LG | WD-1236TD | LG WD-1236TD Owner’s Manual

P/No.: 3828ER3038W
Washing
Machine
OWNER'S MANUAL
WD-1236TD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Features
Protection against
creases
With the alternate rotation of the drum,
creasing
in the
laundry
is
minimized.
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
washing
time to minimize energy and water
water level and
consumption.
Child-Lock
The child-lock system is to be used for preventing children from
pressing any button to change the program during operation.
Low noise
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
Auto Restart allows the program to restart all
power failure. It does from the stage where it
Direct Drive
by itself in
stopped.
System
The advanced Brushless DC motor rotates the drum
without belt and
C
case
directly
pulley.
ontents
Warnings....................................................................................3
Specifications.............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
of
W arnings
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
or injury
precautions, including the following:
Before installation, check exterior
damages.
If it
has,
?
do not install.
?
Do not install
be
?
?
exposed
or
store the washer where it will
to the weather.
Do not tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
Do not slam the washer door closed or try to force
the door open when locked. This could result in
damage to the washer.
published user-repair instructions that you
understand and have the skills to carry out.
Keep the area underneath and around your
?
When the machine
or
appliances free of combustible materials such
lint, paper, rags, chemicals,
?
?
?
?
?
?
dry articles that have been cleaned
or spotted with
combustible or explosive substances (such as wax,
oil, paint, gasoline, degreasers, dry-cleaning
solvents, kerosene, etc.) which may ignite or
explode.
or
?
recommended in the user-maintenance instructions
?
using
in, washed in, soaked in,
Do not
or
Do not wash
to persons when
?
as
etc.
Close supervision is necessary if this appliance is
used by or near children. Do not allow children to
play on, with, or inside this or any other appliance.
Keep small animals away from the appliance.
Do not leave the washer door open.
An open door could entice children to hang on the
door or crawl inside the washer.
Never reach into washer while it is moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame retardant
of fabrics.
To avoid such a result, carefully follow the garment
manufacturer's wash and care instructions.
runs high temperature, the front
door may be very hot. Don't touch it.
To minimize the possibility of electric shock, unplug
this appliance from the power supply or disconnect
the washer at the household distribution
?
?
?
panel by
removing the fuse or switching off the circuit breaker
before attempting any maintenance or cleaning.
When unplugging power cord, do not pull out by
grasping the cord. Otherwise, the power cord may
be damaged.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially disassembled, or
has missing or broken parts, including a damaged
cord or plug.
Before discarding an old machine unplug it. Render
the plug useless. Cut off the cable directly behind
the appliance to prevent misuse.
Do not push down the door excessively, when washer door open.
This could topple over the washer.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
or breakdown, grounding will reduce the risk of electric shock by providing a path
appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance must be grounded.
In the event of malfunction
of least resistance for electric current. This
?
?
If you don't have the proper
outlet, consult
an
electrician.
WARNING : Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with
a
qualified electrician or serviceman
plug provided with the appliance
the
-
if you are in doubt
if it does not fit the
as
to whether the
outlet, have
a
appliance is properly grounded. Do not modify
proper outlet installed by a qualified electrician.
3
pecifications
S
Bio
CottonC
Time
Left
600
Intensive
800
nse+
Ri
400
1000
Eco
Pre
RinseHold
Wash
1400
Care
Crease
Dlit
No
Power
Spin
Spin rpm
rt Pause
Name
Power
:
Front
loading washing
machine
:240V~,50Hz
supply
Size
: 600mm(W) x 550mm(D) x 850mm(H)
Weight
:64kg
Wash capacity: 7 kg(2100W)
Water consumption
: 75§G
: No spin/No Drain/400/600/800/1000/1200
Spin speed
Permissible water pressure
: 4.5
145 PSI (30
1000 kPa)
The external hot water supply MUST NOT exceed 70 deg C
~
Permissible cold water
TT
:
Appliance
~
temperature : 4-25˚C
co.y with the
requirement by certification Type Test Mark.
protection required for connection to the water supply.
and specifications may be varied without notice to lmprove
No further backflow
The appearance
Specifications subject
Accessories
4
to
change by
manufacturer.
the units
quality.
nstallation
I
Install
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance
guarantee.
Transit bolts
The
?
appliance is fitted
with transit bolts to
prevent internal damage during transport.
and all transit bolts must
Packing
be removed before
using
the
washer.
