LG | WD-1255RD | LG WD-1255RD Owner’s Manual

P/No.: MFL30138407
Washing
Machine
OWNER'S MANUAL
WD-1255RD
WD-1256RD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Direct Drive
System
The advanced Brushless DC motor
belt and
directly
drives the drum without
pulley.
Water Circulation
Sprays detergent
Clothes
are
solution and water onto the load
soaked
more
quickly
over
and
and
thoroughly during
more easily by the
The
detergent suds can be removed
cycle. The water circulation system uses
cycle.
water shower
both water and
Large Door Opening
large opening make it possible
clothing more easily.
over.
wash
detergent
during rinse
efficiently.
more
Tilted Drum and Extra
Tilted drum and extra
and unload
to load
Steam
Washing and Refresh
Washing features upgraded washing performance with low energy
consumption. Refresh cycle removes wrinkles from dry clothes.
Steam
water
and
RollerJets
Washing ball enhances the wash performance and reduces damage
clothing. The jets spray and help tumble clothes to enhance
washing performance while maintaining fabric care.
to the
Automatic Wash Load Detection
detects the load and
Automatically
optimizes
the
time.
washing
Built-in Heater
Internal heater
helps
to maintain water
temperature
at its
optimum
level for selected
cycles.
Child Lock
The Child lock
prevents children from pressing any button
to
change
the
settings
during operation.
C
ontents
......................................................................................................................3
Warnings
Specification.................................................................................................................. .5
Installation
...................................................................................................................
Care before
...6
washing....................................................................................................12
Adding detergent..........................................................................................................13
Function
How to
....................................................................................................................14
use
washer ......................................................................................................15
Maintenance ................................................................................................................25
Troubleshooting guide
Terms of
2
Warranty
.................................................................................................28
.......................................................................................................32
W arnings
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING
the
?
:
fire, electric shock,
or
injury
or
store the washer where it will
combustible
exposed to the weather.
Do not
Do not
tamper with controls.
ignite
or
a
repair or replace any part of the washer
attempt any servicing unless specifically
recommended in the user-maintenance
instructions
or
published user-repair
out.
?
?
Keep the area underneath and around your
appliances free of combustible materials such
Close
is
supervision
used by or near
play
as
etc.
?
?
on,
with,
or
Do not leave the washer door open.
An open door could entice children to
?
or
?
?
hang
Never reach into washer while it is
The
on
crawl inside the washer.
until the drum has
moving.
completely stopped.
laundry process
can
Wait
?
?
reduce the flame
retardant of fabrics.
?
Do not wash
cleaned
in,
or
dry
washed
soaked
in,
or
or
whole
explode. Oil may remain in the tub after
cycle resulting in fire during drying. So,
Always follow the fabric care instructions
supplied by the garment manufacturer.
Do not slam the washer door closed
spotted
or
try to
To minimize the
possibility of electric shock,
unplug this appliance from the power supply
or
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
Dryer is intended for only drying textile material.
If the washer has been exposed to water, call an
authorized service provider to avoid any risk of
fire
articles that have been
in,
as
distribution
inside this
any other appliance.
Keep washer away from fire.
the door
(such
disconnect the washer at the household
or
?
substances
force the door open when locked. This could
result in damage to the washer.
is necessary if this appliance
children or infirm persons.
Do not allow them to
explosive
do not load oiled clothes.
instructions
that you understand and have the skills to carry
lint, paper, rags, chemicals,
or
oil, paint, gasoline, degreasers, dry
cleaning solvents, kerosene, etc.) which may
?
?
using
wax,
?
?
to persons when
washer, follow basic precautions, including the following:
Do not install
be
To reduce the risk of
or
electric shock.
with
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
W arnings
To minimize the risk of fire in
?
Items that have been
a
tumble
hazard and should not be
Oil-affected items
sources
Such
as
can
in
a
dryer,
soaked with
spotted
placed
or
in
a
tumble
the
following
vegetable
dryer.
or
should be observed:
cooking
oil constitute
a
fire
ignite spontaneously, especially when exposed to heat
dryer. The items become warm, causing an oxidation
tumble
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
enough to catch fire. Piling, stacking or storing oil-affected items can
become hot
prevent heat from escaping and
so
create
a
fire hazard.
If it is unavoidable that fabrics that contain
vegetable or cooking oil or have been
by
products
placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The 'cool down' cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
contaminated
?
?
hair
be
care
Items that have been previously cleaned in, washed in, soaked in or spotted with
petrol/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
Items
containing
foam rubber
foam) or similarly testured
dryer on a heat setting.
heated, produce fire by spontaneous combustion.
(also
known
as
rubber. like materials should not be dried in
Foam rubber materials can, when
?
Fabric softeners
a
latex
tumble
products should not be used in a tumble dryer to eliminate
electricity unless this practice is specifically recommended by the
the fabric softener or product.
or
similar
the effects of static
manufacturer of
?
