LG | WD-10150FB | LG WD-1015FB Owner’s Manual

P/No.: 3828ER3019R
Washing
Machine
OWNER'S MANUAL
WD-13150(5)FB
WD-12150(5)FB
WD-11150(5)FB
WD-10150(5)FB
WD-80150(5)FB
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Jumbo drum
40%
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
More economical
Intelligent
Wash
by Intelligent
System
Wash
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
water level and
consumption.
Child-Lock
Crease Care
The Child-Lock
pressing
system has been used
any button to
Low noise
speed
change
control
to
prevent children from
the program
during operation.
system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
Do not install
be
?
?
or
store the washer where it will
?
the weather.
exposed to
Do not
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
instructions
or
published user-repair
instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this
is used
by or
near
?
using
dry
or
articles that have been
in, washed in, soaked in,
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
or
appliance
?
play on, with,
any other appliance.
Do not leave the washer door open.
An open door could entice children to
or
or
inside
Never reach into washer while it is
?
The
until the drum has
hang
can
this
possibility of electric shock,
appliance from the power supply or
disconnect the washer at the household
on
?
moving.
completely stopped.
laundry process
retardant of fabrics.
try to
distribution
crawl inside the washer.
?
or
To minimize the
unplug
or
the door
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
children.
Do not allow children to
this
?
persons when
instructions.
out.
?
Do not wash
combustible
recommended in the user-maintenance
?
injury to
cleaned
Do not
or
or
washer, follow basic precautions, including the following:
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
S
pecification
Power
If the
plug
supply cord is damaged,
replaced by the
it must be
manufacturer
or its service agents
similarly qualified person in
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drum
Door
Lower
cover
Adjustable
Lower
Drain pump filter
Drain
cover
cap
plug
Name
Power
supply
:
Front
:
220-240V~,50Hz
600mm(W) 600mm(D)
65kg / 2100W
7.0kg
Size
:
Weight / Max.Watt
Wash capacity
Water consumption
:
Permissible water pressure
:
Spin speed
:
The appearance and
:
loading washing
machine
850mm(H)
:75
0.3-10kgf/ (30-1000kPa)
No spin/400/500/600/800 [WD-80150(5)FB]
No spin/400/600/800/1000 [WD-10150(5)FB]
No spin/400/600/800/1100 [ WD-11150(5)FB]
No spin/400/800/1000/1200 [ WD-12150(5)FB]
No spin/400/800/1100/1300 [WD-13150(5)FB]
specifications
may be varied without notice to raise the units
Accessories
Spanner
4
feet
quality.
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin,
pay
all times.
particular
are areas
attention to
Any damage which may
appliance guarantee.
be
cause
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition at
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
appliance
is fitted with transit bolts to
Removing
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
bungs.
?
?
If
they
are
not
removed, it may
use.
cause
heavy
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
vibration, noise and malfunction.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with
than
Laundry
one
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
more
appliance.
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
identifying
letter E
by the
or
earth
symbol
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
Electrical connection
1. Do not
3.
extension cord
cord is
5. The
?
?
appliance
or
it must be
4. Connect the machine to
?
double
adapter.
supply
damaged,
replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
use an
2. If the
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Washing
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
Connecting
water
supply
hose
Water
supply pressure must be between
(0.3~10kgf/cm2)
30kPa and 1000kPa
Don't
strip or crossthread when connecting
Inlet hose to the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
water leaks.
Check water tightness of washing
machine connections by turning the
completely
Rubber seal
?
tap
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water
tap
Make sure that there is no kink
hose and that it is not crushed.
on
the
Cold
Cold
Hot(option)
water
When your washer has two valves,
tap
?
?
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Tap without
Normal
1. Unscrew the fixing
attach the tap.
screw
thread &
2.
to
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
Tap without
Normal
1. Untighten the upper
thread &
connector
2.
touch
one
packing
contact with the
Upper
Rubber
Connector
the 4
tighten
packing
Fixing screw
type inlet hose (Single inlet models)
Push the upper connector up till
the rubber
screw.
Middle
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
tap is
Connector
Water
hose
Middle
guide plate.
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation !
all
Keep
well away from children
packaging
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
ca.
105
cm
?
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
?
?
105
cm
min.60cm max.10cm
100cm
max.