Washer
When
☞
sure
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
Removing
middle
Packing Support
Base
Packing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
3. Take out the 4 bolts
along with the
bungs by slightly twisting the
bung. Keep the 4 bolts and the
rubber
spanner for future
remove
the bolts
?
along
with the rubber
If
they are not removed, it may cause
heavy vibration, noise and malfunction.
2. Unscrew the 4 bolts with
the spanner
use.
bungs.
?
Whenever the
appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
under entire washer is 1˚
slope
Power outlet
:
Must be within 1.5 meters of either side of
location of washer. Do not overload the outlet
with
Laundry
Tub
more
than
appliance.
one
Additional Clearance
approx.
2cm
For wall, door and floor
(10cm
: rear
Do not
place
/2cm:right
or
store
:
modeling is required.
side)
& left
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
Positioning
Install the washer
Make
?
?
sure
on a
flat hard floor.
that air circulation around the washer is not
Never try to correct any unevenness in the floor with
materials under the washer.
If it is
impossible
to avoid
positioning
impeded by carpets,rug
?
?
The washer must not be installed in
Please
ensure
the washer next to
the event of
?
a
rooms
a
or
similar
gas cooker or coal burning
the side facing the cooker
on
where the temperature
that when the washer is installed, it is
breakdown.
With the washer installed
of wood, cardboard
pieces
stove,an insulating(85x60cm) covered with aluminum foil
stove,must be inserted between the two appliances.
etc.
easily
can
drop
or
below 0 C.
accessible for the
engineer
in
adjust all four feet using the transit bolt spanner provided
is stable, and a clearance of approximately 20mm is left between
the top of the washer and the underside of the work-top.
ensuring
6
the
appliance
I
nstallation
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the manufacturer or its service agents
qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
3.
4.
5.
?
?
?
or
similarly
Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may
burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing
point.
If the appliance is delivered in the winter months and temperatures are below freezing : Place the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing Machine
is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting
water
supply hose
supply pressure must be between 30kPa
(0.3~10kgf/cm2)
▶Don't strip or crossthread when connecting
▶Water
and 1000kPa
Inlet hose
▶If the
to
the valve.
supply pressure is more than
1000kPa, a decompression device should be
water
installed.
?
Two rubber seals
are
supplied
with the water
inlet hoses.
are
used for
preventing
They
water leaks.
?
?
Hose connector
?
Rubber seal
Make sure the connection to taps is tight
enough.
Periodically check the condition of the hose
and replace the hose if necessary.
Make
sure
that there is
no
kink
on
the hose
and that it is not crushed.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
connector up till the
packing is
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
touch type inlet hose
one
(Single
inlet models)
2. Push the upper connector up till 3. Connect the water supply hose
the rubber packing is in tight
to the middle connector,
contact with the tap. Then
pushing the plate down.
tighten the 4 screws.
Middle
Rubber
connector
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Water
Middle
remove
Guide
hose
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the Plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a
Turn off the
risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
?
When
installing the drain hose to a sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
?
?
The drain hose should not be
than 100
?
cm
Proper securing of the
damage
the floor from
?
placed higher
above the floor.
drain hose will protect
due to water
When the drain hose is too
long,
back into the washer. This will
leakage.
do not force
cause
abnormal
noise, malfunction, and water leakage.
.
9
I
nstallation
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
Timber
NOTE
on a
solid and level floor surface,
2. If the floor is uneven,
pieces
Make
sure
in
a
may contribute to
suspended type flooring
or
excessive vibration and unblance
insert
preferably
room.
errors.
adjust the adjustable
feet)
feet
as
required. (do
not
of wood etc. under the
that all four feet
are stable and resting on the floor and
appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
then check that the
NOTE
In the
case
platform,
that the
washing machine is installed
securely fastened in order
risk that it might fall off.
on a
raised
it must be
to eliminate the
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
?
Position each foot
Tile floors
on a
must
be
clean, dry and level.
flat hard floor.
(Slippery floors)
on
sections and stick the
Tread Mate is
a
the Tread Mate and level the machine
pieces
on
to
the
dry
self adhesive material used
Wooden floors
on
(Cut Tread
to suit.
tile where machine is
to
be
Mate into 70x70
placed.)
ladders & steps that prevents
?
?
※
Insert the rubber cups to reduce vibration.
※
Rubber cups
?
?
?
?
?
slipping.
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
at least 15mm thick under the washer, secured to at least 2 floor beams with screws.
If possible install the washer in one of the corners of the room, where the floor is more stable.