Undergarments
dryer.
that contain metal reinforcements should not be
placed
Damage to the tumble dryer can result if metal reinforcements come
drying. When available a drying rack could be used for such items.
?
Plastic articles such
be
?
placed
in
a
as
tumble
shower caps
or
babies
waterproof napkin
loose
covers
a
tumble
during
should not
dryer.
Rubber-backed articles, clothes fitted with foam rubber pads,
placed in a tumble
rubber-coated tennis shoes should not be
4
in
pillows, galoshes
dryer.
and
S pecification
Inlet Hose
Drum
Name
:
Front
:
220-240V~,50Hz
Size
:
686mm(W)
Weight
:
94kg
Wash
Power
supply
capacity
loading washing
x
:
10kg(2200W)
Dry capacity
:
6kg(2150W)
2200W
Max. Watt
:
:
No
Water
:
78ℓ(7.8ℓ/ kg )
consumption
Permissible water pressure
Permissible cold water
temperature : 4-25˚C
Appliance complies
No further backflow
The appearance and
must not exceed 70°C
with the
requirement by
certification
Type
Test Mark.
for connection to the water
protection required
specifications may be
Specifications subject
982(H)
:4.5~145PSI(0.03~1MPa)
supply
:
x
Spin/400/800/1000/1200
The external hot water
TT
machine
767mm(D)
Spin speed
Light
to
change by
varied without notice to
supply.
improve the
units
quality.
manufacturer.
Accessories
Inlet
hose(2EA)
Spanner
5
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin,
pay
all times.
particular
are areas
attention to
Any damage which may
appliance guarantee.
be
cause
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition at
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
?
is fitted with transit bolts to
appliance
Packing
prevent internal damage during transport.
and all transit bolts must be
removed before
using
the washer.
When
unpacking the base, be sure
to remove the additional packing
support in
packing.
Washer
the middle of the base
Packing Support
Base
Removing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
are
along
not
with the rubber
removed, it may
2. Unscrew the 4 bolts with
6
supplied.
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
cause
vibration, noise and malfunction.
the spanner
Packing
heavy
?
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
nstallation
I
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1°
:
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with
more
than
one
appliance.
Laundry
Tub
Additional Clearance
:
For wall, door and floor modeling is required.
(10cm : rear / 2cm : right & left side)
approx.
2cm
Do not place
any times.
They
can
or
store
damage
laundry products
the finish
or
on
top of washer
at
controls.
Positioning
Install the washer
on a
flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
Before placing the washer on tiles, apply a rubber mat under the feet.
?
Never try to correct any
washer.
?
unevenness
in the floor with
pieces of wood,
cardboard
or
similar materials under the
If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.
?
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of
?
?
a
breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
?
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
must be earthed
Green and Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or
by the
earth
symbol
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
(BS 1363) plug
is
used, fit
a
coloured Black.
or
coloured Red.
13 amp BS 1362 fuse.
7
nstallation
I
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
2. If the
3.
4. Connect the machine to
5. The
?
?
?
appliance
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
or
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting water supply
hose
▶Water
supply pressure must be between 0.03MPa and 1MPa
(0.3~10kgf/cm)
▶Don't strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1MPa, a decompression
2
device should be installed.
?
Two rubber seals
are
?
?
?
in order to
are
supplied
with the water inlet hoses these
prevent water leaks.
Check water tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the
hose if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
▶When your washer has
valves,
The Inlet hose which has red connector is for the hot water
?
If the washer has two
valve.
8
two
?
tap.
valves, the energy is saved by using hot
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the
screw
to
2. Push the
rubber
tap.
type inlet hose
screw
connector up till the
packing
with the
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
tap. Then
tight contact
tighten the 4
screws.
Normal Tap without thread &
1. Loosen the upper
connector
touch type inlet hose
one
2. Push the upper
the rubber
screw.
contact with the
Upper
Rubber
Connector
Fixing
packing
screw
the 4
tighten
Middle
Rubber
connector
connector up till
packing
is in
3. Connect the
water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
Connector
tap is
Water
hose
Middle
guide plate.
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
Square tap
9
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the Plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a
of suffocation ! Keep all packaging well away from children
risk
Installation of drain hose
about 100
about 145
cm
cm
?
When
installing the drain hose to a sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage should the drain hose
secure
max.10cm min.60cm
about 105
?
cm
become loose.
Laundry tub
about 100
cm
Hose
Retainer
about 145
cm
Tie
max.
about 105
?
?
?
cm
min.60cm max.10cm
The end of the drain hose should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will protect the
floor from damage due to water leakage.
When the drain hose is too long, do not force
back into the washer. This will
noise, malfunction, and
10
water
cause
abnormal
leakage.
100cm
min. 60cm
strap
max.