100cm
min. 60cm
strap
min. 60cm
The drain hose should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven, adjust the
adjustable feet as required. (do not
insert
pieces
Make
sure
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
Adjustable
Higher
Adjustable
feet
a
Lower
feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
the
machine should not move up and down at
all. (Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
10
C
before
are
Caring
before
washing
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always
transfer
sort dark colors from
soiled items with
Soil
3.
Caring
before
colors and whites. Wash
separately as dye and lint
possible, do not wash heavily
one.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
pale
discoloration of white etc. If
causing
lightly soiled
can occur
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
dding detergent
A
and fabric softener
Adding detergent
1. The
3. Detergent dosage
Drawer
Dispenser
?
The
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too much detergent
is used
more
than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy
malfunction)
or cause
Fabric
softener
for
main wash
Detergent
()
?
Main wash
only
for
pre wash
load to the motor.
(Causing a
Detergent
()
?
()
Use powder
loading
U
?
Detergent
for water
?PreWash+MainWashU
detergent only for the front
washer.
usage may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
the clothes
directly on
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
at
unction
F
Recommended
(
)
courses
according
to the
laundry type
WD-80150(5)FB
:
Fabric
Energy
Option
Type
First check if
laundry
is machine
(white
Time
in
in
kWh
Minutes
Pre Wash
95˚C
Time Save
Rinse+
cotton, linen
towel and
Load
Temp.
washable.
Cotton
Maximum
Proper
Program
Rating
2.74
Rating
1.33
159
Crease Care
sheets...)
Bio
Color fast gaments
Pre Wash
(shirts, night dresses,
60˚C
pajamas...)and lightly (30˚C, 40˚C)
Time Save
soiled white
Rinse+
155
(154)
Crease Care
Bio
cotton(underwear...)
Synthetic Polyamide, Acryic,
Polyester
Eco
Pre Wash
40˚C
Time Save
(60˚C, 30˚C)
Rinse+
Crease Care
Less than
3.5
0.45
84
0.41
58
0.28
58
0.03
57
0.35
30
kg
Bio
Delicate
Wool
Delicate laundry
easily damaged
(silk, curtains...)
Machine washable
woolens with pure
new
wool
only
Hand
"Hand Wash" marked
Wash
delicate and wool
30˚C
(40˚C, Cold)
30˚C
(40˚C, Cold)
Rinse+
Crease Care
Time Save
Rinse+
Crease Care
Time Save
Cold(30˚C )
Rinse+
Crease Care
laundry
Colored
Quick 30
Time Save
which is
Laundry
lightly soiled
30˚C
Rinse+
Crease Care
Less than
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
Less than
2.0
kg
fast.
Pre Wash
:
If the
laundry
is
heavily soiled, "Pre Wash" course
Synthetic Program.
is recommended. Pre Wash is
available in Cotton and
Eco
:
By selecting
Eco
function, the
water
temperature is reduced and washing time is lengthened.
So you can economize in your consumption of heating energy.
Rinse+: Used to introduce an additional rinse, which may assist in removing traces of
residue.
Bio
NB.
If you want to eliminate protein stains (milk, blood, chocolate...), you may
pressing the option button.
You can only select Bio function when temperature is higher than 60˚C in
Cotton and Synthetic.
:
detergent
select Bio function
13
by
H
ow to use
washer
Crease Care
1. Cotton
selected upon power
?
Press the
Power(
?
Press the
Start/Pause(
?
2. Manual
automatically
) button
to start.
) button.
?
?
Initial condition
-
-
-
-
-
Wash
:
main wash
Rinse
:
3 times
Program : Cotton
14
Press the
Power(
) button
to start.
Select the conditions which you want to
use, by turning the program dial and
pressing
each button.
For selecting the each
conditions, please
refer to the page15~page20
Spin : 1300 rpm [WD-13150(5)FB]
1200 rpm [WD-12150(5)FB]
1100 rpm [WD-11150(5)FB]
1000 rpm [WD-10150(5)FB]
800 rpm [WD-80150(5)FB]
Water temperature
Selecting
on.
:
60˚C
?
Press the
Start/Pause(
) button.