?
mm
( p/no. 4620ER4002B ) can be purchasedfrom the LG
spare parts
department.
Rubber
It
Cup
can
be
purchased
from hardware
suppliers.
Important!
Proper placement and levelling of the washer ensures long, regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
It must not "Seesaw" across corners under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
10
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60 C,
clothing.
a
without
This will
remove
add
a
half load of
detergent)
allow the unit to wash
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
a care
2.
on your clothes. This will tell you about the fabric content of your
it should be washed.
label
garment and how
Sorting
To
get the best results, Sort clothes into loads that
be washed with the
can
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
3.
causing discoloration of white
lightly soiled one.
can occur
soiled items with
Color
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Separate
Separate
Lint
Wash lint
etc. If
possible, do
clothes
according
not wash
heavily
to amount of soil.
white fabrics from colored fabrics.
producers and
separately.
lint collectors
Caring before loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all pockets to make sure
they are empty. Items such
that
as
nails, hair clip, matches, pens,
coins and
keys
can
damage
both
your washer and your clothes.
?
Close zippers, hooks and strings to
make sure that these items don't
snag
?
on
other clothes.
Pretreat dirt and stains
a
little
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
A dding detergent
Adding detergent
1. The
and fabric softener
3. Detergent
Dispenser Drawer
?
The
dosage
detergent
according to the
the
of
detergent manufactrurers.
should be used
instruction
?
max
If too much detergent
can occur
is used, too many suds
and this will decrease the washing
or cause heavy load to
(Causing malfunctions)
result
?
?
If there are too many suds,
quantity must be reduced.
Use
the motor.
the
detergent
specified Front loader washing powder
only.
?
Main wash
only
?
?PreWash+MainWash
2.
Detergent usage may need to be
adjusted for water temperature, water
hardness, size and soil level of the load.
For best results, avoid oversudsing.
Adding Fabric Softener
Tips
?
Full load
according
:
to
manufacturer's
recommendation.
?
Do not exceed the maximum fill line.
Overfilling
can cause
?
early dispensing
?
Part load
:
3/4 of the normal amount.
Minimum load
:
1/2 of full load.
of the fabric softener which could stain
clothes.
?
?
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
?
2
days.
Softener will automatically be added
during the last rinse cycle.
The soap drawer can be partially
opened to add pre dissolved soap
powder during the initial fill.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly
12
on
the clothes
Detergent is flushed from the dispenser
beginning of the cycle.
at the
F
unction
Recommended
courses
Fabric
Program
according
laundry
Option
Maximum Load
is
machine washable.
(white cotton, linen
and sheets...)
laundry type
Proper
Temp.
Type
First check if
to the
95˚C
towel
Medic Care Rinse
Cotton
Intensive
Colour fast gaments
(shirts, night dresses,
pajamas...)and lightly
soiled white
60˚C
(30°C, 40°C,
60°C-Eco )
Rating
Rinse+
Pre Wash
Crease Care
cotton(underwear...)
Polyamide, Acryic,
Polyester
Synthetic
40˚C
Coloured fast
Quick 30
which is
Hand Wash
laundary
lightly soiled
"Hand Wash" marked
/ Wool
laundry
or
Delicate laundry easily
damaged
(silk, curtains...)
Bedcover
Only for
Baby Care
Laundry for
30°C
Rinse+
Intensive
Rinse+
30˚C
Intensive
(40°C, Cold)
Rinse+
60˚C
(95°C)
protein
infant
60˚C
95˚C
Medic Care Rinse
Intensive
Rinse+
Crease Care
Medic Care Rinse
Intensive
Rinse+
Pre Wash
Crease Care
kg
Less than
2.0
30˚C
bedcover
For elimination of
stains
Bio Care
3.0
(Cold)
machine
washable woolens
Delicate
Less than
(30˚C, 60°C)
kg
Less than
2.0
kg
Less than
2.0
kg
Rating
Rating
Less than
6.0
kg
laundry is heavily soiled, "Pre Wash" Cotton is recommended.
Synthetic Program.
Eco : By selecting Eco function, the water temperature is reduced and washing time is lengthened.
So you can economize in your consumption of heating energy.
Intensive : When washing heavily soiled laundry you can increase effectiveness by choosing "Intensive" option.
Medic Care Rinse : For high effectiveness or more purity in rinse operation you can choose Medic Care Rinse
option. It can be chosen in all course with the exception of Hand Wash/Wool, Delicate,
Pre Wash
:
If the
Pre Wash is available in Cotton and
Quick 30.
