LG | GB-306NP | LG GB-306NP Owner’s Manual

Please read this manual carefully before operating
your set and retain it for future reference.
P.No.: MFL67783505
Table of Contents
Important Safety Instruction
Identification of Parts
Control panel
Temperature Control
Express Freeze
Eco Mode
Door Alarm
"LOCK" (for models with LED display)
Removal and installation of detachable
glass shelf
Foodstuff Storage
Care and Maintenance
Trouble Shooting
To Reverse the Doors
Smart Diagnosis
Removal and installation of drawers
in refrigeration compartment
Removal and installation of drawers
in freezing compartment
Storing Food
General Information
During Move
Before switching on refrigerator operation features
Anti-Condensation Pipe
Trouble Shooting
How to Reverse the Doors
Smart Diagnosis (Option)
The model and serial number are found on the rear of
this unit. This number is unique to this unit and not
available to others. You should record requested
information here and retain this guide as a permanent
record of your purchase. Staple your receipt here.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Important Safety Instruction
This guide contains many important safety messages.
Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety
messages that inform you of hazards that can kill or hurt
you or others or cause damage to the product. All safety
messages will be preceded by the safety alert symbol and
the hazard signal word DANGER, WARNING, or
CAUTION. These words mean:
Important safety instructions must be
followed carefully. If not, this can result
in serious injury or death.
WARNING Important safety instructions must be
followed carefully. If not, this can result
in serious injury or death.
Indicates an imminent hazard, which if
not avoided can result in personal injury
or damage to the product.
Before it is used,this refrigerator must be properly installed
and located in accordance with the installation instructions
in this document.
All safety messages will identify the hazard, tell you how
to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Important Safety Instruction
To reduce the risk of fire, electric shock, or injury to
persons when using your product, basic safety
precautions should be followed, including the
following. Read all instructions before using this
1. When connecting the power
A dedicated outlet should be used.
• Using several devices at one outlet
may cause fire.
• If ELCB (Earth leakage circuit breaker) is
tripped, food inside fridge will spoil.
Do not allow the power plug to face upward or to
be squeezed at the back of the fridge-freezer.
Water may flow into the socket and
cause fire and electric shock.
Do not allow the power cord to be bent or crushed by
the refrigerator or any other heavy object.
This can damage the power cord and
cause fire and electric shock.
Do not extend or modify the length of the power
This can cause electric shock or fire due
to non electrical compliance.
Unplug the power plug when cleaning, handling or
replacing the interior lamp of the fridge-freezer.
• Failing to do this may cause electric
shock or injury.
• When replacing the interior lamp of
the fridge-freezer, make sure that any
rubber is not removed from the socket,
and that the socket is not altered in any way.
Should this appliance be fitted with LED internal lighting,
please call the manufacturer for service in the event of a
problem with the LED lighting.
Important Safety Instruction
Do not pull out the cord or touch the power plug
with wet hands.
• It may cause electric shock or injury.
Remove water or dust from the power plug and
insert it with the ends of the pins securely
Dust, water or an unsecure connection
to the power outlet may cause fire or
electric shock.
Ensure that a proper earthed power
outlet is used.
A poorly earthed connection or power
outlet may cause malfunction and
electric shock.
Do not operate the refrigerator if the plug or lead
is damaged, or the plug is loose in the power outlet.
This may cause electric shock or a short
circuit and may cause fire.
2. When using the fridge-freezer
Do not place any heavy or dangerous objects
(including contained fluids, vases or cups) on top
of the refrigerator.
Objects can fall or spill and cause injury,
fire or electric shock if they come into
contact with the power cord.
Do not allow any persons to climb, swing or rest
on the doors, or door shelves, or any other part of
the refrigerator.
It can cause the unit to fall or tip over
and cause serious injury.
Important Safety Instruction
Do not install the fridge-freezer in an outdoor sheltered
area or where it can be exposed to humidity or wet
weathering or direct sunlight.
Water penetration and deterioration to
insulation of electric parts may cause
electric shock or fire.