H
ow to use
(1)
(1)
(2)
(3)
(4)
Button
Dial
:
:
washer
(2)
(3)
Power
(5)
(6)
(7)
(8)
Program
Button
:
Start/Pause
Button
:
Bio
(4)
(5)
(6)
Button
:
Time Save
Button
:
Rinse+
Button
:
Pre Wash
Button
:
Crease Care
(7)
(8)
(9)
(10)
(11)
(9) Child Lock
(10) Button : Spin
(10) Button : Time Delay
Option
2. Time Save
This
?
option
time of
To
?
can
be used to reduce the
wash program.
this
use
button
Crease Care
a
press the Time Save
before the wash program is
option
once
started.
This
?
?
By pressing the Option button, all
Option functions may be selected.
-
Bio
-
Pre Wash
-
-
-
Rinse
+
Crease Care
Used to additional rinse, which may assist
removing traces of detergent residue.
?
Time Save
in
By selecting Rinse+ function,
?
If you want to eliminate
protein
stains(milk, blood, chocolate...), you may
select Bio function by pressing the option
button. [You can select Bio function when
temperature is higher than 60˚C in Cotton
and Synthetic.]
is not available with Quick 30
3. Rinse+
1. Bio
?
option
program.
time and the rinse water
are
the rinse
increased.
4. Pre Wash
?
If the
laundry
course
?
is
heavily soiled,
"Pre Wash"
is effective.
Pre Wash is available in Cotton and
Synthetic.
The
required lamp
will
light up for identification.
5. Crease Care
?
If you want to prevent crease, select this
button with spin speed.
15
H
ow to use
washer
Spin
800
1000
1100
1200
600
800
800
1000
500
600
600
800
400
400
400
400
[WD-10150(5)FB]
[WD-11150(5)FB]
[WD-80150(5)FB]
By pressing
?
1.
the
Spin button,
the
spin speed
[WD-12150(5)FB]
be chosen.
can
Spin selection
WD-12150(5)FB
?
?
Spin Speed
program
as
is available
according
to the
-Cotton/Rinse+Spin/Quick 30
Rinse Hold-No Spin-400-800-1000-
follows.
WD-80150(5)FB
?
-
1200
Cotton/Rinse+Spin/Synthetic/Wool
Delicate
-
/Delicate/Hand Wash/Quick 30
Rinse Hold-No
Rinse Hold-No
Spin-400-500-600-
WD-10150(5)FB
-Cotton/Rinse+Spin/Synthetic/Wool/
WD-13150(5)FB
?
-Cotton/Rinse+Spin/Quick 30
Rinse Hold-No Spin-400-800-1100-
Hand Wash/Quick 30
Rinse Hold-No
Spin-400-600-800-
1300
1000
-
Delicate
-
Rinse Hold-No
Delicate
Rinse Hold-No
Spin-400-600-800
-
WD-11150(5)FB
?
Spin-400-800
Synthetic/Wool/Hand Wash
Rinse Hold-No Spin-400-800-1000
-
800
?
[WD-13150(5)FB]
Spin-400-800
Synthetic/Wool/Hand Wash
Rinse Hold-No Spin-400-800-1100
-Cotton/Rinse+Spin/Synthetic/Wool
/Hand Wash/Quick 30
Rinse Hold-No
Spin-400-600-800-
2. No
spin
1100
-
?
Delicate
Rinse Hold-No
Spin-400-600-800
If
no
after
spin is selected,
draining water.
The required lamp
identification.
16
will
the washer
light up for
stops
ow to use
H
washer
3. Rinse Hold
?
Is selected
by pressing
repeatedly
this function leaves clothes in
the machine;
a
?
Child Lock
the
spin
button
suspended in the water
entering into spin.
after
Crease Care
rinse without
To
to
proceed through
a
drain
once
the rinse hold function is
using
to program dial scroll to
spin,
completed
the required
or
program.
If you choose to lock the buttons on the
control assembly to prevent tampering this
function may be selected.
1. Child Lock
(Spin)
The
required lamp
identification.
will
light up for
?
Child Lock
can
be set
Care button and
Water
by pressing the Crease
Spin button simultaneously.
Temp.
?
?
When child lock is set, all buttons
are
inoperable
except power button.
To deactivate Child Lock system, press
Crease Care and Spin button simultaneously
again.
?
the
By turning
temperature
-
the water
Program Dial,
can
be selected.
Cold
?
-30˚C/40˚C/60˚C/95˚C
To
change
to the desired program, whilst in
child lock mode.
1. Press both Crease Care and
1. Water
?
Water
temperature
according
together
Temperature
can
to the program.
will
Spin
again.
