONNECTING DEVICES
97
Connecting a PC
B)
The projector supports Plug &
Play. Your PC will automatically
detect the projector and requires
no driver installation.
HDMI Connection
Accessories
White
Red
Yellow
Green
Blue
Red
Not
provided
Not
provided
Using an HDMI cable, connect the
port of the projector to
the HDMI output port of your PC.
Both video and audio are output at
the same time. You can also use
the
.
Press the INPUT button on the
remote control to select HDMI.
You can connect with any HDMI
input port.
Red
White
Red
Blue
Green
Optional Extras
98
CONNECTING DEVICES
HDMI to DVI Connection
Using an HDMI to DVI cable,
connect the projector's
port to the DVI OUT port.
To output audio, use an audio
cable for connection. You can also
use the
.
Press the INPUT button on the
remote control to select HDMI.
You can connect with any HDMI
input port.
Optional
Extras
AUDIO OUT
Not
provided
DVI OUT
NOTE
• It is recommended to use
an HDMI connection for the
best image quality.
• Depending on the graphics
card, DOS mode video may
not work if a HDMI to DVI
Cable is in use.
• In PC mode, there may be
noise associated with the
resolution, vertical pattern,
contrast, or brightness. If
noise is present, change
the PC output to another
resolution, change the
refresh rate to another rate,
or adjust the brightness and
contrast on the PICTURE
menu until the picture is
clear.
• The synchronization input
form for Horizontal and
Vertical frequencies is
separate.
• Depending on the graphics
card, some resolution
settings may not allow the
image to be positioned on
the screen properly.
• If you are using DVI out from
a PC, you have to connect
analog audio separately.
• When using the HDMI/DVI
cable, Single link only is
supported.
CONNECTING DEVICES
99
RGB Connection
Connect the PC output and the
PC video input port of the projector
with the RGB cable.
For audio signal, connect the PC
and the projector with an optional
audio cable.
Press the INPUT button on the
remote control to select RGB.
Optional
Extras
Optional
Extras
Accessories
Red
White
Yellow
Red
White
Optional
Extras
RGB OUT (PC)
You can connect the audio cable
without using a gender as shown
in the illustration above
Not
provided
AUDIO OUT
AUDIO OUT
RGB OUT (PC)
100 CONNECTING DEVICES
Connecting a Laptop
You can connect the projector to a
laptop to use various functions.
HDMI Connection
Using an HDMI cable, connect
the
port of the projector
to the HDMI output port of your
laptop. Both video and audio are
output at the same time. You can
also use the
.
Press the INPUT button on the
remote control to select HDMI.
You can connect with any HDMI
input port.
Optional Extras
The table below shows examples
of switching the output. For
more information, refer to the
External Output, Connecting to
an External Monitor, or similar
sections of the owner's manual of
your computer.
Brand
Switching
Output
NEC
[Fn]+[F3]
Panasonic
[Fn]+[F3]
Toshiba
[Fn]+[F5]
IBM
[Fn]+[F7]
Sony
[Fn]+[F7]
Fujitsu
[Fn]+[F10]
LG
[Fn]+[F7]
Samsung
[Fn]+[F4]
Macintosh
Adjust the control
panel to enable
mirroring after
start-up.
CONNECTING DEVICES
101
Connecting
Headphones
Connecting a Digital
Amp
You can listen to the audio through
a headphone.
Using an optical cable, connect
the digital audio input port of
a digital amp to the OPTICAL
DIGITAL AUDIO OUT port of the
projector. The output of an amp
with a digital converter must be set
to the desired audio format. When
using a HDMI cable to connect a
home theatre or when connecting
an optical output to an external
audio device, set Sound Out to
External Speaker (Optical) as
shown below. If a projector, home
theatre, or the speaker of an
external audio device is operating
at the same time, there will be an
echo.
Not provided
Optional Extras
102 CONNECTING DEVICES
NOTE
• Refer to the user manual of
the audio device to connect.
• When connecting this
product to other devices,
make sure to turn off and
unplug all the devices.
• The audio output of this
product has wide-ranging
audio bandwidth, so the
receiver volume must
be adjusted properly.
Speakers can be damaged
by unexpected high
frequencies.
• Connecting the OPTICAL
DIGITAL AUDIO OUT port
of the projector to the digital
audio input port of a digital
amp and the audio input port
of the projector to the analog
audio output port of the
digital amp can cause sound
oscillation due to the closed
loop. Remove one of the two
connections to prevent this.
(This also applies to home
theatre devices.)