Rinse+: Used
Crease Care
rinse, which may assist in removing
prevent creasing, select Crease Care button.
to introduce an additional
:
If you want to
traces of
detergent residue.
13
H
ow
to
use
washer
Baby Care
Cotton
Bio Care
Bedcover
Medic Care
Rinse
Eco
Intensive
Delicate
Synthetic
?
?
Power(
Press the
Start/Pause(
) button
Wash
:
main wash
Rinse
:
3 times
to start.
) button.
?
?
Program
14
:
) button
to start.
each button.
selecting the each conditions, please
refer to the page15~page20
1200 rpm
Cotton
Power(
Select the conditions which you want to
use, by turning the program dial and
pressing
?
:
Press the
For
-Spin:
Water temperature
Selecting
on.
Initial conditions
-
-
Crease Care
2. Manual
automatically
Press the
-
-
Pre Wash
Rinse+Spin
selected upon power
?
Rinse+
Quick 30
Hand Wash/
Wool
1. Cotton
No Drain
60˚C
Press the
Start/Pause(
) button.
Baby
washer
ow to use
H
Care
Cotton
Bio Care
Bedcover
Medic Care
Rinse
Eco
Intensive
Delicate
Synthetic
No Drain
Rinse+
Pre Wash
Quick 30
Hand Wash/
Wool
(1)
(2)
(3)
(4)
Dial
Rinse+Spin
:
Program
Button
Dial
Crease Care
:
:
(5)
(6)
(7)
(8)
Start / Pause
Spin
Button
:
Bio
Button
:
Intensive
Button
:
Rinse+
Button
:
Pre Wash
Button
:
Crease Care
(9)
(10)
(11)
Child Lock
Button
:
Power
Button
:
Time
Delay
Option
?
Medic Care
Rinse
By turning
button,
all
the
Option
Option
functions may be
selected.
Intensive
Rinse+
3. Rinse+
?
For additional rinse which may assist in
traces of detergent residue.
removing
?
Pre Wash
By selecting Rinse+ function,
time and the rinse water
are
the rinse
increased.
Crease Care
1. Medic Ca
?
re
Rinse
For
high effectiveness or more purity in
operation you can choose Medic
Care Rinse option. It can be chosen in all
courses with the exception of Hand
4. Pre Wash
rinse
Wash/Wool, Delicate, Quick
30.
?
If the
laundry
course
?
is
heavily soiled,
"Pre Wash"
is effective.
Pre Wash is available in Cotton and
The
required lamp
will
Synthetic.
light up for identification.
2. Intensive
?
?
If the
laundry is heavily
option is effective.
By selecting
soiled "Intensive"
?
the Intensive
time may be extended,
program selected.
5. Crease Care
option, the wash
depending on the
If you want to prevent creasing, select this
button with spin speed.
15
ow
H
to
use
washer
Spin
?
By turning
the
Spin dial,
the
spin speed
can
be chosen.
No Drain
Spin only:
1. Press the Power buton.
No Drain
2. Set the desired
the
Spin
spin speed by turning
Dial.
3. Press the Start/Pause button.
1.
Spin selection
is available
Spin Speed
?
the program
-
as
2. No spin
according
to
follows.
Cotton, Rinse+Spin, Quick 30, Bio Care
NoSpin-NoDrain-400-600800
-
-
1000
-
Synthetic
NoSpin-NoDrain-400-600-
spin is selected,
draining water.
The
required lamp
identification.
will
the washer stops
light up for
3. Rinse Hold
1000
?
-
If No
after
1200
Hand Wash/Wool,
800
?
Delicate, Bedcover, Baby Care
NoSpin-NoDrain-400-600-800
Is selected
by turning
repeatedly
this function leaves clothes in
the
spin
dial
the machine; suspended in the water
after a rinse without entering into spin.
?
To
proceed
after
to a Drain or
Spin
function
Rinse hold, select Drain on the
program dial or press the Spin selector
a
button to the desired
speed,
then press
the Start/Pause button.
The
required lamp
identification.
16
will
light up for
H
ow
to
Water
use
washer
Child Lock
Temp.
Baby Care
Cotton
Bio Care
Bedcover
Eco
Delicate
Hand Wash/
Wool
If you choose to lock the buttons on the control assembly
prevent tampering this function may be selected.
Synthetic
to
Quick 30
1. Child Lock
Rinse+Spin
?