100cm
min. 60cm
I
nstallation
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
a corner
appliance
of the
Timber
NOTE
on a
solid and level floor surface,
suspended type flooring
or
excessive vibration and unblance
in
may contribute to
errors.
2. If the floor is uneven, adjust the adjustable feet
not insert pieces of wood etc. under the feet)
Make
preferably
room.
as
required. (do
are stable and resting on the floor and
appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
sure
that all four feet
then check that the
※
NOTE
In the
case
platform,
that the
washing machine is installed
securely fastened in order
risk that it might fall off.
on a
raised
it must be
to eliminate the
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the
machine should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
?
Position each foot
Tile floors
on a
clean, dry and level.
(Slippery floors)
on
sections and stick the
Tread Mate is
※
be
must
flat hard floor.
a
the Tread Mate and level the machine
pieces
on
to
the
dry tile where
self adhesive material used
on
to suit.
machine is
to
(Cut Tread
be
Mate into 70x70
ladders & steps that prevents
slipping.
Rubber
Wooden floors
?
If
?
possible
Cup
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
at least 15mm thick under the washer, secured to at least 2 floor beams with
?
mm
placed.)
install the washer in
one
of the
corners
※
Insert the rubber cups to reduce vibration.
※
Rubber cups
( p/no.
4620ER4002B
)
can
of the
room,
※
screws.
where the floor is
be purchased from the LG spare parts
more
can be
purchased from
hardware suppliers.
It
stable.
department.
Important!
?
?
Proper placement and levelling of the washer ensures long, regular and reliable operation.
must be absolutely horizontal and stand firmly in position.
The washer
?
It must not "Seesaw"
?
The installation surface
?
Do not let the feet of the washer
across corners
must
be
under load.
clean, free from floor wax and other lubricant coatings.
get wet. If feet of the washer get wet,
slipping
may
occur.
11
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C,
clothing.
a
without
This will
remove
add
a
half load of
allow the unit to wash
detergent)
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that
can be washed with the same wash cycle.
spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
soiled items with lightly soiled one.
Water temperature and
Soil
3.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Separate
Separate
Lint
Wash lint
Caring
before
Combine
large
clothes
to amount of soil.
according
white fabrics from colored fabrics.
producers
separately.
and lint collectors
loading
and small items in
a
than half the total wash load.
Do not wash single items. This may
load. Load
cause an
?
large
items first.
items should not be
Large
out-of-balance load. Add
one or
more
two similar items.
Check all
pockets to make sure that they are
empty. Items such as nails, hair clip, matches,
pens, coins and keys can damage both your
washer and your clothes.
?
Close
zippers,
hooks and
strings
that these items don't snag
?
on
to make
sure
other clothes.
Do not be stuck between the door and the
glass.
?
Pre treat dirt and stains
detergent
collars and cuffs to
?
If you wash
help
underwear,
bag. If you don't use the
washing the underwear,
make
12
a
by brushing
a
little
dissolved in water onto stains like
noise.
shift dirt.
use
the wash cloth
wash cloth
bag
while
wires in the bra may
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
?
If too
much
can occur
detergent
is used,
heavy load to
(Causing malfunctions)
result
?
?
?
Main wash
or cause
If there are too many suds,
quantity must be reduced.
Use
too many
and this will decrease the
the
the
suds
washing
motor.
detergent
specified Front loader washing powder
only.
only
?
?PreWash+MainWash
Detergent usage may
for water
temperature,
need to be
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
Tips
Full load
according
:
to
manufacturer's recommendation.
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Softener will
?
Detergent is flushed from the dispenser at
beginning of the cycle.
automatically
cycle.
2
days.
be added
the last rinse
The soap drawer can be partially
opened to add pre dissolved soap
powder during
?
1/2 of full load.
Do not leave the fabric softener in the
during
?
:
the
detergent drawer for more than
(Fabric softener could harden)
?
3/4 of the normal amount.
early dispensing
of the fabric softener which could stain
?
:
Minimum load
the initial fill.
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
the clothes
directly on
13
unction
F
Recommended
Fabric
Program
Cotton
Color fast
according
courses
Type
to the
Proper
Temp.
(Option)
(Cold,
30˚C, 40˚C,
Polyamide, Acrylic,
40˚C
Baby
Lightly
95˚C)
(Cold,
30˚C, 60˚C)
Option
Load
Pre Wash
Rating
129
5.0kg
93
6.0kg
176
5 items
20
4.0kg
58
3.0kg
57
3.0kg
57
5.0kg
30
in
Minutes
Rinse+Spin
Dry Only
Less Steam
Eco Steam
soiled
baby
95°C
wear
Intensive
(Cold, 30°C,
40°C, 60°C)
Cotton mixed,
Refresh
Polyeter mixed
(It just makes
clothes easy to iron)
Dress shirts, blouses
wrinkled
Delicate laundry easily
damaged.
Delicate
with pure
new
wool
only.
