LG | WD-1247RD | LG WD-1247RD Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-1247RD
WD-1248RD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Direct Drive
System
The advanced Brushless DC motor
belt and
directly
drives the drum without
pulley.
Water Circulation
Sprays detergent
Clothes
are
solution and water onto the load
soaked
more
quickly
over
and
and
thoroughly during
more easily by the
The
detergent suds can be removed
cycle. The water circulation system uses
cycle.
water shower
both water and
Large Door Opening
large opening make it possible
clothing more easily.
over.
wash
detergent
during rinse
efficiently.
more
Tilted Drum and Extra
Tilted drum and extra
and unload
to load
Steam
Washing and Refresh
Washing features upgraded washing performance with low energy
consumption. Refresh cycle removes wrinkles from dry clothes.
Steam
water
and
RollerJets
Washing ball enhances the wash performance and reduces damage
clothing. The jets spray and help tumble clothes to enhance
washing performance while maintaining fabric care.
to the
Automatic Wash Load Detection
detects the load and
Automatically
optimizes
the
time.
washing
Built-in Heater
Internal heater
helps
to maintain water
temperature
at its
optimum
level for selected
cycles.
Child Lock
The Child lock
prevents children from pressing any button
to
change
the
settings
during operation.
C
ontents
......................................................................................................................3
Warnings
Specification.................................................................................................................. .5
Installation
...................................................................................................................
Care before
...6
washing....................................................................................................12
Adding detergent..........................................................................................................13
Function
How to
....................................................................................................................14
use
washer ......................................................................................................15
Maintenance ................................................................................................................25
Troubleshooting guide
Terms of
2
Warranty
.................................................................................................28
.......................................................................................................32
W arnings
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING
the
?
:
fire, electric shock,
or
injury to persons
or
store the washer where it will
combustible
exposed to the weather.
Do not
Do not
tamper with controls.
ignite
or
a
repair or replace any part of the washer
attempt any servicing unless specifically
recommended in the user-maintenance
instructions
or
?
that you understand and have the skills to carry
out.
?
?
?
?
Keep the area underneath and around your
appliances free of combustible materials such
?
?
as
etc.
?
supervision is necessary if this appliance
is used by or near children or infirm persons.
Do not allow them to play on, with, or inside this
or any other appliance.
Keep washer away from fire.
Do not leave the washer door open.
An open door could entice children to
the door or crawl inside the washer.
hang
Never reach into washer while it is
moving.
completely stopped.
The
laundry process
retardant of fabrics.
Do not wash
cleaned
or
dry
can
substances
(such
as
Do not slam the washer door closed
or
try to
To minimize the
this
possibility of electric shock,
appliance from the power supply or
disconnect the washer at the household
distribution
?
Wait
?
?
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
Dryer is intended for only drying textile material.
If the washer has been exposed to water, call an
authorized service provider to avoid any risk of
fire
articles that have been
or
explode. Oil may remain in the tub after
cycle resulting in fire during drying. So,
Always follow the fabric care instructions
supplied by the garment manufacturer.
unplug
on
reduce the flame
in, washed in, soaked in,
or
whole
force the door open when locked. This could
result in damage to the washer.
Close
until the drum has
explosive
do not load oiled clothes.
published user-repair instructions
lint, paper, rags, chemicals,
or
oil, paint, gasoline, degreasers, dry
cleaning solvents, kerosene, etc.) which may
?
?
using
wax,
?
?
when
washer, follow basic precautions, including the following:
Do not install
be
To reduce the risk of
or
electric shock.
spotted with
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
W arnings
To minimize the risk of fire in
?
Items that have been
a
tumble
dryer,
the
following
spotted or soaked with vegetable
placed in a tumble dryer.
or
should be observed:
cooking
oil constitute
a
fire
hazard and should not be
Oil-affected items
sources
Such
as
can
in
a
ignite spontaneously, especially when exposed to heat
dryer. The items become warm, causing an oxidation
tumble
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
enough to catch fire. Piling, stacking or storing oil-affected items can
become hot
prevent heat from escaping and
so
create
a
fire hazard.
If it is unavoidable that fabrics that contain
vegetable or cooking oil or have been
contaminated by hair care products be placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The 'cool down' cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
?
?
Items that have been previously cleaned in, washed in, soaked in or spotted with
petrol/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
Items
containing
foam rubber
foam) or similarly testured
dryer on a heat setting.
heated, produce fire by spontaneous combustion.
(also
known
as
rubber. like materials should not be dried in
Foam rubber materials can, when
?
Fabric softeners
a
latex
tumble
products should not be used in a tumble dryer to eliminate
electricity unless this practice is specifically recommended by the
the fabric softener or product.
or
similar
the effects of static
manufacturer of
?
Undergarments
dryer.
that contain metal reinforcements should not be
placed
Damage to the tumble dryer can result if metal reinforcements come
drying. When available a drying rack could be used for such items.
?