?
the
By turning
temperature
-
the water
Program Dial,
can
Child Lock
can be set by pressing the
Rinse+ button and Pre Wash button
simultaneously. (About
be selected.
three
seconds)
Cold
-30˚C/40˚C/60˚C/95˚C
?
Water temperature can be selected
according to the program.
?
The
required temperature lamp
for identification.
For the
more
refer to
the page13.
detailed
will
light up
?
information, please
When child lock is set, all buttons
simultaneously again. (About
?
are
locked
except for power button.
To deactivate Child Lock system, press
Rinse+ and Pre Wash buttons
To
change
three
seconds)
to the desired program, whilst
in child lock mode.
Rinse+ and Pre Wash together
again. (About three seconds)
1. Press both
once
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
?
again.
The child lock can be set at any time and
it is automatically canceled when
operational errors occur. Also Child Lock
works when power is off.
17
H
to
ow
use
Time
washer
Delay
Program
Baby Care
Cotton
Bio Care
Bedcover
Eco
1. Time
Delay
Delicate
Preparing washing before starting
"Time Delay"
Turn on the water tap.
Load laundry and close the door.
Place the detergent and fabric softener
Synthetic
Quick 30
Hand Wash/
Wool
Rinse+Spin
-
-
?
-
?
?
How to set "Time
-
-
Delay"
Turn the
Program
desired time.
?
Press the Start/Pause button.
If Time
is
Lamp
1.
Delay button is pressed, "3:00"
displayed. The maximum delayed time
is 19 hours and the minimum time is
3 hours.
?
pressing of the button
time delay by one hour.
To cancel the time
-
Time
delay,
press the
cycle or
Spin).
?
'expected time' from the
completion of washing
selected process (Wash, Rinse,
Delay
present
is
to the
According to
the condition
of water supply
and temperature, the delayed time and the
actual washing time may vary.
18
light
up to indicate selected
pressed,
automatically
By turning the Program dial, the
program is selected in order of
Cotton
Eco
Synthetic Quick 30
"
--
advances
Power button.
?
to
When Start/Pause button is
--
Each
on
according
Program
--
?
will
the Cotton program is
selected.
(":" blinks.)
?
available
dial to select
the program you require.
Press Time Delay button and set the
-
are
laundry type.
program.
Press Power button.
-
10 programs
the
in the drawer.
--
For
--
Rinse+Spin
Delicate
--
--
--
Hand Wash/Wool
Bedcover
--
Bio Care
Baby Care".
information regarding laundary type
for each program, please refer to page 13.
ow
H
to
use
washer
Start/Pause
Power
1. Start
?
1. Power
This Start/Pause button is used to start
wash
cycle
or
pause the wash
?
Press the Power button to turn power
on
and off
cycle.
?
To cancel the Time
Delay function,
pressed.
the
power button should be
2. Initial
2. Pause
?
?
?
If temporary stop of wash cycle is
needed, press the Start/Pause button.
?
or
at the end of the wash
When the Power button is
pressed,
the
for Cotton program.
And the other initial conditions as
washer is
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
Program
ready
follows.
?
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
-
Cotton
Program / Main wash /
Normal Rinse / 1200 rpm / 60˚C
19
ow
H
to
use
washer
Display
3.
?
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1.
?
Special function display
"
4. Time left
?
When child lock is selected, the
is displayed.
delay is selected, it shows
remaining time to finish the selected
When time
the
During washing cycle,
displayed.
Recommended program
-
program.
-
-
2. Self
?
diagnosis display
If the machine encounters
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
a
fault
-
during
-
the associated fault will be
-
-
-
:
Water pressure
:
Problem of
sensing
error
-
overfilling
water
-
:
Door is not closed
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water temperature trouble
:
Over load in motor
:
Over load in motor
?
"
"
"
"
"
"
"
"
trouble
letters
displayed, please
refer to the troubleshooting page24 and
follow the guide.
20
error
are
remaining washing
?
by
manufacturer.
Cotton
(95˚C) : around 1 hour and 43 minutes
Cotton (60˚C) : around 1 hour and 39 minutes
Synthetic : around 1 hour and 16 minutes
Quick 30 : around 30 minutes
Rinse+
Spin
:
around 17 minutes
Hand Wash/Wool : around 51 minutes
Delicate : around 51 minutes
Bedcover
Bio Care
around 1 hour and 28 minutes
:
:
Baby Care
around 2 hour and 21 minutes
:
around 2 hour and 24 minutes
The
washing time may vary by the amount of
laundry, water pressure, water temperature and
other washing conditions.