Do not store inflammable materials such as solvents,
ether,benzine, alcohol, medicine, LP Gas, aerosol cans,
and cosmetics near or in the refrigerator.
They can cause an explosion or fire.
Do not place a lit candle with in the fridge-freezer to
deodorize. Do not use a drier to dry the inside, nor light
a candle to remove odor.
It may cause explosion or fire.
Do not store any medicine in the refrigerator UNLESS
specified by the medicine instructions. Do not store
scientific materials, chemicals or solutions
inside the refrigerator. This refrigerator
is intended for domestic food storage
applications. It should not be used
for mobile applications or commercial
If gas is leaked, do not touch the fridge-freezer or
the outlet and ventilate the room immediately.
Static or sparks could trigger an explosion of fire and
cause burns.Because this fridge-freezer uses natural gas
(isobutene, R600a) as the environmentfriendlyrefrigerant, even a small amount
(80~90g) is combustible.If there is a gas
leak as a result of severe damage during
delivering, installing or using the fridge-freezer,
any spark may cause fire or burn.
Do not use any combustible sprays near the fridge-freezer.
Do not store explosive substances such
as aerosol cans with a flammable
propellant in this appliance.
It may cause fire.
Important Safety Instruction
Avoid placing the refrigerator near any heating devices
or sources.
It may cause fire.
If fridge has been submerged in water , do not plug
in or turn it on. This may cause electric shock or fire.
It should be checked by a qualified
person before plugging it in.
Do not spray water on the inside or outside fridge
surface, and DO NOT clean the refrigerator with
benzine, thinners or other hazardous chemicals.
Doing so can cause corrosion, odour
contamination, fire and electric shock.
Unplug the power plug when cleaning,
handling or replacing the interior lamp
(were fitted) of the fridge-freezer.
It may cause electric shock or injury.
When replacing the interior lamp of the
fridge-freezer, make sure that the rubber
ring for preventing a spark
within the socket is not taken off. If the
unit has LED internal lighting, call the manufacturer for service
in the even that it has malfunctioned. do not attempt to
remove the LED lighting module..
In case of a severe electrical storm,
remove the power cord from the
power outlet until the storm eases and
avoid opening the doors during that time.
There is a danger of electric shock or fire.
Do not place flower vase, cup, cosmetics,
medicine or any container with water on
the fridge-freezer.
It may cause fire, electric shock or injury if
they spill.
Upon opening or closing of the door,
unstable objects may spill or, fall, and
result in injury.
It may cause fire, electric shock or
Important Safety Instruction
If any strange smell or smoke is detected from
the fridge-freezer, disconnect the power plug
immediately and contact an LG Authorised Service
Do not allow any person except qualified technicians
to repair, disassemble, or alter the refrigerator.
Not doing so could cause a malfunction,
fire and possible electric shock.
Do not use the fridge-freezer for non-domestic
purposes (storage of medicines or testing materials etc. ).
It must be used for domestic food
storage applications only. Doing
so may cause a fire, electric shock
and other unexpected hazards.
When disposing the fridge-freezer, remove the
doors and power cord to prevent
potential serious injury and saftey
hazards to children and others.
Install the fridge-freezer on a solid and level floor.
Installing it in an unstable place may
cause it to fall resulting in serious
injury and damage to the refrigerator.
The refrigerator's stability can be
checked by opening and closing the door.
Important Safety Instruction
Do not put hands or other objects into the rear
service panel for any reason.
Doing so can cause serious injury,
malfunction, fire and electric shock.
When you want to dispose the fridge-freezer,
contact your local council. They may
be able to assist you with the
Avoid contact of fats and oils
(including vegetable) onto plastic
parts of the refrigerator.
This causes the plastic to discolour
and weaken.
Violating this direction may cause injury or damage
to house and furniture. Always be careful, please.
Do not touch food or containers in
the freezer with wet hands.
It may cause frostbite.