Plastic articles such
be
?
placed
in
a
as
tumble
shower caps
or
babies
waterproof napkin
loose
covers
a
tumble
during
should not
dryer.
Rubber-backed articles, clothes fitted with foam rubber pads,
placed in a tumble
rubber-coated tennis shoes should not be
4
in
pillows, galoshes
dryer.
and
S pecification
Inlet Hose
Name
Power
supply
:
Front
:
220-240V~,50Hz
loading washing
Size
:
635mm(W)
Weight
:
80kg
Wash
:
9kg(2200W)
Dry capacity
:
5kg(2200W)
Max. Watt
:
2200W
Spin speed
:
No
Water
:
capacity
consumption
Permissible water pressure
supply
temperature : 4-25˚C
Appliance complies
x
925(H)
Spin/400/800/1000/1200
Permissible cold water
:
720mm(D)
87ℓ(9.7ℓ/ kg )
:4.5~145PSI(0.03~1MPa)
The external hot water
TT
x
machine
must not exceed 70°C
with the
requirement by
certification
Type
Test Mark.
No further backflow
The
protection required for connection to the water supply.
appearance and specifications may be varied without notice to improve the
Specifications subject
to
change by
units
quality.
manufacturer.
Accessories
Inlet
hose(2EA)
Spanner
5
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin,
pay
all times.
particular
are areas
attention to
Any damage which may
appliance guarantee.
be
cause
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition at
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
?
is fitted with transit bolts to
appliance
and all transit bolts must be
Packing
removed before
When
to
prevent internal damage during transport.
using
unpacking
remove
support in
packing.
the washer.
the base, be
the additional
sure
Washer
packing
the middle of the base
Packing Support
Base
Removing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
along
with the rubber
2. Unscrew the 4 bolts with
the spanner
6
supplied.
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
not removed, it may cause
noise and malfunction.
are
vibration,
Packing
heavy
?
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
nstallation
I
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1°
:
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with
more
than
one
appliance.
Laundry
Tub
Additional Clearance
:
For wall, door and floor modeling is required.
(10cm : rear / 2cm : right & left side)
approx.
2cm
Do not place
any times.
They
can
or
store
laundry products
the finish
damage
or
on
top of washer
at
controls.
Positioning
Install the washer
on a
flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
Before placing the washer on tiles, apply a rubber mat under the feet.
?
Never try to correct any
washer.
?
unevenness
in the floor with
pieces of wood,
cardboard
or
similar materials under the
If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.
?
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of
?
?
a
breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
?
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
must be earthed
Green and Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or
by the
earth
symbol
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
(BS 1363) plug
is
used, fit
a
coloured Black.
or
coloured Red.
13 amp BS 1362 fuse.
7
nstallation
I
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
2. If the
3.
4. Connect the machine to
5. The
?
?
?
appliance
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
or
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting
water
supply
hose
▶Water
supply pressure must be between 0.03MPa and 1MPa
(0.3~10kgf/cm)
▶Don't strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1MPa, a decompression
2
device should be installed.
?
Two rubber seals
are
?
?
?
in order to
are
supplied
prevent
with the water inlet hoses these
water leaks.
Check water tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the
hose if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
?
?
▶When your washer has two valves,
The Inlet hose which has red connector is for the hot water tap.
If the washer has two valves, the energy is saved by using hot
valve.
8
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the
screw
to
screw
2. Push the
rubber
tap.
connector up till the
packing
with the
type inlet hose
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
tap. Then
tight contact
tighten the 4
screws.
Normal Tap without thread &
1. Un tighten the upper
connector
touch type inlet hose
one
2. Push the upper
the rubber
screw.
contact with the
Upper
Rubber
Connector
Fixing
tighten
packing
screw
Middle
the 4
Rubber
connector
connector up till
packing
is in
3. Connect the
water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
Connector
tap is
Water
hose
Middle
guide plate.
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
Square tap
9
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
if the machine is to be left for any length of time
floor drain(gully) in the immediate vicinity.
stopcock
if there is
especially
When disposing
(e.g. holiday),
no
of the
cut off the mains cable, and destroy the Plug.
prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
appliance,
Disable the door lock to
of suffocation !
all
Keep
a
risk
well away from children
packaging
Installation of drain hose
about 100
about 145
cm
cm
?
When
installing the drain hose to a sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage should the drain hose
secure
max.10cm min.60cm
about 105
?
cm
become loose.
Laundry tub
about 100
cm
Hose
Retainer
about 145
cm
Tie
max.
about 105
?
The drain hose end should not be
than 100
?
cm
the drain hose will
due to water
When the drain hose is too
long,
back into the washer. This will
noise, malfunction, and
10
placed higher
above the floor.
Proper securing of
damage
floor from
?
min.60cm max.10cm
cm
water
protect the
leakage.
do not force
cause
abnormal
leakage.
100cm
min. 60cm
strap
max.