40˚C
(Cold, 30˚C)
30˚C
(Cold, 40˚C)
"Hand Wash" marked delicate
Hand
Wash
and wool
Quick 30
Colored
lightely
Cotton
laundry.
Landry
with
with
Intensive
Pre Wash
:
30˚C
(Cold, 40˚C)
filling,
light filling.
Temperature
If the
Intensive
40˚C
Rinse+Spin
(Cold, 30˚C)
Intensive
washing full load or heavily
choosing intensive option.
:
Rinse+Spin
Dry Only
Select the water temperature to the wash cycles.
Always follow garment manufacture's care label or
laundering.
When
:
Intensive
30°C
which is
duvet, pillow, blanket, sofa
cover
Rinse+Spin
(Cold,40˚C)
soiled fast.
bedding
Turbo Steam
--
Wool/Silk Machine washable woolens
laundry
is
soiled
laundry, you
can
1
king size
(9 Tog)
80
instructions when
increase effectiveness
heavily soiled, "Pre Wash" option is recommended.
Cotton, Synthetic and Baby Care Program.
Pre Wash is available in
14
Maximum
Turbo Steam
Care
Water
Time
Additional
60˚C
garments
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton (underwear...)
Synthetic Polyester.
Duvet
laundry type
by
ow
H
1. Cotton
to
use
washer
selected upon power
?
Press the
Power(
?
Press the
Start/Pause(
?
Initial condition
-
-
-
-
)
:
Water
temperature
Spin
1200 rpm
Program
:
on.
button to start.
Normal
Rinse
:
2. Manual
automatically
)
button.
?
Press the
?
Select the conditions which you want to
use, by pressing each button.
Power(
)
button to start.
selecting the each conditions, please
refer to the page16~page24
For
?
:
Selecting
Press the Start/Pause button.
60°C
Cotton
15
H
ow
to
use
(1)
washer
(2)
(1)Button: Power
(2)Dial: Program
(3)Button: Start/Pause
(4)Button: Option
(3)
(4)
(5)
(5)Child lock
(6)Button: Rinse
(7)Button: Temperature
(8)Button: Intensive
(8, 9, 10)
(6) (7)
(11) (12)
(9)Button: Favorite
(10)Button: Time Delay
(11)Button: Spin
(12)Button: Turbo Steam
Power
(13)
(13)Dial: Dry
Program
1. Power
?
Press the
Power(
on
and off.
power
?
To cancel the Time
Power(
)
)
button to turn
Delay function, the
pressed.
?
button should be
?
?
Power(
) button is pressed,
washer is ready for Cotton program.
And the other initial conditions
?
So, if you
as
the
washing cycle
changing
program, just press Start/Pause(
)
button and then the washer will proceed.
Initial program
-
Cotton
Program
1200rpm
16
Lamp
will
light
according
to the
up to indicate selected
When
-
the
By turning
Program dial,
selected in order of "Cotton
Delicate
--
Wool/Silk
--
Quick 30
For
/ Rinse:Normal / 60°C/
) button is pressed,
automatically
Start/Pause(
the Cotton program is
selected.
follows.
want to advance into the
without
available
program.
When the
the
are
laundry type.
2. Initial Program
?
9 programs
--
--
Refresh
the program is
--
Synthetic
Hand Wash
--
Baby
--
Care".
information regarding laundry type for
please refer to page 14.
each program,
--
Duvet
H
ow
to
use
washer
Option
Start/Pause
?
By pressing
the
button, only
one
option
option
functions may be selected.
1. Start
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
cycle.
1. Pre Wash
2. Pause
?
If
temporary stop of wash cycle is needed,
?
?
When in Pause, the power is turned off
automatically after 4 minutes.
Use this
for loads that need
option
pretreatment. This adds
press "Start/Pause" button.
washing
-
before
17 minutes of pre
draining.
When
using Pre Wash option, do not
liquid detergent for the main wash.
Use powder for the main wash.
use
a
?
Available in Cotton,
Baby Care.
2. Rinse
?
Use this
3. Dry
?
+
Synthetic
and
Spin
to rinse and then
option
spin
Only
When you want dry only, select the this
option. Available in Baby Care, Cotton,
Synthetic and Quick30.
4. Less Steam
?
When you want to do a steam wash for
only a small amount of laundry, select the
this
opton.
5. Eco Steam
?
When you want to do a steam wash for
reducing the electricity consumption,
select the this
opton.
17
H
ow
to
washer
use
Rinse
Child lock
?
By pressing
button,
the Rinse
the Rinse
type
can
be selected.
-
Normal
If you choose to lock the buttons on the
control assembly to prevent tampering, this
-
Rinse +
-
Medic Rinse
function may be selected.
-
Normal+Hold
-
Rinse + +Hold
?
Child lock
can
be set
by pressing
and
holding the Option and Rinse button
simultaneously. (About three seconds)
1. Normal
?