If the refrigerator requires disconnection from the
mains for any reason, please wait 5
minutes before reconnecting to avoid
any direct malfunction.
After reconnecting, the compressor will
then operate after a further 3 minutes.
Do not put bottles or cans in the freezer.
The contents may freeze causing them
to shatter or split.
Do not remove the power plug from the power
outlet by pulling it from the cord. It could
case damage to the cord,electrical short
circuit,and electric shock.
The power outlet should be easily accessible in
the event of necessary quick disconnection.
When one door of the refrigerator is closed abruptly,
another door may open, this is normal as the
10 refrigerator compartments are connected by air ducts.
Important Safety Instruction
Do not install the fridge-freezer in a wet place or
a place which water or rain splashes
such as an outdoor sheltered area.
Deterioration of the insulation of electric
parts may cause electric leakage or
electric shock.
Do not insert the hands into the bottom of the
The iron plate of the bottom may
cause injury.
Carry the fridge-freezer with the handle bar at the
bottom of the front and the top of the rear.
Otherwise, your hands could slip
and be injured.
Because opening or closing the door of the fridgefreezer may cause injury to the person around it, be
careful, please.
Opening or closing the door may
cause feet or hands to be caught
in the door hinges, or child to be
hurt by the door edge.
Do not put any living animal in the
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
Important Safety Instruction
• This fridge-freezer must be properly installed and
located in accordance with the Installation
Instruction before it is used.
• Never unplug your fridge-freezer by pulling on the
power cord. Always grip plug firmly and pull straight
out from the outlet.
• When moving your appliance away from the wall, be
careful not to roll over or damage the power cord.
• After your fridge-freezer is in operation, do not
touch the cold surfaces in the freezer compartment,
particularly when hands are damp or wet. Skin may
adhere to these extremely cold surfaces.
• Pull out the power plug prior to cleaning the fridgefreezer.
Never damage, serverely bend, pull out, or twist the
power cord because power cord damage may cause a
fire or electric shock.
Never place glass products in the freezer because they
may be broken when their inner contents are frozen.
• Do not directly spray water inside or outside the
This can cause an electrical hazard, electric shock or fire.
• Do not insert the power plug with wet hands.
You may receive an electric shock.
• Do not put a container filled with water on top of
the appliance.
If the water spills on to any electrical parts, it may lead
to fire or electric shock.
• Do not install the fridge/freezer in a damp place,
where it could be splashed with water.
Wet insulation, or electrical parts may cause an
electric shock or fire.
Important Safety Instruction
• Do not disassemble, repair or alter the appliance.
It may cause fire or abnormal operations, which may
lead to injury.
• Pull the power plug out of the socket before
replacing the interior lamp (if fitted) in the refrigerator.
If the refrigerator has LED lighting, call the manufacturer
for service in the event that it malfunctions. do not remove
the LED module.
Otherwise, there is a risk of electric shock.
It may cause electric shock or fire.
Do not modify or
extend the Power
Cord length
Don’t Use on
Extension Cord
If possible, connect the fridge-freezer to its own individual
electrical outlet to prevent it and other appliances or
household lights from causing an overload.
The supply plug of the refrigerator-freezer should be
placed in easy accessible position for quick disconnection
in emergency.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
Accessibility of
Supply Plug
Supply Cord
Risk of child entrapment.
Before you throw away your old refrigerator or freezer:
Take off the doors.
Leave the shelves in place so that children may not easily
climb inside.
Don't store
Don't store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by providing
an escape wire for the electric current. In order to prevent
possible electric shock, this appliance must be grounded.
Improper use of the grounding plug can result in an
electric shock. Consult a qualified electrician or service
person if the grounding instructions are not completely
understood, or if you have doubts on whether the
appliance is properly grounded.
Important Safety Instruction
• If the wall socket is loose, do not insert the power
It may cause electric shock or fire.
• Never unplug your refrigerator by pulling on the
power cord. Always grip plug firmly and pull it
straight out from the outlet.
You may disconnect a wire and cause a short circuit.