100cm
min. 60cm
I
nstallation
Level
adjustment
1.
the
Adjusting
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
appliance
of the
a corner
Timber
NOTE
solid and level floor surface,
on a
preferably
in
room.
suspended type flooring
or
excessive vibration and unblance
may contribute to
errors.
2. If the floor is uneven,
adjust the adjustable feet as required. (do
feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
not insert
※
pieces
In the
NOTE
of wood etc. under the
case
platform,
that the
washing machine is installed
securely fastened in order
risk that it might fall off.
on a
raised
it must be
to eliminate the
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the
machine should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
?
Position each foot
Tile floors
on a
clean, dry and level.
(Slippery floors)
on
sections and stick the
Tread Mate is
※
be
must
flat hard floor.
a
the Tread Mate and level the machine
pieces
on
to
the
to suit.
tile where machine is
dry
self adhesive material used
on
to
(Cut Tread
be
Mate into 70x70
placed.)
ladders & steps that prevents
slipping.
Rubber
Wooden floors
?
If
?
possible
Cup
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
at least 15mm thick under the washer, secured to at least 2 floor beams with
?
mm
install the washer in
one
of the
corners
※
Insert the rubber cups to reduce vibration.
※
Rubber cups
( p/no.
4620ER4002B
)
can
be
of the
room,
purchasedfrom
※
screws.
where the floor is
the LG spare parts
more
can be
purchased from
hardware suppliers.
It
stable.
department.
Important!
?
Proper placement and levelling of the washer
?
The washer
must
be
absolutely horizontal
?
It must not "Seesaw"
?
The installation surface
?
Do not let the feet of the washer
across corners
must
be
long, regular and
firmly in position.
ensures
and stand
reliable operation.
under load.
clean, free from floor wax and other lubricant coatings.
get wet. If feet of the washer get wet,
slipping
may
occur.
11
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C,
clothing.
a
without
This will
remove
add
a
half load of
allow the unit to wash
detergent)
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
a care
label
on
your clothes. This will tell you about the fabric content of your
garment and how it should be washed.
2.
Sorting
To
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
temperature and spin speed and different fabrics need to be washed in different ways.
Water
Always
transfer
sort dark colors from
soiled items with
Soil
3.
pale colors and whites. Wash separately as dye and lint
causing discoloration of white etc. If possible, do not wash heavily
lightly soiled one.
can occur
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Separate
Separate
Lint
Wash lint
Caring
before
to amount of soil.
according
producers
separately.
and lint collectors
loading
Combine large and small items in
than half the total wash load.
Do not wash
clothes
white fabrics from colored fabrics.
single
a
items. This may
load. Load
cause an
?
large
items first.
items should not be
Large
out-of-balance load. Add
one or
more
two similar items.
Check all
pockets to make sure that they are
empty. Items such as nails, hair clip, matches,
pens, coins and keys can damage both your
washer and your clothes.
?
Close
zippers,
hooks and
strings
that these items don't snag
?
on
to make
sure
other clothes.
Do not be stuck between the door and the
glass.
?
Pre treat dirt and stains
detergent
collars and cuffs to
?
If you wash
help
underwear,
bag. If you don't use the
washing the underwear,
make
12
a
by brushing
a
little
dissolved in water onto stains like
noise.
shift dirt.
use
the wash cloth
wash cloth
bag
while
wires in the bra may
A dding detergent
Adding detergent and fabric softener
3. Detergent
1. The Dispenser Drawer
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
?
If too
much
can occur
detergent is used,
too many
and this will decrease the
heavy load to the
(Causing malfunctions)
result
?
?
?
Main wash
or cause
If there are too many suds,
quantity must be reduced.
Use
the
suds
washing
motor.
detergent
specified Front loader washing powder
only.
only
?
?PreWash+MainWash
Detergent usage may
for water
temperature,
need to be
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
Tips
Full load
according
:
to
manufacturer's recommendation.
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Softener will
?
Detergent is flushed from the dispenser
beginning of the cycle.
automatically
cycle.
2
days.
be added
the last rinse
The soap drawer can be partially
opened to add pre dissolved soap
powder during
?
1/2 of full load.
Do not leave the fabric softener in the
during
?
:
the
detergent drawer for more than
(Fabric softener could harden)
?
3/4 of the normal amount.
early dispensing
of the fabric softener which could stain
?
:
Minimum load
the initial fill.
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the clothes
directly
13
at
F
unction
Recommended
Fabric
Program
Cotton
Color fast
according
courses
Type
to the
Proper
Temp.
(Option)
(Cold,
30˚C, 40˚C,
Polyamide, Acrylic,
40˚C
Baby
Lightly
soiled
baby
95˚C)
(Cold,
30˚C, 60˚C)
95°C
wear
Option
Load
Pre Wash
Rating
138
5.0kg
92
6.0kg
184
5 items
20
4.0kg
84
3.0kg
72
3.0kg
72
5.0kg
30
in
Minutes
Rinse+Spin
Dry Only
Less Steam
Eco Steam
Turbo Steam
Intensive
Cotton mixed,
Refresh
Polyeter mixed
(It just makes
clothes easy to iron)
Dress shirts, blouses
wrinkled
Delicate laundry easily
damaged.