Cotton
(forfull load),Synthetic,Duvet,Baby
Care performs 3 Rinses
?
?
When child lock is set, all buttons
are
inoperable
except for power button.
?
?
When child lock is set,
and
time are displayed by turns.
remaining
2. Rinse + & Medic Rinse
?
system, press and
and Rinse button
Option
simultaneously again. (About
three
Used to additional
in
To deactivate Child lock
hold the
Cotton (for part load), Delicate, Wool/Silk,
Hanwash, Quick 30 performs 2 Rinses.
?
seconds)
rinse, which may assist
traces of
removing
By selecting
Rinse +
detergent
or
residue.
Medic Rinse
function, the Rinse Time and the Rinse
water are increased.
?
Medic Rinse includes water
heating
in the
last rinse.
?
To
change
to the desired program, whilst in
child lock mode.
1. Press and hold both
Option
together once again.
(About three seconds)
3. Rinse Hold
and Rinse
button
?
by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
?
To
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
Is selected
Change
the desired
program
proceed
Rinse
a
dial
or
desired
to a Drain or
Spin
hold, select Drain
function after
the program
selector button to the
on
press the Spin
speed, then press the Start/Pause
button.
?
The child lock
is
automatically
errors occur.
18
be set at any time and it
canceled when operational
can
The
required lamp
will
light up for identification.
H
ow
to
use
washer
Spin
?
Water Temperature
By pressing the Spin button,
spin speed can be chosen.
the
By pressing
?
the
Temp.
button, the water
temperature can be
selected.
-
Cold
-30˚C/40˚C/60˚C/95˚C
?
1. Spin selection
Spin speed
?
as
-
-
is available
according
to the program
-
follows.
can
be selected
as
below
to the program.
Cotton, Baby Care
Cold--30°C--40°C--60°C--95°C
Cotton & Quick30
-
NoSpin--400--800--1000--1200
Baby Care & Synthetic & Wool/Silk
Synthetic
Cold
&
-
--
30°C
--
40°C
--
60°C
Delicate & Wool/Silk & Handwash &
Quick30 & Duvet
NoSpin--400--800--1000
Cold
--
30˚C
--
40˚C
Delicate
NoSpin--400--800
The required temperature lamp
identification.
For the
2. No spin
?
temperature
according
Handwash & Duvet
-
Water
required lamp
detailed
light up for
information, please refer to
the page14.
If "No Spin" is selected,
draining water.
The
more
will
will
the washer
stops after
light up for identification.
19
H
ow
to
use
washer
Time
Favorite
?
?
Delay
Favorite program allows you to store a
customized wash cycle for future use.
To make
1. Select
Favorite program:
a
a
Preparing washing before starting
Turn on the water tap.
cycle.
2. Select
"Time
Delay"
-
The course, washing method, number
of rinses, spin speed, water
temperature, dry, turbo
-
-
steam etc.
Load
laundry and close the door.
detergent and fabric softener
Place the
in
the drawer.
3. Press and hold Favorite button 3
seconds
(2 beep sounds).
?
The Favorite program is now stored for
future use. To reuse the program, select
Favorite program and press Start/Pause.
How to set "Time
-
-
-
Delay"
Power( ) button.
Turn the Program dial to select
the program you require.
Press Time Delay button and set
Press
Intensive
-
Press the
"
("
?
?
?
washing full load or heavily soiled
laundry, you can increase effectiveness
by choosing intensive option.
option, the
extended, depending
?
To
this
use
button
once
press the Intensive
before the wash program is
button.
Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
If Time
?
Each pressing of the
delay by one hour.
?
To cancel the time
Power(
option
?
started.
Time
?
button advances time
delay, press
the
button.
)
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
present
or
is
to the
selected
According to
the condition
temperature, the
washing time
20
)
hours.
the Intensive
wash time may be
on the program selected.
Start/Pause(
lamp is blink)
19:00 hours and the minimum time is 3:00
When
By selecting
the
desired time.
delayed
may vary.
of water supply and
time and the actual
ow
H
to
washer
use
Refresh
Turbo Steam
?
For
tough
stained clothes,
or baby clothes.
underwear,
?
Refresh
Steam Wash is available with
been stored for
Baby Care, Cotton, Synthetic,
It
option features upgraded washing
performance with low energy and water
consumption.
Do not load delicates such
?
and
easily
as
How to
1. Turn
wool, silk,
discolored clothes.
-
Steam wash is
a
highly
use
Refresh
cycle
the washer and select the
Refresh program.
or less and close the door.
concentrated and
Steam spray may not be seen clearly
through the door; however, the washer
spraying steam strongly inside.
During
the steam
operation,
a
[Precautionary Notes]
The Refresh cycle is not
drying cycles.
-
-
is
spraying
sound will be heard. This is not
-
a
Steam
can cause severe
burns.
or
fibers, this
recommended for 100% cotton
Remove stains from
clothing before using the
cycle to prevent permanently setting
stains by high heat.
the
CAUTION
washing
Refresh
-
Do not reach into the washer while
like other
Due to the characteristic of cotton
cycle is not
clothing.
malfunction.