2. Press the Start/Pause button.
be selected
The required temperature lamp
for identification.
once
3. Select the desired program and press the
Start/Pause button again.
light up
Change
the desired
program
For the
more
refer to
the page13.
detailed
information, please
?
The child lock
is
errors occur.
be set at any time and it
canceled when operational
can
automatically
Also Child Lock works when
power is off.
17
ow to use
H
Time
1. Time
washer
Program
Delay
Delay
Preparing washing before starting
"Time
8 programs
?
Delay"
-
-
-
Turn
the water
tap.
Lamp
?
Load
laundry and close the door.
Place the detergent and fabric softener
-
-
?
Delay"
Program
dial to select
-
the program you require.
Press Time Delay button and set the
Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
hours.
?
To cancel the time
delay,
advances
on
press the Power
button.
?
Time
present
or
?
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
is
to the
selected
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
may vary.
Program dial,
-
"
Cotton
the program is
Delicate-
Rinse+Spin- Spin
Synthetic".
-
Hand
-
2. Course
-
-
-
pressing of the button
delay by one hour.
the
pressed, the
automatically selected.
Regarding to the laundry type for each program
Please refer to the page13.
If Time
Each
By turning
Wash- Wool
Press the Start/Pause button.
time
When Start/Pause button is
Quick 30
19:00 hours and the minimum time is 3:00
?
Program
selected in order of
(":" blinks.)
?
up to indicate selected
light
Cotton program is
Press Power button.
Turn the
will
program.
desired time.
-
to the
in
1.
How to set "Time
-
according
laundry type.
on
the drawer.
?
available
are
Cotton
-
30
Quick
Synthetic
-
-
Delicate
Wool
Hand Wash
-
-
Rinse+Spin
Spin
ow to use
H
washer
Start/Pause
Power
1. Power
1. Start
?
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
Press the Power button to turn power
on
and off
cycle.
?
To cancel the Time
Delay function,
pressed.
if the
power button should be
2. Initial
2. Pause
?
?
?
If temporary stop of wash cycle is
needed, press the Start/Pause button.
When in Pause, the power is turned off
automatically after 4 minutes.
?
at the end of the wash
When the Power button is
pressed,
?
washer is
ready
So, if you
want to advance into the
the
for Cotton program. And
the other initial conditions as follows.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
Program
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
[WD-80150(5)FB]
-
Cotton
Program / Main wash
/
Normal Rinse/800 rpm / 60˚C
[WD-10150(5)FB]
-
Cotton
Program / Main wash
/
Normal Rinse/1000 rpm / 60˚C
[WD-11150(5)FB]
-
Cotton
Program / Main wash
/
Normal Rinse/1100 rpm / 60˚C
[WD-12150(5)FB]
-
Cotton
Program / Main wash
/
Normal Rinse/1200 rpm / 60˚C
[WD-13150(5)FB]
-
Cotton
Program / Main wash
/
Normal Rinse/1300 rpm / 60˚C
19
H
washer
ow to use
Display
3.
?
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
1.
?
Special function display
When child lock is selected, the
is displayed.
"
"
?
If the machine encounters
operation;
displayed
a
fault
4. Time left
during
?
the associated fault will be
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
2. Self
?
diagnosis display
If the machine encounters
operation,
displayed.
"
"
:
"
"
"
"
"
"
:
:
"
"
"
"
"
"
"
"
"
"
a
during
-
the associated fault will be
-
Water pressure
Problem of
-
sensing
error
-
overfilling
water
-
Door is not closed
:
Over load in motor.
:
Over load in motor.
:
fault
(
-
-
-
Water inlet trouble
-
trouble
:
Drainage
:
Unbalanced load
:
Water temperature trouble
?
)
by
manufacturer.
WD-80150(5)FB
:
Cotton 95˚C : around 2 hours and 39 minutes
Cotton 60˚C
:
around 2 hours and
35(34)
Synthetic
:
around 1 hour and 24 minutes
Delicate
:
around 58 minutes
Wool
:
around 58 minutes
Hand Wash : around 57 minutes
Quick 30 : around 30 minutes
Rinse+
Spin
:
Spin
:
around 20 minutes
around 12 minutes
The
washing time may vary by the
laundry, water pressure,
temperature and other washing
amount of
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
minutes
water
conditions.
?
If
an
unbalanced load is detected
or
if the
suds removing program operates, the
wash time may be extended.