CONNECTING DEVICES
103
Using the Mirroring Function of a Mobile
Phone
MHL Connection
The Mobile High-definition Link (MHL) is an interface that can connect a
mobile phone to the projector and play video and audio from the mobile
phone through the projector.
This only applies to products with a HDMI input that supports MHL.
(To find out whether your device is MHL-certified, please contact your
device manufacturer.)
For MHL support, check the
port.
Use a dedicated cable for MHL.
Optional Extras

NOTE
• When you connect a mobile phone to the
port, you
can see the mobile phone screen through a projector.
--This only applies to mobile phones that support MHL.
--You can use the remote control for some applications.
• Disconnect the MHL cable from the projector when:
--The MHL function is disabled.
--Your mobile device is fully charged in standby mode.
104 MAINTENANCE
MAINTENANCE
Clean your projector to keep it in optimal condition.
Cleaning
Cleaning the Lens
If there is any dust or staining on the lens surface, you must clean the lens.
Use an air spray or a cleaning cloth to clean the lens.
To remove dust or stains, use an air spray or apply a small amount of
cleaning agent onto a swab or soft cloth to lightly rub the lens.
Please be aware that liquid may flow into the lens if the product is sprayed
directly onto the lens.
Cleaning the Projector Case
To clean the projector case, first unplug the power cord.
To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to
polish the lens.
Do not use alcohol, benzene, thinners, or other chemicals, which may
damage the case.
SPECIFICATIONS
SPECIFICATIONS
Model
PF1000U (PF1000U-MA)
Resolution (Pixel)
1920 (Horizontal) × 1080 (Vertical)
Aspect Ratio
16:9 (Horizontal:Vertical)
Panel size (mm)
11.896
Projection
Distance (Video size)
0.413 m to 0.686 m (152.4 cm to 254 cm)
Ratio of Upward
Projection
125 %
Working range of
the remote control
6m
Power
AC 100 - 240 V, 50 Hz/ 60 Hz
AC-DC Adaptor
19 V
5.79 A
(Adaptor Input 100 - 240 V @ 50/60 Hz)
Audio Output
3W+3W
Video Input
NTSC M / PAL-B, D, G, H, I / PAL M / PAL N /
PAL 60 / SECAM
Television system
DTV- DVB-T/T2 / Analog – PAL-B/B, B/G, I,
SECAM-B/G
Programme
coverage
VHF, UHF
External antenna
impedance
75 Ω
Height (mm)
127.6 (without foot) / 128.8 (with foot)
Width (mm)
131.4
Depth (mm)
309 (without tuner) / 315.8 (with tuner)
Weight (kg)
1.9
USB Device
5 V, 0.5 A (Max.)
105
106 SPECIFICATIONS
Temperature
Operation
environment
Operation
0 °C to 40 °C
Storage
-20 °C to 60 °C
Relative humidity
Operation
0 % to 80 %
Storage
0 % to 85 %
* Contents in this manual may be changed without prior notice due to
upgrade of product functions.
Supported RGB-PC/HDMI(PC) Mode
Resolution
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
640 x 350
31.468
70.09
720 x 400
31.469
70.08
640 x 480
31.469
59.94
60.31
800 x 600
37.879
1024 x 768
48.363
60.00
1152 x 864
54.348
60.053
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1920 x 1080
67.5
60
• If an invalid signal is input into the projector, it will not be displayed
properly on the screen or a message such as No Signal or Invalid
Format will be displayed.
• The projector supports the DDC1/2B type as the Plug & Play function
(Auto-recognition of PC monitor).
• PC synchronization signal types supported: Separate type
synchronization.
• In PC mode, 1920 x 1080 (1080p) is recommended for the best picture
quality.
SPECIFICATIONS
107
Supported HDMI/DVI-DTV Mode
Resolution
480p
576p
720p
1080i
1080p
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
31.47
60
31.47
59.94
31.50
60
31.25
50
45.00
60.00
44.96
59.94
37.5
50
33.75
60.00
33.72
59.94
28.125
50
67.500
60
67.432
59.939
27.000
24.000
26.97
23.976
33.75
30.000
33.71
29.97
56.25
50
• To provide the best picture quality, a 1920 x 1080 (1080p) resolution is
recommended.
Component Port Connecting Information
Signal
Component
480i / 576i
O
480p / 576p
O
720p / 1080i
O
1080p
O
(50 Hz / 60 Hz only)
108 SPECIFICATIONS
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost
of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date
on which you purchased the product.
SYMBOLS
SYMBOLS
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
109
The model and serial numbers of the projector are
located on the back or on the side of the projector.
Record them below should you ever need service.
MODEL
SERIAL
Download PDF