!
on
3. Press the Start/Pause button.
efficient. It may seem there is no water
inside the drum, but this is normal.
-
easy to iron
2. Load 5 items
NOTE:
-
clothes which have
extended time.
Wrinkles will be reduced.
?
This
an
just makes wrinkled clothes
(Do not load wet clothes).
Refresh.
?
cycle
slightly wrinkled
For
?
Be
a
operating.
-
sure
that the faucet is open. This
produce steam.
cycle
uses
little water to
Be careful not to touch the door. It
can
be very
hot.
-
Do not open the door while operating.
can cause severe burns.
Steam
-
After
removing clothes from
the Refresh
cycle
may feel slightly damp wait at least 10
minutes before putting the clothes on.
they
-
Best result
are
achieved when articles
are
of
similar size and fabric
(Load
!
-
CAUTION:
Do not reach into the washer while
Steam
-
less than 3
type. Do not overload
dress shirtes)
can cause severe
Keep pets away from
operating.
burns.
the washer.
21
H
to
ow
washer
use
Dry
NOTE
The maximum
drying capacity for this
loading, please
maximum drying capacity
model is
use
the
When
6kg.
indicator behind the door
as
shown
Automatic
1.Drying
?
below.
guide
Use your Automatic Cycles to dry most loads.
Electronic sensors measures the temperature
of the exhaust to increase
decrease
or
drying
temperatures for faster reaction time and
tighter temperature control.
?
Recommend Automatic
clothes
6kg
a)
b)
c)
d)
6
For
drying
course
for
type.
Synthetics
select
-
Low
Temp.
If you want to iron clothes-Iron.
For Cottons select Normal.
-
For washable
nappies
select
-
More
NOTE: The estimated
drying time varies
drying time with an Automatic.
The type of fabric, size of the load, and the
dryness selected, do affect the drying times.
from the actual
The standard
how much
?
Do not overload above the maximum
capacity indicator.
tumble freely.
?
This
?
For most
drying
Items must be able to
Sorts of
washer-dryer's automatic process from
washing to drying can be selected easily.
even
drying
the clothes load
are
,
make
sure
?
laundry
all articles in
similar in material and
thickness.
?
Single
weight
If you open door and remove load before dryer
has finished its cycle, remember to press the
Sorts of
Start/Pause button.
laundry
By turning
the
dial, you
can
?
Temp
Iron
After the end of
dry,
By pressing
"
"
is
displayed.
the "Start/Pause" button the
program can be ended. If you not press the
"Start/Pause" button, the
cycle will end
"
automatically
22
after 4 hours.
Short-
Diaper
Shirt
100g
200g
300g
Underwear
Nightclothes
Jean
50g
500g
1200g
sleeved
select.
Normal More 30 60 90 120 150
Low
laundry weight which shows
laundry to put into the washer.
"
Single
weight
2.Drying
By turning
?
can
to
use
time
guide
ow
H
the
Dry button,
washer
the
3.Completion of Drying
drying
?
time
be selected.
?
?
?
-
woven
drying
are
is
operating periodically tumbles,
"
?The"
the clothes
button is
message will continue to display until
removed or the Start/Pause
are
pressed within the 4
completed.
hours after the
has been
Always
stretch them out
Door Lock
loop knit materials may
shrinks, by varying amounts, depending on
their quality.
and
Do not overload your
Take out
the
immediately
after
drying.
Synthetics
Always
or
Lights
whenever the door of the washer is
locked.
as soon
?
to reduce wrinkles.
Leather Materials
The door
can
be unlocked
Start/Pause button to
?
The door
can
be
stop
opened
by pressing
the
the washer.
after
a
short
delay.
check the manufacture's instructions.
Baby
Always
dryer
permanent press articles
dryer stops
Fiber
-
The Cool Down
dry woolen articles. Pull them
original shape and dry them flat.
Some
as
-
after the
rearranges and fluffs the load to avoid wrinkles
without heat for up to 4 hours.
?
-
will form if the clothes
completed.
?
drying
Permanent Press and
-
creases
immediately
Do not tumble
to their
-
Wrinkles and
not removed
Woolen Articles
-
drying cycle is completed,
[Cool
is displayed on the Multi display.
The Cool Down is setting automatically when a
drying cycle is complete.
Down]
Drying course can last up to 150min. When
selecting drying only, drying course will
start after spining.
These drying times are given as a guide to
help you set your dryer for manual drying.
Drying times can vary greatly depending on
dampness, room temperature and type of
fabric and your own experience will be your
best guide.
?
"
"
When
clothes and
Night
Drum
Gowns
check the manufacture's instructions.
?
Light
The Drum
Light comes on when the Power
pressed. It goes off when the door
is closed and the washer starts operation.