Delicate
with pure
new
wool
only.
Hand
"Hand Wash" marked delicate
Wash
and wool
Quick 30
Colored
lightely
Cotton
laundry.
Landry
40˚C
(Cold, 30˚C)
with
with
Intensive
Pre Wash
:
30˚C
(Cold, 40˚C)
filling,
light filling.
Temperature
If the
Rinse+Spin
Dry Only
Intensive
40˚C
Rinse+Spin
(Cold, 30˚C)
Intensive
washing full load or heavily
choosing intensive option.
:
Intensive
Select the water temperature to the wash cycles.
Always follow garment manufacture's care label or
laundering.
When
:
Rinse+Spin
30°C
which is
duvet, pillow, blanket, sofa
cover
30˚C
(Cold, 40˚C)
(Cold,40˚C)
soiled fast.
bedding
Turbo Steam
--
Wool/Silk Machine washable woolens
laundry
is
soiled
laundry, you
can
1
king size
(9 Tog)
84
instructions when
increase effectiveness
heavily soiled, "Pre Wash" option is recommended.
Cotton, Synthetic and Baby Care Program.
Pre Wash is available in
14
Maximum
40°C, 60°C)
Care
Water
Time
Additional
60˚C
garments
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton (underwear...)
Synthetic Polyester.
Duvet
laundry type
by
ow
H
1. Cotton
to
use
washer
2. Manual
automatically
selected upon power
on.
?
Press the
washer
?
Press the
?
Press the
?
Power(
)
Start/Pause(
?
)
button.
-
-
-
:
Water
temperature
Spin
1200 rpm
:
Program
:
Cotton
Select the desired
pressing
:
)
button to turn the
60°C
cycle
with the
program dial and if required, make any
changes to the washing conditions by
Normal
Rinse
Power(
on.
button to start.
Initial condition
-
Selecting
the buttons
accordingly.
selecting the each conditions, please
refer to the page16~page24
For
?
Press the Start/Pause button to
commence
the
cycle.
15
H
ow
to
use
(1)
washer
(2)
(1)Button: Power
(2)Dial: Program
(3)Button: Start/Pause
(4)Button: Option
(3)
(4)
(5)
(5)Child lock
(6)Button: Rinse
(7)Button: Temperature
(8)Button: Intensive
(6) (7)
(8, 9, 10)
(11) (12)
(9)Button: Favorite
(10)Button: Time Delay
(11)Button: Spin
(12)Button: Turbo Steam
Power
(13)
(13)Dial: Dry
Program
1. Power
?
Press the
power
?
on
Power(
To cancel the Time
Power(
)
button to turn
and off.
)
Delay function, the
pressed.
?
button must be
2. Initial Program
?
Power(
) button is pressed,
washer is ready for Cotton program.
And the other initial conditions
?
as
Initial program
Cotton
Program
1200rpm
16
Dial
lamp
will
light
according
to the
up to indicate selected
When
-
By turning
the
Program dial,
selected in order of "Cotton
Delicate
--
--
Quick 30
For
/ Rinse:Normal / 60°C/
) button is pressed,
automatically
Start/Pause(
the Cotton program is
selected.
follows.
So, if you want to advance into the
washing cycle without changing the
program, just press Start/Pause(
)
button and then the washer will proceed.
-
available
program.
When the
the
are
laundry type.
?
?
9 programs
Wool/Silk
--
--
Refresh
the program is
--
Synthetic
Hand Wash
--
Baby
--
Care".
information regarding laundry type for
please refer to page 14.
each program,
--
Duvet
H
ow
to
use
washer
Option
Start/Pause
?
By pressing
the
button, only
one
option
option
function may be selected.
NOTE:
1. Start
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
cycle.
2. Pause
?
Depending on the selected
cycle, not all
Options may be selectable.
program
If
temporary stop of wash cycle is needed,
1. Pre Wash
?
When in Pause, the power is turned off
automatically after 4 minutes.
option
for loads that need
pretreatment. This adds 17 minutes of pre
washing before draining.
press "Start/Pause" button.
?
Use this
-
When
using Pre Wash option, do not
liquid detergent for the main wash.
Use powder for the main wash.
use
a
?
Available in Cotton,
Baby Care.
2. Rinse
?
Use this
3. Dry
?
+
Synthetic
and
Spin
option
to rinse and then
spin
Only
When you want dry only, select the this
option. Available in Baby Care, Cotton,
Synthetic and Quick30.
4. Less Steam
?
When you want to do a steam wash for
only a small amount of laundry, select the
this
opton.
5. Eco Steam
?
When you want to do a steam wash to
reduce the electricity consumption, select
this
opton.