• Do not use a wet or damp cloth when cleaning the
plug. Remove any foreign matter from the power
plug pins.
Otherwise, there is a risk of fire.
• Do not put your hands into the bottom area of the
Any Sharp edges may cause personal injury..
• After unplugging the appliance, wait for at least
five minutes before plugging it again to the wall
Abnormal operation of the freezer may cause material
• If the appliance is not to be used for a long time,
pull out the power plug.
Any deterioration in the insulation may cause fire.
• Do not let children touch or play with the control
panel on the front of the appliance.
• The refrigerant used in fridge/freezer and the
gases in the insulation material require special
disposal procedures. Ensure that none of the pipes
on the back of the appliances are damaged prior
to disposal.
Identification of Parts
Universal section
(not in all models)
Section for dairy products
(not in all models)
(not in all models)
LED lamp
Egg tray
Door baskets
Removable glass shelf
refrigeration system
Vitamin Plus system
(not in all models)
Drawer for
vegetables and fruits
Separator for bottles
(not in all models)
Door basket for 2L bottles
Separator for food items
(not in all models)
Ice tray
Drawers of
freezing compartment
Height-adjustable front foot
If you find some parts or accessories missing from
your unit, they may be parts only used in other models.
• Install the limit stops to the upper corners on the rear
wall of the refrigerator as shown in Fig.1. The stops
are supplied in the door basket inside the refrigeration
• Choose a suitable place. Locate the refrigerator in a
place convenient for its use;
• The refrigerator is not a built-in appliance. Free space
not less than 5 cm should be provided from above,
from its rear and side faces for air circulation and
reduction of power consumption. Fig.2;
• Do not install the refrigerator near heat sources and
in a zone exposed to direct sunlight or high humidity;
• Make sure that electrical voltage indicated in the manual
meets the parameters of your mains voltage. it should only
be connected to a town mains supply.
• Do not remove the round stickers on the rear side of
the refrigerator. They have a decorative function
closing the fabrication holes;
• To exclude vibration, check the refrigerator installation
using a level. If necessary, turn the adjustable front feet to
compensate irregularity of the floor.
To raise the front part of the refrigerator, turn the
adjustable front feet counter-clockwise (
) to lower it –
turn them clockwise (
• This appliance is intended to be used in household and
similar applications such as staff kitchen areas ,
offices and other working environments;
and by clients in hotels, motels and other residential
type environments; bed and breakfast type environments;
it is not intended for mobile or commercial applications.
• Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance.
• To ensure proper air circulation around the fridge -freezer,
please maintain sufficient space on both the sides as well
as top and maintain at least 2 inches (5cm) from the rear wall.
• Before use, carefully wash the refrigerator;
• Install the removable parts, such as ice tray,etc. to the
appropriate places as it is necessary to prevent possible damages
during transportation;
• Insert the power cord plug to the power outlet. Do not power
other electric appliances from the same outlet.
When your fridge-freezer is installed, allow it 3-4 hours to
stabilize at normal operating temperature prior to filling
it with fresh or frozen foods.
If power plug is disconnected, allow 5 minutes delay
before restarting.
Your fridge-freezer is now ready for use.
Figure 1. Installation of limit stops
Figure 2. Installation of refrigerator to wall
The limit stops are located in the door basket of the
refrigeration compartment.
They should be installed to get higher operational efficiency
of the refrigerator.
External light-emitting-diode (LED) display
Temperature control in
freezing compartment
Express Freeze/
Economy mode
Temperature control in
refrigeration compartment
LED display lock button
Door alarm on/off button
Internal display
Express Freeze
Temperature control in
freezing compartment
Temperature control
Economy mode
in refrigeration compartment
The initial temperature in the refrigeration and freezing compartments is
3 °C and -20 °C, respectively.
If you wish, you can change it by pushing the temperature control button
of the appropriate compartment.
External LED display
Internal LED display
Temperature indicated on the LED display is a target value,
since actual temperature inside the refrigerator varies
depending on intensity of exposure to external factors, such
as temperature of placed food items and door opening frequency.