(Max. increasing time is 45minutes.)
20
aintenance
M
Before
cleaning the washer interior, unplug the electrical
power cord to avoid electrical
shock to avoid electrical shock hazards.
When
of the appliance, cut off the mains cable, and destroy the plug Disable the
prevent young children being trapped inside.
disposing
door lock to
The water inlet filter
"
-"
error
detergent
-
message will blink
If your water is very hard
become
on
the control
panel
when water does not enter the
drawer.
clogged.
a good
It is therefore
or
contains traces of lime
deposit,
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
First drain
filter is clean to
using
any threads
or
Open the lower cover
cap( )byusinga
2.
draining
machine.
remove
whatever
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
plug(
water
)topullout
laundry.
running of your
the drain and then open the pump filter to
this time
the hose.
left in the
smooth
objects.
Be careful when
1.
objects
ensure
use a
flowing
vessel to
on
3. Remove any
At
prevent
to the floor. When
cleaning,
After
( )
)to the original place.
plug (
close the lower
)
).
clockwise and insert the drain
the pump filter
(
(
turn the pump filter
water does not flow any more, turn
open to the left.
material
foreign
from the pump filter
cover
cap.
100
3
1
3
2
2
21
aintenance
M
Dispenser
After
a
while
drawer
and fabric softeners leave
detergents
deposit
It should be cleaned from time to time with
?
If necessary it can be removed completely from the machine
downwards and by pulling it out.
?
To facilitate
cleaning,
the upper
a
jet
of
a
?
running
in the drawer.
water.
by pressing
part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
recess
also accumulate inside the
with
occasionally
an
recess
?
Once you have finished cleaning,
rinse cycle without laundry.
?
If you live in a hard water area, limescale may
seen and thus not easily removed.
The
washing
replace
the drawer and
run a
drum
Over time the build up of scale
be replaced.
continuously
clogs appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
?
The
drum should be cleaned from time to time.
?
If you
?
Although
the
which should
old toothbrush.
washing
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places
where it cannot be
in check these may have to
of rust
can
be caused
are
suitable for
washing
use.
Descaler may contain chemicals that may
Remove any
Never
22
use
spots
with
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
by
small
the drum.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
with
spills. Wipe
damp cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
through
a
flexible
opening,
process if necessary.
NOTE
Remove hard water
and door
glass.
hot water.
complete cycle using
Repeat
gasket
deposits using only
cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
9. To
remove
through
a
an
expelled.
cord, dry the drum interior, and close the door.
dispenser drawer
8. Store washer in
for 1minute to drain out all water.
drain and
dry
excessive water from the
compartments.
uprignt position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
roubleshooting guide
T
This washing machine is
equipped with automatic safety functions which detect and diagnose faults at an
appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
early stage and
react
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer
and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads may produce
thumping sound. This is usually
If sound continues, washer is
probably out of balance. Stop and
normal.
redistribute wash load.
a
Vibrating
noise
?
Have all the transit bolts and
packing
?
Are all the feet
the
If not removed
been removed?
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
is not
hose(s)
are
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
T
roubleshooting guide
Possible Cause
Symptom
?
Water
?
Water
?
?
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
are
Check another tap in the house.
Fully
open tap.
Straighten hose(s).
kinked.
hose(s)
Solution
clogged.
Check the filter of the inlet hose.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
has
an
imbalance
detection and correction
system. If
individual
are
heavy
articles
or
straighten
the drain hose.
2 similar items to
Rearrange
spinning
load to allow proper
loaded
bath mat, both robe,
?
Is the door
Close the door.
opened?
If
"
"is not released, call for service.
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
26
help
etc.) this system
or
even
may stop spinning
interrupt the
spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.
(ex.
?
appliance
or clogged.
clogged.
Close the water
Unplug the
tap.
power
Call for service.
?
Water level
?
Over load in motor.
?
Over load in motor.
sensor
has malfunctioned.
plug.
and call for
T
of
erms
Warranty
What Is Not Covered:
?
?
?
?
Service
to your home to teach you how to use the
trips
If the
product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
in
use or use
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
pests for
change
or
example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
by
of
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by the
owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
Replace
or
correct house
Correction of unauthorized
Incidental
possible
?
fuses in
If this
or
wiring
or
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
is used for commercial purpose, it is not warranted.
Public
(Example
places
center, dormitory)
:
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
Download PDF

advertising