17
H
to
ow
use
washer
Rinse
Child lock
?
By pressing
the Rinse
button, the Rinse type
can
be selected.
-
Normal
If you choose to lock the buttons on the
control assembly to prevent tampering, this
-
Rinse +
-
Medic Rinse
function may be selected.
-
Normal+Hold
-
Rinse + +Hold
?
Child lock
can
be set
by pressing
and
holding the Option and Rinse button
simultaneously. (About three seconds)
1. Normal
?
Cotton
(forfull load),Synthetic,Duvet,Baby
Care performs 3 Rinses
?
?
When child lock is set, all buttons
are
inoperable except for power button.
?
To deactivate Child lock
and hold the
system, press
Option and
simultaneously again.
(About three seconds)
Cotton (for part load), Delicate, Wool/Silk,
Hanwash, Quick 30 performs 2 Rinses.
2. Rinse + & Medic Rinse
?
Rinse button
Used to additional
in
?
rinse, which may assist
traces of
removing
By selecting
Rinse
+
detergent
or
residue.
Medic Rinse
function, the Rinse Time and the Rinse
water are increased.
?
Medic Rinse heats the water to 40
Deg
in
the last rinse.
?
To
change
to the desired program, whilst in
child lock mode.
3. Rinse Hold
1. Press and hold both
Option
and Rinse
button to cancel the child lock.
(About
three
?
by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
?
To
seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
Is selected
a
Change
the desired
program
dial
The child lock
is
automatically
errors occur.
18
be set at any time and it
canceled when operational
can
or
speed,
The
?
proceed
Rinse
to a Drain or
Spin
hold, select Drain
function after
the program
button for the desired
on
press the Spin
then press the Start/Pause button.
matching indicator lamp
identification.
will
light up for
H
ow
to
use
washer
Spin
?
Water Temperature
By pressing the Spin button,
spin speed can be chosen.
the
?
By pressing
button, the
the
Temp.
water
temperature
can
be
selected.
-
Cold
-30˚C/40˚C/60˚C/95˚C
?
1. Spin selection
Spin speed
?
as
-
-
is available
according
to the program
-
follows.
-
NoSpin--400--800--1000--1200
Baby Care & Synthetic & Wool/Silk
be selected
as
below
Cotton
Synthetic
Cold
&
-
30°C
--
40°C
--
--
60°C
Delicate & Wool/Silk & Handwash &
Quick30 & Duvet
Cold
Delicate
-
NoSpin--400--800
--
Baby
40°C
30˚C
--
40˚C
Care
--
60°C
--
95°C
The required temperature lamp
identification.
2. No spin
For the
If "No
Spin" is selected, the washer stops
draining the water from the last spin.
The matching indicator lamp
identification.
can
to the program.
Cold--30°C--40°C--60°C--95°C
Cotton & Quick30
NoSpin--400--800--1000
?
temperature
according
Handwash & Duvet
-
Water
will
light
after
more
detailed
will
light
up for
information, please refer to
the page14.
up for
19
H
to
ow
use
washer
Time
Favorite
?
?
Delay
Favorite program allows you to store a
customized wash cycle for future use.
To make
1. Select
Favorite program:
a
Preparing washing before starting
Turn on the water tap.
cycle.
a
2. Select
The course,
washing method, Rinsing
method, spin speed,
dry,
"Time
Delay"
-
water
temperature,
-
-
turbo steam etc.
Load
laundry and close the door.
detergent and fabric softener
Place the
in
the drawer.
3. Press and hold Favorite button for 3
seconds
(1 beep
will
sound).
?
The Favorite program is now stored for
future use. To reuse the program, select
Favorite program and press Start/Pause.
How to set "Time
-
-
-
Delay"
Power( ) button.
Turn the Program dial to select
the program you require.
Press Time Delay button and set
Press
Intensive
-
Press the
"
("
?
?
?
washing full load or heavily soiled
laundry, you can increase effectiveness
by choosing intensive option.
By selecting
wash time may be
on the program selected.
?
To
this
use
button
once
press the Intensive
before the wash program is
)
button.
If Time Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
hours.
?
Each pressing of the
delay by one hour.
?
To cancel the time
the
option,
extended, depending
Start/Pause(
lamp is blink)
19:00 hours and the minimum time is 3:00
When
the Intensive
the
desired time.
Power(
option
?
started.
Time
or
?
delay, press
the
button.
)
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
present
button advances time
is
to the
selected
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
20
may vary.
ow
H
to
washer
use
Refresh
Turbo Steam
For
?
tough
stained clothes,
or baby clothes.
underwear,
?
been stored for
Baby Care, Cotton, Synthetic,
This
Refresh.
iron
option features upgraded washing
performance with low energy and water
consumption.
Do not load delicates such
?
and
easily
as
cycle makes wrinkled clothes
(Do not load wet clothes).
efficient. There should be
no
visible
How to
1. Turn
on
Refresh
use
cycle
the washer and select the
Refresh program.
or less and close the door.