The refrigerator may take up to 3 days to settle into a cooling
pattern after initially installed. Please readjust the temperature
as above if necessary after using the refrigerator for 2 ~ 3 days.
This function is used when you want to freeze the foods quickly.
Press the ‘EXPRESS FREEZE ' button once, and then the Express
freezer operation will start and the indicator will be on.
The Express Freeze operation takes about 24 hours. When its operation
ends, it automatically returns to the previous temperature setting.
If you want to end the Express freeze operation manually at any time,
press the ‘EXPRESS FREEZE ’ button once more, and the indicator
will go out, and the Express freeze operation stops and the refrigerator
will return to the previous temperature setting.
External LED display
Internal LED display
Economy Mode minimises power consumption by setting the Fridge and
Freezer temperatures to the target temperatures used is the Australian/
New Zealand refrigerator performance standard AS/NZS 4474.1.
Turning down the temperatures to a cooler setting uses more electricity
and increases the running cost.
Push the “EXPRESS FREEZE /Economy mode” button twice
(on the external display)or the “Economy mode” button once
(on the internal display) to activate Economy mode.
The indicator ECO MODE will light, repeated pushing of the button will
deactivate the Economy mode.
External LED display
Internal LED display
In Economy mode the external display is switched to energy
conservation mode – only the “LOCK” indicator will light when activated.
When the “Economy mode” is activated the temperature setting buttons
are deactivated.
• If the refrigerator door is opened for some time (30 sec),
the door alarm will sound.
• You can enable and disable the door alarm by pushing
the "ALARM" button (not on all models);
• If the alarm continues to sound even after closure of the door, contact
the service center.
External LED display
(for models with LED display)
• When the "LOCK" button is activated, other buttons are inoperative;
• To lock/unlock the refrigerator display, push the "LOCK" button and
hold it for 3 seconds.
In the event of power cut off, the mode settings are kept.
The display has a self-test function.
If the refrigerator has a failure, the buttons become inoperative and the
indicator shows the error code. In this case, do not switch off the power
and immediately contact an authorised Service provider.
If you switch off the refrigerator, the error will reset and also be difficult
for the technician to diagnose.
To remove a shelf from the refrigerator, first slightly raise it (1) and then pull (2).
Improper removal may result in damage of internal parts in the refrigerator.
To install a shelf to the refrigerator, proceed in the same way: first raise the
front edge of the shelf (3) and then locate it into the refrigerator (4). Improper
installation may result in damage of internal parts in the refrigerator.
To remove the lower drawer from the refrigeration compartment,
proceed as follows:
• Remove the lower basket from the door by gently raising the basket;
• Pull the drawer out as far as it will go, then raise the front and continue
to pull out.
• Raise the drawer cover by the front part and pull to remove it;
• To install the drawer back, proceed in the reverse sequence.
Improper removal and installation may result in damage of internal
parts in the refrigerator.
Always empty the drawers before removing them.
To remove any drawer of the freezing compartment, proceed as follows:
1. Pull the drawer all the way out as far as it will go.
2. Raise it at the front and continue to pull it out.
To install any drawer back into the freezing compartment, proceed in the
reverse sequence:
1. Place the drawer onto the guides at an angle 45°;
2. Lower the front part of the drawer in parallel to the guides as you
push it in.
3. Push the drawer all the way in.
Do not apply excessive force to remove the drawers and shelves – this
may result in damage of the refrigerator.
The warranty does not cover mechanical damages (cracks, shears,
dents, scratches, chips,etc.) caused by violation of the
refrigerator storage,transportation, operation, and maintenance instructions,
and by application of excessive force.
Do not apply excessive force to remove the drawers and shelves – this
may result in damage of the refrigerator.
Fill the ice tray with water and place
it to the freezing compartment.
If ice cubes are required as soon as possible,
activate the "QUICK FREEZE" function.