The Drum Light remains off when the door
button is
Rubber and Plastics
-
Do not
dry any items made from or
containing rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Fiber
-
?
is locked.
?
The Drum
Light comes on when the
washing cycle is finished and goes off
4~8
minutes later.
glass
Do not
dry fiberglass articles in your dryer.
particles left in the dryer could be
picked up by your clothes the next time
you use the dryer and irri tate your skin.
Glass
23
ow
H
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
"
display
4. Time left
When Child lock is selected, the
lamp is on.
?
washing
""
?
After the end of
?
When time
dry,
"
"
is
?
displayed.
?
the
delay is selected, it shows
remaining times to finish the selected
During washing cycle, the remaining
washing time is displayed.
Recommended program
-Refresh
program.
-Baby
2. Self
diagnose display
If the washer encounters
operation,
displayed.
"
"
"
Care
"
"
"
"
"
"
"
"
"
"
during
the associated fault will be
-Delicate
around 58 minutes
Problem of
:
Door is not closed
-Quick30
:
Over load in motor
?
overfilling
:
Water inlet trouble
:
Drainage
:
Unbalanced load
"
water
:
Water
temperature trouble
heater
Dry
or
thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page31 and
follow the guide.
around 57 minutes
:
-Hand Wash
-Duvet
:
:
around 57 minutes
around 1 hour and 20 minutes
:
around 30 minutes
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
trouble
"
:
24
:
:
error
around 1 hour and 33 minutes
-Synthetic
-Wool/Silk
sensing
:
around 2 hours and 9 minutes
:
Water pressure
:
"
fault
:
"
"
a
around 20 minutes
:
around 2 hours and 56 minutes
-Cotton
?
by
manufacturer.
conditions.
?
If
an
unbalanced load is detected
the suds
or
if
removing
program operates,
the wash time may be extended.
(Max. increasing
time is 45
minutes.)
aintenance
M
Before
the washer
cleaning
interior, unplug the electrical power cord
to avoid electrical shock to
avoid electrical shock hazards.
When
disposing of the appliance, cut off the mains cable,
prevent young children being trapped inside.
and
destroy the plug
Disable the door
lock to
The water inlet filter
"
-"
-
message will blink
error
detergent
the control
on
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the filter
CAUTION
is clean to
First drain the water
remove
tangled
Be careful when
using
threads
or
1.
Open
cap
opening
or
the lower
cover
( ) by using
a
the door in
2.
this time
plug ( )
water
pull
out
the hose.
machine.
foreign objects.
cleaning
the drain pump,
carrying
out emergency
emergency.
use a
flowing
laundry.
running of your
the drain hose and then open the pump filter to
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
to
an
left in the
smooth
if the water is hot.
draining
Allow the water to cool down before
emptying
objects
ensure
vessel to
on
3. Remove out any
At
prevent
to the floor. When
cleaning,
material
After
( )
clockwise and insert the drain
)to the original place.
plug (
the pump filter
close the lower
( )
( ).
turn the pump filter
water does not flow any more, turn
open to the left.
foreign
from the pump filter
cover
cap.
3
1
2
25
aintenance
M
Dispenser drawer
After
a
while
detergents
and fabric softeners leave
?
It should be cleaned from time to time with
?
If necessary it
can
be removed
a
deposit
in the drawer.
a jet of running water.
completely from the machine by pressing
?
by pulling it out.
cleaning, the upper part
the catch
downward and
To facilitate
The drawer
Detergent
can
be cleaned
?
The
?
also accumulate inside the
washing
If you live in
seen
with
occasionally
without
cycle
a
an
recess
cleaning, replace
which should
the drawer and
run a
drum
easily
repairs
continuously
build up in
where it cannot be
clogs appliances,
and if it is not
kept
in check,
expensive
may result.
Although the washing drum is made of Stainless steel, specks of rust
articles (paper clips, safety pins) which have been left in the drum.
?
The
?
If you
use
places
removed.
?
washing
be removed.
laundry.
Over time the build up of scale
or
can
old toothbrush.
hard water area, lime scale may
and thus not
maintenance
compartment
recess
Once you have finished
rinse
of the fabric softener
can
be caused
descalling agents, dyes
or
bleaches, make
Descaler may contain chemicals that may
Remove any
26
use
small metal
drum should be cleaned from time to time.
sure
they
are
suitable for
washing
use.
Never
by
spots with
steel wool.
a
stainless steel
damage part of your washing
cleaning agent.
machine.
machine
aintenance
M
The water circulation nozzle & steam nozzle
?
Clean the water circulation
nozzle, if clogged.
Cleaning your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
cloth.
damp
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
through
opening, flexible gasket and
complete cycle using hot water.
Remove hard water
machine.
Winterizing
deposits using only
an area
4. Add
as
safe for
washing
where
freezing may occur or moved in freezing
prevent damage to the washer:
supply tap.