[Precautionary Notes]
The Refresh cycle is not like
drying cycles.
-
during
the Steam Wash
function.
-
Steam spray may not be seen clearly
through the door; however, the washer is
spraying
steam
strongly
the steam
inside.
operation,
a
spraying
sound will be heard. This is not
a
can cause severe
-
burns.
fibers, this
for 100% cotton
clothing before using the
cycle to prevent permanently setting
stains by high heat.
Be
sure
that the
little water to
Steam
or
Remove stains from
the
-
CAUTION
washing
Refresh
malfunction.
Do not reach into the washer while
other
Due to the characteristic of cotton
cycle is not recommended
clothing.
-
During
!
easy to
2. Load 5 items
The concentrated steam wash function is
water level
-
clothes which have
extended time.
3. Press the Start/Pause button.
highly
-
an
Wrinkles will be reduced.
?
wool, silk,
discolored clothes.
NOTE:
-
cycle
slightly wrinkled
Steam Wash is available with
This
?
Refresh
For
?
tap is open. This cycle
produce steam.
Be careful not to touch the door. It
can
uses a
be very
hot.
operating.
-
Do not open the door while operating.
can cause severe burns.
Steam
-
After
removing
clothes from the Refresh
cycle
may feel slightly damp wait at least 10
minutes before putting the clothes on.
they
-
Best result
are
achieved when articles
similar size and fabric
type.
(avoid loading more than 3 dress
loading up to 5 Items.)
!
-
of
shirts if
CAUTION:
Do not reach into the washer while
Steam
-
are
Do not overload
can cause severe
Keep pets
operating.
burns.
away from the washer.
21
H
to
ow
washer
use
Dry
NOTE
The maximum
drying capacity for this
loading, please
maximum drying capacity
model is
use
the
When
5kg.
indicator behind the door
as
shown
Automatic
1.Drying
?
below.
guide
Use your Automatic Cycles to dry most loads.
Electronic sensors measures the temperature
of the exhaust to increase
decrease
or
drying
temperatures for faster reaction time and
tighter temperature control.
?
Recommend Automatic
clothes
5kg
a)
b)
c)
d)
5
For
drying
course
for
type.
Synthetics
select
-
Low
Temp.
If you want to iron clothes-Iron.
For Cottons select Normal.
-
For washable
nappies
select
-
More
NOTE: The estimated
drying time varies
drying time when in the
Automatic mode. The type of fabric, size of the
load, and the dryness selected, do affect the
drying times.
from the actual
The standard
?
Do not overload above the maximum
capacity indicator.
tumble freely.
?
This
?
For most
drying
Sorts of
drying
the clothes load
are
,
make
sure
similar in material and
the dial, you can select.
Normal More 30 60 90 120 150
Single
weight
Short-
Diaper
Shirt
100g
200g
300g
Underwear
Nightclothes
Jean
50g
500g
1200g
sleeved
By turning
Low
?
laundry
all articles in
thickness.
?
laundry weight which shows
laundry to put into the washer.
Items must be able to
washer-dryer's automatic process from
washing to drying can be selected easily.
even
how much
Temp
Iron
After the end of
dry,
By pressing
laundry
"
"
is
displayed.
the "Start/Pause" button the
program can be ended. If you not press the
"Start/Pause" button, the
cycle will end
"
automatically
22
Sorts of
after 4 hours.
"
Single
weight
to
ow
H
use
washer
2. Manual Drying time
By turning
?
can
the
Dry button,
the
3.Completion of Drying
guide
drying
?
time
be selected.
?
Drying course can last up to 150min. When
selecting drying only, drying course will
start after spining, unless the spin omitted.
These drying times are given as a guide to
help you set your dryer for manual drying.
Drying times can vary greatly depending on
dampness, room temperature and type of
fabric and your own experience will be your
best guide.
?
?
?
-
Some
The Cool Down
drying
are
is
operates periodically by
It rearranges and fluffs the load to
avoid wrinkles without heat for up to 4 hours.
"
?The"
the clothes
button is
message will continue to display until
removed or the Start/Pause
are
pressed within the 4
completed.
hours after the
has been
dry woolen articles. Pull them
original shape and dry them flat.
woven
Door Lock
and
Always stretch ont these type
immediately after drying.
Do not overload your
Take out
the
of
garments
Synthetics
Always
or
Lights
whenever the door of the washer is
locked.
as soon
to reduce wrinkles.
Leather Materials
?
The door
minute
can
be unlocked after
delay, pressing
button to
a
2~3
the Start/Pause
stop the washer.
check the manufacture's instructions.
Baby
Always
dryer
permanent press articles
dryer stops
Fiber
-
after the
loop knit materials may shrinks,
by varying amounts, depending on their quality.
as
-
will form if the clothes
tumbling.
?
-
creases
immediately
completed.