To remove ice cubes, hold the tray on ends
and slightly bend it.
To easily remove cubes, water the tray in
Fill with potable water only.
Storing Food
• Do not store food which goes bad easily at low
temperature, such as banana, and melon.
• Allow hot food to cool prior to storing. Placing hot food in the f
ridge-freezer could spoil other food, and lead to higher electric bills.
Storing Food
• When storing the food, use a container with a lid. This prevents
moisture from evaporating, and helps food to keep its taste and
• Do not block air vents with food. Smooth circulation of
cold air keeps fridge-freezer temperature even.
• Do not open the door frequently. Opening the door lets warm air
enter the fridge-freezer, and cause temperature to rise.
• To adjust the temperature control easily, do not store
food near the temperature control dial.
• Never keep too many foods in door rack, as this may
stop the door from fully closing.
• Do not store bottles or cans in the freezer compartment
- they may break when frozen.
• Do not refreeze food that has been thawed. This
causes loss of taste and nutrition.
• If it is necessary to quickly freeze fresh food items, place
them to the lower drawer of the freezing compartment
and push the "EXPRESS FREEZE" button;
• Frozen food items should be stored packed (in polyethylene
film, aluminum foil, etc.) in the freezing compartment;
If you keep the fridge-freezer in a hot, and humid place,
frequently open its door or put a lot of vegetables in it, dew
or frost may form in it, which has no effect on its performance.
Remove the dew and frost a dust free cloth.
It contains anti-oxydant that is able to avoid oxidation process in order
to make the fruits and vegetables fresh for longer time.
This part contains anti-oxydant substance that should not be eaten.
Opening and closing the door too much often can reduce its lifetime.
Care and Maintenance
General Information
• 1~2 hour power failure does no harm to the stored foods.
Power Failure
Try to avoid opening and closing the door too frequently.
• Remove all food items and other objects from the refrigerator.
Firmly secure the internal detachable parts (shelves, drawers,
door baskets);
• To avoid damage of the floor and adjustable front feet of the refrigerator,
turn them counter-clockwise before transportation;
• The refrigerator should be firmly secured to prevent it from
dislodging or moving during transportation.
• The refrigerator should be transported in a vertical position in a suitable
The original package should not be damaged during the initial transportation;
• During loading and unloading, the refrigerator should be protected
against impacts.
• If the refrigerator is transported during a cold season, unpack the
refrigerator in a warm room and do not switch on it for at least 12 hours.
Do not move or incline the refrigerator during its operation.
Noise may occur in the compressor.
This feature does not affect operability of compressor. if the noise does not
stop within 10 seconds, then turn off the refrigerator, wait for 1 minute then
turn back on again.
Cracking noise may be heard due to thermal changes of the
refrigerator components.
Typical sounds from activation of the thermostatic controller and
compressor are normal sounds occurring during operation of electric
equipment in the appliance.
The refrigerant circulating inside the refrigeration system may calmly
gurgle,even if the compressor is not in operation.
Do not worry, this is absolutely normal.
The following sounds may be heard during operation of the refrigerator:
- Clicks from actuation of the temperature sensor/switch;
- Murmur of the refrigerant circulating in tubes of the refrigeration system;
- Slight cracking noise from thermal changes of internal parts.
These sounds are not associated with any defect and they have a
functional aspect.
Anti Condensation
• The Anti-Condensation
pipe is installed around the
front side of fridge-freezer
as well as on the partition
between fridge
compartment and freezer
compartment to prevent
dew, or sweating.
• Especially after installation
or when ambient
temperature is high, the fridge-freezer may feel hot,
which is quite normal.
Care and Maintenance
Before Cleaning
Be sure to unplug the power.
Clean the outside of the fridge-freezer with a soft cloth
soaked with hot water or liquid dishwashing detergent. If you use a
detergent, be sure to wipe it with a clean wet cloth.
For products with a stainless steel exterior, use a clean sponge
or soft cloth and a mild dish washing detergent in warm water.
Do not use abrasive or harsh cleaners.