2. Disconnect hoses from water
Plug
cleaners labeled
follow these instructions to
1. Turn off water
3.
glass.
instructions
If the washer is stored in
temperatures,
door
if necessary.
Repeat process
NOTE
a
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
dispenser drawer,
8. Store washer in
9. To
remove
through
a
cord, dry
an
up
for 1minute to drain out all water.
expelled.
the drum
drain and
dry
interior, and close the door.
excessive water from the
compartments.
right position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
27
T roubleshooting guide
This
washing machine is equipped with automatic safety functions
diagnose faults at an early stage and react appropriately.
When the machine does not function properly or does not function
following points before you contact your service provider.
?
all, check the
at
Possible Cause
Symptom
Rattling and
clanking noise
which detect and
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
redistribute wash load.
Have all the transit bolts and
packing
If not removed
been removed?
Are all the feet
the
If sound continues, washer is
out of balance. Stop and
probably
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
clogged.
are
Unclog
drain
pipe.
Contact
plumber
if necessary.
?
Over
There is
Clean the
the
something between
gasket and the glass.
the
sudsing
Water does not enter
washer
slowly
or
gasket and
with the towel.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
leaks, and vibration during spin.
?
it enters
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
clogged.
28
glass
Fully
is not
hose(s)
are
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
T roubleshooting guide
Possible Cause
Symptom
Water in the washer
does not drain
drains
or
?
Drain hose is kinked
?
The drain filter is
slowly.
Washer does not start
?
or
Solution
clogged.
clogged.
Clean and
straighten
the drain hose.
Clean the drain filter.
Electrical power cord may not be
in or connection may be
plugged
Make
plug
sure
fits
tightly
in wall
outlet.
loose.
?
House fuse blown, circuit breaker
tripped,or a power outage has
occurred.
Reset circuit breaker
Do not increase fuse
If
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace fuse.
capacity.
or
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
Close the door and press the
Start/Pause button. After pressing the
firmly
shut.
Start/Pause button, it may take
few moments before the clothes
a
washer
begins to spin. The door must
spin can be achieved.
lock before
Once started, the door
Door does not open
opened for safety
Wait
one or
can
not be
reasons.
two minutes before
opening the door to give the electric
locking mechanism time to release.
Display
on
stuck
6min left.
Check the
of clothes.
the condition of the clothes at
The
clothes
6min left to evaluate if
should be less then
This
dried
washing
or
machine checks
they
not. If the clothes
are
are
weight
weight of the
6kg.
not
dried, the washing machine will
further
dry
display
will then continue to count
for 30min. The 6min
down after 30min.
29
T roubleshooting guide
Possible Cause
Symptom
Wash
cycle
delayed
time
?
It takes time to balance the
laundry
before the
spin cycle
Solution
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds
removing program works, the
wash time shall be increased.
Stop the wash and pull out the
laundry then put it again to untwist
Dry problem
?
Does not
dry
Do not overload.
Check that the washer is
properly to
extract
draining
adequate water
from the load.
Clothes load is too small to tumble
property. Add
30
a
few towels.
T roubleshooting guide
Possible Cause
Symptom
?
Water
?
Water
?
?
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Solution
Check another
tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet
hose(s).
clogged.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
appliance
or clogged.
clogged.
has
an
unbalance
detection and correction
system. If
or
straighten the drain
2 similar items to
Rearrange
spinning
hose.
help
load to allow proper
individual
heavy articles are loaded (ex.
etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
bath mat, both robe,
?
?
Is the door
Close the door
not
If
opened or
completely closed?
"
Unplug the
?
Water overfills due to the
faulty water
valve.
completely.
"is not released, call for service.
power
Close the water
Unplug the
tap.
power
Call for service.
?
Water level
?
Over load in motor.
?
Check water
sensor
plug and call for service.
plug.
has malfunctioned.
Turn the
supply.
If
plug
tap
on
is not released,
and call service.
unplug power
31
T
erms
of Warranty
What Is Not Covered:
?
Service
?
If the
product
rating plate.
?
If the fault is caused
by accident, neglect,
If the fault is caused
by
?
to your home to teach you how to
trips
is connected to any
voltage
use
the
product.
other than that shown
misuse
on
the
Act of God.
or
factors other than normal domestic
use or use
in
accordance with the owner's manual.
?
Provide instruction
?
If the fault is caused
?
Noise
or
on use
by pests
product
for
or
change
example,
rats
vibration that is considered normal for
sound, spin sound,
?
of
Correcting
or
the
or
set-up of the product.
cockroaches etc..
example
water drain
warming beeps.
the installation for
example, leveling
the
product, adjustment
of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by
the owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
fuses in
correct house
?
Replace
?
Correction of unauthorized
?
Incidental
possible
?
If this
or
or
wiring
or
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
32
of
a
M
emo
33
M
34
emo
Download PDF

advertising