?
drying
Permanent Press and
-
Wrinkles and
Do not tumble
to their
-
drying cycle is completed,
[Cool
Down] is displayed on the Multi display.
The Cool Down is set automatically when a
drying cycle is complete.
not removed
Woolen Articles
-
"
"
When
clothes and
Night
Gowns
check the manufacture's instructions.
Rubber and Plastics
-
Do not
dry any items made from or
containing rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Fiber
-
glass
Do not
dry fiberglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time
you use the dryer and irri tate your skin.
23
ow
H
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
"
display
4. Time left
When Child lock is selected, the
lamp is on.
?
washing
""
?
After the end of
?
When time
dry,
"
"
is
?
displayed.
?
the
delay is selected, it shows
remaining time before the finish of
the selected program.
-
diagnose display
If the washer encounters
operation,
displayed.
"
"
:
"
"
"
"
"
"
"
"
"
"
"
"
"
fault
during
sensing
Problem of
:
Door is not closed
:
Over load in motor
:
Water inlet trouble
:
Drainage
:
Unbalanced load
overfilling
error
-
water
trouble
Water
temperature trouble
"
heater
Dry
or
Baby
around 20 minutes
:
Care
:
thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page31 and
follow the guide.
Cotton
:
around 2 hours and 18 minutes
Synthetic
:
Delicate
around 1 hour and 24 minutes
:
Wool/Silk
:
around 1 hour and 12 minutes
-
"
Refresh
around 1 hour and 32 minutes
-
Water pressure
:
24
-
the associated fault will be
:
:
"
a
by
around 3 hours and 4 minutes
-
?
Recommended program
manufacturer.
-
2. Self
During washing cycle, the remaining
washing time is displayed.
Hand Wash
:
around 1 hour and 12 minutes
-
-
?
Duvet
:
around 1 hour and 24 minutes
Quick30
around 30 minutes
:
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
conditions.
?
If
an
unbalanced load is detected
the suds
or
if
removing
program operates,
the wash time may be extended.
(Max. increasing
time is 45
minutes.)
aintenance
M
Before
the washer
cleaning
interior, unplug the electrical power cord
to avoid electrical shock to
avoid electrical shock hazards.
When
disposing of the appliance, cut off the mains cable,
prevent young children being trapped inside.
and
destroy the plug
Disable the door
lock to
The water inlet filter
"
-"
error
detergent
-
message will blink
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain the water
remove
tangled
Be careful when
using
threads
or
emptying
1.
opening
Open the lower cover
cap ( ) by using a
the door in
2.
this time
plug ( )
water
pull
out
the hose.
machine.
the drain hose and then open the pump filter to
cleaning
the drain pump,
carrying
out emergency
emergency.
use a
flowing
laundry.
running of your
foreign objects.
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
to
an
left in the
smooth
if the water is hot.
draining
Allow the water to cool down before
or
objects
ensure
vessel to
on
3. Remove out any
At
prevent
to the floor. When
cleaning,
material
After
( )
clockwise and insert the drain
)to the original place.
water does not flow any more, turn
plug (
close the lower
open to the left.
( ).
turn the pump filter
the pump filter
( )
foreign
from the pump filter
cover
cap.
3
1
2
25
aintenance
M
Dispenser drawer
After
a
while
and fabric softeners leave
detergents
deposit
?
It should be cleaned from time to time with
a
?
If necessary it
from the machine
can
be removed
downward and
?
The drawer
can
be cleaned
?
The
?
with
occasionally
washing
If you live in
seen
a
an
cleaning, replace
compartment
recess
the drawer and
drum
easily
repairs
continuously
build up in
where it cannot be
clogs appliances,
and if it is not
kept
in check,
expensive
may result.
The
use
places
removed.
?
If you
be removed.
run a
Although the washing drum is made of Stainless steel, specks of rust
articles (paper clips, safety pins) which have been left in the drum.
washing
can
which should
?
?
the catch
laundry.
Over time the build up of scale
or
by pressing
old toothbrush.
hard water area, lime scale may
and thus not
maintenance
of the fabric softener
also accumulate inside the
without
cycle
water.
running
recess
Once you have finished
rinse
in the drawer.
it out.
by pulling
cleaning, the upper part
To facilitate
Detergent
completely
jet
of
a
can
be caused
descalling agents, dyes
or
bleaches, make
Descaler may contain chemicals that may
Remove any
26
use
small metal
drum should be cleaned from time to time.
sure
they
are
suitable for
washing
use.
Never
by
spots
with
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
The water circulation nozzle & steam nozzle
?
Clean the water circulation
nozzle, if clogged.
Cleaning your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
cloth.
damp
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
through
Repeat process
NOTE
a
opening,
flexible
complete cycle using
Remove hard water
machine.
as
safe for
washing
instructions
If the washer is stored in
1. Turn off water
an area
where
freezing may
to
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
4. Add
glass.
deposits using only cleaners labeled
temperatures, follow these instructions
Plug
and door
if necessary.