Dry thoroughly with a Soft cloth.
Do not use appliance wax, bleach, or other products containing
chlorine on stainless steel.
As above.
After Cleaning
Check that the power cord is not damaged, power plug
has not overheated, and that the power plug is firmly
inserted into the outlet.
Be sure to dry the appliance with a cloth after washing
it with water.
Do not use abrasive, petroleum, benzene, thinner,
hydrochloride acid, boiling water, harsh brushes, etc, as
they may damage parts of the fridge-freezer.
Trouble Shooting
Trouble Shooting
Before calling for service, check this list.
It may save you both time and expense.
This list includes common occurrences that are not the result
of defective workmanship or materials in this appliance.
Possible Causes
• Power plug may be unplugged from the electric outlet.
Plug it in securely.
does not operate
• House fuse has blown or circuit breaker has tripped.
Check and/or replace fuse and reset circuit breaker.
• Power cut.
Check other power outlets.
• Temperature control not set on proper position.
Refer to Temperature Control section.
Fridge or Freezer
Temperature too
• Appliance is placed close to heat source.
• Warm weather-frequent door openings.
• Door left open for a long time.
• Package holding door open or blocking air duct in
freezer compartment.
• The floor on which the fridge-freezer is installed
may be uneven or the fridge-freezer may be unstable.
Make it even by rotating front leveling feet.
Vibration or
Rattling or
Abnormal Noise
• Unnecessary objects placed in the back side of the
Frost or Ice
Crystals on frozen
• Door may have been left ajar or package holding door open.
Moisture forms on
Cabinet Surface
• This phenomenon is likely to occur in a wet space.
Wipe it with a dry towel.
• Too frequent or too long door openings.
• Frost within package is normal.
• Too frequent or too long door openings.
Moisture collects
• In humid weather, air carries moisture into fridge when
doors are opened.
• Foods with strong odors should be tightly covered or wrapped.
• Check for spoiled food.
Fridge has odor
• Interior needs cleaning.
Refer to CLEANING section
• Food package is keeping door open.
Move packages that keep door from closing.
Door not closing
• Fridge-freezer is not level.
Adjust the front leveling feet.
• The floor on which the fridge-freezer is installed may be uneven or
the fridge-freezer may be unstable.
Slightly raise the front side with the front leveling feet.
Interior light does
not work
• No power at outlet.
• Light lamp needs replacing or faulty LED module.
Refer to the Lamp Replacement section. if fitted with LED lighting,
call the manufacturer for a service technician.
How to Reverse the Doors
Remove the plastic bushing 6 from the
door of the refrigeration compartment А .
Unscrew the screw 10 located above the
door of the refrigerator and move the door
stop 9 to the opposite side. Tighten the
screw 10 . Move the plastic bushings 6
and 14 (only for models with an internal
display) to the opposite side.
The refrigerator is designed so that the doors
can be opened right or left depending on the
layout of your kitchen.
1. Prior to hinging the door to the opposite
side, first of all unload the refrigerator from
foodstuffs and remove all unsecured
accessories (shelves and drawers) from it.
2. To tighten and loose bolts, use a socket
wrench or a box wrench for 10 mm.
3. Do not lay the refrigerator onto the floor.
4. Take care to exclude dropping of the door
in the process of disassembly or assembly.
1. Unscrew the screw 2 of the upper hinge
cover 1 to remove the hinge cover 1 and
disconnect the connection cable 5
(only for models with an external display).
Unscrew the bolts 3 fixing the upper
hinge 4 and carefully remove the door
from the middle hinge 18 .
Remove the blank 8 .
3. (Only for models with an external display).
Using a flat screwdriver, push and separate
the caps 12 from the front panel 11
and unscrew the screws 13 , remove the
panel 11 , move the cable 15 to the
opposite side. After installation of the
panel 11 into place, tighten the screws 13
and close their heads with the caps 12 .
For external
2. Remove the upper door cover 7
(only for models with an external display),
pull out the cable 5 and install it to the
hole on the opposite side of the door.