If
an
unbalanced load is detected
or
if the suds
removing program operates, the wash time may
be extended.
(Max. increasing time
If these
the
time is
"
?
?
"
is 45
minutes.)
M
aintenance
Before
the washer interior,
cleaning
the electrical power cord to avoid electrical
unplug
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
-"
"
detergent
-
message will blink
error
If your water is very hard
become
on
the control
panel
when water does not enter the
drawer.
clogged.
a good
It is therefore
or
contains traces of lime
deposit,
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the filter
CAUTION
is clean to
tangled
Be careful when
or
opening
using "Drain" program and
or foreign objects.
draining if the water is hot.
the door in
2.
an
cleaning
plug ( ),
coin. Turn the drain
this time
use a
plug ( )
water
out
the hose.
flowing
carrying
out emergency
emergency.
the drain
the water to flow out. At
pull
machine.
then open the pump filter to
the drain pump,
Unplug
allowing
Open the lower cover
cap ( ) by using a
to
laundry.
running of your
threads
Allow the water to cool down before
1.
left in the
smooth
First drain the water
remove
emptying
objects
ensure
vessel to prevent
on
to the floor. When
3. Remove any
foreign
from the pump filter
cleaning,
After
( )
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
( )
( ).
turn the pump filter
water does not flow any more, turn
open to the left.
material
original place.
cover
cap.
100
3
1
2
3
2
21
aintenance
M
drawer
Dispenser
After
?
?
?
a
while
detergents
and fabric softeners leave
It should be cleaned from time to time with
a
jet
of
a
deposit
running
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
water.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
The drawer
Detergent
can
be cleaned
?
recess
also accumulate inside the
with
occasionally
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
max
washing
replace
?
?
which should
the drawer and
run a
drum
If you live in a hard water area, limescale may
seen and thus not easily removed.
Over time the build up of scale clogs
maintenance or repairs may result.
?
recess
old toothbrush.
continuously
appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places where
in check,
of rust
can
expensive
be caused
Remove any spots with
Never
22
use
steel wool.
a
stainless steel
damage part
are
of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler may contain chemicals that may
it cannot be
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
Repeat
process if necessary.
NOTE
Remove hard water
water.
deposits using only
cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
properly grounded
of nontoxic recreational
water from hoses.
electrical outlet.
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
T roubleshooting guide
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
This
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
out of balance.
If not removed
been removed?
Are all the feet
the
probably
Stop
and
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
leaks, and vibration during spin.
Oversudsing
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
?
drains
24
slowly.
Drain hose is kinked
or
clogged.
or
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
on
by a qualified electrician.
water supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
25
T roubleshooting guide
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
Water
supply is not adequate in area.
supply taps are not completely open.
Water inlet hose(s) are kinked.
The filter of the inlet hose(s) are clogged.
Check another tap in the house.
Water
Fully open tap.
Straighten hose(s).
Drain hose is kinked
Clean and
The drain filter is
Clean the drain filter.
or clogged.
clogged.
Check the filter of the inlet hose.
straighten
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
imbalance detection
and correction system. If individual heavy
articles are loaded (ex. bath mat, bath robe,
?
Solution
or
the drain hose.
2 similar items to
help
load to allow proper
etc.) this system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end of the
cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
Close the door.
?
Is the door
opened?
If
"
"
is not released, call for
service.
Unplug
the power
plug
service.
?
Water overfills due to the
faulty water valve.
Close the water tap.
Unplug the power plug.
Call for service.
?
?
?
26
Water level
sensor
Over load in motor.
Over load in motor.
has malfunctioned.
and call for
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
If the fault is caused
If the fault is caused
voltage
the
product.
other than that shown
by accident, neglect,
by
use
misuse
or
on
the
Act of God.
factors other than normal domestic
in
use or use
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
by
of
product
pests for
or
change
example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
?
?
?
Replace fuses
wiring
or
correct house
product
(Example
:
the
plumbing.
repairs.
Incidental or consequential damage to personal property
possible defects with this appliance.
If this
including
example, grit, nails, bra wires, buttons etc.
in or correct house
Correction of unauthorized
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
?
by
caused
by
is used for commercial purpose, it is not warranted.
Public
places
such
as
public bathroom, lodging house, training
center, dormitory)
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
a
27
Download PDF