Winterizing
3.
gasket
hot water.
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
9. To
remove
through
a
an
up
expelled.
cord, dry the drum interior, and close the door.
dispenser drawer,
8. Store washer in
for 1minute to drain out all water.
drain and
dry
excessive water from the
compartments.
right position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
27
T roubleshooting guide
This
washing machine is equipped with automatic safety functions
diagnose faults at an early stage and react appropriately.
When the machine does not function properly or does not function
following points before you contact your service provider.
?
all, check the
at
Possible Cause
Symptom
Rattling and
clanking noise
which detect and
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
redistribute wash load.
Have all the transit bolts and
packing
If not removed
been removed?
Are all the feet
the
If sound continues, washer is
out of balance. Stop and
probably
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
?
Over
There is
Clean the
the
something between
gasket and the glass.
the
sudsing
Water does not enter
washer
slowly
or
gasket
and
with the towel.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
leaks, and vibration during spin.
?
it enters
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
clogged.
28
glass
Fully
is not
hose(s)
are
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
T roubleshooting guide
Possible Cause
Symptom
Water in the washer
does not drain
drains
or
?
Drain hose is kinked
?
The drain filter is
slowly.
Washer does not start
?
or
Solution
clogged.
clogged.
Clean and
straighten
the drain hose.
Clean the drain filter.
Electrical power cord may not be
in or connection may be
plugged
Make
plug
sure
fits
tightly
in wall
outlet.
loose.
?
House fuse blown, circuit breaker
a power outage has
tripped,or
occurred.
Reset circuit breaker
Do not increase fuse
If
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
Close the door and press the
Start/Pause button. After pressing the
firmly
shut.
Start/Pause button, it may take
few moments before the clothes
a
washer
begins to spin. The door must
spin can be achieved.
lock before
Once started, the door
Door does not open
opened for safety
Wait
one or
can
not be
reasons.
two minutes before
opening the door to give the electric
locking mechanism time to release.
Display
on
stuck
6min left.
Check the
of clothes.
the condition of the clothes at
The
clothes
6min left to evaluate if
should be less then
This
dried
washing
or
machine checks
they
not. If the clothes
are
are
weight
weight of the
6kg.
not
dried, the washing machine will
further
dry for
display
will then continue to count
30min. The 6min
down after 30min.
29
T roubleshooting guide
Possible Cause
Symptom
Wash
cycle
delayed
time
?
It takes time to balance the
laundry
before the
spin cycle
Solution
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds
removing program works, the
wash time shall be increased.
Stop the wash and pull out the
laundry then put it again to untwist
Dry problem
?
Does not
dry
Do not overload.
Check that the washer is
properly to
extract
draining
adequate water
from the load.
Clothes load is too small to tumble
property. Add
30
a
few towels.
T roubleshooting guide
Possible Cause
Symptom
?
Water
?
Water
?
?
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Solution
Check another
tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet
hose(s).
clogged.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
appliance
or clogged.
clogged.
has
an
unbalance
detection and correction
system. If
or
straighten the drain
2 similar items to
Rearrange
spinning
hose.
help
load to allow proper
individual
heavy articles are loaded (ex.
etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
bath mat, both robe,
?
?
Is the door
Close the door
not
If
opened or
completely closed?
"
completely.
"is not released, call for service.
Unplug the power plug and call for service.
?
Water overfills due to the
faulty water
valve.
Close the water
tap.
Unplug the power plug.
Call for service.
?
Water level
?
Over load in motor.
?
Check water
sensor
has malfunctioned.
Turn the
supply.
If
plug
tap
on
is not released,
and call service.
unplug power
31
T
of Warranty
erms
What Is Not Covered:
?
Service
?
If the product
rating plate.
?
If the fault is caused
by accident, neglect,
If the fault is caused
by
?
trips
to your home to teach you how to
is connected to any
voltage
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
factors other than normal domestic
use or use
in
accordance with the owner's manual.
?
Provide instruction
?
If the fault is caused
?
Noise
or
on use
by pests
product
for
or
change
example,
rats
vibration that is considered normal for
sound, spin sound,
?
of
Correcting
or
the
or
set-up of the product.
cockroaches etc..
example
water drain
warming beeps.
the installation for
example, leveling
the
product, adjustment
of
drain.
?
Normal maintenance which recommended
?
Removal of
foreign objects
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
fuses in
by
example, grit,
correct house
Replace
?
Correction of unauthorized
?
Incidental
consequential damage to personal property
defects
with this appliance.
possible
?
If this
(Example
:
or
the
plumbing.
repairs.
or
product
wiring
correct house
?
or
including
nails, bra wires, buttons etc.
caused
by
is used for commercial purpose, it is not warranted.
Public
places
such
as
public bathroom, lodging house, training
center, dormitory)
If the product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
32
of
a
M
emo
33
M
34
emo
P/No.: MFL30138413
Download PDF

advertising