Install the upper door cover 7 into place.
4. Unscrew the bolts 17 of the middle hinge,
remove the middle hinge and raise the door
of the freezing compartment B to remove
the door. Remove the blank 19 and install
it instead of the removed middle hinge 18 .
Unscrew the dowel 22 of the lower hinge 23
turning it counter-clockwise and screw the
dowel into the opposite hole. Unscrew the
bolts 24 fixing the lower hinge 23 and
bolt 25 on the refrigerator enclosure.
Unscrew the screw 10 on the lower part of
the door fixing the door closer 29 of the
freezing compartment В . Unscrew the
screw 10 on the lower part of the door fixing
the door stop 9 of the freezing
compartment В , move the stop 9 to the
opposite side into the dedicated place and
fix it. Rehinge the closer 29 to the opposite
side into the dedicated place and fix it.
Move the upper cap 26 to the opposite side.
6. Install the door of the refrigeration
compartment A aligning the hole in the
lower part of the door and middle
hinge dowel 18 . Then install the upper
hinge 27 supplied in the refrigerator
package placing the dowel into the
appropriate upper hole in the door of the
refrigeration compartment A . Connect the
cable connectors 5 (only for models with an
external display). Fix the upper hinge 27
using the bolts 3 . Install the left cover of
the upper hinge 29 and fix it with the
screw 2 . Install the blank 28 supplied in
the refrigerator package.
5. Attach the removed lower hinge to the
holes located on the opposite side of the
enclosure and fix the hinge with the bolts 24 .
Tighten the screw 25 in the enclosure on the
opposite side. Install the door of the freezing
compartment В onto the lower hinge
dowel 23 . Unfold the removed middle
hinge 18 with its axis out and fix the hinge
with the bolts 17 (tighten the bolts carefully
to exclude scratching of the door). Install the
washer 16 onto the middle hinge 18 .
For external display
Reversing the doors is not covered by
the warranty.
Should you experience any problems with
your refrigerator, it has the capability of
transmitting data via your telephone to the LG
service center. This gives you the capability of
speaking directly to our trained specialists. The
specialist records the data transmitted from
your machine and uses it to analyze the issue,
providing a fast and effective diagnosis.
3 Hold the mouthpiece of your phone in
front of the speaker that is located on the
right hinge of the refrigerator door, when
instructed to do so by the call center.
If you experience problems with your
refrigerator, call the phone No. of LG
Customer Information Center. Only use
the Smart Diagnosis feature when instructed
to do so by the LG call center agent. The
transmission sounds that you will hear are
normal and sound similar to a fax machine.
4 Press and hold the Freezer Temperature
button for three seconds while continuing
to hold your phone to the speaker.
Smart Diagnosis cannot be activated unless
your refrigerator is connected to power. If
your refrigerator is unable to turn on, then
troubleshooting must be done without using
Smart Diagnosis.
5 After you hear three beeps, release the
Freezer Temperature button.
Using Smart Diagnosis
6 Keep the phone in place until the tone
transmission has finished. This takes about
15 seconds, and the display will count
down the time. Once the countdown is
over and the tones have stopped, resume
your conversation with the specialist, who
will then be able to assist you in using the
information transmitted for analysis.
First, call the phone No. of LG Customer
Information Center. Only use the Smart
Diagnosis feature when instructed to do so
by the LG call center agent.
Lock the display. (Option)
To lock the display, press and hold the
Lock button for three seconds. (If the
display has been locked for over five
minutes, you must deactivate the lock
and then reactivate it.)
For best results, do not move the phone
while the tones are being transmitted.
If the call center agent is not able to get
an accurate recording of the data, you
may be asked to try again.
Call quality differences by region may
affect the function.
Use the home telephone for better
communication performance, resulting
in better service.
Bad call quality may result in poor data
transmission from your phone to the
call center, which could cause Smart
Diagnosis to not work properly.
Open the refrigerator door.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF